HUAWEI-VOIP-COMMON-MIB Table View

This table is used to config the operation of DSP channel.
The index of this table is hwMgDspOperIndex.

hwMgDspOperateEntry row .1.3.6.1.4.1.2011.6.36.1.8.1

This table is used to config the operation of DSP channel.
The index of this entry is hwMgDspOperIndex.

Indexes

hwMgDspOperIndex

Column	Syntax	OID
hwMgDspOperIndex Indicates the shelf/slot/subboard/channel index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.8.1.1
hwMgDspOperChannelState Indicates the channel status. Options: 1. idle(1) -idle 2. g711(2) -G.711 3. fault(3) -faulty 4. probit(4) -prohibited 5. pcmLoopback(5) -PCM loopback 6. ipLoopback(6) -IP loopback 7. all(7) -full rate 8. wastage(8) -w…	Enumeration Enumerated Values: 1 idle 2 g711 3 fault 4 probit 5 pcmLoopback 6 ipLoopback 7 all 8 wastage	.1.3.6.1.4.1.2011.6.36.1.8.1.2
hwMgDspOperChannelWorkMode Indicates the channel status. The parameter is effective only when the channel status is busy. Options: 1. all(1) -full rate 2. g711(2) -G.711 3. wastage(3) -wastage	Enumeration Enumerated Values: 1 all 2 g711 3 wastage	.1.3.6.1.4.1.2011.6.36.1.8.1.3
hwMgDspOperStateChange Indicates the channel status changing time.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.36.1.8.1.4
hwMgDspOperAdminStatus Indicates the operation type. Options: 1. prohibit(1) -prohibit 2. unprohibit(2) -unprohibit 3. pcmLoopback(3) -PCM loopback 4. ipLoopback(4) -IP loopback 5. noLoopback(5) -cancel loopback.	Enumerationr/w Enumerated Values: 1 prohibit 2 unprohibit 3 pcmLoopback 4 ipLoopback 5 noLoopback	.1.3.6.1.4.1.2011.6.36.1.8.1.5
hwMgDspJBInPerCent Indicates the current fill level of the jitterbuffer in percent.	Unsigned32 Constraints: range: 0-100	.1.3.6.1.4.1.2011.6.36.1.8.1.6

This table is used to query the DSP channel statistics.
The index of this table is hwMgDspStatisticsIndex.

hwMgDspStatisticsEntry row .1.3.6.1.4.1.2011.6.36.1.9.1

This table is used to query the DSP channel statistics.
The index of this entry is hwMgDspStatisticsIndex.

Indexes

hwMgDspStatisticsIndex

Column	Syntax	OID
hwMgDspStatisticsIndex Bits 31-26 (six bits): shelf index Bits 25-20 (six bits): slot index Bits 19-16 (four bits): subboard index Bits 15-0 (16 bits): all F When the index is all F, it indicates that the statistics of all the channels…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.9.1.1
hwMgDspStatisticsTotalNum Indicates the total number of DSP channels.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.9.1.2
hwMgDspStatisticsFreeNum Indicates the number of idle channels.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.9.1.3
hwMgDspStatisticsG711Num Indicates the number of occupied DSP channels of the G.711.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.9.1.4
hwMgDspStatisticsAllNum Indicates the number of occupied DSP channels of the full rate.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.9.1.5
hwMgDspStatisticsWastageNum Indicates the number of DSP channels of the wastage.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.9.1.6
hwMgDspStatisticsFaultNum Indicates the number of faulty DSP channels.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.9.1.7
hwMgDspStatisticsLoopNum Indicates the number of DSP channels in the loopback.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.9.1.8
hwMgDspStatisticsForbiddenNum Indicates the number of prohibited DSP channels.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.9.1.9
hwMgDspSystemReserveddeprecated Reserved for the system.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.9.1.10

This table is used to set the ring type mapping.
The indexes of this table are hwMgRingTypeMapMgId, hwMgRingTypeMapRingId.

hwMgRingTypeMapEntry row .1.3.6.1.4.1.2011.6.36.1.11.1

This table is used to set the ring type mapping.
The indexes of this entry are hwMgRingTypeMapMgId, hwMgRingTypeMapRingId.

Indexes

hwMgRingTypeMapMgId hwMgRingTypeMapRingId

Column	Syntax	OID
hwMgRingTypeMapMgId Indicates the MG ID. The range of MG ID from 0 to 16777215 is for AG system, value of 33554431 is only for PBX system and the value input from 16777215 to 33554431 is invalid.	Integer32 Constraints: range: 0-33554431	.1.3.6.1.4.1.2011.6.36.1.11.1.1
hwMgRingTypeMapRingId Indicates the ring ID. The range of ring ID from 0 to 15 is for AG system,When the system is PBX the range of ring ID is 0 to 15,and 255 is also valid. When the value is 255 and row status is 4, means the system allo…	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.2011.6.36.1.11.1.2
hwMgRingTypeMapCascadeRingType Indicates the cadence ring type. Enumerated types: 1-Null, 2-Normal ring 1:4, 3-Special ring 1:2, 4-Special ring 0.4:0.2:0.4:4, 5-Long ring, 6-Special ring 1.2:2, 7-HK ring 1:3, 8-HK CNTRX 0.4:0.2:0.4:0.2:0.4:3.0, 9-H…	Integer32r/w Constraints: range: 1-31	.1.3.6.1.4.1.2011.6.36.1.11.1.3
hwMgRingTypeMapInitRingType Indicates the initial ring type. Enumeration type: 1-Null, 2-Normal ring (FSK) 1:4, 3-Special ring (FSK) 1:2, 4-Special ring (FSK) 0.4:0.2:0.4:4, 5-Special ring (FSK) 1.2:2, 6-HK ring (FSK) 1:3, 7-HK CNTRX (FSK) 0.4:0…	Integer32r/w Constraints: range: 1-28	.1.3.6.1.4.1.2011.6.36.1.11.1.4
hwMgRingTypeMapRowStatus Indicates the row status (the SIP supports only 4 and 6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.36.1.11.1.5
hwMgRingTypeMapName Indicates the ring type mapping name.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2011.6.36.1.11.1.6

This table is use to query the information in the call.
The index of this table is hwMgCallInfoIndex.

hwMgCallInfoEntry row .1.3.6.1.4.1.2011.6.36.1.12.1

This table is use to query the information in the call.
The index of this entry is hwMgCallInfoIndex.

Indexes

hwMgCallInfoIndex

Column	Syntax	OID
hwMgCallInfoIndex Indicates the shelf/slot/port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.1
hwMgCallInfoRTPPort Indicates the local RTP port.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2011.6.36.1.12.1.2
hwMgCallInfoDSPPlace Indicates the DSP channel (the shelf/slot/channel index).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.3
hwMgCallInfoCodec Indicates the enumerated definition of the VoiceCode. Note that several items in the enumerated definition are not consecutive. In the definition below, G723Low(16) and G723High(17) need not be distinguished and can be …	Enumeration Enumerated Values: 1 g711U 2 reserved2 3 g72632k 4 reserved4 5 g7231 6 reserved6 7 reserved7 8 reserved8 9 g711A 10 g722 11 reserved11 12 reserved12 13 reserved13 14 silence 15 reserved15 16 g728 17 reserved17 18 reserved18 19 g729 20 reserved20 21 g723LOW 22 reserved22 23 reserved23 24 reserved24 25 reserved25 26 reserved26 27 reserved27 28 reserved28 29 reserved29 30 reserved30 31 reserved31 32 reserved32 33 reserved33 34 reserved34 35 reserved35 36 reserved36 37 reserved37 38 reserved38 39 reserved39 40 reserved40 41 reserved41 42 reserved42 43 reserved43 44 reserved44 45 reserved45 46 reserved46 47 reserved47 48 reserved48 49 reserved49 50 reserved50 51 amr475 52 amr515 53 amr59 54 amr67 55 amr74 56 amr795 57 amr102 58 amr122 59 t38Fax 60 g72616k 61 g72624k 62 g72640k	.1.3.6.1.4.1.2011.6.36.1.12.1.4
hwMgCallInfoPackagTime Indicates the codex packetizing duration.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.5
hwMgCallInfoVAD Indicates voice activity detection. Options: 1. true(1) -detect voice activity 2. false(2) -not detect voice activity	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.2011.6.36.1.12.1.6
hwMgCallInfoEC Indicates echo cancel. Options: 1. true(1) -echo cancel 2. false(2) -disable echo cancel	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.2011.6.36.1.12.1.7
hwMgCallInfoJitBuffer Indicates the local JitBuffer value.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.8
hwMgCallInfoTransGain Indicates the transmit gain (0-20 correspond to -10 dB to +10 dB).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.9
hwMgCallInfoRecvGain Indicates the receive gain (0-15 correspond to -10 dB to +5 dB).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.10
hwMgCallInfoRemoteRTPPort Indicates the remote RTP port.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2011.6.36.1.12.1.11
hwMgCallInfoLocalIP Indicates the local IP address. The value 255.255.255.255 is returned if the entry is invalid.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.36.1.12.1.12
hwMgCallInfoRemoteIP Indicates the remote IP address. The value 255.255.255.255 is returned if the entry is invalid.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.36.1.12.1.13
hwMgCallInfoDuration Indicates the occupied duration. Unit: second	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.14
hwMgCallInfoRTCPState Indicates the RTCP status (whether it is enabled). Options: 1. on(1) -enable rtcp 2. off(2) -disable rtcp 3. notReported(3) -not report rtcp	Enumeration Enumerated Values: 1 on 2 off 3 notReported	.1.3.6.1.4.1.2011.6.36.1.12.1.15
hwMgCallInfoRmtPackagTime Indicates the remote packetizing duration.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.16
hwMgCallInfoRcvPackageNum Indicates the count of received packets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.17
hwMgCallInfoSndPackageNum Indicates the count of sent packets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.18
hwMgCallInfoRcvOctsNum Indicates the count of received octets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.19
hwMgCallInfoSndOctsNum Indicates the count of sent octets.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.20
hwMgCallInfoLoopDelay Indicates the loop delay. Unit: millisecond	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.21
hwMgCallInfoLocalJitter Indicates the local Jitter. Unit: millisecond	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.22
hwMgCallInfoRmtJitter Indicates the remote Jitter. Unit: millisecond	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.23
hwMgCallInfoLocalLossRate Indicates the local packet loss rate (%). 1 means 1%.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.24
hwMgCallInfoRmtLossRate Indicates the remote packet loss rate (%). 1 means 1%.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.25
hwMgCallInfoMos MOS(MOS:Mean Opinion Score) value.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.26
hwMgCallInfoVlanID Vlan ID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.27
hwMgCallInfoVlanPriority Vlan priority.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.28
hwMgCallInfoQoSStrategy QoS strategy.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.29
hwMgCallInfoQoSValue QoS value.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.30
hwMgCallInfoNplr Network Packet Loss Rate(%). 1 means 1%.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.31
hwMgCallInfoJdr Jitter Buffer Discard Rate(%). 1 means 1%.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.32
hwMgCallInfoRtd RTCP Round-Trip Delay. Unit: millisecond	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.33
hwMgCallInfoEsd End System Delay. Unit: millisecond	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.34
hwMgCallInfoSl Signal Level. Unit: db	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.35
hwMgCallInfoNl Noise Level. Unit: db	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.36
hwMgCallInfoRerl Residual Echo Return Loss. Unit: db	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.37
hwMgCallInfoRFactor R Factor. Range: 0-100	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.38
hwMgCallInfoMoslq Estimated MOSLQ(a voice quality metric on a scale from 1 to 5).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.39
hwMgCallInfoBld Burst Loss Density(%). 1 means 1%.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.40
hwMgCallInfoGd Gap Duration. Unit: millisecond	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.41
hwMgCallInfoBd Burst Duration. Unit: millisecond	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.42
hwMgCallInfoGld Gap Loss Density(%). 1 means 1%.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.12.1.43

This table is used to query the statistics of online subscribers.
The index of this table is hwUserStatisticMgId.

hwUserStatisticEntry row .1.3.6.1.4.1.2011.6.36.1.36.1

This table is used to query the statistics of online subscribers.
The index of this entry is hwUserStatisticMgId.

Indexes

hwUserStatisticMgId

Column	Syntax	OID
hwUserStatisticMgId Indicates the MG ID.	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2011.6.36.1.36.1.1
hwUserStatisticPstn Indicates the count of online PSTN subscribers.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.36.1.2
hwUserStatisticFax Indicates the count of online fax subscribers.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.36.1.3
hwUserStatisticModem Indicates the count of online modem subscribers.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.36.1.4
hwUserStatisticBra Indicates the count of online BRA subscribers.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.36.1.5
hwUserStatisticPra Indicates the count of online PRA subscribers.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.36.1.6
hwUserStatisticDpnss Indicates the count of online DPNSS subscribers.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.36.1.7
hwUserStatisticDass2 Indicates the count of online DASS2 subscribers.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.36.1.8
hwUserStatisticR2 Indicates the count of online R2 subscribers.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.36.1.9

This table is used to config the E2E tracing task.
The index of this table is hwE2ETraceTaskID.

hwE2ETraceTaskEntry row .1.3.6.1.4.1.2011.6.36.1.45.1

This table is used to config the E2E tracing task.
The index of this entry is hwE2ETraceTaskID.

Indexes

hwE2ETraceTaskID

Column	Syntax	OID
hwE2ETraceTaskID Indicates the tracing task ID. Bit 31 (1 bit): 0 Bit 30 (1 bit): the protocol type (1-H.248; 0-MGCP) Bits 29-16 (14 bits): the terminal ID Bits 15-0 (16 bits): the RID that is delivered by the softswitch	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2011.6.36.1.45.1.1
hwE2ETraceTaskOperType Indicates the operation type. Options: 1. delete(1) -delete	Enumerationr/w Enumerated Values: 1 delete	.1.3.6.1.4.1.2011.6.36.1.45.1.2
hwE2ETraceTaskSessionID Indicates the session ID.	Integer32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.6.36.1.45.1.3
hwE2ETraceTaskMsgReptCyc Indicates the message reporting period.	Integer32 Constraints: range: 30-4294967295	.1.3.6.1.4.1.2011.6.36.1.45.1.4
hwE2ETraceTaskChkCyc Indicates the task checking period.	Integer32 Constraints: range: 30-4294967295	.1.3.6.1.4.1.2011.6.36.1.45.1.5
hwE2ETraceTaskMsgType Indicates the message type. Options: 1. h248(24) -H.248 2. mgcp(25) -MGCP	Enumeration Enumerated Values: 24 h248 25 mgcp	.1.3.6.1.4.1.2011.6.36.1.45.1.6
hwE2ETraceTaskFTPLnkState Indicates the FTP connection status. Options: 1. establishing(0) -establishing 2. data(1) -transfering data 3. trying(2) -trying 4. releasing(3) -releasing 5. idle(4) -idle	Enumeration Enumerated Values: 0 establishing 1 data 2 trying 3 releasing 4 idle	.1.3.6.1.4.1.2011.6.36.1.45.1.7
hwE2ETraceTaskURLInfoPort Indicates the port number of the URL message.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2011.6.36.1.45.1.8
hwE2ETraceTaskURLInfoIP Indicates the IP address of the URL message.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.36.1.45.1.9
hwE2ETraceTaskURLInfoPath Indicates the path of the URL message.	OctetString Constraints: range: 1-256	.1.3.6.1.4.1.2011.6.36.1.45.1.10
hwE2ETraceTaskURLInfoFileName Indicates the file name of the URL message.	OctetString Constraints: range: 1-128	.1.3.6.1.4.1.2011.6.36.1.45.1.11
hwE2ETraceTaskUserMgID Indicates the interface ID of the subscriber traced by the tracing task.	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2011.6.36.1.45.1.12
hwE2ETraceTaskUserTerminationID Indicates the terminal ID of the tracing task subscriber.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.2011.6.36.1.45.1.13

This table is used to config terminal ID template.
The index of this table is hwTidTemplateId.

hwTidTemplateConfigEntry row .1.3.6.1.4.1.2011.6.36.1.65.1

This table is used to config terminal ID template.
The index of this entry is hwTidTemplateId.

Indexes

hwTidTemplateId

Column	Syntax	OID
hwTidTemplateId Indicates the TID profile index. TID profiles 0-18 are the default profiles in the system. The default TID profiles can be referenced but can not be added, modified or deleted. TID profiles 19-31 are reserved in the sys…	Integer32 Constraints: range: 0-63	.1.3.6.1.4.1.2011.6.36.1.65.1.1
hwTidFormat Indicates the format string of the TID profile.	OctetStringr/w Constraints: range: 2-64	.1.3.6.1.4.1.2011.6.36.1.65.1.2
hwTidParameterlist Indicates the parameter list of the TID profile.	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.2011.6.36.1.65.1.3
hwTidTemplateName Indicates the TID profile name. The profile name must be unique.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.2011.6.36.1.65.1.4
hwTidTemplateRowStatus Indicates the row status of the TID profile. Profiles 0-31 cannot be added, deleted, or modified.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.36.1.65.1.5
hwIsNeedToConfigTID Indicates whether the TID needs to be input when adding the subscriber who uses this profile. Options: 1. no(1) -TID needs not to be input when adding the subscriber 2. yes(2) -TID must be input when adding the subscr…	Enumeration Enumerated Values: 1 no 2 yes	.1.3.6.1.4.1.2011.6.36.1.65.1.6

This table is used to config the fax parameter.
The index of this table is hwFaxParaVgwId.

hwFaxParaEntry row .1.3.6.1.4.1.2011.6.36.1.69.1.1

This table is used to config the fax parameter.
The index of this entry is hwFaxParaVgwId.

Indexes

hwFaxParaVgwId

Column	Syntax	OID
hwFaxParaVgwId Indicates the interface ID.	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2011.6.36.1.69.1.1.1
hwFaxModedeprecated Indicates the fax transmission mode. 1-Transparent transmission; 2-Auto-negotiation T.38; 3-V3 flow; 4-Stand-alone transparent transmission; 5-V5 flow; 6-Self-switch T.38. To be compatible with the previous versions, th…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.69.1.1.2
hwFaxPacketInterval10ms Enable packet interval of fax to use only 10ms or not. Options: 1. enable(1) -enable 2. disable(2) -disable	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.36.1.69.1.1.3
hwFaxRedundancyFlagdeprecated Use fax redundancy parameter or not .1:enable,to use. 2:disable,not to use. This leaf only valid in sip transparent fax.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.69.1.1.4
hwFaxNegoMode The negotiate mode of fax. Options: 1. negotiate(1) -negotiate 2. selfswitch(2) -do not negotiate	Enumerationr/w Enumerated Values: 1 negotiate 2 selfswitch	.1.3.6.1.4.1.2011.6.36.1.69.1.1.5
hwFaxTransMode Indicates the fax transmission mode. Options: 1. thoroughly(1) -use voice codec 2. t38(2) - use T.38 codec Default: thoroughly(1)	Enumerationr/w Enumerated Values: 1 thoroughly 2 t38	.1.3.6.1.4.1.2011.6.36.1.69.1.1.6
hwFaxRfc2198NegoModedeprecated Use fax redundancy parameter or not. Options: 1. negoStart(1) -negotiate start 2. fixedStart(2) -fixed start 3. noInitiativeStart(3) -no Initiative Start	Enumerationr/w Enumerated Values: 1 negoStart 2 fixedStart 3 noInitiativeStart	.1.3.6.1.4.1.2011.6.36.1.69.1.1.7
hwFaxRfc2198StartModedeprecated Whether the fax support the RFC2198 Smart Startup. Options: 1. smart2198(1) -smart start 2198 2. ordinary2198(2) -ordinary 2198	Enumerationr/w Enumerated Values: 1 smart2198 2 ordinary2198	.1.3.6.1.4.1.2011.6.36.1.69.1.1.8
hwFaxParaVbdCodec Indicates the codec of VBD. Options: 1. g711A(1) -G.711A 2. g711U(2) -G.711U	Enumerationr/w Enumerated Values: 1 g711A 2 g711U	.1.3.6.1.4.1.2011.6.36.1.69.1.1.9
hwFaxParaVbdPtType Indicates the payload type of VBD. Options: 1. static(1) -static payload type 2. dynamic(2) -dynamic payload type	Enumerationr/w Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.2011.6.36.1.69.1.1.10
hwFaxTransEventTypedeprecated Indicates the mode of sending fax event, whether support the RFC2833. Options: 1. negoStart(1) -negotiation start 2. fixedStart(2) -fix start 3. noInitiativeStart(3) -not initiative start	Enumerationr/w Enumerated Values: 1 negoStart 2 fixedStart 3 noInitiativeStart	.1.3.6.1.4.1.2011.6.36.1.69.1.1.11
hwFaxVbdAttributeType Indicate the format of session attribute lines when starting fax VBD Negotiation. Options: 1. v152(1) -v.152 format 2. chinatelecom(2) -chinatelecom format 3. extchinatelecom(3) -extchinatelecom format 4. ietf(4) -ietf …	Enumerationr/w Enumerated Values: 1 v152 2 chinatelecom 3 extchinatelecom 4 ietf	.1.3.6.1.4.1.2011.6.36.1.69.1.1.12
hwFaxRtpInterval Indicates the default RTP packet time of DSP channel. Options: 1. packettime5ms(1) -5ms 2. packettime10ms(2) -10ms 3. packettime20ms(3) -20ms 4. packettime30ms(4) -30ms Unit: millisecond	Enumerationr/w Enumerated Values: 1 packettime5ms 2 packettime10ms 3 packettime20ms 4 packettime30ms	.1.3.6.1.4.1.2011.6.36.1.69.1.1.13

This table is used to config the modem parameter.
The index of this table is hwModemParaVgwId.

hwModemParaEntry row .1.3.6.1.4.1.2011.6.36.1.69.2.1

This table is used to config the modem parameter.
The index of this entry is hwModemParaVgwId.

Indexes

hwModemParaVgwId

Column	Syntax	OID
hwModemParaVgwId Indicates the interface ID.	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2011.6.36.1.69.2.1.1
hwModemModedeprecated Indicates the modem transmission mode. 1-Negotiation mode; 2-Stand-alone mode.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.69.2.1.2
hwModemRedundancyFlagdeprecated Indicates the flag of using the modem redundancy parameter. 1-enable; 2-disable .	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.69.2.1.3
hwModemPacketInterval10ms Enable packet interval of modem to use only 10ms or not. Options: 1. enable(1) -enable 2. disable(2) -disable	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.36.1.69.2.1.4
hwModemNegoMode The negotiate mode of fax. Options: 1. negotiate(1) -negotiate 2. selfswitch(2) -do not negotiate	Enumerationr/w Enumerated Values: 1 negotiate 2 selfswitch	.1.3.6.1.4.1.2011.6.36.1.69.2.1.5
hwModemTransMode Indicates the fax transmission mode. Options: 1. thoroughly(1) -thoroughly transmission 2. relay(2) -Relay mode Default: thoroughly(1)	Enumerationr/w Enumerated Values: 1 thoroughly 2 relay	.1.3.6.1.4.1.2011.6.36.1.69.2.1.6
hwModemRfc2198NegoModedeprecated Use modem redundancy parameter or not. Options: 1. negoStart(1) -negotiate start 2. fixedStart(2) -fixed start 3. noInitiativeStart(3) -no initiative start	Enumerationr/w Enumerated Values: 1 negoStart 2 fixedStart 3 noInitiativeStart	.1.3.6.1.4.1.2011.6.36.1.69.2.1.7
hwModemRfc2198StartModedeprecated whether the modem support the RFC2198 Smart Startup. Options: 1. smart2198(1) -smart 2198 2. ordinary2198(2) -ordinary 2198	Enumerationr/w Enumerated Values: 1 smart2198 2 ordinary2198	.1.3.6.1.4.1.2011.6.36.1.69.2.1.8
hwModemParaVbdCodec Indicates the codec of VBD. Options: 1. g711A(1) -G.711A 2. g711U(2) -G.711U	Enumerationr/w Enumerated Values: 1 g711A 2 g711U	.1.3.6.1.4.1.2011.6.36.1.69.2.1.9
hwModemParaVbdPtType Indicates the payload type of VBD. Options: 1. static(1) -static payload type 2. dynamic(2) -dynamic payload type	Enumerationr/w Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.2011.6.36.1.69.2.1.10
hwModemTransEventTypedeprecated Indicates the mode of sending fax event, whether support the RFC2833. Options: 1. negoStart(1) -negotiate start 2. fixedStart(2) -fixed start 3. noInitiativeStart(3) -no initiative start	Enumerationr/w Enumerated Values: 1 negoStart 2 fixedStart 3 noInitiativeStart	.1.3.6.1.4.1.2011.6.36.1.69.2.1.11
hwModemVbdAttributeType Indicate the format of session attribute lines when starting modem VBD Negotiation. Options: 1. v152(1) -V.152 2. chinatelecom(2) -china telecom 3. extchinatelecom(3) -extend china telecom 4. ietf(4) -ietf	Enumerationr/w Enumerated Values: 1 v152 2 chinatelecom 3 extchinatelecom 4 ietf	.1.3.6.1.4.1.2011.6.36.1.69.2.1.12
hwModemRtpInterval Indicates the default RTP packet time of DSP channel. Options: 1. packettime5ms(1) -5ms 2. packettime10ms(2) -10ms 3. packettime20ms(3) -20ms 4. packettime30ms(4) -30ms Unit: millisecond	Enumerationr/w Enumerated Values: 1 packettime5ms 2 packettime10ms 3 packettime20ms 4 packettime30ms	.1.3.6.1.4.1.2011.6.36.1.69.2.1.13
hwModemParaDtmfFallbackVoice Enable fallback to voice mode or not, when detect DTMF from IP side. Options: 1. enable(1) -enable 2. disable(2) -disable	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.36.1.69.2.1.14

This table is used to config the rfc2833 parameter.
The index of this table is hwRfc2833VgwId.

hwRfc2833Entry row .1.3.6.1.4.1.2011.6.36.1.69.3.1

This table is used to config the rfc2833 parameter.
The index of this entry is hwRfc2833VgwId.

Indexes

hwRfc2833VgwId

Column	Syntax	OID
hwRfc2833VgwId Indicates the interface ID.	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2011.6.36.1.69.3.1.1
hwRfc2833NegoMode Indicates the start mode of the rfc2833. Options: 1. negoStart(1) -negotiate start 2. fixedStart(2) -fixed start 3. noInitiativeStart(3) -no initiative start	Enumerationr/w Enumerated Values: 1 negoStart 2 fixedStart 3 noInitiativeStart	.1.3.6.1.4.1.2011.6.36.1.69.3.1.2
hwRfc2833FaxModem Indicates the flag of fax and modem event using rfc2833 parameter. Options: 1. enable(1) -enable 2. disable(2) -disable Default: enable(1)	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.36.1.69.3.1.3
hwRfc2833FlashHook Indicates the flag of flash hook event using rfc2833 parameter. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.36.1.69.3.1.4
hwRfc2833Dtmf Indicates the flag of dtmf using rfc2833 parameter. Options: 1. enable(1) -enable 2. disable(2) -disable Default: enable(1)	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.36.1.69.3.1.5
hwRfcComplied Indicates the type of RFC standard compliance. Options: 1. rfc2833(1) - comply with RFC2833 2. rfc4733(2) - comply with RFC4733 Default: rfc2833(1)	Enumerationr/w Enumerated Values: 1 rfc2833 2 rfc4733	.1.3.6.1.4.1.2011.6.36.1.69.3.1.6

This table is used to config the rfc2198 parameter.
The index of this table is hwRfc2198VgwId.

hwRfc2198Entry row .1.3.6.1.4.1.2011.6.36.1.69.4.1

This table is used to config the rfc2198 parameter.
The index of this entry is hwRfc2198VgwId.

Indexes

hwRfc2198VgwId

Column	Syntax	OID
hwRfc2198VgwId Indicates the interface ID.	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2011.6.36.1.69.4.1.1
hwRfc2198NegoMode Indicates the start mode of the rfc2198. Options: 1. negoStart(1) -negotiate start 2. fixedStart(2) -fixed start 3. noInitiativeStart(3) -no initiative start	Enumerationr/w Enumerated Values: 1 negoStart 2 fixedStart 3 noInitiativeStart	.1.3.6.1.4.1.2011.6.36.1.69.4.1.2
hwRfc2198StartMode Indicates the start mode of the rfc2198. Options: 1. smart2198(1) -smart start RFC2198 2. ordinary2198(2) -start RFC2198 ordinary	Enumerationr/w Enumerated Values: 1 smart2198 2 ordinary2198	.1.3.6.1.4.1.2011.6.36.1.69.4.1.3
hwRfc2198Rfc2833 Indicates the flag of rfc2833 with using rfc2198. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.36.1.69.4.1.4
hwRfc2198Vbd Indicates the flag of the VBD using rfc2198. Options: 1. enable(1) -enable 2. disable(2) -disable	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.36.1.69.4.1.5
hwRfc2198Voice Indicates the flag of voice using rfc2198. Options: 1. enable(1) -enable 2. disable(2) -disable	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.36.1.69.4.1.6

This table is used to config the dtmf parameter.
The index of this table is hwDtmfVgwId.

hwDtmfParaEntry row .1.3.6.1.4.1.2011.6.36.1.69.5.1

This table is used to config the dtmf parameter.
The index of this entry is hwDtmfVgwId.

Indexes

hwDtmfVgwId

Column	Syntax	OID
hwDtmfVgwId Indicates the interface ID.	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2011.6.36.1.69.5.1.1
hwDtmfTransMode Indicates the transmission mode of DTMF. Options: 1. thoroughly(1) -transparent transmission 2. erase(2) -erase DTMF Default: thoroughly(1)	Enumerationr/w Enumerated Values: 1 thoroughly 2 erase	.1.3.6.1.4.1.2011.6.36.1.69.5.1.2

This table is used to config the binding between service number and DSP parameters template.
The index of this table is hwServiceNumMap.

hwServiceNumCfgEntry row .1.3.6.1.4.1.2011.6.36.1.154.1

This table is used to config the binding between service number and DSP parameters template.
The index of this entry is hwServiceNumMap.

Indexes

hwServiceNumMap

Column	Syntax	OID
hwServiceNumMap Indicates the service number digital map.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.2011.6.36.1.154.1.1
hwDspParaTemplateName Indicates the dsp parameters template name	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.2011.6.36.1.154.1.2
hwServiceNumRowStatus Indicates the row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.36.1.154.1.3

This table is used to config the dsp parameters template.
The index of this table is hwDspTemplateName.

hwDspParaTemplateCfgEntry row .1.3.6.1.4.1.2011.6.36.1.155.1

This table is used to config the dsp parameters template.
The index of this entry is hwDspTemplateName.

Indexes

hwDspTemplateName

Column	Syntax	OID
hwDspTemplateName Indicates the dsp parameters template name.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.2011.6.36.1.155.1.1
hwDspEc Indicates the echo cotrol. Options: 1. open(1) -open 2. close(2) -close 3. invalid(256) -invalid value, use global config Default: invalid(256)	Enumerationr/w Enumerated Values: 1 open 2 close 256 invalid	.1.3.6.1.4.1.2011.6.36.1.155.1.2
hwDspJbMode Indicates the jitterbuffer mode. Options: 1. adapted(1) -adapted mode 2. fixed(2) -fixed mode 3. invalid(256) -invalid value, use global config Default: invalid(256)	Enumerationr/w Enumerated Values: 1 adapted 2 fixed 256 invalid	.1.3.6.1.4.1.2011.6.36.1.155.1.3
hwDspNlp Indicates the NLP mode. Options: 1. close(1) -close mode 2. normal(2) -normal mode 3. enhanced(3) -enhanced mode 4. reduced(4) -reduced mode 5. ecgain(5) -ecgain mode 6. dtmfec(6) -DTMF echo elimination mode 7. inva…	Enumerationr/w Enumerated Values: 1 close 2 normal 3 enhanced 4 reduced 5 ecgain 6 dtmfec 256 invalid	.1.3.6.1.4.1.2011.6.36.1.155.1.4
hwDspWorkMode Indicates the dsp workmode. Options: 1. voice(1) -voice mode 2. fax(2) -fax mode 3. modem(3) -modem mode 4. invalid(256) -invalid value, use global config Default: invalid(256)	Enumerationr/w Enumerated Values: 1 voice 2 fax 3 modem 256 invalid	.1.3.6.1.4.1.2011.6.36.1.155.1.5
hwDspSc Indicates the silence cotrol. Options: 1. open(1)-open 2. close(2) -close 3. invalid(256)-invalid value, use global config Default: invalid(256)	Enumerationr/w Enumerated Values: 1 open 2 close 256 invalid	.1.3.6.1.4.1.2011.6.36.1.155.1.6
hwDspTemplateRowStatus Indicates the row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.36.1.155.1.7
hwDspInputGain Indicates the input gain of DSP chip: -1 -- invalid value, use global config 0-15 -- correspond to -10 dB to +5 dB Default: -1	Integer32r/w Constraints: range: -1-15	.1.3.6.1.4.1.2011.6.36.1.155.1.8
hwDspOutputGain Indicates the output gain of DSP chip: -1 -- invalid value, use global config; 0-20 -- correspond to -10 dB to +10 dB; Default: -1	Integer32r/w Constraints: range: -1-20	.1.3.6.1.4.1.2011.6.36.1.155.1.9
hwDspDtmfPara Indicates the transmission mode of DTMF. Options: 1. globalConfig(1) -global config; 2. rfc2833(2) -2833 transmission; 3. erase(3) -erase DTMF; 4. rfc2833with2198(4) -2833with2198. Default: globalConfig(1)	Enumerationr/w Enumerated Values: 1 globalConfig 2 rfc2833 3 erase 4 rfc2833with2198	.1.3.6.1.4.1.2011.6.36.1.155.1.10
hwDsp2833ForDataevent Indicates the mode of sending fax/modem event. Options: 1. enable(1) -2833 2. globalConfig(2) -global config Default: globalConfig(2)	Enumerationr/w Enumerated Values: 1 enable 2 globalConfig	.1.3.6.1.4.1.2011.6.36.1.155.1.11
hwDspSpecialFlow Indicates the dsp special flow. 0 -- intelligent telephone special flow: filter RTP messages and only processs 2833 messages 1 -- intelligent telephone special flow: only processs DTMF events in 2833 messages 2 -- EC sp…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.6.36.1.155.1.12
hwDsp2198ForVbd Flag of locally starting the 2198 redundancy VBD function. Options: 1. enable(1) -enable 2198 for vbd 2. globalConfig(2) -global config: use the global config	Enumerationr/w Enumerated Values: 1 enable 2 globalConfig	.1.3.6.1.4.1.2011.6.36.1.155.1.13
hwDspTemplateFixedJbUpImmediately Enable dsp fixed JB adjust upward immediately or not. Options: 1. enable(1) -enable 2. disable(2) -disable 3. invalid(256)-invalid value, use global config Default: invalid(256)	Enumerationr/w Enumerated Values: 1 enable 2 disable 256 invalid	.1.3.6.1.4.1.2011.6.36.1.155.1.14
hwDsp2198ForVoice Flag of locally starting the 2198 redundancy VOICE function. Options: 1. enable(1) -enable 2198 for voice 2. globalConfig(2) -global config: use the global config	Enumerationr/w Enumerated Values: 1 enable 2 globalConfig	.1.3.6.1.4.1.2011.6.36.1.155.1.15

This table is used to config local global digitmap for sip and h248 interface. 
The indexes of this table are hwPreDigitMapName, hwPreDigitMapSliceNo.

hwPreDigitMapConfigEntry row .1.3.6.1.4.1.2011.6.36.1.156.1

This table is used to config local global digitmap for sip and h248 interface.
The indexes of this entry are hwPreDigitMapName, hwPreDigitMapSliceNo.

Indexes

hwPreDigitMapName hwPreDigitMapSliceNo

Column	Syntax	OID
hwPreDigitMapName Indicates the digitmap name.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.2011.6.36.1.156.1.1
hwPreDigitMapSliceNo Serial number for slice. High 8 bits for total number of slices, low 8 bits for sequence number of slices.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.2011.6.36.1.156.1.2
hwPreDigitMapNewName Indicates the new digitmap name. used for modifing digitmap name.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.2011.6.36.1.156.1.3
hwPreDigitMapType Indicate digit map type. For SIP it may be normal(1), emergency(2), scc(3), directCentrex(4), secondCentrex(5). For H248 it should only be normal(1). Options: 1. normal(1) -normal 2. emergency(2) -emergency 3. scc(3) …	Enumerationr/w Enumerated Values: 1 normal 2 emergency 3 scc 4 directCentrex 5 secondCentrex	.1.3.6.1.4.1.2011.6.36.1.156.1.4
hwPreDigitMapBody Indicate body of DigitMap, use by add,modify,delete operation.	OctetStringr/w Constraints: range: 1-256	.1.3.6.1.4.1.2011.6.36.1.156.1.5
hwPreDigitMapRowStatus Indicates the row status of the PreDigitMap.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.36.1.156.1.6
hwPreDigitMapTotalSlice Indicates the total slice of the PreDigitMap.	Unsigned32 Constraints: range: 0-254	.1.3.6.1.4.1.2011.6.36.1.156.1.7
hwPreDigitMapProtocol Indicates the digitmap protocol. Options: 1. h248(1) -h248 protocol 2. sip(2) -sip protocol	Enumerationr/w Enumerated Values: 1 h248 2 sip	.1.3.6.1.4.1.2011.6.36.1.156.1.8

This table is used to query the voip dynamic media and signal IP name.
The indexes of this table are hwVoipDynIPNameType, hwVoipDynIPNameIndex.

hwVoipDynIPNameEntry row .1.3.6.1.4.1.2011.6.36.1.157.1

This table is used to query the voip dynamic media and signal IP name.
The indexes of this entry are hwVoipDynIPNameType, hwVoipDynIPNameIndex.

Indexes

hwVoipDynIPNameType hwVoipDynIPNameIndex

Column	Syntax	OID
hwVoipDynIPNameType Indicates dynamic IP name type. Options: 1. mediaIP(1) -dynamic media IP name 2. signalIP(2) -dynamic signal IP name	Enumeration Enumerated Values: 1 mediaIP 2 signalIP	.1.3.6.1.4.1.2011.6.36.1.157.1.1
hwVoipDynIPNameIndex Indicates dynamic IP name list index.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.2011.6.36.1.157.1.2
hwVoipDynIPName Indicates dynamic media IP name.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.2011.6.36.1.157.1.3

This table is used to set the tls attribute.
The index of this table is hwTlsParaInterfaceId.

hwTlsParaCfgEntry row .1.3.6.1.4.1.2011.6.36.1.185.1

This table is used to set the tls attribute.
The index of this entry is hwTlsParaInterfaceId.

Indexes

hwTlsParaInterfaceId

Column	Syntax	OID
hwTlsParaInterfaceId Indicates the MG ID. The range of MG ID from 0 to 16777215 is for AG system, value of 33554431 is only for PBX system and the value input from 16777215 to 33554431 is invalid.	Integer32 Constraints: range: 0-33554431	.1.3.6.1.4.1.2011.6.36.1.185.1.1
hwTlsParaTlsVersion Indicates the version of TLS. Options: 1. tlsv10(1) -TLS v1.0 2. tlsv11(2) -TLS v1.1 3. auto-negotiate(3) -auto negotiate Default: auto-negotiate(3)	Enumerationr/w Enumerated Values: 1 tlsv10 2 tlsv11 3 auto-negotiate	.1.3.6.1.4.1.2011.6.36.1.185.1.2
hwTlsParaAuthMode Indicates the authentication mode of TLS. Options: 1. anonymous(1) -Anonymous 2. server(2) -Server 3. client(3) -Client 4. both(4) -Both Default: anonymous(1)	Enumerationr/w Enumerated Values: 1 anonymous 2 server 3 client 4 both	.1.3.6.1.4.1.2011.6.36.1.185.1.3
hwTlsParaRootCA Indicates the name of root certificate.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2011.6.36.1.185.1.4
hwTlsParaCert Indicates the name of certificate.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2011.6.36.1.185.1.5
hwTlsParaKey Indicates the name of key.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2011.6.36.1.185.1.6

This table is used to display the tls running information.
The index of this table is hwTlsRunStateInfoSessionID.

hwTlsRunStateInfoEntry row .1.3.6.1.4.1.2011.6.36.1.186.1

This table is used to display the tls running information.
The index of this entry is hwTlsRunStateInfoSessionID.

Indexes

hwTlsRunStateInfoSessionID

Column	Syntax	OID
hwTlsRunStateInfoSessionID TLS session ID Constructed by Protocol-Type, Proxy-index, SIP-Interface-ID; Format:xyzzzzzz(Hex) a) x for Protocol-Type: SIP(0); b) y for Proxy-index: SIP Proxy index; c) z for SIP-Interface-ID: zzzzzz for SIP interfa…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.186.1.1
hwTlsRunStateInfoVersion Indicates the version of TLS. Options: 1. tlsv10(1) -TLS v1.0 2. tlsv11(2) -TLS v1.1 3. auto-negotiate(3) -auto negotiate	Enumeration Enumerated Values: 1 tlsv10 2 tlsv11 3 auto-negotiate	.1.3.6.1.4.1.2011.6.36.1.186.1.2
hwTlsRunStateInfoAuthMode Indicates the authentication mode of TLS. Options: 1. anonymous(1) -Anonymous 2. server(2) -Server 3. client(3) -Client 4. both(4) -Both	Enumeration Enumerated Values: 1 anonymous 2 server 3 client 4 both	.1.3.6.1.4.1.2011.6.36.1.186.1.3
hwTlsRunStateInfoRootCA Indicates the name of root certificate.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.2011.6.36.1.186.1.4
hwTlsRunStateInfoCert Indicates the name of client certificate.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.2011.6.36.1.186.1.5
hwTlsRunStateInfoKey Indicates the name of client key.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.2011.6.36.1.186.1.6
hwTlsRunStateInfoState Indicates the state of handshake. Options: 1. idle(1) -Idle 2. handshaking(2) -Handshaking 3. handshakeSuccess(3) -HandshakeSuccess 4. handshakeFailure(4) -HandshakeFailure	Enumeration Enumerated Values: 1 idle 2 handshaking 3 handshakeSuccess 4 handshakeFailure	.1.3.6.1.4.1.2011.6.36.1.186.1.7
hwTlsRunStateInfoCurrentCipher Indicates the name of cipher.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.2011.6.36.1.186.1.8

This table is used to config and query the certificates in system.
The indexes of this table are hwTlsCertificateType and hwTlsCertificateIndex.

hwTlsCertificateEntry row .1.3.6.1.4.1.2011.6.36.1.187.1

This table is used to config and query the certificates in system.
The indexes of this entry are hwTlsCertificateType and hwTlsCertificateIndex.

Indexes

hwTlsCertificateType hwTlsCertificateIndex

Column	Syntax	OID
hwTlsCertificateType Indicates the type of certificate. Options: 1. 0 -Root certificate 2. 1 -Certificate 3. 2 -Key	Integer32 Constraints: range: 0-2	.1.3.6.1.4.1.2011.6.36.1.187.1.1
hwTlsCertificateIndex Indicates the index of certificate.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.2011.6.36.1.187.1.2
hwTlsParaCertificateName Indicates the name of certificate.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.2011.6.36.1.187.1.3
hwTlsCertificateRowStatus This is used to create new rows in this table, modify existing rows, and delete existing rows.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.36.1.187.1.4

This table is used to config the fax parameter of a IP truck group.
The index of this table is hwIpTrkGrpFaxParaGrpName.

hwIpTrkGrpFaxParaEntry row .1.3.6.1.4.1.2011.6.36.1.188.1

This table is used to config the fax parameter of a IP truck group.
The index of this entry is hwIpTrkGrpFaxParaGrpName.

Indexes

hwIpTrkGrpFaxParaGrpName

Column	Syntax	OID
hwIpTrkGrpFaxParaGrpName Indicates the IP truck group name.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2011.6.36.1.188.1.1
hwIpTrkGrpFaxMode Indicates the fax transmission mode. 1-Transparent transmission; 2-Auto-negotiation T.38; 3-V3 flow; 4-Stand-alone transparent transmission; 5-V5 flow; 6-Self-switch T.38. To be compatible with the previous versions, th…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.188.1.2
hwIpTrkGrpFaxRedundancyFlag Use fax redundancy parameter or not .1:enable,to use. 2:disable,not to use. This leaf only valid in sip transparent fax.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.188.1.4
hwIpTrkGrpFaxNegoMode The negotiate mode of fax. Options: 1. negotiate(1) -negotiate 2. selfswitch(2) -do not negotiate	Enumerationr/w Enumerated Values: 1 negotiate 2 selfswitch	.1.3.6.1.4.1.2011.6.36.1.188.1.5
hwIpTrkGrpFaxTransMode Indicates the fax transmission mode. Options: 1. thoroughly(1) -use voice codec 2. t38(2) - use T.38 codec Default: thoroughly(1)	Enumerationr/w Enumerated Values: 1 thoroughly 2 t38	.1.3.6.1.4.1.2011.6.36.1.188.1.6
hwIpTrkGrpFaxParaVbdCodec Indicates the codec of VBD. Options: 1. g711A(1) -G.711A 2. g711U(2) -G.711U	Enumerationr/w Enumerated Values: 1 g711A 2 g711U	.1.3.6.1.4.1.2011.6.36.1.188.1.9
hwIpTrkGrpFaxParaVbdPtType Indicates the payload type of VBD. Options: 1. static(1) -static payload type 2. dynamic(2) -dynamic payload type	Enumerationr/w Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.2011.6.36.1.188.1.10
hwIpTrkGrpFaxVbdAttributeType Indicate the format of session attribute lines when starting fax VBD Negotiation. Options: 1. v152(1) -v.152 format 2. chinatelecom(2) -chinatelecom format 3. extchinatelecom(3) -extchinatelecom format 4. ietf(4) -ietf …	Enumerationr/w Enumerated Values: 1 v152 2 chinatelecom 3 extchinatelecom 4 ietf	.1.3.6.1.4.1.2011.6.36.1.188.1.12
hwIpTrkGrpFaxRtpInterval Indicates the default RTP packet time of DSP channel. Options: 1. packettime5ms(1) -5ms 2. packettime10ms(2) -10ms 3. packettime20ms(3) -20ms 4. packettime30ms(4) -30ms Unit: millisecond	Enumerationr/w Enumerated Values: 1 packettime5ms 2 packettime10ms 3 packettime20ms 4 packettime30ms	.1.3.6.1.4.1.2011.6.36.1.188.1.13

This table is used to config the modem parameter of a IP truck group.
The index of this table is hwIpTrkGrpModemParaGrpName.

hwIpTrkGrpModemParaEntry row .1.3.6.1.4.1.2011.6.36.1.189.1

This table is used to config the modem parameter of a IP truck group.
The index of this entry is hwIpTrkGrpModemParaGrpName.

Indexes

hwIpTrkGrpModemParaGrpName

Column	Syntax	OID
hwIpTrkGrpModemParaGrpName Indicates the IP truck group name.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2011.6.36.1.189.1.1
hwIpTrkGrpModemMode Indicates the modem transmission mode. 1-Negotiation mode; 2-Stand-alone mode.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.189.1.2
hwIpTrkGrpModemRedundancyFlag Indicates the flag of using the modem redundancy parameter. 1-enable; 2-disable .	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.189.1.3
hwIpTrkGrpModemNegoMode The negotiate mode of fax. Options: 1. negotiate(1) -negotiate 2. selfswitch(2) -do not negotiate	Enumerationr/w Enumerated Values: 1 negotiate 2 selfswitch	.1.3.6.1.4.1.2011.6.36.1.189.1.5
hwIpTrkGrpModemTransMode Indicates the fax transmission mode. Options: 1. thoroughly(1) -thoroughly transmission 2. relay(2) -Relay mode Default: thoroughly(1)	Enumerationr/w Enumerated Values: 1 thoroughly 2 relay	.1.3.6.1.4.1.2011.6.36.1.189.1.6
hwIpTrkGrpModemParaVbdCodec Indicates the codec of VBD. Options: 1. g711A(1) -G.711A 2. g711U(2) -G.711U	Enumerationr/w Enumerated Values: 1 g711A 2 g711U	.1.3.6.1.4.1.2011.6.36.1.189.1.9
hwIpTrkGrpModemParaVbdPtType Indicates the payload type of VBD. Options: 1. static(1) -static payload type 2. dynamic(2) -dynamic payload type	Enumerationr/w Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.2011.6.36.1.189.1.10
hwIpTrkGrpModemVbdAttributeType Indicate the format of session attribute lines when starting modem VBD Negotiation. Options: 1. v152(1) -V.152 2. chinatelecom(2) -china telecom 3. extchinatelecom(3) -extend china telecom 4. ietf(4) -ietf	Enumerationr/w Enumerated Values: 1 v152 2 chinatelecom 3 extchinatelecom 4 ietf	.1.3.6.1.4.1.2011.6.36.1.189.1.12
hwIpTrkGrpModemRtpInterval Indicates the default RTP packet time of DSP channel. Options: 1. packettime5ms(1) -5ms 2. packettime10ms(2) -10ms 3. packettime20ms(3) -20ms 4. packettime30ms(4) -30ms Unit: millisecond	Enumerationr/w Enumerated Values: 1 packettime5ms 2 packettime10ms 3 packettime20ms 4 packettime30ms	.1.3.6.1.4.1.2011.6.36.1.189.1.13

This table is used to config the rfc2833 parameter of a IP truck group.
The index of this table is hwIpTrkGrpRfc2833GrpName.

hwIpTrkGrpRfc2833Entry row .1.3.6.1.4.1.2011.6.36.1.190.1

This table is used to config the rfc2833 parameter of a IP truck group.
The index of this entry is hwIpTrkGrpRfc2833GrpName.

Indexes

hwIpTrkGrpRfc2833GrpName

Column	Syntax	OID
hwIpTrkGrpRfc2833GrpName Indicates the IP truck group name.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2011.6.36.1.190.1.1
hwIpTrkGrpRfc2833NegoMode Indicates the start mode of the rfc2833. Options: 1. negoStart(1) -negotiate start 2. fixedStart(2) -fixed start 3. noInitiativeStart(3) -no initiative start	Enumerationr/w Enumerated Values: 1 negoStart 2 fixedStart 3 noInitiativeStart	.1.3.6.1.4.1.2011.6.36.1.190.1.2
hwIpTrkGrpRfc2833FaxModem Indicates the flag of fax and modem event using rfc2833 parameter. Options: 1. enable(1) -enable 2. disable(2) -disable Default: enable(1)	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.36.1.190.1.3
hwIpTrkGrpRfc2833FlashHook Indicates the flag of flash hook event using rfc2833 parameter. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.36.1.190.1.4
hwIpTrkGrpRfc2833Dtmf Indicates the flag of dtmf using rfc2833 parameter. Options: 1. enable(1) -enable(1) 2. disable(2) -disable(2) Default: enable(1)	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.36.1.190.1.5

This table is used to config the rfc2198 parameter of a IP truck group.
The index of this table is hwIpTrkGrpRfc2198GrpName.

hwIpTrkGrpRfc2198Entry row .1.3.6.1.4.1.2011.6.36.1.191.1

This table is used to config the rfc2198 parameter of a IP truck group.
The index of this entry is hwIpTrkGrpRfc2198GrpName.

Indexes

hwIpTrkGrpRfc2198GrpName

Column	Syntax	OID
hwIpTrkGrpRfc2198GrpName Indicates the IP truck group name.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2011.6.36.1.191.1.1
hwIpTrkGrpRfc2198NegoMode Indicates the start mode of the rfc2198. Options: 1. negoStart(1) -negotiate start 2. fixedStart(2) -fixed start 3. noInitiativeStart(3) -no initiative start	Enumerationr/w Enumerated Values: 1 negoStart 2 fixedStart 3 noInitiativeStart	.1.3.6.1.4.1.2011.6.36.1.191.1.2
hwIpTrkGrpRfc2198StartMode Indicates the start mode of the rfc2198. Options: 1. smart2198(1) -smart start RFC2198 2. ordinary2198(2) -start RFC2198 ordinary	Enumerationr/w Enumerated Values: 1 smart2198 2 ordinary2198	.1.3.6.1.4.1.2011.6.36.1.191.1.3
hwIpTrkGrpRfc2198Rfc2833 Indicates the flag of rfc2833 with using rfc2198. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2)	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.36.1.191.1.4
hwIpTrkGrpRfc2198Vbd Indicates the flag of the VBD using rfc2198. Options: 1. enable(1) -enable 2. disable(2) -disable	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.36.1.191.1.5
hwIpTrkGrpRfc2198Voice Indicates the flag of voice using rfc2198. Options: 1. enable(1) -enable 2. disable(2) -disable	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.36.1.191.1.6

This table is used to config the dtmf parameter of a IP truck group.
The index of this table is hwIpTrkGrpDtmfGrpName.

hwIpTrkGrpDtmfParaEntry row .1.3.6.1.4.1.2011.6.36.1.192.1

This table is used to config the dtmf parameter of a IP truck group.
The index of this entry is hwIpTrkGrpDtmfGrpName.

Indexes

hwIpTrkGrpDtmfGrpName

Column	Syntax	OID
hwIpTrkGrpDtmfGrpName Indicates the IP truck group name.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2011.6.36.1.192.1.1
hwIpTrkGrpDtmfTransMode Indicates the transmission mode of DTMF. Options: 1. thoroughly(1) -transparent transmission 2. erase(2) -erase DTMF Default: thoroughly(1)	Enumerationr/w Enumerated Values: 1 thoroughly 2 erase	.1.3.6.1.4.1.2011.6.36.1.192.1.2

This table is used to config the DSP resource type.
The index of this table is hwDspResourceTypeIndex.

hwDspResourceTypeEntry row .1.3.6.1.4.1.2011.6.36.1.193.1

This table is used to config the DSP resource type.
The index of this entry is hwDspResourceTypeIndex.

Indexes

hwDspResourceTypeIndex

Column	Syntax	OID
hwDspResourceTypeIndex Bits 31-26 (six bits): shelf index Bits 25-20 (six bits): slot index Bits 19-16 (four bits): subboard index Bits 15-0 (16 bits): chip index	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.36.1.193.1.1
hwDspResourceTypeValue Indicates the type of resource type. Options: 1. default(1) - default resource 2. instant(2) - instant conference resource 3. reserved(3) - reserved conference resource	Enumerationr/w Enumerated Values: 1 default 2 instant 3 reserved	.1.3.6.1.4.1.2011.6.36.1.193.1.2

This table is used to config the digitmap group.
The index of this table is hwDigitMapGroupName.

hwDigitMapGroupConfigEntry row .1.3.6.1.4.1.2011.6.36.1.194.1

This table is used to config the digitmap group.
The index of this entry is hwDigitMapGroupName.

Indexes

hwDigitMapGroupName

Column	Syntax	OID
hwDigitMapGroupName Indicates the digitmap group name.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.2011.6.36.1.194.1.1
hwDigitMapGroupNewName Indicates the new name of digitmap group.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.2011.6.36.1.194.1.2
hwDigitMapGroupReferDigitMapNameList Indicates the digitmap name list in digitmap group.	OctetStringr/w Constraints: range: 1-264	.1.3.6.1.4.1.2011.6.36.1.194.1.3
hwDigitMapGroupRowStatus Indicates the row status of digitmap group.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.36.1.194.1.4

This table is used to config the default type for the common ring.
The index of this table is hwMgRingDefaultMgcParaMgId.

hwMgRingDefaultMgcParaEntry row .1.3.6.1.4.1.2011.6.36.1.196.1

This table is used to config the default type for the common ring.
The index of this entry is hwMgRingDefaultMgcParaMgId.

Indexes

hwMgRingDefaultMgcParaMgId

Column	Syntax	OID
hwMgRingDefaultMgcParaMgId Indicates the MG ID.	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2011.6.36.1.196.1.1
hwMgRingDefaultMgcparaForRing Indicates default peer para of the ring. Options: 255. Indicates resume system default config.	Integer32r/w Constraints: range: 0-15 range: 255-255	.1.3.6.1.4.1.2011.6.36.1.196.1.2
hwMgRingDefaultMgcparaForMwi Indicates default peer para of the mwi ring. Options: 255. Indicates resume system default config.	Integer32r/w Constraints: range: 0-15 range: 255-255	.1.3.6.1.4.1.2011.6.36.1.196.1.3

This table is used to set the tls attribute.
The index of this table is hwIpTrkGrpTlsParaGrpName.

hwIpTrkGrpTlsParaCfgEntry row .1.3.6.1.4.1.2011.6.36.1.197.1

This table is used to set the tls attribute.
The index of this entry is hwIpTrkGrpTlsParaGrpName.

Indexes

hwIpTrkGrpTlsParaGrpName

Column	Syntax	OID
hwIpTrkGrpTlsParaGrpName Indicates the IP truck group name.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2011.6.36.1.197.1.1
hwIpTrkGrpTlsParaTlsVersion Indicates the version of TLS. Options: 1. tlsv10(1) -TLS v1.0 2. tlsv11(2) -TLS v1.1 3. auto-negotiate(3) -auto negotiate Default: auto-negotiate(3)	Enumerationr/w Enumerated Values: 1 tlsv10 2 tlsv11 3 auto-negotiate	.1.3.6.1.4.1.2011.6.36.1.197.1.2
hwIpTrkGrpTlsParaAuthMode Indicates the authentication mode of TLS. Options: 1. anonymous(1) -Anonymous 2. server(2) -Server 3. client(3) -Client 4. both(4) -Both Default: anonymous(1)	Enumerationr/w Enumerated Values: 1 anonymous 2 server 3 client 4 both	.1.3.6.1.4.1.2011.6.36.1.197.1.3
hwIpTrkGrpTlsParaRootCA Indicates the name of root certificate.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2011.6.36.1.197.1.4
hwIpTrkGrpTlsParaCert Indicates the name of certificate.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2011.6.36.1.197.1.5
hwIpTrkGrpTlsParaKey Indicates the name of key.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2011.6.36.1.197.1.6

This table is used to set the default short ring type and AOCE ring type.
The index of this table is hwMgRingDefaultRingparaMgId.

hwMgRingDefaultRingParaEntry row .1.3.6.1.4.1.2011.6.36.1.198.1

This table is used to set the default short ring type and AOCE ring type.
The index of this entry is hwMgRingDefaultRingparaMgId.

Indexes

hwMgRingDefaultRingparaMgId

Column	Syntax	OID
hwMgRingDefaultRingparaMgId Indicates the MG ID.	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2011.6.36.1.198.1.1
hwMgShortRingType Indicates the short ring type. Enumerated types: 1-Null, 2-Normal ring 1:4, 3-Special ring 1:2, 4-Special ring 0.4:0.2:0.4:4, 5-Long ring, 6-Special ring 1.2:2, 7-HK ring 1:3, 8-HK CNTRX 0.4:0.2:0.4:0.2:0.4:3.0, 9-HK …	Integer32r/w Constraints: range: 1-58	.1.3.6.1.4.1.2011.6.36.1.198.1.2
hwMgAOCERingType Indicates the AOCE ring type. Enumeration type: 1-Null, 2-Normal ring (FSK) 1:4, 3-Special ring (FSK) 1:2, 4-Special ring (FSK) 0.4:0.2:0.4:4, 5-Special ring (FSK) 1.2:2, 6-HK ring (FSK) 1:3, 7-HK CNTRX (FSK) 0.4:0.2:0…	Integer32r/w Constraints: range: 1-28	.1.3.6.1.4.1.2011.6.36.1.198.1.3

This table is used to set the scheme od number change.
The index of this table is hwVGWNumberChangeName.

hwVGWNumberChangeEntry row .1.3.6.1.4.1.2011.6.36.1.199.1

This table is used to set the scheme od number change.
The index of this entry is hwVGWNumberChangeName.

Indexes

hwVGWNumberChangeName

Column	Syntax	OID
hwVGWNumberChangeName Indicates the name of number change.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.2011.6.36.1.199.1.1
hwVGWNumberChangeType Indicates the change type of number change. Options: 1. insert(1) - insert new number operation 2. replace(2) - replace number operation 3. delete(3) - delete number operation 4. translation-rule-set(4) - translation ru…	Enumerationr/w Enumerated Values: 1 insert 2 replace 3 delete 4 translation-rule-set	.1.3.6.1.4.1.2011.6.36.1.199.1.2
hwVGWNumberChangeStartPos Indicates the change start position of source number.	Integer32r/w Constraints: range: 1-64 range: 255-255	.1.3.6.1.4.1.2011.6.36.1.199.1.3
hwVGWNumberChangeNewNumber Indicates the modify number of number change.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.2011.6.36.1.199.1.4
hwVGWNumberChangeChangeLen Indicates the modify length of number change,255 means to set this value invalid.	Integer32r/w Constraints: range: 1-64 range: 255-255	.1.3.6.1.4.1.2011.6.36.1.199.1.5
hwVGWNumberChangeRowStatus Indicates the row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.36.1.199.1.6
hwVGWNumberChangeTranslationRuleSetName Indicates the translation rule set name of number change.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.2011.6.36.1.199.1.7

This table is used to set the translation rule.
The index of this table is hwTranslationRuleName.

hwTranslationRuleConfigEntry row .1.3.6.1.4.1.2011.6.36.1.201.1

This table is used to set the translation rule.
The index of this entry is hwTranslationRuleName.

Indexes

hwTranslationRuleName

Column	Syntax	OID
hwTranslationRuleName Indicates the name of translation rule.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.2011.6.36.1.201.1.1
hwTranslationRuleMatchPattern Indicates the match pattern of translation rule.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.2011.6.36.1.201.1.2
hwTranslationRuleReplacePattern Indicates the replace pattern of translation rule.	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.2011.6.36.1.201.1.3
hwTranslationRuleRowStatus Indicates the row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.36.1.201.1.4