HUAWEI-VOIP-H248-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
15
Rows
15
Columns
226
hwH248MedGwyConfigTable
table.1.3.6.1.4.1.2011.6.36.1.1
·
1 row entry
·
53 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwH248MedGwyConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-H248-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-H248-MIB::hwH248MedGwyConfigTable'
This table is used to manage H248 media gateway. The index of this table is hwH248MedGwyId.
This table is used to manage H248 media gateway.
The index of this entry is hwH248MedGwyId.
The index of this entry is hwH248MedGwyId.
Indexes
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| hwH248MedGwyIdMedia Gateway ID. | Integer32 Constraints: range: 0-16777215 | .1.3.6.1.4.1.2011.6.36.1.1.1.1 | ||||||||||||||||
| hwH248MedGwyDomainNameIndicates the domain name of the MG, null means clear the value of this parameter. | OctetStringr/w Constraints: range: 0-64 | .1.3.6.1.4.1.2011.6.36.1.1.1.2 | ||||||||||||||||
| hwH248MedGwyDescIndicates the interface description. | OctetStringr/w Constraints: range: 0-32 | .1.3.6.1.4.1.2011.6.36.1.1.1.3 | ||||||||||||||||
| hwH248MedGwySigIPAddress1Indicates the signaling IP address of the MG. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.2011.6.36.1.1.1.4 | ||||||||||||||||
| hwH248MedGwyIPAddress2The second IP address that the Media Gateway Controller will use to communicate with the Media Gateway. The system does not support setting it now. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.2011.6.36.1.1.1.5 | ||||||||||||||||
| hwH248MedGwySigUDPPortSignalling UDP port that the Media Gateway Controller will use to communicate with the Media Gateway. 65535 means this parameter is not configurated. | Integer32r/w Constraints: range: 2900-2999range: 65535-65535 | .1.3.6.1.4.1.2011.6.36.1.1.1.6 | ||||||||||||||||
| hwH248MedGwyProtocolType of the control protocol in use. Options: 1. h248(1) -H.248 | Enumeration Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.1.1.7 | ||||||||||||||||
| hwH248MedGwyCodeTypeIndicates the coding type. Options: 1. txt(1) -text 2. bin(2) -binary | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.1.1.8 | ||||||||||||||||
| hwH248MedGwyTransModeIndicates the transmission mode. Options: 1. noConfig(-1) -not configured 2. tcp(1) -tcp 3. udp(2) -udp 4. alf-udp(3) -udp with alf 5. sctp(4) -sctp | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.1.1.9 | ||||||||||||||||
| hwH248MedGwyRegisterKeyIndicates the key that is registered with the MGC. The key cannot be modified, read, or written by the operator without authority, so the hwH248MedGwyRegisterKey and hwH248MedGwyOperKey must be also provided to query an… | OctetStringr/w Constraints: range: 0-32 | .1.3.6.1.4.1.2011.6.36.1.1.1.10 | ||||||||||||||||
| hwH248MedGwyOperKeyIndicates the key for operating the MG. The hwH248MedGwyOperKey cannot be read. The functions of this key are as follows: 1) The hwH248MedGwyRegisterKey and hwH248MedGwyOperKey must be provided for modifying the hwH248M… | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.2011.6.36.1.1.1.11 | ||||||||||||||||
| hwH248MedGwyOperKeyNewIndicates the new operation key. The hwH248MedGwyOperKeyNew is a temporary variable, and cannot be read. If you query one hwH248MedGwyOperKeyNew, the system always returns a null value. This parameters must be 8..32 cha… | OctetStringr/w Constraints: range: 0-32 | .1.3.6.1.4.1.2011.6.36.1.1.1.12 | ||||||||||||||||
| hwH248MedGwyAdminStatusAdministrative status for this media gateway control group. The default reason code relates to the status is as follows: reset -- ColdBoot(901) shutdown force -- TerminationTakenOutOfService(905) … | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.1.1.13 | ||||||||||||||||
| hwH248MedGwyOperStatusCurrent operational status of the signaling link. Options: 1. up(1) -normal 2. local-closed(2) -local closed 3. fault(3) -fault 4. waiting-ack(4) -wating for ack 5. unknown(5) -unknown 6. not-start(6) -not start 7. remo… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.1.1.14 | ||||||||||||||||
| hwH248MedGwyRowStatusThis is used to create new rows in this table, modify existing rows, and delete existing rows. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.2011.6.36.1.1.1.15 | ||||||||||||||||
| hwH248MedGwyLastChangeThe value of sysUpTime at the time the associated link entered its current operational status. If the current status was entered prior to the last re-initialization of the local network management subsystem, then this o… | SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.2011.6.36.1.1.1.16 | ||||||||||||||||
hwH248MedGwyProfile1obsolete Indicates the name of the first H.248 profile of the MG (including / + version; version is a number). | OctetStringr/w Constraints: range: 1-67 | .1.3.6.1.4.1.2011.6.36.1.1.1.17 | ||||||||||||||||
hwH248MedGwyProfile2obsolete Indicates the name of the second H.248 profile of the MG (including / + version; version is a number). | OctetStringr/w Constraints: range: 1-67 | .1.3.6.1.4.1.2011.6.36.1.1.1.18 | ||||||||||||||||
hwH248MedGwyProfile3obsolete Indicates the name of the third H.248 profile of the MG (including / + version; version is a number). | OctetStringr/w Constraints: range: 1-67 | .1.3.6.1.4.1.2011.6.36.1.1.1.19 | ||||||||||||||||
hwH248MedGwyProfileUsingobsolete Indicates the name of the profile that is currently in use. | OctetString Constraints: range: 1-67 | .1.3.6.1.4.1.2011.6.36.1.1.1.20 | ||||||||||||||||
hwH248MedGwyTopH248Versionobsolete Indicates the latest H.248 version that is supported by the MG. In the P300, this parameter is read-only.Options: 1. v1(1) -version 1 2. v2(2) -version 2 3. v3(3) -version 3 | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.1.1.21 | ||||||||||||||||
| hwH248MedGwyCurH248VersionIndicates the current H.248 version of the MG. Options: 1. v1(1) -version 1 2. v2(2) -version 2 3. v3(3) -version 3 | Enumeration Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.1.1.22 | ||||||||||||||||
| hwH248MedGwyCurUsedDspNumIndicates the count of currently occupied DSPs of the interface. | Integer32 Constraints: range: 0-1000 | .1.3.6.1.4.1.2011.6.36.1.1.1.23 | ||||||||||||||||
| hwH248MedGwyAuthInitialKeyIndicates the authentication initial key. | OctetStringr/w Constraints: range: 1-16 | .1.3.6.1.4.1.2011.6.36.1.1.1.24 | ||||||||||||||||
| hwH248MedGwyAuthMgIdIndicates the authentication MG ID. | OctetStringr/w Constraints: range: 1-16 | .1.3.6.1.4.1.2011.6.36.1.1.1.25 | ||||||||||||||||
| hwH248MedGwyAuthAlgorithmIndicates the authentication encryption algorithm. Options: 1. md5(1) -MD5 | Enumeration Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.1.1.26 | ||||||||||||||||
| hwH248MedGwy2833EncryptIndicates the 2833 encryption key. | OctetStringr/w Constraints: range: 0-16 | .1.3.6.1.4.1.2011.6.36.1.1.1.27 | ||||||||||||||||
| hwH248MedGwyCfgHeartBeatTimerIndicates the configured timer of the initial heartbeat. Unit: second | Integer32r/w Constraints: range: 1-655 | .1.3.6.1.4.1.2011.6.36.1.1.1.28 | ||||||||||||||||
| hwH248MedGwyCurHeartBeatTimerIndicates the current timer of the initial heartbeat. The valid value range is 1..655, if the value is 0, the heartbeat is not started. Unit: second | Integer32 Constraints: range: 0-655 | .1.3.6.1.4.1.2011.6.36.1.1.1.29 | ||||||||||||||||
| hwH248MedGwyCallHoldTimerIndicates the timer of holding the call after the MG interface is interrupted. Unit: second | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.2011.6.36.1.1.1.30 | ||||||||||||||||
| hwH248MedGwyMediaIPAddress1Indicates the first media IP address of the MG. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.2011.6.36.1.1.1.31 | ||||||||||||||||
| hwH248MedGwyMIDTypeIndicates the MID type of the MG message. Options: 1. ip4Address(1) -IP address 2. domainName(2) -domain name 3. deviceName(3) -device name | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.1.1.32 | ||||||||||||||||
| hwH248MedGwyDeviceNameIndicates the name of the MG device. | OctetStringr/w Constraints: range: 0-64 | .1.3.6.1.4.1.2011.6.36.1.1.1.33 | ||||||||||||||||
| hwH248MedGwyheartbeattimesIndicates the count of heartbeat re-transmission. | Integer32r/w Constraints: range: 0-20 | .1.3.6.1.4.1.2011.6.36.1.1.1.34 | ||||||||||||||||
| hwH248MedGwyheartbeatretranstimerIndicates the interval of heartbeat re-transmission. | Integer32r/w Constraints: range: 0-655 | .1.3.6.1.4.1.2011.6.36.1.1.1.35 | ||||||||||||||||
| hwH248MedGwyCurMIDTypeIndicates the current MID type of the MG message. Options: 1. ip4Address(1) -IP address 2. domainName(2) -domain name 3. deviceName(3) -device name | Enumeration Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.1.1.36 | ||||||||||||||||
| hwH248MedGwyCurDeviceNameIndicates the current name of the MG device. | OctetString Constraints: range: 0-64 | .1.3.6.1.4.1.2011.6.36.1.1.1.37 | ||||||||||||||||
| hwH248MedGwyGracefulTimerIndicates the graceful timer of the MG interface. This parameter is effective only when it is delivered with the shutdown graceful command. 0 means no time limit. Unit: second. | Integer32r/w Constraints: range: 0-86400 | .1.3.6.1.4.1.2011.6.36.1.1.1.38 | ||||||||||||||||
| hwH248MedGwyBeginNegotiationH248VersionIndicates the H.248 version at the beginning of the negotiation. 0:depend on profile 1:v1 2:v2 3:v3 | Integer32r/w Constraints: range: 0-3 | .1.3.6.1.4.1.2011.6.36.1.1.1.39 | ||||||||||||||||
| hwH248MedGwyProfileIndexIndicates the profile index configured for the MG. This parameter is effective only after the MG is reset. | Integer32r/w Constraints: range: 0-254 | .1.3.6.1.4.1.2011.6.36.1.1.1.40 | ||||||||||||||||
| hwH248MedGwyProfileIndexUsingIndicates the profile index that is currently used by the MG. | Integer32 Constraints: range: 0-254 | .1.3.6.1.4.1.2011.6.36.1.1.1.41 | ||||||||||||||||
| hwH248ProfileParaNegotiationSupportIndicates whether the MG supports the negotiated profile parameters. Options: 1. disable(1) -not support 2. enable(2) -support | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.1.1.42 | ||||||||||||||||
| hwH248MgProfileCfgNameIndicates the configured name of the H.248 profile of the MG. | OctetString Constraints: range: 1-67 | .1.3.6.1.4.1.2011.6.36.1.1.1.43 | ||||||||||||||||
| hwH248MgProfileNegoNameIndicates the negotiated name of the H.248 profile of the MG. | OctetString Constraints: range: 0-67 | .1.3.6.1.4.1.2011.6.36.1.1.1.44 | ||||||||||||||||
| hwH248MedGwyMediaIPAddress2Indicates the second media IP of MG. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.2011.6.36.1.1.1.45 | ||||||||||||||||
| hwH248MedGwyOperReasonCodeIndicates the reason code of reset or shutdown interface.It's valid when set hwH248MedGwyAdminStatus to 4,5 or 6 at the same time. The leaf is optional,if not set,use the default reason code relates to the status, and t… | Integer32r/w Constraints: range: -1--1range: 1-6 | .1.3.6.1.4.1.2011.6.36.1.1.1.46 | ||||||||||||||||
| hwH248MedGwySigIPAddrDhcpClientIndexDhcp Signal vlan id. The valid value range is 1..4093,if the value is -1, the static signal ip will be used. | Integer32r/w Constraints: range: -1--1range: 1-4093 | .1.3.6.1.4.1.2011.6.36.1.1.1.47 | ||||||||||||||||
| hwH248MedGwyMediaIPAddrDhcpClientIndexDhcp Media vlan id. The valid value range is 1..4093,if the value is -1, the static media ip will be used. | Integer32r/w Constraints: range: -1--1range: 1-4093 | .1.3.6.1.4.1.2011.6.36.1.1.1.48 | ||||||||||||||||
| hwH248MedGwyRestransIndicates whether the MG supports retrans. Options: 1. enable(1) -support 2. disable(2) -not support | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.1.1.49 | ||||||||||||||||
| hwH248MedGwySigIPAddrNameDynamic signal IP name. | OctetStringr/w Constraints: range: 0-64 | .1.3.6.1.4.1.2011.6.36.1.1.1.50 | ||||||||||||||||
| hwH248MedGwyMediaIPAddrNameDynamic media IP name. | OctetStringr/w Constraints: range: 0-64 | .1.3.6.1.4.1.2011.6.36.1.1.1.51 | ||||||||||||||||
| hwH248MedGwyKeepActiveFlagThe switch for transfer connect regular renovate. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2) | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.1.1.52 | ||||||||||||||||
| hwH248MedGwyKeepActivePeriodIndicates the configured period of transfer connect regular renovate. Unit: second Default:30 | Integer32r/w Constraints: range: 1-3600 | .1.3.6.1.4.1.2011.6.36.1.1.1.53 |
hwH248MedGwyCtrlTable
table.1.3.6.1.4.1.2011.6.36.1.2
·
1 row entry
·
11 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwH248MedGwyCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-H248-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-H248-MIB::hwH248MedGwyCtrlTable'
This table is used to config addresses of Media Gateway Controllers. The indexes of this table are hwH248MedGwyCtrlGatewayId, hwH248MedGwyCtrlIdx.
This table is used to config addresses of Media Gateway Controllers.
The indexes of this entry are hwH248MedGwyCtrlGatewayId, hwH248MedGwyCtrlIdx.
The indexes of this entry are hwH248MedGwyCtrlGatewayId, hwH248MedGwyCtrlIdx.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| hwH248MedGwyCtrlGatewayIdIndicates the MG ID. | Integer32 Constraints: range: 0-16777215 | .1.3.6.1.4.1.2011.6.36.1.2.1.1 | ||||||||||||
| hwH248MedGwyCtrlIdxIndicates the MGC index. | Integer32 Constraints: range: 0-2 | .1.3.6.1.4.1.2011.6.36.1.2.1.2 | ||||||||||||
| hwH248MedGwyCtrlIPAddressThe IP address of the Media Gateway Controller. The value 255.255.255.255 is returned if the entry is invalid. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.2011.6.36.1.2.1.3 | ||||||||||||
| hwH248MedGwyCtrlDnsNameIndicates the DNS name of the MGC. | OctetStringr/w Constraints: range: 0-64 | .1.3.6.1.4.1.2011.6.36.1.2.1.4 | ||||||||||||
| hwH248MedGwyCtrlDnsIpIndicates the IP address that is obtained through the MGC domain name. DEFVAL { false } | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.2011.6.36.1.2.1.5 | ||||||||||||
| hwH248MedGwyCtrlPortUDP port of the Media Gateway Controller. The value 65535 is returned if the entry is invalid. | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.2011.6.36.1.2.1.6 | ||||||||||||
| hwH248MedGwyCtrlAdminStatusIndicates to set the MGC as the active MGC. Options: 1. active(1) -active state | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.2.1.7 | ||||||||||||
| hwH248MedGwyCtrlOperStatusStatus of the Media Gateway Controller (and/or) its transportLink. Options: 1. up(1) -normal 2. down(2) -fault 3. standby(3) -standby | Enumeration Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.2.1.8 | ||||||||||||
| hwH248MedGwyCtrlRowStatusIndicates the row status. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.2011.6.36.1.2.1.9 | ||||||||||||
| hwH248MedGwyCtrlLastChangeThe value of sysUpTime at the time the associated link entered its current operational status. If the current status was entered prior to the last re-initialization of the local network management subsystem, then this o… | SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.2011.6.36.1.2.1.10 | ||||||||||||
| hwH248MedGwyCtrlIPAddress2The IP address of the Media Gateway Controller for SCTP dual homing. The value 255.255.255.255 is returned if the entry is invalid. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.2011.6.36.1.2.1.11 |
.1.3.6.1.4.1.2011.6.36.1.3
·
1 row entry
·
13 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwMgPhyTerminationCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-H248-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-H248-MIB::hwMgPhyTerminationCfgTable'
This table is used to config the physical termination of the MG. The index of this table is hwMgPhyTerminationIndex.
This table is used to config the physical termination of the MG.
The index of this entry is hwMgPhyTerminationIndex.
The index of this entry is hwMgPhyTerminationIndex.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| hwMgPhyTerminationIndexIndicates the shelf/slot/port. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.2011.6.36.1.3.1.1 | ||||||||||||
| hwMgPhyTerminationMgIdIndicates the MG ID. | Integer32r/w Constraints: range: 0-16777215 | .1.3.6.1.4.1.2011.6.36.1.3.1.2 | ||||||||||||
| hwMgPhyTerminationIDIndicates the termination ID. | OctetStringr/w Constraints: range: 0-64 | .1.3.6.1.4.1.2011.6.36.1.3.1.3 | ||||||||||||
| hwMgPhyTerminationTelNoIndicates the telephone number. | OctetStringr/w Constraints: range: 0-16 | .1.3.6.1.4.1.2011.6.36.1.3.1.4 | ||||||||||||
| hwMgPhyTerminationSrvStateIndicates the service status. Options: 1. serviceStopLocal(1) -stop local service 2. serviceStopRemote(2) -stop remote service 3. serviceStopAuto(3) -stop service automatically 4. serviceStart(4) -start service 5. ser… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.3.1.5 | ||||||||||||
| hwMgPhyTerminationOperateIndicates the service operation. Options: 1. stop(1) -stop service 2. start(2) -start service | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.3.1.6 | ||||||||||||
| hwMgPhyTerminationRowStatusIndicates the row status. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.2011.6.36.1.3.1.7 | ||||||||||||
| hwMgPhyTerminationContexIDIndicates the context ID of the termination. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.2011.6.36.1.3.1.8 | ||||||||||||
| hwMgPhyTerminationLayerFlagIndicates the layering flag. Currently, only the value nolayer(1) is supported. Options: 1. nolayer(1) -not to layer 2. layer(2) -to layer | Enumeration Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.3.1.9 | ||||||||||||
| hwMgPhyTerminationLastChangeIndicates the service status changing time. | SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.2011.6.36.1.3.1.10 | ||||||||||||
| hwMgPhyTerminationPriorityFlagIndicates the priority of the termination. Options: 1. cat1(1) -cat1 2. cat2(2) -cat2 3. cat3(3) -cat3 | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.3.1.11 | ||||||||||||
| hwMgPhyTerminationSrvAlarmStateIndicates the alarm state of service port. Options: 1. no(1) -has no alarm 2. yes(2) -has alarm | Enumeration Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.3.1.12 | ||||||||||||
| hwMgPhyTerminationSrvAlarmTypeIndicates the alarm type of service port. Options: 1. portFailure(1) -port failure 2. vagInterfaceInterrupt(2) -VAG Interrupt 3. noDsp(3) -no DSP resource alarm 4. portBlock(4) -port block 5. portLocked(5) -port locked … | Enumeration Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.3.1.13 |
.1.3.6.1.4.1.2011.6.36.1.4
·
1 row entry
·
12 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwMgPhyTerminationOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-H248-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-H248-MIB::hwMgPhyTerminationOperTable'
This table is used to query the port status of the physical termination of the MG. The index of this table is hwMgPhyTermIndex.
This table is used to query the port status of the physical termination of the MG.
The index of this entry is hwMgPhyTermIndex.
The index of this entry is hwMgPhyTermIndex.
Indexes
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| hwMgPhyTermIndexIndicates the shelf/slot/port. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.2011.6.36.1.4.1.1 | ||||||||||||||||||
| hwMgPhyTerminationPortStateIndicates the physical status of the port. Options: 1. idle(1) -idle 2. fault(2) -faulty 3. test(3) -test 4. lock(4) -locked 5. busy(5) -busy 6. localLoop(6) -local loopback 7. remoteLoop(7) -remote loopback 8. powerde… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.4.1.2 | ||||||||||||||||||
| hwMgPhyTerminationSrvTypeIndicates the service type of the port. Options: 1. normal(1)-instant service 2. innerSpc(2) -inner SPC 3. v5spc(3) -V5 SPC 4. v5pre(4) -V5 pre-connection 5. privateSpc(5) -private line service 6. ipSpc(6) -IP SPC | Enumeration Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.4.1.3 | ||||||||||||||||||
| hwMgPhyTerminationAdminStatusIndicates the maintenance operation of the port. Options: 1. reset(1) -reset 2. localloop(2) -local loopback 3. remoteloop(3) -remote loopback 4. cancelloop(4) -cancel loopback 5. startagc(5) -start automatic gain cont… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.4.1.4 | ||||||||||||||||||
| hwMgPhyTerminationStateChangeIndicates the physical status changing time of the port. | SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.2011.6.36.1.4.1.5 | ||||||||||||||||||
| hwMgPhyTerminationConfigStateIndicates the configured subscriber type. Options: 1. configedMgUser(1) -configured MG subscriber 2. configedV5User(2) -configured V5 subscriber 3. notConfiged(3) -not configured 4. spcmcfged(4) -configured SPCM subscr… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.4.1.6 | ||||||||||||||||||
| hwMgPhyTerminationOperOperateIndicates the service operation. Options: 1. stop(1) -stop service 2. start(2) -start service | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.4.1.7 | ||||||||||||||||||
| hwMgPhyTerminationMaxCOBTimeThe longest time of out of service gracefully. Unit:minute | Integer32r/w Constraints: range: 1-1440 | .1.3.6.1.4.1.2011.6.36.1.4.1.8 | ||||||||||||||||||
| hwMgPhyTerminationOnExpireThe disposal method when the port get out of service gracefully. Options: 1. forced(1) -force to stop service 2. cancel(2) -cancel operation | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.4.1.9 | ||||||||||||||||||
| hwMgPhyTerminationUpTimeSinceLastRTSThe time since PSTN port get in service latest | SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.2011.6.36.1.4.1.10 | ||||||||||||||||||
| hwMgPhyTerminationEndServiceLastTimeRemanent time before the timer overtime | SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.2011.6.36.1.4.1.11 | ||||||||||||||||||
| hwMgPhyTerminationEndServiceModeEndservice mode. 1-Immediate, 2-Graceful. | Integer32r/w Constraints: range: 1-2 | .1.3.6.1.4.1.2011.6.36.1.4.1.12 |
.1.3.6.1.4.1.2011.6.36.1.5
·
1 row entry
·
15 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwMgEphemeralTerminationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-H248-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-H248-MIB::hwMgEphemeralTerminationTable'
This table is used to config the virtual termination configuration of the MG. The indexes of this table are hwMgEphemeralTerminationMgId, hwMgEphemeralTerminationID.
This table is used to config the virtual termination configuration of the MG.
The indexes of this entry are hwMgEphemeralTerminationMgId, hwMgEphemeralTerminationID.
The indexes of this entry are hwMgEphemeralTerminationMgId, hwMgEphemeralTerminationID.
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| hwMgEphemeralTerminationMgIdIndicates the MG ID. | Integer32 Constraints: range: 0-16777215 | .1.3.6.1.4.1.2011.6.36.1.5.1.1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| hwMgEphemeralTerminationIDIndicates the virtual termination ID. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.2011.6.36.1.5.1.2 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| hwMgEphemeralTerminationPacketTimeIndicates the packetizing time. Unit: millisecond. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.2011.6.36.1.5.1.3 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| hwMgEphemeralTerminationVADIndicates voice activity detection. Options: 1. true(1) -enable VAD 2. false(2) -disable VAD | Enumeration Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.5.1.4 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| hwMgEphemeralTerminationECIndicates echo cancel. Options: 1. true(1) -enable EC 2. false(2) -disable EC | Enumeration Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.5.1.5 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| hwMgEphemeralTerminationJitBufferIndicates the value of JitBuffer. Unit: second. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.2011.6.36.1.5.1.6 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| hwMgEphemeralTerminationTransGainIndicates the transmit gain. Unit: dB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.2011.6.36.1.5.1.7 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| hwMgEphemeralTerminationRecvGainIndicates the receive gain. Unit: dB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.2011.6.36.1.5.1.8 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| hwMgEphemeralTerminationCodeCIndicates the enumerated definition of the VoiceCode. Note that several items in the enumerated definition are not consecutive. In the definition above, acG723Low(16) and acG723High(17) need not be distinguished and can… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.5.1.9 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| hwMgEphemeralTerminationLocalIPAddrIndicates the local IP address. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.2011.6.36.1.5.1.10 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| hwMgEphemeralTerminationLocalPortIndicates the local RTP port. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.2011.6.36.1.5.1.11 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| hwMgEphemeralTerminationPeerIPAddrIndicates the peer IP address. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.2011.6.36.1.5.1.12 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| hwMgEphemeralTerminationPeerPortIndicates the peer RTP port. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.2011.6.36.1.5.1.13 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| hwMgEphemeralTerminationPlaceIndicates the DSP channel (shelf/slot/subboard/channel index) of the virtual terminal of the MG. Bits 31-26 (six bits): shelf index Bits 25-20 (six bits): slot index Bits 19-16 (four bits): subboard index Bits 15-0 (16 … | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.2011.6.36.1.5.1.14 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| hwMgEphemeralTerminationContexIDIndicates the context ID. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.2011.6.36.1.5.1.15 |
hwMgContexTable
table.1.3.6.1.4.1.2011.6.36.1.6
·
1 row entry
·
4 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwMgContexTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-H248-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-H248-MIB::hwMgContexTable'
This table is used to config the context of the MG. The indexes of this table are hwMgContexMgId, hwMgContexlID.
This table is used to config the context of the MG.
The indexes of this entry are hwMgContexMgId, hwMgContexlID.
The indexes of this entry are hwMgContexMgId, hwMgContexlID.
Indexes
| Column | Syntax | OID |
|---|---|---|
| hwMgContexMgIdIndicates the MG ID. | Integer32 Constraints: range: 0-16777215 | .1.3.6.1.4.1.2011.6.36.1.6.1.1 |
| hwMgContexlIDIndicates the context ID. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.2011.6.36.1.6.1.2 |
| hwMgTerminationID1Indicates the physical termination ID. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.2011.6.36.1.6.1.3 |
| hwMgTerminationID2Indicates the virtual termination ID. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.2011.6.36.1.6.1.4 |
hwH248ParaTable
table.1.3.6.1.4.1.2011.6.36.1.17
·
1 row entry
·
20 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwH248ParaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-H248-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-H248-MIB::hwH248ParaTable'
This table is used to config the H.248 parameter. The index of this table is hwH248ParaMgId.
This table is used to config the H.248 parameter.
The index of this entry is hwH248ParaMgId.
The index of this entry is hwH248ParaMgId.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| hwH248ParaMgIdIndicates the MG ID. | Integer32 Constraints: range: 0-16777215 | .1.3.6.1.4.1.2011.6.36.1.17.1.1 | ||||||
| hwH248ParaTransReliableIndicates the transaction reliability. The transaction reliability queue and the re-transmission timer are initialized when the protocol is initialized. Therefore, the transaction reliability can be set dynamically base… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.17.1.2 | ||||||
| hwH248ParaLongTimerIndicates the length of the long timer. This parameter is a concept in the transaction reliability of the H.248 protocol stack. The protocol recommends a value of 30000 ms. The value can be set dynamically according to … | Integer32r/w Constraints: range: 10000-40000 | .1.3.6.1.4.1.2011.6.36.1.17.1.3 | ||||||
| hwH248ParaMaxRetransTimerIndicates the maximum length of the re-transmission timer. This parameter is a concept in the transaction reliability of the H.248 protocol stack. The protocol recommends a value of 4000 ms. When the H.248 protocol stac… | Integer32r/w Constraints: range: 500-16000 | .1.3.6.1.4.1.2011.6.36.1.17.1.4 | ||||||
| hwH248ParaMinRetransTimerIndicates the minimum length of the re-transmission timer. This parameter is a concept in the transaction reliability of the H.248 protocol stack. The protocol recommends a value of 1000 ms. When the H.248 protocol stac… | Integer32r/w Constraints: range: 100-4000 | .1.3.6.1.4.1.2011.6.36.1.17.1.5 | ||||||
| hwH248ParaMgProvRespTimerIndicates the length of the timer for provisional responses. By default, it is 8000 ms. Unit: millisecond. | Integer32r/w Constraints: range: 6000-10000 | .1.3.6.1.4.1.2011.6.36.1.17.1.6 | ||||||
| hwH248ParaMaxRetransIndicates the maximum count of re-transmission. This parameter is a concept in the transaction reliability of the H.248 protocol stack. The value can be set dynamically based on different network conditions. By default,… | Integer32r/w Constraints: range: 1-9 | .1.3.6.1.4.1.2011.6.36.1.17.1.7 | ||||||
| hwH248ParaSecurityIndicates the authorization type. Options: 1. noah(1) -no authorization 2. md5(2) -MD5 3. sha1(3) -SHA1 | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.17.1.8 | ||||||
| hwH248ParaSdpEncodeTypeIndicates the SDP encapsulation type. Options: 1. text(1) -text 2. hex(2) -hex | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.17.1.9 | ||||||
| hwH248ParaResponseAckCtrlIndicates the switch of the three-way handshake signal. Options: 1. false(1) -disable three-way handshake 2. true(2) -enable three-way handshake | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.17.1.10 | ||||||
| hwH248ParaRetransModeIndicates the retransmission mode. Options: 1. auto(1) -auto 2. fixed(2) -fixed | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.17.1.11 | ||||||
| hwH248ParaRetransTimerIndicates the fixed re-transmission interval (this parameter is effective when the re-transmission mode is the fixed mode; by default, it is 2000). | Integer32r/w Constraints: range: 100-4000 | .1.3.6.1.4.1.2011.6.36.1.17.1.12 | ||||||
| hwH248ParaTMaxIndicates the re-transmission length of the H.248 protocol stack (by default, it is 25000). | Integer32r/w Constraints: range: 10000-30000 | .1.3.6.1.4.1.2011.6.36.1.17.1.13 | ||||||
| hwH248ParaRetransfailoptionIndicates the retransmission failure option of the H.248 protocol stack. Options: 1. times(1) -times 2. t-max(2) -max time | Enumeration Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.17.1.14 | ||||||
| hwH248ParaFormatoptionIndicates the message format of the H.248 protocol stack. Options: 1. short(1) -short format 2. long(2) -long format Default: short(1) | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.17.1.15 | ||||||
| hwH248ParaMTUIndicates the value of the maximum transmission unit of the H.248 protocol stack. Default: 1500 | Integer32r/w Constraints: range: 1-10000 | .1.3.6.1.4.1.2011.6.36.1.17.1.16 | ||||||
| hwH248ParaMessagesegmentationIndicates the message format of the H.248 protocol stack. Options: 1. support(1) -support format message 2. notsupport(2) -not support format message Default: support(1) | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.17.1.17 | ||||||
| hwH248ParaMgcProvRespTimerIndicates the length of MGC provisional response timer. Unit: millisecond | Integer32r/w Constraints: range: 6000-10000 | .1.3.6.1.4.1.2011.6.36.1.17.1.18 | ||||||
| hwH248ParaMgOriginatedPendingLimitIndicates the max times of MG sends provisional response. | Integer32r/w Constraints: range: 1-10 | .1.3.6.1.4.1.2011.6.36.1.17.1.19 | ||||||
| hwH248ParaMgcOriginatedPendingLimitIndicates the max times of MGC sends provisional response. | Integer32r/w Constraints: range: 1-10 | .1.3.6.1.4.1.2011.6.36.1.17.1.20 |
hwH248DigitmapTable
table.1.3.6.1.4.1.2011.6.36.1.23
·
1 row entry
·
5 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwH248DigitmapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-H248-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-H248-MIB::hwH248DigitmapTable'
This table is used to config the inner digitmap configuration. The index of this table is hwH248DigitmapMgId.
This table is used to config the inner digitmap configuration.
The index of this entry is hwH248DigitmapMgId.
The index of this entry is hwH248DigitmapMgId.
Indexes
| Column | Syntax | OID |
|---|---|---|
| hwH248DigitmapMgIdIndicates the MG interface ID. | Integer32 Constraints: range: 0-16777215 | .1.3.6.1.4.1.2011.6.36.1.23.1.1 |
| hwH248DigitmapInnerIndicates the inner call digitmap. | OctetStringr/w Constraints: range: 0-127 | .1.3.6.1.4.1.2011.6.36.1.23.1.2 |
| hwH248DigitmapEmergencyIndicates the emergency channel digitmap. | OctetStringr/w Constraints: range: 0-127 | .1.3.6.1.4.1.2011.6.36.1.23.1.3 |
| hwH248DigitmapDualdialIndicates the automatic re-dial digitmap. | OctetStringr/w Constraints: range: 0-14 | .1.3.6.1.4.1.2011.6.36.1.23.1.4 |
| hwH248DigitmapOverLoadUrgentIndicates the emergency call digitmap in case of overload or insufficient bandwidth. | OctetStringr/w Constraints: range: 0-127 | .1.3.6.1.4.1.2011.6.36.1.23.1.5 |
hwStandaloneParaTable
table.1.3.6.1.4.1.2011.6.36.1.24
·
1 row entry
·
4 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwStandaloneParaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-H248-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-H248-MIB::hwStandaloneParaTable'
This table is used to config the stand-alone parameter. The index of this table is hwStandaloneParaMgId.
This table is used to config the stand-alone parameter.
The index of this entry is hwStandaloneParaMgId.
The index of this entry is hwStandaloneParaMgId.
Indexes
| Column | Syntax | OID |
|---|---|---|
| hwStandaloneParaMgIdIndicates the MG interface ID. | Integer32 Constraints: range: 0-16777215 | .1.3.6.1.4.1.2011.6.36.1.24.1.1 |
| hwStandAloneDialToneIndicates the duration of the dial tone. Unit: second | Integer32r/w Constraints: range: 1-120 | .1.3.6.1.4.1.2011.6.36.1.24.1.2 |
| hwStandAloneRingIndicates the duration of the ring. Unit: second | Integer32r/w Constraints: range: 1-120 | .1.3.6.1.4.1.2011.6.36.1.24.1.3 |
| hwStandAloneBusyToneIndicates the duration of the busy tone. Unit: second | Integer32r/w Constraints: range: 1-120 | .1.3.6.1.4.1.2011.6.36.1.24.1.4 |
.1.3.6.1.4.1.2011.6.36.1.28
·
1 row entry
·
39 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwH248MgSoftParameterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-H248-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-H248-MIB::hwH248MgSoftParameterTable'
This table is to indicates the MG software parameter. The index of this table is hwH248MgInterfaceIndex.
This table is to indicates the MG software parameter.
The index of this entry is hwH248MgInterfaceIndex.
The index of this entry is hwH248MgInterfaceIndex.
Indexes
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| hwH248MgInterfaceIndexIndicates the MG interface index. | Integer32 Constraints: range: 0-16777215 | .1.3.6.1.4.1.2011.6.36.1.28.1.1 | ||||||||||
hwH248MgSoftParameter0deprecated Parameter name index 0. It indicates whether the terminal ID of the MG interface is layered. In the P300, the values of 1 and 2 are unavailable. Options: 1. yes(1) -layered 2. no(2) -not layered 3. nolayer(3) -not laye… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.28.1.2 | ||||||||||
hwH248MgSoftParameter1deprecated Parameter name index 1. It indicates whether the ongoing calls are maintained after MG is disconnected from MGC. (It is unavailable in the VSPV1R2.)Options: 1. holding-to-resume(1) -hold to resume 2. no(2) -not maintai… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.28.1.3 | ||||||||||
| hwH248MgSoftParameter2Parameter name index 2. It indicates whether the MG interface supports multiple homing. It is unavailable in the VSPV1R2. Options: 1. no(1) -not support multiple homing 2. multiHome(2) -support multipl… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.28.1.4 | ||||||||||
hwH248MgSoftParameter3deprecated Parameter name index 3. It indicates the MG interface interruption detecting mode. It is unavailable in the P300.Options: 1. heartbeat(1) -heartbeat 2. messageRetransmission(2) -retransmission | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.28.1.5 | ||||||||||
| hwH248MgSoftParameter4Parameter name index 4. It indicates whether the wildcard is used in registration. Options: 1. yes(1) -use wildcard in registration 2. no(2) -do not use wildcard in registration Default: yes(1) | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.28.1.6 | ||||||||||
hwH248MgSoftParameter5deprecated Parameter name index 5. It indicates whether the port fault and auto-block is reported to the MGC.Options: 1. yes(1) -the port fault and auto-block is reported to the MGC 2. no(2) -the port fault and auto-block is not… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.28.1.7 | ||||||||||
| hwH248MgSoftParameter6Parameter name index 6. It indicates whether authentication is supported. Options: 1. yes(1) -support authentication 2. no(2) -not support authentication Default: no(2) | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.28.1.8 | ||||||||||
| hwH248MgSoftParameter7Parameter name index 7. It indicates whether the security header is supported. Options: 1. yes(1) -support the security header 2. no(2) -not support the security header Default: no(2) | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.28.1.9 | ||||||||||
hwH248MgSoftParameter8deprecated Parameter name index 8. It indicates the maximum count of DSPs supported by the VAG. It is unavailable in the P300. | Integer32r/w Constraints: range: 0-1000 | .1.3.6.1.4.1.2011.6.36.1.28.1.10 | ||||||||||
hwH248MgSoftParameter9deprecated Parameter name index 9. It indicates whether overload control is supported. It is unavailable in the P300.Options: 1. yes(1) -support overload control 2. no(2) -not support overload control | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.28.1.11 | ||||||||||
hwH248MgSoftParameter10deprecated Parameter name index 10. It indicates whether the SDP contains the o=,s=,t= row. It is unavailable in the VSPV1R2.Options: 1. yes(1) -SDP contain the o=,s=,t= row 2. no(2) -SDP not contain the o=,s=,t= row | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.28.1.12 | ||||||||||
| hwH248MgSoftParameter11Parameter name index 11. It indicates the stand-alone flag. Options: 1. none(1) -not support stand alone 2. inner(2) -support inner call 3. emergency(3) -support emergence call 4. both(4) -support inner ca… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.28.1.13 | ||||||||||
hwH248MgSoftParameter12deprecated Parameter name index 12. It indicates the stand-alone interruption flag. It is unavailable in the VSPV1R2.Options: 1. no(1) -no 2. yes(2) -yes | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.28.1.14 | ||||||||||
| hwH248MgSoftParameter13Parameter name index 13. It indicates the DMM match mode. Options: 1. min(1) -shortest 2. max(2) -longest 3. auto(3) -protocol define 4. autoadapt(4) -auto adapter Default: min(1) | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.28.1.15 | ||||||||||
hwH248MgSoftParameter14deprecated Parameter name index 14. It indicates the value of the maximum transmission unit.Options: 1. min(1) -min 2. max(5000) -max | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.28.1.16 | ||||||||||
| hwH248MgSoftParameter15Parameter name index 15. It indicates the RTP source port filtering switch. Options: 1. no(1) -not filter without remote media. 2. yes(2) -filter without remote media. 3. always-no(3) -always not filter. Default: n… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.28.1.17 | ||||||||||
| hwH248MgSoftParameter16Parameter name index 16. It indicates the length of the RTP source port filtering timer. This parameter is valid only when the RTP filtering is enabled. Range: 1-400(VSP is 1-30S) Default: 5 Unit: second | Integer32r/w Constraints: range: 1-400 | .1.3.6.1.4.1.2011.6.36.1.28.1.18 | ||||||||||
hwH248MgSoftParameter17deprecated Parameter name index 17. It indicates the context protection switch. It is unavailable in the VSPV1R2.Options: 1. yes(1) -the system releases the resource automatically 2. no(2) -the system does not release the resour… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.28.1.19 | ||||||||||
hwH248MgSoftParameter18deprecated Parameter name index 18. It indicates the point-to-point fault report flag. Options: 1. yes(1) -report 2. no(2) -not report | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.28.1.20 | ||||||||||
hwH248MgSoftParameter19deprecated Parameter name index 19. It indicates the point-to-multipoint fault report flag. Options: 1. yes(1) -report 2. no(2) -not report | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.28.1.21 | ||||||||||
hwH248MgSoftParameter20deprecated Parameter name index 20. It indicates the protocol version negotiation strategy. It is unavailable in the VSPV1R2.Options: 1. highest(1) -negotiate from the latest version 2. lowest(2) -negotiate from the earliest ver… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.28.1.22 | ||||||||||
hwH248MgSoftParameter21deprecated Parameter name index 21. It is reserved in the system.Options: 1. yes(1) -yes 2. no(2) -no | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.28.1.23 | ||||||||||
| hwH248MgSoftParameter22Parameter name index 22. It indicates the type of the prompt tone that is played after MG is disconnected from MGC. Options: 1. bT(1) -busy tone 2. eET(2) -equipment engaged tone 3. announcement(3) -announcement Defaul… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.28.1.24 | ||||||||||
| hwH248MgSoftParameter23Parameter name index 23.It indicates the length of synchronize-delay timer of port config state. Default: 35 Unit: second | Integer32r/w Constraints: range: 0-120 | .1.3.6.1.4.1.2011.6.36.1.28.1.25 | ||||||||||
| hwH248MgSoftParameter24Parameter name index 24. It indicates the number of rtp terminal. The maximum value is limited by product specification. | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.2011.6.36.1.28.1.26 | ||||||||||
| hwH248MgSoftParameter25Parameter name index 25. It indicates max random value of the avalanche prevention system of the interface. Default: 60000 Unit: millisecond | Integer32r/w Constraints: range: 30000-300000 | .1.3.6.1.4.1.2011.6.36.1.28.1.27 | ||||||||||
| hwH248MgSoftParameter26Parameter name index 26. It indicates the local block tone type. Options: 1. busyTone(1) -busy tone 2. congestionTone(2) -congestion tone 3. muteTone(3) -mute tone 4. userDefineTone1(4) -user defined t… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.28.1.28 | ||||||||||
| hwH248MgSoftParameter27Parameter name index 27. It indicates the remote block tone type. Options: 1. busyTone(1) -busy tone 2. congestionTone(2) -congestion tone 3. muteTone(3) -mute tone 4. userDefineTone1(4) -user defined … | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.28.1.29 | ||||||||||
| hwH248MgSoftParameter28Parameter name index 28. It indicates the length of howler tone. Default: 60 Unit: second | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.2011.6.36.1.28.1.30 | ||||||||||
| hwH248MgSoftParameter29Parameter name index 29. It indicates the length of message waiting tone. Default: 3 Unit: second | Integer32r/w Constraints: range: 1-60000 | .1.3.6.1.4.1.2011.6.36.1.28.1.31 | ||||||||||
| hwH248MgSoftParameter30Parameter name index 30. It indicates the length of long connect alarm. Default: 60 Unit: minute | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.2011.6.36.1.28.1.32 | ||||||||||
| hwH248MgSoftParameter31Parameter name index 31. It indicates whether MG send long connect alarm. Options: 1. enable(1) -enable send long connect alarm 2. disable(2) -disable send long connect alarm Default: disable(2) | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.28.1.33 | ||||||||||
| hwH248MgSoftParameter32Parameter name index 32. The minimal length of port auto register timer. Default: 1800 Unit: second | Integer32r/w Constraints: range: 0-60000 | .1.3.6.1.4.1.2011.6.36.1.28.1.34 | ||||||||||
| hwH248MgSoftParameter33Parameter name index 33. It indicates whether MG shutdown heartbeat. Options: 1. shutdown(1) -shutdown heartbeat 2. enable(2) -enable heartbeat Default: enable(2) | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.28.1.35 | ||||||||||
| hwH248MgSoftParameter34Parameter name index 34. It indicates whether the gateway actively sets up or cancels the link for the BRA user when the softswitch issues the in-service or out-of-service message. Options: 1. yes(1) -yes 2. no(2) -… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.28.1.36 | ||||||||||
| hwH248MgSoftParameter35Parameter name index 35. It indicates the mode for ISDN port is in service and out service. Options: 1. both(1) -supports in-service and out-of-service in single channel mode and wildcard mode 2. singlechannel(… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.28.1.37 | ||||||||||
| hwH248MgSoftParameter36Parameter name index 36. Indicates the baseline interval of sending the registration message during the switchover between multi-homing MGCs. Default: 40 Unit: second | Integer32r/w Constraints: range: 1-1800 | .1.3.6.1.4.1.2011.6.36.1.28.1.38 | ||||||||||
| hwH248MgSoftParameter37Parameter name index 37. The switch for the pulse signal switch to the DTMF signal. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2) | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.28.1.39 |
hwH248DmmParaTable
table.1.3.6.1.4.1.2011.6.36.1.29
·
1 row entry
·
5 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwH248DmmParaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-H248-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-H248-MIB::hwH248DmmParaTable'
This table is used to config the digitmap. The index of this table is hwH248DmmParaMgId.
This table is used to config the digitmap.
The index of this entry is hwH248DmmParaMgId.
The index of this entry is hwH248DmmParaMgId.
Indexes
| Column | Syntax | OID |
|---|---|---|
| hwH248DmmParaMgIdIndicates the MG ID. | Integer32 Constraints: range: 0-16777215 | .1.3.6.1.4.1.2011.6.36.1.29.1.1 |
| hwH248DmmParaStartTimerIndicates the length of the DMM start timer. Unit: second | Integer32r/w Constraints: range: 0-99 | .1.3.6.1.4.1.2011.6.36.1.29.1.2 |
| hwH248DmmParaShortTimerIndicates the length of the DMM short timer. Unit: second | Integer32r/w Constraints: range: 1-99 | .1.3.6.1.4.1.2011.6.36.1.29.1.3 |
| hwH248DmmParaLongTimerIndicates the length of the DMM long timer Unit: second | Integer32r/w Constraints: range: 1-99 | .1.3.6.1.4.1.2011.6.36.1.29.1.4 |
| hwH248DmmParaDurationTimerIndicates the length of the DMM duration timer. Unit: millisecond | Integer32r/w Constraints: range: 100-9900 | .1.3.6.1.4.1.2011.6.36.1.29.1.6 |
hwOverloadReservalTable
table.1.3.6.1.4.1.2011.6.36.1.31
·
1 row entry
·
12 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwOverloadReservalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-H248-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-H248-MIB::hwOverloadReservalTable'
This table is used to config the DSP reserved parameter. The index of this table is hwDspOverloadReservalMgId.
This table is used to config the DSP reserved parameter.
The index of this entry is hwDspOverloadReservalMgId.
The index of this entry is hwDspOverloadReservalMgId.
Indexes
| Column | Syntax | OID |
|---|---|---|
| hwDspOverloadReservalMgIdIndicates the MG ID to be configured. | Integer32 Constraints: range: 0-16777215 | .1.3.6.1.4.1.2011.6.36.1.31.1.1 |
| hwTotalDspNumIndicates the total count of DSPs. | Integer32r/w Constraints: range: 0-3072 | .1.3.6.1.4.1.2011.6.36.1.31.1.2 |
| hwTotalDspUseNumIndicates the total count of occupied DSPs. Default: 0 | Integer32 Constraints: range: 0-3072 | .1.3.6.1.4.1.2011.6.36.1.31.1.3 |
| hwReservalCat1DspNumIndicates the count of the DSPs of category 1. | Integer32r/w Constraints: range: 0-3072 | .1.3.6.1.4.1.2011.6.36.1.31.1.4 |
| hwActualCat1DspUseNumIndicates the count of the occupied DSPs of category 1. Default: 0 | Integer32 Constraints: range: 0-3072 | .1.3.6.1.4.1.2011.6.36.1.31.1.5 |
| hwActualCat1CallUseDspNumIndicates the count of the DSPs of category 1 occupied by calls. Default: 0 | Integer32 Constraints: range: 0-3072 | .1.3.6.1.4.1.2011.6.36.1.31.1.6 |
| hwReservalCat2DspNumIndicates the count of the DSPs of category 2. | Integer32r/w Constraints: range: 0-3072 | .1.3.6.1.4.1.2011.6.36.1.31.1.7 |
| hwActualCat2DspUseNumIndicates the count of the occupied DSPs of category 2. Default: 0 | Integer32 Constraints: range: 0-3072 | .1.3.6.1.4.1.2011.6.36.1.31.1.8 |
| hwActualCat2CallUseDspNumIndicates the count of the DSPs of category 2 occupied by calls. Default: 0 | Integer32 Constraints: range: 0-3072 | .1.3.6.1.4.1.2011.6.36.1.31.1.9 |
| hwDspReservalCommonNumIndicates the count of common DSPs reserved for configuration. | Integer32 Constraints: range: 0-3072 | .1.3.6.1.4.1.2011.6.36.1.31.1.10 |
| hwActualCommonDspUseNumIndicates the count of occupied common DSPs. Default: 0 | Integer32 Constraints: range: 0-3072 | .1.3.6.1.4.1.2011.6.36.1.31.1.11 |
| hwActualCommonCallUseDspNumIndicates the count of the common DSPs occupied by calls. Default: 0 | Integer32 Constraints: range: 0-3072 | .1.3.6.1.4.1.2011.6.36.1.31.1.12 |
hwH248TIDConfigTable
table.1.3.6.1.4.1.2011.6.36.1.32
·
1 row entry
·
17 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwH248TIDConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-H248-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-H248-MIB::hwH248TIDConfigTable'
This table is used to config H248 terminal ID. The index of this table is hwVAGId.
This table is used to config H248 terminal ID.
The index of this entry is hwVAGId.
The index of this entry is hwVAGId.
Indexes
| Column | Syntax | OID |
|---|---|---|
| hwVAGIdMedia Gateway ID. | Integer32 Constraints: range: 0-16777215 | .1.3.6.1.4.1.2011.6.36.1.32.1.1 |
| hwH248BraPrefixIndicates the BRA terminal prefix. | OctetStringr/w Constraints: range: 1-64 | .1.3.6.1.4.1.2011.6.36.1.32.1.2 |
| hwH248PraPrefixIndicates the PRA terminal prefix. | OctetStringr/w Constraints: range: 1-64 | .1.3.6.1.4.1.2011.6.36.1.32.1.3 |
| hwH248PstnPrefixIndicates the PSTN terminal prefix. | OctetStringr/w Constraints: range: 1-64 | .1.3.6.1.4.1.2011.6.36.1.32.1.4 |
| hwH248RtpPrefixIndicates the RTP terminal prefix. | OctetStringr/w Constraints: range: 1-64 | .1.3.6.1.4.1.2011.6.36.1.32.1.5 |
| hwH248SeparatorIndicates the terminal separator. | OctetString Constraints: range: 0-7 | .1.3.6.1.4.1.2011.6.36.1.32.1.6 |
| hwH248R2PrefixIndicates the R2 terminal prefix. | OctetStringr/w Constraints: range: 1-64 | .1.3.6.1.4.1.2011.6.36.1.32.1.7 |
| hwH248DpnssPrefixIndicates the DPNSS terminal prefix. | OctetStringr/w Constraints: range: 1-64 | .1.3.6.1.4.1.2011.6.36.1.32.1.8 |
| hwH248Dass2PrefixIndicates the DASS2 terminal prefix. | OctetStringr/w Constraints: range: 1-64 | .1.3.6.1.4.1.2011.6.36.1.32.1.9 |
| hwH248BraTemplateIndexIndicates the index of the BRA TID profile. | Integer32r/w Constraints: range: 0-63 | .1.3.6.1.4.1.2011.6.36.1.32.1.10 |
| hwH248PraTemplateIndexIndicates the index of the PRA TID profile. | Integer32r/w Constraints: range: 0-63 | .1.3.6.1.4.1.2011.6.36.1.32.1.11 |
| hwH248PstnTemplateIndexIndicates the index of the PSTN TID profile. | Integer32r/w Constraints: range: 0-63 | .1.3.6.1.4.1.2011.6.36.1.32.1.12 |
| hwH248RtpTemplateIndexIndicates the index of the RTP TID profile. | Integer32r/w Constraints: range: 0-63 | .1.3.6.1.4.1.2011.6.36.1.32.1.13 |
| hwH248R2TemplateIndexIndicates the index of the R2 TID profile. | Integer32r/w Constraints: range: 0-63 | .1.3.6.1.4.1.2011.6.36.1.32.1.14 |
| hwH248DpnssTemplateIndexIndicates the index of the DPNSS TID profile. | Integer32r/w Constraints: range: 0-63 | .1.3.6.1.4.1.2011.6.36.1.32.1.15 |
| hwH248Dass2TemplateIndexIndicates the index of the DASS2 TID profile. | Integer32r/w Constraints: range: 0-63 | .1.3.6.1.4.1.2011.6.36.1.32.1.16 |
| hwH248IsNeedToConfigTIDIndicates whether the terminal ID needs to be configured for the subscriber. Bit0 (low) to bit31 (high) respectively represent PSTN, BRA, PRA, DPNSS, DASS2, and R2. The remaining bits are reserved. (It is unavailable in… | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.2011.6.36.1.32.1.17 |
.1.3.6.1.4.1.2011.6.36.1.67
·
1 row entry
·
3 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwH248ProfileSupportTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-H248-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-H248-MIB::hwH248ProfileSupportTable'
This table is used to set the H248 profile configuration. The index of this table is hwH248ProfileIndex.
This table is used to set the H248 profile configuration.
The index of this entry is hwH248ProfileIndex.
The index of this entry is hwH248ProfileIndex.
Indexes
| Column | Syntax | OID |
|---|---|---|
| hwH248ProfileIndexIndicates the profile index. | Integer32 Constraints: range: 0-254 | .1.3.6.1.4.1.2011.6.36.1.67.1.1 |
| hwH248ProfileCfgNameIndicates the configuration name of the profile. | OctetString | .1.3.6.1.4.1.2011.6.36.1.67.1.2 |
| hwH248ProfileRegNameIndicates the registration name (that is, the negotiation name) of the profile. | OctetString | .1.3.6.1.4.1.2011.6.36.1.67.1.3 |
.1.3.6.1.4.1.2011.6.36.1.68
·
1 row entry
·
13 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwH248MedGwyCurTableTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOIP-H248-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOIP-H248-MIB::hwH248MedGwyCurTableTable'
This table is used to query the current parameter configuration status of the MG interface. The index of this table is hwH248MgId.
This table is used to query the current parameter configuration status of the MG interface.
The index of this entry is hwH248MgId.
The index of this entry is hwH248MgId.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| hwH248MgIdIndicates the MG ID. | Integer32 Constraints: range: 0-16777215 | .1.3.6.1.4.1.2011.6.36.1.68.1.1 | ||||||
| hwH248MedGwyProfileIndexCurIndicates the profile index that is currently used by the MG. | Integer32 Constraints: range: 0-254 | .1.3.6.1.4.1.2011.6.36.1.68.1.2 | ||||||
| hwH248MedGwyH248VersionCurIndicates the current H.248 version of the MG. Options: 1. v1(1) -version 1 2. v2(2) -version 2 3. v3(3) -version 3 | Enumeration Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.68.1.3 | ||||||
| hwH248MedGwyHeartBeatTimerCurIndicates the current length of the initial heartbeat timer. The valid value range is 5..655, if the value is 0, the heartbeat is not started. Unit: second | Integer32 Constraints: range: 0-0range: 5-655 | .1.3.6.1.4.1.2011.6.36.1.68.1.4 | ||||||
| hwH248MedGwyMIDTypeCurIndicates the current message MID type of the MG. Options: 1. ip4Address(1) -IP address 2. domainName(2) -domain name 3. deviceName(3) -device name | Enumeration Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.68.1.5 | ||||||
| hwH248MedGwyDeviceNameCurIndicates the current device name of the MG. | OctetString Constraints: range: 0-64 | .1.3.6.1.4.1.2011.6.36.1.68.1.6 | ||||||
| hwH248ProfileNegoParaCurIndicates whether the profile currently used by the MG supports the profile parameter negotiation. Options: 1. disable(1) -disable 2. enable(2) -enable | Enumeration Enumerated Values:
| .1.3.6.1.4.1.2011.6.36.1.68.1.7 | ||||||
| hwH248ProfileCfgNameCurIndicates the configuration name of the H.248 profile currently used by the MG. | OctetString Constraints: range: 1-67 | .1.3.6.1.4.1.2011.6.36.1.68.1.8 | ||||||
| hwH248ProfileNegoNameCurIndicates the negotiation name of the H.248 profile currently used by the MG. | OctetString Constraints: range: 0-67 | .1.3.6.1.4.1.2011.6.36.1.68.1.9 | ||||||
| hwH248MedGwySigIPAddrNameCurIndicates the current working dynamic signal IP name. | OctetString Constraints: range: 0-64 | .1.3.6.1.4.1.2011.6.36.1.68.1.10 | ||||||
| hwH248MedGwyMediaIPAddrNameCurIndicates the current working dynamic media IP name. | OctetString Constraints: range: 0-64 | .1.3.6.1.4.1.2011.6.36.1.68.1.11 | ||||||
| hwH248MedGwySigIPAddress1CurIndicates the signaling IP address of currently used by the MG. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.2011.6.36.1.68.1.12 | ||||||
| hwH248MedGwyMediaIPAddress1CurIndicates the media IP address of currently used by the MG. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.2011.6.36.1.68.1.13 |