HUAWEI-VLAN-MIB Table View

Describes the VLAN basic attributes, used for managing a VLAN, including creating,
modifying, querying, and deleting a VLAN, and configuring standard ports of a VLAN.
The index of this table is hwVlanIndex.

hwVlanMIBEntry row .1.3.6.1.4.1.2011.5.6.1.1.1

Describes the VLAN basic attributes, used for managing a VLAN, including creating,
modifying, querying, and deleting a VLAN, and configuring standard ports of a VLAN.
The index of this entry is hwVlanIndex.

Indexes

hwVlanIndex

Column	Syntax	OID
hwVlanIndex Indicates the VLAN ID. Range: 1-36863. VLAN 1 is the native VLAN. It cannot be deleted, but its attributes can be modified.	VlanIndex	.1.3.6.1.4.1.2011.5.6.1.1.1.1
hwVlanName Indicates the VLAN tag. Identifying the VLAN is like naming the VLAN, which facilitates management. Range: a string of 0-32 characters Default: null character string	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.6.1.1.1.2
hwVlanPorts Indicates the list of the standard ports in the VLAN. If the VLAN contains a port, the corresponding bit of the port is set to 1. The value of hwVlanPorts is an octet string. One bit in each octet indicates one port, so…	PortListr/w	.1.3.6.1.4.1.2011.5.6.1.1.1.3
hwVlanType Indicates the VLAN type. Options: 1. superVlan(1) -indicates super VLAN. 2. commonVlan(2) -indicates common VLAN. 3. subVlan(3) -indicates sub VLAN, the value is not supported. 4. primaryVlan(4) -indi…	Enumerationr/w Enumerated Values: 1 superVlan 2 commonVlan 3 subVlan 4 primaryVlan 5 secondaryVlan 6 regionVlan 7 smartVlan 8 muxVlan 9 multiVlan	.1.3.6.1.4.1.2011.5.6.1.1.1.4
hwVlanMacFilter The flag indicates whether to use mac filter. 1. true(1): use mac filter 2. false(2): not use mac filter	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.6.1.1.1.5
hwVlanMcastUnknownProtos multicast unknown protocals flag in the VLAN field	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.6.1.1.1.6
hwExistInterface The virtual interface used by VLAN	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.6.1.1.1.7
hwVlanInterfaceIndex The index of the VLAN interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.6.1.1.1.8
hwVlanMacLearn The flag indicates whether to open mac learning.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.6.1.1.1.9
hwVlanStatus Status of VLAN. Options: 1. other(1) -The following enumerated values is not supported. 2. permanent(2) -The following enumerated values is not supported. 3. dynamicGvrp(3) -The following enumerated values is no…	Enumeration Enumerated Values: 1 other 2 permanent 3 dynamicGvrp	.1.3.6.1.4.1.2011.5.6.1.1.1.10
hwVlanCreationTime The time of creating VLAN.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.6.1.1.1.11
hwVlanPriority Indicates the 802.1p priority of a VLAN. Range: 0-7, 255 The larger the value, the higher the priority. If the query operation is performed before hwVlanPriority is configured, the query result is 255, which is invalid.…	Integer32r/w Constraints: range: 255-255 range: 0-7	.1.3.6.1.4.1.2011.5.6.1.1.1.12
hwVlanRowStatus Indicates the row status, used for creating or deleting a VLAN. Options: 1. active(1) 2. createAndGo(4) 3. destroy(6) To create a VLAN, you must specify hwVlanType and set hwVlanRowStatus to createAndGo(4) to perform th…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.6.1.1.1.13
hwVlanAttrib Indicates the VLAN attribute. The following enumerated values are supported: Options: 1. common(1) -indicates common VLAN. 2. qinq(2) -indicates QinQ VLAN. 3. stacking(3) -indicates stacking VLAN. 4. subVlan(4)…	Enumerationr/w Enumerated Values: 1 common 2 qinq 3 stacking 4 subVlan	.1.3.6.1.4.1.2011.5.6.1.1.1.14
hwVlanSuperID Indicates the ID of the super VLAN corresponding to the sub VLAN. Range: -1, 2-4093 This leaf is read-only. When the VLAN is not a sub VLAN, -1 is returned.	Integer32 Constraints: range: 2-4093 range: -1--1	.1.3.6.1.4.1.2011.5.6.1.1.1.15
hwVlanForwarding Indicates the VLAN forwarding policy. Options: 1. vlanMac(1) -indicates forwarding based on the VLAN+MAC. 2. vlanConnect(2) -indicates forwarding based on the SVLAN+CVLAN. During the creation of a VLA…	Enumerationr/w Enumerated Values: 1 vlanMac 2 vlanConnect	.1.3.6.1.4.1.2011.5.6.1.1.1.16
hwVlanPolicyBroadcast Indicates the VLAN-based forwarding policy for the broadcast packets. Options: 1. forward(1) -indicates that the broadcast packets are transparently transmitted. 2. discard(2) -indicates that the broadcast packets are d…	Enumerationr/w Enumerated Values: 1 forward 2 discard	.1.3.6.1.4.1.2011.5.6.1.1.1.17
hwVlanPolicyMulticast Indicates the VLAN-based forwarding policy for the unknown multicast packets. Options: 1. forward(1) -indicates that the unknown multicast packets are transparently transmitted. 2. discard(2) -indicates that the unknown…	Enumerationr/w Enumerated Values: 1 forward 2 discard	.1.3.6.1.4.1.2011.5.6.1.1.1.18
hwVlanPolicyUnknowncast Indicates the VLAN-based forwarding policy for the unknown unicast packets. Options: 1. forward(1) -indicates that the unknown unicast packets are transparently transmitted. 2. discard(2) -indicates that the unknown uni…	Enumerationr/w Enumerated Values: 1 forward 2 discard	.1.3.6.1.4.1.2011.5.6.1.1.1.19
hwVlanOuterTpid Indicates the Ethernet protocol type of a VLAN. Range: 1536-65535 (0x0600-0xFFFF) Default: 0x8100	Unsigned32r/w Constraints: range: 1536-65535	.1.3.6.1.4.1.2011.5.6.1.1.1.20
hwVlanBindSrvProfName Indicates the name of the VLAN service profile bound to a VLAN. Range: a string of 0-32 characters This leaf identifies a VLAN service profile, which must be created in hwVlanSrvProfTable. The null character string indi…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.6.1.1.1.21
hwVlanChangeEnable Indicates the operation type of whether a standard port list maps a VLAN. Options: 1. idle(0) -indicates invalid mapping. 2. addPort(1) -indicates that a port is added to the VLAN. 3. removePort(2) -indicates t…	Enumerationr/w Enumerated Values: 0 idle 1 addPort 2 removePort	.1.3.6.1.4.1.2011.5.6.1.1.1.22
hwVlanBindRaioProfileName Indicates the name of the RAIO profile bound to a VLAN. Range: a string of 0-32 characters This leaf identifies a RAIO profile, which must be created in hwDslamRAIOProfileTable. The null character string indicates that …	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.6.1.1.1.23
hwVlanTrafficSuppressUnknowncastNetwork Indicates the unknown unicast traffic suppression on a VLAN. Range: 0-13 Default: 0 13 indicates full-suppression of traffic, and 0 indicates no traffic suppression. The suppression levels and corresponding bandwidth ra…	Integer32r/w Constraints: range: 0-13	.1.3.6.1.4.1.2011.5.6.1.1.1.24
hwVlanMethL2Forward Indicates the switch of MEth l2 forwarding on a VLAN. Options: 1. enable(1) -Enable MEth l2 forwarding on a VLAN. 2. disable(2) -Disable MEth l2 forwarding on a VLAN. The default value is disable(2).	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.6.1.1.1.25
hwVlanPortsExtendFrame Indicates the list of the extend frame standard ports in the VLAN. If the VLAN contains a port, the corresponding bit of the port is set to 1. The value of hwVlanPortsExtendFrame is mixed encoding of the index and oc…	OctetStringr/w Constraints: range: 0-2048	.1.3.6.1.4.1.2011.5.6.1.1.1.26

Describes VLAN interface management, including IP address
management, enabling and disabling of the DHCP client, and
DHCP client option 60.
The index of this table is hwVlanInterfaceID.

hwVlanInterfaceEntry row .1.3.6.1.4.1.2011.5.6.1.2.1

Describes VLAN interface management, including IP address
management, enabling and disabling of the DHCP client, and
DHCP client option 60.
The index of this entry is hwVlanInterfaceID.

Indexes

hwVlanInterfaceID

Column	Syntax	OID
hwVlanInterfaceID Indicates the index of a VLAN interface, which maps a VLAN ID. For example, the index of VLAN interface 3 is 3.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.6.1.2.1.1
hwVlanID Indicates the corresponding VLAN ID of a VLAN interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.6.1.2.1.2
hwVlanIpAddress Indicates the IP address of a VLAN interface. Default: 0.0.0.0.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.6.1.2.1.3
hwVlanIpAddressMask Indicates the IP address subnet mask.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.6.1.2.1.4
hwVlanInterfaceAdminStatus Indicates the management status of a VLAN interface. Options: 1. up(1) -indicates up status. 2. down(2) -indicates down status. Default: up(1)	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2011.5.6.1.2.1.5
hwVlanInterfaceFrameType Indicates the type of the frame that can be received by a VLAN interface. Options: 1. ethernetii(1) -For the frame format of ethernetii(1), see RFC894. 2. ethernetsnap(2) -The value is not supported. 3. ethernet8022…	Enumerationr/w Enumerated Values: 1 ethernetii 2 ethernetsnap 3 ethernet8022 4 ethernet8023	.1.3.6.1.4.1.2011.5.6.1.2.1.6
hwInterfaceRowStatus Indicates the row status. It is used for create, delete and modify operations. Options: 1. createAndGo(4) 2. destroy(6) 3. active(1)	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.6.1.2.1.7
hwVlanInterfaceLinkStatus Indicates the protocol status of a link that is contained in a VLAN interface. Options: 1. up(1) -The protocol status of a link that is contained in a VLAN interface is up. 2. down(2) -The protocol status of a lin…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2011.5.6.1.2.1.8
hwVlanIfIPMode Indicates the mode of obtaining an IP address. Options: 1. static(1) -Configured statically. 2. dhcp(2) -Obtained through DHCP.	Enumerationr/w Enumerated Values: 1 static 2 dhcp	.1.3.6.1.4.1.2011.5.6.1.2.1.9
hwVlanIfDhcpClientOption60 Indicates the option 60 information carried in DHCP packets that are sent by a L3 interface when obtaining an IP address in the DHCP mode. Range: 0-32 characters	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.6.1.2.1.10
hwVlanIfVlanEncapMode Used to configure the VLAN encapsulation mode of a VLAN interface. Options: 1. singleTag(1) -Single tag VLAN encapsulation mode. 2. doubleTag(2) -Double tag VLAN encapsulation mode. Default: singleTag(1)	Enumerationr/w Enumerated Values: 1 singleTag 2 doubleTag	.1.3.6.1.4.1.2011.5.6.1.2.1.11
hwVlanIfVlanInnerLabel Used to configure the inner VLAN ID when the VLAN encapsulation mode of a VLAN interface is double-tag mode. Range: 1-4095 Default: 1	Integer32r/w Constraints: range: 1-4095	.1.3.6.1.4.1.2011.5.6.1.2.1.12
hwVlanIfDhcpsStatus Describes the mode of dhcp server on this interface. Options: 1. disable(1) -disable dhcp server. 2. enable(2) -enable dhcp server. Default: disable(1)	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.5.6.1.2.1.13
hwIPv6MTU Used to configure the maximum transmission unit of vlanif.If you set it on one vlanif,all the vlanif will be configured. For P300 device, the node can take effect on IPV4 and IPV6. For Saturn device, it only takes effe…	Integer32r/w Constraints: range: 1501-9600 range: 1280-1499 range: -1--1	.1.3.6.1.4.1.2011.5.6.1.2.1.14
hwIPv4MTU Used to configure the maximum transmission unit of vlanif. The node is only supported on Saturn device. It only takes effect on IPV4. Range: -1,1501-9600 Deafult:-1,this value means the MTU of vlanif is the default va…	Integer32r/w Constraints: range: 1501-9600 range: -1--1	.1.3.6.1.4.1.2011.5.6.1.2.1.15
hwVlanIfDhcpsLeaseMode Indicates that the lease mode. Options: 1. delete(0) -Set zero to delete the current lease configuration. 2. limited(1) -The lease mode is limited. 3. unlimited(2) -The lease mode is unlimited. Default: limited(…	Enumerationr/w Enumerated Values: 0 delete 1 limited 2 unlimited	.1.3.6.1.4.1.2011.5.6.1.2.1.16
hwVlanIfDhcpsLeaseDay Used to configure the day number of leasing dhcp server time. Range: -1, 0-999. Deafult:-1, this value means the lease mode is unlimited or dhcp server is unset.	Integer32r/w Constraints: range: -1-999	.1.3.6.1.4.1.2011.5.6.1.2.1.17
hwVlanIfDhcpsLeaseHour Used to configure the hour number of leasing dhcp server time. Range: -1, 0-23. Deafult:-1, this value means the lease mode is unlimited or dhcp server is unset.	Integer32r/w Constraints: range: -1-23	.1.3.6.1.4.1.2011.5.6.1.2.1.18
hwVlanIfDhcpsLeaseMinute Used to configure the minute number of leasing dhcp server time. Range: -1, 0-59. Deafult:-1, this value means the lease mode is unlimited or dhcp server is unset.	Integer32r/w Constraints: range: -1-59	.1.3.6.1.4.1.2011.5.6.1.2.1.19
hwVlanIfDhcpsStartIpAddr Indicates the start address of the ip range. Default: 0.0.0.0. When you set 0.0.0.0, it means to delete the configuration of ip-range. However, you need to set 0.0.0.0 for endIpAddr simultaneously to delete ip-range.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.6.1.2.1.20
hwVlanIfDhcpsEndIpAddr Indicates the end address of the ip range. Default: 0.0.0.0. When you set 0.0.0.0, it means to delete the configuration of ip-range. However, you need to set 0.0.0.0 for startIpAddr simultaneously to delete ip-range.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.6.1.2.1.21
hwVlanIfDhcpsMask Indicates the mask of the dhcp server. Default: 0.0.0.0. Please set 0.0.0.0 to delete current mask.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.6.1.2.1.22
hwVlanIfDhcpsGateway String of gateway ip addresses for DHCP server. Since mostly 8 ip addresses can be configured for a pool totally, a string is defined to get or configure 8 ip addresses at a time. Please use ',' to separate them.	OctetStringr/w Constraints: range: 0-129	.1.3.6.1.4.1.2011.5.6.1.2.1.23
hwVlanIfDhcpsGatewayUndo A gateway ip address to be deleted. This object is only for deleting a given ip address of gateway-list.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.2011.5.6.1.2.1.24
hwVlanIfDhcpsOption Indicates the option operation of DHCP server. Default: config(1).	Enumerationr/w Enumerated Values: 1 config 2 delete	.1.3.6.1.4.1.2011.5.6.1.2.1.25
hwVlanIfDhcpsOptCode Indicates the option code of DHCP server. Default: 0. This means option is unset.	Integer32r/w Constraints: range: 0-254	.1.3.6.1.4.1.2011.5.6.1.2.1.26
hwVlanIfDhcpsSubOptCode Indicates the sub-option code of DHCP server. Setting the node, this node must match with hwVlanIfDhcpsOptType. When the value is 0, it means setting option. When the value is not 0, it means setting sub-option. The ru…	Integer32r/w Constraints: range: 0-254	.1.3.6.1.4.1.2011.5.6.1.2.1.27
hwVlanIfDhcpsOptType Indicates the option type of DHCP server option. The type you choose must match the sub-option code. Types: 1. unset(0) 2. ascii(1) 3. hex(2) 4. cipher(3) 5. ipAddress(4)	Enumerationr/w Enumerated Values: 0 unset 1 ascii 2 hex 3 cipher 4 ipAddress	.1.3.6.1.4.1.2011.5.6.1.2.1.28
hwVlanIfDhcpsOptStr This node is an IP string of dhcp server option. The string you input must match the type that you choose in hwVlanIfDhcpsOptType.	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.2011.5.6.1.2.1.29
hwVlanIfDhcpsDns String of dns server ip addresses for DHCP clients. Since mostly 8 ip can be configured for a pool totally, a string is defined to get or configure 8 ip addresses at a time. Please use ',' to separate them.	OctetStringr/w Constraints: range: 0-129	.1.3.6.1.4.1.2011.5.6.1.2.1.30
hwVlanIfDhcpsDnsUndo A dns server ip address to be deleted. This object is only for deleting a given ip address of dns-list.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.2011.5.6.1.2.1.31

Indicates the super VLAN list, shows the sub VLANs in the super VLAN.
The index of this table is hwifSvlanVlanID.

hwifSVLANVlanListEntry row .1.3.6.1.4.1.2011.5.6.1.3.1

Indicates the super VLAN list, shows the sub VLANs in the super VLAN.
The index of this entry is hwifSvlanVlanID.

Indexes

hwifSvlanVlanID

Column	Syntax	OID
hwifSvlanVlanID The index of the table, indicates the super VLAN ID	VlanIndex	.1.3.6.1.4.1.2011.5.6.1.3.1.1
hwifSvlanSubVlanlistLow The low oct string for sub VLAN list of Primary VLANs, Each bit is one VLAN. All bits be 2048(256 * 8) VLAN. Sub VLAN will be added to super VLAN.	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.2011.5.6.1.3.1.2
hwifSvlanSubVlanlisHigh The high oct string for sub VLAN list of Primary VLANs, Each bit is one VLAN. All bits be 2048(256 * 8) VLAN Sub VLAN will be added to super VLAN.	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.2011.5.6.1.3.1.3
hwifSvlanOperStatus VLAN operational status, now support createAndGo(4),destroy(6)	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.6.1.3.1.4

Secondary VLAN lists of Primary VLANs.
The index of this table is hwifPvlanPrimaryVlanID.

hwifPVLANMappingEntry row .1.3.6.1.4.1.2011.5.6.1.4.1

Secondary VLAN lists of Primary VLANs.
The index of this entry is hwifPvlanPrimaryVlanID.

Indexes

hwifPvlanPrimaryVlanID

Column	Syntax	OID
hwifPvlanPrimaryVlanID Primary VLAN ID	VlanIndex	.1.3.6.1.4.1.2011.5.6.1.4.1.1
hwifPvlanSecondaryVlanlistLow The second low oct string for sub VLAN list of Primary VLANs, Each bit is one VLAN. All bits be 2048(256 * 8) VLAN Secondary VLAN will be added to primary VLAN.	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.2011.5.6.1.4.1.2
hwifPvlanSecondaryVlanlistHigh The second low oct string for sub VLAN list of Primary VLANs, Each bit is one VLAN. All bits be 2048(256 * 8) VLAN Secondary VLAN will be added to primary VLAN.	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.2011.5.6.1.4.1.3
hwifPvlanOperStatus vlan operational status, now support createAndGo(4),destroy(6)	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.6.1.4.1.4

Indicates the region VLAN, it is used to configure the region VLAN.
The index of this table is hwVlanIndex.

hwRegionVLanEntry row .1.3.6.1.4.1.2011.5.6.1.5.1

Indicates the region VLAN, it is used to configure the region VLAN.
The index of this entry is hwVlanIndex.

Indexes

hwVlanIndex

Column	Syntax	OID
hwRegionVpi THE atm vpi of the VLAN.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.6.1.5.1.1
hwRegionVci The atm vci of the VLAN.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.6.1.5.1.2
hwRegionPVCRowStatus Row status,now support createAndGo(4),destroy(6). 4 is used for creating group pvc for region VLAN, 6 is used for deleting group pvc for region VLAN.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.6.1.5.1.3

Indicates the smart VLAN, it is used to configure the smart VLAN.
The index of this table is hwSmartVlanID.

hwSmartVLanEntry row .1.3.6.1.4.1.2011.5.6.1.6.1

Indicates the smart VLAN, it is used to configure the smart VLAN.
The index of this entry is hwSmartVlanID.

Indexes

hwSmartVlanID

Column	Syntax	OID
hwSmartVlanID The index of the table, indicates a smart VLAN ID.	VlanIndex	.1.3.6.1.4.1.2011.5.6.1.6.1.1
hwSmartVlanUplinkPort smart VLAN uplink ports	PortListr/w	.1.3.6.1.4.1.2011.5.6.1.6.1.2
hwSmartVlanDownlinkPort smart VLAN downlink ports	PortListr/w	.1.3.6.1.4.1.2011.5.6.1.6.1.3
hwSmartVlanRowStatus Row status, now support createAndGo(4),destroy(6)	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.6.1.6.1.4

Indicates the Mux VLAN port configuration, it is used to configure the Mux VLAN port.
The index of this table is ifIndex.

hwMuxVlanPortConfEntry row .1.3.6.1.4.1.2011.5.6.1.8.1

Indicates the Mux VLAN port configuration, it is used to configure the Mux VLAN port.
The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwMuxVlanPortType Configure the uplink-port or cascading-port for the MUX VLAN. Options: 1. uplinkPort(1) -uplink port 2. cascadingPort(2) -cascading port	Enumerationr/w Enumerated Values: 1 uplinkPort 2 cascadingPort	.1.3.6.1.4.1.2011.5.6.1.8.1.1
hwMuxVlanStartVlanId The start VLAN ID of Mux VLAN.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.6.1.8.1.2
hwMuxVlanGroupNum The VLAN group number.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.6.1.8.1.3
hwMuxVlanPortConfRowStatus Row status, now support createAndGo(4),destroy(6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.6.1.8.1.4
hwMuxVlanUplinkPort Uplink port for mux VLAN configuration.(for UA 5000)	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.6.1.8.1.5
hwMuxVlanDownlinkPort Downlink port for mux VLAN configuration. If the value is -1, use inner port instead(Only used for UA5000).	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.6.1.8.1.6

Indicates the I/O board MUX VLAN configure, it is used to configure the I/O board MUX VLAN.
The index of this table is hwSlotIndex.

hwMuxVlanSlotConfEntry row .1.3.6.1.4.1.2011.5.6.1.9.1

Indicates the I/O board MUX VLAN configure, it is used to configure the I/O board MUX VLAN.
The index of this entry is hwSlotIndex.

Indexes

HUAWEI-DEVICE-MIBhwSlotIndex

Column	Syntax	OID
hwMuxVlanSlotStartVlanId The start VLAN ID for the I/O board.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.6.1.9.1.1
hwMuxVlanSlotRowStatus Row status, now support createAndGo(4),destroy(6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.6.1.9.1.2

Indicates the Multi VLAN, it is used to configure the multi VLAN.
The index of this table is hwMultiVlanID.

hwMultiVLanEntry row .1.3.6.1.4.1.2011.5.6.1.10.1

Indicates the Multi VLAN, it is used to configure the multi VLAN.
The index of this entry is hwMultiVlanID.

Indexes

hwMultiVlanID

Column	Syntax	OID
hwMultiVlanID The index of the table, indicates a Multi VLAN ID.	VlanIndex	.1.3.6.1.4.1.2011.5.6.1.10.1.1
hwMultiVlanUplinkPort Multi VLAN uplink ports.	PortListr/w	.1.3.6.1.4.1.2011.5.6.1.10.1.2
hwMultiVlanDownlinkPort Multi VLAN downlink ports.	PortListr/w	.1.3.6.1.4.1.2011.5.6.1.10.1.3
hwMultiVlanRowStatus Row status, now support createAndGo(4),destroy(6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.6.1.10.1.4

Describes the relation between the super VLAN and the sub VLAN in a VLAN aggregation.
The indexes of this table are hwVlanAggregationSuperVlanId and hwVlanAggregationSubVlanId.

hwVlanAggregationEntry row .1.3.6.1.4.1.2011.5.6.1.11.1

Describes the relation between the super VLAN and the sub VLAN in a VLAN aggregation.
The indexes of this entry are hwVlanAggregationSuperVlanId and hwVlanAggregationSubVlanId.

Indexes

hwVlanAggregationSuperVlanId hwVlanAggregationSubVlanId

Column	Syntax	OID
hwVlanAggregationSuperVlanId Indicates the super VLAN ID in a VLAN aggregation. Range: 2-36863	Integer32 Constraints: range: 2-36863	.1.3.6.1.4.1.2011.5.6.1.11.1.1
hwVlanAggregationSubVlanId Indicates the sub VLAN ID in a VLAN aggregation. Range: 2-36863	Integer32 Constraints: range: 2-36863	.1.3.6.1.4.1.2011.5.6.1.11.1.2
hwVlanAggregationSubVlanArpProxyStatus Indicates the status of ARP proxy in a sub VLAN. Options: 1. enabled(1) -Enable ARP proxy in a sub VLAN. 2. disabled(2) -Disable ARP proxy in a sub VLAN. Default: disabled(2)	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.6.1.11.1.3
hwVlanAggregationRowStatus Indicates the row status, used for creating or deleting a VLAN aggregation. Options: 1. active(1) 2. createAndGo(4) 3. destroy(6) To create a VLAN aggregation, specify the indexes, and set hwVlanAggregationRowStatus to …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.6.1.11.1.4
hwVlanAggregationSubVlanNdProxyStatus Indicates the status of ND proxy in a sub VLAN. Options: 1. enabled(1) -Enable ND proxy in a sub VLAN. 2. disabled(2) -Disable ND proxy in a sub VLAN. Default: disabled(2)	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.6.1.11.1.5

Describes the VLAN-based traffic statistics, including the numbers of the upstream bytes,
downstream bytes, upstream packets, downstream packets, upstream and downstream packets
in the ACL-based traffic statistics collection, discarded upstream packets, and discarded
downstream packets.
The indexes of this table are hwVlanIndex (outer VLAN ID) and hwInnerVlanID (inner VLAN ID).
hwVlanIndex references the leaf in hwVlanMIBTable.
If hwInnerVlanID is -1, that means the InnerVLAN-based traffic statistics is not supported.
If hwVlanTrafficOccupiedTable is being used to query the traffic and bandwidth occupancy of
a VLAN, querying hwVlanFlowAccountTable fails.

hwVlanFlowAccountEntry row .1.3.6.1.4.1.2011.5.6.1.14.1

Describes the VLAN-based traffic statistics, including the numbers of the upstream bytes,
downstream bytes, upstream packets, downstream packets, upstream and downstream packets
in the ACL-based traffic statistics colle…

Indexes

hwVlanIndex hwInnerVlanID

Column	Syntax	OID
hwInnerVlanID Indicates the inner VLAN tag in a stacking VLAN. If the VLAN is not of the stacking attribute or you perform the query operation only by the outer VLAN, this leaf must be set to -1. Currently, ACL-based VLAN traffic sta…	Integer32 Constraints: range: -1-4095	.1.3.6.1.4.1.2011.5.6.1.14.1.1
hwUpFlowAccountByte Indicates the number of upstream bytes of a VLAN. '18446744073709551615' means invalid value.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.6.1.14.1.2
hwDownFlowAccountByte Indicates the number of downstream bytes of a VLAN. '18446744073709551615' means invalid value.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.6.1.14.1.3
hwUpFlowAccountPacket Indicates the number of upstream packets of a VLAN. '18446744073709551615' means invalid value.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.6.1.14.1.4
hwDownFlowAccountPacket Indicates the number of downstream packets of a VLAN. '18446744073709551615' means invalid value.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.6.1.14.1.5
hwUpStreamPacket Indicates the number of upstream packets in the ACL-based VLAN traffic statistics collection. After the first query, 0 is fixedly returned. After the second query, traffic statistics of the VLAN between the two queries …	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.6.1.14.1.6
hwDownStreamPacket Indicates the number of downstream packets in the ACL-based VLAN traffic statistics collection. After the first query, 0 is fixedly returned. After the second query, traffic statistics of the VLAN between the two querie…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.6.1.14.1.7
hwFlowAccountAdminStatus Used to delete the VLAN traffic statistics. Options: 1. invalid(-1) -During the query, the invalid value -1 is fixedly returned. 2. reset(0) -indicates that the VLAN traffic statistics based on service board are dele…	Enumerationr/w Enumerated Values: -1 invalid 0 reset 1 resetAcl	.1.3.6.1.4.1.2011.5.6.1.14.1.8
hwUpFlowAccountDiscardPacket Indicates the number of upstream discarded packets of a VLAN. '18446744073709551615' means invalid value.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.6.1.14.1.9
hwDownFlowAccountDiscardPacket Indicates the number of downstream discarded packets of a VLAN. '18446744073709551615' means invalid value.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.6.1.14.1.10

Indicates the VLAN up direct CAR.
The index of this table is hwVlanUpCarId.

hwVlanUpCarEntry row .1.3.6.1.4.1.2011.5.6.1.15.1

Indicates the VLAN up direct CAR.
The index of this entry is hwVlanUpCarId.

Indexes

hwVlanUpCarId

Column	Syntax	OID
hwVlanUpCarId The index of the table, indicates a up direct Carid.	Integer32 Constraints: range: 1-4000	.1.3.6.1.4.1.2011.5.6.1.15.1.1
hwVlanUpCarName Up direct car name.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.6.1.15.1.2
hwVlanUpCarBandValue Car band value,The car value is multiple of 64kbps. Unit :kbps	Integer32r/w Constraints: range: 64-1048512	.1.3.6.1.4.1.2011.5.6.1.15.1.3
hwVlanUpCarBurstValue Car burst value. Unit:kbps	Integer32r/w Constraints: range: 2-8192	.1.3.6.1.4.1.2011.5.6.1.15.1.4
hwVlanUpCarIsUsed The flag indicates whether the carid is used. Options: 1. used(1) -The carid is used. 2. noUsed(2) -The carid is no-used.	Enumeration Enumerated Values: 1 used 2 noUsed	.1.3.6.1.4.1.2011.5.6.1.15.1.5
hwVlanUpCarRowStatus Row status, now support createAndGo(4),destroy(6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.6.1.15.1.6

Indicates the VLAN down direct CAR.
The index of this table is hwVlanDownCarId.

hwVlanDownCarEntry row .1.3.6.1.4.1.2011.5.6.1.16.1

Indicates the VLAN down direct CAR.
The index of this entry is hwVlanDownCarId.

Indexes

hwVlanDownCarId

Column	Syntax	OID
hwVlanDownCarId The index of the table, indicates a down direct carid.	Integer32 Constraints: range: 1-4000	.1.3.6.1.4.1.2011.5.6.1.16.1.1
hwVlanDownCarName Down direct car name.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.6.1.16.1.2
hwVlanDownCarBandValue Car band value,The car value is multiple of 64kbps. Unit: kbps	Integer32r/w Constraints: range: 64-1048512	.1.3.6.1.4.1.2011.5.6.1.16.1.3
hwVlanDownCarBurstValue Car burst value. Unit: kbps	Integer32r/w Constraints: range: 2-8192	.1.3.6.1.4.1.2011.5.6.1.16.1.4
hwVlanDownCarIsUsed The flag indicates whether the carid is used. Options: 1. used(1) -The carid is used. 2. noUsed(2) -The carid is no-used.	Enumeration Enumerated Values: 1 used 2 noUsed	.1.3.6.1.4.1.2011.5.6.1.16.1.5
hwVlanDownCarRowStatus Row status, now support createAndGo(4),destroy(6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.6.1.16.1.6

Indicates the VLAN parameters, include hwVlanParaIndex, hwVlanMacLearnCpability, hwVlanMaxMacLearnNum,
hwVlanUpdirectCar, hwVlanDownDirectCar, it is used to configure the VLAN param.
The index of this table is hwVlanParamIndex.

hwVlanParaEntry row .1.3.6.1.4.1.2011.5.6.1.17.1

Indicates the VLAN parameters, include hwVlanParaIndex, hwVlanMacLearnCpability, hwVlanMaxMacLearnNum,
hwVlanUpdirectCar, hwVlanDownDirectCar, it is used to configure the VLAN param.
The index of this entry is hwVlanPar…

Indexes

hwVlanParaIndex

Column	Syntax	OID
hwVlanParaIndex The index of the table,the VLAN index means Vlan Id.	VlanIndex	.1.3.6.1.4.1.2011.5.6.1.17.1.1
hwVlanMacLearnCpability MAC learning or not flag by VLAN. Options: 1. enabled(1) -Enable MAC learning by VLAN. 2. disabled(2) -Disable MAC learning by VLAN.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.6.1.17.1.2
hwVlanMaxMacLearnNum The VLAN max mac learn number.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.5.6.1.17.1.3
hwVlanUpDirectCarID The VLAN up direct carID.	Integer32r/w Constraints: range: 1-4000	.1.3.6.1.4.1.2011.5.6.1.17.1.4
hwVlanDownDirectCarID The VLAN down direct carID.	Integer32r/w Constraints: range: 1-4000	.1.3.6.1.4.1.2011.5.6.1.17.1.5

Used for setting and querying the status of the L2 transparent transmission of BPDU packets.
The index of this table is hwVlanIndex.

hwBpduTunnelEntry row .1.3.6.1.4.1.2011.5.6.1.18.1

Used for setting and querying the status of the L2 transparent transmission of BPDU packets.
The index of this entry is hwVlanIndex.

Indexes

hwVlanIndex

Column	Syntax	OID
hwBpduTunnel Indicates the status of the L2 transparent transmission of BDPU packets in a VLAN. Options: 1. enable(1) -Enable transparent transmission of BDPU packets in a VLAN. 2. disable(2) -Disable transparent transm…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.6.1.18.1.1

VOIP multiply IP table.
The index of this table is hwVOIPAddressIndex

hwVOIPAddressEntry row .1.3.6.1.4.1.2011.5.6.1.19.1

VOIP multiply IP table.
The index of this entry is hwVOIPAddressIndex

Indexes

hwVOIPAddressIndex

Column	Syntax	OID
hwVOIPAddressIndex the index scope is 0-63	Unsigned32 Constraints: range: 4294967295-4294967295 range: 0-63	.1.3.6.1.4.1.2011.5.6.1.19.1.1
hwVOIPIPType Indicates the type of VOIP IP. Options: 1. media(1) -indicates that the type of VOIP IP is media. 2. signaling(2) -indicates that the type of VOIP IP is signaling.	Enumerationr/w Enumerated Values: 1 media 2 signaling	.1.3.6.1.4.1.2011.5.6.1.19.1.2
hwVOIPIPAddress IP address	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.6.1.19.1.3
hwVOIPSubMask subMask of VAG	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.6.1.19.1.4
hwVOIPGateway gateway of VAG	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.6.1.19.1.5
hwVOIPMACAddress MAC address	OctetString Constraints: range: 1-17	.1.3.6.1.4.1.2011.5.6.1.19.1.6
hwVOIPVlanTagIdentifier vlanid of VAG	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.2011.5.6.1.19.1.7
hwVOIPQosIPStrategy Indicates the qos ip strategy Options: 1. tos(1) -indicates that the qos ip strategy is tos. 2. dscp(2) -indicates that the qos ip strategy is dscp.	Enumeration Enumerated Values: 1 tos 2 dscp	.1.3.6.1.4.1.2011.5.6.1.19.1.8
hwVOIPAddressRowStatus Indicates the status of this conceptual row. Options: 1. active(1) 2. createAndGo(4) 3. destroy(6) Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of th…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.6.1.19.1.9
hwVOIPAddressObtainMode ip address obtain mode: Options: 1. static(1) -static config 2. pppoe(2) -pppoe dynamic obtain 3. dhcp(3) -dhcp dynamic obtain	Enumeration Enumerated Values: 1 static 2 pppoe 3 dhcp	.1.3.6.1.4.1.2011.5.6.1.19.1.10
hwVOIPPPPOEClientName ip address name of pppoe dynamic obtain, the same as pppoe client name	OctetString Constraints: range: 0-65	.1.3.6.1.4.1.2011.5.6.1.19.1.11
hwVOIPIPAddressSrc Indicates the source type of IP. Options: 1. static(0) -indicates that the source type of IP is static. 2. dhcp(1) -indicates that the source type of IP is dhcp.	Enumeration Enumerated Values: 0 static 1 dhcp	.1.3.6.1.4.1.2011.5.6.1.19.1.12

Describes the Qos IP tos and VLAN priority
The index of this table is hwVOIPAddressIndex

hwVOIPQosEntry row .1.3.6.1.4.1.2011.5.6.1.20.1

Describes the Qos IP tos and VLAN priority
The index of this entry is hwVOIPAddressIndex

Indexes

hwVOIPAddressIndex

Column	Syntax	OID
hwVOIPQosIPTosValue Qos value of tos	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.5.6.1.20.1.1
hwVOIPQosIPDscpValue Qos value of dscp	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.5.6.1.20.1.2
hwVOIPQosVlanPriority Qos VLAN priority	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.5.6.1.20.1.3
hwVOIPQosIPAddressSrc Indicates the source type of IP. Options: 1. static(0) -indicates that the source type of IP is static. 2. dhcp(1) -indicates that the source type of IP is dhcp.	Enumeration Enumerated Values: 0 static 1 dhcp	.1.3.6.1.4.1.2011.5.6.1.20.1.4

Used for setting and querying the status of the L2 transparent transmission of RIP packets and VTP/CDP packets in a VLAN.
The index of this table is hwVlanIndex.

hwPacketTunnelEntry row .1.3.6.1.4.1.2011.5.6.1.21.1

Used for setting and querying the status of the L2 transparent transmission of RIP packets and VTP/CDP packets in a VLAN.
The index of this entry is hwVlanIndex.

Indexes

hwVlanIndex

Column	Syntax	OID
hwPacketTunnelRip Indicates the transparent transmission of RIP packets in a VLAN. Options: 1. enable(1) -Enable transparent transmission of RIP packets in a VLAN. 2. disable(2) -Disable transparent transmission of RIP packe…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.6.1.21.1.1
hwPacketTunnelVTPCDP Indicates the transparent transmission of VTP/CDP packets in a VLAN. Options: 1. enable(1) -Enable transparent transmission of VTP/CDP packets in a VLAN. 2. disable(2) -Disable transparent t…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.6.1.21.1.2

Describes management of the secondary IP addresses of a VLAN interface.
The indexes of this table are hwVlanInterfaceIDWithSub, hwVlanSubIpAddress and hwVlanSubIpAddressMask.

hwVlanInterfaceSubIpAddrEntry row .1.3.6.1.4.1.2011.5.6.1.22.1

Describes management of the secondary IP addresses of a VLAN interface.
The indexes of this entry are hwVlanInterfaceIDWithSub, hwVlanSubIpAddress and hwVlanSubIpAddressMask.

Indexes

hwVlanInterfaceIDWithSub hwVlanSubIpAddress hwVlanSubIpAddressMask

Column	Syntax	OID
hwVlanInterfaceIDWithSub Indicates the index of a VLAN interface, which maps a VLAN ID. For example, the index of VLAN interface 3 is 3.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.6.1.22.1.1
hwVlanSubIpAddress Indicates the secondary IP address of a VLAN interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.6.1.22.1.2
hwVlanSubIpAddressMask Indicates the subnet mask of the secondary IP address of a VLAN interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.6.1.22.1.3
hwInterfaceSubIpAddrRowStatus Indicates the row status. It is used for create, modify and delete operations. Options: 1. createAndGo(4) 2. destroy(6) 3. active(1)	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.6.1.22.1.4

Describes the attributes of a VLAN service profile, used for adding or deleting
a VLAN service profile, or modifying the status of the attributes in an existing
VLAN service profile.
The index of this table is hwVlanSrvProfName.

hwVlanSrvProfEntry row .1.3.6.1.4.1.2011.5.6.1.25.1

Describes the attributes of a VLAN service profile, used for adding or deleting
a VLAN service profile, or modifying the status of the attributes in an existing
VLAN service profile.
The index of this entry is hwVlanSrv…

Indexes

hwVlanSrvProfName

Column	Syntax	OID
hwVlanSrvProfName Indicates the name of the VLAN service profile. Range: a string of 1-32 characters The input index consists of the VLAN service profile name and the length of the VLAN service profile name. The input VLAN service profil…	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.2011.5.6.1.25.1.1
hwForwardingMode Indicates the VLAN forwarding policy. Options: 1. vlanMac(1) -indicates forwarding based on the VLAN+MAC. 2. vlanConnect(2) -indicates forwarding based on the SVLAN+CVLAN. 3. notConfig(3) -indicates forwarding bas…	Enumerationr/w Enumerated Values: 1 vlanMac 2 vlanConnect 3 notConfig	.1.3.6.1.4.1.2011.5.6.1.25.1.2
hwAntiIpSpoofingSwitch Indicates the VLAN-based anti-IP-spoofing function. Options: 1. enable(1) -indicates that the anti-IP-spoofing function is enabled. 2. disable(2) -indicates that the anti-IP-spoofing function is disabled. This leaf is o…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.6.1.25.1.3
hwAntiMacSpoofingSwitch Indicates the VLAN-based anti-MAC-spoofing function. Options: 1. enable(1) -indicates that the anti-MAC-spoofing function is enabled. 2. disable(2)-indicates that the anti-MAC spoofing function is disabled. 3. notConfig…	Enumerationr/w Enumerated Values: 1 enable 2 disable 3 notConfig	.1.3.6.1.4.1.2011.5.6.1.25.1.4
hwPPPoEMacMode Indicates the VLAN-based PPPoE single-MAC function. Options: 1. multiMac(1) -indicates that the multi-MAC mode is adopted. 2. singleMac(2) -indicates that the single-MAC mode is adopted. 3. notConfig(3) -indicate by V…	Enumerationr/w Enumerated Values: 1 multiMac 2 singleMac 3 notConfig	.1.3.6.1.4.1.2011.5.6.1.25.1.5
hwBpduTunnelSwitch Indicates the VLAN-based BPDU transparent transmission function. Options: 1. enable(1) -indicates that the BPDU transparent transmission function is enabled. 2. disable(2) -indicates that the BPDU transparent transmiss…	Enumerationr/w Enumerated Values: 1 enable 2 disable 3 notConfig	.1.3.6.1.4.1.2011.5.6.1.25.1.6
hwRipTunnelSwitch Indicates the VLAN-based RIP transparent transmission function. Options: 1. enable(1) -indicates that the RIP transparent transmission function is enabled. 2. disable(2) -indicates that the RIP transparent transmission…	Enumerationr/w Enumerated Values: 1 enable 2 disable 3 notConfig	.1.3.6.1.4.1.2011.5.6.1.25.1.7
hwVtpCdpTunnelSwitch Indicates the VLAN-based VTP/CDP transparent transmission function. Options: 1. enable(1) -indicates that the VTP/CDP transparent transmission function is enabled. 2. disable(2) -indicates that the VTP/CDP transparent …	Enumerationr/w Enumerated Values: 1 enable 2 disable 3 notConfig	.1.3.6.1.4.1.2011.5.6.1.25.1.8
hwDhcpMode Indicates the VLAN-based DHCP L2/L3 mode switch. Options: 1. notConfig(1) -indicates that if the VLAN configuration exists, the VLAN configuration takes effect. Otherwise, the conf…	Enumerationr/w Enumerated Values: 1 notConfig 2 layer2 3 l3Standard 4 l3Option60 5 l3MacRange	.1.3.6.1.4.1.2011.5.6.1.25.1.9
hwDhcpProxySwitch Indicates the VLAN-based DHCP proxy function. Options: 1. enable(1) -indicates that the DHCP proxy is enabled. 2. disable(2) -indicates that the DHCP proxy is disabled. This leaf is optional for creating a VLAN service…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.6.1.25.1.10
hwDhcpOption82Switch Indicates the VLAN-based DHCP option 82 function. Options: 1. enable(1) -indicates that the DHCP option 82 function is enabled. 2. disable(2) -indicates that the DHCP option 82 function is disabled. This leaf is option…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.6.1.25.1.11
hwPitpSwitch Indicates the PITP switch based on VLAN. Options: 1. enable(1) -indicates enabling the PITP switch. 2. disable(2) -indicates disabling the PITP switch. This leaf is optional for creating a VLAN service profile. Leaf hw…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.6.1.25.1.12
hwPolicyBroadcast Indicates the VLAN-based forwarding policy for the broadcast packets. Options: 1. forward(1) -indicates that the broadcast packets are transparently transmitted. 2. discard(2) -indicates that the broadcast packets are d…	Enumerationr/w Enumerated Values: 1 forward 2 discard 3 notConfig	.1.3.6.1.4.1.2011.5.6.1.25.1.13
hwPolicyMulticast Indicates the VLAN-based forwarding policy for the unknown multicast packets. Options: 1. forward(1) -indicates that the unknown multicast packets are transparently transmitted. 2. discard(2) -indicates that the unknown…	Enumerationr/w Enumerated Values: 1 forward 2 discard 3 notConfig	.1.3.6.1.4.1.2011.5.6.1.25.1.14
hwPolicyUnknowncast Indicates the VLAN-based forwarding policy for the unknown unicast packets. Options: 1. forward(1) -indicates that the unknown unicast packets are transparently transmitted. 2. discard(2) -indicates that the unknown uni…	Enumerationr/w Enumerated Values: 1 forward 2 discard 3 notConfig	.1.3.6.1.4.1.2011.5.6.1.25.1.15
hwUserBridging Indicates the VLAN-based bridging function. Options: 1. enable(1) -indicates bridging in a VLAN. 2. disable(2) -indicates L2 isolation in a VLAN. This leaf is optional for creating a VLAN service profile.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.6.1.25.1.16
hwDhcpSuppressSwitch DHCP boardcast-suppress switch. Options: 1. enable(1) -Enable DHCP boardcast-suppress. 2. disable(2) -Disable DHCP boardcast-suppress. This leaf is optional for creating a VLAN service profile.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.6.1.25.1.17
hwMismatchIgmpPolicy Indicates the VLAN-based forwarding policy for the mismatched IGMP packets. Options: 1. transparent(1) -indicates that the mismatched IGMP packets are transparently transmitted. 2. discard(2) -indicates that the mismatc…	Enumerationr/w Enumerated Values: 1 transparent 2 discard	.1.3.6.1.4.1.2011.5.6.1.25.1.18
hwVmacStatus Indicates the VLAN-based VMAC function. Options: 1. enable(1) -indicates that the VMAC function is enabled. 2. disable(2) -indicates that the VMAC function is disabled. 3. notConfig(3) -indicate by VLAN single switch…	Enumerationr/w Enumerated Values: 1 enable 2 disable 3 notConfig	.1.3.6.1.4.1.2011.5.6.1.25.1.19
hwIPoEMacMode Indicates the mode of allocating MAC addresses to DHCP users. Options: 1. multiMac(1) -indicates the multi-MAC mode. 2. singleMac(2) -indicates the single-MAC mode. This leaf is optional for creating a VLAN service pro…	Enumerationr/w Enumerated Values: 1 multiMac 2 singleMac	.1.3.6.1.4.1.2011.5.6.1.25.1.20
hwVmacAgingMode Indicates the time selection mode for reallocating VMAC addresses to users. Options: 1. macLearning(1) -indicates that the VMAC addresses are reallocated to users after the corresponding MAC address l…	Enumerationr/w Enumerated Values: 1 macLearning 2 dhcp	.1.3.6.1.4.1.2011.5.6.1.25.1.21
hwFabricMacLearningSwitch Indicates the VLAN-based MAC address learning capability switch of the control board. Options: 1. enable(1) -indicates that the VLAN-based MAC address learning is enabled. 2. disable(2) -indicates that the VLAN-based M…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.6.1.25.1.22
hwOspfTunnelSwitch Indicates the VLAN-based OSPF transparent transmission function. Options: 1. enable(1) -indicates that the OSPF transparent transmission function is enabled. 2. disable(2) -indicates that the OSPF transparent transmiss…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.6.1.25.1.23
hwL3ProtocolTunnelSwitch Indicates the VLAN-based L2 transparent transmission function of other L3 protocol packets except RIP and OSPF packets. Options: 1. enable(1) -indicates that the transparent transmission function is enabled. 2. disable…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.6.1.25.1.24
hwDhcpv6Mode Indicates the VLAN-based DHCPv6 L2/L3 mode switch. Options: 1. notConfig(1) -indicates that the configuration in global mode takes effect. 2. layer2(2) -indicates the DHCPv6 L2 forwarding mode. …	Enumerationr/w Enumerated Values: 1 notConfig 2 layer2 3 layer3 4 layer3option16	.1.3.6.1.4.1.2011.5.6.1.25.1.25
hwDhcpv6OptionSwitch Indicates the VLAN-based DHCPv6 option function. Options: 1. enable(1) -indicates that the DHCPv6 option 18 and optin 37 function are enabled. 2. disable(2) -indicates that the DHCPv6 option 18 and optin 37 function ar…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.6.1.25.1.26
hwVmacIPoESubStatus Indicates the VLAN-based IPoE VMAC function. Options: 1. enable(1) -indicates that the IPoE VMAC function is enabled. 2. disable(2) -indicates that the IPoE VMAC function is disabled. 3. notConfig(3) -indicate b…	Enumerationr/w Enumerated Values: 1 enable 2 disable 3 notConfig	.1.3.6.1.4.1.2011.5.6.1.25.1.27
hwVmacPPPoESubStatus Indicates the VLAN-based PPPoE VMAC function. Options: 1. enable(1) -indicates that the PPPoE VMAC function is enabled. 2. disable(2) -indicates that the PPPoE VMAC function is disabled. 3. notConfig(3) -indicat…	Enumerationr/w Enumerated Values: 1 enable 2 disable 3 notConfig	.1.3.6.1.4.1.2011.5.6.1.25.1.28
hwVmacPPPoASubStatus Indicates the VLAN-based PPPoA VMAC function. Options: 1. enable(1) -indicates that the PPPoA VMAC function is enabled. 2. disable(2) -indicates that the PPPoA VMAC function is disabled. 3. notConfig(3) -indicat…	Enumerationr/w Enumerated Values: 1 enable 2 disable 3 notConfig	.1.3.6.1.4.1.2011.5.6.1.25.1.29
hwPPPoAMacMode Indicates the VLAN-based PPPoA single-MAC function. Options: 1. multiMac(1) -indicates that the multi-MAC mode is adopted. 2. singleMac(2) -indicates that the single-MAC mode is adopted. 3. notConfig(3) -indicate…	Enumerationr/w Enumerated Values: 1 multiMac 2 singleMac 3 notConfig	.1.3.6.1.4.1.2011.5.6.1.25.1.30
hwAntiIpv6SpoofingSwitch Indicates the VLAN-based anti-IPv6-spoofing function. Options: 1. enable(1) -indicates that the anti-IPv6-spoofing function is enabled. 2. disable(2) -indicates that the anti-IPv6-spoofing function is disabled. This le…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.6.1.25.1.31
hwIpv6DadProxySwitch Indicates the VLAN-based IPv6 dad proxy function. Options: 1. enable(1) -indicates that the IPv6 dad proxy function is enabled. 2. disable(2) -indicates that the IPv6 dad proxy function is disabled. This leaf is option…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.6.1.25.1.32
hwIpv6BindRouteAndNdSwitch Indicates the VLAN-based bind-route-nd function. Options: 1. enable(1) -indicates that the bind-route-nd function is enabled. 2. disable(2) -indicates that the bind-route-nd function is disabled. This leaf is optional …	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.6.1.25.1.33
hwIpv6NsReplySwitch Indicates the VLAN-based ns reply function. Options: 1. enable(1) -indicates that the ns reply function is enabled. 2. disable(2) -indicates that the ns reply function is disabled. This leaf is optional for creating a …	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.6.1.25.1.34
hwIpv4ArpReplySwitch Indicates the VLAN-based arp reply function. Options: 1. enable(1) -indicates that the arp reply function is enabled. 2. disable(2) -indicates that the arp reply function is disabled. This leaf is optional for creating…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.6.1.25.1.35
hwDhcpRelayInterfaceRelayAgentSwitch Indicates the VLAN-based filling mode of the GIADDR field of the current DHCP-relay upstream packet. Options: 1. receive(1) -indicates that in the DHCP packet sent from the DHCP relay agent to the server, …	Enumerationr/w Enumerated Values: 1 receive 2 send 3 notConfig	.1.3.6.1.4.1.2011.5.6.1.25.1.36
hwPolicyMulticastFabric Indicates the VLAN-based forwarding policy for the control board unknown multicast packets. Options: 1. forward(1) -indicates that the control board unknown multicast packets are transparently transmitted. 2. discard(2)…	Enumerationr/w Enumerated Values: 1 forward 2 discard	.1.3.6.1.4.1.2011.5.6.1.25.1.37
hwCableSourceVerify Indicates VLAN-based Source Address Verification (SAV) function for CM configured policies. Options: 1. enable(1) -indicates that the VLAN-based Source Address Verification for CM configured policies ar…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.6.1.25.1.38
hwRipngTunnelSwitch Indicates the VLAN-based RIPng transparent transmission function. Options: 1. enable(1) -indicates that the RIPng transparent transmission function is enabled. 2. disable(2) -indicates that the RIPng transparent transm…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.6.1.25.1.39
hwIpv4ArpUnicastSwitch Indicates the VLAN-based ARP unicast function. Options: 1. enable(1) -indicates that the ARP unicast function is enabled. 2. disable(2) -indicates that the ARP unicast function is disabled. This leaf is optional for cr…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.6.1.25.1.40
hwIpv4ArpUnicastunkonwnpolicy Used for setting whether to forward or discard ARP packets received from the network side when the user is offline. It takes effect only when the ARP unicast function is enabled. Options: 1. forward(1) -indicates that …	Enumerationr/w Enumerated Values: 1 forward 2 discard	.1.3.6.1.4.1.2011.5.6.1.25.1.41
hwIpv6NsUnicastSwitch Indicates the VLAN-based NS unicast function. Options: 1. enable(1) -indicates that the NS unicast function is enabled. 2. disable(2) -indicates that the NS unicast function is disabled. This leaf is optional for creat…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.6.1.25.1.42
hwIpv6NsUnicastunkonwnpolicy Used for setting whether to forward or discard NS packets received from the network side when the user is offline. It takes effect only when the NS unicast function is enabled. Options: 1. forward(1) -indicates that NS…	Enumerationr/w Enumerated Values: 1 forward 2 discard	.1.3.6.1.4.1.2011.5.6.1.25.1.43
hwIgmpUserMaxVlanTag Indicates the VLAN-based IGMP user max VLAN tag mode. Options: 1. unaware(1) -indicates that the maximum number of VLAN tags for the IGMP user is not concerned. 2. untag(2) -indicates that the maximum number of VLA…	Enumerationr/w Enumerated Values: 1 unaware 2 untag 3 single 4 double	.1.3.6.1.4.1.2011.5.6.1.25.1.44
hwRouterRedirectReverse Indicates the Layer 2 forwarding function of reverse Router-Redirect packets. Options: 1. enable(1) -indicates that the Layer 2 forwarding function of reverse Router-Redirect packets is enabled. 2. disable(2) -indicate…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.6.1.25.1.45
hwCableIPv6SourceVerify Indicates VLAN-based IPv6 Source Address Verification (SAV) function for CM configured policies. Options: 1. enable(1) -indicates that the VLAN-based IPv6 Source Address Verification for CM configured p…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.6.1.25.1.46
hwAntiMacDuplicateSwitch Indicates the VLAN-based mac-duplicate function. Options: 1. enable(1) -indicates that the mac-duplicate function is enabled. 2. disable(2) -indicates that the mac-duplicate function is disabled. 3. notConfig(3) …	Enumerationr/w Enumerated Values: 1 enable 2 disable 3 notConfig	.1.3.6.1.4.1.2011.5.6.1.25.1.47
hwArpDetectMaxUserCountSwitch Indicates the VLAN-based arp-detect max-user-count function. Options: 1. enable(1) -indicates that the arp-detect max-user-count function is enabled. 2. disable(2) -indicates that the arp-detect max-user-count function…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.6.1.25.1.48
hwDhcpOption82CaptureArpSwitch Indicates the VLAN-based DHCP option 82 capture ARP function. Options: 1. enable(1) -enable ARP packet capturing when DHCP option82 is enabled. 2. disable(2) -disable ARP packet capturing when DHCP option82 is enabled.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.6.1.25.1.49
hwDhcpv6OptionCaptureNaSwitch Indicates the VLAN-based DHCPv6 option capture NA function. Options: 1. enable(1) -enable NA packet capturing when DHCPv6 option is enabled. 2. disable(2) -disable NA packet capturing when DHCPv6 option is enabled.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.6.1.25.1.50
hwProfileRowStatus Indicates the row status, used for creating or deleting a VLAN profile. Options: 1. active(1) 2. createAndGo(4) 3. destroy(6) To create a VLAN service profile, set hwProfileRowStatus to createAndGo(4) to perform the set…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.6.1.25.1.255

Enables or disables the IP aware function of a VLAN. After the IP aware function
is enabled, the destination IP address of the IP packets forwarded in the VLAN
will be perceived and the packets will be forwarded to different gateways according
to different destination IP addresses.
The index of this table is hwVlanIpAwareVlanID.

hwVlanIpAwareEntry row .1.3.6.1.4.1.2011.5.6.1.27.1

Enables or disables the IP aware function of a VLAN. After the IP aware function
is enabled, the destination IP address of the IP packets forwarded in the VLAN
will be perceived and the packets will be forwarded to diff…

Indexes

hwVlanIpAwareVlanID

Column	Syntax	OID
hwVlanIpAwareVlanID Indicates the ID of the VLAN that needs enabling the IP aware service. Range: 1-4093	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.6.1.27.1.1
hwVlanIpAwareVrfName Sets the name of the VPN instance bound to a VLAN. The default value is public network. It is a character string and the length range is 1-31.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.6.1.27.1.2
hwVlanIpAwareRowStatus Indicates the row status. It is used to enable or disable the IP aware function. Options: 1. active(1) 2. createAndGo(4) 3. destroy(6) Only options createAndGo(4) and destroy(6) support the set operation. During query, …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.6.1.27.1.3
hwVlanIpAwareSrcIPMode Indicates the source IP address obtaining mode of the ARP request. Options: 1. clientIp(1) -The source IP address obtaining mode is client IP. 2. virtualIp(2) -The source IP address obtaining mode…	Enumerationr/w Enumerated Values: 1 clientIp 2 virtualIp	.1.3.6.1.4.1.2011.5.6.1.27.1.4
hwVlanIpAwareArpSendPeriod Indicates the period for sending ARP requests. Range: 5-3600 Unit: second Default: 180s	Integer32r/w Constraints: range: 5-3600	.1.3.6.1.4.1.2011.5.6.1.27.1.5

Configures the virtual IP address of a VLAN. After the IP aware function
of a VLAN is enabled, the VLAN needs to obtain the gateway MAC address
through the ARP request and use the configured virtual IP address as the
source IP address of the ARP request.
The indexes of this table are hwIpAwareVirtualIPVlanID,hwIpAwareVirtualIP,
and hwIpAwareVirtualIPMask.

hwIpAwareVirtualIPEntry row .1.3.6.1.4.1.2011.5.6.1.28.1

Configures the virtual IP address of a VLAN. After the IP aware function
of a VLAN is enabled, the VLAN needs to obtain the gateway MAC address
through the ARP request and use the configured virtual IP address as the
so…

Indexes

hwIpAwareVirtualIPVlanID hwIpAwareVirtualIP hwIpAwareVirtualIPMask

Column	Syntax	OID
hwIpAwareVirtualIPVlanID Indicates the table index. It is the ID of the VLAN that needs configuring a virtual IP address.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.6.1.28.1.1
hwIpAwareVirtualIP Indicates the virtual IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.6.1.28.1.2
hwIpAwareVirtualIPMask Indicates the mask of the virtual IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.6.1.28.1.3
hwIpAwareVirtualIPRowStatus Indicates the row status and is used for creating or deleting an IP address. Options: 1. active(1) 2. createAndGo(4) 3. destroy(6) Only options createAndGo(4) and destroy(6) support the set operation. During query, acti…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.6.1.28.1.4

Configures the dedicated static route of the IP aware service. When a VLAN whose IP aware
function is enabled is used to forward IP packets, a static route is required so that packets
with different IP address segments can be forwarded to the gateway.
The indexes of this table are hwIpAwareRouteDstIP, hwIpAwareRouteMask and hwIpAwareRouteVlanID.

hwIpAwareRouteEntry row .1.3.6.1.4.1.2011.5.6.1.29.1

Configures the dedicated static route of the IP aware service. When a VLAN whose IP aware
function is enabled is used to forward IP packets, a static route is required so that packets
with different IP address segments …

Indexes

hwIpAwareRouteDstIP hwIpAwareRouteMask hwIpAwareRouteVlanID

Column	Syntax	OID
hwIpAwareRouteDstIP Indicates the destination IP address of the static route. It is a table index.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.6.1.29.1.1
hwIpAwareRouteMask Indicates the static route mask. It is a table index.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.6.1.29.1.2
hwIpAwareRouteVlanID Indicates the VLAN of the static route. It is a table index.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.6.1.29.1.3
hwIpAwareRouteNexthopIP Indicates the gateway IP address of the static route.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.6.1.29.1.4
hwIpAwareRouteRowStatus Indicates the row status and is used for creating or deleting a static route. Options: 1. active(1) 2. createAndGo(4) 3. destroy(6) Only options createAndGo(4) and destroy(6) are supported the set operation. During quer…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.6.1.29.1.5

Indicates the Qos IP tos and VLAN priority.
The indexes of this table are hwVOIPDhcpVlanID and hwVOIPDhcpQosType.

hwVOIPDhcpQosEntry row .1.3.6.1.4.1.2011.5.6.1.35.1

Indicates the Qos IP tos and VLAN priority.
The indexes of this entry are hwVOIPDhcpVlanID and hwVOIPDhcpQosType.

Indexes

hwVOIPDhcpVlanID hwVOIPDhcpQosType

Column	Syntax	OID
hwVOIPDhcpVlanID Indicates the service VLAN. Range: 1-4093.	Integer32 Constraints: range: 1-4093	.1.3.6.1.4.1.2011.5.6.1.35.1.1
hwVOIPDhcpQosType Indicates the type of QOS. The value 0 indicates that the type of QOS is signaling. The value 1 indicates that the type of QOS is media.	Integer32 Constraints: range: 0-1	.1.3.6.1.4.1.2011.5.6.1.35.1.2
hwVOIPDhcpQosIPTos Indicates the Qos value of tos. Range: -1, 0-255. -1 indicates that the Qos value is invalid.	Integer32r/w Constraints: range: -1-255	.1.3.6.1.4.1.2011.5.6.1.35.1.3
hwVOIPDhcpQosIPDscp Indicates the Qos value of dscp. Range: -1, 0-255. -1 indicates that the Qos value is invalid.	Integer32r/w Constraints: range: -1-255	.1.3.6.1.4.1.2011.5.6.1.35.1.4
hwVOIPDhcpQosVlanPriority Indicates the Qos VLAN priority. Range: 0-7.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.5.6.1.35.1.5
hwVOIPDhcpQosRowStatus Indicates the status of this conceptual row. Options: 1. active(1) 2. createAndGo(4) 3. destroy(6)	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.6.1.35.1.6

Describes the Ethernet protocol type of the outer VLAN tag of a port.
The index of this table is ifIndex (for details about how to calculate the value of
ifIndex, see the MA5600T ifIndex MIB Encoding Rules).

hwPortOuterEthernetTypeEntry row .1.3.6.1.4.1.2011.5.6.1.65002.1

Describes the Ethernet protocol type of the outer VLAN tag of a port.
The index of this entry is ifIndex (for details about how to calculate the value of
ifIndex, see the MA5600T ifIndex MIB Encoding Rules).

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwPortOuterEthernetType Indicates the Ethernet protocol type of the outer VLAN tag of a port. Options: 1. invalid(-1) -it indicates that the port does not support the Ethernet protocol type of the outer VLAN. During the que…	Enumerationr/w Enumerated Values: -1 invalid 1 dot1qTpid 2 dot1adTpid	.1.3.6.1.4.1.2011.5.6.1.65002.1.1

Indicates the Local VLAN, it is used to configure the Local VLAN.
The index of this table is hwVlanIndex.

hwLocalVlanEntry row .1.3.6.1.4.1.2011.5.6.1.65004.1

Indicates the Local VLAN, it is used to configure the Local VLAN.
The index of this entry is hwVlanIndex.

Indexes

hwVlanIndex

Column	Syntax	OID
hwLocalVlan The flag indicates whether to set the Local VLAN. Options: 1. enable(1) -Enable local VLAN. 2. disable(2) -Disable local VLAN.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.6.1.65004.1.1

Describes the VLAN-based upstream/downstream rate statistics and bandwidth occupancy.
The indexes of this table are hwVlanIndex and hwInnerVlanID.
hwInnerVlanID must be -1, that means the InnerVLAN-based upstream/downstream rate statistics
and bandwidth occupancy are not supported.
If hwVlanFlowAccountTable is being used to query the network-side packet statistics of a VLAN,
querying hwVlanTrafficOccupiedTable fails.

hwVlanTrafficOccupiedEntry row .1.3.6.1.4.1.2011.5.6.1.65005.1

Describes the VLAN-based upstream/downstream rate statistics and bandwidth occupancy.
The indexes of this entry are hwVlanIndex and hwInnerVlanID.
hwInnerVlanID must be -1, that means the InnerVLAN-based upstream/downst…

Indexes

hwVlanIndex hwInnerVlanID

Column	Syntax	OID
hwVlanUplinkTraffic Describes the network-side upstream rate of a VLAN. Unit: kbit/s	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.6.1.65005.1.1
hwVlanDownTraffic Describes the network-side downstream rate of a VLAN. Unit: kbit/s	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.6.1.65005.1.2
hwVlanUplinkBandwidthOccupancyRate Describes the upstream bandwidth occupancy of a VLAN, indicated in percentage.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.6.1.65005.1.3
hwVlanDownBandwidthOccupancyRate Describes the downstream bandwidth occupancy of a VLAN, indicated in percentage.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.6.1.65005.1.4

Indicates information for MPLS VLAN.
The index of this table is hwVlanIndex.

hwMplsVlanEntry row .1.3.6.1.4.1.2011.5.6.1.65006.1

Indicates information for MPLS VLAN.
The index of this entry is hwVlanIndex.

Indexes

hwVlanIndex

Column	Syntax	OID
hwMplsVlanEnable Indicates the MPLS function of a VLAN Options: 1. enable(1) - enable the MPLS function of a VLAN. 2. disable(2) - disable the MPLS function of a VLAN.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.6.1.65006.1.1

Configures the VLAN Connect table.
The indexes of this table are hwVlanConnectOuterVlanID and hwVlanConnectInnerVlanID.

hwVlanConnectEntry row .1.3.6.1.4.1.2011.5.6.1.65007.1

Configures the VLAN Connect table.
The indexes of this entry are hwVlanConnectOuterVlanID and hwVlanConnectInnerVlanID.

Indexes

hwVlanConnectOuterVlanID hwVlanConnectInnerVlanID

Column	Syntax	OID
hwVlanConnectOuterVlanID Indicates the outer VLAN of the VLAN-connect item. It is a table index.	Integer32 Constraints: range: 1-36863 range: -1--1	.1.3.6.1.4.1.2011.5.6.1.65007.1.1
hwVlanConnectInnerVlanID Indicates the inner VLAN of the VLAN-connect item. It is a table index.	Integer32 Constraints: range: 1-4095 range: -1--1	.1.3.6.1.4.1.2011.5.6.1.65007.1.2
hwVlanConnectSrcType Indicates the source point type of VLAN Connect table. Options: 1. port(1) -indicates that hwVlanConnectSrcPara is ifindex. 2. invalid(-1) -indicates that hwVlanConnectSrcPara is invalid.	Enumerationr/w Enumerated Values: -1 invalid 1 port	.1.3.6.1.4.1.2011.5.6.1.65007.1.3
hwVlanConnectSrcPara Indicates the source point value of VLAN Connect table. If hwVlanConnectSrcType is equal to invalid(-1), this leaf indicates invalid. If hwVlanConnectSrcType is equal to port(1), this leaf indicates ifindex.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.6.1.65007.1.4
hwVlanConnectDstType Indicates the source point type of VLAN-connect table. Options: 1. port(1) -indicates that hwVlanConnectDstPara is ifindex. 2. flow(2) -indicates that hwVlanConnectDstPara is flow index. 3. bundle(3) -indicates that hwV…	Enumerationr/w Enumerated Values: -1 invalid 1 port 2 flow 3 bundle	.1.3.6.1.4.1.2011.5.6.1.65007.1.5
hwVlanConnectDstPara Indicates the source point value of VLAN-connect table. If hwVlanConnectDstType is equal to invalid(-1), this leaf indicates invalid. If hwVlanConnectDstType is equal to port(1), this leaf indicates ifindex. If hwVlanCo…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.6.1.65007.1.6
hwVlanConnectRowStatus Indicates the row status and is used for creating or deleting VLAN-connect item. Options: 1. active(1) 2. createAndGo(4) 3. destroy(6) Only options createAndGo(4) and destroy(6) are supported the set operation. During q…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.6.1.65007.1.255

This is the service svlan of DOCSIS table.
This table is used to configure the service svlan of DOCSIS service board.
The indexes of this table are hwFrameIndex and hwSlotIndex.

hwDocsSrvVlanIDEntry row .1.3.6.1.4.1.2011.5.6.1.65009.1

This is the service svlan of DOCSIS table.
This table is used to configure the service svlan of DOCSIS service board.
The indexes of this entry are hwFrameIndex and hwSlotIndex.

Indexes

HUAWEI-DEVICE-MIBhwFrameIndex HUAWEI-DEVICE-MIBhwSlotIndex

Column	Syntax	OID
hwDocsSrvVlanID Indicates the service svlan of DOCSIS service board. Range: 1-4093. -1 indicates that hwDocsSrvVlanID is invalid.	Integer32r/w Constraints: range: -1--1 range: 1-4093	.1.3.6.1.4.1.2011.5.6.1.65009.1.1
hwDocsSrvVlanRowStatus Indicates the row status, used for creating or deleting a service VLAN of DOCSIS service board. Options: 1. active(1) 2. createAndGo(4) 3. destroy(6) To create a service VLAN, you must specify hwDocsSrvVlanID and set hw…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.6.1.65009.1.2

Indicates the Ethernet protocol type of the outer VLAN tag of a port and VLAN.
The indexes of this table are ifIndex and hwPortVlanOuterEthernetTypeVlanid.

hwPortVlanOuterEthernetTypeEntry row .1.3.6.1.4.1.2011.5.6.1.65011.1

Indicates the Ethernet protocol type of the outer VLAN tag of a port and VLAN.
The indexes of this entry are ifIndex and hwPortVlanOuterEthernetTypeVlanid.

Indexes

IF-MIBifIndex hwPortVlanOuterEthernetTypeVlanid

Column	Syntax	OID
hwPortVlanOuterEthernetTypeVlanid Indicates the VLAN ID input in TPID configuration. Range: 1-4095.	Integer32 Constraints: range: 1-4095	.1.3.6.1.4.1.2011.5.6.1.65011.1.1
hwPortVlanOuterEthernetType Indicates the TPID based on port and VLAN. Options: 1. dot1adTpid(2) -indicates that hwPortVlanOuterEthernetType is dot1adTpid	Enumerationr/w Enumerated Values: 2 dot1adTpid	.1.3.6.1.4.1.2011.5.6.1.65011.1.2
hwPortVlanOuterEthernetTypeRowStatus Indicates the row status, used for setting, querying or deleting a hwPortVlanOuterEthernetType. Options: 1. active(1) 2. createAndGo(4) 3. destroy(6) To set a hwPortVlanOuterEthernetType, you must specify hwPortVlanOute…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.6.1.65011.1.3