HUAWEI-VOIP-ONT-MIB Table View

Column Syntax OID

hwVoiceIfIndex

ifIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.36.11.1.1.1

hwVoiceOntIndex

ONT Index

hwVoiceIfIndex hwVoiceOntIndex hwVoiceOntMgId

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.36.11.1.1.2

hwVoiceOntPortIndex

Port in ONT

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.2011.6.36.11.1.1.3

hwLineStatus

hwLineStatus
Options:
1. registering(1) -indicates the port is registering now
2. idle(2) -indicates the port is idle
3. picking(3) -indicates pick up
4. dialing(4) -indicates dialing…

Enumeration

Enumerated Values:

-1	other
1	registering
2	idle
3	picking
4	dialing
5	ringing
6	backringing
7	connecting
8	connected
9	releasing
10	failregister
11	inactive

.1.3.6.1.4.1.2011.6.36.11.1.1.4

hwServiceStatus

Service Status
Options:
1. endLocal(1) -indicates end service at local,occured by disable users
2. endRemote(2) -indicates end service at other side,occured by MGC send out commands
3. endAuto(3) -indicates auto end…

Enumeration

Enumerated Values:

-1	other
1	endLocal
2	endRemote
3	endAuto
4	normal

.1.3.6.1.4.1.2011.6.36.11.1.1.5

hwPortCodec

Ont Pstn Port Codec
Options:
1.g711a(1) -indicates the codec mode is G.711A
2.g729(2) -indicates the codec mode is g729
3.g711u(3) -indicates the codec mode is G.711U
4.g723(4) -indicates the codec mode is g723
…

Enumeration

Enumerated Values:

-1	other
1	g711a
2	g729
3	g711u
4	g723
5	g726
6	t38

.1.3.6.1.4.1.2011.6.36.11.1.1.6

hwMgStatusTable

table

.1.3.6.1.4.1.2011.6.36.11.2 · 1 row entry · 2 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwMgStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-ONT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-ONT-MIB::hwMgStatusTable'

The Mg states table ,for Mib display only
The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntMgId

hwMgStatusEntry row .1.3.6.1.4.1.2011.6.36.11.2.1

The Mg states table ,for Mib display only
The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntMgId

Indexes

Column Syntax OID

hwVoiceOntMgId

MgId in ONT

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.36.11.2.1.1

hwMgStatus

Mg Status.
Options:
1.registering(1) -indicates the mg status is registering.
2.registerok(2) -indicates the mg status is register sucessfully
3.malfunction(3) -indicates the mg status is malfunction
4.logout(4) …

Enumeration

Enumerated Values:

-1	other
1	registering
2	registerok
3	malfunction
4	logout
5	rebooting
255	protocolincorrect

.1.3.6.1.4.1.2011.6.36.11.2.1.2

hwOntPotsTemplateTable

table

.1.3.6.1.4.1.2011.6.36.11.3 · 1 row entry · 8 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwOntPotsTemplateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-ONT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-ONT-MIB::hwOntPotsTemplateTable'

The Table of POTS profile
The index of this table is hwOntPotsTemplateIndex

hwOntPotsTemplateEntry row .1.3.6.1.4.1.2011.6.36.11.3.1

The Table of POTS profile
The index of this entry is hwOntPotsTemplateIndex

Indexes

hwOntPotsTemplateIndex

Column Syntax OID

hwOntPotsTemplateIndex

The Profile ID of POTS profile Table

Integer32

Constraints:
range: -1--1
range: 1-64

.1.3.6.1.4.1.2011.6.36.11.3.1.1

hwOntPotsTemplateName

The Profile Name of POTS profile Table.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.6.36.11.3.1.2

hwOntPotsImpedance

Impedance.
Options:
1 :600 Ohms
2 :900 Ohms
3 :C1=150 nF, R1=750 Ohm, R2=270 Ohm
4 :C1=115 nF, R1=820 Ohm, R2=220 Ohm
5 :C1=230 nF, R1=1050 Ohm, R2=320 Ohm
65 :Bureau …

Integer32r/w

Constraints:
range: 1-76

.1.3.6.1.4.1.2011.6.36.11.3.1.3

hwOntPotsSendGain

param value of sendgain
Options:
1 :-12.0 dB
2 :-11.5 dB
3 :-11.0 dB
4 :-10.5 dB
5 :-10.0 dB
6 :-9.5 dB
7 :-9.0 dB
8 :-8.5 dB
9 :-8.0 dB
10 :-7.5 dB
11 :-7.0 dB
12 :-6.5 dB
13 :-6.0 dB
14 :-5.5 dB
15 :-5.0 dB
…

Integer32r/w

Constraints:
range: 1-37

.1.3.6.1.4.1.2011.6.36.11.3.1.4

hwOntPotsRecvGain

param value of recvgain
Options:
1 :-12.0 dB
2 :-11.5 dB
3 :-11.0 dB
4 :-10.5 dB
5 :-10.0 dB
6 :-9.5 dB
7 :-9.0 dB
8 :-8.5 dB
9 :-8.0 dB
10 :-7.5 dB
11 :-7.0 dB
12 :-6.5 dB
13 :-6.0 dB
14 :-5.5 dB
15 :-5.0 dB
…

Integer32r/w

Constraints:
range: 1-37

.1.3.6.1.4.1.2011.6.36.11.3.1.5

hwOntPotsPotsSignaling

pots signaling
Options:
1.loopStart(1) -indicates the pots signaling is loop-start
2.groundStart(2) -indicates the pots signaling is ground-start
3.loopReverseBattery(3) -indicates the pots sign…

Enumerationr/w

Enumerated Values:

1	loopStart
2	groundStart
3	loopReverseBattery
4	coinFirst
5	dialToneFirst
6	multiParty

.1.3.6.1.4.1.2011.6.36.11.3.1.6

hwOntPotsRowStatus

Options:
1.active(1) -indicates active
2.notInService(2) -indicates not in service
3.notReady(3) -indicates not ready
4.createAndGo(4) -indicates create and go
5.createAndWait(5) -indicates crea…

hwOntPotsTemplateBindTimes

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.2011.6.36.11.3.1.7

The bind time of this profile

hwOntSipAgentTemplateIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.36.11.3.1.8

hwOntSipAgentTemplateTable

table

.1.3.6.1.4.1.2011.6.36.11.4 · 1 row entry · 21 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwOntSipAgentTemplateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-ONT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-ONT-MIB::hwOntSipAgentTemplateTable'

Sipagent profile table.
The index of this table is hwOntSipAgentTemplateIndex

hwOntSipAgentTemplateEntry row .1.3.6.1.4.1.2011.6.36.11.4.1

Sipagent profile table.
The index of this entry is hwOntSipAgentTemplateIndex

Indexes

Column Syntax OID

hwOntSipAgentTemplateIndex

The profile ID of sipagent profile table.

Integer32

Constraints:
range: -1--1
range: 1-64

.1.3.6.1.4.1.2011.6.36.11.4.1.1

hwOntSipAgentTemplateName

The profile Name of sipagent profile table.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.6.36.11.4.1.2

hwOntSipAgentProxyUri

Proxy server uri.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2011.6.36.11.4.1.3

hwOntSipAgentRtpPortMin

The min udp port of RTP.
Default: 50000

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.6.36.11.4.1.4

hwOntSipAgentRtpPortMax

The max udp port of RTP.
Default: 60000

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.6.36.11.4.1.5

hwOntSipAgentRtpDscp

The DSCP of Rtp.
Default: 46

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.2011.6.36.11.4.1.6

hwOntSipAgentSignalTransMode

Transfer mode of signal.
Options:
1.tcp(1) -indicates the signal transfer mode is tcp
2.udp(2) -indicates the signal transfer mode is udp
Default:udp(2)

Enumerationr/w

Enumerated Values:

1	tcp
2	udp

.1.3.6.1.4.1.2011.6.36.11.4.1.7

hwOntSipAgentSignalPortId

The udp port of signal.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.6.36.11.4.1.8

hwOntSipAgentSignalDscp

The DSCP of signal.
Default: 24

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.2011.6.36.11.4.1.9

hwOntSipAgentRegisterUri

The URI of register server.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2011.6.36.11.4.1.10

hwOntSipAgentRegExpiration

The valid time of register.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.36.11.4.1.11

hwOntSipAgentReRegStartTime

The time before refresh when reg time will timeout.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.36.11.4.1.12

hwOntSipAgentVoicemailUri

The URI of voicemail server.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2011.6.36.11.4.1.13

hwOntSipAgentVoicemailSubExpir

The voicemail's valid time of reg.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.36.11.4.1.14

hwOntSipAgentConfFactoryUri

The uri of Confence Factory's server.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2011.6.36.11.4.1.15

hwOntSipAgentBridgedLineAgentUri

The BridgedLine's Server URI.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2011.6.36.11.4.1.16

hwOntSipAgentUserAuthRealm

The user Realm.

OctetStringr/w

Constraints:
range: 0-24

.1.3.6.1.4.1.2011.6.36.11.4.1.17

hwOntSipAgentRowStatus

Options:
1.active(1) -indicates active
2.notInService(2) -indicates not in service
3.notReady(3) -indicates not ready
4.createAndGo(4) -indicates create and go
5.createAndWait(5) -indicates crea…

hwOntSipAgentTemplateBindTimes

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2011.6.36.11.4.1.18

The bind time of this profile.

hwOntDigitMapTemplateIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.36.11.4.1.19

hwOntSipAgentHomeDomain

The Home Domain.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2011.6.36.11.4.1.20

hwOntSipAgentServerType

The server type. It is valid for EPON ONT and invalid for GPON ONT.
Options:
1.general(1) -indicates general SIP server
2.ims(2) -indicates IMS
Default:general(1)

Enumerationr/w

Enumerated Values:

1	general
2	ims

.1.3.6.1.4.1.2011.6.36.11.4.1.21

hwOntDigitMapTemplateTable

table

.1.3.6.1.4.1.2011.6.36.11.5 · 1 row entry · 8 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwOntDigitMapTemplateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-ONT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-ONT-MIB::hwOntDigitMapTemplateTable'

The DigitMap profile table.
The index of this table is hwOntDigitMapTemplateIndex

hwOntDigitMapTemplateEntry row .1.3.6.1.4.1.2011.6.36.11.5.1

The DigitMap profile table.
The index of this entry is hwOntDigitMapTemplateIndex

Indexes

Column Syntax OID

hwOntDigitMapTemplateIndex

The profile ID digitmap table.

Integer32

Constraints:
range: -1--1
range: 1-64

.1.3.6.1.4.1.2011.6.36.11.5.1.1

hwOntDigitMapTemplateName

The profile Name digitmap table.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.6.36.11.5.1.2

hwOntDigitMapCriticalDialTime

The Critical Dial Time.
Default: 4000
Unit: ms

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.2011.6.36.11.5.1.3

hwOntDigitMapPartialDialTime

The Partial Dial Time.
Default: 16000
Unit: ms

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.2011.6.36.11.5.1.4

hwOntDigitMapFormat

The Format of Digitmap.
Options:
1. notDefined(1) -indicates the digital format is not defined
2. h248Format(2) -indicates the digital format is h248
3. nscFormat(3) -indicates…

Enumerationr/w

Enumerated Values:

1	notDefined
2	h248Format
3	nscFormat
4	vendorSpencificFormat

.1.3.6.1.4.1.2011.6.36.11.5.1.5

hwOntDigitMapRowStatus

Options:
1.active(1) -indicates active
2.notInService(2) -indicates not in service
3.notReady(3) -indicates not ready
4.createAndGo(4) -indicates create and go
5.createAndWait(5) -indicates crea…

hwOntDigitMapTemplateBindTimes

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2011.6.36.11.5.1.6

The bind time of this profile.

hwOntDigitMapTemplateIndex hwOntDigitMapTokenId

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.36.11.5.1.7

hwOntDigitMapRohTime

The Roh Time.
Default: 6
Unit: s

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.5.1.8

hwOntDigitMapTemplateTokenTable

table

.1.3.6.1.4.1.2011.6.36.11.6 · 1 row entry · 3 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwOntDigitMapTemplateTokenTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-ONT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-ONT-MIB::hwOntDigitMapTemplateTokenTable'

The digitmap token table.
The indexes of this table are hwOntDigitMapTemplateIndex, hwOntDigitMapTokenId

hwOntDigitMapTemplateTokenEntry row .1.3.6.1.4.1.2011.6.36.11.6.1

The digitmap token table.
The indexes of this entry are hwOntDigitMapTemplateIndex, hwOntDigitMapTokenId

Indexes

Column Syntax OID

hwOntDigitMapTokenId

The digitmap token Id.

Integer32

Constraints:
range: 1-200

.1.3.6.1.4.1.2011.6.36.11.6.1.1

hwOntDigitMapToken

The digitmap token body.

OctetStringr/w

Constraints:
range: 1-27

.1.3.6.1.4.1.2011.6.36.11.6.1.2

hwOntDigitMapTokenRowStatus

Options:
1.active(1) -indicates active
2.notInservice(2) -indicates not in service
3.notReady(3) -indicates not ready
4.createAndGo(4) -indicates create and go
5.createAndWait(5) -indicat…

Enumerationr/w

Enumerated Values:

1	active
2	notInservice
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.6.36.11.6.1.3

hwOntPstnCTPConfigTable

table

.1.3.6.1.4.1.2011.6.36.11.8 · 1 row entry · 14 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwOntPstnCTPConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-ONT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-ONT-MIB::hwOntPstnCTPConfigTable'

Pstn CTP Config Table.
The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex.

hwOntPstnCTPConfigEntry row .1.3.6.1.4.1.2011.6.36.11.8.1

Pstn CTP Config Table.
The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex.

Indexes

hwOntPstnCTPNewServiceRight

Column Syntax OID

hwOntPstnCTPTelNo

POTS user's telephone number of ONT

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2011.6.36.11.8.1.1

POTS user's service right of ONT. It is valid for GPON ONT and invalid for EPON ONT.
Options:
0.callWaiting(0),
1.threeParty(1),
2.callTransfer(2),
3.callHold(3),
4.callPark(4),
5.doNotDisturb(5),
6.conference(6),
7.mes…

Bitsr/w

Enumerated Values:

0	callWaiting
1	threeParty
2	callTransfer
3	callHold
4	callPark
5	doNotDisturb
6	conference
7	messageWaitingIndication
8	hotline
9	hotdelay

.1.3.6.1.4.1.2011.6.36.11.8.1.2

hwOntPstnCTPHotlineUri

user's hot line number(URI). It is valid for GPON ONT and invalid for EPON ONT.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.6.36.11.8.1.3

hwOntPstnCTPUsername

user's name.

OctetStringr/w

Constraints:
range: 0-50

.1.3.6.1.4.1.2011.6.36.11.8.1.4

hwOntPstnCTPPassword

user's password.

OctetStringr/w

Constraints:
range: 0-24

.1.3.6.1.4.1.2011.6.36.11.8.1.5

hwOntPotsCTPTemplateIndex

POTS profile index which is bound to POTS user. It is valid for GPON ONT and invalid for EPON ONT.

Integer32r/w

Constraints:
range: -1--1
range: 1-64

.1.3.6.1.4.1.2011.6.36.11.8.1.6

hwOntPotsCTPTemplateName

POTS profile name which is bound to POTS user. It is valid for GPON ONT and invalid for EPON ONT.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.6.36.11.8.1.7

hwOntPstnCTPDigitmapTemplateIndex

DigitalMap profile index which is bound to POTS user.
If only set digitmap profile(only setting hwOntPstnCTPDigitmapTemplateIndex and hwOntPstnCTPDigitmapTemplateName) for EPON ONT,
hwVoiceOntPortIndex is invalid(mean…

Integer32r/w

Constraints:
range: -1--1
range: 1-64

.1.3.6.1.4.1.2011.6.36.11.8.1.8

hwOntPstnCTPDigitmapTemplateName

DigitalMap profile name which is bound to POTS user.
If only set digitmap profile(only setting hwOntPstnCTPDigitmapTemplateIndex and hwOntPstnCTPDigitmapTemplateName) for EPON ONT,
hwVoiceOntPortIndex is invalid(means …

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.6.36.11.8.1.9

hwOntPstnCTPSipAgentTemplateIndex

SipAgent profile index which is bound to POTS user.

Integer32r/w

Constraints:
range: -1--1
range: 1-64

.1.3.6.1.4.1.2011.6.36.11.8.1.10

hwOntPstnCTPSipAgentTemplateName

SipAgent profile name which is bound to POTS user.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.6.36.11.8.1.11

hwOntPstnCTPIPIndex

IP address index which is bound to POTS user.

Integer32r/w

Constraints:
range: -1-3

.1.3.6.1.4.1.2011.6.36.11.8.1.12

hwOntPotsAdministrativeState

Pots' administrative state.
Options:
1.unlock(1) -indicates the pots is unlocked
2.lock(2) -indicates the pots is locked
Default: unlock(1)

Enumerationr/w

Enumerated Values:

1	unlock
2	lock

.1.3.6.1.4.1.2011.6.36.11.8.1.13

hwOntPotsCTPRowStatus

row status.
Options:
1.active(1) -indicates active
2.notInService(2) -indicates not in service
3.notReady(3) -indicates not ready
4.createAndGo(4) -indicates create and go
5.createAndWait(5) -in…

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2011.6.36.11.8.1.14

hwSIPAgentPerformanceMonitorTable

table

.1.3.6.1.4.1.2011.6.36.11.9 · 1 row entry · 13 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwSIPAgentPerformanceMonitorTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-ONT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-ONT-MIB::hwSIPAgentPerformanceMonitorTable'

SIPAgent Performance Monitor Table.
The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex.

hwSIPAgentPerformanceMonitorEntry row .1.3.6.1.4.1.2011.6.36.11.9.1

SIPAgent Performance Monitor Table.
The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex.

Indexes

Column	Syntax	OID
hwSIPAgentTransactions This attribute counts the number of new transactions that were initiated.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.36.11.9.1.1`
hwSIPAgentRxInviteReqs This attribute counts received invite messages, including retransmissions.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.36.11.9.1.2`
hwSIPAgentRxInviteRetrans This attribute counts received invite retransmission messages.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.36.11.9.1.3`
hwSIPAgentRxNoninviteReqs This attribute counts received non-invite messages, including retransmissions.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.36.11.9.1.4`
hwSIPAgentRxNoninviteRetrans This attribute counts received non-invite retransmission messages.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.36.11.9.1.5`
hwSIPAgentRxResponse This attribute counts total responses received.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.36.11.9.1.6`
hwSIPAgentRxResponseRetransmissions This attribute counts total response retransmissions received.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.36.11.9.1.7`
hwSIPAgentTxInviteReqs This attribute counts transmitted invite messages, including retransmissions.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.36.11.9.1.8`
hwSIPAgentTxInviteRetrans This attribute counts transmitted invite retransmission messages.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.36.11.9.1.9`
hwSIPAgentTxNoninviteReqs This attribute counts transmitted non-invite messages, including retransmissions.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.36.11.9.1.10`
hwSIPAgentTxNoninviteRetrans This attribute counts transmitted non-invite retransmission messages.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.36.11.9.1.11`
hwSIPAgentTxResponse This attribute counts the total responses sent.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.36.11.9.1.12`
hwSIPAgentTxResponseRetransmissions This attribute counts total response retransmissions sent.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.36.11.9.1.13`

hwSIPCallPerformanceMonitorTable

table

.1.3.6.1.4.1.2011.6.36.11.10 · 1 row entry · 5 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwSIPCallPerformanceMonitorTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-ONT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-ONT-MIB::hwSIPCallPerformanceMonitorTable'

SIP Call Performance Monitor Table.
The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex.

hwSIPCallPerformanceMonitorEntry row .1.3.6.1.4.1.2011.6.36.11.10.1

SIP Call Performance Monitor Table.
The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex.

Indexes

Column	Syntax	OID
hwSIPCallFailedToConnectCounter This attribute counts the number of times the SIP UA failed to reach/connect its TCP/UDP peer during SIP call initiations.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.36.11.10.1.1`
hwSIPCallFailedToValidateCounter This attribute counts the number of times the SIP UA failed to validate its peer during SIP call initiations.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.36.11.10.1.2`
hwSIPCallTimeoutCounter This attribute counts the number of times the SIP UA timed out during SIP call initiations.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.36.11.10.1.3`
hwSIPCallFailedReceivedCounter This attribute counts the number of times the SIP UA received a failure error code during SIP call initiations.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.36.11.10.1.4`
hwSIPCallFailedToAuthenticateCounter This attribute counts the number of times the SIP UA failed to authenticate itself during SIP call initiations.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.36.11.10.1.5`

hwOntPstnCallerEmulateOprTable

table

.1.3.6.1.4.1.2011.6.36.11.11 · 1 row entry · 8 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwOntPstnCallerEmulateOprTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-ONT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-ONT-MIB::hwOntPstnCallerEmulateOprTable'

ont caller emulate test table.
The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex.

hwOntPstnCallerEmulateOprEntry row .1.3.6.1.4.1.2011.6.36.11.11.1

ont caller emulate test table.
The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex.

Indexes

hwOntPstnCallerEmulateOprType

Column Syntax OID

Operation type
Options:
1.stop(1) -indicates that stop test;
2.start(2) -indicates that start test

Enumerationr/w

Enumerated Values:

1	stop
2	start

.1.3.6.1.4.1.2011.6.36.11.11.1.1

hwOntPstnCallerEmulateCalledTelNo

Called telephone number

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.6.36.11.11.1.2

hwOntPstnCallerEmulateTestStatus

Test Status.
Options:
1. startSuccessfully(1) -indicates start test successfully
2. stopSuccessfully(2) -indicates stop test successfully
3. sendDTMFSuccessfully(3) -indicates send DTMF succe…

Enumeration

Enumerated Values:

1	startSuccessfully
2	stopSuccessfully
3	sendDTMFSuccessfully
4	testOuttime
5	noDialtone
6	callerDialNumberAlready
7	noRinging
8	noRingbackTone
9	waitingAgentMessageOuttime
10	testingFailure
11	agentMessageAck
12	calledoffhook
13	testingAbnormal
14	broadbandtesting
15	capturefail
16	notratb
17	configsuccessfully
18	ring
19	calleroffhook
20	playdialtone
21	dialnumbercomplete
22	idle
23	receiving
24	ringingBack
25	connect
26	busyTone
27	onHook
28	testEnd
255	other

.1.3.6.1.4.1.2011.6.36.11.11.1.3

hwOntPstnCallerEmulateTestResult

Test Result.
Options:
1. callerNoDialogTone(1) -indicates that the caller has no dialog tone
2. callerOffHookingBusy(2) -indicates that the caller is offhooking busy
3. callerDialogingBusy(3) …

Enumeration

Enumerated Values:

1	callerNoDialogTone
2	callerOffHookingBusy
3	callerDialogingBusy
4	callerNoDialog
5	callerDialogedBusy
6	callerDialogedNoTalk
7	callRelease
8	matchNoCompleted
9	sendNoCompleted
10	testSucceed
11	callerMatchFailed
12	notReceiveSSOffhookSignal
13	dialNumberNotCompared
14	backToneNotReceived
15	chanelCreateFailed
16	ssNoResponseHookSignal
255	other

.1.3.6.1.4.1.2011.6.36.11.11.1.4

hwOntPstnCallerEmulateTestHoldTime

Caller Emulate test hold time, the test will auto ended when this time out.

Integer32r/w

Constraints:
range: 1-600

.1.3.6.1.4.1.2011.6.36.11.11.1.5

hwOntPstnCallerEmulateReportTelNo

The actual called number string checked and send to MGC or IMS.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.6.36.11.11.1.6

hwOntPstnCallerEmulateErrorCode

Error code

hwOntPstnCallerEmulateTestRequestID

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.36.11.11.1.7

Request ID

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.36.11.11.1.8

hwOntPstnCalledEmulateOprTable

table

.1.3.6.1.4.1.2011.6.36.11.12 · 1 row entry · 5 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwOntPstnCalledEmulateOprTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-ONT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-ONT-MIB::hwOntPstnCalledEmulateOprTable'

ont called emulate test table.
The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex

hwOntPstnCalledEmulateOprEntry row .1.3.6.1.4.1.2011.6.36.11.12.1

ont called emulate test table.
The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex

Indexes

hwOntPstnCalledEmulateOprType

Column Syntax OID

Operation type .
Options:
1. stop(1) -Stop test
2. start(2) -Start test

Enumerationr/w

Enumerated Values:

1	stop
2	start

.1.3.6.1.4.1.2011.6.36.11.12.1.1

hwOntPstnCalledEmulateTestStatus

Test Status.
Options:
1. startSuccessfully(1) -indicates start test successfully
2. stopSuccessfully(2) -indicates stop test successfully
3. sendDTMFSuccessfully(3) -indicates send DTMF succe…

Enumeration

Enumerated Values:

1	startSuccessfully
2	stopSuccessfully
3	sendDTMFSuccessfully
4	testOuttime
5	noDialtone
6	callerDialNumberAlready
7	noRinging
8	noRingbackTone
9	waitingAgentMessageOuttime
10	testingFailure
11	agentMessageAck
12	calledoffhook
13	testingAbnormal
14	broadbandtesting
15	capturefail
16	notratb
17	configsuccessfully
18	ring
19	calleroffhook
20	playdialtone
21	dialnumbercomplete
22	onHook
23	testEnd
24	connected
255	other

.1.3.6.1.4.1.2011.6.36.11.12.1.2

hwOntPstnCalledEmulateTestResult

Test Result.
Options:
1. calledNoRing(1) -indicates that the called does not ring
2. calledNoOffHook(2) -indicates that the called does not off hook
3. calledOffHookingBusy(3) -indicates that the called…

Enumeration

Enumerated Values:

1	calledNoRing
2	calledNoOffHook
3	calledOffHookingBusy
4	calledNoTalk
5	callRelease
6	matchNoCompleted
7	sendNoCompleted
8	testSucceed
9	calledMatchFailed
10	mGInsideReason
255	other

.1.3.6.1.4.1.2011.6.36.11.12.1.3

hwOntPstnCalledEmulateTestHoldTime

Called Emulate test hold time, the test will auto ended when this time out.

Integer32r/w

Constraints:
range: 1-600

.1.3.6.1.4.1.2011.6.36.11.12.1.4

hwOntPstnCalledEmulateTestRequestID

Request ID

hwVoiceIfIndex hwVoiceOntIndex hwVoiceOntPortIndex hwOntVsqmStatisticIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.36.11.12.1.5

hwOntVsqmWorstHistoryStatisticTable

table

.1.3.6.1.4.1.2011.6.36.11.13 · 1 row entry · 7 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwOntVsqmWorstHistoryStatisticTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-ONT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-ONT-MIB::hwOntVsqmWorstHistoryStatisticTable'

ont port qos query table.
The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex, hwOntVsqmStatisticIndex

hwOntVsqmWorstHistoryStatisticEntry row .1.3.6.1.4.1.2011.6.36.11.13.1

ont port qos query table.
The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex, hwOntVsqmStatisticIndex

Indexes

Column	Syntax	OID
hwOntVsqmStatisticIndex Indicates the index	Integer32 Constraints: `range: 0-9`	`.1.3.6.1.4.1.2011.6.36.11.13.1.1`
hwOntVsqmStatisticDateTime Indicates the Statistic Date Time.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.6.36.11.13.1.2`
hwOntVsqmTotalReceivePacketNum Indicates the total receive packet number.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.6.36.11.13.1.3`
hwOntVsqmTotalSendPacketNum Indicates the total send packet number.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.6.36.11.13.1.4`
hwOntVsqmMeanLoopDelay Indicates the mean Loop Delay. Unit: millisecond	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.36.11.13.1.5`
hwOntVsqmMeanJitter Indicates the Mean Network Jitter. Unit: millisecond	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.36.11.13.1.6`
hwOntVsqmPacketLossRate Indicates the Packet Loss Rate in the interval. Unit: 1/100	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.36.11.13.1.7`

hwOntPotsStatusTable

table

.1.3.6.1.4.1.2011.6.36.11.14 · 1 row entry · 6 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwOntPotsStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-ONT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-ONT-MIB::hwOntPotsStatusTable'

The table is used to display ptp and the ctp status of the ont
The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex,hwVoiceOntPortIndex

hwOntPotsStatusEntry row .1.3.6.1.4.1.2011.6.36.11.14.1

The table is used to display ptp and the ctp status of the ont
The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex,hwVoiceOntPortIndex

Indexes

hwOntMgVagIfIndex hwOntMgVagOntIndex hwOntMgVagMgId

Column	Syntax	OID
hwOntPotsPtpAdmState This attribute reports the current administrative state of a VoIP POTS port.Code points are assigned as follows: 0: unlock 1: lock The others means invaild.	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.2011.6.36.11.14.1.1`
hwOntPotsCtpSrvType This attribute reports the current state of a VoIP POTS port session.Code points are assigned as follows: 0: idle/none 1: 2way 2: 3way 3: fax 4: telem 5: conference The others means invaild.	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.2011.6.36.11.14.1.2`
hwOntPotsHookState This attribute indicates the current state of the subscriber line.Code points are assigned as follows: 0: onhook, 1: offhook The others means invaild.	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.2011.6.36.11.14.1.3`
hwOntPotsCallState This attribute reports the POTS call status.Code points are assigned as follows: 0: Registering 1: Idle,on-hook 2: Off-hook 3: Dialing 4: Ringing 5: RingBack 6: Connecting 7: Connected 8: Disconnecting 9: Failed Registr…	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.2011.6.36.11.14.1.4`
hwOntPotsCtpSrvState This attribute reports the POTS service status. Code points are assigned as follows: 0: endLocal(out of service by local) 1: endRemote(out of service by remote without user) 2: endAuto(out of service by remote fault) 3:…	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.2011.6.36.11.14.1.5`
hwOntPotsCodec Reports the current codec used for a VoIP POTS port.Code points are assigned as follows: 0: G.711A 1: G.729 2: G.711U 3: G.723 4: G.726 5: T.38 6: G.722 7: reserved 8: reserved 9: GSM 10: DVI4, 8 kHz 11: DVI4, …	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.2011.6.36.11.14.1.6`

hwOntMgVagTable

table

.1.3.6.1.4.1.2011.6.36.11.15 · 1 row entry · 28 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwOntMgVagTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-ONT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-ONT-MIB::hwOntMgVagTable'

Ont H248 and MGCP interface table.
The indexes of this table are hwOntMgVagIfIndex,hwOntMgVagOntIndex,hwOntMgVagMgId

hwOntMgVagEntry row .1.3.6.1.4.1.2011.6.36.11.15.1

Ont H248 and MGCP interface table.
The indexes of this entry are hwOntMgVagIfIndex,hwOntMgVagOntIndex,hwOntMgVagMgId

Indexes

Column Syntax OID

hwOntMgVagIfIndex

The ifindex of xPON port.

hwOntMgVagSecondaryMgcPort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.36.11.15.1.1

hwOntMgVagOntIndex

The ONT index.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.15.1.2

hwOntMgVagMgId

The MG ID.

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.6.36.11.15.1.3

hwOntMgVagIpIndex

The IP index.

Integer32r/w

Constraints:
range: 0-3

.1.3.6.1.4.1.2011.6.36.11.15.1.4

hwOntMgVagPrimaryMgc

Primary mgc.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2011.6.36.11.15.1.5

hwOntMgVagPrimaryMgcPort

The port of primary mgc.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.6.36.11.15.1.6

hwOntMgVagSecondaryMgc

Secondary mgc.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2011.6.36.11.15.1.7

The port of secondary mgc.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.6.36.11.15.1.8

hwOntMgVagMinPort

The min udp port of media rtp. It is valid for GPON ONT and invalid for EPON ONT.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.6.36.11.15.1.9

hwOntMgVagMaxPort

The max udp port of media rtp. It is valid for GPON ONT and invalid for EPON ONT.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.6.36.11.15.1.10

hwOntMgVagMediaDscp

The DSCP of media RTP. It is valid for GPON ONT and invalid for EPON ONT.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.2011.6.36.11.15.1.11

hwOntMgVagSignalPort

The udp port of signal. It is valid for GPON ONT and invalid for EPON ONT.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.6.36.11.15.1.12

hwOntMgVagSignalDscp

The DSCP of signal. It is valid for GPON ONT and invalid for EPON ONT.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.2011.6.36.11.15.1.13

hwOntMgVagMidType

The MID type of the MG message, just used by H248.
Options:
1.ip4Address(1) -indicates the MID type is ip4Address
2.domainName(2) -indicates the MID type is domainName
3.deviceName(3) -indicates the MID type …

Enumerationr/w

Enumerated Values:

1	ip4Address
2	domainName
3	deviceName

.1.3.6.1.4.1.2011.6.36.11.15.1.14

hwOntMgVagMid

The name of the MG device.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2011.6.36.11.15.1.15

hwOntMgVagMessageFormat

The message format of MG interface, just used by H248. It is valid for GPON ONT and invalid for EPON ONT.
Options:
1.textLong(1) -indicates the message format of MG interface is text-long
2.textShort(2) -indicate…

Enumerationr/w

Enumerated Values:

1	textLong
2	textShort
3	binary

.1.3.6.1.4.1.2011.6.36.11.15.1.16

hwOntMgVagVersion

The H.248 version of MG interface, just used by H248. It is valid for GPON ONT and invalid for EPON ONT.
Options:
1.ontDefault(1) -indicates the H.248 version of MG interface is ont-default
2.v1(2) -indicates …

Enumerationr/w

Enumerated Values:

1	ontDefault
2	v1
3	v2
4	v3

.1.3.6.1.4.1.2011.6.36.11.15.1.17

hwOntMgVagTidBase

The base string for the H.248 physical tid.

OctetStringr/w

Constraints:
range: 0-24

.1.3.6.1.4.1.2011.6.36.11.15.1.18

hwOntMgVagHeartbeatMode

The heartbeat mode.
Options:
1.disable(1) -indicates the heartbeat mode is disable
2.notifyMethod(2) -indicates the heartbeat mode is notify-method

Enumerationr/w

Enumerated Values:

1	disable
2	notifyMethod

.1.3.6.1.4.1.2011.6.36.11.15.1.19

hwOntMgVagHeartbeatCycle

The heartbeat cycle.

Integer32r/w

Constraints:
range: 5-655

.1.3.6.1.4.1.2011.6.36.11.15.1.20

hwOntMgVagHeartbeatCount

The heartbeat count.

Integer32r/w

Constraints:
range: 1-20

.1.3.6.1.4.1.2011.6.36.11.15.1.21

hwOntMgVagTidNumber

The rtp tid number.

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.2011.6.36.11.15.1.22

hwOntMgVagTidPrefix

The rtp tid prefix.

OctetStringr/w

Constraints:
range: 0-16

.1.3.6.1.4.1.2011.6.36.11.15.1.23

hwOntMgVagTidMode

The rtp tid mode.
Options:
1.aligned(1) -indicates the rtp tid mode is aligned
2.notAligned(2) -indicates the rtp tid mode is not-aligned

Enumerationr/w

Enumerated Values:

1	aligned
2	notAligned

.1.3.6.1.4.1.2011.6.36.11.15.1.24

hwOntMgVagTidDigitBegin

The beginning number of the rtp tid digit.

Integer32r/w

Constraints:
range: 0-99999999

.1.3.6.1.4.1.2011.6.36.11.15.1.25

hwOntMgVagTidDigitLength

The length of the rtp tid digit.

Integer32r/w

Constraints:
range: 1-16

.1.3.6.1.4.1.2011.6.36.11.15.1.26

hwOntMgVagRowStatus

Options:
1.active(1) -indicates active
2.notInService(2) -indicates not in service
3.notReady(3) -indicates not ready
4.createAndGo(4) -indicates create and go
5.createAndWait(5) -indicates crea…

hwOntMgAttrIfIndex hwOntMgAttrOntIndex hwOntMgAttrMgId

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2011.6.36.11.15.1.27

hwOntMgProtocolType

The mg protocol type.
Options:
1.h248(1) -indicates the mg protocol is H248
2.mgcp(2) -indicates the mg protocol is MGCP
Default: H248(1)

Enumerationr/w

Enumerated Values:

1	h248
2	mgcp

.1.3.6.1.4.1.2011.6.36.11.15.1.28

hwOntMgAttrConfigTable

table

.1.3.6.1.4.1.2011.6.36.11.16 · 1 row entry · 32 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwOntMgAttrConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-ONT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-ONT-MIB::hwOntMgAttrConfigTable'

Ont MG public attribute table.
The index of this table is hwOntMgAttrIfIndex,hwOntMgAttrOntIndex,hwOntMgAttrMgId

hwOntMgAttrConfigEntry row .1.3.6.1.4.1.2011.6.36.11.16.1

Ont MG public attribute table.
The index of this entry is hwOntMgAttrIfIndex,hwOntMgAttrOntIndex,hwOntMgAttrMgId

Indexes

Column Syntax OID

hwOntMgAttrIfIndex

The ifindex of xPON port.

hwOntMgAttrOrder1stPacketPeriod

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.36.11.16.1.1

hwOntMgAttrOntIndex

The ONT index.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.16.1.2

hwOntMgAttrMgId

The MG ID.

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.6.36.11.16.1.3

hwOntMgAttrFaxMode

The fax mode.
Options:
1.passthru(1) -indicates the fax mode is passthru
2.t38(2) -indicates the fax mode is t38

Enumerationr/w

Enumerated Values:

1	passthru
2	t38

.1.3.6.1.4.1.2011.6.36.11.16.1.4

hwOntMgAttrNegoMode

The negotiate mode.
Options:
1.negotiate(1) -indicates the negotiate mode is negotiate
2.selfSwitch(2) -indicates the fax mode is self-switch

Enumerationr/w

Enumerated Values:

1	negotiate
2	selfSwitch

.1.3.6.1.4.1.2011.6.36.11.16.1.5

hwOntMgAttrOrder1stCodec

codec of order 1. It is valid for GPON ONT and invalid for EPON ONT.

Integer32r/w

Constraints:
range: 0-95
range: 255-255

.1.3.6.1.4.1.2011.6.36.11.16.1.6

packet period of order 1. It is valid for GPON ONT and invalid for EPON ONT.
Options:
1.time10ms(1) -indicates the packet period is 10ms
2.time15ms(2) -indicates the packet period is 15ms
3.time20ms(3) -indicates t…

Enumerationr/w

Enumerated Values:

1	time10ms
2	time15ms
3	time20ms
4	time25ms
5	time30ms

.1.3.6.1.4.1.2011.6.36.11.16.1.7

hwOntMgAttrOrder1stSilenceFlag

silence suppression of order 1. It is valid for GPON ONT and invalid for EPON ONT.
Options:
1.off(1) -indicates the silence suppression is off
2.on(2) -indicates the silence suppression is on

Enumerationr/w

Enumerated Values:

1	off
2	on

.1.3.6.1.4.1.2011.6.36.11.16.1.8

hwOntMgAttrOrder2stCodec

codec of order 2. It is valid for GPON ONT and invalid for EPON ONT.

Integer32r/w

Constraints:
range: 0-95
range: 255-255

.1.3.6.1.4.1.2011.6.36.11.16.1.9

hwOntMgAttrOrder2stPacketPeriod

packet period of order 2. It is valid for GPON ONT and invalid for EPON ONT.
Options:
1.time10ms(1) -indicates the packet period is 10ms
2.time15ms(2) -indicates the packet period is 15ms
3.time20ms(3) -indicates t…

Enumerationr/w

Enumerated Values:

1	time10ms
2	time15ms
3	time20ms
4	time25ms
5	time30ms

.1.3.6.1.4.1.2011.6.36.11.16.1.10

hwOntMgAttrOrder2stSilenceFlag

silence suppression of order 2. It is valid for GPON ONT and invalid for EPON ONT.
Options:
1.off(1) -indicates the silence suppression is off
2.on(2) -indicates the silence suppression is on

Enumerationr/w

Enumerated Values:

1	off
2	on

.1.3.6.1.4.1.2011.6.36.11.16.1.11

hwOntMgAttrOrder3stCodec

codec of order 3. It is valid for GPON ONT and invalid for EPON ONT.

Integer32r/w

Constraints:
range: 0-95
range: 255-255

.1.3.6.1.4.1.2011.6.36.11.16.1.12

hwOntMgAttrOrder3stPacketPeriod

packet period of order 3. It is valid for GPON ONT and invalid for EPON ONT.
Options:
1.time10ms(1) -indicates the packet period is 10ms
2.time15ms(2) -indicates the packet period is 15ms
3.time20ms(3) -indicates t…

Enumerationr/w

Enumerated Values:

1	time10ms
2	time15ms
3	time20ms
4	time25ms
5	time30ms

.1.3.6.1.4.1.2011.6.36.11.16.1.13

hwOntMgAttrOrder3stSilenceFlag

silence suppression of order 3. It is valid for GPON ONT and invalid for EPON ONT.
Options:
1.off(1) -indicates the silence suppression is off
2.on(2) -indicates the silence suppression is on

Enumerationr/w

Enumerated Values:

1	off
2	on

.1.3.6.1.4.1.2011.6.36.11.16.1.14

hwOntMgAttrOrder4stCodec

codec of order 4. It is valid for GPON ONT and invalid for EPON ONT.

Integer32r/w

Constraints:
range: 0-95
range: 255-255

.1.3.6.1.4.1.2011.6.36.11.16.1.15

hwOntMgAttrOrder4stPacketPeriod

Enumerationr/w

Enumerated Values:

1	time10ms
2	time15ms
3	time20ms
4	time25ms
5	time30ms

.1.3.6.1.4.1.2011.6.36.11.16.1.16

hwOntMgAttrOrder4stSilenceFlag

silence suppression of order 4. It is valid for GPON ONT and invalid for EPON ONT.
Options:
1.off(1) -indicates the silence suppression is off
2.on(2) -indicates the silence suppression is on

Enumerationr/w

Enumerated Values:

1	off
2	on

.1.3.6.1.4.1.2011.6.36.11.16.1.17

hwOntMgAttrOobDtmfFlag

Oob Dtmf Flag. It is valid for GPON ONT and invalid for EPON ONT.
Options:
1.disable(1) -indicates the Oob DTMF is disable
2.enable(2) -indicates the Oob DTMF is enable

Enumerationr/w

Enumerated Values:

1	disable
2	enable

.1.3.6.1.4.1.2011.6.36.11.16.1.18

hwOntMgAttrAnnouncementType

Announcement after off hook time out. It is valid for GPON ONT and invalid for EPON ONT.
Options:
1.silence(1) -indicates play the voice of silence after off hook time out
2.reordertone(2) -indicates p…

Enumerationr/w

Enumerated Values:

1	silence
2	reordertone
3	fastbusy
4	voiceannouncement
5	none

.1.3.6.1.4.1.2011.6.36.11.16.1.19

hwOntMgAttrJitterBuffTarget

The target value of fixed jitter buffer. It is valid for GPON ONT and invalid for EPON ONT.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.2011.6.36.11.16.1.20

hwOntMgAttrJitterBuffMax

The max value of jitter buffer. It is valid for GPON ONT and invalid for EPON ONT.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.2011.6.36.11.16.1.21

hwOntMgAttrJitterBuffMin

The min value of jitter buffer. It is valid for GPON ONT and invalid for EPON ONT.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.2011.6.36.11.16.1.22

hwOntMgAttrJitterBuffDynTarget

The target value of dynamic jitter buffer. It is valid for GPON ONT and invalid for EPON ONT.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.2011.6.36.11.16.1.23

hwOntMgAttrEchoFlag

echo flag. It is valid for GPON ONT and invalid for EPON ONT.
Options:
1.off(1) -indicates the echo flag is off
2.on(2) -indicates the echo flag is on

Enumerationr/w

Enumerated Values:

1	off
2	on

.1.3.6.1.4.1.2011.6.36.11.16.1.24

hwOntMgAttrPstnProtocolVariant

country code, means geography location. It is valid for GPON ONT and invalid for EPON ONT.
Options:
Indicate the E.164 country code

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.6.36.11.16.1.25

hwOntMgAttrPiggybackEventFlag

whether process piggyback events or not. It is valid for GPON ONT and invalid for EPON ONT.
Options:
1.disable(1) -indicates don't process piggyback events
2.enable(2) -indicates process piggyback events

Enumerationr/w

Enumerated Values:

1	disable
2	enable

.1.3.6.1.4.1.2011.6.36.11.16.1.26

hwOntMgAttrToneEventFlag

whether process Tone events or not. It is valid for GPON ONT and invalid for EPON ONT.
Options:
1.disable(1) -indicates don't process Tone events
2.enable(2) -indicates process Tone events

Enumerationr/w

Enumerated Values:

1	disable
2	enable

.1.3.6.1.4.1.2011.6.36.11.16.1.27

hwOntMgAttrDtmfEventFlag

whether process Dtmf events or not. It is valid for GPON ONT and invalid for EPON ONT.
Options:
1.disable(1) -indicates don't process Dtmf events
2.enable(2) -indicates process Dtmf events

Enumerationr/w

Enumerated Values:

1	disable
2	enable

.1.3.6.1.4.1.2011.6.36.11.16.1.28

hwOntMgAttrCasEventFlag

whether process cas events or not. It is valid for GPON ONT and invalid for EPON ONT.
Options:
1.disable(1) -indicates don't process cas events
2.enable(2) -indicates process cas events

Enumerationr/w

Enumerated Values:

1	disable
2	enable

.1.3.6.1.4.1.2011.6.36.11.16.1.29

hwOntMgAttrFlashUpper

The flash upper limit. It is valid for GPON ONT and invalid for EPON ONT.
If the value is 0, it indicates ONT own default value.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.6.36.11.16.1.30

hwOntMgAttrFlashLower

The flash lower limit. It is valid for GPON ONT and invalid for EPON ONT.
If the value is 0, it indicates ONT own default value.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.6.36.11.16.1.31

hwOntMgAttrSilence

The silence switch. It is valid for GPON ONT and invalid for EPON ONT.
Options:
1.disable(1) -indicates the silence switch is disable
2.enable(2) -indicates the silence switch is enable
3.baseOnCodec(3) …

Enumerationr/w

Enumerated Values:

1	disable
2	enable
3	baseOnCodec

.1.3.6.1.4.1.2011.6.36.11.16.1.32

hwOntSipVagTable

table

.1.3.6.1.4.1.2011.6.36.11.17 · 1 row entry · 33 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwOntSipVagTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-ONT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-ONT-MIB::hwOntSipVagTable'

SIP VAG Table.
The indexes of this table are hwOntSipVagIfIndex, hwOntSipVagOntIndex, hwOntSipVagMgId.

hwOntSipVagEntry row .1.3.6.1.4.1.2011.6.36.11.17.1

SIP VAG Table.
The indexes of this entry are hwOntSipVagIfIndex, hwOntSipVagOntIndex, hwOntSipVagMgId.

Indexes

hwOntSipVagIfIndex hwOntSipVagOntIndex hwOntSipVagMgId

Column Syntax OID

hwOntSipVagIfIndex

The ifindex.

hwOntSipVagSecondaryProxyUri

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.36.11.17.1.1

hwOntSipVagOntIndex

The ONT ID.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.17.1.2

hwOntSipVagMgId

The MG ID.

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.6.36.11.17.1.3

hwOntSipVagIpIndex

The index of IP interface.

Integer32r/w

Constraints:
range: 0-3

.1.3.6.1.4.1.2011.6.36.11.17.1.4

hwOntSipVagProxyPort

The port of proxy server.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.6.36.11.17.1.5

The URI of secondary proxy server.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2011.6.36.11.17.1.6

hwOntSipVagSecondaryProxyPort

The port of secondary proxy server.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.6.36.11.17.1.7

hwOntSipVagRegisterPort

The port of register server. It is invalid For EPON ONT when server type is IMS.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.6.36.11.17.1.8

hwOntSipVagSecondaryRegisterUri

The URI of secondary register server. It is invalid For EPON ONT when server type is IMS.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2011.6.36.11.17.1.9

hwOntSipVagSecondaryRegisterPort

The port of secondary register server. It is invalid For EPON ONT when server type is IMS.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.6.36.11.17.1.10

hwOntSipVagOutboundUri

The URI of outbound server. It is invalid For EPON ONT when server type is IMS.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2011.6.36.11.17.1.11

hwOntSipVagOutboundPort

The port of outbound server. It is invalid For EPON ONT when server type is IMS.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.6.36.11.17.1.12

hwOntSipVagHeartbeatMode

The heartbeat mode of ONT SIP agent.
Options:
1.disable(1) -indicates disable heartbeat
2.enable(2) -indicates enable heartbeat

Enumerationr/w

Enumerated Values:

1	disable
2	enable

.1.3.6.1.4.1.2011.6.36.11.17.1.13

hwOntSipVagHeartbeatCycle

The heartbeat cycle of ONT SIP agent.

Integer32r/w

Constraints:
range: 1-1000

.1.3.6.1.4.1.2011.6.36.11.17.1.14

hwOntSipVagHeartbeatCount

The heartbeat count of ONT SIP agent.

Integer32r/w

Constraints:
range: 1-30

.1.3.6.1.4.1.2011.6.36.11.17.1.15

hwOntSipVagProxyUri

The URI of proxy server.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2011.6.36.11.17.1.16

hwOntSipVagRtpPortMin

The minimal port of media. It is valid for GPON ONT and invalid for EPON ONT.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.6.36.11.17.1.17

hwOntSipVagRtpPortMax

The maximal port of media. It is valid for GPON ONT and invalid for EPON ONT.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.6.36.11.17.1.18

hwOntSipVagRtpDscp

The DSCP of media. It is valid for GPON ONT and invalid for EPON ONT.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.2011.6.36.11.17.1.19

hwOntSipVagSignalTransMode

The transfer mode of signal. It is valid for GPON ONT and invalid for EPON ONT.
Options:
1.tcp(1) -indicates tcp
2.udp(2) -indicates udp

Enumerationr/w

Enumerated Values:

1	tcp
2	udp

.1.3.6.1.4.1.2011.6.36.11.17.1.20

hwOntSipVagSignalPortId

The port ID of signal.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.6.36.11.17.1.21

hwOntSipVagSignalDscp

The DSCP of signal. It is valid for GPON ONT and invalid for EPON ONT.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.2011.6.36.11.17.1.22

hwOntSipVagRegisterUri

The URI of register server. It is invalid for EPON ONT when server type is IMS.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2011.6.36.11.17.1.23

hwOntSipVagRegExpiration

The expiration of registration.

Integer32r/w

Constraints:
range: 1-65534

.1.3.6.1.4.1.2011.6.36.11.17.1.24

hwOntSipVagReRegStartTime

Registration rereg head start time. It is valid for GPON ONT and invalid for EPON ONT.

Integer32r/w

Constraints:
range: 1-65534

.1.3.6.1.4.1.2011.6.36.11.17.1.25

hwOntSipVagVoicemailUri

The URI of voicemail. It is valid for GPON ONT and invalid for EPON ONT.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2011.6.36.11.17.1.26

hwOntSipVagVoicemailSubExpir

The subscrition expiration of voicemail. It is valid for GPON ONT and invalid for EPON ONT.

Unsigned32r/w

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.2011.6.36.11.17.1.27

hwOntSipVagConfFactoryUri

The URI of conference factory. It is valid for GPON ONT and invalid for EPON ONT.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2011.6.36.11.17.1.28

hwOntSipVagBridgedLineAgentUri

The URI of bridged line agent. It is valid for GPON ONT and invalid for EPON ONT.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2011.6.36.11.17.1.29

hwOntSipVagUserAuthRealm

The auth realm. It is valid for GPON ONT and invalid for EPON ONT.

OctetStringr/w

Constraints:
range: 0-24

.1.3.6.1.4.1.2011.6.36.11.17.1.30

hwOntSipVagHomeDomain

The home domain. It is invalid for EPON ONT when server type is not IMS.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2011.6.36.11.17.1.31

hwOntSipVagRowStatus

Options:
1.active(1) -indicates active
2.notInService(2) -indicates not in service
3.notReady(3) -indicates not ready
4.createAndGo(4) -indicates create and go
5.createAndWait(5) -indicates crea…

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2011.6.36.11.17.1.32

hwOntSipVagServerType

The server type. It is valid for EPON ONT and invalid for GPON ONT.
Options:
1.general(1) -indicates general SIP server
2.ims(2) -indicates IMS
Default:general(1)

Enumerationr/w

Enumerated Values:

1	general
2	ims

.1.3.6.1.4.1.2011.6.36.11.17.1.33

hwOntPotsPTPConfigTable

table

.1.3.6.1.4.1.2011.6.36.11.18 · 1 row entry · 4 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwOntPotsPTPConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-ONT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-ONT-MIB::hwOntPotsPTPConfigTable'

POTS PTP Electrical Attribute Table.
The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex.

hwOntPotsPTPConfigEntry row .1.3.6.1.4.1.2011.6.36.11.18.1

POTS PTP Electrical Attribute Table.
The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex.

Indexes

Column	Syntax	OID
hwOntPotsPTPSendGain Send Gain. 1 : -12.0db 2 : -11.5db 3 : -11.0db 4 : -10.5db 5 : -10.0db 6 : -9.5db 7 : -9.0db 8 : -8.5db 9 : -8.0db 10 : -7.5db 11 : -7.0db 12 : -6.5db 13 : -6.0db 14 : -5.5db 15 : -5.0db 16 : -4.5db 17 : -4.0db…	Integer32r/w Constraints: `range: 1-37`	`.1.3.6.1.4.1.2011.6.36.11.18.1.1`
hwOntPotsPTPRecvGain Recv Gain. 1 : -12.0db 2 : -11.5db 3 : -11.0db 4 : -10.5db 5 : -10.0db 6 : -9.5db 7 : -9.0db 8 : -8.5db 9 : -8.0db 10 : -7.5db 11 : -7.0db 12 : -6.5db 13 : -6.0db 14 : -5.5db 15 : -5.0db 16 : -4.5db 17 : -4.0db…	Integer32r/w Constraints: `range: 1-37`	`.1.3.6.1.4.1.2011.6.36.11.18.1.2`
hwOntPotsPTPImpedance Impedance. 1: r-600 Ohms(1) 2: r-900 Ohms(2) 3: c1:150 nF-R1:750 Ohm-R2:270 Ohm(3) 4: c1:115 nF-R1:820 Ohm-R2:220 Ohm(4) 5: c1:230 nF-R1:1500 Ohm-R2:320 Ohm(5) 65: Bureau machine in China(200+680\|\| 100nf) 66: User …	Integer32r/w Constraints: `range: 1-76`	`.1.3.6.1.4.1.2011.6.36.11.18.1.3`
hwOntPotsPTPSignaling Pots side signaling. 1: loopStart(1) 2: groundStart(2) 3: loopReverseBattery(3) 4: coinFirst(4) 5: dialToneFirst(5) 6: multiParty(6)	Integer32r/w Constraints: `range: 1-6`	`.1.3.6.1.4.1.2011.6.36.11.18.1.4`

hwOntMgCTPConfigTable

table

.1.3.6.1.4.1.2011.6.36.11.19 · 1 row entry · 16 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwOntMgCTPConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-ONT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-ONT-MIB::hwOntMgCTPConfigTable'

Ont H248 and MGCP PSTN CTP table.
The indexes of this table are hwVoiceIfIndex,hwVoiceOntIndex,hwVoiceOntPortIndex

hwOntMgCTPConfigEntry row .1.3.6.1.4.1.2011.6.36.11.19.1

Ont H248 and MGCP PSTN CTP table.
The indexes of this entry are hwVoiceIfIndex,hwVoiceOntIndex,hwVoiceOntPortIndex

Indexes

hwOntMgPstnCTPCodecSelect

Column Syntax OID

hwOntMgPstnCTPMgId

The H.248 MG ID.

Integer32r/w

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.6.36.11.19.1.1

hwOntMgPstnCTPTerminalId

The terminal ID.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2011.6.36.11.19.1.2

Selecting codec configuration from MG or user. It is valid for GPON ONT and invalid for EPON ONT.
Options:
1.baseOnUser(1) -indicates the codec is base-on-user
2.baseOnMg(2) -indicates the codec is base-on-mg
Defa…

Enumerationr/w

Enumerated Values:

1	baseOnUser
2	baseOnMg

.1.3.6.1.4.1.2011.6.36.11.19.1.3

hwOntMgPstnCTPOrder1stCodec

codec of order 1. It is valid for GPON ONT and invalid for EPON ONT.
defalut: 8

Integer32r/w

Constraints:
range: 0-95
range: 255-255

.1.3.6.1.4.1.2011.6.36.11.19.1.4

hwOntMgPstnCTPOrder1stPacketPeriod

Enumerationr/w

Enumerated Values:

1	time10ms
2	time15ms
3	time20ms
4	time25ms
5	time30ms

.1.3.6.1.4.1.2011.6.36.11.19.1.5

hwOntMgPstnCTPOrder1stSilenceFlag

silence suppression of order 1. It is valid for GPON ONT and invalid for EPON ONT.
Options:
1.off(1) -indicates the silence suppression is off
2.on(2) -indicates the silence suppression is on
Defalut: off(1)

Enumerationr/w

Enumerated Values:

1	off
2	on

.1.3.6.1.4.1.2011.6.36.11.19.1.6

hwOntMgPstnCTPOrder2stCodec

codec of order 2. It is valid for GPON ONT and invalid for EPON ONT.
defalut: 0

Integer32r/w

Constraints:
range: 0-95
range: 255-255

.1.3.6.1.4.1.2011.6.36.11.19.1.7

hwOntMgPstnCTPOrder2stPacketPeriod

Enumerationr/w

Enumerated Values:

1	time10ms
2	time15ms
3	time20ms
4	time25ms
5	time30ms

.1.3.6.1.4.1.2011.6.36.11.19.1.8

hwOntMgPstnCTPOrder2stSilenceFlag

silence suppression of order 2. It is valid for GPON ONT and invalid for EPON ONT.
Options:
1.off(1) -indicates the silence suppression is off
2.on(2) -indicates the silence suppression is on
Defalut: off(1)

Enumerationr/w

Enumerated Values:

1	off
2	on

.1.3.6.1.4.1.2011.6.36.11.19.1.9

hwOntMgPstnCTPOrder3stCodec

codec of order 3. It is valid for GPON ONT and invalid for EPON ONT.
defalut: 18

Integer32r/w

Constraints:
range: 0-95
range: 255-255

.1.3.6.1.4.1.2011.6.36.11.19.1.10

hwOntMgPstnCTPOrder3stPacketPeriod

Enumerationr/w

Enumerated Values:

1	time10ms
2	time15ms
3	time20ms
4	time25ms
5	time30ms

.1.3.6.1.4.1.2011.6.36.11.19.1.11

hwOntMgPstnCTPOrder3stSilenceFlag

silence suppression of order 3. It is valid for GPON ONT and invalid for EPON ONT.
Options:
1.off(1) -indicates the silence suppression is off
2.on(2) -indicates the silence suppression is on
Defalut: off(1)

Enumerationr/w

Enumerated Values:

1	off
2	on

.1.3.6.1.4.1.2011.6.36.11.19.1.12

hwOntMgPstnCTPOrder4stCodec

codec of order 4. It is valid for GPON ONT and invalid for EPON ONT.
defalut: 9

Integer32r/w

Constraints:
range: 0-95
range: 255-255

.1.3.6.1.4.1.2011.6.36.11.19.1.13

hwOntMgPstnCTPOrder4stPacketPeriod

packet period of order 4. It is valid for GPON ONT and invalid for EPON ONT.
Options:
1.time10ms(1) -indicates the packet period is 10ms
2.time15ms(2) -indicates the packet period is 15ms
3.time20ms(3) -indicates t…

Enumerationr/w

Enumerated Values:

1	time10ms
2	time15ms
3	time20ms
4	time25ms
5	time30ms

.1.3.6.1.4.1.2011.6.36.11.19.1.14

hwOntMgPstnCTPOrder4stSilenceFlag

silence suppression of order 4. It is valid for GPON ONT and invalid for EPON ONT.
Options:
1.off(1) -indicates the silence suppression is off
2.on(2) -indicates the silence suppression is on
Defalut: off(1)

Enumerationr/w

Enumerated Values:

1	off
2	on

.1.3.6.1.4.1.2011.6.36.11.19.1.15

hwOntMgPstnCTPRowStatus

Options:
1.active(1) -indicates active
2.notInService(2) -indicates not in service
3.notReady(3) -indicates not ready
4.createAndGo(4) -indicates create and go
5.createAndWait(5) -indicates crea…

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2011.6.36.11.19.1.16

hwOntSIPCTPConfigTable

table

.1.3.6.1.4.1.2011.6.36.11.20 · 1 row entry · 22 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwOntSIPCTPConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-ONT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-ONT-MIB::hwOntSIPCTPConfigTable'

SIP PSTN CTP Config Table.
The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex.

hwOntSIPCTPConfigEntry row .1.3.6.1.4.1.2011.6.36.11.20.1

SIP PSTN CTP Config Table.
The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex.

Indexes

hwOntSIPCTPDigitmapTemplateIndex

Column Syntax OID

DigitalMap profile index which is bound to POTS user.
If only set digitmap profile(including hwOntSIPCTPDigitmapTemplateIndex and hwOntSIPCTPDigitmapTemplateName) for EPON ONT,
hwVoiceOntPortIndex is invalid(means that…

Integer32r/w

Constraints:
range: 1-64

.1.3.6.1.4.1.2011.6.36.11.20.1.1

hwOntSIPCTPDigitmapTemplateName

DigitalMap profile name which is bound to POTS user.
If only set digitmap profile(including hwOntSIPCTPDigitmapTemplateIndex and hwOntSIPCTPDigitmapTemplateName) for EPON ONT,
hwVoiceOntPortIndex is invalid(means that …

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.6.36.11.20.1.2

hwOntSIPCTPMgID

The SIP MG ID.

Integer32r/w

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.6.36.11.20.1.3

hwOntSIPCTPTelno

SIP user's telephone number of ONT.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2011.6.36.11.20.1.4

hwOntSIPCTPUsername

SIP user's name.

OctetStringr/w

Constraints:
range: 0-50

.1.3.6.1.4.1.2011.6.36.11.20.1.5

hwOntSIPCTPPassword

SIP user's password.

OctetStringr/w

Constraints:
range: 0-24

.1.3.6.1.4.1.2011.6.36.11.20.1.6

hwOntSIPCTPNewServiceRight

SIP user's service right of ONT. It is valid for GPON ONT and invalid for EPON ONT.
Options:
0.callWaiting(0),
1.threeParty(1),
2.callTransfer(2),
3.callHold(3),
4.callPark(4),
5.doNotDisturb(5),
6.conference(6),
7.mess…

Bitsr/w

Enumerated Values:

0	callWaiting
1	threeParty
2	callTransfer
3	callHold
4	callPark
5	doNotDisturb
6	conference
7	messageWaitingIndication
8	hotline
9	hotdelay

.1.3.6.1.4.1.2011.6.36.11.20.1.7

hwOntSIPCTPHotlineUri

SIP user's hot line number(URI). It is valid for GPON ONT and invalid for EPON ONT.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.6.36.11.20.1.8

hwOntSIPPstnCTPCodecSelect

Ont SIP Pstn user's selected codec. It is valid for GPON ONT and invalid for EPON ONT.
Options:
1.baseOnUser(1) -indicates the codec is base-on-user
2.baseOnMg(2) -indicates the codec is base-on-mg
Defalut: baseOn…

Enumerationr/w

Enumerated Values:

1	baseOnUser
2	baseOnMg

.1.3.6.1.4.1.2011.6.36.11.20.1.9

hwOntSIPPstnCTPOrder1stCodec

codec of order 1. It is valid for GPON ONT and invalid for EPON ONT.
defalut: 8

Integer32r/w

Constraints:
range: 0-95
range: 255-255

.1.3.6.1.4.1.2011.6.36.11.20.1.10

hwOntSIPPstnCTPOrder1stPacketPeriod

Enumerationr/w

Enumerated Values:

1	time10ms
2	time15ms
3	time20ms
4	time25ms
5	time30ms

.1.3.6.1.4.1.2011.6.36.11.20.1.11

hwOntSIPPstnCTPOrder1stSilenceFlag

Enumerationr/w

Enumerated Values:

1	off
2	on

.1.3.6.1.4.1.2011.6.36.11.20.1.12

hwOntSIPPstnCTPOrder2stCodec

codec of order 2. It is valid for GPON ONT and invalid for EPON ONT.
defalut: 0

Integer32r/w

Constraints:
range: 0-95
range: 255-255

.1.3.6.1.4.1.2011.6.36.11.20.1.13

hwOntSIPPstnCTPOrder2stPacketPeriod

Enumerationr/w

Enumerated Values:

1	time10ms
2	time15ms
3	time20ms
4	time25ms
5	time30ms

.1.3.6.1.4.1.2011.6.36.11.20.1.14

hwOntSIPPstnCTPOrder2stSilenceFlag

Enumerationr/w

Enumerated Values:

1	off
2	on

.1.3.6.1.4.1.2011.6.36.11.20.1.15

hwOntSIPPstnCTPOrder3stCodec

codec of order 3. It is valid for GPON ONT and invalid for EPON ONT.
defalut: 18

Integer32r/w

Constraints:
range: 0-95
range: 255-255

.1.3.6.1.4.1.2011.6.36.11.20.1.16

hwOntSIPPstnCTPOrder3stPacketPeriod

Enumerationr/w

Enumerated Values:

1	time10ms
2	time15ms
3	time20ms
4	time25ms
5	time30ms

.1.3.6.1.4.1.2011.6.36.11.20.1.17

hwOntSIPPstnCTPOrder3stSilenceFlag

Enumerationr/w

Enumerated Values:

1	off
2	on

.1.3.6.1.4.1.2011.6.36.11.20.1.18

hwOntSIPPstnCTPOrder4stCodec

codec of order 4. It is valid for GPON ONT and invalid for EPON ONT.
defalut: 9

Integer32r/w

Constraints:
range: 0-95
range: 255-255

.1.3.6.1.4.1.2011.6.36.11.20.1.19

hwOntSIPPstnCTPOrder4stPacketPeriod

Enumerationr/w

Enumerated Values:

1	time10ms
2	time15ms
3	time20ms
4	time25ms
5	time30ms

.1.3.6.1.4.1.2011.6.36.11.20.1.20

hwOntSIPPstnCTPOrder4stSilenceFlag

Enumerationr/w

Enumerated Values:

1	off
2	on

.1.3.6.1.4.1.2011.6.36.11.20.1.21

hwOntSIPCTPRowStatus

Options:
1.active(1) -indicates active
2.notInService(2) -indicates not in service
3.notReady(3) -indicates not ready
4.createAndGo(4) -indicates create and go
5.createAndWait(5) -indicates crea…

hwOntDigitMapTemplateIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2011.6.36.11.20.1.22

hwOntDigitMapBodyTable

table

.1.3.6.1.4.1.2011.6.36.11.21 · 1 row entry · 3 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwOntDigitMapBodyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-ONT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-ONT-MIB::hwOntDigitMapBodyTable'

The digitmap body table.
The indexes of this table are hwOntDigitMapTemplateIndex

hwOntDigitMapBodyEntry row .1.3.6.1.4.1.2011.6.36.11.21.1

The digitmap body table.
The indexes of this entry are hwOntDigitMapTemplateIndex

Indexes

Column	Syntax	OID
hwOntDigitMapBodyLength The digitmap body length.	Integer32r/w Constraints: `range: 0-65535`	`.1.3.6.1.4.1.2011.6.36.11.21.1.1`
hwOntDigitMapBodySliceNo The digitmap body slice. The high 8bits indicates total slice number. The low 8bits indicates current slice serial number(begin with 0).	Integer32r/w Constraints: `range: 0-65535`	`.1.3.6.1.4.1.2011.6.36.11.21.1.2`
hwOntDigitMapBodyString The digitmap body string.	OctetStringr/w Constraints: `range: 0-8191`	`.1.3.6.1.4.1.2011.6.36.11.21.1.3`

hwOntRecentCallRecordsTable

table

.1.3.6.1.4.1.2011.6.36.11.22 · 1 row entry · 14 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwOntRecentCallRecordsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-ONT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-ONT-MIB::hwOntRecentCallRecordsTable'

The ONT recent call records table.
The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex, hwOntRecentCallRecordIndex

hwOntRecentCallRecordsEntry row .1.3.6.1.4.1.2011.6.36.11.22.1

The ONT recent call records table.
The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex, hwOntRecentCallRecordIndex

Indexes

hwVoiceIfIndex hwVoiceOntIndex hwVoiceOntPortIndex hwOntRecentCallRecordIndex

Column Syntax OID

hwOntRecentCallRecordIndex

Indicates the index of the call record. If the index is 1, it indicates the last call that has ended on the port.
If this index is 2, it indicates the penultimate call that has ended on the port.

Integer32

Constraints:
range: 1-20

.1.3.6.1.4.1.2011.6.36.11.22.1.1

hwOntRecentCallStartDate

Indicates the start date of the call. 'AAAABBCC' indicates the date, among which, 'AAAA' indicates the year, 'BB' indicates the month, and 'CC' indicates the day.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.36.11.22.1.2

hwOntRecentCallStartTime

Indicates the start time of the call. 'AABBCCDD' indicates the time, among which, 'AA' indicates the hour, 'BB' indicates the minute, 'CC' indicates the second, 'DD' is unused and reserved.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.36.11.22.1.3

hwOntRecentCallDuration

Indicates the duration of the call (unit: second).

hwOntRecentCallPacketsSent

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.36.11.22.1.4

hwOntRecentCallType

Indicates the type of the call.
Options:
1.outgoingCall(1) -indicates the call is a outgoing call
2.incomingCall(2) -indicates the call is a incoming call

Enumeration

Enumerated Values:

1	outgoingCall
2	incomingCall

.1.3.6.1.4.1.2011.6.36.11.22.1.5

hwOntRecentCallCodec

Indicates the codec used in the call. Codec points are assigned as follows:
0: G.711U
1: Reserved
2: G.726
3: GSM
4: G.723
5: DVI4-8K
6: DVI4-16K
7: LPC
8: G.711A
9: G.722
10: L16-2 channels
11: L16-1 channels
12: QCELP…

Integer32

Constraints:
range: 0-18
range: 250-250

.1.3.6.1.4.1.2011.6.36.11.22.1.6

hwOntRecentCallerNumber

Indicates the calling number.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.6.36.11.22.1.7

hwOntRecentCalleeNumber

Indicates the called number.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.6.36.11.22.1.8

Indicates the number of packets sent during the call..

hwOntRecentCallPacketsReceived

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.36.11.22.1.9

Indicates the number of packets received during the call.

hwOntRecentCallPacketsLost

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.36.11.22.1.10

Indicates the number of packets discarded during the call.

hwOntRecentCallRoundTripDelay

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.36.11.22.1.11

Indicates the loop delay of the call (unit: ms).

hwOntRecentCallRcvInterArrivJitter

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.36.11.22.1.12

Indicates the jitter of the call in the Rx direction (unit: ms).

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.36.11.22.1.13

hwOntRecentCallMosLq

Indicates the average MOS value of the call (this value has been increased by 10 times).

hwOntVoipToneProfileIndex hwOntVoipToneIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.36.11.22.1.14

hwOntVoipToneTable

table

.1.3.6.1.4.1.2011.6.36.11.24 · 1 row entry · 81 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwOntVoipToneTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-ONT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-ONT-MIB::hwOntVoipToneTable'

The ONT VoIP tone table.
The indexes of this table are hwOntVoipToneProfileIndex, hwOntVoipToneIndex

hwOntVoipToneEntry row .1.3.6.1.4.1.2011.6.36.11.24.1

The ONT VoIP tone table.
The indexes of this entry are hwOntVoipToneProfileIndex, hwOntVoipToneIndex

Indexes

Column Syntax OID

hwOntVoipToneProfileIndex

Indicates the index of the voip ont profile.

Unsigned32

Constraints:
range: 1-8

.1.3.6.1.4.1.2011.6.36.11.24.1.1

hwOntVoipToneIndex

Indicates the index of the ont voip tone.
Options:
1. Busy
2. Confirmation
3. Dial
4. Message waiting
5. Off hook warning (receiver off hook)
6. Ringback (audible ring)
7. Reorder
8. Stutter dial
9. Call waiting 1…

Unsigned32

Constraints:
range: 1-255

.1.3.6.1.4.1.2011.6.36.11.24.1.2

hwOntVoipToneCadence1Freq1

Indicates the tone frequency 1 used by cadence 1, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is configured.
Dual-frequency tone: freq1 and f…

Integer32r/w

Constraints:
range: 0-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.3

hwOntVoipToneCadence1Freq2

Indicates the tone frequency 2 used by cadence 1, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is configured.
Dual-frequency tone: freq1 and f…

Integer32r/w

Constraints:
range: 0-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.4

hwOntVoipToneCadence1Freq3

Indicates the tone frequency 3 used by cadence 1, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is configured.
Dual-frequency tone: freq1 and f…

Integer32r/w

Constraints:
range: 0-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.5

hwOntVoipToneCadence1Freq4

Indicates the tone frequency 4 used by cadence 1, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is configured.
Dual-frequency tone: freq1 and f…

Integer32r/w

Constraints:
range: 0-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.6

hwOntVoipToneCadence1Level1

Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. Three additional pairs of frequency-power components may be speci…

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.24.1.7

hwOntVoipToneCadence1Level2

Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optional.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.24.1.8

hwOntVoipToneCadence1Level3

Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optional.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.24.1.9

hwOntVoipToneCadence1Level4

Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optional.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.24.1.10

hwOntVoipToneCadence1ModulationFreq

The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0.
This parameter is optional.

Integer32r/w

Constraints:
range: 0-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.11

hwOntVoipToneCadence1ModulationLevel

The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0.
This parameter is optional.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.24.1.12

hwOntVoipToneCadence1OnTime

Indicates the tone on duration of cadence 1. Value -1 indicates that the ringing duration is invalid or is not set.
Unit: millisecond (ms).
This parameter is mandatory.

Integer32r/w

Constraints:
range: -1--1
range: 1-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.13

hwOntVoipToneCadence1OffTime

Indicates the tone off duration of cadence 1. If the tone is off, the frequency and power fields are not meaningful. Value -1 indicates that the ringing duration is invalid or is not set.
Unit: millisecond (ms).
This p…

Integer32r/w

Constraints:
range: -1--1
range: 1-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.14

hwOntVoipToneCadence1RepeatTimes

Indicates the times of playing cadence 1. If this parameter is set, the cadence is played for the specified times according to the ratio of ontime to offtime.
This parameter is optional.
Default: 1

Unsigned32r/w

Constraints:
range: 1-8

.1.3.6.1.4.1.2011.6.36.11.24.1.15

hwOntVoipToneCadence2Freq1

Indicates the tone frequency 1 used by cadence 2, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is configured.
Dual-frequency tone: freq1 and f…

Integer32r/w

Constraints:
range: 0-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.16

hwOntVoipToneCadence2Freq2

Indicates the tone frequency 2 used by cadence 2, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is configured.
Dual-frequency tone: freq1 and f…

Integer32r/w

Constraints:
range: 0-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.17

hwOntVoipToneCadence2Freq3

Indicates the tone frequency 3 used by cadence 2, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is configured.
Dual-frequency tone: freq1 and f…

Integer32r/w

Constraints:
range: 0-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.18

hwOntVoipToneCadence2Freq4

Indicates the tone frequency 4 used by cadence 2, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is configured.
Dual-frequency tone: freq1 and f…

Integer32r/w

Constraints:
range: 0-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.19

hwOntVoipToneCadence2Level1

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.24.1.20

hwOntVoipToneCadence2Level2

Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optional.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.24.1.21

hwOntVoipToneCadence2Level3

Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optional.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.24.1.22

hwOntVoipToneCadence2Level4

Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optional.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.24.1.23

hwOntVoipToneCadence2ModulationFreq

The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0.
This parameter is optional.

Integer32r/w

Constraints:
range: 0-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.24

hwOntVoipToneCadence2ModulationLevel

The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0.
This parameter is optional.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.24.1.25

hwOntVoipToneCadence2OnTime

Indicates the tone on duration of cadence 2. Value -1 indicates that the ringing duration is invalid or is not set.
Unit: millisecond (ms).
This parameter is optional.

Integer32r/w

Constraints:
range: -1--1
range: 1-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.26

hwOntVoipToneCadence2OffTime

Indicates the tone off duration of cadence 2. If the tone is off, the frequency and power fields are not meaningful. Value -1 indicates that the ringing duration is invalid or is not set.
Unit: millisecond (ms).
This p…

Integer32r/w

Constraints:
range: -1--1
range: 1-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.27

hwOntVoipToneCadence2RepeatTimes

Indicates the times of playing cadence 2. If this parameter is set, the cadence is played for the specified times according to the ratio of ontime to offtime.
This parameter is optional.
Default: 1

Unsigned32r/w

Constraints:
range: 1-8

.1.3.6.1.4.1.2011.6.36.11.24.1.28

hwOntVoipToneCadence3Freq1

Indicates the tone frequency 1 used by cadence 3, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is configured.
Dual-frequency tone: freq1 and f…

Integer32r/w

Constraints:
range: 0-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.29

hwOntVoipToneCadence3Freq2

Indicates the tone frequency 2 used by cadence 3, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is configured.
Dual-frequency tone: freq1 and f…

Integer32r/w

Constraints:
range: 0-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.30

hwOntVoipToneCadence3Freq3

Indicates the tone frequency 3 used by cadence 3, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is configured.
Dual-frequency tone: freq1 and f…

Integer32r/w

Constraints:
range: 0-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.31

hwOntVoipToneCadence3Freq4

Indicates the tone frequency 4 used by cadence 3, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is configured.
Dual-frequency tone: freq1 and f…

Integer32r/w

Constraints:
range: 0-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.32

hwOntVoipToneCadence3Level1

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.24.1.33

hwOntVoipToneCadence3Level2

Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optional.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.24.1.34

hwOntVoipToneCadence3Level3

Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optional.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.24.1.35

hwOntVoipToneCadence3Level4

Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optional.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.24.1.36

hwOntVoipToneCadence3ModulationFreq

The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0.
This parameter is optional.

Integer32r/w

Constraints:
range: 0-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.37

hwOntVoipToneCadence3ModulationLevel

The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0.
This parameter is optional.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.24.1.38

hwOntVoipToneCadence3OnTime

Indicates the tone on duration of cadence 3. Value -1 indicates that the ringing duration is invalid or is not set.
Unit: millisecond (ms).
This parameter is optional.

Integer32r/w

Constraints:
range: -1--1
range: 1-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.39

hwOntVoipToneCadence3OffTime

Indicates the tone off duration of cadence 3. If the tone is off, the frequency and power fields are not meaningful. Value -1 indicates that the ringing duration is invalid or is not set.
Unit: millisecond (ms).
This p…

Integer32r/w

Constraints:
range: -1--1
range: 1-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.40

hwOntVoipToneCadence3RepeatTimes

Indicates the times of playing cadence 3. If this parameter is set, the cadence is played for the specified times according to the ratio of ontime to offtime.
This parameter is optional.
Default: 1

Unsigned32r/w

Constraints:
range: 1-8

.1.3.6.1.4.1.2011.6.36.11.24.1.41

hwOntVoipToneCadence4Freq1

Indicates the tone frequency 1 used by cadence 4, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is configured.
Dual-frequency tone: freq1 and f…

Integer32r/w

Constraints:
range: 0-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.42

hwOntVoipToneCadence4Freq2

Indicates the tone frequency 2 used by cadence 4, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is configured.
Dual-frequency tone: freq1 and f…

Integer32r/w

Constraints:
range: 0-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.43

hwOntVoipToneCadence4Freq3

Indicates the tone frequency 3 used by cadence 4, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is configured.
Dual-frequency tone: freq1 and f…

Integer32r/w

Constraints:
range: 0-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.44

hwOntVoipToneCadence4Freq4

Indicates the tone frequency 4 used by cadence 4, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is configured.
Dual-frequency tone: freq1 and f…

Integer32r/w

Constraints:
range: 0-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.45

hwOntVoipToneCadence4Level1

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.24.1.46

hwOntVoipToneCadence4Level2

Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optional.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.24.1.47

hwOntVoipToneCadence4Level3

Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optional.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.24.1.48

hwOntVoipToneCadence4Level4

Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optional.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.24.1.49

hwOntVoipToneCadence4ModulationFreq

The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0.
This parameter is optional.

Integer32r/w

Constraints:
range: 0-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.50

hwOntVoipToneCadence4ModulationLevel

The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0.
This parameter is optional.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.24.1.51

hwOntVoipToneCadence4OnTime

Indicates the tone on duration of cadence 4. Value -1 indicates that the ringing duration is invalid or is not set.
Unit: millisecond (ms).
This parameter is optional.

Integer32r/w

Constraints:
range: -1--1
range: 1-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.52

hwOntVoipToneCadence4OffTime

Indicates the tone off duration of cadence 4. If the tone is off, the frequency and power fields are not meaningful. Value -1 indicates that the ringing duration is invalid or is not set.
Unit: millisecond (ms).
This p…

Integer32r/w

Constraints:
range: -1--1
range: 1-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.53

hwOntVoipToneCadence4RepeatTimes

Indicates the times of playing cadence 4. If this parameter is set, the cadence is played for the specified times according to the ratio of ontime to offtime.
This parameter is optional.
Default: 1

Unsigned32r/w

Constraints:
range: 1-8

.1.3.6.1.4.1.2011.6.36.11.24.1.54

hwOntVoipToneCadence5Freq1

Indicates the tone frequency 1 used by cadence 5, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is configured.
Dual-frequency tone: freq1 and f…

Integer32r/w

Constraints:
range: 0-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.55

hwOntVoipToneCadence5Freq2

Indicates the tone frequency 2 used by cadence 5, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is configured.
Dual-frequency tone: freq1 and f…

Integer32r/w

Constraints:
range: 0-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.56

hwOntVoipToneCadence5Freq3

Indicates the tone frequency 3 used by cadence 5, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is configured.
Dual-frequency tone: freq1 and f…

Integer32r/w

Constraints:
range: 0-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.57

hwOntVoipToneCadence5Freq4

Indicates the tone frequency 4 used by cadence 5, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is configured.
Dual-frequency tone: freq1 and f…

Integer32r/w

Constraints:
range: 0-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.58

hwOntVoipToneCadence5Level1

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.24.1.59

hwOntVoipToneCadence5Level2

Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optional.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.24.1.60

hwOntVoipToneCadence5Level3

Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optional.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.24.1.61

hwOntVoipToneCadence5Level4

Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optional.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.24.1.62

hwOntVoipToneCadence5ModulationFreq

The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0.
This parameter is optional.

Integer32r/w

Constraints:
range: 0-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.63

hwOntVoipToneCadence5ModulationLevel

The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0.
This parameter is optional.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.24.1.64

hwOntVoipToneCadence5OnTime

Indicates the tone on duration of cadence 5. Value -1 indicates that the ringing duration is invalid or is not set.
Unit: millisecond (ms).
This parameter is optional.

Integer32r/w

Constraints:
range: -1--1
range: 1-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.65

hwOntVoipToneCadence5OffTime

Indicates the tone off duration of cadence 5. If the tone is off, the frequency and power fields are not meaningful. Value -1 indicates that the ringing duration is invalid or is not set.
Unit: millisecond (ms).
This p…

Integer32r/w

Constraints:
range: -1--1
range: 1-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.66

hwOntVoipToneCadence5RepeatTimes

Indicates the times of playing cadence 5. If this parameter is set, the cadence is played for the specified times according to the ratio of ontime to offtime.
This parameter is optional.
Default: 1

Unsigned32r/w

Constraints:
range: 1-8

.1.3.6.1.4.1.2011.6.36.11.24.1.67

hwOntVoipToneCadence6Freq1

Indicates the tone frequency 1 used by cadence 6, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is configured.
Dual-frequency tone: freq1 and f…

Integer32r/w

Constraints:
range: 0-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.68

hwOntVoipToneCadence6Freq2

Indicates the tone frequency 2 used by cadence 6, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is configured.
Dual-frequency tone: freq1 and f…

Integer32r/w

Constraints:
range: 0-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.69

hwOntVoipToneCadence6Freq3

Indicates the tone frequency 3 used by cadence 6, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is configured.
Dual-frequency tone: freq1 and f…

Integer32r/w

Constraints:
range: 0-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.70

hwOntVoipToneCadence6Freq4

Indicates the tone frequency 4 used by cadence 6, which can be single-frequency, dual-frequency, three-frequency, and four-frequency.
Single-frequency tone: Only freq1 is configured.
Dual-frequency tone: freq1 and f…

Integer32r/w

Constraints:
range: 0-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.71

hwOntVoipToneCadence6Level1

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.24.1.72

hwOntVoipToneCadence6Level2

Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optional.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.24.1.73

hwOntVoipToneCadence6Level3

Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optional.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.24.1.74

hwOntVoipToneCadence6Level4

Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution.
This parameter is optional.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.24.1.75

hwOntVoipToneCadence6ModulationFreq

The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0.
This parameter is optional.

Integer32r/w

Constraints:
range: 0-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.76

hwOntVoipToneCadence6ModulationLevel

The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0.
This parameter is optional.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.36.11.24.1.77

hwOntVoipToneCadence6OnTime

Indicates the tone on duration of cadence 6. Value -1 indicates that the ringing duration is invalid or is not set.
Unit: millisecond (ms).
This parameter is optional.

Integer32r/w

Constraints:
range: -1--1
range: 1-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.78

hwOntVoipToneCadence6OffTime

Indicates the tone off duration of cadence 6. If the tone is off, the frequency and power fields are not meaningful. Value -1 indicates that the ringing duration is invalid or is not set.
Unit: millisecond (ms).
This p…

Integer32r/w

Constraints:
range: -1--1
range: 1-65534

.1.3.6.1.4.1.2011.6.36.11.24.1.79

hwOntVoipToneCadence6RepeatTimes

Indicates the times of playing cadence 6. If this parameter is set, the cadence is played for the specified times according to the ratio of ontime to offtime.
This parameter is optional.
Default: 1

Unsigned32r/w

Constraints:
range: 1-8

.1.3.6.1.4.1.2011.6.36.11.24.1.80

hwOntVoipToneRowStatus

Options:
1.active(1) -indicates active
2.notInService(2) -indicates not in service
3.notReady(3) -indicates not ready
4.createAndGo(4) -indicates create and go
5.createAndWait(5) -indicates crea…

hwOntVoipRingProfileIndex hwOntVoipRingIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2011.6.36.11.24.1.81

hwOntVoipRingTable

table

.1.3.6.1.4.1.2011.6.36.11.25 · 1 row entry · 9 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwOntVoipRingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-ONT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-ONT-MIB::hwOntVoipRingTable'

The ONT VoIP ring table.
The indexes of this entry are hwOntVoipRingProfileIndex, hwOntVoipRingIndex

hwOntVoipRingEntry row .1.3.6.1.4.1.2011.6.36.11.25.1

The ONT VoIP ring table.
The indexes of this entry are hwOntVoipRingProfileIndex, hwOntVoipRingIndex

Indexes

Column Syntax OID

hwOntVoipRingProfileIndex

Indicates the index of the ont voip ring profile.

Unsigned32

Constraints:
range: 1-8

.1.3.6.1.4.1.2011.6.36.11.25.1.1

hwOntVoipRingIndex

Indicates the index of the ont voip ring.
Options:
1. Default
2. Splash
3..223. Reserved
224..255. Vendor-specific codes, not to be standardized

Unsigned32

Constraints:
range: 1-255

.1.3.6.1.4.1.2011.6.36.11.25.1.2

hwOntVoipRingCadence1OnTime

Indicates the ringing on duration of cadence 1. Unit: millisecond (ms). Value -1 indicates that the ringing duration is invalid or is not set.
This parameter is mandatory.

Integer32r/w

Constraints:
range: -1--1
range: 1-65534

.1.3.6.1.4.1.2011.6.36.11.25.1.3

hwOntVoipRingCadence1OffTime

Indicates the ringing off duration of cadence 1. Unit: millisecond (ms). Value -1 indicates that the ringing stop duration is invalid or is not set.
This parameter is optional.

Integer32r/w

Constraints:
range: -1--1
range: 1-65534

.1.3.6.1.4.1.2011.6.36.11.25.1.4

hwOntVoipRingCadence2OnTime

Indicates the ringing on duration of cadence 2. Unit: millisecond (ms). Value -1 indicates that the ringing duration is invalid or is not set.
This parameter is optional.

Integer32r/w

Constraints:
range: -1--1
range: 1-65534

.1.3.6.1.4.1.2011.6.36.11.25.1.5

hwOntVoipRingCadence2OffTime

Indicates the ringing off duration of cadence 2. Unit: millisecond (ms). Value -1 indicates that the ringing stop duration is invalid or is not set.
This parameter is optional.

Integer32r/w

Constraints:
range: -1--1
range: 1-65534

.1.3.6.1.4.1.2011.6.36.11.25.1.6

hwOntVoipRingCadence3OnTime

Indicates the ringing on duration of cadence 3. Unit: millisecond (ms). Value -1 indicates that the ringing duration is invalid or is not set.
This parameter is optional.

Integer32r/w

Constraints:
range: -1--1
range: 1-65534

.1.3.6.1.4.1.2011.6.36.11.25.1.7

hwOntVoipRingCadence3OffTime

Indicates the ringing off duration of cadence 3. Unit: millisecond (ms). Value -1 indicates that the ringing stop duration is invalid or is not set.
This parameter is optional.

Integer32r/w

Constraints:
range: -1--1
range: 1-65534

.1.3.6.1.4.1.2011.6.36.11.25.1.8

hwOntVoipRingRowStatus

Options:
1.active(1) -indicates active
2.notInService(2) -indicates not in service
3.notReady(3) -indicates not ready
4.createAndGo(4) -indicates create and go
5.createAndWait(5) -indicates crea…

hwOntVoipSignalProfileIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2011.6.36.11.25.1.9

hwOntVoipSignalProfileTable

table

.1.3.6.1.4.1.2011.6.36.11.26 · 1 row entry · 6 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwOntVoipSignalProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-ONT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-ONT-MIB::hwOntVoipSignalProfileTable'

The ONT VoIP signal profile table.
The index of this table is hwOntVoipSignalProfileIndex.

hwOntVoipSignalProfileEntry row .1.3.6.1.4.1.2011.6.36.11.26.1

The ONT VoIP signal profile table.
The index of this entry is hwOntVoipSignalProfileIndex.

Indexes

Column Syntax OID

hwOntVoipSignalProfileIndex

Indicates the index of the ONT VoIP signal profile.

Unsigned32

Constraints:
range: 1-8

.1.3.6.1.4.1.2011.6.36.11.26.1.1

hwOntVoipSignalProfileName

Indicates the name of the ONT VoIP signal profile.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.6.36.11.26.1.2

hwOntVoipSignalProfileBinNum

Indicates the number of ONT bound with ONT VoIP signal profile.

hwOntVoipSignalProfileCommit

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.36.11.26.1.3

Indicates the ONT VoIP signal profile Configuration Commit.
Options:
1. commitExecute(1) - Execute the ONT VoIP signal profile configuration commit
2. clearResult(2) - Clear the commit result
3. invalid(-1)…

Enumerationr/w

Enumerated Values:

-1	invalid
1	commitExecute
2	clearResult

.1.3.6.1.4.1.2011.6.36.11.26.1.4

hwOntVoipSignalProfileCommitResult

Indicates the commit result of a ONT VoIP signal profile, the aging time of the result is 20s.
Options:
1. success(1) - Indicates that the commit result is success
2. fail(2) - Indicates that the commit result is…

Enumeration

Enumerated Values:

-1	invalid
1	success
2	fail
3	operating

.1.3.6.1.4.1.2011.6.36.11.26.1.5

hwOntVoipSignalProfileRowStatus

Options:
1.active(1) -indicates active
2.notInService(2) -indicates not in service
3.notReady(3) -indicates not ready
4.createAndGo(4) -indicates create and go
5.createAndWait(5) -indicates crea…