HUAWEI-VRRP-EXT-MIB Table View

The VRRP tracking interface table, it can accomodate eight rows at most.

hwVrrpTrackInterEntry row .1.3.6.1.4.1.2011.5.25.127.2.1.1

An entry in the VRRP tracking interface table.

Indexes

hwVrrpTrackInterVRID hwVrrpTrackInterStandByIfnet hwVrrpTrackInterIfnet

Column	Syntax	OID
hwVrrpTrackInterVRID The index of the VRRP tracking interface table, it identifies the standby's ID.	VRRP-MIBVrId Type Constraints: range: 1..255	.1.3.6.1.4.1.2011.5.25.127.2.1.1.1
hwVrrpTrackInterStandByIfnet The index of the VRRP tracking interface table, it identifies the standby's interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.127.2.1.1.2
hwVrrpTrackInterIfnet The index of the VRRP tracking interface table, it identifies the tracked interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.127.2.1.1.3
hwVrrpTrackInterPriReduce If the tracked interface is down, priority of standby will reduce this value. '0' specifies this attribute hasn't been configured. The minimum availability value is '1'.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.5.25.127.2.1.1.4
hwVrrpTrackInterOperRowStatus The row status variable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.127.2.1.1.5
hwVrrpTrackInterPriIncrease If the tracked interface is down, this value will be added to the priority of standby. '0' specifies this attribute hasn't been configured. The minimum availability value is '1'.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.5.25.127.2.1.1.6

The VRRP tracking BFD table, it can append eight rows at most.

hwVrrpTrackBfdEntry row .1.3.6.1.4.1.2011.5.25.127.2.2.1

An entry in the VRRP tracking BFD table.

Indexes

hwVrrpTrackInterVRID hwVrrpTrackInterStandByIfnet hwVrrpTrackBfdId

Column	Syntax	OID
hwVrrpTrackBfdId The index of the table, it only identifies BFD link.	Integer32 Constraints: range: 1-16383	.1.3.6.1.4.1.2011.5.25.127.2.2.1.1
hwVrrpTrackBfdPriReduce If the tracked BFD is down, the priority of standby will reduce this value. '0' specifies this attribute hasn't been configured. The minimum availability value is '1'.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.5.25.127.2.2.1.2
hwVrrpTrackBfdOperRowStatus The row status variable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.127.2.2.1.3
hwVrrpTrackBfdPriIncrease If the tracked BFD is down, this value will be added to the priority of standby. '0' specifies this attribute hasn't been configured. The minimum availability value is '1'.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.5.25.127.2.2.1.4
hwVrrpTrackBfdType The bfd type that vrrp tracks,including Normal, Link, Peer. The attribute cannot be modified after created.	Enumerationr/w Enumerated Values: 1 link 2 peer 3 normal	.1.3.6.1.4.1.2011.5.25.127.2.2.1.5
hwVrrpTrackBfdName The bfd name that vrrp tracks. The attribute cannot be modified after created.	OctetString Constraints: range: 1-15	.1.3.6.1.4.1.2011.5.25.127.2.2.1.6

The admin-vrrp's configure table.

hwAdminVrrpCfgEntry row .1.3.6.1.4.1.2011.5.25.127.2.3.1

The admin-vrrp's configure entry.

Indexes

hwAdminVrrpCfgIfIndex hwAdminVrrpCfgVRID

Column	Syntax	OID
hwAdminVrrpCfgIfIndex The admin-vrrp's configure interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.127.2.3.1.1
hwAdminVrrpCfgVRID The admin-vrrp's configure VRID.	VRRP-MIBVrId Type Constraints: range: 1..255	.1.3.6.1.4.1.2011.5.25.127.2.3.1.2
hwAdminVrrpCfgOperRowStatus The row status variable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.127.2.3.1.3
hwAdminVrrpCfgIgnoreIfDownMode The mode of ignore interface down.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.127.2.3.1.4

The member-vrrp's configure table.

hwAdminVrrpMemberEntry row .1.3.6.1.4.1.2011.5.25.127.2.4.1

The admin-vrrp's configure entry.

Indexes

hwAdminVrrpCfgIfIndex hwAdminVrrpCfgVRID hwAdminVrrpMemberIfIndex hwAdminVrrpMemberVRID

Column	Syntax	OID
hwAdminVrrpMemberIfIndex The admin-vrrp's member interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.127.2.4.1.1
hwAdminVrrpMemberVRID The admin-vrrp's member VRID.	VRRP-MIBVrId Type Constraints: range: 1..255	.1.3.6.1.4.1.2011.5.25.127.2.4.1.2
hwAdminVrrpMemberDiscardPkts The admin-vrrp's member discarded packets.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.127.2.4.1.3
hwAdminVrrpMemberOperRowStatus The row status variable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.127.2.4.1.4
hwAdminVrrpMemberFlowdownMode The mode of flowdown interface.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.127.2.4.1.5

The vrrp statistics reset Table.

hwVrrpStatResetEntry row .1.3.6.1.4.1.2011.5.25.127.2.5.1

The vrrp statistics reset entry.

Indexes

hwVrrpStatResetIfIndex hwVrrpStatResetVRID

Column	Syntax	OID
hwVrrpStatResetIfIndex The vrrp's configure interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.127.2.5.1.1
hwVrrpStatResetVRID The vrrp vrid.	VRRP-MIBVrId Type Constraints: range: 1..255	.1.3.6.1.4.1.2011.5.25.127.2.5.1.2
hwVrrpStatResetFlag A reset signal of vrrp statistics.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.25.127.2.5.1.3

The interface bound to VRRP table.

hwAdminVrrpTrackIfEntry row .1.3.6.1.4.1.2011.5.25.127.2.6.1

Entries of the interface bound to VRRP table.

Indexes

hwAdminVrrpTrackIfIndex

Column	Syntax	OID
hwAdminVrrpTrackIfIndex The number of the interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.127.2.6.1.1
hwAdminVrrpIfIndex The administrator VRRP's configure interface index.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.127.2.6.1.2
hwAdminVrrpVrid The administrator VRRP vrid.	VRRP-MIBVrIdr/w Type Constraints: range: 1..255	.1.3.6.1.4.1.2011.5.25.127.2.6.1.3
hwAdminVrrpTrackIfRowStatus Current operation status of the row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.127.2.6.1.4

The VRRP tracking EFM table.

hwVrrpTrackEfmEntry row .1.3.6.1.4.1.2011.5.25.127.2.7.1

An entry in the VRRP tracking EFM table.

Indexes

hwVrrpTrackEfmIfIndex hwVrrpTrackEfmVRID hwVrrpTrackEfmIndex

Column	Syntax	OID
hwVrrpTrackEfmIfIndex The index of the table, it identifies vrrp's interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.127.2.7.1.1
hwVrrpTrackEfmIfName A textual string containing information about the interface of vrrp.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2011.5.25.127.2.7.1.2
hwVrrpTrackEfmVRID The index of the table, it identifies vrrp's vrid.	VRRP-MIBVrId Type Constraints: range: 1..255	.1.3.6.1.4.1.2011.5.25.127.2.7.1.3
hwVrrpTrackEfmIndex The index of the table, it identifies EFM's interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.127.2.7.1.4
hwVrrpTrackEfmName A textual string containing information about the interface of efm.	OctetString Constraints: range: 1-255	.1.3.6.1.4.1.2011.5.25.127.2.7.1.5
hwVrrpTrackEfmOperRowStatus The row status variable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.127.2.7.1.6

The VRRP trigger route table.

hwVrrpTriggerRouteEntry row .1.3.6.1.4.1.2011.5.25.127.2.8.1

An entry in the VRRP trigger route table.

Indexes

hwVrrpTriggerRouteIfIndex

Column	Syntax	OID
hwVrrpTriggerRouteIfIndex The index of the table, it identifies vrrp's interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.127.2.8.1.1
hwVrrpTriggerRouteMode A switch decides whether the system responds to a request message or not, which is sent to virtual ip address.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.25.127.2.8.1.2
hwVrrpTriggerRouteOperRowStatus The row status variable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.127.2.8.1.51

The VRRP configure table.

hwVrrpCfgEntry row .1.3.6.1.4.1.2011.5.25.127.2.9.1

An entry in the VRRP configure route table.

Indexes

hwVrrpCfgIfIndex hwVrrpCfgVrId

Column	Syntax	OID
hwVrrpCfgIfIndex The index of the table, it identifies vrrp's interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.127.2.9.1.1
hwVrrpCfgVrId The vrrp vrid.	VRRP-MIBVrId Type Constraints: range: 1..255	.1.3.6.1.4.1.2011.5.25.127.2.9.1.2
hwVrrpCfgLinkBfdDownNumber The state of link BFD will really down when reach the configured down number. Enter '0' to delete this configuration.	Integer32r/w Constraints: range: 0-8	.1.3.6.1.4.1.2011.5.25.127.2.9.1.3
hwVrrpCfgMsecAdvInterval The value of VRRP advertise interval in milliseconds, when the interval is less than 1 second, otherwise it should be set or got in VRRP-MIB. when the advertise interval is equal to or larger than 1 second, this value w…	Integer32r/w Constraints: range: 100-999	.1.3.6.1.4.1.2011.5.25.127.2.9.1.4
hwVrrpExpectState Expected state of VRRP. Used by hwVrrpExtTrapExpectStateChange trap and hwVrrpExtTrapExpectStateResume trap.	Enumeration Enumerated Values: 2 backup 3 master	.1.3.6.1.4.1.2011.5.25.127.2.9.1.5
hwVrrpCfgFastResumeFlag A switch indicates whether the VRRP fast-resume function is enabled.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.127.2.9.1.50
hwVrrpCfgOperRowStatus The row status variable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.127.2.9.1.51

The VRRP statistics extend table.

hwVrrpStatExtEntry row .1.3.6.1.4.1.2011.5.25.127.2.10.1

An entry in The VRRP statistics extend table.

Indexes

hwVrrpStatExtIfIndex hwVrrpStatExtVRID

Column	Syntax	OID
hwVrrpStatExtIfIndex The index of the table, it identifies vrrp's interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.127.2.10.1.1
hwVrrpStatExtVRID The vrrp vrid.	VRRP-MIBVrId Type Constraints: range: 1..255	.1.3.6.1.4.1.2011.5.25.127.2.10.1.2
hwVrrpStatExtBecomeBackup The total number of times that this virtual router's state has transitioned to BACKUP.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.127.2.10.1.3
hwVrrpStatExtBecomeInit The total number of times that this virtual router's state has transitioned to INITIALIZE.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.127.2.10.1.4
hwVrrpStatExtCreateTime The create time of vrrp.	OctetString Constraints: range: 1-40	.1.3.6.1.4.1.2011.5.25.127.2.10.1.5
hwVrrpStatExtLastChangeTime The last change time of vrrp.	OctetString Constraints: range: 1-40	.1.3.6.1.4.1.2011.5.25.127.2.10.1.6

This object indicates the VRRP tracking Ipsec-instance table, which can accommodate a maximum of eight rows.

hwVrrpTrackIpsecInstanceEntry row .1.3.6.1.4.1.2011.5.25.127.2.11.1

This object indicates an entry in the VRRP tracking Ipsec-instance table.

Indexes

hwVrrpTrackIpsecInstanceVRID hwVrrpTrackIpsecInstanceStandByIfnet hwVrrpTrackIpsecInstanceID

Column	Syntax	OID
hwVrrpTrackIpsecInstanceVRID The value of this object identifies the ID of a backup device in the VRRP tracking Ipsec-instance table.	VRRP-MIBVrId Type Constraints: range: 1..255	.1.3.6.1.4.1.2011.5.25.127.2.11.1.1
hwVrrpTrackIpsecInstanceStandByIfnet The value of this object identifies the interface index of a backup device in the VRRP tracking Ipsec-instance table.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.127.2.11.1.2
hwVrrpTrackIpsecInstanceID The value of this object identifies the ID of a tracked Ipsec-instance in the VRRP tracking Ipsec-instance table.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.2011.5.25.127.2.11.1.3
hwVrrpTrackIpsecInstancePriReduce If the tracked Ipsec-instance is Down, priorities of backup devices decrease by the specified value. The value 0 indicates that the attribute is not configured. The minimum value is 1.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.5.25.127.2.11.1.4
hwVrrpTrackIpsecInstanceOperRowStatus This object indicates the row status variable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.127.2.11.1.5

The VRRP tracking NQA table.

hwVrrpTrackNQAEntry row .1.3.6.1.4.1.2011.5.25.127.2.12.1

An entry in the VRRP tracking NQA table.

Indexes

hwVrrpTrackNQAVRID hwVrrpTrackNQAStandbyIfIndex hwVrrpTrackNQAAdminName hwVrrpTrackNQATestName

Column	Syntax	OID
hwVrrpTrackNQAVRID The value of this object identifies the ID of a backup device in the VRRP tracking NQA table.	VRRP-MIBVrId Type Constraints: range: 1..255	.1.3.6.1.4.1.2011.5.25.127.2.12.1.1
hwVrrpTrackNQAStandbyIfIndex The value of this object identifies the interface index of a backup device in the VRRP tracking NQA table.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.127.2.12.1.2
hwVrrpTrackNQAAdminName The NQA administer name that vrrp tracks. The attribute cannot be modified after created.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.2011.5.25.127.2.12.1.3
hwVrrpTrackNQATestName The NQA test name that vrrp tracks. The attribute cannot be modified after created.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.2011.5.25.127.2.12.1.4
hwVrrpTrackNQAPriReduce If the tracked NQA is down, the priority of standby will reduce this value. '0' specifies this attribute hasn't been configured. The minimum availability value is '1'.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.5.25.127.2.12.1.5
hwVrrpTrackNQAOperRowStatus This object indicates the row status variable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.127.2.12.1.6

The VRRP tracking Route table.

hwVrrpTrackRouteEntry row .1.3.6.1.4.1.2011.5.25.127.2.13.1

An entry in the VRRP tracking Route table.

Indexes

hwVrrpTrackRouteIndex hwVrrpTrackRouteVRID hwVrrpTrackRoutePrefix hwVrrpTrackRouteMask hwVrrpTrackRouteVrf

Column	Syntax	OID
hwVrrpTrackRouteVRID The index of the VRRP tracking Route table, it identifies the standby's ID.	VRRP-MIBVrId Type Constraints: range: 1..255	.1.3.6.1.4.1.2011.5.25.127.2.13.1.1
hwVrrpTrackRouteIndex The index of the VRRP tracking Route table, it identifies the standby's interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.127.2.13.1.2
hwVrrpTrackRoutePrefix The index of the VRRP tracking Route table, it identifies the tracked ip address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.127.2.13.1.3
hwVrrpTrackRouteMask The index of the VRRP tracking Route table, it identifies the tracked ip address's mask.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.127.2.13.1.4
hwVrrpTrackRouteVrf The index of the VRRP tracking Route table, it identifies the tracked VPN instance name	OctetString Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.127.2.13.1.5
hwVrrpTrackRoutePriReduce If the tracked route is unreachable, the priority of standby will reduce this value. '0' specifies this attribute hasn't been configured. The minimum availability value is '1'.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.5.25.127.2.13.1.6
hwVrrpTrackRouteOperRowStatus The row status variable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.127.2.13.1.7

Operations table for a Fast-VRRP router which consists of a
sequence (i.e., one or more conceptual rows) of
'hwVrrpFastEntry' items.

hwVrrpFastEntry row .1.3.6.1.4.1.2011.5.25.127.2.14.1

An entry in the hwVrrpFastTable containing the operational
characteristics of a virtual router. On a VRRP router,
a given virtual router is identified by a combination
of the IF index and VRID.

Indexes

IF-MIBifIndex hwVrrpFastVrId

Column	Syntax	OID
hwVrrpFastVrId This object contains the Virtual Router Identifier (VRID).	VRRP-MIBVrId Type Constraints: range: 1..255	.1.3.6.1.4.1.2011.5.25.127.2.14.1.1
hwVrrpFastState The current state of the virtual router. This object has three defined values: - `initialize', which indicates that all the virtual router is waiting for a startup event. -…	Enumeration Enumerated Values: 1 initialize 2 backup 3 master	.1.3.6.1.4.1.2011.5.25.127.2.14.1.2