HUAWEI-VBST-MIB

        Please provide the descritpion.

Imported Objects

entPhysicalNameENTITY-MIB
hwDatacommHUAWEI-MIB
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUPSNMPv2-CONF
Integer32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPESNMPv2-SMI

Objects

hwVbstMIB .1.3.6.1.4.1.2011.5.25.323
hwVbstObjects .1.3.6.1.4.1.2011.5.25.323.1
hwVbstMaxTrunkNum .1.3.6.1.4.1.2011.5.25.323.1.1
hwVbstMaxPVNum .1.3.6.1.4.1.2011.5.25.323.1.2
hwVbstMaxVlanNum .1.3.6.1.4.1.2011.5.25.323.1.3
hwVbstVlanNum .1.3.6.1.4.1.2011.5.25.323.1.4
hwVbstTrapPort .1.3.6.1.4.1.2011.5.25.323.1.5
hwVbstTrapVlan .1.3.6.1.4.1.2011.5.25.323.1.6
hwVbstMaxTrunkPVNum .1.3.6.1.4.1.2011.5.25.323.1.7
hwVbstConflictDescription .1.3.6.1.4.1.2011.5.25.323.1.8
hwVbstNotifications .1.3.6.1.4.1.2011.5.25.323.2
hwVbstConformance .1.3.6.1.4.1.2011.5.25.323.3
hwVbstGroups .1.3.6.1.4.1.2011.5.25.323.3.1
hwVbstCompliances .1.3.6.1.4.1.2011.5.25.323.3.2

Notifications/Traps

NameOIDDescription
hwVbstTrunkNumExceeded

.1.3.6.1.4.1.2011.5.25.323.2.1
Trap message is generated by VBST node when 
it detects that number of trunk ports has exceeded the specification limit.
hwVbstRspanCfgConflict

.1.3.6.1.4.1.2011.5.25.323.2.10
In VBST mode, the Eth-Trunk configuration conflicts with the remote observing port configuration.
hwVbstTrunkNumResumed

.1.3.6.1.4.1.2011.5.25.323.2.2
Trap message is generated by VBST node when 
it detects that the number of trunk ports has resumed below 95% of the specification limit.
hwVbstPVNumExceeded


.1.3.6.1.4.1.2011.5.25.323.2.3
Trap message is generated by VBST node when 
it detects that the number of PortVlan has exceeded the specification limit.
hwVbstPVNumResumed


.1.3.6.1.4.1.2011.5.25.323.2.4
Trap message is generated by VBST node when 
it detects that the number of PortVlan has resumed below 95% of the specification limit.
hwVbstVlanNumExceeded

.1.3.6.1.4.1.2011.5.25.323.2.5
Trap message is generated by VBST node when 
it detects that the number of VLANs running VBST has exceeded the specification limit.
hwVbstVlanNumResumed

.1.3.6.1.4.1.2011.5.25.323.2.6
Trap message is generated by VBST node when 
it detects that the number of VLANs running VBST has resumed below 95% of the specification limit.
hwVbstInvalidPV



.1.3.6.1.4.1.2011.5.25.323.2.7
Trap message is generated by VBST node when 
it detects that the number of VLANs that cannot be calculated in the VBST packets received by interface exceeds the threshold.
hwVbstTrunkPVNumExceeded

.1.3.6.1.4.1.2011.5.25.323.2.8
Trap message is generated by VBST node when 
it detects that the number of VLANs on all Eth-Trunks exceeds the limit of VBST.
hwVbstTrunkPVNumResumed

.1.3.6.1.4.1.2011.5.25.323.2.9
Trap message is generated by VBST node when 
it detects the number of VLANs on all Eth-Trunks falls below the limit of VBST.