hwApFaultTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.1 | The object indicates an AP communication fault alarm. |
hwApMemoryOverloadRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.10 | This object indicates that the memory usage of an AP restores to the allowed range. |
hwApSoftGreDownTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.100 | This alarm is generated when the softgre tunnel down. |
hwApSoftGreDownTrapRestore
| .1.3.6.1.4.1.2011.6.139.13.1.1.101 | This alarm is generated when the softgre tunnel up. |
hwApVersionNotRecommendedTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.102 | The AP version is not recommended for the current AC. |
hwApVersionNotRecommendedTrapRestore
| .1.3.6.1.4.1.2011.6.139.13.1.1.103 | AP-version-not-recommended alarm restore |
hwApDiskOverloadTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.104 | The Disk usage of an AP exceeds the upper threshold. |
hwApDiskOverloadRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.105 | The Disk usage of an AP restores to the allowed range. |
hwApPowerLimitedTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.106 | This alarm is generated when the AP works in Limited mode due to insufficient power supply. |
hwApPowerLimitedResumeTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.107 | This alarm is generated when the AP resumes from the Limited mode. |
hwAPIPConflictTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.108 | The IP address of the AP conflicts with that of the gateway or another AP. |
hwApNumReachMaxTrap | .1.3.6.1.4.1.2011.6.139.13.1.1.109 | This alarm is generated when the number of online APs reaches the maximum specifications. |
hwApStaFullTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.11 | This object indicates that new STAs cannot associate with an AP. |
hwApNumReachMaxResumeTrap | .1.3.6.1.4.1.2011.6.139.13.1.1.110 | This alarm is generated when the number of online APs is less than the maximum specifications. |
hwApNumReachWarningTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.111 | The number of online APs reaches 80% of the maximum specifications. |
hwApNumReachWarningResumeTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.112 | The number of online APs is less than 80% of the maximum specifications. |
hwAPIotCardConnectServerTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.113 | This alarm is generated when an IOT card of the AP is connected to the server. |
hwAPIotCardDisconnectServerTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.114 | This alarm is generated when an IOT card of the AP is disconnected from the server. |
hwAPIotCardTypeMatchTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.115 | This alarm is generated when an IOT card of the AP is match with configuration. |
hwAPIotCardTypeMismatchTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.116 | This alarm is generated when an IOT card of the AP is mismatch with configuration. |
hwAPFanRemoveTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.117 | This alarm is generated when the fan of the AP is removed. |
hwAPFanInsertTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.118 | This alarm is generated when the fan of the AP is inserted. |
hwAPPowerRemoveTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.119 | This alarm is generated when the power of the AP is removed. |
hwApStaFullRecoverTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.12 | This object indicates that new STAs can associate with an AP. |
hwAPPowerInsertTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.120 | This alarm is generated when the power of the AP is inserted. |
hwAPPowerFailTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.121 | This alarm is generated when the power of the AP is faulty. |
hwAPPowerFailResumeTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.122 | This alarm is generated when the power of the AP resume from failure. |
hwAPPowerInvalidTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.123 | This alarm is generated when the AP power is invalid for some reason. |
hwAPPowerInvalidResumeTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.124 | This alarm is generated when the AP power resume from invalid situation. |
hwApExistNeedReconnectTrap | .1.3.6.1.4.1.2011.6.139.13.1.1.125 | This alarm is generated when some APs need to be reconnected. |
hwApExistNeedReconnectResumeTrap | .1.3.6.1.4.1.2011.6.139.13.1.1.126 | This alarm is generated when no AP needs to be reconnected. |
hwApOpticalVoltageTooHighTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.127 | This object indicates that the Voltage of an AP's optical module is too High. |
hwApOpticalVoltageTooHighRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.128 | This object indicates that the Voltage of an AP's optical module restores to the normal range. |
hwApOpticalVoltageTooLowTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.129 | This object indicates that the Voltage of an AP's optical module is too low. |
hwAcDevicesSwitchTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.13 | This object that an active/standby AC switchover occurs. |
hwApOpticalVoltageTooLowRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.130 | This object indicates that the Voltage of an AP's optical module restores to the normal range. |
hwApOpticalCurrentTooHighTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.131 | This object indicates that the Current of an AP's optical module is too high. |
hwApOpticalCurrentTooHighRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.132 | This object indicates that the Current of an AP's optical module restores to the normal range. |
hwApOpticalCurrentTooLowTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.133 | This object indicates that Current of an AP's optical module is too low. |
hwApOpticalCurrentTooLowRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.134 | This object indicates that the Current of an AP's optical module restores to the normal range. |
hwApLoopbackDetectTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.135 | This object indicates that the wired port detected a loop and blocked itself. |
hwApLoopbackDetectRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.136 | This object indicates that the blocked port has recovered. |
hwApServiceInterruptAlertTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.137 | This alarm will be generated when the AP service is unavailable after a period of time. |
hwApServiceInterruptAlertResumeTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.138 | This alarm will be generated when the AP service is available. |
hwApRTUDemoLicenseExpireTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.139 | This alarm will be generated when the AP RTU license is near deadline. |
hwDyingGaspTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.14 | This object indicates a dying gasp alarm. |
hwApTypeInfoInconsistentTrap | .1.3.6.1.4.1.2011.6.139.13.1.1.140 | This alarm is generated when APs of the same type report different AP type attributes. |
hwApCPETunnelSpecFullTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.141 | This alarm is generated when reached the maximum number of CPE tunnels on the AP. |
hwApCPETunnelSpecFullRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.142 | This alarm is generated when the number of CPE tunnels on the AP falls below the maximum value. |
hwApEMDISessionOverloadTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.143 | This alarm is generated when the eMDI session usage on the AP is high. |
hwApEMDISessionOverloadRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.144 | Cleared the alarm of high eMDI session usage on the AP. |
hwApSipfpmFlowOverloadTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.145 | This alarm is generated when the iPCA flow usage on the AP is high. |
hwApSipfpmFlowOverloadRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.146 | Cleared the alarm of high iPCA flow usage on the AP. |
hwApSACSessionOverloadTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.147 | This alarm is generated when the SAC session usage on the AP is high. |
hwApSACSessionOverloadRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.148 | Cleared the alarm of high SAC session usage on the AP. |
hwWlanApPKICACertNearlyExpiredTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.149 | This alarm is generated when the CA certificate is nearly expired. |
hwApFaultTrapFat
| .1.3.6.1.4.1.2011.6.139.13.1.1.15 | Description. |
hwWlanApPKILocalCertNearlyExpiredTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.150 | This alarm is generated when the Local certificate is nearly expired. |
hwApPortRateAutoNegotiationEventTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.151 | This object indicates the auto-negotiation rate of the AP port changes. . |
hwApNormalTrapFat
| .1.3.6.1.4.1.2011.6.139.13.1.1.16 | Description. |
hwApTemperatureTooLowTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.17 | This object indicates that the temperature is too low. |
hwApTemperatureTooLowRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.18 | This object indicates that the temperature restores to the normal range. |
hwApTemperatureTooHighTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.19 | This object indicates that the temperature is too high. |
hwApNormalTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.2 | This object indicates an AP communication fault clear alarm. |
hwApTemperatureTooHighRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.20 | This object indicates that the temperature restores to the normal range. |
hwApOpticalRxPowerTooHighTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.21 | This object indicates that the receive power of an AP's optical module is too high. |
hwApOpticalRxPowerTooHighRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.22 | This object indicates that the receive power of an AP's optical module restores to the normal range. |
hwApOpticalRxPowerTooLowTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.23 | This object indicates that the receive power of an AP's optical module is too low. |
hwApOpticalRxPowerTooLowRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.24 | This object indicates that the receive power of an AP's optical module restores to the normal range. |
hwApOpticalTemperatureTooHighTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.25 | This object indicates that the temperature of an AP's optical module is too high. |
hwApOpticalTemperatureTooHighRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.26 | This object indicates that the temperature of an AP's optical module restores to the normal range. |
hwApOpticalTemperatureTooLowTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.27 | This object indicates that the temperature of an AP's optical module is too low. |
hwApOpticalTemperatureTooLowRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.28 | This object indicates that the temperature of an AP's optical module restores to the normal range. |
hwApNotSupportCountryCodeTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.29 | This object indicates that the country code is not supported. |
hwApPingResultTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.3 | This object indicates an AP ping result alarm. |
hwApColdBootTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.30 | This object indicates a cold restart alarm. |
hwApColdBootRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.31 | This object indicates a cold restart clear alarm. |
hwApHotBootTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.32 | This object indicates a hot restart alarm. |
hwApHotBootRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.33 | This object indicates a hot restart clear alarm. |
hwApCRCTooHighTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.34 | This object indicates a CRC error alarm. |
hwApCRCTooHighRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.35 | This object indicates that CRC error alarms are cleared. |
hwApConflictApNameTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.36 | This object indicates an alarm of AP name conflict. |
hwApLicenseTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.37 | This object indicates an AP license resource exhaustion alarm. |
hwApFmeaIICFaultTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.38 | This object indicates an FMEA IIC fault alarm. |
hwApFmeaIICFaultRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.39 | This object indicates that the FMEA IIC fault alarm is cleared. |
hwApConfigCommitTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.4 | This object indicates that the configuration of an AP is successfully committed. |
hwApFmeaPHYFaultTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.40 | This object indicates an FMEA PHY fault alarm. |
hwApFmeaPHYFaultRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.41 | This object indicates that the FMEA PHY fault alarm is cleared. |
hwApFmeaFaultTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.42 | This object indicates an FMEA fault alarm. |
hwApFmeaFaultRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.43 | This object indicates that the FMEA fault alarm is cleared. |
hwApOpticalInsertTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.44 | This object indicates an alarm that is generated when an optical module is installed. |
hwApOpticalRemoveTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.45 | This object indicates an alarm generated due to installation of an optical module is cleared. |
hwApReceivedInvalidArpNewTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.46 | This object indicates that invalid ARP packets are received. |
hwApVersionMismatchTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.47 | This object indicates that the AP version and the AC version do not match. |
hwRadioUploadRemoteCaptureFileTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.48 | This object indicates the alarm on the remote capture result upload result. |
hwMPJoinedOnEthernetTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.49 | This object indicates the alarm when an MP goes online through an Ethernet interface. |
hwUnAuthorizedApRecordExistTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.5 | This object indicates that unauthorized AP alarms exist. |
hwMPJoinedOnEthernetRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.50 | This object indicates the alarm when an MP that went online through an Ethernet interface goes online through an air interface. |
hwMPPJoinedOnAirTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.51 | This object indicates the alarm when an MPP changes to an MP and goes online through an air interface. |
hwMPPJoinedOnAirRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.52 | This object indicates the alarm when an MPP that went online through an air interface goes online through an Ethernet interface. |
hwApOpticalTxPowerTooHighTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.53 | This object indicates an alarm for high transmit power of the AP's optical module. |
hwApOpticalTxPowerTooHighRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.54 | This object indicates a clear alarm for transmit power recovery of the AP's optical module. |
hwApOpticalTxPowerTooLowTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.55 | This object indicates an alarm for low transmit power of the AP's optical module. |
hwApOpticalTxPowerTooLowRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.56 | This object indicates a clear alarm for transmit power recovery of the AP's optical module. |
hwApOnLineNumExceedCardSpecTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.57 | This object indicates the number of online APs on the card has exceeded the maximum value. |
hwApFanInvalidTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.58 | This object indicates a complete failure of a fan. |
hwApFanInvalidRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.59 | This object indicates that the complete failure of a fan has been rectified. |
hwUnAuthorizedApRecordClearTrap | .1.3.6.1.4.1.2011.6.139.13.1.1.6 | This object indicates that unauthorized AP alarms are cleared. |
hwApStorageDevRemoveTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.60 | This object indicates that the storage card is removed. |
hwApStorageDevInsertTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.61 | This object indicates that the storage card is installed. |
hwApPoePowerOffTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.62 | This object indicates that a port is powered off. |
hwApPoePowerOnTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.63 | This object indicates that a port is powered on. |
hwApPoePdConnectedTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.64 | This object indicates that a port detects a PD connected to it. |
hwApPoePdDisconnectedTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.65 | This object indicates that a port detects disconnection of the attached PD. |
hwApPoePdClassOvercurrentTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.66 | This object indicates that a port detects a PD whose current exceeds the threshold of the corresponding class. |
hwApPoePdPriorityDifferentTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.67 | This object indicates that the priority configured on a port is different from the PD priority. |
hwApPoePowerOverUtilizationThresholdTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.68 | This object indicates that the load power of a PoE slot exceeds the upper limit. |
hwApPoePowerOverUtilizationThresholdRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.69 | This object indicates that the load power of a PoE slot has fallen below the upper limit. |
hwApCpuOverloadTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.7 | This object indicates that the CPU usage of an AP exceeds the upper threshold. |
hwApSTPAutoShutdownTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.70 | This object indicates that STP detected a loop and shut down the port based on configuration. |
hwApSTPAutoShutdownRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.71 | This object indicates that the shutdown port has recovered. |
hwApOpticalInvalidTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.72 | This object indicates that the optical transceiver does not work normally. |
hwApOpticalInvalidRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.73 | This object indicates that the optical transceiver has restored. |
hwApVapStaFullTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.74 | This object indicates that new STAs cannot associate with an VAP. |
hwVapStaFullRecoverTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.75 | This object indicates that new STAs can associate with an VAP. |
hwWlanBLELowPowerTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.76 | This object indicates that the battery power of a BLE device is lower than the specified low power alarm threshold. |
hwWlanBLELowPowerRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.77 | This object indicates that the low power alarm of a BLE device has been cleared. |
hwWlanBLEOfflineTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.78 | This object indicates that a BLE device gets offline. |
hwWlanBLEOfflineRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.79 | This object indicates that an offline alarm of a BLE device has been cleared. |
hwApCpuOverloadRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.8 | This object indicates that an AP's CPU usage restores to the allowed range. |
hwWlanBLEFaultyTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.80 | This object indicates that an AP's built-in Bluetooth module is faulty. |
hwWlanBLEFaultyRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.81 | This object indicates that the fault on an AP's built-in Bluetooth module fault alarm is cleared. |
hwAPIoTCardInsertTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.82 | This object indicates that an IoT card is inserted. |
hwAPIoTCardRemoveTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.83 | This object indicates that an IoT card is removed. |
hwAPIoTServerStartFailTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.84 | This object indicates that the server module on an AP for receiving data from the IoT card fails to start. |
hwAPIoTServerStartFailResumeTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.85 | This object indicates that the server used by the IoT card is successfully recovered. |
hwWlanApSubFirmwareMismatchTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.86 | This object indicates the mismatch alarm for the sub-firmware version on the AP. |
hwApSpecificConfigChangedTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.87 | Description. |
hwApConfigInconsistWithActualTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.88 | This alarm is generated when a the AP config is inconsistent with the actual attribute. |
hwWlanBLEDetachedTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.89 | This object indicates an alarm showing that a Bluetooth tag is detached. |
hwApMemoryOverloadTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.9 | This object indicates that the memory usage of an AP exceeds the upper threshold. |
hwWlanBLEDetachedRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.90 | This object indicates an alarm showing that a Bluetooth tag is re-attached. |
hwWlanCableSnrNormalTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.91 | This alarm is generated when the AP's current network cable quality is good. |
hwWlanCableSnrAbnormalTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.92 | This alarm is generated when the AP's current network cable quality is poor, causing packet loss risks. |
hwWlanCableSnrDetectNotSupportTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.93 | This alarm is generated when the AP's port is Down, resulting in a failure to detect the network cable quality. |
hwApPowerInsufficientTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.94 | This alarm is generated when the AP power supply is insufficient. |
hwApPowerInsufficientResumeTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.95 | This alarm is generated when the AP power supply insufficient resume. |
hwPortVlanSecureMacTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.96 | This alarm is generated when the AP's port receive illegal MAC. |
hwApMcBcPktNumExceedTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.97 | This alarm is generated when the AP broadcast and multicast packets over threshold. |
hwApMcBcPktNumExceedRestoreTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.98 | This alarm is generated when the AP broadcast and multicast packets over threshold restore. |
hwApTypeMismatchTrap
| .1.3.6.1.4.1.2011.6.139.13.1.1.99 | This object indicates that the AP version and the AC version do not match. |
hwWlanWceChangeStatusApOnlineTrap
| .1.3.6.1.4.1.2011.6.139.13.3.14.1.1 | This alarm is generated when the AP is online. |
hwWlanWceChangeStatusApOfflineTrap
| .1.3.6.1.4.1.2011.6.139.13.3.14.1.2 | This alarm is generated when the AP is offline. |