HUAWEI-VDSL2-PRIV-MIB Table View

This table contains the VDSL SELT configuration, SELT result, SELT data. The index of this table is ifIndex.

vdsl2SeltTestEntry row .1.3.6.1.4.1.2011.6.115.1.7.1.1.1

This table contains the VDSL SELT configuration, SELT result, SELT data. The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column	Syntax	OID
vdsl2SeltTestOperType This object is used to start the VDSL SELT. Only the start of the SELT is supported current. The stop of the SELT is not supported.	VSDLSELTOPERTYPEr/w Type Values: 0 stop 1 adslstart 2 vdsl2start	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.1
vdsl2SeltTestOperResult Selt test operation result.	VSDLSELTOPERRESULT Type Values: 1 normal 2 fail 3 abort	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.2
vdsl2SeltTestResultNo Selt test result serial number.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.3
vdsl2SeltTestResultLastFlag Last package flag for test result.	VSDLSELTRESULTLASTFLAG Type Values: 0 false 1 true	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.4
vdsl2SeltTestResult Selt test result data.	OctetString Constraints: range: 0-1500	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.5
vdsl2SeltTestParamLoopLength Selt test parameter Loop Length.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.6
vdsl2SeltTestParamLoopTermin Selt test parameter Loop Termination.	VSDLSELTPARAMLOOPTERMIN Type Values: 0 open 1 short 2 unknown 3 terminated	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.7
vdsl2SeltTestParamLoopGauge Selt test parameter Loop Gauge.	VSDLSELTPARAMLOOPGAUGEr/w Type Values: 1 greater26awg 2 equal26awg 3 equal24awg 4 less24awg 5 unknownawg	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.8
vdsl2SeltTestParamUpShnCap Selt test parameter Upstream Shannon Capacity.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.9
vdsl2SeltTestParamDwnShnCap Selt test parameter Downstream Shannon Capacity.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.10
vdsl2SeltTestParamInbandNoise Selt test parameter Inband Noise 4096 values that indicate inband noise in DB/Hz, covering VDSL bands, from 0 to 30 MHz.	OctetString Constraints: range: 0-8192	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.11
vdsl2SeltTestParamTerminResp Selt test parameter Termination Response 180 values that indicate termination response magnitude from 0 to 18 kft.	OctetString Constraints: range: 0-1500	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.12
vdsl2SeltTestParamUpMgnAtRate Selt test parameter Upstream Rate vs. Margin This value is a measure of the quality of your upstream data signal relative to the noise on the line. Hundreds of values that indicate SNR margin in DB/Hz a…	OctetString Constraints: range: 0-1500	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.13
vdsl2SeltTestParamDwnMgnAtRate Selt test parameter Downstream Rate vs. Margin This value is a measure of the quality of your downstream data signal relative to the noise on the line. Hundreds of values that indicate SNR margin in DB…	OctetString Constraints: range: 0-1500	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.14
vdsl2SeltTestParamUpRateAtMgn Selt test parameter Upstream Margin vs. Rate	OctetString Constraints: range: 0-1500	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.15
vdsl2SeltTestParamDwnRateAtMgn Selt test parameter Downstream Margin vs. Rate	OctetString Constraints: range: 0-1500	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.16
hwvdsl2SeltTestParamAttnAt180KHZ Selt test parameter AttnAt180KHZ. It ranges from -950 to 0 (physical values are -95 to 0 dB). The invalid value is -1. If no SELT is performed, no SELT data is generated because the SELT is incomplete, or no SELT data…	0.1 dBSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65535
hwvdsl2SeltTestParamAttnAt300KHZ Selt test parameter AttnAt300KHZ. It ranges from -950 to 0 (physical values are -95 to 0 dB). The invalid value is -1. If no SELT is performed, no SELT data is generated because the SELT is incomplete, or no SELT data…	0.1 dBSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65536
hwvdsl2SeltTestParamQSPsdValue Selt test parameter QuietSignal PSD. An array of 4096 16-bits values, designed for supporting up to 4096 (downstream) sub-carriers. It ranges from -150 to -40 units of 1dBm/Hz.	OctetString Constraints: range: 0-8192	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65537
hwvdsl2SeltTestParamUnCalibLineScale The scale factor of uncalibrated echo response shall be coded as a 32 bit unsigned integer.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65538
hwvdsl2SeltTestParamUnCalibEchoRespRealSegment1 The uncalibrated echo response, UER(i* UER_G*Df), shall be represented in linear format by a scale factor and a normalized complex number a(i)+j*b(i), where i is a frequency index i ranging from 0 to NSC-1, the subcarri…	OctetString Constraints: range: 0-8192	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65539
hwvdsl2SeltTestParamUnCalibEchoRespRealSegment2 The uncalibrated echo response, UER(i* UER_G*Df), shall be represented in linear format by a scale factor and a normalized complex number a(i)+j*b(i), where i is a frequency index i ranging from 0 to NSC-1, the subcarri…	OctetString Constraints: range: 0-8192	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65540
hwvdsl2SeltTestParamUnCalibEchoRespImgSegment1 The uncalibrated echo response, UER(i* UER_G*Df), shall be represented in linear format by a scale factor and a normalized complex number a(i)+j*b(i), where i is a frequency index i ranging from 0 to NSC-1, the subcarri…	OctetString Constraints: range: 0-8192	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65541
hwvdsl2SeltTestParamUnCalibEchoRespImgSegment2 The uncalibrated echo response, UER(i* UER_G*Df), shall be represented in linear format by a scale factor and a normalized complex number a(i)+j*b(i), where i is a frequency index i ranging from 0 to NSC-1, the subcarri…	OctetString Constraints: range: 0-8192	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65542
hwvdsl2SeltTestParamQlnGroupSize Number of QLN(quiet line noise) per group. The scale value is 1 or 4294967295.4294967295 is invalid value.	Unsigned32 Constraints: range: 4294967295-4294967295 range: 1-1	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65548
hwvdsl2SeltTestParamQmeC The status of QLN capture switch. Options: 1. enable(1) - Enable QLN capture switch 2. disable(2) - Disable QLN capture switch 3. invalid(-1) - Invalid value	Enumerationr/w Enumerated Values: -1 invalid 1 enable 2 disable	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65549
hwvdsl2SeltTestParamUmeC The status of UER capture switch. Options: 1. enable(1) - Enable UER capture switch 2. disable(2) - Disable UER capture switch 3. invalid(-1) - Invalid value	Enumerationr/w Enumerated Values: -1 invalid 1 enable 2 disable	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65550
hwvdsl2SeltTestParaVarUerC The relative variance of the uncalibrated echo response REL_VAR_UER(i* UER_G *Df) shall be represented as an 8-bit unsigned integer v(i), where i is the subcarrier index i = 0 to NSC-1. The value of REL_VAR_UER(i* UER_G…	OctetString Constraints: range: 0-8192	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65551
hwvdsl2SeltTestParaUerMmdC This parameter is the maximum allowed time for SELT uncalibrated echo response measurement, between the time of the start command written by the SELT-PMD-ME, and the time the result is available for read operation by SE…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65552
hwvdsl2SeltTestParaQlnMmdC This parameter is the maximum allowed time for SELT quiet line noise measurement, between the time of the start command written by the SELT-PMD-ME, and the time the result is available for read operation by SELT-PMD-ME.…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65553
hwvdsl2SeltTestParaUerStatus UerStatus. Options: 1.off(1) - The status is off. 2.running(2) - The status is running. 3.completed(3) - The status is completed. 4.failed(4) - The status is failed.	Enumeration Enumerated Values: 1 off 2 running 3 completed 4 failed	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65554
hwvdsl2SeltTestParaQlnStatus QlnStatus. Options: 1.off(1) - The status is off. 2.running(2) - The status is running. 3.completed(3) - The status is completed. 4.failed(4) - The status is failed.	Enumeration Enumerated Values: 1 off 2 running 3 completed 4 failed	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65555
hwvdsl2SeltTestParamCalcEnable The status of calculation switch. Options: 1. enable(1) - Enable calculation switch 2. disable(2) - Disable calculation switch 3. invalid(-1) - Invalid value Default: enable(1)	Enumerationr/w Enumerated Values: -1 invalid 1 enable 2 disable	.1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65556

This table supports the configuration of vdsl selt level.
The indexes of this table are hwFrameIndex and hwSlotIndex.

vdsl2SeltTestLevelEntry row .1.3.6.1.4.1.2011.6.115.1.7.1.2.1

This table supports the configuration of vdsl selt level.
The indexes of this entry are hwFrameIndex and hwSlotIndex.

Indexes

HUAWEI-DEVICE-MIBhwFrameIndex HUAWEI-DEVICE-MIBhwSlotIndex

Column	Syntax	OID
hwvdsl2SeltLevel The level of vdsl SELT: 1 Level0; 2 Level1; 3 Level2; 4 Level3. A special value of -1 indicates the level of vdsl SELT is invalid.	Integer32r/w Constraints: range: 1-4 range: -1--1	.1.3.6.1.4.1.2011.6.115.1.7.1.2.1.1

This table describes calibration data of selt test.
The index of this table is ifIndex.

vdsl2SeltCalibrationEntry row .1.3.6.1.4.1.2011.6.115.1.7.1.3.1

This table describes calibration data of selt test.
The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column	Syntax	OID
vdsl2SeltCalibrationInvVendorId It consists of 8 binary octets, including a provider code.	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.2011.6.115.1.7.1.3.1.1
vdsl2SeltCalibrationDataSegment1 The part 1 of selt calibration data. The unit of selt calibration data is 0.00001.	OctetString Constraints: range: 0-8192	.1.3.6.1.4.1.2011.6.115.1.7.1.3.1.2
vdsl2SeltCalibrationDataSegment2 The part 2 of selt calibration data. The unit of selt calibration data is 0.00001.	OctetString Constraints: range: 0-8192	.1.3.6.1.4.1.2011.6.115.1.7.1.3.1.3