HUAWEI-VOIP-MGCP-MIB Table View

This table is used to set the MGCP dynamic parameters.
The index of this table is hwMgcpParaMgId.

hwMgcpParaEntry row .1.3.6.1.4.1.2011.6.36.1.15.1

This table is used to set the MGCP dynamic parameters.
The index of this entry is hwMgcpParaMgId.

Indexes

hwMgcpParaMgId

Column	Syntax	OID
hwMgcpParaMgId Indicates the MG ID.	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2011.6.36.1.15.1.1
hwMgcpParaRetranIntervalTimer Indicates the maximum re-transmission interval of MGCP messages.	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.2011.6.36.1.15.1.2
hwMgcpParaMaxRetranTimes Indicates the maximum re-transmission times of MGCP messages.	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.2011.6.36.1.15.1.3
hwMgcpParaProvRspDelay Indicates the delay of the MGCP stack timer for receiving the provisional responses.	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.2011.6.36.1.15.1.4
hwMgcpParaAtMostOnceTimer Indicates the length of the At-most-once timer of the MGCP stack.	Integer32r/w Constraints: range: 1-60	.1.3.6.1.4.1.2011.6.36.1.15.1.5
hwMgcpParaEnbProyRsp Indicates whether the MGCP stack supports transmitting provisional responses. Options: 1. no(1) - indicates that the MGCP stack not supports transmitting provisional responses 1. yes(2) - indicates that the MGCP stack s…	Enumerationr/w Enumerated Values: 1 no 2 yes	.1.3.6.1.4.1.2011.6.36.1.15.1.6
hwMgcpParaEnbSdpTransParent Indicates whether the MGCP stack supports partial transparent transmission of the Session Description Protocol (SDP). Options: 1. no(1) - indicates that the MGCP stack not supports partial transparent transmission of th…	Enumerationr/w Enumerated Values: 1 no 2 yes	.1.3.6.1.4.1.2011.6.36.1.15.1.7

This table is used to config the MGCP media gateway.
The index of this table is hwMgcpMedGwyId.

hwMgcpMedGwyConfigEntry row .1.3.6.1.4.1.2011.6.36.1.37.1

This table is used to config the MGCP media gateway.
The index of this entry is hwMgcpMedGwyId.

Indexes

hwMgcpMedGwyId

Column	Syntax	OID
hwMgcpMedGwyId Media Gateway ID	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2011.6.36.1.37.1.1
hwMgcpMedGwyDomainName Domain name Parameter 0: clears the value of the parameter	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2011.6.36.1.37.1.2
hwMgcpMedGwyDesc Indicates the interface description.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2011.6.36.1.37.1.3
hwMgcpMedGwyIPAddress Indicates the IP address that the Media Gateway Controller will use to communicate with the Media Gateway.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.36.1.37.1.4
hwMgcpMedGwyUDPPort Indicates the UDP port that the Media Gateway Controller will use to communicate with the Media Gateway. The value 65535 is returned if the entry is invalid. The valid value is from 1 to 4999 in MD5500 and from 1 to 163…	Integer32r/w Constraints: range: 2000-3000 range: 65535-65535	.1.3.6.1.4.1.2011.6.36.1.37.1.5
hwMgcpMedGwyCodeType Indicates the coding type. Options: 1.txt(1)-indicates that the coding type is text	Enumeration Enumerated Values: 1 txt	.1.3.6.1.4.1.2011.6.36.1.37.1.6
hwMgcpMedGwyTransMode Indicates the transmission mode. Options: 1.udp(2)-indicates that the transmission mode is udp	Enumeration Enumerated Values: 2 udp	.1.3.6.1.4.1.2011.6.36.1.37.1.7
hwMgcpMedGwyRegisterKey Indicates the key that is registered with the MGC, and the length of valid key input is from 8 to 32. The key cannot be modified, read, or written by the operator without authority, so the hwMgcpMedGwyRegisterKey and hw…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2011.6.36.1.37.1.8
hwMgcpMedGwyOperKey Indicates the key for operating the MG. The hwMgcpMedGwyOperKey cannot be read or written. The functions of this key are as follows: 1) The hwMgcpMedGwyRegisterKey and hwMgcpMedGwyOperKey must be provided for modifying …	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2011.6.36.1.37.1.9
hwMgcpMedGwyOperKeyNew Indicates the new operation key, and the length of valid key input is from 8 to 32. The hwMgcpMedGwyOperKeyNew is a temporary variable, and cannot be read. If you query one hwMgcpMedGwyOperKeyNew not configured, the sys…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2011.6.36.1.37.1.10
hwMgcpMedGwyAdminStatus Indicates the administrative status for this media gateway control group. Options: 1.up(1)-indicates that the administrative status for this media gateway control group is up 2.down(2)-indicates that the administrative…	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2011.6.36.1.37.1.11
hwMgcpMedGwyOperStatus Indicates the current operational status of the signaling link. Options: 1.up(1)-indicates that the current operational status of the signaling link is up 2.down(2)-indicates that the current operational status of the …	Enumeration Enumerated Values: 1 up 2 down 3 fault 4 waitingAck 5 unknown 6 notStart	.1.3.6.1.4.1.2011.6.36.1.37.1.12
hwMgcpMedGwyRowStatus This is used to create new rows in this table, Modify existing rows, and to delete existing rows.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.36.1.37.1.13
hwMgcpMedGwyLastChange Indicates the value of sysUpTime at the time the associated link entered its current operational status. If the current status was entered prior to the last re-initialization of the local network management subsystem, t…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.36.1.37.1.14
hwMgcpMedGwyAuthMode Indicates the authentication mode. Options: 1.hwmode(1)-indicates that the authentication mode is huawei mode 2.gbmode(2)-indicates that the authentication mode is global mode	Enumerationr/w Enumerated Values: 1 hwmode 2 gbmode	.1.3.6.1.4.1.2011.6.36.1.37.1.15
hwMgcpMedGwyAuthInitialKey Indicates the authentication initial key, and the length of valid key input is from 1 to 16. The size 0 means the parameter is not configured.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.2011.6.36.1.37.1.16
hwMgcpMedGwyAuthMgId Indicates the authentication MG ID and the length input is from 1 to 16. The size 0 means the parameter is not configured.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.2011.6.36.1.37.1.17
hwMgcpMedGwyAuthKey Indicates the authentication initial key.	OctetStringr/w Constraints: range: 1-16	.1.3.6.1.4.1.2011.6.36.1.37.1.18
hwMgcpMedGwy2833Encrypt Indicates the 2833 encryption key and the length of valid key input is from 1 to 16. The size 0 means the parameter is not configured.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.2011.6.36.1.37.1.19
hwMgcpMedGwyCfgHeartBeatTimer Indicates the configured timer of the heartbeat (s).	Integer32r/w Constraints: range: 5-655	.1.3.6.1.4.1.2011.6.36.1.37.1.20
hwMgcpMedGwyIPAddrDhcpClientIndex Dhcp Signal vlan id. The valid value is 1..4093,if the value is -1, the static signal ip will be used.	Integer32r/w Constraints: range: -1--1 range: 1-4093	.1.3.6.1.4.1.2011.6.36.1.37.1.21
hwMgcpMedGwyDynAddrName Dynamic media gateway IP name.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2011.6.36.1.37.1.22
hwMgcpMedGwyCurDynAddrName Current working dynamic media gateway IP name.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2011.6.36.1.37.1.23
hwMgcpMedGwyCurIPAddress Indicates the IP address that the Media Gateway current use to communicate with the Media Gateway Controller.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.36.1.37.1.24

This table is used to config the MGCP media gateway control parameters.
The indexes of this table are hwMgcpMedGwyCtrlGatewayId and hwMgcpMedGwyCtrlIdx.

hwMgcpMedGwyCtrlEntry row .1.3.6.1.4.1.2011.6.36.1.38.1

This table is used to config the MGCP media gateway control parameters.
The indexes of this entry are hwMgcpMedGwyCtrlGatewayId and hwMgcpMedGwyCtrlIdx.

Indexes

hwMgcpMedGwyCtrlGatewayId hwMgcpMedGwyCtrlIdx

Column	Syntax	OID
hwMgcpMedGwyCtrlGatewayId Indicates the MG ID.	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2011.6.36.1.38.1.1
hwMgcpMedGwyCtrlIdx Indicates the MGC index.	Integer32 Constraints: range: 0-2	.1.3.6.1.4.1.2011.6.36.1.38.1.2
hwMgcpMedGwyCtrlIPAddress Indicates the IP address of the Media Gateway Controller. The value 255.255.255.255 is returned if the entry is invalid.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.36.1.38.1.3
hwMgcpMedGwyCtrlDnsName Indicates the DNS name of the MGC. - means clears the value of the parameter.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2011.6.36.1.38.1.4
hwMgcpMedGwyCtrlDnsIp Indicates the IP address that is obtained through the MGC domain name. DEFVAL { false }	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.36.1.38.1.5
hwMgcpMedGwyCtrlPort Indicates the UDP port of the Media Gateway Controller. The value 65535 is returned if the entry is invalid.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2011.6.36.1.38.1.6
hwMgcpMedGwyCtrlAdminStatus Indicates to set the MGC as the active MGC. Options: 1. active(1) -Indicates to set the MGC as the active MGC	Enumerationr/w Enumerated Values: 1 active	.1.3.6.1.4.1.2011.6.36.1.38.1.7
hwMgcpMedGwyCtrlOperStatus Indicates the status of the Media Gateway Controller (and/or) its transportLink. Options: 1. up(1) -indicates that the status of the Media Gateway Controller (and/or) its transportLink is up 2. down(2) -indicates that …	Enumeration Enumerated Values: 1 up 2 down 3 standby	.1.3.6.1.4.1.2011.6.36.1.38.1.8
hwMgcpMedGwyCtrlRowStatus Indicates the row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.36.1.38.1.9
hwMgcpMedGwyCtrlLastChange Indicates the value of sysUpTime at the time the associated link entered its current operational status. If the current status was entered prior to the last re-initialization of the local network management subsystem, t…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.36.1.38.1.10

This table is used to set digitmap.
The index of this table is hwMgcpDigitmapMgId.

hwMgcpDigitmapEntry row .1.3.6.1.4.1.2011.6.36.1.39.1

This table is used to set digitmap.
The index of this entry is hwMgcpDigitmapMgId.

Indexes

hwMgcpDigitmapMgId

Column	Syntax	OID
hwMgcpDigitmapMgId Indicates the MG interface ID.	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2011.6.36.1.39.1.1
hwMgcpDigitmapDualdial Indicates the automatic re-dial digitmap.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.2011.6.36.1.39.1.2
hwMgcpDigitmapOverLoadUrgent Indicates the overload control digitmap.	OctetStringr/w Constraints: range: 0-127	.1.3.6.1.4.1.2011.6.36.1.39.1.3

This table is used to set the software parameters of MGCP media gateway.
The index of this table is hwMgcpMgInterfaceIndex.

hwMgcpMgSoftParameterEntry row .1.3.6.1.4.1.2011.6.36.1.40.1

This table is used to set the software parameters of MGCP media gateway.
The index of this entry is hwMgcpMgInterfaceIndex.

Indexes

hwMgcpMgInterfaceIndex

Column	Syntax	OID
hwMgcpMgInterfaceIndex Indicates the MG interface index.	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2011.6.36.1.40.1.1
hwMgcpMgSoftParameter0deprecated Parameter name index 0. Indicates whether the terminal ID of the MG interface is layered. Options: 1. yes(1) -indicates that the terminal ID of the MG interface is layered 2. no(2) -indicates that the terminal ID of th…	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.2011.6.36.1.40.1.2
hwMgcpMgSoftParameter1 Parameter name index 1. It indicates whether the ongoing calls are maintained after MG is disconnected from MGC. Options: 1. yes(1) -indicates that the ongoing calls are maintained after MG is disconnected from MGC 2. …	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.2011.6.36.1.40.1.3
hwMgcpMgSoftParameter2 Parameter name index 2. It indicates whether the MG interface supports dual homing. Options: 1. yes(1) -indicates that the MG interface supports dual homing 2. no(2) -indicates that the MG interface not supports dual …	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.2011.6.36.1.40.1.4
hwMgcpMgSoftParameter3 Parameter name index 3. It indicates whether the heartbeat message is disabled between MG and MGC. Options: 1. yes(1) -indicates that the heartbeat message is enabled between MG and MGC 2. no(2) -indicates that the hea…	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.2011.6.36.1.40.1.5
hwMgcpMgSoftParameter4 Parameter name index 4. It indicates whether the wildcard is used in registration. Options: 1. yes(1) -indicates that the wildcard is used in registration 2. no(2) -indicates that the wildcard is not used in registrat…	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.2011.6.36.1.40.1.6
hwMgcpMgSoftParameter5 Parameter name index 5. It indicates the MGC type. The value range is 1-9. Options: 1. SOFTSWITCH 2. ZTE 3. NORTEL 4. CISCO 5. SIEMENS 6. SONUS 7. ETG 8. SHANGYANG 9. MARCONI Default: 1	Integer32r/w Constraints: range: 1-9	.1.3.6.1.4.1.2011.6.36.1.40.1.7
hwMgcpMgSoftParameter6 Parameter name index 6. It indicates the maximum threshold of not responding to the transmitted heartbeat message. Default: 3	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.2011.6.36.1.40.1.8
hwMgcpMgSoftParameter7 Parameter name index 7. It indicates whether to support the report that has the MG as the endpoint name. Options: 1. yes(1) -indicates support the report that has the MG as the endpoint name 2. no(2) -indicates not su…	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.2011.6.36.1.40.1.9
hwMgcpMgSoftParameter8deprecated Parameter name index 8. It indicates whether the port fault and auto-block is reported to the MGC. Options: 1. yes(1) -indicates that the port fault and auto-block is reported to the MGC 2. no(2) -indicates that the po…	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.2011.6.36.1.40.1.10
hwMgcpMgSoftParameter9deprecated Parameter name index 9. It is reserved in the system. Options: 1. yes(1) -yes 2. no(2) -no Default: yes(1)	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.2011.6.36.1.40.1.11
hwMgcpMgSoftParameter10 Parameter name index 10. It indicates the point-to-point fault report flag. Options: 1. yes(1) -indicates that the point-to-point fault is reported 2. no(2) -indicates that the port fault and auto-block is not reported…	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.2011.6.36.1.40.1.12
hwMgcpMgSoftParameter11 Parameter name index 11. It indicates the point-to-multipoint fault report flag. Options: 1. yes(1) -indicates that the point-to-multipoint fault is reported 2. no(2) -indicates that the point-to-multipoint fault is no…	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.2011.6.36.1.40.1.13
hwMgcpMgSoftParameter12 Parameter name index 12. It indicates the local block tone type. Options: 1. busyTone(1) -indicates that the local block tone type is busyTone 2. congestionTone(2) -indicates that the local block tone type is congesti…	Enumerationr/w Enumerated Values: 1 busyTone 2 congestionTone 3 muteTone 4 userDefineTone1 5 userDefineTone2	.1.3.6.1.4.1.2011.6.36.1.40.1.14
hwMgcpMgSoftParameter13 Parameter name index 13. It indicates the remote block tone type. Options: 1. busyTone(1) -indicates that the remote block tone type is busyTone 2. congestionTone(2) -indicates that the remote block tone type is cong…	Enumerationr/w Enumerated Values: 1 busyTone 2 congestionTone 3 muteTone 4 userDefineTone1 5 userDefineTone2	.1.3.6.1.4.1.2011.6.36.1.40.1.15
hwMgcpMgSoftParameter14 Parameter name index 14. It indicates the RTP source port filtering switch. Options: 1. filter(1) -indicates that the RTP source port is filter 2. notFilter(2) -indicates that the RTP source port is not filter Default…	Enumerationr/w Enumerated Values: 1 filter 2 notFilter	.1.3.6.1.4.1.2011.6.36.1.40.1.16
hwMgcpMgSoftParameter15 Parameter name index 15. It indicates the length of howl tone<1,65535>. Default:60 Unit: second	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2011.6.36.1.40.1.17
hwMgcpMgSoftParameter16 Parameter name index 16. Indicates whether the timer symbol (T) follows the number string reported by the signaling. Options: 1. yes(1) -indicates that the timer symbol (T) follows the number string reported by the si…	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.2011.6.36.1.40.1.18
hwMgcpMgSoftParameter17 Parameter name index 17. It indicates the duration of the timer for preventing the repeated switching between the data service and voice service after auto-switching data transparent transmission is complete. <0,65534>…	Integer32r/w Constraints: range: 0-65534	.1.3.6.1.4.1.2011.6.36.1.40.1.19
hwMgcpMgSoftParameter18 Parameter name index 18. Indicates whether to actively switch back to the voice service after data transparent transmission is complete. Options: 1. yes(1) -indicates actively switch back to the voice service 2. no(…	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.2011.6.36.1.40.1.20

This table is used to set the digitmap parameters.
The index of this table is hwMgcpDmmParaMgId.

hwMgcpDmmParaEntry row .1.3.6.1.4.1.2011.6.36.1.41.1

This table is used to set the digitmap parameters.
The index of this entry is hwMgcpDmmParaMgId.

Indexes

hwMgcpDmmParaMgId

Column	Syntax	OID
hwMgcpDmmParaMgId Indicates the MG ID.	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2011.6.36.1.41.1.1
hwMgcpDmmParaMgcpTTimer Indicates the length of the DMM MGCP T timer.	Integer32r/w Constraints: range: 1-99	.1.3.6.1.4.1.2011.6.36.1.41.1.2

This table is used to config MGCP terminal ID.
The index of this table is hwMgcpTIDPrefixMgId.

hwMgcpTIDConfigEntry row .1.3.6.1.4.1.2011.6.36.1.42.1

This table is used to config MGCP terminal ID.
The index of this entry is hwMgcpTIDPrefixMgId.

Indexes

hwMgcpTIDPrefixMgId

Column	Syntax	OID
hwMgcpTIDPrefixMgId Media Gateway ID	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2011.6.36.1.42.1.1
hwMgcpBraPrefix Indicates the BRA terminal prefix.	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.2011.6.36.1.42.1.2
hwMgcpPraPrefix Indicates the PRA terminal prefix.	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.2011.6.36.1.42.1.3
hwMgcpPstnPrefix Indicates the PSTN terminal prefix.	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.2011.6.36.1.42.1.4
hwMgcpBraTemplateIndex Indicates the index of the BRA TID profile.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.2011.6.36.1.42.1.5
hwMgcpPraTemplateIndex Indicates the index of the PRA TID profile.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.2011.6.36.1.42.1.6
hwMgcpPstnTemplateIndex Indicates the index of the PSTN TID profile.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.2011.6.36.1.42.1.7
hwMgcpIsNeedToConfigTID Indicates whether the terminal ID needs to be configured for the subscriber. Bit0 (low) to bit31 (high) respectively represent PSTN, BRA, and PRA. The remaining bits are reserved. (It is unavailable in the R17.)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.42.1.8