IBM2260-OPT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
42

cdx6500PPCTIBM2260PortTable

table mandatory
.1.3.6.1.4.1.449.2.1.2.1.1.20 · 1 row entry · 15 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk cdx6500PPCTIBM2260PortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IBM2260-OPT-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IBM2260-OPT-MIB::cdx6500PPCTIBM2260PortTable' 
A list of IBM2260 Port configuration entries.
cdx6500PPCTIBM2260PortEntry row .1.3.6.1.4.1.449.2.1.2.1.1.20.1
An IBM2260 Configuration Table entry. Each entry
contains the configuration parameters for a single
IBM2260 port.
Indexes
Column Syntax OID
cdx6500IBM2260CfgPortNumbermandatory
The port number corresponding to this port.
Integer32
Constraints:
range: 1-54
 .1.3.6.1.4.1.449.2.1.2.1.1.20.1.1
cdx6500IBM2260CfgPadTypemandatory
Indicates whether the port is functioning as a Terminal
PAD (TPAD) or a Host PAD (HPAD).
Enumeration
Enumerated Values:
1tpad
2hpad
 .1.3.6.1.4.1.449.2.1.2.1.1.20.1.2
cdx6500IBM2260CfgPortSpeedmandatory
This is the speed of the port in bits per second, when using
internal clocking.
Enumeration
Enumerated Values:
4speed1200
8speed1800
13speed2400
14speed4800
15speed9600
16speed19200
99speed7200
 .1.3.6.1.4.1.449.2.1.2.1.1.20.1.3
cdx6500IBM2260CfgConnTypemandatory
Specify the control signal handshake required for a
connection to be made to this port:
simp - simple, no control signals required.
simpa - CTS follows RTS, but no control signals required.
Enumeration
Enumerated Values:
1simp
16simpa
 .1.3.6.1.4.1.449.2.1.2.1.1.20.1.4
cdx6500IBM2260CfgNumDevicemandatory
Specifies the number of IBM2260 stations on this line.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.449.2.1.2.1.1.20.1.5
cdx6500IBM2260CfgServiceTimermandatory
The Service Timer specifies the interval of time in
seconds between periodic servicing. Such servicing
includes intervals between attempts to establish network
connections, intervals between attempts in TPAD to poll …
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.449.2.1.2.1.1.20.1.6
cdx6500IBM2260CfgThreshCtrmandatory
Indicates number of consecutive errors that can occur
before a station is considered down.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.449.2.1.2.1.1.20.1.7
cdx6500IBM2260CfgRespTimeoutmandatory
Specifies the amount of time in msec the PAD allows
a terminal, printer or host to respond. As a result,
the TPAD may re-transmit the previous message or abort
the current procedure.
The HPAD aborts the current procedur…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.449.2.1.2.1.1.20.1.8
cdx6500IBM2260CfgPortSubAddrmandatory
Calls addressed to this node and with this subaddress
will be routed to this port.
DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.20.1.9
cdx6500IBM2260CfgPortOptmandatory
Select options on this IBM2260 port as follows:
NONE - No option specified
ORG - Originate calls from this port
ACK - DSP End-to-End Acknowledgements are to be used
Any combination of above specified by summing (e.g. …
DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.20.1.10
cdx6500IBM2260CfgRestConnDestmandatory
All calls originating from this port will be routed to the
destination specified in this parameter, irrespective of route
selection table entries.
For example, to route calls to port 1, use P1. To route
calls to port 2…
DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.20.1.11
cdx6500IBM2260CfgBillRecmandatory
This controls whether billing (accounting) records will be
created for calls on this port.
Enumeration
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.449.2.1.2.1.1.20.1.12
cdx6500IBM2260CfgElectricalInterfaceTypemandatory
Specify the Electrical Interface Type:
V.24 - V.24 Electrical Interface Type
V.35 - V.35 Electrical Interface Type
V.36 - V.36 Electrical Interface Type
X.21 - X.21 Electrical Interface Type

Note: Cha…
Enumeration
Enumerated Values:
1v24
2v35
3v36
4x21
 .1.3.6.1.4.1.449.2.1.2.1.1.20.1.13
cdx6500IBM2260CfgV24ElectricalInterfaceOptionmandatory
Specify the Pin 22 option:
RI - V.24 uses Pin 22 for Ring Indicator output signal
TM - V.24 uses Pin 22 for Test Mode input signal
Enumeration
Enumerated Values:
1ri
2tm
 .1.3.6.1.4.1.449.2.1.2.1.1.20.1.14
cdx6500IBM2260CfgHighSpeedElectricalInterfaceOptionmandatory
Specify the cable type:
NONE - V.35/V.36/X.21 DCE with straight through cable
XOVER - V.35/V.36/X.21 DCE with crossover adapter cable
Enumeration
Enumerated Values:
1none
2xover
 .1.3.6.1.4.1.449.2.1.2.1.1.20.1.15

cdx6500SPCTIBM2260StationTable

table mandatory
.1.3.6.1.4.1.449.2.1.2.1.3.6 · 1 row entry · 7 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk cdx6500SPCTIBM2260StationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IBM2260-OPT-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IBM2260-OPT-MIB::cdx6500SPCTIBM2260StationTable' 
All of the configuration parameters relevant
to the IBM2260 Station table.
cdx6500SPCTIBM2260StationEntry row .1.3.6.1.4.1.449.2.1.2.1.3.6.1
A row of IBM2260 station configuration parameters.
Indexes
Column Syntax OID
cdx6500IBM2260sCfgPortNummandatory
Port number.
Integer32
Constraints:
range: 1-54
 .1.3.6.1.4.1.449.2.1.2.1.3.6.1.1
cdx6500IBM2260sCfgStationNummandatory
Station number.
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.449.2.1.2.1.3.6.1.2
cdx6500IBM2260sTypemandatory
single - configures a single station addressable by
the ADDR1-ADDR2 address pair.
group - configures a group of stations addressable
by the ADDR1 address character, but ADDR2 is
assumed to be 40H, 41H, 42H and 43H.
…
Enumeration
Enumerated Values:
1single
2group
 .1.3.6.1.4.1.449.2.1.2.1.3.6.1.3
cdx6500IBM2260sStationAddr1mandatory
This is the first byte of this Station's address.
The Station address consists of two hexadecimal digits.
The valid range for a digit is: 20-7F;
DisplayString .1.3.6.1.4.1.449.2.1.2.1.3.6.1.4
cdx6500IBM2260sStationAddr2mandatory
This is the second byte of this Station's address.
The Station address consists of two hexadecimal digits.
The valid range for a digit is: 20-7F
DisplayString .1.3.6.1.4.1.449.2.1.2.1.3.6.1.5
cdx6500IBM2260sCallMnemmandatory
This mnemonic name is used if this port is
configured for originating connection requests.
DisplayString .1.3.6.1.4.1.449.2.1.2.1.3.6.1.6
cdx6500IBM2260sStationEnablemandatory
This parameter is used to disable/enable a station.
Enumeration
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.449.2.1.2.1.3.6.1.7

cdx6500PPSTIBM2260PortTable

table mandatory
.1.3.6.1.4.1.449.2.1.3.1.1.19 · 1 row entry · 20 columns
Open in standard view
Uses the ibm variant from /opt/observium/mibs/ibm.
Command help
Walk cdx6500PPSTIBM2260PortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IBM2260-OPT-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IBM2260-OPT-MIB::cdx6500PPSTIBM2260PortTable' 
A list of IBM2260 Port statistics.
cdx6500PPSTIBM2260PortEntry row .1.3.6.1.4.1.449.2.1.3.1.1.19.1
An IBM2260 Statistics Table entry. Each entry
contains the statistics for a single IBM2260 port.
Indexes
Column Syntax OID
cdx6500IBM2260StatPortNumbermandatory
Physical port number
Integer32
Constraints:
range: 1-54
 .1.3.6.1.4.1.449.2.1.3.1.1.19.1.1
cdx6500IBM2260StatPortStatusmandatory
Operational Status of the port.
The different operational statuses are:
UP : At least 1 station is responding to polls.
DOWN : None of the stations are responding to polls.
DISABLED : The port is disabled by …
DisplayString .1.3.6.1.4.1.449.2.1.3.1.1.19.1.2
cdx6500IBM2260StatPortStatemandatory
Current State of this port.
DisplayString .1.3.6.1.4.1.449.2.1.3.1.1.19.1.3
cdx6500IBM2260StatPortSpeedmandatory
The measured port speed in bits per second.
Enumeration
Enumerated Values:
1speed1200
2speed1800
3speed2400
4speed4800
5speed7200
6speed9600
7speed19200
 .1.3.6.1.4.1.449.2.1.3.1.1.19.1.4
cdx6500IBM2260StatPortUtilinmandatory
The amount of the port's bandwidth that is being utilized;
because IBM2260 is a half-duplex protocol the utilization
is calculated as the sum of the receive and transmit
utilization.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.449.2.1.3.1.1.19.1.5
cdx6500IBM2260StatPortUtilOutmandatory
The amount of the port's bandwidth that is being utilized;
because IBM2260 is a half-duplex protocol the utilization
is calculated as the sum of the receive and transmit
utilization.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.449.2.1.3.1.1.19.1.6
cdx6500IBM2260StatParityErrorsmandatory
The number of character parity errors counted by the I/O
driver.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.449.2.1.3.1.1.19.1.7
cdx6500IBM2260StatOverrunErrorsmandatory
The number of received character overruns counted
by the I/O driver.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.449.2.1.3.1.1.19.1.8
cdx6500IBM2260StatFramingErrorsmandatory
The number of asynchronous chracters received which violated
the character framing of start and stop bits.
Note, this statistic is only valid if the port is configured
for ASYNC line interface.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.449.2.1.3.1.1.19.1.9
cdx6500IBM2260StatBCCErrorsmandatory
The number of BCC errors counted by the I/O driver.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.449.2.1.3.1.1.19.1.10
cdx6500IBM2260StatNoResponsemandatory
The number of times the response timer has expired.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.449.2.1.3.1.1.19.1.11
cdx6500IBM2260StatCharInTotalmandatory
Total number of chracters received to present.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.449.2.1.3.1.1.19.1.12
cdx6500IBM2260StatCharOutTotalmandatory
Total number of chracters transmitted to present.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.449.2.1.3.1.1.19.1.13
cdx6500IBM2260StatCharInSecondmandatory
Average number of characters received to present.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.449.2.1.3.1.1.19.1.14
cdx6500IBM2260StatCharOutSecondmandatory
Average number of characters transmitted to present.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.449.2.1.3.1.1.19.1.15
cdx6500IBM2260StatPosAckInmandatory
Number of ACKs received.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.449.2.1.3.1.1.19.1.16
cdx6500IBM2260StatPosAckOutmandatory
Number of ACKs transmitted.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.449.2.1.3.1.1.19.1.17
cdx6500IBM2260StatNegAckInmandatory
Number of NAKs received.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.449.2.1.3.1.1.19.1.18
cdx6500IBM2260StatNegAckOutmandatory
Number of NAKs transmitted.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.449.2.1.3.1.1.19.1.19
cdx6500IBM2260StatMsgRetranmandatory
Number of messages retransmitted due to NAKs or timeouts
to present.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.449.2.1.3.1.1.19.1.20