IBM-LES-BUS-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
4
Rows
4
Columns
39
.1.3.6.1.4.1.2.6.118.1.2.1.1.1.1
·
1 row entry
·
26 columns
Uses the ibm variant from
Command help
/opt/observium/mibs/ibm.
Walk ibmLesBusConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IBM-LES-BUS-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IBM-LES-BUS-MIB::ibmLesBusConfTable'
This table contains configuration information for the LESs within the scope of the agent.
Each entry in this table represents a
LES. The parameters in each entry apply
to one emulated LAN served by one LES.
Objects lesLanType and lesMaxFrameSize
are also required besides lesRowStatus
during row creation.
LES. The parameters in each entry apply
to one emulated LAN served by one LES.
Objects lesLanType and lesMaxFrameSize
are also required besides lesRowStatus
during row creation.
Indexes
lesConfIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
atmDevNummandatory Identifies ATM device to be used by LES/BUS. | Integer32r/w Constraints: range: 0-255 | .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.1 | ||||||
useBurnedInEsimandatory Specifies whether a MAC Address burned into the ATMdevice should be used as the End System Identifier component of the LES/BUS ATM Address. | SNMPv2-TC-v1TruthValuer/w Type Values:
| .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.2 | ||||||
configuredEsimandatory Locally Administered End System Identifier that is to beused as the ESI component of the LES/BUS ATM Address. If this object is used do not use the ATM Forum elanLecAtmMask. If both are used the last object set will ta… | NWAYSMSS-MIBAtmPrivateAddrEsi Type Constraints: range: 6 | .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.3 | ||||||
configuredSelectormandatory Specifies value to be used as Selector field componentof LES/BUS ATM Address. If this object is used do not use the ATM Forum elanLecAtmMask. If both are used the last object set will take affect. | NWAYSMSS-MIBAtmSelector Type Constraints: range: 1 | .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.4 | ||||||
leArpResponseDestmandatory When the value is ALL_CLIENTS, LE_ARP_RESPONSEframes initiated or forwarded by the LES are sent to all clients on the Point-to-Multipoint Control Distribute VCC(s). When the value is ONE_CLIENT, LE_ARP_RESPONSE frames… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.5 | ||||||
use2ControlDistributeVccsmandatory When TRUE, proxy clients are placed on onePoint-to-Multipoint Control Distribute VCC and all other clients are placed on another Point-to-Multipoint Control Distribute VCC. When FALSE, all clients are placed on a singl… | SNMPv2-TC-v1TruthValuer/w Type Values:
| .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.6 | ||||||
use2MulticastForwardVccsmandatory When TRUE:- proxy clients are placed on one Point-to-Multipoint Multicast Forward VCC and all other clients are placed on another Point-to-Multipoint Multicast Forward VCC, - all 'unknown' unicast frames and all … | SNMPv2-TC-v1TruthValuer/w Type Values:
| .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.7 | ||||||
validateBestEffortPcrmandatory When false, Best Effort Control Direct or Multicast SendVCCs will be accepted without regard to the signalled forward Peak Cell Rate (PCR). When true, Best Effort VCCs will be rejected if the signalled forward PCR exc… | SNMPv2-TC-v1TruthValuer/w Type Values:
| .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.8 | ||||||
controlDirectMaxReservedBwmandatory Defines the maximum acceptable Sustained Cell Rate (SCR)for a Control Direct VCC; if SCR is not specified on the incoming call, then this parameter defines the maximum acceptable Peak Cell Rate (PCR) for a Control Dire… | NWAYSMSS-MIBBandwidthr/w | .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.9 | ||||||
multicastSendMaxReservedBwmandatory Defines the maximum acceptable Sustained Cell Rate (SCR)for a Multicast Send VCC; if SCR is not specified on the incoming call, then this parameter defines the maximum acceptable Peak Cell Rate (PCR) for a Multicast Se… | NWAYSMSS-MIBBandwidthr/w | .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.10 | ||||||
controlDistributeVccTypemandatory Specifies type of traffic characteristicsto be associated with Control Distribute VCC(s). Bandwidth is not reserved for best effort traffic. | NWAYSMSS-MIBAtmVccTrafficTyper/w Type Values:
| .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.11 | ||||||
controlDistributePcrmandatory Specifies the Peak Cell Rate (PCR) Traffic Parameterfor the Control Distribute VCC(s). Since the Control Distribute is a point-to-multipoint VCC, the specified rate applies to the forward direction only. | NWAYSMSS-MIBBandwidthr/w | .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.12 | ||||||
controlDistributeScrmandatory Specifies the Sustained Cell Rate (SCR) TrafficParameter for the Control Distribute VCC(s). Since the Control Distribute is a point-to-multipoint VCC, the specified rate applies to the forward direction only. If the S… | NWAYSMSS-MIBBandwidthr/w | .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.13 | ||||||
multicastForwardVccTypemandatory Specifies type of traffic characteristicsto be associated with Multicast Forward VCC(s). Bandwidth is not reserved for best effort traffic. | NWAYSMSS-MIBAtmVccTrafficTyper/w Type Values:
| .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.14 | ||||||
multicastForwardPcrmandatory Specifies the Peak Cell Rate (PCR) Traffic Parameterfor the Multicast Forward VCC(s). Since the Multicast Multicast Forward is a point-to-multipoint VCC, the specified rate applies to the forward direction only. | NWAYSMSS-MIBBandwidthr/w | .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.15 | ||||||
multicastForwardScrmandatory Specifies the Sustained Cell Rate (SCR) TrafficParameter for the Multicast Forward VCC(s). Since the Multicast Forward is a point-to-multipoint VCC, the specified rate applies to the forward direction only. If the SC… | NWAYSMSS-MIBBandwidthr/w | .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.16 | ||||||
validateJoinsWithLecsmandatory Specifies whether clients that attempt to jointhe ELAN must be validated by the LECS. The default value is taken from the corresponding object in the ELAN MIB, and it overrides the ELAN value. | SNMPv2-TC-v1TruthValuer/w Type Values:
| .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.17 | ||||||
redundancyEnabledmandatory Redundancy support allows clients to be assigned toa backup LES/BUS in the event that the primary LES/BUS for the ELAN fails. | SNMPv2-TC-v1TruthValuer/w Type Values:
| .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.18 | ||||||
redundancyRolemandatory Redundancy Protocol Role. Specifies whether this LES/BUS instanceis to serve as the primary or backup LES/BUS for the ELAN. This object is only valid when redundancyEnabled is true. If this object is never set and red… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.19 | ||||||
redundancyAtmAddrmandatory ATM Address of Backup LES/BUS. Specifies the ATM address of thebackup LES/BUS for the ELAN. Currently, only the private address formats defined by the ATM Forum are supported, there are three private ATM address forma… | r/w | .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.20 | ||||||
bmonEnabledmandatory Enable BUS Monitor for ELAN. When TRUE, host usage of theBroadcast and Unknown Server is monitored. Periodic sampling is performed to provide information on the top N heaviest users of the BUS. Here, a user is defin… | SNMPv2-TC-v1TruthValuer/w Type Values:
| .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.21 | ||||||
numTopMacsmandatory Number of Top MAC Addresses to Record. Specifies the numberof MACs to be recorded with the highest quantity of sampled frames sent to the BUS in a sample interval. | Integer32r/w Constraints: range: 1-100 | .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.22 | ||||||
sampleDurationmandatory Number of seconds in each Sample Interval. Specifies the numberof seconds in each BUS Monitor sample interval. | Integer32r/w Constraints: range: 1-600 | .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.23 | ||||||
interSampleTimemandatory Minutes between start of one sample and the next sample.Specifies the number of minutes between the start of one BUS Monitor sample interval and the start of the next sample interval. | Integer32r/w Constraints: range: 1-120 | .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.24 | ||||||
sampleRatemandatory Specifies the rate at which the BUS Monitor samplesframes sent to the BUS during a sample interval. A value of 1 indicates that every frame sent to the BUS is sampled. A value of 100 indicates that 1 out of every 100 … | Integer32r/w Constraints: range: 1-1000 | .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.25 | ||||||
busModemandatory With the Fast Bus Feature the BUS can run now run in one ofthree modes: systemBusMode(1) - Frames from BUS are buffered into system memory. All intelligent BUS mode are available in th… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.26 |
.1.3.6.1.4.1.2.6.118.1.2.1.1.2.1
·
1 row entry
·
3 columns
Uses the ibm variant from
Command help
/opt/observium/mibs/ibm.
Walk ibmLesBusStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IBM-LES-BUS-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IBM-LES-BUS-MIB::ibmLesBusStatTable'
This table contains all counters ???.
Each entry in this table contains a LES and its counters.
Indexes
lesConfIndex
| Column | Syntax | OID |
|---|---|---|
redundancyVccRefusedmandatory Number of Redundancy VCC call setup requestsrejected by the LES for any reason. | .1.3.6.1.4.1.2.6.118.1.2.1.1.2.1.1.1 | |
redundancyVccReleasedmandatory Number of times a Redundancy VCC has beenreleased by LEC/network for any reason. | .1.3.6.1.4.1.2.6.118.1.2.1.1.2.1.1.2 | |
redundancyVccFailuremandatory Number of Redundancy VCC requests made by LES that failed. | .1.3.6.1.4.1.2.6.118.1.2.1.1.2.1.1.3 |
.1.3.6.1.4.1.2.6.118.1.2.1.1.3.1
·
1 row entry
·
6 columns
Uses the ibm variant from
Command help
/opt/observium/mibs/ibm.
Walk bmonSampleInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IBM-LES-BUS-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IBM-LES-BUS-MIB::bmonSampleInfoTable'
This table contains the BUS Monitor (BMON) information for the last complete sample processed. The following information is maintained for each BUS instance using BMON: - Time that the last complete sample interval started. - Duration of the sample interval. - Number of top hosts actually recorded in the sample. - Number of frames received during the sample interval. - Number of frames sampled in the sample interval. - Frame sampling rate (i.e., 1 out of N frames sampled). Each BUS instance may have a BMON. This table is indexed by lesConfIndex.
Each entry in this table contains BMON information for the
last complete sample processed for a specific BUS instance.
last complete sample processed for a specific BUS instance.
Indexes
lesConfIndex
| Column | Syntax | OID |
|---|---|---|
bmonSampleStartTimemandatory Timestamp for the start of the last complete BUS Monitorsample interval. | SNMPv2-TC-v1TimeStamp | .1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1.1 |
bmonSampleDurationmandatory Duration of the last complete sample interval. | .1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1.2 | |
bmonNumTopMacsmandatory The number of top hosts actually recorded during thelast complete sample interval. | .1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1.3 | |
bmonReceivedFramesmandatory The total number of frames received during the lastcomplete sample interval. | .1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1.4 | |
bmonSampledFramesmandatory The number of frames actually sampled during the lastcomplete sample interval. | .1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1.5 | |
bmonSamplingRatemandatory The frame sampling rate given as N where the rateis 1 out of every N frames will be sampled. | .1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1.6 |
.1.3.6.1.4.1.2.6.118.1.2.1.1.3.2
·
1 row entry
·
4 columns
Uses the ibm variant from
Command help
/opt/observium/mibs/ibm.
Walk bmonStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IBM-LES-BUS-MIB' -M '/opt/observium/mibs/ibm:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IBM-LES-BUS-MIB::bmonStatTable'
This table contains the BUS Monitor (BMON) counters for the top N heaviest users of a BUS (i.e., the N MAC addresses that originate the most data frames. Each BUS instance may have a BMON. This table augments the bmonConfTable.
Each entry in this table contains BMON statistics for the top
users of the indicated BUS instance.
users of the indicated BUS instance.
Indexes
lesConfIndex bmonTopNRank
| Column | Syntax | OID |
|---|---|---|
bmonTopNRankmandatory Rank for the indicated host (i.e., MAC address) givenas N where 1 is the host originating the most frames. | .1.3.6.1.4.1.2.6.118.1.2.1.1.3.2.1.1 | |
bmonTopNSrcMacAddrmandatory Source MAC Address for this host. | SNMPv2-TC-v1MacAddress Type Constraints: range: 6 | .1.3.6.1.4.1.2.6.118.1.2.1.1.3.2.1.2 |
bmonTopNLecAtmAddrmandatory Associated LEC ATM Address for this host. | .1.3.6.1.4.1.2.6.118.1.2.1.1.3.2.1.3 | |
bmonTopNFramesSampledmandatory Number of frames sampled from this host during lastcomplete sample interval. | .1.3.6.1.4.1.2.6.118.1.2.1.1.3.2.1.4 |