HUAWEI-TUNNEL-TE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
10
Rows
10
Columns
120

hwTunnelDiffServTable

table
.1.3.6.1.4.1.2011.5.25.151.1.1 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwTunnelDiffServTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-TUNNEL-TE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-TUNNEL-TE-MIB::hwTunnelDiffServTable' 
The table describes the different service mode of tunnel.
hwTunnelDiffServEntry row .1.3.6.1.4.1.2011.5.25.151.1.1.1
Interface different service mode attribute configuration.
Indexes
Column Syntax OID
hwTunnelDiffServIndex
Uniquely identifies a set of tunnel instances
between a pair of ingress and egress LSRs.
Managers should obtain new values for row
creation in this table by reading mplsTunnelIndexNext.
When the MPLS signalling protoco…
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.151.1.1.1.1
hwTunnelDiffServMode
Different service mode of TE interface, default is uniform.
Enumeration
Enumerated Values:
1pipe
2uniform
 .1.3.6.1.4.1.2011.5.25.151.1.1.1.2
hwTunnelDiffServServiceClass
PHB in the ingress PE, the value must be
be,af1,af2,af3,af4,ef,cs6,cs7.The default class is invalidClass(255).
Enumeration
Enumerated Values:
1be
2af1
3af2
4af3
5af4
6ef
7cs6
8cs7
255invalidClass
 .1.3.6.1.4.1.2011.5.25.151.1.1.1.3
hwTunnelDiffServColor
Remarked color of packet in the ingress
PE, the value must be green,yellow,red.The default color is invalidColor(255).
Enumeration
Enumerated Values:
1green
2yellow
3red
255invalidColor
 .1.3.6.1.4.1.2011.5.25.151.1.1.1.4
hwTunnelTeFlowQueue
Name of flow-queue template.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2011.5.25.151.1.1.1.5

hwTunnelTeVsiTable

table obsolete
.1.3.6.1.4.1.2011.5.25.151.1.2 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwTunnelTeVsiTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-TUNNEL-TE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-TUNNEL-TE-MIB::hwTunnelTeVsiTable' 
The table describes the VPN binding of Tunnel.
hwTunnelTeVsiEntry row .1.3.6.1.4.1.2011.5.25.151.1.2.1
The L2VPN VSI binding configuration of tunnel interface.
Indexes
Column Syntax OID
hwTunnelTeVsiIndexobsolete
Uniquely identifies a set of tunnel instances
between a pair of ingress and egress LSRs.
Managers should obtain new values for row
creation in this table by reading mplsTunnelIndexNext.
When the MPLS signalling protoco…
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.151.1.2.1.1
hwTunnelTeVsiNameobsolete
The name of VSI that the TE interface bind.
OctetString
Constraints:
range: 0-47
 .1.3.6.1.4.1.2011.5.25.151.1.2.1.2
hwTunnelTeVsiCirobsolete
The Committed Information Rate of the VSI.
Integer32
Constraints:
range: 100-10000000
 .1.3.6.1.4.1.2011.5.25.151.1.2.1.3
hwTunnelTeVsiPirobsolete
The Peak Information Rate of the VSI.
Integer32
Constraints:
range: 100-10000000
 .1.3.6.1.4.1.2011.5.25.151.1.2.1.4
hwTunnelTeVsiFlowQueueobsolete
Name of flow-queue template.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2011.5.25.151.1.2.1.5

hwTunnelTeVllTable

table obsolete
.1.3.6.1.4.1.2011.5.25.151.1.3 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwTunnelTeVllTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-TUNNEL-TE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-TUNNEL-TE-MIB::hwTunnelTeVllTable' 
The table describes the VLL binding of tunnel.
hwTunnelTeVllEntry row .1.3.6.1.4.1.2011.5.25.151.1.3.1
The VLL binding configuration of tunnel interface.
Indexes
Column Syntax OID
hwTunnelTeVllIndexobsolete
Uniquely identifies a set of tunnel instances
between a pair of ingress and egress LSRs.
Managers should obtain new values for row
creation in this table by reading mplsTunnelIndexNext.
When the MPLS signalling protoco…
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.151.1.3.1.1
hwTunnelTeVllInterfaceNameobsolete
The interface name of VLL binding.
OctetString
Constraints:
range: 0-47
 .1.3.6.1.4.1.2011.5.25.151.1.3.1.2
hwTunnelTeVllCirobsolete
The Committed Information Rate of the VLL.
Integer32
Constraints:
range: 100-10000000
 .1.3.6.1.4.1.2011.5.25.151.1.3.1.3
hwTunnelTeVllPirobsolete
The Peak Information Rate of the VLL.
Integer32
Constraints:
range: 100-10000000
 .1.3.6.1.4.1.2011.5.25.151.1.3.1.4
hwTunnelTeVllFlowQueueobsolete
Name of flow-queue template.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2011.5.25.151.1.3.1.5

hwTunnelTeL3vpnTable

table obsolete
.1.3.6.1.4.1.2011.5.25.151.1.4 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwTunnelTeL3vpnTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-TUNNEL-TE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-TUNNEL-TE-MIB::hwTunnelTeL3vpnTable' 
The table describes the L3VPN binding of tunnel.
hwTunnelTeL3vpnEntry row .1.3.6.1.4.1.2011.5.25.151.1.4.1
The L3VPN binding configuration of tunnel interface.
Indexes
Column Syntax OID
hwTunnelTeL3vpnIndexobsolete
Uniquely identifies a set of tunnel instances
between a pair of ingress and egress LSRs.
Managers should obtain new values for row
creation in this table by reading mplsTunnelIndexNext.
When the MPLS signalling protoco…
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.151.1.4.1.1
hwTunnelTeL3vpnNameobsolete
The name of VPN instance that the TE interface bind.
OctetString
Constraints:
range: 0-47
 .1.3.6.1.4.1.2011.5.25.151.1.4.1.2
hwTunnelTeL3vpnCirobsolete
The Committed Information Rate of the L3VPN.
Integer32
Constraints:
range: 100-10000000
 .1.3.6.1.4.1.2011.5.25.151.1.4.1.3
hwTunnelTeL3vpnPirobsolete
The Peak Information Rate of the L3VPN.
Integer32
Constraints:
range: 100-10000000
 .1.3.6.1.4.1.2011.5.25.151.1.4.1.4
hwTunnelTeL3vpnFlowQueueobsolete
Name of flow-queue template.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2011.5.25.151.1.4.1.5

hwTunnelTeStatisticsTable

table
.1.3.6.1.4.1.2011.5.25.151.1.5 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwTunnelTeStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-TUNNEL-TE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-TUNNEL-TE-MIB::hwTunnelTeStatisticsTable' 
The table describes the up/down state transition counts of the TE tunnel interface. 
It also describes timestamps when an interface is hot swapped and a primary/backup tunnel switchover is performed.
hwTunnelTeStatisticsEntry row .1.3.6.1.4.1.2011.5.25.151.1.5.1
The up/down state transition counts of TE tunnel interface.
The index of the table is hwTunnelTeStatisticsIfIndex.
Indexes
Column Syntax OID
hwTunnelTeStatisticsIfIndex
This object identifies the index of a TE tunnel.
The value is an unsigned 32-bit integer.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.151.1.5.1.1
hwTunnelTeUpDownStatistics
Describes the up/down transition counts of the TE tunnel interface.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.151.1.5.1.2
hwTunnTeCounterDiscontinuityTime
The value of sysUpTime on the most recent occasion at which this interface's up/down transition counters suffered a discontinuity.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.2011.5.25.151.1.5.1.3

hwCtTemplateTable

table
.1.3.6.1.4.1.2011.5.25.151.1.6 · 1 row entry · 12 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwCtTemplateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-TUNNEL-TE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-TUNNEL-TE-MIB::hwCtTemplateTable' 
The table describes the CT template configuration on the device.
hwCtTemplateEntry row .1.3.6.1.4.1.2011.5.25.151.1.6.1
The CT template configuration on the device.
The index of the table is hwCtTemplateIndex.
Indexes
Column Syntax OID
hwCtTemplateIndex
It uniquely identifies a set of CT templates.
Managers should obtain new values for row
creation in this table by reading hwCtTemplateIndex.
Integer32
Constraints:
range: 1-4096
 .1.3.6.1.4.1.2011.5.25.151.1.6.1.1
hwCtTemplateName
The CT template name.
OctetStringr/w
Constraints:
range: 1-19
 .1.3.6.1.4.1.2011.5.25.151.1.6.1.2
hwCtTemplateCt0
The CT0 bandwidth of the CT template.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.151.1.6.1.3
hwCtTemplateCt1
The CT1 bandwidth of the CT template.
Unsigned32r/w
Constraints:
range: 0-32000000
 .1.3.6.1.4.1.2011.5.25.151.1.6.1.4
hwCtTemplateCt2
The CT2 bandwidth of the CT template.
Unsigned32r/w
Constraints:
range: 0-32000000
 .1.3.6.1.4.1.2011.5.25.151.1.6.1.5
hwCtTemplateCt3
The CT3 bandwidth of the CT template.
Unsigned32r/w
Constraints:
range: 0-32000000
 .1.3.6.1.4.1.2011.5.25.151.1.6.1.6
hwCtTemplateCt4
The CT4 bandwidth of the CT template.
Unsigned32r/w
Constraints:
range: 0-32000000
 .1.3.6.1.4.1.2011.5.25.151.1.6.1.7
hwCtTemplateCt5
The CT5 bandwidth of the CT template.
Unsigned32r/w
Constraints:
range: 0-32000000
 .1.3.6.1.4.1.2011.5.25.151.1.6.1.8
hwCtTemplateCt6
The CT6 bandwidth of the CT template.
Unsigned32r/w
Constraints:
range: 0-32000000
 .1.3.6.1.4.1.2011.5.25.151.1.6.1.9
hwCtTemplateCt7
The CT7 bandwidth of the CT template.
Unsigned32r/w
Constraints:
range: 0-32000000
 .1.3.6.1.4.1.2011.5.25.151.1.6.1.10
hwCtTemplateCommit
The commit flag of the CT template,1 indicates commit,0 indicates not commit.
Enumerationr/w
Enumerated Values:
1notCommit
2commit
 .1.3.6.1.4.1.2011.5.25.151.1.6.1.11
hwCtTemplateRowStatus
This object is used to create and delete rows in the CT template.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.151.1.6.1.12

hwCtConfigTunnelCtTable

table
.1.3.6.1.4.1.2011.5.25.151.1.7 · 1 row entry · 12 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwCtConfigTunnelCtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-TUNNEL-TE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-TUNNEL-TE-MIB::hwCtConfigTunnelCtTable' 
The table describes the CT configuration in the TE tunnel interface.
hwCtConfigTunnelCtEntry row .1.3.6.1.4.1.2011.5.25.151.1.7.1
The table describes the CT configuration in the TE tunnel interface.
The index of the table is hwCtConfigTunnelCtIfIndex.
Indexes
Column Syntax OID
hwCtConfigTunnelCtIfIndex
Uniquely identifies a set of tunnels
between a pair of ingress and egress LSRs.
Managers should obtain new values for row
creation in this table by reading mplsTunnelIndexNext.
When the MPLS signalling protocol is rsvp…
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.151.1.7.1.1
hwCtConfigTunnelName
The name of the TE tunnel interface.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.5.25.151.1.7.1.2
hwCtConfigTunnelCommit
The commit flag of the TE tunnel interface,1 indicates commit,0 indicates not commit.
Enumeration
Enumerated Values:
1notCommit
2commit
 .1.3.6.1.4.1.2011.5.25.151.1.7.1.3
hwCtConfigTemplateName
The CT template name.
OctetString
Constraints:
range: 1-19
 .1.3.6.1.4.1.2011.5.25.151.1.7.1.4
hwCtConfigTunnelCt0Band
The CT0 bandwidth value of the TE tunnel interface.
Unsigned32
Constraints:
range: 0-32000000
 .1.3.6.1.4.1.2011.5.25.151.1.7.1.5
hwCtConfigTunnelCt1Band
The CT1 bandwidth value of the TE tunnel interface.
Unsigned32
Constraints:
range: 0-32000000
 .1.3.6.1.4.1.2011.5.25.151.1.7.1.6
hwCtConfigTunnelCt2Band
The CT2 bandwidth value of the TE tunnel interface.
Unsigned32
Constraints:
range: 0-32000000
 .1.3.6.1.4.1.2011.5.25.151.1.7.1.7
hwCtConfigTunnelCt3Band
The CT3 bandwidth value of the TE tunnel interface.
Unsigned32
Constraints:
range: 0-32000000
 .1.3.6.1.4.1.2011.5.25.151.1.7.1.8
hwCtConfigTunnelCt4Band
The CT4 bandwidth value of the TE tunnel interface.
Unsigned32
Constraints:
range: 0-32000000
 .1.3.6.1.4.1.2011.5.25.151.1.7.1.9
hwCtConfigTunnelCt5Band
The CT5 bandwidth value of the TE tunnel interface.
Unsigned32
Constraints:
range: 0-32000000
 .1.3.6.1.4.1.2011.5.25.151.1.7.1.10
hwCtConfigTunnelCt6Band
The CT6 bandwidth value of the TE tunnel interface.
Unsigned32
Constraints:
range: 0-32000000
 .1.3.6.1.4.1.2011.5.25.151.1.7.1.11
hwCtConfigTunnelCt7Band
The CT7 bandwidth value of the TE tunnel interface.
Unsigned32
Constraints:
range: 0-32000000
 .1.3.6.1.4.1.2011.5.25.151.1.7.1.12

hwCtStatisticsTable

table
.1.3.6.1.4.1.2011.5.25.151.1.8 · 1 row entry · 42 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwCtStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-TUNNEL-TE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-TUNNEL-TE-MIB::hwCtStatisticsTable' 
The table describes flow statistics of the TE tunnel interface VPN configuration.
hwCtStatisticsEntry row .1.3.6.1.4.1.2011.5.25.151.1.8.1
The table describes the statistics in the TE tunnel interface with CT configuration.
The index of the table is hwCtStatisticsIfIndex.
Indexes
Column Syntax OID
hwCtStatisticsIfIndex
Uniquely identifies a set of tunnels
between a pair of ingress and egress LSRs.
Managers should obtain new values for row
creation in this table by reading mplsTunnelIndexNext.
When the MPLS signalling protocol is rsvp…
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.1
hwCtStatisticsTunnelName
The name of the TE tunnel interface.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.2
hwCtStatisticsCt0OutByteRate
It counts the rate in bytes/sec out from the CT0 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.3
hwCtStatisticsCt0OutPktRate
It counts the rate in packets/sec out from the CT0 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.4
hwCtStatisticsCt0OutPkt
It counts the out packets from the CT0 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.5
hwCtStatisticsCt0OutPktByte
It counts the out bytes from the CT0 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.6
hwCtStatisticsCt0OutErrorPkt
It counts the error packets from the CT0 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.7
hwCtStatisticsCt1OutByteRate
It counts the rate in bytes/sec out from CT1 the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.8
hwCtStatisticsCt1OutPktRate
It counts the rate in packets/sec out from the CT0 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.9
hwCtStatisticsCt1OutPkt
It counts the out packets from the CT1 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.10
hwCtStatisticsCt1OutPktByte
It counts the out packet bytes from the CT1 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.11
hwCtStatisticsCt1OutErrorPkt
It counts the error packets from the CT1 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.12
hwCtStatisticsCt2OutByteRate
It counts the rate in bytes/sec out from the CT2 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.13
hwCtStatisticsCt2OutPktRate
It counts the rate in packets/sec out from the CT2 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.14
hwCtStatisticsCt2OutPkt
It counts the out packets from the CT2 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.15
hwCtStatisticsCt2OutPktByte
It counts the out packet bytes from the CT2 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.16
hwCtStatisticsCt2OutErrorPkt
It counts the error packets from the CT2 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.17
hwCtStatisticsCt3OutByteRate
The CT3 out in bytes/sec out of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.18
hwCtStatisticsCt3OutPktRate
It counts the rate in packets/sec out from the CT0 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.19
hwCtStatisticsCt3OutPkt
It counts the out packets from the CT3 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.20
hwCtStatisticsCt3OutPktByte
It counts the out packet bytes from the CT3 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.21
hwCtStatisticsCt3OutErrorPkt
It counts the error packets from the CT0 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.22
hwCtStatisticsCt4OutByteRate
The CT4 out in bytes/sec out of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.23
hwCtStatisticsCt4OutPktRate
It counts the rate in packets/sec out from the CT4 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.24
hwCtStatisticsCt4OutPkt
It counts the out packets from the CT4 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.25
hwCtStatisticsCt4OutPktByte
It counts the out packet bytes from the CT4 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.26
hwCtStatisticsCt4OutErrorPkt
It counts the error packets from the CT4 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.27
hwCtStatisticsCt5OutByteRate
The CT5 out in bytes/sec out of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.28
hwCtStatisticsCt5OutPktRate
It counts the rate in packets/sec out from the CT5 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.29
hwCtStatisticsCt5OutPkt
It counts the out packets from the CT5 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.30
hwCtStatisticsCt5OutPktByte
It counts the out packet bytes from the CT5 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.31
hwCtStatisticsCt5OutErrorPkt
It counts the error packets from the CT5 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.32
hwCtStatisticsCt6OutByteRate
The CT6 out in bytes/sec out of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.33
hwCtStatisticsCt6OutPktRate
It counts the rate in packets/sec out from the CT6 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.34
hwCtStatisticsCt6OutPkt
It counts the out packets from the CT6 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.35
hwCtStatisticsCt6OutPktByte
It counts the out packet bytes from the CT6 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.36
hwCtStatisticsCt6OutErrorPkt
It counts the error packets from the CT6 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.37
hwCtStatisticsCt7OutByteRate
The CT7 out in bytes/sec out of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.38
hwCtStatisticsCt7OutPktRate
It counts the rate in packets/sec out from the CT7 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.39
hwCtStatisticsCt7OutPkt
It counts the out packets from the CT7 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.40
hwCtStatisticsCt7OutPktByte
It counts the out packet bytes from the CT7 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.41
hwCtStatisticsCt7OutErrorPkt
It counts the error packets from the CT7 of the TE tunnel interface with VPN configuration.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.151.1.8.1.42

hwCtFlowTemplateTable

table
.1.3.6.1.4.1.2011.5.25.151.1.9 · 1 row entry · 28 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwCtFlowTemplateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-TUNNEL-TE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-TUNNEL-TE-MIB::hwCtFlowTemplateTable' 
The table describes max 8 of the CT-FLOW-Mapping template configuration on the device.
hwCtFlowTemplateEntry row .1.3.6.1.4.1.2011.5.25.151.1.9.1
The table describes the CT-FLOW-Mapping template configuration on the device.
Indexes
Column Syntax OID
hwCtFlowTemplateID
The index of CT-FLOW templat.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.2011.5.25.151.1.9.1.1
hwCtFlowTemplateName
The name of CT-FLOW template.
OctetStringr/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.2011.5.25.151.1.9.1.11
hwCt0Cos
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.
Enumerationr/w
Enumerated Values:
1be
2af1
3af2
4af3
5af4
6ef
7cs6
8cs7
 .1.3.6.1.4.1.2011.5.25.151.1.9.1.12
hwCt0Scheduler
Scheduler name.
Enumerationr/w
Enumerated Values:
1pq
2wfq
3lpq
 .1.3.6.1.4.1.2011.5.25.151.1.9.1.13
hwCt0Valid
The state of CT-FLOW templat row.
Enumerationr/w
Enumerated Values:
1valid
2invalid
 .1.3.6.1.4.1.2011.5.25.151.1.9.1.14
hwCt1Cos
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.
Enumerationr/w
Enumerated Values:
1be
2af1
3af2
4af3
5af4
6ef
7cs6
8cs7
 .1.3.6.1.4.1.2011.5.25.151.1.9.1.15
hwCt1Scheduler
Scheduler name.
Enumerationr/w
Enumerated Values:
1pq
2wfq
3lpq
 .1.3.6.1.4.1.2011.5.25.151.1.9.1.16
hwCt1Valid
The state of CT-FLOW templat row.
Enumerationr/w
Enumerated Values:
1valid
2invalid
 .1.3.6.1.4.1.2011.5.25.151.1.9.1.17
hwCt2Cos
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.
Enumerationr/w
Enumerated Values:
1be
2af1
3af2
4af3
5af4
6ef
7cs6
8cs7
 .1.3.6.1.4.1.2011.5.25.151.1.9.1.18
hwCt2Scheduler
Scheduler name.
Enumerationr/w
Enumerated Values:
1pq
2wfq
3lpq
 .1.3.6.1.4.1.2011.5.25.151.1.9.1.19
hwCt2Valid
The state of CT-FLOW templat row.
Enumerationr/w
Enumerated Values:
1valid
2invalid
 .1.3.6.1.4.1.2011.5.25.151.1.9.1.20
hwCt3Cos
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.
Enumerationr/w
Enumerated Values:
1be
2af1
3af2
4af3
5af4
6ef
7cs6
8cs7
 .1.3.6.1.4.1.2011.5.25.151.1.9.1.21
hwCt3Scheduler
Scheduler name.
Enumerationr/w
Enumerated Values:
1pq
2wfq
3lpq
 .1.3.6.1.4.1.2011.5.25.151.1.9.1.22
hwCt3Valid
The state of CT-FLOW templat row.
Enumerationr/w
Enumerated Values:
1valid
2invalid
 .1.3.6.1.4.1.2011.5.25.151.1.9.1.23
hwCt4Cos
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.
Enumerationr/w
Enumerated Values:
1be
2af1
3af2
4af3
5af4
6ef
7cs6
8cs7
 .1.3.6.1.4.1.2011.5.25.151.1.9.1.24
hwCt4Scheduler
Scheduler name.
Enumerationr/w
Enumerated Values:
1pq
2wfq
3lpq
 .1.3.6.1.4.1.2011.5.25.151.1.9.1.25
hwCt4Valid
The state of CT-FLOW templat row.
Enumerationr/w
Enumerated Values:
1valid
2invalid
 .1.3.6.1.4.1.2011.5.25.151.1.9.1.26
hwCt5Cos
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.
Enumerationr/w
Enumerated Values:
1be
2af1
3af2
4af3
5af4
6ef
7cs6
8cs7
 .1.3.6.1.4.1.2011.5.25.151.1.9.1.27
hwCt5Scheduler
Scheduler name.
Enumerationr/w
Enumerated Values:
1pq
2wfq
3lpq
 .1.3.6.1.4.1.2011.5.25.151.1.9.1.28
hwCt5Valid
The state of CT-FLOW templat row.
Enumerationr/w
Enumerated Values:
1valid
2invalid
 .1.3.6.1.4.1.2011.5.25.151.1.9.1.29
hwCt6Cos
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.
Enumerationr/w
Enumerated Values:
1be
2af1
3af2
4af3
5af4
6ef
7cs6
8cs7
 .1.3.6.1.4.1.2011.5.25.151.1.9.1.30
hwCt6Scheduler
Scheduler name.
Enumerationr/w
Enumerated Values:
1pq
2wfq
3lpq
 .1.3.6.1.4.1.2011.5.25.151.1.9.1.31
hwCt6Valid
The state of CT-FLOW templat row.
Enumerationr/w
Enumerated Values:
1valid
2invalid
 .1.3.6.1.4.1.2011.5.25.151.1.9.1.32
hwCt7Cos
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.
Enumerationr/w
Enumerated Values:
1be
2af1
3af2
4af3
5af4
6ef
7cs6
8cs7
 .1.3.6.1.4.1.2011.5.25.151.1.9.1.33
hwCt7Scheduler
Scheduler name.
Enumerationr/w
Enumerated Values:
1pq
2wfq
3lpq
 .1.3.6.1.4.1.2011.5.25.151.1.9.1.34
hwCt7Valid
The state of CT-FLOW templat row.
Enumerationr/w
Enumerated Values:
1valid
2invalid
 .1.3.6.1.4.1.2011.5.25.151.1.9.1.35
hwCtFlowTemplateCommit
The state of CT-FLOW templat commit.
Enumerationr/w
Enumerated Values:
1commit
2nocommit
 .1.3.6.1.4.1.2011.5.25.151.1.9.1.36
hwCtFlowTemplateRowStatus
The state of CT-FLOW templat.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.151.1.9.1.51

hwDsteInterfaceCfgTable

table
.1.3.6.1.4.1.2011.5.25.151.1.10 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwDsteInterfaceCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-TUNNEL-TE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-TUNNEL-TE-MIB::hwDsteInterfaceCfgTable' 
The DS-TE configuration at interface.
hwDsteInterfaceCfgEntry row .1.3.6.1.4.1.2011.5.25.151.1.10.1
The DS-TE configuration at interface.
Indexes
Column Syntax OID
hwDsteIfIndex
A unique value, greater than zero, for eachinterface.
It is recommended that values are assigned contiguously starting from 1.
The value for each interface sub-layer must remain constant at least from one re-initializ…
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.151.1.10.1.1
hwAppliedCtFlowTemplateName
The name of CT-FLOW template.
OctetStringr/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.2011.5.25.151.1.10.1.11
hwCtBandWidthShareCfg
The Value of Ct BandWidth configuration for DS-TE.
That must be in 'Share,UnShare'.
Enumerationr/w
Enumerated Values:
1share
2unshare
 .1.3.6.1.4.1.2011.5.25.151.1.10.1.12