Hirschmann-LION-24TP-MIB Table View

Table of descriptive and status information about
the switch units in this system.

switchInfoEntry row .1.3.6.1.4.1.248.13.7.4.1.1.3.1

Table providing descriptions and status information for
switch units.

Indexes

swUnitIndex

Column	Syntax	OID
swUnitIndex This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.1.3.1.1
swHardwareVer Hardware version of the main board.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.248.13.7.4.1.1.3.1.2
swMicrocodeVer Microcode version of the main board.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.248.13.7.4.1.1.3.1.3
swLoaderVer Loader version of the main board.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.248.13.7.4.1.1.3.1.4
swBootRomVer Boot ROM code version of the main board.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.248.13.7.4.1.1.3.1.5
swOpCodeVer Operation code version of the main board.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.248.13.7.4.1.1.3.1.6
swPortNumber The number of ports on this switch.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.1.3.1.7
swPowerStatus Indicates the switch using internalPower(1), redundantPower(2) or both(3)	Enumeration Enumerated Values: 1 internalPower 2 redundantPower 3 internalAndRedundantPower	.1.3.6.1.4.1.248.13.7.4.1.1.3.1.8
swRoleInSystem Indicates the switch is master(1), backupMaster(2) or slave(3) in this system.	Enumeration Enumerated Values: 1 master 2 backupMaster 3 slave	.1.3.6.1.4.1.248.13.7.4.1.1.3.1.9
swSerialNumber Serial number of the switch.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.248.13.7.4.1.1.3.1.10
swExpansionSlot1 Type of expansion module in this switch slot 1.	Enumeration Enumerated Values: 1 notPresent 2 other 3 hundredBaseFxScMmf 4 hundredBaseFxScSmf 5 hundredBaseFxMtrjMmf 6 thousandBaseSxScMmf 7 thousandBaseSxMtrjMmf 8 thousandBaseXGbic 9 thousandBaseLxScSmf 10 thousandBaseT 11 stackingModule 12 thousandBaseSfp 13 tenHundredBaseT4port 14 tenHundredBaseFxMtrj4port 15 comboStackingSfp 16 tenHundredBaseT 17 comboThousandBaseTxSfp 18 eightPortSfpModule 19 tenGigaPortModule	.1.3.6.1.4.1.248.13.7.4.1.1.3.1.11
swExpansionSlot2 Type of expansion module in this switch slot 2.	Enumeration Enumerated Values: 1 notPresent 2 other 3 hundredBaseFxScMmf 4 hundredBaseFxScSmf 5 hundredBaseFxMtrjMmf 6 thousandBaseSxScMmf 7 thousandBaseSxMtrjMmf 8 thousandBaseXGbic 9 thousandBaseLxScSmf 10 thousandBaseT 11 stackingModule 12 thousandBaseSfp 13 tenHundredBaseT4port 14 tenHundredBaseFxMtrj4port 15 comboStackingSfp 16 tenHundredBaseT 17 comboThousandBaseTxSfp 18 eightPortSfpModule 19 tenGigaPortModule	.1.3.6.1.4.1.248.13.7.4.1.1.3.1.12
swServiceTag Service tag serial-number of the switch.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.248.13.7.4.1.1.3.1.13
swModelNumber Model number of the switch.	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.248.13.7.4.1.1.3.1.14
swEpldVer The EPLD version of the switch.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.248.13.7.4.1.1.3.1.15
swExpectedModuleOpCodeVer The module opcode version reside in the switch, note that this variable represent the desired version of the module which might plug in. For version validation, only the swExpectedModuleOpCodeVer of the master is used. …	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.248.13.7.4.1.1.3.1.16

Table about the status of individual powers.

switchIndivPowerEntry row .1.3.6.1.4.1.248.13.7.4.1.1.6.1

Table about the status of individual power.

Indexes

swIndivPowerUnitIndex swIndivPowerIndex

Column	Syntax	OID
swIndivPowerUnitIndex This is defined as swUnitIndex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.1.6.1.1
swIndivPowerIndex 1 means internal power, 2 means external power.	Enumeration Enumerated Values: 1 internalPower 2 externalPower	.1.3.6.1.4.1.248.13.7.4.1.1.6.1.2
swIndivPowerStatus notPresent(1) means not present, green(2) means up, red(3) means down.	Enumeration Enumerated Values: 1 notPresent 2 green 3 red	.1.3.6.1.4.1.248.13.7.4.1.1.6.1.3

The fan status table.

switchFanEntry row .1.3.6.1.4.1.248.13.7.4.1.1.9.1

A conceptual row of the switchFanTable.

Indexes

switchUnitIndex switchFanIndex

Column	Syntax	OID
switchUnitIndex The unit of the switch for the stackable device.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.1.9.1.1
switchFanIndex The unit number of the fan.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.1.9.1.2
switchFanStatus Indicating the status of the fan, 1:ok; 2:failure.	Enumeration Enumerated Values: 1 ok 2 failure	.1.3.6.1.4.1.248.13.7.4.1.1.9.1.3
switchFanAdminSpeed The speed of the fan, measured in rpm (rotations per minute). Set this object to 0 to enter auto mode, set to other values to enter manual mode.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.1.9.1.4
switchFanFailureCount The total failure count of the fan since the switch has reboot.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.1.9.1.5
switchFanOperSpeed The operational value of the fan speed, measured in rpm (rotations per minute).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.1.9.1.6

The table which collects temperature infomration of the
switch.

switchThermalTempEntry row .1.3.6.1.4.1.248.13.7.4.1.1.11.1

A conceptual row of the switchThermalTempTable.

Indexes

switchThermalTempUnitIndex switchThermalTempThermalIndex

Column	Syntax	OID
switchThermalTempUnitIndex The unit of the switch for stackable device.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.1.11.1.1
switchThermalTempThermalIndex The thermal index of the switch.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.1.11.1.2
switchThermalTempValue The temperature value in the device in grade Celsius.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.1.11.1.3

The table for configuring the thermal action.

switchThermalActionEntry row .1.3.6.1.4.1.248.13.7.4.1.1.12.1

A conceptual row of the switchThermalActionTable.

Indexes

switchThermalActionUnitIndex switchThermalActionThermalIndex switchThermalActionIndex

Column	Syntax	OID
switchThermalActionUnitIndex The unit of the switch for stackable device.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.1.12.1.1
switchThermalActionThermalIndex The thermal index of the switch.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.1.12.1.2
switchThermalActionIndex The action index of the switchTheramlActionTable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.1.12.1.3
switchThermalActionRisingThreshold The rising threshold of the switch temperature.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.1.12.1.4
switchThermalActionFallingThreshold The falling threshold of the switch temperature.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.1.12.1.5
switchThermalActionAction The action that will be taken when the temperature exceeds the rising threshold or falls below the falling threshold.	Bitsr/w Enumerated Values: 0 trap	.1.3.6.1.4.1.248.13.7.4.1.1.12.1.6
switchThermalActionStatus Set valid(1) to create an entry, Set Invalid(2) to delete an entry.	ValidStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.248.13.7.4.1.1.12.1.7

Table of descriptive and status information about
the switch modules in this system.

switchModuleInfoEntry row .1.3.6.1.4.1.248.13.7.4.1.1.13.1

Table providing descriptions and status information for
switch modules.

Indexes

swModuleUnitIndex swModuleModuleIndex

Column	Syntax	OID
swModuleUnitIndex This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.1.13.1.1
swModuleModuleIndex This object identifies the module within the switch for which this entry contains information.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.1.13.1.2
swModuleHardwareVer Hardware version of the module board.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.248.13.7.4.1.1.13.1.3
swModuleMicrocodeVer Microcode version of the module board.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.248.13.7.4.1.1.13.1.4
swModuleLoaderVer Loader version of the module board.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.248.13.7.4.1.1.13.1.5
swModuleBootRomVer Boot ROM code version of the module board.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.248.13.7.4.1.1.13.1.6
swModuleOpCodeVer Operation code version of the module board.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.248.13.7.4.1.1.13.1.7
swModulePortNumber The number of ports of this module.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.1.13.1.8
swModuleSerialNumber Serial number of the module.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.248.13.7.4.1.1.13.1.9
swModuleType Type of module.	Enumeration Enumerated Values: 1 notPresent 2 other 3 hundredBaseFxScMmf 4 hundredBaseFxScSmf 5 hundredBaseFxMtrjMmf 6 thousandBaseSxScMmf 7 thousandBaseSxMtrjMmf 8 thousandBaseXGbic 9 thousandBaseLxScSmf 10 thousandBaseT 11 stackingModule 12 thousandBaseSfp 13 tenHundredBaseT4port 14 tenHundredBaseFxMtrj4port 15 comboStackingSfp 16 tenHundredBaseT 17 comboThousandBaseTxSfp 18 eightPortSfpModule 19 tenGigaPortModule	.1.3.6.1.4.1.248.13.7.4.1.1.13.1.10
swModuleModelNumber Model number of the module.	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.248.13.7.4.1.1.13.1.11
swModuleEpldVer The EPLD version of the module.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.248.13.7.4.1.1.13.1.12
swModuleDescr A textual description of the entity to describe the module.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.248.13.7.4.1.1.13.1.13

Table of descriptive and status information describing
the configuration of each switch port. This table also
contains information about each trunk.

portEntry row .1.3.6.1.4.1.248.13.7.4.1.2.1.1

An entry in the table, describing the configuration of
one switch port or trunk.

Indexes

portIndex

Column	Syntax	OID
portIndex The port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.2.1.1.1
portName The name of the port or trunk. This is the same as ifAlias in the IF-MIB (RFC2863 or later).	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.248.13.7.4.1.2.1.1.2
portType Indicates the port type of the configuration of the switch.	Enumeration Enumerated Values: 1 other 2 hundredBaseTX 3 hundredBaseFX 4 thousandBaseSX 5 thousandBaseLX 6 thousandBaseT 7 thousandBaseGBIC 8 thousandBaseSfp 9 hundredBaseFxScSingleMode 10 hundredBaseFxScMultiMode 11 thousandBaseCX 12 tenG	.1.3.6.1.4.1.248.13.7.4.1.2.1.1.3
portSpeedDpxCfg Configures the speed and duplex mode for a port or trunk, according to: halfDuplex10(2) - 10Mbps and half duplex mode fullDuplex10(3) - 10Mbps and full duplex mode halfDuplex100(4) - 100Mbps and half…	Enumerationr/w Enumerated Values: 1 reserved 2 halfDuplex10 3 fullDuplex10 4 halfDuplex100 5 fullDuplex100 6 halfDuplex1000 7 fullDuplex1000 8 halfDuplex10g 9 fullDuplex10g	.1.3.6.1.4.1.248.13.7.4.1.2.1.1.4
portFlowCtrlCfg (1) Flow control mechanism is enabled with tx and rx pause mechansim. If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 5 tx 6 rx	.1.3.6.1.4.1.248.13.7.4.1.2.1.1.5
portCapabilities Port or trunk capabilities.	Bitsr/w Enumerated Values: 0 portCap10half 1 portCap10full 2 portCap100half 3 portCap100full 4 portCap1000half 5 portCap1000full 6 portCap10gHalf 7 portCap10gFull 8 reserved8 9 reserved9 10 reserved10 11 reserved11 12 reserved12 13 reserved13 14 portCapSym 15 portCapFlowCtrl	.1.3.6.1.4.1.248.13.7.4.1.2.1.1.6
portAutonegotiation Whether auto-negotiation is enabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.248.13.7.4.1.2.1.1.7
portSpeedDpxStatus The operating speed and duplex mode of the switched port or trunk. If the entry represents a trunk, the speed is that of its individual members unless the member ports have been inconsistently configured in which case t…	Enumeration Enumerated Values: 1 error 2 halfDuplex10 3 fullDuplex10 4 halfDuplex100 5 fullDuplex100 6 halfDuplex1000 7 fullDuplex1000 8 halfDuplex10g 9 fullDuplex10g	.1.3.6.1.4.1.248.13.7.4.1.2.1.1.8
portFlowCtrlStatus (2) BackPressure flow control mechanism is used. (3) IEEE 802.3 flow control mechanism is used. (4) Flow control mechanism is disabled. If the entry represents a trunk and the member ports have been inconsistently confi…	Enumeration Enumerated Values: 1 error 2 backPressure 3 dot3xFlowControl 4 none	.1.3.6.1.4.1.248.13.7.4.1.2.1.1.9
portTrunkIndex The trunk to which this port belongs. A value of 0 means that this port does not belong to any trunk. A value greater than zero means that this port belongs to a trunk in the trunkIndex, defined by the corresponding tru…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.2.1.1.10
portComboForcedMode This determines the running mode of a combo port. For a non-combo port, this variable has a value of none(1), and setting this variable to none(1) has no effect. For a combo port, this has its own valid values not equal…	Enumerationr/w Enumerated Values: 1 none 2 copperForced 3 copperPreferredAuto 4 sfpForced 5 sfpPreferredAuto	.1.3.6.1.4.1.248.13.7.4.1.2.1.1.12

Table describing the configuration and status of each
trunk.

trunkEntry row .1.3.6.1.4.1.248.13.7.4.1.3.3.1

An entry describing the configuration and status of a
particular trunk.

Indexes

trunkIndex

Column	Syntax	OID
trunkIndex Identifies the trunk within the switch that is described by the table entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.3.3.1.1
trunkPorts The complete set of ports currently associated with this trunk.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.248.13.7.4.1.3.3.1.2
trunkCreation A value of static(1) means a statically configured trunk. A value of lacp(2) means an LACP-configured trunk.	Enumeration Enumerated Values: 1 static 2 lacp	.1.3.6.1.4.1.248.13.7.4.1.3.3.1.3
trunkStatus Writing this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry. A trunk created by LACP cannot be manually destroyed or (re)configured.	ValidStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.248.13.7.4.1.3.3.1.4

Table for LACP port configuration.

lacpPortEntry row .1.3.6.1.4.1.248.13.7.4.1.4.1.1

Entry for LACP port configuration. While an entry may
exist for a particular port, the port may not support
LACP and an attempt to enable LACP may result in
failure.

Indexes

lacpPortIndex

Column	Syntax	OID
lacpPortIndex The port interface of the lacpPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.4.1.1.1
lacpPortStatus Whether 802.3ad LACP is enabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.248.13.7.4.1.4.1.1.2

The table manages port settings for Spanning Tree
Protocol 802.1d, 802.1w or 802.1s depending on the
value specified by staProtocolType.

staPortEntry row .1.3.6.1.4.1.248.13.7.4.1.5.2.1

The conceptual entry of staPortTable.

Indexes

No indexes recorded

Column	Syntax	OID
staPortFastForward Whether fast forwarding is enabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.248.13.7.4.1.5.2.1.2
staPortProtocolMigration When operating in RSTP (version 2) mode, writing true(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effect and it always returns false(2) when read.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.248.13.7.4.1.5.2.1.3
staPortAdminEdgePort The administrative value of the edge port parameter. A value of true(1) indicates that this port should be assumed as an edge-port and a value of false(2) indicates that this port should be assumed as a non-edge-port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.248.13.7.4.1.5.2.1.4
staPortOperEdgePort The operational value of the edge port parameter. The object is initialized to the value of staPortAdminEdgePort and is set false when a BPDU is received.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.248.13.7.4.1.5.2.1.5
staPortAdminPointToPoint The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of f…	Enumerationr/w Enumerated Values: 0 forceTrue 1 forceFalse 2 auto	.1.3.6.1.4.1.248.13.7.4.1.5.2.1.6
staPortOperPointToPoint The operational point-to-point status of the LAN segment attached to this port. This indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-de…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.248.13.7.4.1.5.2.1.7
staPortSystemStatus Per-port spanning tree status. (1) Spanning tree protocol is enabled. (2) Spanning tree protocol is disabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.248.13.7.4.1.5.2.1.9
staPortLongAdminPathCost The admin value of the RSTP path cost or MST external pathcost. The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning tree root which include this port. This obje…	Integer32r/w Constraints: range: 1-200000000	.1.3.6.1.4.1.248.13.7.4.1.5.2.1.10
staPortLongOperPathCost The oper value of the RSTP path cost or MST external pathcost. The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning tree root which include this port. This objec…	Integer32 Constraints: range: 1-200000000	.1.3.6.1.4.1.248.13.7.4.1.5.2.1.11

This table is used to configure the property of a specific
instance in Multiple Spanning Tree or Rapid Spanning Tree.
If Rapid Spanning Tree protocol is in use, the
mstInstanceEditIndex is always 0.

xstInstanceCfgEntry row .1.3.6.1.4.1.248.13.7.4.1.5.6.4.1

A conceptual row containing the property of the RST or MST instance.

Indexes

xstInstanceCfgIndex

Column	Syntax	OID
xstInstanceCfgIndex An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance.	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.1
xstInstanceCfgPriority The priority of a specific spanning tree instance. The value assigned should be in the range 0-61440 in steps of 4096.	Integer32r/w Constraints: range: 0-61440	.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.2
xstInstanceCfgTimeSinceTopologyChange The time (in hundredths of a second) since the last topology change detected by the bridge entity in RST or MST.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.3
xstInstanceCfgTopChanges The total number of topology changes detected by this bridge in RST or MST since the management entity was last reset or initialized.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.4
xstInstanceCfgDesignatedRoot The bridge identifier of the root of the spanning tree as determined by the Multiple Spanning Tree Protocol. (802.1s) or Rapid Spanning Tree Protocol (802.1w) executed by this node. This value is used as the root identi…	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.5
xstInstanceCfgRootCost The cost of the path to the root as seen from this bridge of the RST or MST.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.6
xstInstanceCfgRootPort The number of the port which offers the lowest cost path from this bridge to the root bridge of the RST or MST.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.7
xstInstanceCfgMaxAge The maximum age of Multiple Spanning Tree Protocol (802.1s) or Rapid Spanning Tree Protocol (802.1w) information learned from the network on any port before it is discarded, in units of hundredths of a se…	BRIDGE-MIBTimeout	.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.8
xstInstanceCfgHelloTime The amount of time between the transmission of configuration bridge PDUs by this node on any port when it is the root of the specific spanning tree or trying to become so, in units of hundredths of a second. This is the…	BRIDGE-MIBTimeout	.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.9
xstInstanceCfgHoldTime This time value determines the interval length during which no more than two configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.	BRIDGE-MIBTimeout	.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.10
xstInstanceCfgForwardDelay For RST or MST protocol, this time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the forwarding state. The value determines how long the por…	BRIDGE-MIBTimeout	.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.11
xstInstanceCfgBridgeMaxAge For RST or MST protocol, the time (in hundredths of second) that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the va…	BRIDGE-MIBTimeout	.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.12
xstInstanceCfgBridgeHelloTime For RST or MST protocol,the time (in hundredths of a second) that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D-1990 to be 1 second.	BRIDGE-MIBTimeout	.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.13
xstInstanceCfgBridgeForwardDelay For RST or MST protocol, the time (in hundredths of a second) that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to…	BRIDGE-MIBTimeout	.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.14
xstInstanceCfgTxHoldCount For RST or MST protocol, the value used by the port transmit state machine to limit the maximum transmission rate.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.15
xstInstanceCfgPathCostMethod For RST or MST protocol, this indicates the type of spanning tree path cost mode used by the switch. The mode applies to all instances of the Spanning Tree protocol running on the switch. When the value o…	StaPathCostMode Type Values: 1 short 2 long	.1.3.6.1.4.1.248.13.7.4.1.5.6.4.1.16

The extension table for dot1dStpPortEntry to provide
additional Spanning Tree information and configuration.

xstInstancePortEntry row .1.3.6.1.4.1.248.13.7.4.1.5.6.5.1

The conceptual row for xstInstancePortTable.

Indexes

xstInstanceCfgIndex BRIDGE-MIBdot1dStpPort

Column	Syntax	OID
xstInstancePortPriority Defines the priority used for this port in the Spanning Tree Algorithm. If the path cost for all ports on a switch is the same, the port with the highest priority (i.e., lowest value) will be configured as an active lin…	Integer32r/w Constraints: range: 0-240	.1.3.6.1.4.1.248.13.7.4.1.5.6.5.1.3
xstInstancePortState The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame: discarding(1): Port receives configuration messages, …	Enumeration Enumerated Values: 1 discarding 2 learning 3 forwarding	.1.3.6.1.4.1.248.13.7.4.1.5.6.5.1.4
xstInstancePortEnable The enabled/disabled status of the port.	P-BRIDGE-MIBEnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.248.13.7.4.1.5.6.5.1.5
xstInstancePortDesignatedRoot The unique bridge identifier of the bridge recorded as the root in the configuration BPDUs transmitted by the designated bridge for the segment to which the port is attached.	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.248.13.7.4.1.5.6.5.1.7
xstInstancePortDesignatedCost The path cost of the designated port of the segment connected to this port. This value is compared to the root path cost field in received bridge PDUs.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.5.6.5.1.8
xstInstancePortDesignatedBridge The bridge identifier of the bridge which this port considers to be the designated bridge for this port's segment.	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.248.13.7.4.1.5.6.5.1.9
xstInstancePortDesignatedPort The port identifier of the port on the designated bridge for this port's segment.	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.248.13.7.4.1.5.6.5.1.10
xstInstancePortForwardTransitions The number of times this port has transitioned from the learning state to the forwarding state.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.248.13.7.4.1.5.6.5.1.11
xstInstancePortPortRole The role of the port in the RST or MST protocol: (1) The port has no role within the spanning tree (2) The port is part of the active topology connecting the bridge to the root bridge (i.e., root port) (3) The port …	Enumeration Enumerated Values: 1 disabled 2 root 3 designated 4 alternate 5 backup 6 master	.1.3.6.1.4.1.248.13.7.4.1.5.6.5.1.12
xstInstancePortAdminPathCost The admin value of the RST pathcost or MST internal pathcost, in the range of 1 to 200000000. This parameter is used to determine the best path between devices. Therefore, lower values should be assigned to ports attach…	Integer32r/w Constraints: range: 1-200000000	.1.3.6.1.4.1.248.13.7.4.1.5.6.5.1.13
xstInstancePortOperPathCost The oper value of the RST pathcost or MST internal pathcost, in the range of 1 to 200000000. This parameter is used to determine the best path between devices. Therefore, lower values should be assigned to ports attache…	Integer32 Constraints: range: 1-200000000	.1.3.6.1.4.1.248.13.7.4.1.5.6.5.1.14

The instance table for the Multiple Spanning Tree region

mstInstanceEditEntry row .1.3.6.1.4.1.248.13.7.4.1.5.6.6.1

A conceptual row containing the status of the MSTP instance.

Indexes

mstInstanceEditIndex

Column	Syntax	OID
mstInstanceEditIndex An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance.	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.248.13.7.4.1.5.6.6.1.1
mstInstanceEditVlansMap A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with vlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc., The most significant bit of each octet corresponds…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.248.13.7.4.1.5.6.6.1.2
mstInstanceEditVlansMap2k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with vlanIndex values of 1024 through 1031; the second octet to VLANs 1032 throug…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.248.13.7.4.1.5.6.6.1.3
mstInstanceEditVlansMap3k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with vlanIndex values of 2048 through 2055; the second octet to VLANs 2056 throug…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.248.13.7.4.1.5.6.6.1.4
mstInstanceEditVlansMap4k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with vlanIndex values of 3072 through 3079; the second octet to VLANs 3080 throug…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.248.13.7.4.1.5.6.6.1.5
mstInstanceEditRemainingHops The remaining hop count for this MST instance.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.5.6.6.1.6

The Multiple Spanning Tree region instance vlan mapped table.

mstInstanceOperEntry row .1.3.6.1.4.1.248.13.7.4.1.5.6.7.1

A conceptual row containing the status of the MSTP instance.

Indexes

mstInstanceOperIndex

Column	Syntax	OID
mstInstanceOperIndex An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance.	Integer32 Constraints: range: 0-4094	.1.3.6.1.4.1.248.13.7.4.1.5.6.7.1.1
mstInstanceOperVlansMap A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with vlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc., The most significant bit of each octet corresponds…	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.248.13.7.4.1.5.6.7.1.2
mstInstanceOperVlansMap2k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with vlanIndex values of 1024 through 1031; the second octet to VLANs 1032 throug…	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.248.13.7.4.1.5.6.7.1.3
mstInstanceOperVlansMap3k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with vlanIndex values of 2048 through 2055; the second octet to VLANs 2056 throug…	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.248.13.7.4.1.5.6.7.1.4
mstInstanceOperVlansMap4k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with vlanIndex values of 3072 through 3079; the second octet to VLANs 3080 throug…	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.248.13.7.4.1.5.6.7.1.5

Table for port mirroring, enabling a port to be mirrored
to/from another port. Not all ports can be mirrored and
limitations may apply as to which ports can be used as either
source or destination ports.

mirrorEntry row .1.3.6.1.4.1.248.13.7.4.1.8.1.1

The conceptual row of mirrorTable.

Indexes

mirrorDestinationPort mirrorSourcePort

Column	Syntax	OID
mirrorDestinationPort The destination port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.8.1.1.1
mirrorSourcePort The source port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.8.1.1.2
mirrorType If this value is rx(1), receive packets will be mirrored. If this value is tx(2), transmit packets will be mirrored. If this value is both(3), both receive and transmit packets will be mirrored.	Enumerationr/w Enumerated Values: 1 rx 2 tx 3 both	.1.3.6.1.4.1.248.13.7.4.1.8.1.1.3
mirrorStatus Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.	ValidStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.248.13.7.4.1.8.1.1.4

Table for current router ports.

igmpSnoopRouterCurrentEntry row .1.3.6.1.4.1.248.13.7.4.1.9.8.1

Entry for current router ports.

Indexes

igmpSnoopRouterCurrentVlanIndex

Column	Syntax	OID
igmpSnoopRouterCurrentVlanIndex The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopRou…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.248.13.7.4.1.9.8.1.1
igmpSnoopRouterCurrentPorts The set of ports which are current router ports, including static router ports. Please refer to igmpSnoopRouterStaticTable.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.248.13.7.4.1.9.8.1.2
igmpSnoopRouterCurrentStatus The set of ports which are static router ports.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.248.13.7.4.1.9.8.1.3

Table for static router ports.

igmpSnoopRouterStaticEntry row .1.3.6.1.4.1.248.13.7.4.1.9.9.1

Entry for static router ports.

Indexes

igmpSnoopRouterStaticVlanIndex

Column	Syntax	OID
igmpSnoopRouterStaticVlanIndex The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopRou…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.248.13.7.4.1.9.9.1.1
igmpSnoopRouterStaticPorts The set of ports which are static router ports.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.248.13.7.4.1.9.9.1.2
igmpSnoopRouterStaticStatus Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.	ValidStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.248.13.7.4.1.9.9.1.3

Table for current multicast addresses.

igmpSnoopMulticastCurrentEntry row .1.3.6.1.4.1.248.13.7.4.1.9.10.1

Entry for current multicast addresses.

Indexes

igmpSnoopMulticastCurrentVlanIndex igmpSnoopMulticastCurrentIpAddress

Column	Syntax	OID
igmpSnoopMulticastCurrentVlanIndex The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopMul…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.248.13.7.4.1.9.10.1.1
igmpSnoopMulticastCurrentIpAddress IP address of multicast group.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.248.13.7.4.1.9.10.1.2
igmpSnoopMulticastCurrentPorts The set of ports which are members of a multicast group, including static members. Please refer to igmpSnoopMulticastStaticTable.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.248.13.7.4.1.9.10.1.3
igmpSnoopMulticastCurrentStatus The set of ports which are static members.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.248.13.7.4.1.9.10.1.4

Table for static multicast addresses.

igmpSnoopMulticastStaticEntry row .1.3.6.1.4.1.248.13.7.4.1.9.11.1

Entry for static multicast addresses.

Indexes

igmpSnoopMulticastStaticVlanIndex igmpSnoopMulticastStaticIpAddress

Column	Syntax	OID
igmpSnoopMulticastStaticVlanIndex The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopMul…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.248.13.7.4.1.9.11.1.1
igmpSnoopMulticastStaticIpAddress IP address of multicast group.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.248.13.7.4.1.9.11.1.2
igmpSnoopMulticastStaticPorts The set of ports which are members.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.248.13.7.4.1.9.11.1.3
igmpSnoopMulticastStaticStatus Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.	ValidStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.248.13.7.4.1.9.11.1.4

A table of iPAddrEntry.

iPAddrEntry row .1.3.6.1.4.1.248.13.7.4.1.10.16.1

A set of configuration parameters for a particular
network interface on this device. If the device has no network
interface, this table is empty.

The index is composed of the ifIndex assigned to the
corresp…

Indexes

iPAddrIPAddress iPAddrSubnetMask

Column	Syntax	OID
iPAddrIPAddress The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the IPAddrIPAddress or IPAddrSubnetMask is 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out what …	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.248.13.7.4.1.10.16.1.1
iPAddrSubnetMask The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the IPAddrIPAddress or IPAddrSubnetMask are 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out wha…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.248.13.7.4.1.10.16.1.2
iPAddrIfIndex The VLAN interface being used by this table entry. Only the VLAN interfaces which have an IP configured will appear in the table.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.10.16.1.3
iPAddrPrimaryInterface Whether this is a primary interface.	Enumerationr/w Enumerated Values: 1 primary 2 secondary	.1.3.6.1.4.1.248.13.7.4.1.10.16.1.4
iPAddrUnnumbered Whether this is an unnumbered interface.	Enumeration Enumerated Values: 1 unnumbered 2 notUnnumbered	.1.3.6.1.4.1.248.13.7.4.1.10.16.1.5
iPAddrStatus The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicate…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.248.13.7.4.1.10.16.1.6

Table to manage the control of broadcast storms for ports.

bcastStormEntry row .1.3.6.1.4.1.248.13.7.4.1.11.1.1

The conceptual row of bcastStormTable.

Indexes

bcastStormIfIndex

Column	Syntax	OID
bcastStormIfIndex The port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.11.1.1.1
bcastStormStatus Whether broadcast storm protection is enabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.248.13.7.4.1.11.1.1.2
bcastStormPktRate Broadcast storm threshold as packets per second. If this entry is for a trunk, this is the value for each member port. For a 10 Gbps port, the range is 1042 to 262143.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.11.1.1.4

Table for VLAN configuration.

vlanEntry row .1.3.6.1.4.1.248.13.7.4.1.12.1.1

Entry for VLAN configuration.

Indexes

vlanIndex

Column	Syntax	OID
vlanIndex Based on dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.248.13.7.4.1.12.1.1.1
vlanAddressMethod Method to get the IP address.	Enumerationr/w Enumerated Values: 1 user 2 bootp 3 dhcp	.1.3.6.1.4.1.248.13.7.4.1.12.1.1.2

Table for port configuration in VLAN.

vlanPortEntry row .1.3.6.1.4.1.248.13.7.4.1.12.2.1

Entry for port configuration in VLAN.

Indexes

vlanPortIndex

Column	Syntax	OID
vlanPortIndex The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qPvid in the Q-BRIDG…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.12.2.1.1
vlanPortMode This variable sets the 802.1Q VLAN mode. Setting it to hybrid(1) sets a hybrid link. Setting it to dot1qTrunk(2) sets a trunk link. Setting it to access(3) sets an access link.	Enumerationr/w Enumerated Values: 1 hybrid 2 dot1qTrunk 3 access	.1.3.6.1.4.1.248.13.7.4.1.12.2.1.2

Table for IP precedence priority mapping.

prioIpPrecEntry row .1.3.6.1.4.1.248.13.7.4.1.13.2.1

Entry for IP precedence priority mapping.

Indexes

prioIpPrecPort prioIpPrecValue

Column	Syntax	OID
prioIpPrecPort The port or the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.13.2.1.2
prioIpPrecValue Value of IP ToS Precedence as specified in the packet header.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.248.13.7.4.1.13.2.1.3
prioIpPrecCos Class of Service (CoS) as defined by dot1dTrafficClassPriority in the P-BRIDGE-MIB. The IP ToS precedence value in the same table row will be mapped to this CoS. This CoS is then further mapped to the hardware queue acc…	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.248.13.7.4.1.13.2.1.4

Table for IP DSCP priority mapping.

prioIpDscpEntry row .1.3.6.1.4.1.248.13.7.4.1.13.4.1

Entry for IP DSCP priority mapping.

Indexes

prioIpDscpPort prioIpDscpValue

Column	Syntax	OID
prioIpDscpPort The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.13.4.1.1
prioIpDscpValue Value of IP DSCP as specified in the packet header.	Integer32 Constraints: range: 0-63	.1.3.6.1.4.1.248.13.7.4.1.13.4.1.2
prioIpDscpCos Class of Service as defined by dot1dTrafficClassPriority in the P-BRIDGE-MIB. The prioIpDscpValue value in the same table row will be mapped to this Class of Service (CoS). This CoS is then further mapped to the hardwar…	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.248.13.7.4.1.13.4.1.3

Table for IP port priority mapping.

prioIpPortEntry row .1.3.6.1.4.1.248.13.7.4.1.13.7.1

Entry for IP port priority mapping.

Indexes

prioIpPortPhysPort prioIpPortValue

Column	Syntax	OID
prioIpPortPhysPort The port or the trunk (excluding trunk member) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.13.7.1.1
prioIpPortValue IP port for this value.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.248.13.7.4.1.13.7.1.2
prioIpPortCos Class of service for this entry.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.248.13.7.4.1.13.7.1.3
prioIpPortStatus Writing this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry.	ValidStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.248.13.7.4.1.13.7.1.4

Table for per port weighted round robin (WRR).

prioWrrPortEntry row .1.3.6.1.4.1.248.13.7.4.1.13.12.1

Entry for per port weighted round robin (WRR).

Indexes

prioWrrPortIfIndex prioWrrPortTrafficClass

Column	Syntax	OID
prioWrrPortIfIndex The port interface of the prioWrrPortEntry. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.13.12.1.1
prioWrrPortTrafficClass Traffic class for this entry, as defined in dot1dTrafficClass in the P-BRIDGE-MIB. The actual maximum depends on the hardware, and is equal to dot1dPortNumTrafficClasses-1.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.248.13.7.4.1.13.12.1.2
prioWrrPortWeight Weight for this entry.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.248.13.7.4.1.13.12.1.3

A list of trap destination entries.

trapDestEntry row .1.3.6.1.4.1.248.13.7.4.1.14.1.1

A destination entry describes the destination IP address,
the community string, and SNMP version to use when sending
a trap.

Indexes

trapDestAddress

Column	Syntax	OID
trapDestAddress The address to send traps.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.248.13.7.4.1.14.1.1.1
trapDestCommunity A community to which this destination address belongs.	OctetStringr/w Constraints: range: 0-127	.1.3.6.1.4.1.248.13.7.4.1.14.1.1.2
trapDestStatus Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.	ValidStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.248.13.7.4.1.14.1.1.3
trapDestVersion Determines the version of the trap that is to be sent to the trap receiver. If the value is 1, then an SNMP version 1 trap is sent and if the value is 2, an SNMP version 2 trap is sent.	Enumerationr/w Enumerated Values: 1 version1 2 version2	.1.3.6.1.4.1.248.13.7.4.1.14.1.1.4
trapDestUdpPort Determines the UDP port number that the trap will be sent to.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.248.13.7.4.1.14.1.1.5

Table for rate limit of each port.

rateLimitPortEntry row .1.3.6.1.4.1.248.13.7.4.1.16.1.2.1

Entry for rate limit of each port.

Indexes

rlPortIndex

Column	Syntax	OID
rlPortIndex The port and the trunk (including trunk member) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.16.1.2.1.1
rlPortInputLimit Value of the input rate limit. Its unit is megabits per second. For a 100 Mbps port, the range is 1 to 100. For a 1000 Mbps port, the range is 1 to 1000. For a 10 Gbps port, the range is 1 to 10000.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.16.1.2.1.2
rlPortOutputLimit Value of the output rate limit. Its unit is megabits per second. For a 100 Mbps port, the range is 1 to 100. For a 1000 Mbps port, the range is 1 to 1000. For a 10 Gbps port, the range is 1 to 10000.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.16.1.2.1.3
rlPortInputStatus Whether input rate limit is enabled for this port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.248.13.7.4.1.16.1.2.1.6
rlPortOutputStatus Whether output rate limit is enabled for this port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.248.13.7.4.1.16.1.2.1.7

The marker table.

markerEntry row .1.3.6.1.4.1.248.13.7.4.1.16.2.1.1

Entry for marker table.

Indexes

markerIfIndex markerAclName

Column	Syntax	OID
markerIfIndex The interface index of the marker table. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.16.2.1.1.1
markerAclName The name of an ACL. Within a feature a unique name is used to identify the list to which the entry belongs in the device.	OctetString Constraints: range: 1-15	.1.3.6.1.4.1.248.13.7.4.1.16.2.1.1.2
markerActionBitList The marker action bit list, in right to left order. for example: 0x3(11 in binary) means dscp(0) and precedence(1) 0x4(100 in binary) means priority(2).	Bitsr/w Enumerated Values: 0 dscp 1 precedence 2 priority	.1.3.6.1.4.1.248.13.7.4.1.16.2.1.1.3
markerDscp The DSCP value of the marker entry.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.248.13.7.4.1.16.2.1.1.4
markerPrecedence The precedence value of the marker entry.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.248.13.7.4.1.16.2.1.1.5
markerPriority The priority value of the marker entry.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.248.13.7.4.1.16.2.1.1.6
markerStatus The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicate…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.248.13.7.4.1.16.2.1.1.7

Table for ACL to CoS Mapping.

prioAclToCosMappingEntry row .1.3.6.1.4.1.248.13.7.4.1.16.3.1.1

Entry for ACL to CoS Mapping.

Indexes

prioAclToCosMappingIfIndex prioAclToCosMappingAclName

Column	Syntax	OID
prioAclToCosMappingIfIndex The port interface of the prioAclToCosMappingEntry. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.16.3.1.1.1
prioAclToCosMappingAclName The name of an IP ACL. Within a feature a unique name is used to identify the list to which the entry belongs in the device.	OctetString Constraints: range: 1-15	.1.3.6.1.4.1.248.13.7.4.1.16.3.1.1.2
prioAclToCosMappingCosValue CoS value of the prioAclToCosMappingTable.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.248.13.7.4.1.16.3.1.1.3
prioAclToCosMappingStatus The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicate…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.248.13.7.4.1.16.3.1.1.4

The port security(MAC binding) Table.

portSecPortEntry row .1.3.6.1.4.1.248.13.7.4.1.17.2.1.1

The entry of portSecPortTable.

Indexes

portSecPortIndex

Column	Syntax	OID
portSecPortIndex The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.17.2.1.1.1
portSecPortStatus Set enabled(1) to enable port security and set disabled(2) to disable port security.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.248.13.7.4.1.17.2.1.1.2
portSecAction The corresponding actions that will take place when a port is under intrusion, when this variable is set to none(1), no action will be performed, when this variable is set to trap(2), a swPortSecurityTrap trap will be s…	Enumerationr/w Enumerated Values: 1 none 2 trap 3 shutdown 4 trapAndShutdown	.1.3.6.1.4.1.248.13.7.4.1.17.2.1.1.3
portSecMaxMacCount The maximun number of MAC addresses that will be learned and locked. When we change the value of this variable, if the portSecPortStatus is enabled, we will discard all secure MAC and begin to learn again, until the num…	Integer32r/w Constraints: range: 0-1024	.1.3.6.1.4.1.248.13.7.4.1.17.2.1.1.4

The table for multiple RADIUS server.

radiusMultipleServerEntry row .1.3.6.1.4.1.248.13.7.4.1.17.4.7.1

The conceptual row for radiusMultipleServerTable.

Indexes

radiusMultipleServerIndex

Column	Syntax	OID
radiusMultipleServerIndex The RADIUS multiple server index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.17.4.7.1.1
radiusMultipleServerAddress IP address of a multiple RADIUS server.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.248.13.7.4.1.17.4.7.1.2
radiusMultipleServerPortNumber IP port number of a multiple RADIUS server.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.248.13.7.4.1.17.4.7.1.3
radiusMultipleServerKey Key for RADIUS. This variable can only be set. When this variable is read, it always returns a zero-length string.	OctetStringr/w Constraints: range: 0-48	.1.3.6.1.4.1.248.13.7.4.1.17.4.7.1.4
radiusMultipleServerRetransmit Maximum number of retransmissions for RADIUS.	Integer32r/w Constraints: range: 1-30	.1.3.6.1.4.1.248.13.7.4.1.17.4.7.1.5
radiusMultipleServerTimeout Timeout for RADIUS.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.248.13.7.4.1.17.4.7.1.6
radiusMultipleServerStatus Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.	ValidStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.248.13.7.4.1.17.4.7.1.8

The table for Secure Shell Connection.

sshConnInfoEntry row .1.3.6.1.4.1.248.13.7.4.1.17.6.6.1

The conceptual row for sshConnInfoTable.

Indexes

sshConnID

Column	Syntax	OID
sshConnID The connection ID of the Secure Shell Connection.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.17.6.6.1.1
sshConnMajorVersion The SSH major version.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.17.6.6.1.2
sshConnMinorVersion The SSH minor version.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.13.7.4.1.17.6.6.1.3
sshConnStatus The SSH connection State. negotiationStart(1) means the SSH is in its negotiation start state, authenticationStart(2) means the SSH is in authentication start state, sessionStart(3) means the SSH is in session start Sta…	Enumeration Enumerated Values: 1 negotiationStart 2 authenticationStart 3 sessionStart	.1.3.6.1.4.1.248.13.7.4.1.17.6.6.1.5
sshConnUserName The user name of the connection.	OctetString Constraints: range: 1-8	.1.3.6.1.4.1.248.13.7.4.1.17.6.6.1.6
sshDisconnect Set the variable to disconnect the connection, noDisconnect(1) will always be obtained when reading this variable.	Enumerationr/w Enumerated Values: 1 noDisconnect 2 disconnect	.1.3.6.1.4.1.248.13.7.4.1.17.6.6.1.7
sshConnEncryptionTypeStr The encryption type of the SSH.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.248.13.7.4.1.17.6.6.1.8

The conceptual table of all of sshUserEntry.

sshUserEntry row .1.3.6.1.4.1.248.13.7.4.1.17.6.29.1

The conceptual row for sshUserTable.

Indexes

sshUserName

Column	Syntax	OID
sshUserName User Name.	OctetString Constraints: range: 1-8	.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.1
sshUserRsaKey1 The RSA user key segment 1.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.2
sshUserRsaKey2 The RSA user key segment 2.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.3
sshUserRsaKey3 The RSA user key segment 3.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.4
sshUserRsaKey4 The RSA user key segment 4.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.5
sshUserRsaKey5 The RSA user key segment 5.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.6
sshUserRsaKey6 The RSA user key segment 6.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.7
sshUserRsaKey7 The RSA user key segment 7.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.8
sshUserRsaKey8 The RSA user key segment 8.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.9
sshUserDsaKey1 The DSA user key segment 1.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.10
sshUserDsaKey2 The DSA user key segment 2.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.11
sshUserDsaKey3 The DSA user key segment 3.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.12
sshUserDsaKey4 The DSA user key segment 4.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.13
sshUserDsaKey5 The DSA user key segment 5.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.14
sshUserDsaKey6 The DSA user key segment 6.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.15
sshUserDsaKey7 The DSA user key segment 7.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.16
sshUserDsaKey8 The DSA user key segment 8.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.17
sshUserKeyDelAction To delete the user key. For the set behavior: Set it to delRsaKey(2) to delete the RSA user key, to delDsaKey(3) to delete the DSA user key, or to delBothKeys(4) to delete both RSA and DSA user key. …	Enumerationr/w Enumerated Values: 1 noDel 2 delRsaKey 3 delDsaKey 4 delBothKeys	.1.3.6.1.4.1.248.13.7.4.1.17.6.29.1.18

The conceptual table of all of aclIpAceEntry.

aclIpAceEntry row .1.3.6.1.4.1.248.13.7.4.1.17.7.1.1

The conceptual row for aclIpAceTable.

Indexes

aclIpAceName aclIpAceIndex

Column	Syntax	OID
aclIpAceName The name of an ACL. Within a feature a unique name is used to identify the list to which the entry belongs in the device.	OctetString Constraints: range: 1-15	.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.1
aclIpAceIndex The unique index of an ACE within an ACL.	Integer32 Constraints: range: 1-32	.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.2
aclIpAcePrecedence Specifies the IP precedence value to be matched against. This object cannot not be configured when the status of the entry, aclIpAceStatus, is active(1).	Integer32 Constraints: range: 0-32	.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.3
aclIpAceAction Indicates the action to be taken if a packet matches this ACE. This object cannot not be configured when the status of the entry, aclIpAceStatus, is active(1).	Enumerationr/w Enumerated Values: 1 permit 2 deny	.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.4
aclIpAceSourceIpAddr The specified source IP address. The packet's source address is AND-ed with the value of aclIpAceSourceIpAddrBitmask and then compared against the value of this object. This object cannot be conf…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.5
aclIpAceSourceIpAddrBitmask The specified source IP address mask. The packet's destination address is AND-ed with the value of aclIpAceSourceIpAddr and then compared against the value of this object.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.6
aclIpAceDestIpAddr The specified destination IP address. The packet's destination address is AND-ed with the value of aclIpAceDestIpAddrBitmask and then compared against the value of this object.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.7
aclIpAceDestIpAddrBitmask The specified destination IP address mask.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.8
aclIpAceProtocol The protocol number field in the IP header used to indicate the higher layer protocol as specified in RFC 1700. A value value of 0 matches every IP packet. The object=256, means 'any' For exam…	Integer32r/w Constraints: range: 0-256	.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.9
aclIpAcePrec Specifies the IP precedence value to be matched against. This object cannot be configured when the status of the entry, aclIpAceStatus, is active(1). The value of this object is ignored whenever the value of aclIpAcePre…	Integer32r/w Constraints: range: 0-8	.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.10
aclIpAceTos Specifies the IP ToS facility value to be matched against. This object cannot be configured when the status of the entry, aclIpAceStatus, is active(1). The value of this object is ignored whenever the value of aclIpAceP…	Integer32r/w Constraints: range: 0-16	.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.11
aclIpAceDscp Specifies the DSCP value to be matched against. This object cannot be configured when the status of the entry, aclIpAceStatus, is active(1). The value of this object is ignored whenever the value of aclIpAcePrec object …	Integer32r/w Constraints: range: 0-64	.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.12
aclIpAceSourcePortOp Indicates how a packet's source TCP/UDP port number is to be compared. noOperator(1), which is the default value, means no comparison is to be made with the source TCP/UDP port number.	Enumerationr/w Enumerated Values: 1 noOperator 2 equal 3 range	.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.13
aclIpAceMinSourcePort If the aclIpAceSourcePortOp is range(3), this indicates the lower bound of the TCP/UDP port number value range.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.14
aclIpAceMaxSourcePort If the aclIpAceSourcePortOp is range(3), this indicates the upper bound of the TCP/UDP port number value range.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.15
aclIpAceSourcePortBitmask If the aclIpAceSourcePortOp is equal(2), this indicates the bitmask of the aclIpAceMinSourcePort.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.16
aclIpAceDestPortOp Indicates how a packet's destination TCP/UDP port number is to be compared. noOperator(1), which is the default value, means that no comparison is to be made with the destination TCP/UDP port number.	Enumerationr/w Enumerated Values: 1 noOperator 2 equal 3 range	.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.17
aclIpAceMinDestPort If the aclIpAceDestPortOp is range(3), this indicates the lower bound of the TCP/UDP port number value range.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.18
aclIpAceMaxDestPort If the aclIpAceDestPortOp is range(3), this indicates the upper bound of the TCP/UDP port number value range.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.19
aclIpAceDestPortBitmask If the aclIpAceDestPortOp is equal(2), this indicates the bitmask of the aclIpAceMinDestPort.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.20
aclIpAceControlCode Indicates how the control flags of TCP packets are to be compared. aceIpControlCode is AND-ed with aceIpControlCodeBitmask.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.21
aclIpAceControlCodeBitmask Indicates how the control flags of TCP packets are to be compared. It can be used to check multiple flags of the FIN, SYN, RST, PSH, ACK, URG by the sum of FIN=1, SYN=2, RST=4, PSH=8, ACK=16, URG=32.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.22
aclIpAceStatus The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicate…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.248.13.7.4.1.17.7.1.1.23

The conceptual table of all of aclMacAceEntry.

aclMacAceEntry row .1.3.6.1.4.1.248.13.7.4.1.17.7.2.1

The conceptual row for aclMacAceTable.

Indexes

aclMacAceName aclMacAceIndex

Column	Syntax	OID
aclMacAceName The name of an ACL. Within a feature, a unique name is used to identify the list to which the entry belongs in the device.	OctetString Constraints: range: 1-15	.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.1
aclMacAceIndex The unique index of an ACE within an ACL.	Integer32 Constraints: range: 1-32	.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.2
aclMacAcePrecedence Specifies the entry's precedence.	Integer32 Constraints: range: 0-32	.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.3
aclMacAceAction Indicates the action to be taken if a packet matches this ACE. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1).	Enumerationr/w Enumerated Values: 1 permit 2 deny	.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.4
aclMacAcePktformat Used to check the packet format of the packets. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1).	Enumerationr/w Enumerated Values: 1 any 2 untagged-Eth2 3 untagged802Dot3 4 tagggedEth2 5 tagged802Dot3	.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.5
aclMacAceSourceMacAddr Indicates the 48-bit destination MAC address. The specified source MAC of the packet The packet's source MAC address is AND-ed with the value of aceMacSourceMacAddrBitmask and then compared against the value of this obj…	OctetStringr/w Constraints: range: 6-6	.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.6
aclMacAceSourceMacAddrBitmask The specified source MAC address mask. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1).	OctetStringr/w Constraints: range: 6-6	.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.7
aclMacAceDestMacAddr Indicates the 48-bit destination MAC address. The specified destination MAC of the packet. The packet's destination MAC address is AND-ed with the value of aceMacDestMacAddrBitmask and then compared against the value of…	OctetStringr/w Constraints: range: 6-6	.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.8
aclMacAceDestMacAddrBitmask The specified destination MAC address mask. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1).	OctetStringr/w Constraints: range: 6-6	.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.9
aclMacAceVidOp Indicates how a packet's vid is to be compared. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1).	Enumerationr/w Enumerated Values: 1 noOperator 2 equal 3 range	.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.10
aclMacAceMinVid Indicates the lower bound of the vid value range if the aclMacAceVidOp is range(3). This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1).	Integer32r/w Constraints: range: 1-4093	.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.11
aclMacAceVidBitmask The bitmask of vid if the aclMacAceVidOp is equal, default value is 0xfff.	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.12
aclMacAceMaxVid Indicates the upper bound of the vid value range if the aclMacAceVidOp is range(3). This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1).	Integer32r/w Constraints: range: 1-4093	.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.13
aclMacAceEtherTypeOp Indicates how a packet's ethertype is to be compared. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1).	Enumerationr/w Enumerated Values: 1 noOperator 2 equal 3 range	.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.14
aclMacAceEtherTypeBitmask The bitmask of vid if the aclMacAceVidOp is equal(2) , default value is 0xFFFF.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.15
aclMacAceMinEtherType Indicates the lower bound of the vid value range if the aclMacAceEtherTypeOp is range(3). This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1).	Integer32r/w Constraints: range: 1536-65535	.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.16
aclMacAceMaxEtherType Indicates the upper bound of the vid value range if the aclMacAceEtherTypeOp is range(3). This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1).	Integer32r/w Constraints: range: 1536-65535	.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.17
aclMacAceStatus The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicate…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.248.13.7.4.1.17.7.2.1.18