HUAWEI-VECTOR-MIB Table View

The table hwVectoringGroupTable contains the vectoring group
configuration.
The index of this table is hwVectoringGroupIndex.

hwVectoringGroupEntry row .1.3.6.1.4.1.2011.6.171.2.1

The table hwVectoringGroupTable contains the vectoring group
configuration.
The index of this entry is hwVectoringGroupIndex.

Indexes

hwVectoringGroupIndex

Column	Syntax	OID
hwVectoringGroupIndex This object identifies a row in this table. The vectoring group 1 is the default group, can not add and delete.	Unsigned32 Constraints: range: 1-96	.1.3.6.1.4.1.2011.6.171.2.1.1
hwVectoringGroupNotReqBandsUs This configuration parameter shall be an array of pairs of sub-carrier indices for uptream . Each pair represents the start and stop sub-carrier index of a frequency band in which FEXT cancellation is not required. Up t…	OctetStringr/w Constraints: range: 0-79	.1.3.6.1.4.1.2011.6.171.2.1.2
hwVectoringGroupNotReqBandsDs This configuration parameter shall be an array of pairs of sub-carrier indices for downstream . Each pair represents the start and stop sub-carrier index of a frequency band in which FEXT cancellation is not required. U…	OctetStringr/w Constraints: range: 0-79	.1.3.6.1.4.1.2011.6.171.2.1.3
hwVectoringGroupLinkList This object defines the link list of the vectoring group. This is a string of 4 bytes of values indicates the port ifindex. It can contain as most as 1024 link.	OctetStringr/w Constraints: range: 0-4096	.1.3.6.1.4.1.2011.6.171.2.1.4
hwVectoringGroupRowStatus This object is used to create a new row or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.171.2.1.5
hwVectoringGroupProtectionOfNotReqBandsDs This object enable/disable the protection of vectoring lines downstream. This parameter must be used together with hwVectoringGroupNotReqBandsDs. hwVectoringGroupNotReqBandsDs cannot be null when this node is set to ena…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.171.2.1.6
hwVectoringGroupProtectionOfNotReqBandsUs This object enable/disable the protection of vectoring lines upstream. This parameter must be used together with hwVectoringGroupNotReqBandsUs. hwVectoringGroupNotReqBandsUs cannot be null when this node is set to enabl…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.171.2.1.7

The table hwVectoringConfProfTable contains the vectoring profile
configuration.
A default profile with an index of 'DEFVAL' will always exist and
its parameters will be set to vendor-specific values, unless otherwise
specified in this document.
The index of this table is hwVectoringProfName.

hwVectoringConfProfEntry row .1.3.6.1.4.1.2011.6.171.3.1

The table hwVectoringConfProfTable contains the vectoring profile
configuration.
A default profile with an index of 'DEFVAL' will always exist and
its parameters will be set to vendor-specific values, unless otherwise
s…

Indexes

hwVectoringProfName

Column	Syntax	OID
hwVectoringProfName This object identifies a row in this table.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.2011.6.171.3.1.1
hwVectoringEnableUs Enable/Disable FEXT cancellation control upstream. Default values: enable. Options: 1. enable(1) - Enable FEXT cancellation in the upstream direction from all the other vectoring lines into the line in the vectoring gr…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.171.3.1.2
hwVectoringEnableDs Enable/Disable FEXT cancellation control downstream. Default values: enable. Options: 1. enable(1) - Enable FEXT cancellation in the downstream direction from all the other vectoring lines into the line in the vectorin…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.171.3.1.3
hwVectoringProfRowStatus This object is used to create a new row or delete an existing row in this table. Before a profile can be deleted, it must be not referenced from all VDSL ports.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.171.3.1.4
hwVectoringProfLegacyCpeActivatePolicy Vectoring legacy cpe activate policy. Default values:global. Options: 1. noLimit(1) - The legacy cpe is allowed to activated in G.993.2 operation mode 2. block(2) - The legacy cpe…	Enumerationr/w Enumerated Values: 1 noLimit 2 block 3 limit 4 forceFriendlyDsLimitUs 5 forceFriendlyDsNoLimitUs 255 global	.1.3.6.1.4.1.2011.6.171.3.1.5
hwVectoringProfLegacyCpeReservedBand This object is used to set the reserved band of a legacy CPE. The PSD on the frequency band is not shaped and the frequency band can carry traffic. This object takes effect when hwVectoringProfLegacyCpeActivatePolicy is…	OctetStringr/w Constraints: range: 0-79	.1.3.6.1.4.1.2011.6.171.3.1.6
hwVectoringProfLegacyCpeToneBlackoutBand This object is used to set the blackout band of a legacy CPE. The blackout frequency band is disabled and cannot carry traffic. This object takes effect when hwVectoringProfLegacyCpeActivatePolicy is set to limit. Range…	OctetStringr/w Constraints: range: 0-79	.1.3.6.1.4.1.2011.6.171.3.1.7
hwVectoringConfProfLimitProfDsDataRateProf The value of this object identifies the row in the XDSL Data Rate Configuration Profile Table, (hwVOPDataRateConfProfTable) that applies to vectoring link when the line is activated in non-vectoring mode(G.993.2). If th…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.2011.6.171.3.1.8
hwVectoringConfProfLimitProfUsDataRateProf The value of this object identifies the row in the XDSL Data Rate Configuration Profile Table, (hwVOPDataRateConfProfTable) that applies to vectoring link when the line is activated in non-vectoring mode(G.993.2). If th…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.2011.6.171.3.1.9
hwVectoringConfProfLimitProfChanProf The value of this object identifies the row in the VDSL2 Channel Configuration Profile Table, (Vdsl2ChanConfProfileTable) that applies to vectoring link when the line is activated in non-vectoring mode(G.993.2). If the …	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2011.6.171.3.1.10
hwVectoringConfVectoringModeCfg Indicates the access controlling of the type of friendly or vectoring cpe. Bit0 represent vectoring allowed or not allowed,0 represents not allowed,1 represents allowed. bit1 represent full-friendly allowed or not allow…	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.6.171.3.1.11
hwVectoringProfCableType Cable type. Options: 1. atis(1) - ATIS 2. quad(2) - Quad 3. paperInsulated(3) - Paper Insulated 4. tp100(4) - TP100 5. other(5) - Other	Enumerationr/w Enumerated Values: 1 atis 2 quad 3 paperInsulated 4 tp100 5 other	.1.3.6.1.4.1.2011.6.171.3.1.12
hwVectoringProfLegacyCpeRatio Legacy CPE ratio. Options: 0: 1%~15% 1: 15%~25% 2: 25%~50% 3: >50%	Unsigned32r/w Constraints: range: 0-3	.1.3.6.1.4.1.2011.6.171.3.1.13
hwVectoringProfDisorderLeavingThreshold The time between observed loss of US signal and forced cutoff of the DS signal, expressed in DMT symbols.	symbolsUnsigned32r/w Constraints: range: 0-40000	.1.3.6.1.4.1.2011.6.171.3.1.14
hwVectoringConfProfLimitProfLineSpectrumProf The value of this object identifies the row in the XDSL Line Spectrum Configuration Profile Table, (hwVOPLineSpectrumConfProfTable) that applies to vectoring link when the line is activated in non-vectoring mode(G.993.2…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.2011.6.171.3.1.15
hwVectoringConfProfLimitProfUpboProf The value of this object identifies the row in the XDSL Upbo Configuration Profile Table, (hwVOPUPBOConfProfTable) that applies to vectoring link when the line is activated in non-vectoring mode(G.993.2). If the vectori…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.2011.6.171.3.1.16
hwVectoringConfProfGfastFextCanelControlDs Defines whether FEXT cancellation in the downstream direction from all the other vectoring lines into the G.fast line in the vectoring group is enabled or disabled. Options: 1. enable (1) - Enable FEXT cancellati…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.171.3.1.17
hwVectoringConfProfGfastFextCanelControlUs Defines whether FEXT cancellation in the upstream direction from all the other vectoring lines into the G.fast line in the vectoring group is enabled or disabled. Options: 1. enable (1) - Enable FEXT cancellation…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.171.3.1.18

The table hwVectoringPortTable contains port configuration about vectoring.
The index of this table is ifIndex.

hwVectoringPortEntry row .1.3.6.1.4.1.2011.6.171.4.1

The table hwVectoringPortTable contains port configuration about vectoring.
The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwVectoringLinkCfgProf This object configures the vectoring link profile name.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2011.6.171.4.1.1
hwVectoringLinkBelongedVceId The VCE ID uniquely identifies the VCE that manages and controls the vectored group to which the line belongs. It consists of one octet and valid ranges are from 1 to 96. The special value 0 means the line is not in a v…	Unsigned32r/w Constraints: range: 0-96	.1.3.6.1.4.1.2011.6.171.4.1.2
hwVectoringLinkVcePortIndex The VCE port index is the physical index that uniquely identifies the VCE port to which the line is connected. It is an integer from 0 to the maximum number of lines supported by the VCE. The special value 4294967295 me…	Unsigned32 Constraints: range: 0-1024 range: 4294967295-4294967295	.1.3.6.1.4.1.2011.6.171.4.1.3
hwVectoringLinkBandPlanCompatible Options: 1. compatible(1) - The vectoring line configured band plan is compatible with the vectoring band configuration 2. incompatible(2) - The vectoring line configured band plan is not compatible with the vectoring…	Enumeration Enumerated Values: 1 compatible 2 incompatible	.1.3.6.1.4.1.2011.6.171.4.1.4
hwVectoringLinkCPEType If the port is activated, it is the type of the activated CPE. If the port was activated but is not currently activated, it is the type of previsouly activated CPE connected to the port. If the CPE and CO connected to t…	Enumeration Enumerated Values: 1 vectoring 2 fullFriendly 3 friendlyDs 4 legacyVdsl2 5 adsl 6 unknown 7 fast	.1.3.6.1.4.1.2011.6.171.4.1.5
hwVectoringLinkLegacyPolicyUsed Vectoring legacy cpe activate policy. Options: 1. noLimit(1) - The legacy cpe is allowed to activated in G.993.2 operation mode 2. block(2) - The legacy cpe is not allowed to activ…	Enumeration Enumerated Values: -1 invalidValue 1 noLimit 2 block 3 limit 4 forceFriendlyDsLimitUs 5 forceFriendlyDsNoLimitUs	.1.3.6.1.4.1.2011.6.171.4.1.6
hwVectoringLinkFallbackStatus Options: 1. noFallback(1) - The fall back configuration is not in use, or the line works in vectoring mode or ADSL mode(G.992.x operation mode) 2. fallback(2) - The fall back configuration is in use, and…	Enumeration Enumerated Values: 1 noFallback 2 fallback 255 noConfig	.1.3.6.1.4.1.2011.6.171.4.1.7
hwVectoringLinkClearCoefficient Clear current coefficient and history coefficient. Options: 1. clear(1) - Clear the current coefficient and history coefficient 2. invalidValue(-1) - Invalid value	Enumerationr/w Enumerated Values: -1 invalidValue 1 clear	.1.3.6.1.4.1.2011.6.171.4.1.8
hwVectoringLinkLongLoopControlState Indicates the long loop control state. Options: 1. n(0) - Long loop control state is off 2. y(1) - Long loop control state is on 3. invalidValue(-1) - Invalid value	Enumeration Enumerated Values: -1 invalidValue 0 n 1 y	.1.3.6.1.4.1.2011.6.171.4.1.9
hwVectoringLinkLongLoopPolicyUsed Indicates the long loop policy used. Options: 1. nonVectoring(0) - Policy of non-vectoring. If a vectoring port meets long line control requirements, …	Enumeration Enumerated Values: -1 invalidValue 0 nonVectoring 1 nonFextCanceling	.1.3.6.1.4.1.2011.6.171.4.1.10
hwVectoringLinkLongLoopControlRemove Remove the current long loop control. If it is set to true, the control status is removed, and the system returns false upon a reading request. Options: 1. false(0) - The system returns false upon a rea…	Enumerationr/w Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.2011.6.171.4.1.11

The table hwVectoringCrosstalkCouplingMatrixTable contains information of vectoring
crosstalk coupling matrix about a port in a vectoring group.
The indexes of this table are ifIndex and hwVectoringCrosstalkCouplingMatrixDirection.

hwVectoringCrosstalkCouplingMatrixEntry row .1.3.6.1.4.1.2011.6.171.6.1

The table hwVectoringCrosstalkCouplingMatrixTable contains information of vectoring
crosstalk coupling matrix about a port in a vectoring group.
The indexes of this entry are ifIndex and hwVectoringCrosstalkCouplingMatr…

Indexes

IF-MIBifIndex hwVectoringCrosstalkCouplingMatrixDirection

Column	Syntax	OID
hwVectoringCrosstalkCouplingMatrixDirection The direction of the vectoring crosstalk coupling matrix either upstream or downstream.	HUAWEI-XDSL-LINE-TC-MIBHwXdslDirection Type Values: 1 upstream 2 downstream	.1.3.6.1.4.1.2011.6.171.6.1.1
hwVectoringCrosstalkCoupingMatrixOperType This object is used to start the vectoring crosstalk coupling matrix. Options: 1. start(1) - start the vectoring crosstalk coupling matrix 2. stop(2) - stop the vectoring crosstalk coupling matrix	Enumerationr/w Enumerated Values: 1 start 2 stop	.1.3.6.1.4.1.2011.6.171.6.1.2
hwVectoringCrosstalkCoupingMatrixOperResult This object identifies the crosstalk coupling matrix operation result. Options: 1. normal(1) - The crosstalk coupling matrix operation result is normal. 2. fail(2) - The crosstalk coupling matrix o…	Enumeration Enumerated Values: 1 normal 2 fail	.1.3.6.1.4.1.2011.6.171.6.1.3
hwVectoringCrosstalkCouplingMatrixPortIfindexList Ifindex list of port that effect another port in the same vectoring group. This is a string of 4 bytes of values indicates the port ifindex.	OctetString Constraints: range: 0-4096	.1.3.6.1.4.1.2011.6.171.6.1.4
hwVectoringCrosstalkCouplingMatrixAverageMagnitudeList In this matrix must be seen all vectoring subscribers with disturberline. This is a string of 4 bytes of values indicates the port average magnitude. The units is 0.1 dBm/Hz.	OctetString Constraints: range: 0-4096	.1.3.6.1.4.1.2011.6.171.6.1.5
hwVectoringCrosstalkCouplingMatrixCancellationStatusList Indicates whether the impact on the port caused by a disturber port is canceled. The connected link of each port is 1 bit, and the connected link IDs of all the disturber ports form a character string. The byte value in…	OctetString Constraints: range: 0-1024	.1.3.6.1.4.1.2011.6.171.6.1.6
hwVectoringCrosstalkCouplingMatrixPortLocationList Indicates the connected link ID list of the device where the disturber ports locate. The connected link of each port is 1 bit. The byte value indicates: 1. local(0) - Local device 2. peer1(1) - Th…	OctetString Constraints: range: 0-1024	.1.3.6.1.4.1.2011.6.171.6.1.7

The table hwVectoringBoardVectoringStateTable contains the vectoring current running information.
The indexes of this table are hwFrameIndex and hwSlotIndex.

hwVectoringBoardVectoringStateEntry row .1.3.6.1.4.1.2011.6.171.7.1

The table hwVectoringBoardVectoringStateTable contains the vectoring current running information.
The indexes of this entry are hwFrameIndex and hwSlotIndex.

Indexes

HUAWEI-DEVICE-MIBhwFrameIndex HUAWEI-DEVICE-MIBhwSlotIndex

Column	Syntax	OID
hwVectoringVpVectoringInterfaceState The object indicates VCE vectoring interface state. Options: 1. down(1) - vectoring interface state is abnormal 2. up(2) - vectoring interface state is normal 3. invalidValue(-1) - invalid value	Enumeration Enumerated Values: -1 invalidValue 1 down 2 up	.1.3.6.1.4.1.2011.6.171.7.1.1
hwVectoringVdslVectoringInterfaceState The object indicates VDSL vectoring interface state. Options: 1. down(1) - vectoring interface state is abnormal 2. up(2) - vectoring interface state is normal 3. invalidValue(-1) - invalid value	Enumeration Enumerated Values: -1 invalidValue 1 down 2 up	.1.3.6.1.4.1.2011.6.171.7.1.2
hwVectoringVdslVectoringSyncState The object indicates Sync state between VCE and VDSL vectoring interface. Options: 1. noSync(1) - communication between VCE and VDSL is abnormal 2. sync(2) - communication between VCE and VDSL is norma…	Enumeration Enumerated Values: -1 invalidValue 1 noSync 2 sync	.1.3.6.1.4.1.2011.6.171.7.1.3

The table hwVectoringNlvTable contains status parameters of node level vectoring.
The index of this table is hwVectoringNlvPeerId.

hwVectoringNlvEntry row .1.3.6.1.4.1.2011.6.171.11.1

The table hwVectoringNlvTable contains status parameters of node level vectoring.
The index of this entry is hwVectoringNlvPeerId.

Indexes

hwVectoringNlvPeerId

Column	Syntax	OID
hwVectoringNlvPeerId The value of this object identifies the node level vectoring peer equipment.	Unsigned32 Constraints: range: 0-2	.1.3.6.1.4.1.2011.6.171.11.1.1
hwVectoringNlvStatus Indicates current status of node level vectoring. This is a bit-map of possible conditions. The various bit positions are: 1. noDefect(0) - This bit position positively reports that no defect exists 2. datap…	Bits Enumerated Values: 0 noDefect 1 datapathfault 2 managementpathfault 3 clocksyncfault 4 fault 5 disable	.1.3.6.1.4.1.2011.6.171.11.1.2
hwVectoringNlvPeerEquipmentSysMac A 6-octet read-only value carrying the individual MAC address of the node level vectoring peer equipment.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.6.171.11.1.3
hwVectoringNlvDescription Indicates description information of the node level vectoring peer equipment.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2011.6.171.11.1.4
hwVectoringNlvTimestamp Indicates start time of the node level vectoring peer equipment.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2011.6.171.11.1.5
hwVectoringNlvGroupDslamList Indicates infiniband port description information of the node level vectoring peer equipment.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.2011.6.171.11.1.6
hwVectoringNlvClockSource Indicates clock source of the node level vectoring peer equipment. 1. local(0) - The local device clock is used as the clock source 2. peer1(1) - The first peer device clock is used as the clock so…	Enumeration Enumerated Values: 0 local 1 peer1 2 peer2	.1.3.6.1.4.1.2011.6.171.11.1.7
hwVectoringNlvFaultReason Indicates the the reason of the node level vectoring fault. 1. normal(1) - The node level vectoring is normal 2. nlvConnectionFail(2) - The node level vectoring fault reason is nlv con…	Enumeration Enumerated Values: 1 normal 2 nlvConnectionFail 3 vectoringDisabled 4 nlvConfigurationInconsistent 5 synchronizationAbnormal 6 nlvDisabled	.1.3.6.1.4.1.2011.6.171.11.1.8

Indicates the configuration of vectoring running information collection.
The indexes of this table are hwFrameIndex and hwSlotIndex.

hwVectoringVceRunInfoCollectEntry row .1.3.6.1.4.1.2011.6.171.13.1

Indicates the configuration of vectoring running information collection.
The indexes of this entry are hwFrameIndex and hwSlotIndex.

Indexes

HUAWEI-DEVICE-MIBhwFrameIndex HUAWEI-DEVICE-MIBhwSlotIndex

Column	Syntax	OID
hwVectoringVceRunInfoCollectType The leaf is used to set the vectoring running information collection type. Options: 1. crosstalkmatrix(1) - Collect information about crosstalk matrix for vectoring lines. 2. keyrecord(2) - Collect key vecto…	Enumerationr/w Enumerated Values: -1 invalid 1 crosstalkmatrix 2 keyrecord 3 couplingmatrix 4 algorithmparameter	.1.3.6.1.4.1.2011.6.171.13.1.1
hwVectoringVceRunInfoCollectStart The leaf is used to start vectoring running information collection. Options: 1. start(1) - Start to collect vectoring running information. 2. invalid(-1) - Invalid value.	Enumerationr/w Enumerated Values: -1 invalid 1 start	.1.3.6.1.4.1.2011.6.171.13.1.2
hwVectoringVceRunInfoCollectState Indicates the status of vectoring running information collection. Options: 1. nocollect(1) - The collection does not start. 2. collecting(2) - The colleciton is running. 3. collected(3) - The collection completed.	Enumeration Enumerated Values: 1 nocollect 2 collecting 3 collected	.1.3.6.1.4.1.2011.6.171.13.1.3
hwVectoringVceRunInfoCollectTimes Indicates vectoring running information collection times. 4294967295 represents invalid value.	Unsigned32r/w Constraints: range: 1-5 range: 4294967295-4294967295	.1.3.6.1.4.1.2011.6.171.13.1.4
hwVectoringVceRunInfoCollectInterval Indicates the interval at which vectoring running information is collected. 4294967295 represents invalid value.	minuteUnsigned32r/w Constraints: range: 15-120 range: 4294967295-4294967295	.1.3.6.1.4.1.2011.6.171.13.1.5
hwVectoringVceRunInfoCollectCurrentTime Indicates the time at which vectoring running information is collected.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.171.13.1.6
hwVectoringVceRunInfoCollectAlgoParaVictimPort Indicates the ifindex of the victim port. -1 represents invalid value.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.171.13.1.7
hwVectoringVceRunInfoCollectAlgoParaDisturberLocation Indicates the connected link ID list of the device where the disturber ports locate. Options: 1. local(1) - Local device 2. peer(2) - Peer device 3. invalid(-1) - Invalid value	Enumerationr/w Enumerated Values: -1 invalid 1 local 2 peer	.1.3.6.1.4.1.2011.6.171.13.1.8
hwVectoringVceRunInfoCollectAlgoParaDisturberPort Indicates the ifindex of the disturber port. -1 represents invalid value.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.171.13.1.9
hwVectoringVceRunInfoCollectRequestId The vce run info collect request ID, which identifies a collect request delivered by the NMS. An collect request ID can be any unsigned integer in the range of 0-4294967295. However, the IDs of different collect request…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.171.13.1.10