IBM-6611-APPN-MIB Table View

The Port table describes the configuration and current
status of the ports used by APPN.  The type of DLC is
included in this table as a pointer to the DLC port
specific tables.

ibmappnNodePortEntry row .1.3.6.1.4.1.2.6.2.13.1.4.1.1

The Port Name is used as the index to this table.

Indexes

No indexes recorded

Column	Syntax	OID
ibmappnNodePortNamemandatory Administratively-assigned name for this APPN port. The name can be from one to eight characters.	OctetString	.1.3.6.1.4.1.2.6.2.13.1.4.1.1.1
ibmappnNodePortStatemandatory Indicates the current state of this port.	Enumerationr/w	.1.3.6.1.4.1.2.6.2.13.1.4.1.1.2
ibmappnNodePortDlcTypemandatory The type of DLC interface, distinguished according to the protocol immediately 'below' this layer.	Enumeration	.1.3.6.1.4.1.2.6.2.13.1.4.1.1.3
ibmappnNodePortPortTypemandatory Identifies the type of line used by this port.	Enumeration	.1.3.6.1.4.1.2.6.2.13.1.4.1.1.4
ibmappnNodePortSIMRIMmandatory Indicates whether Set Initialization Mode (SIM) and Receive Initialization Mode (RIM) are supported.	Enumeration	.1.3.6.1.4.1.2.6.2.13.1.4.1.1.5
ibmappnNodePortLsRolemandatory Initial role for LSs activated through this port, where 'abm' indicates asynchronous balance mode.	Enumeration	.1.3.6.1.4.1.2.6.2.13.1.4.1.1.6
ibmappnNodePortMaxRcvBtuSizemandatory Maximum Basic Transmission Size (BTU) that a link station on this port can receive.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.13.1.4.1.1.7
ibmappnNodePortMaxIframeWindowmandatory Maximum number of I-frames that can be received by the XID sender before an acknowledgement is received.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.13.1.4.1.1.8
ibmappnNodePortDefLsGoodXidsmandatory The total number of successfull XIDs that have occurred on all defined link stations on this port since the last time this port was started.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.13.1.4.1.1.9
ibmappnNodePortDefLsBadXidsmandatory The total number of unsuccessfull XIDs that have occurred on all defined link stations on this port since the last time this port was started.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.13.1.4.1.1.10
ibmappnNodePortDynLsGoodXidsmandatory The total number of successfull XIDs that have occurred on all dynamic link stations on this port since the last time this port was started.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.13.1.4.1.1.11
ibmappnNodePortDynLsBadXidsmandatory The total number of unsuccessfull XIDs that have occurred on all dynamic link stations on this port since the last time this port was started.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.13.1.4.1.1.12
ibmappnNodePortSpecificmandatory Identifies the port specific OBJECT IDENTIFIER that can provide additional information.	ObjectIdentifier	.1.3.6.1.4.1.2.6.2.13.1.4.1.1.13

Port table (TCP/IP specific).

ibmappnNodePortIpEntry row .1.3.6.1.4.1.2.6.2.13.1.4.2.1

The IP Name is used as the index to this table.

Indexes

No indexes recorded

Column	Syntax	OID
ibmappnNodePortIpNamemandatory Administratively-assigned name for this APPN port. The name can be from one to eight characters.	OctetString	.1.3.6.1.4.1.2.6.2.13.1.4.2.1.1
ibmappnNodePortIpPortNummandatory Local TCP/IP port number.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.13.1.4.2.1.2

Port table (DLS specific).

ibmappnNodePortDlsEntry row .1.3.6.1.4.1.2.6.2.13.1.4.3.1

The DLS Name is used as the index to this table.

Indexes

No indexes recorded

Column	Syntax	OID
ibmappnNodePortDlsNamemandatory Administratively-assigned name for this APPN DLS port. The name can be from one to eight characters.	OctetString	.1.3.6.1.4.1.2.6.2.13.1.4.3.1.1
ibmappnNodePortDlsMacmandatory Local DLS MAC address.	OctetString	.1.3.6.1.4.1.2.6.2.13.1.4.3.1.2
ibmappnNodePortDlsSapmandatory Local DLS Sap address.	OctetString	.1.3.6.1.4.1.2.6.2.13.1.4.3.1.3

Port table (Token Ring specific).

ibmappnNodePortTrEntry row .1.3.6.1.4.1.2.6.2.13.1.4.4.1

The TR Name is used as the index to this table.

Indexes

No indexes recorded

Column	Syntax	OID
ibmappnNodePortTrNamemandatory Administratively-assigned name for this APPN port. The name can be from one to eight characters.	OctetString	.1.3.6.1.4.1.2.6.2.13.1.4.4.1.1
ibmappnNodePortTrMacmandatory Local Token Ring MAC address.	OctetString	.1.3.6.1.4.1.2.6.2.13.1.4.4.1.2
ibmappnNodePortTrSapmandatory Local Token Ring Sap address.	OctetString	.1.3.6.1.4.1.2.6.2.13.1.4.4.1.3

Port table generic DLC trace table.

ibmappnNodePortDlcTraceEntry row .1.3.6.1.4.1.2.6.2.13.1.4.5.1

The Port name and a dynamic integer are the index to
this table.

Indexes

No indexes recorded

Column	Syntax	OID
ibmappnNodePortDlcTracPortNamemandatory The Port name associated with this this trace table entry.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2.6.2.13.1.4.5.1.1
ibmappnNodePortDlcTracIndexmandatory This index value is updated every time a new trace entry is created which provides a means to retrieve only the updated entries and also provides a simple method of correlating the entries. The table will wrap when the…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.13.1.4.5.1.2
ibmappnNodePortDlcTracDlcTypemandatory The type of DLC interface, distinguished according to the protocol immediately 'below' this layer.	Enumeration	.1.3.6.1.4.1.2.6.2.13.1.4.5.1.3
ibmappnNodePortDlcTracLocalAddrmandatory Local address in format described below: other = free form DisplayString ip = ld. ld. ld. ld / 2d tr = lx: lx: lx: lx: lx: lx . lx dlsw = lx: lx: lx: lx: lx: lx . lx ethernet = lx: lx: …	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2.6.2.13.1.4.5.1.4
ibmappnNodePortDlcTracRemoteAddrmandatory Remote Address in the format described below: other = free form DisplayString ip = ld. ld. ld. ld / 2d tr = lx: lx: lx: lx: lx: lx . lx dlsw = lx: lx: lx: lx: lx: lx . lx ethernet = lx:…	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2.6.2.13.1.4.5.1.5
ibmappnNodePortDlcTracMsgTypemandatory Indicates the type of trace record entry	Enumeration	.1.3.6.1.4.1.2.6.2.13.1.4.5.1.6
ibmappnNodePortDlcTracCmdTypemandatory Indicates the command type of the trace entry.	Enumeration	.1.3.6.1.4.1.2.6.2.13.1.4.5.1.7
ibmappnNodePortDlcTracUseWanmandatory Indicates the type of connection of the trace entry. For example, token ring and ethernet ports will have useLan as connection. For the dls port, it could be either useWan if connection is across Wan via dls sessions, …	Enumeration	.1.3.6.1.4.1.2.6.2.13.1.4.5.1.8

This table contains detail information about the
link station configuration and current status.

ibmappnNodeLsEntry row .1.3.6.1.4.1.2.6.2.13.1.5.1.1

This table is indexed by the link station name.

Indexes

No indexes recorded

Column	Syntax	OID
ibmappnNodeLsNamemandatory Administratively-assigned name for the link station. The name can be from one to eight characters.	OctetString	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.1
ibmappnNodeLsPortNamemandatory Administratively-assigned name for the port. The name can be from one to eight characters.	OctetString	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.2
ibmappnNodeLsDlcTypemandatory The type of DLC interface, distinguished according to the protocol immediately 'below' this layer.	Enumeration	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.3
ibmappnNodeLsDynamicmandatory Identifies whether this resource is a dynamic link station. Dynamic link stations are created when adjacent nodes that have not been locally defined establish a connection with this node.	Enumeration	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.4
ibmappnNodeLsStatemandatory State of this link station.	Enumerationr/w	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.5
ibmappnNodeLsCpNamemandatory Fully-qualified name of the adjacent node for this link station. The name can be from three to seventeen characters. Format is netid.cpname.	OctetString	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.6
ibmappnNodeLsTgNummandatory Number associated with the TG to this link station.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.7
ibmappnNodeLsLimResourcemandatory Indicates whether the link station is a limited resource. If it is, the TG is deactivated when there are no sessions.	Enumeration	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.8
ibmappnNodeLsMigrationmandatory Indicates whether this link station will be used for connections to down-level or migration partners.	Enumeration	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.9
ibmappnNodeLsBlockNummandatory The block number is the first three digits of the node_id. These 3 hexideimal digits identify the product and are not configurable.	OctetString	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.10
ibmappnNodeLsIdNummandatory The ID number is the last 5 digits of the node_id. These 5 hexadecimal digits are administratively defined and combined with the 3 digit block number form the node_id. This node_id is used to identify the local node and…	OctetString	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.11
ibmappnNodeLsCpCpSessionmandatory Indicates whether CP-CP sessions are supported by this link station.	Enumeration	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.12
ibmappnNodeLsTargetPacingCountmandatory Numeric value between 0 and 32767 inclusive indicating the desired pacing window size for BINDs on this TG. The number is significant only when fixed bind pacing is being performed.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.13
ibmappnNodeLsMaxSendBtuSizemandatory Numeric value between 0 and 32767 inclusive indicating the desired number of bytes in a Basic Transmission Unit (BTU) that can be sent on this TG. This is an administratively assigned value.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.14
ibmappnNodeLsEffCapmandatory The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 603,979,776. This is an administratively assigne…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.15
ibmappnNodeLsConnCostmandatory Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates maximum cost. This is an administratively assigned value associ…	Integer32	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.16
ibmappnNodeLsByteCostmandatory Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with the TG using this link station.	Integer32	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.17
ibmappnNodeLsSecuritymandatory The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assigned value associated with the TG using this link station.	Enumeration	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.18
ibmappnNodeLsDelaymandatory Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with some of the more common values enumerated. This is an administ…	Enumeration	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.19
ibmappnNodeLsUsr1mandatory First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link station.	Integer32	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.20
ibmappnNodeLsUsr2mandatory Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link station.	Integer32	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.21
ibmappnNodeLsUsr3mandatory Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link station.	Integer32	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.22
ibmappnNodeLsInXidBytesmandatory Number of XID bytes received.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.23
ibmappnNodeLsInMsgBytesmandatory Number of message (I-frame) bytes received.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.24
ibmappnNodeLsInXidFramesmandatory Number of XID frames received.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.25
ibmappnNodeLsInMsgFramesmandatory Number of message (I-frame) frames received.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.26
ibmappnNodeLsOutXidBytesmandatory Number of XID bytes sent.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.27
ibmappnNodeLsOutMsgBytesmandatory Number of message (I-frame) bytes sent.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.28
ibmappnNodeLsOutXidFramesmandatory Number of XID frames sent.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.29
ibmappnNodeLsOutMsgFramesmandatory Number of message (I-frame) frames sent.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.30
ibmappnNodeLsEchoRspsmandatory Number of responses returned from adjacent link station. A response should be returned for each test frame sent by this node. Test frames are sent to adjacent nodes periodically to verify connectivity and to measure tha…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.31
ibmappnNodeLsCurrentDelaymandatory The time that it took for the last test signal to be sent and returned from this link station to the adjacent links station. This time is represented in milliseconds.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.32
ibmappnNodeLsMaxDelaymandatory The longest time it took for a test signal to be sent and returned from this link station to the adjacent links station. This time is represented in milliseconds .	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.33
ibmappnNodeLsMinDelaymandatory The shortest time it took for a test signal to be sent and returned from this link station to the adjacent links station. This time is represented in milliseconds.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.34
ibmappnNodeLsMaxDelayTimemandatory The time (since system up in hundredth of seconds) when the longest delay occurred. This time can be used to identify when this high water mark occurred in relation to the last initialization of the APPN node.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.35
ibmappnNodeLsGoodXidsmandatory The total number of successful XIDs that have occurred on this link station since the time it was started.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.36
ibmappnNodeLsBadXidsmandatory The total number of unsuccessful XIDs that have occurred on this link station since the time it was started.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.37
ibmappnNodeLsSpecificmandatory Identifies the DLC specific OBJECT IDENTIFIER that can provide additional information.	ObjectIdentifier	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.38
ibmappnNodeLsSubStatemandatory State of this link station.	Enumeration	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.39
ibmappnNodeLsStartTimemandatory The time (in hundredth of seconds) this link station has been active the last time since the time APPN was initialized.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.40
ibmappnNodeLsActiveTimemandatory The time (in hundredth of seconds) this link station has been in the active state. A zero value indicates the link station has never been active.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.41
ibmappnNodeLsCurrentStateTimemandatory The time (in hundredth of seconds) the link station is in the current state.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.13.1.5.1.1.42

Link station table (TCP/IP specific).

ibmappnNodeLsIpEntry row .1.3.6.1.4.1.2.6.2.13.1.5.2.1

The IP Name is used as the index to this table.

Indexes

No indexes recorded

Column	Syntax	OID
ibmappnNodeLsIpNamemandatory Administratively-assigned name for this link station. The name can be from one to eight characters.	OctetString	.1.3.6.1.4.1.2.6.2.13.1.5.2.1.1
ibmappnNodeLsIpStatemandatory State of this link station.	Enumeration	.1.3.6.1.4.1.2.6.2.13.1.5.2.1.2
ibmappnNodeLsLocalIpAddrmandatory Local IP address.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2.6.2.13.1.5.2.1.3
ibmappnNodeLsLocalIpPortNummandatory Local TCP/IP port number. The default listening port will be administratively assigned and will dynamically change if this node initiates a session with adjacent node.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.13.1.5.2.1.4
ibmappnNodeLsRemoteIpAddrmandatory Remote IP address.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2.6.2.13.1.5.2.1.5
ibmappnNodeLsRemoteIpPortNummandatory Remote TCP/IP port number.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.13.1.5.2.1.6

Ls Table (DLS specific).

ibmappnNodeLsDlsEntry row .1.3.6.1.4.1.2.6.2.13.1.5.3.1

The DLS Name is used as the index to this table.

Indexes

No indexes recorded

Column	Syntax	OID
ibmappnNodeLsDlsNamemandatory Administratively-assigned name for this link station. The name can be from one to eight characters.	OctetString	.1.3.6.1.4.1.2.6.2.13.1.5.3.1.1
ibmappnNodeLsDlsStatemandatory State of this link station.	Enumeration	.1.3.6.1.4.1.2.6.2.13.1.5.3.1.2
ibmappnNodeLsLocalDlsMacmandatory Local MAC address.	OctetString	.1.3.6.1.4.1.2.6.2.13.1.5.3.1.3
ibmappnNodeLsLocalDlsSapmandatory Local SAP address.	OctetString	.1.3.6.1.4.1.2.6.2.13.1.5.3.1.4
ibmappnNodeLsRemoteDlsMacmandatory Remote MAC address.	OctetString	.1.3.6.1.4.1.2.6.2.13.1.5.3.1.5
ibmappnNodeLsRemoteDlsSapmandatory Remote SAP address.	OctetString	.1.3.6.1.4.1.2.6.2.13.1.5.3.1.6

Ls Table (Token Ring specific).

ibmappnNodeLsTrEntry row .1.3.6.1.4.1.2.6.2.13.1.5.4.1

The TR Name is used as the index to this table.

Indexes

No indexes recorded

Column	Syntax	OID
ibmappnNodeLsTrNamemandatory Administratively-assigned name for this link station. The name can be from one to eight characters.	OctetString	.1.3.6.1.4.1.2.6.2.13.1.5.4.1.1
ibmappnNodeLsTrStatemandatory State of this link station.	Enumeration	.1.3.6.1.4.1.2.6.2.13.1.5.4.1.2
ibmappnNodeLsLocalTrMacmandatory Local MAC address.	OctetString	.1.3.6.1.4.1.2.6.2.13.1.5.4.1.3
ibmappnNodeLsLocalTrSapmandatory Local SAP address.	OctetString	.1.3.6.1.4.1.2.6.2.13.1.5.4.1.4
ibmappnNodeLsRemoteTrMacmandatory Remote MAC address.	OctetString	.1.3.6.1.4.1.2.6.2.13.1.5.4.1.5
ibmappnNodeLsRemoteTrSapmandatory Remote SAP address.	OctetString	.1.3.6.1.4.1.2.6.2.13.1.5.4.1.6

This table contains information related to exceptional
and potential exceptional conditions that occur during
the activation, XID exchange, and termination of the
connection.

ibmappnNodeLsStatusEntry row .1.3.6.1.4.1.2.6.2.13.1.5.5.1

This table is indexed by the LsStatusIndex, which is an
integer that is continuously updated until it eventually
wraps. This provides the management station the ability
to retrieve only the updates to the table by usin…

Indexes

No indexes recorded

Column	Syntax	OID
ibmappnNodeLsStatusIndexmandatory This index is continuous index this table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.13.1.5.5.1.1
ibmappnNodeLsStatusTimemandatory Time (in hundreds of a second) since this node was last initialized.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.13.1.5.5.1.2
ibmappnNodeLsStatusLsNamemandatory Administratively-assigned name for this link station.	OctetString	.1.3.6.1.4.1.2.6.2.13.1.5.5.1.3
ibmappnNodeLsStatusCpNamemandatory Administratively-assigned fully-qualified name of the adjacent node partner. This will be provided when the adjacent node has been defined at this node or when the XID sequence has proceeded far enough to to identify t…	OctetString	.1.3.6.1.4.1.2.6.2.13.1.5.5.1.4
ibmappnNodeLsStatusNodeIdmandatory Adjacent Node id	OctetString	.1.3.6.1.4.1.2.6.2.13.1.5.5.1.5
ibmappnNodeLsStatusTgNummandatory Number associated with the TG to this link station with a range from 0 to 256. A value of 256 indicates the tg number has not been negotiated and is unknown at this time.	Integer32	.1.3.6.1.4.1.2.6.2.13.1.5.5.1.6
ibmappnNodeLsStatusGeneralSensemandatory The error sense code associated with the start sequence of activation of a link up to the beginning of the XID sequence.	OctetString	.1.3.6.1.4.1.2.6.2.13.1.5.5.1.7
ibmappnNodeLsStatusNofRetrymandatory Indicates whether Node Operator Facility will retry the start request to activate the link.	Enumeration	.1.3.6.1.4.1.2.6.2.13.1.5.5.1.8
ibmappnNodeLsStatusEndSensemandatory The sense code associated with the termination of the link connection to adjacent node. This includes all sense information included in the disconnect recieved from the lower layer DLCs and also sense information indic…	OctetString	.1.3.6.1.4.1.2.6.2.13.1.5.5.1.9
ibmappnNodeLsStatusXidLocalSensemandatory The error sense code associated with the rejection of the XID.	OctetString	.1.3.6.1.4.1.2.6.2.13.1.5.5.1.10
ibmappnNodeLsStatusXidRemoteSensemandatory The error sense code adjacent node returned to this node indicating the reason the XID was rejected.	OctetString	.1.3.6.1.4.1.2.6.2.13.1.5.5.1.11
ibmappnNodeLsStatusXidByteInErrormandatory This identifies the actual byte in the XID that caused the error. The value of zero (0) indicates that the variable has no meaning.	Enumeration	.1.3.6.1.4.1.2.6.2.13.1.5.5.1.12
ibmappnNodeLsStatusXidBitInErrormandatory This identifies the actual bit within the error byte of the XID. This only has meaning when the byte in error is greater than zero.	Enumeration	.1.3.6.1.4.1.2.6.2.13.1.5.5.1.13
ibmappnNodeLsStatusDlcTypemandatory This identifies DLC type that was being used when error occurred. This also is used to the format of the local and remote address provided. other = free form DisplayString ip = ld…	Enumeration	.1.3.6.1.4.1.2.6.2.13.1.5.5.1.14
ibmappnNodeLsStatusLocalAddrmandatory This contains a displayable string that identifies the DLC type and appropriate address. See DlcType above for details of the format.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2.6.2.13.1.5.5.1.15
ibmappnNodeLsStatusRemoteAddrmandatory This contains a displayable string that identifies the DLC type and appropriate address. See DlcType above for details of the format.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2.6.2.13.1.5.5.1.16

Table containing an entry for every Class of Service
that it has calculated a route for.

ibmappnNnTopoRouteEntry row .1.3.6.1.4.1.2.6.2.13.2.1.23.1

The Class of Service name is the index for this table.

Indexes

No indexes recorded

Column	Syntax	OID
ibmappnNnTopoRouteCosmandatory The Class of Service for the route.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2.6.2.13.2.1.23.1.1
ibmappnNnTopoRouteTreesmandatory Number of routes tree caches built for this Class of Service since the last initialization.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.13.2.1.23.1.2
ibmappnNnTopoRouteCalcsmandatory Number of routes calculated since last initialization.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.13.2.1.23.1.3
ibmappnNnTopoRouteRejsmandatory Number of route requests that could not be calculated since last initialization.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.13.2.1.23.1.4

Table containing an entry for every node.  The information
kept in this table is the last FRSN sent and received,
the status of the CP-CP sessions, and a gauge that
indicates the number of outstanding TDUs.

ibmappnNnAdjNodeEntry row .1.3.6.1.4.1.2.6.2.13.2.2.1

The adjacent node name is the index for this table.

Indexes

No indexes recorded

Column	Syntax	OID
ibmappnNnAdjNodeAdjNamemandatory An administratively-assigned fully-qualified name of this node's adjacent network node.	OctetString	.1.3.6.1.4.1.2.6.2.13.2.2.1.1
ibmappnNnAdjNodeCpCpSessStatusmandatory Indicates the state of CP-CP sessions between this node and adjacent network and end nodes. Incative indicates no CP-CP sessions exists between this node and the adjacent node. Active indicates CP-CP sessons are activ…	Enumeration	.1.3.6.1.4.1.2.6.2.13.2.2.1.2
ibmappnNnAdjNodeOutOfSeqTdusmandatory Number of out of sequence Topology Database Updates (TDUs). In a quiesced state, this value is zero. In normal operation, the value varies depending on the network environment.	RFC1155-SMIGauge Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2.6.2.13.2.2.1.3
ibmappnNnAdjNodeLastFrsnSentmandatory Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates …	Integer32	.1.3.6.1.4.1.2.6.2.13.2.2.1.4
ibmappnNnAdjNodeLastFrsnRcvdmandatory Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates …	Integer32	.1.3.6.1.4.1.2.6.2.13.2.2.1.5

Portion of the APPN routing table
that describes all of the APPN network nodes
and virtual nodes known to this node.

ibmappnNnTopologyEntry row .1.3.6.1.4.1.2.6.2.13.2.3.1.1

The fully-qualified node name is used to
index this table.

Indexes

No indexes recorded

Column	Syntax	OID
ibmappnNnNodeNamemandatory Administratively-assigned network name that is locally defined at each network node in the format NETID.CPNAME.	OctetString	.1.3.6.1.4.1.2.6.2.13.2.3.1.1.1
ibmappnNnNodeFrsnmandatory Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates …	Integer32	.1.3.6.1.4.1.2.6.2.13.2.3.1.1.2
ibmappnNnNodeEntryTimeLeftmandatory Number of days before deletion of this network node entry. Range is 0-31.	Integer32	.1.3.6.1.4.1.2.6.2.13.2.3.1.1.3
ibmappnNnNodeTypemandatory Type of APPN node.	Enumeration	.1.3.6.1.4.1.2.6.2.13.2.3.1.1.4
ibmappnNnNodeRsnmandatory Resource sequence number that is assigned and controlled by the network node that owns this resource. This is always an even 32-bit number unless an error has occurred.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.13.2.3.1.1.5
ibmappnNnNodeRouteAddResistmandatory Route addition resistance indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, is used in route computation. The lower the value, the more …	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.13.2.3.1.1.6
ibmappnNnNodeCongestedmandatory Indicates whether this node is congested. This node is not be included in route selection by other nodes when this congestion exists.	Enumeration	.1.3.6.1.4.1.2.6.2.13.2.3.1.1.7
ibmappnNnNodeIsrDepletedmandatory Indicates whether intermediate session routing resources are depleted. This node is not included in intermediate route selection by other nodes when resources are depleted.	Enumeration	.1.3.6.1.4.1.2.6.2.13.2.3.1.1.8
ibmappnNnNodeEndptDepletedmandatory Indicates whether session endpoint resources are depleted.	Enumeration	.1.3.6.1.4.1.2.6.2.13.2.3.1.1.9
ibmappnNnNodeQuiescingmandatory Indicates whether the node is quiescing. This node is not included in route selection by other nodes when the node is quiescing.	Enumeration	.1.3.6.1.4.1.2.6.2.13.2.3.1.1.10
ibmappnNnNodeGatewaymandatory Indicates whether the node provide gateway functions.	Enumeration	.1.3.6.1.4.1.2.6.2.13.2.3.1.1.11
ibmappnNnNodeCentralDirectorymandatory Indicates whether the node is central directory.	Enumeration	.1.3.6.1.4.1.2.6.2.13.2.3.1.1.12
ibmappnNnNodeIsrmandatory Indicates whether the node supports intermediate session routing (ISR).	Enumeration	.1.3.6.1.4.1.2.6.2.13.2.3.1.1.13
ibmappnNnNodeChainSupportmandatory Indicates whether the node supports chaining.	Enumeration	.1.3.6.1.4.1.2.6.2.13.2.3.1.1.14

Portion of the APPN topology database
that describes all of the APPN transmissions groups
used by the APPN network nodes.

ibmappnNnTgTopologyEntry row .1.3.6.1.4.1.2.6.2.13.2.3.2.1

This table requires three indexes to provide a
unique index. The indexes are the owning or originating
CPname, the destination CPname, and the TG number.

Indexes

No indexes recorded

Column	Syntax	OID
ibmappnNnTgOwnermandatory Administratively-assigned name for the originating node for this TG. The format is NETID.CPNAME and is the same name specified in the node table.	OctetString	.1.3.6.1.4.1.2.6.2.13.2.3.2.1.1
ibmappnNnTgDestmandatory Administratively-assigned fully-qualified network name for the destination node for this TG.	OctetString	.1.3.6.1.4.1.2.6.2.13.2.3.2.1.2
ibmappnNnTgNummandatory Number associated with this transmission group. Range is 0-255.	Integer32	.1.3.6.1.4.1.2.6.2.13.2.3.2.1.3
ibmappnNnTgFrsnmandatory Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates…	Integer32	.1.3.6.1.4.1.2.6.2.13.2.3.2.1.4
ibmappnNnTgEntryTimeLeftmandatory Number of days before deletion of this network node TG entry. Range is 0-31.	Integer32	.1.3.6.1.4.1.2.6.2.13.2.3.2.1.5
ibmappnNnTgDestVirtualmandatory Indicates whether the destination node is a virtual node.	Enumeration	.1.3.6.1.4.1.2.6.2.13.2.3.2.1.6
ibmappnNnTgDlcDatamandatory DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial digits	OctetString	.1.3.6.1.4.1.2.6.2.13.2.3.2.1.7
ibmappnNnTgRsnmandatory Current owning node's resource sequence number for this resource.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.13.2.3.2.1.8
ibmappnNnTgOperationalmandatory Indicates whether the transmission group is operational.	Enumeration	.1.3.6.1.4.1.2.6.2.13.2.3.2.1.9
ibmappnNnTgQuiescingmandatory Indicates whether the transmission group is quiescing.	Enumeration	.1.3.6.1.4.1.2.6.2.13.2.3.2.1.10
ibmappnNnTgCpCpSessionmandatory Indicates whether CP-CP sessions are supported on this TG.	Enumeration	.1.3.6.1.4.1.2.6.2.13.2.3.2.1.11
ibmappnNnTgEffCapmandatory The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 603,979,776. This is an administratively assigne…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.13.2.3.2.1.12
ibmappnNnTgConnCostmandatory Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates maximum cost. This is an administratively assigned value associ…	Integer32	.1.3.6.1.4.1.2.6.2.13.2.3.2.1.13
ibmappnNnTgByteCostmandatory Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with this TG.	Integer32	.1.3.6.1.4.1.2.6.2.13.2.3.2.1.14
ibmappnNnTgSecuritymandatory The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assigned value associated with this TG.	Enumeration	.1.3.6.1.4.1.2.6.2.13.2.3.2.1.15
ibmappnNnTgDelaymandatory Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with some of the more common values enumerated. This is an administratively assign…	Enumeration	.1.3.6.1.4.1.2.6.2.13.2.3.2.1.16
ibmappnNnTgModemClassmandatory This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector; for a non-connection network it is X'00'.	Integer32	.1.3.6.1.4.1.2.6.2.13.2.3.2.1.17
ibmappnNnTgUsr1mandatory First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG.	Integer32	.1.3.6.1.4.1.2.6.2.13.2.3.2.1.18
ibmappnNnTgUsr2mandatory Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG.	Integer32	.1.3.6.1.4.1.2.6.2.13.2.3.2.1.19
ibmappnNnTgUsr3mandatory Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG.	Integer32	.1.3.6.1.4.1.2.6.2.13.2.3.2.1.20

Portion of the APPN routing table
that describes all of the APPN network nodes
and virtual nodes known to this node.

ibmappnNnTopologyFREntry row .1.3.6.1.4.1.2.6.2.13.2.3.3.1

This table is indexed by two columns:
FRSN, followed by fully-qualified node name.

Indexes

No indexes recorded

Column	Syntax	OID
ibmappnNnNodeFRNamemandatory Administratively-assigned network name that is locally defined at each network node in the format NETID.CPNAME.	OctetString	.1.3.6.1.4.1.2.6.2.13.2.3.3.1.1
ibmappnNnNodeFRFrsnmandatory Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates …	Integer32	.1.3.6.1.4.1.2.6.2.13.2.3.3.1.2
ibmappnNnNodeFREntryTimeLeftmandatory Number of days before deletion of this network node entry. Range is 0-31.	Integer32	.1.3.6.1.4.1.2.6.2.13.2.3.3.1.3
ibmappnNnNodeFRTypemandatory Type of APPN node.	Enumeration	.1.3.6.1.4.1.2.6.2.13.2.3.3.1.4
ibmappnNnNodeFRRsnmandatory Resource sequence number that is assigned and controlled by the network node that owns this resource. This is always an even 32-bit number unless an error has occurred.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.13.2.3.3.1.5
ibmappnNnNodeFRRouteAddResistmandatory Route addition resistance indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, is used in route computation. The lower the value, the more …	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.13.2.3.3.1.6
ibmappnNnNodeFRCongestedmandatory Indicates whether this node is congested. This node is not be included in route selection by other nodes when this congestion exists.	Enumeration	.1.3.6.1.4.1.2.6.2.13.2.3.3.1.7
ibmappnNnNodeFRIsrDepletedmandatory Indicates whether intermediate session routing resources are depleted. This node is not included in intermediate route selection by other nodes when resources are depleted.	Enumeration	.1.3.6.1.4.1.2.6.2.13.2.3.3.1.8
ibmappnNnNodeFREndptDepletedmandatory Indicates whether session endpoint resources are depleted.	Enumeration	.1.3.6.1.4.1.2.6.2.13.2.3.3.1.9
ibmappnNnNodeFRQuiescingmandatory Indicates whether the node is quiescing. This node is not included in route selection by other nodes when the node is quiescing.	Enumeration	.1.3.6.1.4.1.2.6.2.13.2.3.3.1.10
ibmappnNnNodeFRGatewaymandatory Indicates whether the node provide gateway functions.	Enumeration	.1.3.6.1.4.1.2.6.2.13.2.3.3.1.11
ibmappnNnNodeFRCentralDirectorymandatory Indicates whether the node is central directory.	Enumeration	.1.3.6.1.4.1.2.6.2.13.2.3.3.1.12
ibmappnNnNodeFRIsrmandatory Indicates whether the node supports intermediate session routing (ISR).	Enumeration	.1.3.6.1.4.1.2.6.2.13.2.3.3.1.13
ibmappnNnNodeFRChainSupportmandatory Indicates whether the node supports chaining.	Enumeration	.1.3.6.1.4.1.2.6.2.13.2.3.3.1.14

Portion of the APPN topology database
that describes all of the APPN transmissions groups
used by the APPN network nodes.

ibmappnNnTgTopologyFREntry row .1.3.6.1.4.1.2.6.2.13.2.3.4.1

This table is indexed by four columns:
FRSN, TG owner fully-qualified node name,
TG destination fully-qualified node name, and TG number.

Indexes

No indexes recorded

Column	Syntax	OID
ibmappnNnTgFROwnermandatory Administratively-assigned name for the originating node for this TG. The format is NETID.CPNAME and is the same name specified in the node table.	OctetString	.1.3.6.1.4.1.2.6.2.13.2.3.4.1.1
ibmappnNnTgFRDestmandatory Administratively-assigned fully-qualified network name for the destination node for this TG.	OctetString	.1.3.6.1.4.1.2.6.2.13.2.3.4.1.2
ibmappnNnTgFRNummandatory Number associated with this transmission group. Range is 0-255.	Integer32	.1.3.6.1.4.1.2.6.2.13.2.3.4.1.3
ibmappnNnTgFRFrsnmandatory Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates…	Integer32	.1.3.6.1.4.1.2.6.2.13.2.3.4.1.4
ibmappnNnTgFREntryTimeLeftmandatory Number of days before deletion of this network node TG entry. Range is 0-31.	Integer32	.1.3.6.1.4.1.2.6.2.13.2.3.4.1.5
ibmappnNnTgFRDestVirtualmandatory Indicates whether the destination node is a virtual node.	Enumeration	.1.3.6.1.4.1.2.6.2.13.2.3.4.1.6
ibmappnNnTgFRDlcDatamandatory DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial digits	OctetString	.1.3.6.1.4.1.2.6.2.13.2.3.4.1.7
ibmappnNnTgFRRsnmandatory Current owning node's resource sequence number for this resource.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.13.2.3.4.1.8
ibmappnNnTgFROperationalmandatory Indicates whether the transmission group is operational.	Enumeration	.1.3.6.1.4.1.2.6.2.13.2.3.4.1.9
ibmappnNnTgFRQuiescingmandatory Indicates whether the transmission group is quiescing.	Enumeration	.1.3.6.1.4.1.2.6.2.13.2.3.4.1.10
ibmappnNnTgFRCpCpSessionmandatory Indicates whether CP-CP sessions are supported on this TG.	Enumeration	.1.3.6.1.4.1.2.6.2.13.2.3.4.1.11
ibmappnNnTgFREffCapmandatory The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 603,979,776. This is an administratively assigne…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.13.2.3.4.1.12
ibmappnNnTgFRConnCostmandatory Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates maximum cost. This is an administratively assigned value associ…	Integer32	.1.3.6.1.4.1.2.6.2.13.2.3.4.1.13
ibmappnNnTgFRByteCostmandatory Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with this TG.	Integer32	.1.3.6.1.4.1.2.6.2.13.2.3.4.1.14
ibmappnNnTgFRSecuritymandatory The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assigned value associated with this TG.	Enumeration	.1.3.6.1.4.1.2.6.2.13.2.3.4.1.15
ibmappnNnTgFRDelaymandatory Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with some of the more common values enumerated. This is an administratively assign…	Enumeration	.1.3.6.1.4.1.2.6.2.13.2.3.4.1.16
ibmappnNnTgFRModemClassmandatory This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector; for a non-connection network it is X'00'.	Integer32	.1.3.6.1.4.1.2.6.2.13.2.3.4.1.17
ibmappnNnTgFRUsr1mandatory First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG.	Integer32	.1.3.6.1.4.1.2.6.2.13.2.3.4.1.18
ibmappnNnTgFRUsr2mandatory Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG.	Integer32	.1.3.6.1.4.1.2.6.2.13.2.3.4.1.19
ibmappnNnTgFRUsr3mandatory Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG.	Integer32	.1.3.6.1.4.1.2.6.2.13.2.3.4.1.20

TG Table describes all of the TGs owned by this
node.  The TG destination can be a virtual
node, network node, len, or end node.

ibmappnLocalTgEntry row .1.3.6.1.4.1.2.6.2.13.3.1.3.1.1

This table is indexed by the destination CPname
and the TG number.

Indexes

No indexes recorded

Column	Syntax	OID
ibmappnLocalTgDestmandatory Administratively-assigned name for the destination node for this TG. This is the fully-qualified network node name.	OctetString	.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.1
ibmappnLocalTgNummandatory Number associated with this transmission group.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.2
ibmappnLocalTgDestVirtualmandatory Indicates whether the destination node is a Virtual node.	Enumeration	.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.3
ibmappnLocalTgDlcDatamandatory DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial digits	OctetString	.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.4
ibmappnLocalTgRsnmandatory The resource sequence number is assigned and controlled by the network node that owns this resource. This is always an even unsigned number unless an error has occurred.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.5
ibmappnLocalTgQuiescingmandatory Indicates whether the Transmission Group is quiescing.	Enumeration	.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.6
ibmappnLocalTgOperationalmandatory Indicates whether the Transmission Group is operational.	Enumeration	.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.7
ibmappnLocalTgCpCpSessionmandatory Indicates whether the CP-CP Sessions are supported on this TG.	Enumeration	.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.8
ibmappnLocalTgEffCapmandatory The effective capacity is an integer value that indicates the actual kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 603,979,776.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.9
ibmappnLocalTgConnCostmandatory Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255.	Integer32	.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.10
ibmappnLocalTgByteCostmandatory Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255.	Integer32	.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.11
ibmappnLocalTgSecuritymandatory Security level for this TG.	Enumeration	.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.12
ibmappnLocalTgDelaymandatory Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with some of the more common values enumerated.	Enumeration	.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.13
ibmappnLocalTgModemClassmandatory This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector and for a non-connection network it is zero.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.14
ibmappnLocalTgUsr1mandatory Value of the first user-defined TG characteristic for this TG. Range is 0-255.	Integer32	.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.15
ibmappnLocalTgUsr2mandatory Value of the second user-defined TG characteristic for this TG. Range is 0-255.	Integer32	.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.16
ibmappnLocalTgUsr3mandatory Value of the third user-defined TG characteristic for this TG. Range is 0-255.	Integer32	.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.17

Portion of the APPN topology
database that describes the end
nodes known to this node.

ibmappnLocalEnEntry row .1.3.6.1.4.1.2.6.2.13.3.2.1.1

This table is indexed by the end node CPname.

Indexes

No indexes recorded

Column	Syntax	OID
ibmappnLocalEnNamemandatory Administratively-assigned fully-qualified name of end node in the format NETID.CPNAME.	OctetString	.1.3.6.1.4.1.2.6.2.13.3.2.1.1.1
ibmappnLocalEnEntryTimeLeftmandatory Number of days before deletion of this end node entry. Range is 0-31.	Integer32	.1.3.6.1.4.1.2.6.2.13.3.2.1.1.2
ibmappnLocalEnTypemandatory Type of APPN node (must always be a len or end node).	Enumeration	.1.3.6.1.4.1.2.6.2.13.3.2.1.1.3

Table describing all of the TGs owned by the
end nodes known to this node.
The TG destination can be a virtual
node, network node, or end node.

ibmappnLocalEnTgEntry row .1.3.6.1.4.1.2.6.2.13.3.2.2.1

This table requires multiple indexes to uniquely
identify each TG. They are originating CPname,
destination CPname, and the TG number.

Indexes

No indexes recorded

Column	Syntax	OID
ibmappnLocalEnTgOriginmandatory Administratively-assigned name for the origination node for this TG. This is the fully-qualified network name.	OctetString	.1.3.6.1.4.1.2.6.2.13.3.2.2.1.1
ibmappnLocalEnTgDestmandatory Administratively-assigned name for the destination node for this TG. This is the fully-qualified network name.	OctetString	.1.3.6.1.4.1.2.6.2.13.3.2.2.1.2
ibmappnLocalEnTgNummandatory Number associated with this transmission group.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.13.3.2.2.1.3
ibmappnLocalEnTgEntryTimeLeftmandatory Number of days before deletion of this end node TG entry. Range is 0-31.	Integer32	.1.3.6.1.4.1.2.6.2.13.3.2.2.1.4
ibmappnLocalEnTgDestVirtualmandatory Indicates whether the destination node is a virtual node.	Enumeration	.1.3.6.1.4.1.2.6.2.13.3.2.2.1.5
ibmappnLocalEnTgDlcDatamandatory DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial digits	OctetString	.1.3.6.1.4.1.2.6.2.13.3.2.2.1.6
ibmappnLocalEnTgOperationalmandatory Indicates whether the Transmission Group is operational.	Enumeration	.1.3.6.1.4.1.2.6.2.13.3.2.2.1.7
ibmappnLocalEnTgCpCpSessionmandatory Indicates whether CP-CP sessions are supported on this TG.	Enumeration	.1.3.6.1.4.1.2.6.2.13.3.2.2.1.8
ibmappnLocalEnTgEffCapmandatory The effective capacity is an integer value that indicates the actual kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 603,979,776.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.13.3.2.2.1.9
ibmappnLocalEnTgConnCostmandatory Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255.	Integer32	.1.3.6.1.4.1.2.6.2.13.3.2.2.1.10
ibmappnLocalEnTgByteCostmandatory Relative cost of transmitting a byte over this link. Range is from 0, which means no cost, to 255.	Integer32	.1.3.6.1.4.1.2.6.2.13.3.2.2.1.11
ibmappnLocalEnTgSecuritymandatory Security level for this TG.	Enumeration	.1.3.6.1.4.1.2.6.2.13.3.2.2.1.12
ibmappnLocalEnTgDelaymandatory Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with some of the more common values enumerated.	Enumeration	.1.3.6.1.4.1.2.6.2.13.3.2.2.1.13
ibmappnLocalEnTgModemClassmandatory This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector and for a non connection network it is zero.	Integer32	.1.3.6.1.4.1.2.6.2.13.3.2.2.1.14
ibmappnLocalEnTgUsr1mandatory First user-defined TG characteristic for this TG. Range of values is 0-255.	Integer32	.1.3.6.1.4.1.2.6.2.13.3.2.2.1.15
ibmappnLocalEnTgUsr2mandatory Second user-defined TG characteristic for this TG. Range of values is 0-255.	Integer32	.1.3.6.1.4.1.2.6.2.13.3.2.2.1.16
ibmappnLocalEnTgUsr3mandatory Third user-defined TG characteristic for this TG. Range of values is 0-255.	Integer32	.1.3.6.1.4.1.2.6.2.13.3.2.2.1.17

Table containing information about
all known LUs and TPs.

ibmappnDirEntry row .1.3.6.1.4.1.2.6.2.13.5.2.1

This table is indexed by the LU name.

Indexes

No indexes recorded

Column	Syntax	OID
ibmappnDirLuNamemandatory Fully-qualified network LU name in the domain of the serving network node.	OctetString	.1.3.6.1.4.1.2.6.2.13.5.2.1.1
ibmappnDirServerNamemandatory Fully-qualified control point (CP) name of the network node server. For unassociated end node entries, the end node fully-qualified name is returned.	OctetString	.1.3.6.1.4.1.2.6.2.13.5.2.1.2
ibmappnDirLuOwnerNamemandatory Fully-qualified CP name of the node at which the LU is located. This name is the same as the serving NN name when the LU is located at a network node or an unassociated end node. It is also the same as the fully-quali…	OctetString	.1.3.6.1.4.1.2.6.2.13.5.2.1.3
ibmappnDirLuLocationmandatory Specifies the location of the LU.	Enumeration	.1.3.6.1.4.1.2.6.2.13.5.2.1.4
ibmappnDirTypemandatory Directory types are: 1 - Home The LU is in the domain of the local network node and the LU information has been configured at the local node. 2 - Cache The LU has previously been l…	Enumeration	.1.3.6.1.4.1.2.6.2.13.5.2.1.5
ibmappnDirWildCardmandatory 1 - Other means unknown type of LU entry. 2 - Expliced-entry means the full LUNAME will be used for locating this LU. 3 - Partial-wildcard means only the non-blank portions of the LUNAME will be used for locatin…	Enumeration	.1.3.6.1.4.1.2.6.2.13.5.2.1.6

Table representing all of the defined
mode names for this node.  The table
contains the matching COS name.

ibmappnCosModeEntry row .1.3.6.1.4.1.2.6.2.13.6.1.1

This table is indexed by the Mode Name.

Indexes

No indexes recorded

Column	Syntax	OID
ibmappnCosModeNamemandatory Administratively-assigned name for this mode entry.	OctetString	.1.3.6.1.4.1.2.6.2.13.6.1.1.1
ibmappnCosModeCosNamemandatory An administratively assigned name for this Class of Service.	OctetString	.1.3.6.1.4.1.2.6.2.13.6.1.1.2

Table representing all of the defined class-of-service
names for this node.  The COS node and TG tables are
accessed using the same index, which is the COS name.

ibmappnCosNameEntry row .1.3.6.1.4.1.2.6.2.13.6.2.1

The COS name is the index to this table.

Indexes

No indexes recorded

Column	Syntax	OID
ibmappnCosNamemandatory Administratively-assigned name for this class of service.	OctetString	.1.3.6.1.4.1.2.6.2.13.6.2.1.1
ibmappnCosTransPrioritymandatory Transmission priority for this class of service. Values are: Low Medium High Network	Enumeration	.1.3.6.1.4.1.2.6.2.13.6.2.1.2

This table contains all node-row information for all
class of service in this node.

ibmappnCosNodeRowEntry row .1.3.6.1.4.1.2.6.2.13.6.3.1

The COS name is the first index and a integer
is the second index to insure a unique index.

Indexes

No indexes recorded

Column	Syntax	OID
ibmappnCosNodeRowNamemandatory Administratively-assigned name for this class of service.	OctetString	.1.3.6.1.4.1.2.6.2.13.6.3.1.1
ibmappnCosNodeRowIndexmandatory Index of COS name. This same value is used to access the node and TG COS tables. Range of values is 0-255.	Integer32	.1.3.6.1.4.1.2.6.2.13.6.3.1.2
ibmappnCosNodeRowWgtmandatory Weight to be associated with the nodes that fit the criteria specified by this node row.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2.6.2.13.6.3.1.3
ibmappnCosNodeRowResistMinmandatory Minimum route addition resistance value for this node. Range of values is 0-255. The lower the value, the more desirable the node is for intermediate routing.	Integer32	.1.3.6.1.4.1.2.6.2.13.6.3.1.4
ibmappnCosNodeRowResistMaxmandatory Maximum route addition resistance value for this node. Range of values is 0-255. The lower the value, the more desirable the node is for intermediate routing.	Integer32	.1.3.6.1.4.1.2.6.2.13.6.3.1.5
ibmappnCosNodeRowMinCongestAllowmandatory Indicates whether low congestion will be tolerated. The minimum and maximum parameters will allow specifying either low-congested, high-congested, or either to be used.	Enumeration	.1.3.6.1.4.1.2.6.2.13.6.3.1.6
ibmappnCosNodeRowMaxCongestAllowmandatory Indicates whether high congestion will be tolerated. The minimum and maximum parameters will allow specifying either low-congested, high-congested, or either to be used.	Enumeration	.1.3.6.1.4.1.2.6.2.13.6.3.1.7

Table containing all the Tg-row information for all
class of service defined in this node.

ibmappnCosTgRowEntry row .1.3.6.1.4.1.2.6.2.13.6.4.1

The TgRowName and the TgRowIndex are the index
for this table.

Indexes

No indexes recorded

Column	Syntax	OID
ibmappnCosTgRowNamemandatory Administratively-assigned name for this class of service.	OctetString	.1.3.6.1.4.1.2.6.2.13.6.4.1.1
ibmappnCosTgRowIndexmandatory Index of COS name. This same value is used to access the node and TG COS tables.	Integer32	.1.3.6.1.4.1.2.6.2.13.6.4.1.2
ibmappnCosTgRowWgtmandatory Weight to be associated with the nodes that fit the criteria specified by this tg-row.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2.6.2.13.6.4.1.3
ibmappnCosTgRowEffCapMinmandatory Minimum acceptable speed for this Class of Service. The effective capacity is an integer value that indicates the actual kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.13.6.4.1.4
ibmappnCosTgRowEffCapMaxmandatory Maximum acceptable speed for this Class of Service. The effective capacity is an integer value that indicates the actual kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2.6.2.13.6.4.1.5
ibmappnCosTgRowConnCostMinmandatory Minimum acceptable cost per connect time for this Class of Service. Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255.	Integer32	.1.3.6.1.4.1.2.6.2.13.6.4.1.6
ibmappnCosTgRowConnCostMaxmandatory Maximum acceptable cost per connect time for this Class of Service. Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255.	Integer32	.1.3.6.1.4.1.2.6.2.13.6.4.1.7
ibmappnCosTgRowByteCostMinmandatory Minimum acceptable cost per byte for this Class of Service.	Integer32	.1.3.6.1.4.1.2.6.2.13.6.4.1.8
ibmappnCosTgRowByteCostMaxmandatory Maximum acceptable cost per byte for this Class of Service.	Integer32	.1.3.6.1.4.1.2.6.2.13.6.4.1.9
ibmappnCosTgRowSecurityMinmandatory Minimum acceptable security for this Class of Service.	Enumeration	.1.3.6.1.4.1.2.6.2.13.6.4.1.10
ibmappnCosTgRowSecurityMaxmandatory Maximum acceptable security for this Class of Service.	Enumeration	.1.3.6.1.4.1.2.6.2.13.6.4.1.11
ibmappnCosTgRowDelayMinmandatory Minimum acceptable propagation delay for this class of service. Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with the more valu…	Enumeration	.1.3.6.1.4.1.2.6.2.13.6.4.1.12
ibmappnCosTgRowDelayMaxmandatory Maximum acceptable propagation delay for this class of service. Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with the more valu…	Enumeration	.1.3.6.1.4.1.2.6.2.13.6.4.1.13
ibmappnCosTgRowUsr1Minmandatory Minimum acceptable value for this user defined characteristic. Range of values is 0-255.	Integer32	.1.3.6.1.4.1.2.6.2.13.6.4.1.14
ibmappnCosTgRowUsr1Maxmandatory Maximum acceptable value for this user defined characteristic. Range of values is 0-255.	Integer32	.1.3.6.1.4.1.2.6.2.13.6.4.1.15
ibmappnCosTgRowUsr2Minmandatory Minimum acceptable value for this user defined characteristic. Range of values is 0-255.	Integer32	.1.3.6.1.4.1.2.6.2.13.6.4.1.16
ibmappnCosTgRowUsr2Maxmandatory A Maximum acceptable value for this user defined characteristic.	Integer32	.1.3.6.1.4.1.2.6.2.13.6.4.1.17
ibmappnCosTgRowUsr3Minmandatory Minimum acceptable value for this user defined characteristic. Range of values is 0-255.	Integer32	.1.3.6.1.4.1.2.6.2.13.6.4.1.18
ibmappnCosTgRowUsr3Maxmandatory Maximum acceptable value for this user defined characteristic. Range of values is 0-255.	Integer32	.1.3.6.1.4.1.2.6.2.13.6.4.1.19