HUAWEI-TDMCPE-MIB Table View

This table describes the reference information about 
a TDM modem tftp status. This information describe 
the TFTP server IP address, the file name, the TFTP 
command and TFTP status.The index of this table is ifIndex.

hwTdmTftpEntry row .1.3.6.1.4.1.2011.5.30.1.1.1.1

This table describes the reference information about
a TDM modem tftp status. This information describe
the TFTP server IP address, the file name, the TFTP
command and TFTP status.The index of this entry is ifIndex.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
hwTdmTftpFileServerIP This attribute indicates the TFTP server to update the modem software.This must be set before start the software download!	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.30.1.1.1.1.1
hwTdmTftpFileName This attribute indicates the name of the file to be sent to the modem. This must be set before start the software download!	OctetStringr/w Constraints: range: 1-14	.1.3.6.1.4.1.2011.5.30.1.1.1.1.2
hwTdmTftpFileTransCmd The command to be executed on hwTdmTftpFileName at hwTdmTftpFileServerIP. Options: 1. noOp(1) - Indicates that no operation. 2. downloadSW(2) - Indicates that down load softwire. 3. uploadConf(3) - Indicates that uplo…	Enumerationr/w Enumerated Values: 1 noOp 2 downloadSW 3 uploadConf 4 downloadConf 5 stop	.1.3.6.1.4.1.2011.5.30.1.1.1.1.3
hwTdmTftpStatus Status of tftp session. When a session ended with success, the tftpStatus should be endedOk(6). Before restarting a tftp session, the modem should set the tftpStatus to noOp(2). Options: 1. noOp(1) - Indicates that no …	Enumeration Enumerated Values: 1 noOp 2 connecting 3 transferringData 4 timeOut 5 endedOk 6 error	.1.3.6.1.4.1.2011.5.30.1.1.1.1.4

This table describes the reference information about a 
TDM modem system information. This information describe 
the maximum rate, the PSD type, the interface type of the 
DTE port, the modem wiring, the actual ASMi52 type, the 
modem hardware version, the modem software version, IP 
address and MAC address.The index of this table is ifIndex.

hwTdmModemInfoEntry row .1.3.6.1.4.1.2011.5.30.1.2.1.1

This table describes the reference information about a
TDM modem system information. This information describe
the maximum rate, the PSD type, the interface type of the
DTE port, the modem wiring, the actual ASMi52 t…

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
hwTdmModemInfoDteIfType This object indicates the interface type of the DTE port. Options: 1. x21(0) - Indicates that the interface type of the DTE port is x21. 2. v35(1) - Indicates that the interface type of the DTE port is v35. 3. v24(2) -…	Enumeration Enumerated Values: 0 x21 1 v35 2 v24 3 rs530 5 irETHQN 6 g703r64k 7 irHSSI 8 g704 28 irT1 29 g703 255 other	.1.3.6.1.4.1.2011.5.30.1.2.1.1.2
hwTdmModemInfoWireMode This object indicates the modem wiring. Options: 1. twoWire(1) - Indicates that the modem wiring is twoWire. 2. fourWire(2) - Indicates that the modem wiring is fourWire. 3. notApplicable(255) - Indicates that the mode…	Enumeration Enumerated Values: 1 twoWire 2 fourWire 255 notApplicable	.1.3.6.1.4.1.2011.5.30.1.2.1.1.3
hwTdmModemInfoModemType This object indicates the actual ASMi52 type. Options: 1. none(0) - Indicates that the actual ASMi52 type is none. 2. cardData(1) - Indicates that the actual ASMi52 type is cardData. 3. cardE1T1(2) - Indicates that the…	Enumeration Enumerated Values: 0 none 1 cardData 2 cardE1T1 3 cardDataE1 4 cardEthernet 5 cardDataEthernet 6 cardE1T1Ethernet 7 cardDataE1T1Ethernet 9 cardDataEthm 10 cardE1T1Ethm 11 cardDataE1Ethm 12 cardEthernetEthm 13 cardDataEthernetEthm 14 cardE1T1EthernetEthm 15 cardDataE1T1EthernetEthm	.1.3.6.1.4.1.2011.5.30.1.2.1.1.4
hwTdmModemInfoHwVer This object indicates the display string of the modem hardware version.	OctetString Constraints: range: 10-10	.1.3.6.1.4.1.2011.5.30.1.2.1.1.5
hwTdmModemInfoSwVer Display String of the modem software version. Examples: 2.23A8 3.4	OctetString Constraints: range: 10-10	.1.3.6.1.4.1.2011.5.30.1.2.1.1.6
hwTdmModemSupportEOC This object indicates whether the port supports the EOC or not. Options: 1. yes(1) - Indicates that the port supports the EOC. 2. no(2) - Indicates that the port does not support the EOC.	Enumeration Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.2011.5.30.1.2.1.1.7
hwTdmModemLowerSpeedOper This object indicates whether the modem run in lower speed or not. When you download file with V35 MODEM , it must be yes.If it is not, you can change it by reseting to factory or default configuration. …	Enumeration Enumerated Values: 1 yes 2 no 3 na	.1.3.6.1.4.1.2011.5.30.1.2.1.1.8
hwTdmModemDtePortState This object indicates the down port state. Options: 1. connect(1) - Indicates that the down port connected. 2. disconnect(2) - Indicates that the down port disconnected.	Enumeration Enumerated Values: 1 connect 2 disconnect	.1.3.6.1.4.1.2011.5.30.1.2.1.1.9
hwTdmModemE1PortState This object indicates the down port state. Options: 1. connect(1) - Indicates that the down port connected. 2. disconnect(2) - Indicates that the down port disconnected.	Enumeration Enumerated Values: 1 connect 2 disconnect	.1.3.6.1.4.1.2011.5.30.1.2.1.1.10

This table describes the reference information about a TDM 
Modem configuration that may be used with G.SHDSL modem for 
configuration. This information describe the alarm report 
mask, the port status report mask, the reset command, the 
switch to clear the alarm buffer, the switch to clear 
statistics of the selected port, test time out and test command.
The index of this table is ifIndex.

hwTdmModemConfEntry row .1.3.6.1.4.1.2011.5.30.1.2.2.1

This table describes the reference information about a TDM
Modem configuration that may be used with G.SHDSL modem for
configuration. This information describe the alarm report
mask, the port status report mask, the …

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
hwTdmModemConfAlarmAndPortMaskobsolete This value identifies the alarm and port status report mask of the TDM remote modem in the far-end side. Options: 1. majorAlarmMask(1) - Indicates that mask is majorAlarmMask. 2. minorAlarmMask(2) - Indicates that …	Enumerationr/w Enumerated Values: 1 majorAlarmMask 2 minorAlarmMask 3 portMask 4 majorAndMinorMask 5 majorAndPortMask 6 minorAndPortMask 7 allMask 8 noMask	.1.3.6.1.4.1.2011.5.30.1.2.2.1.1
hwTdmModemConfReset This value identifies the reset command of the TDM remote modem in the far-end side. Changing this value can reset the device or the line, or set the configuration to factory setting. reset_config_wo_mng :set all para…	Enumerationr/w Enumerated Values: 2 off 3 resetToFactory 4 deviceReset 5 lineReset 6 resetConfigwoMng	.1.3.6.1.4.1.2011.5.30.1.2.2.1.2
hwTdmModemAlrBufClear This value indicates the switch to clear the Alarm buffer in the remote modem. Options: 1. on(1) - Indicates that the switch is on. 2. off(2) - Indicates that the switch is off.	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.2011.5.30.1.2.2.1.3
hwTdmModemStatClear This value indicates resetting statistics of the selected port. Options: 1. none(1) - Indicates that do nothing. 2. clearSHDSLA(2) - Indicates that clear SHDSLA statistics. 3. clearSHDSLB(3) - Indicates that clear SH…	Enumerationr/w Enumerated Values: 1 none 2 clearSHDSLA 3 clearSHDSLB 4 clearE1 5 clearAll	.1.3.6.1.4.1.2011.5.30.1.2.2.1.4
hwTdmModemAlarmDevSeverity This object indicates the alarms severity device bit mapping.	OctetStringr/w Constraints: range: 2-2	.1.3.6.1.4.1.2011.5.30.1.2.2.1.5
hwTdmModemAlarmPortSeverity This object indicates the alarms severity port bit mapping.	OctetStringr/w Constraints: range: 12-12	.1.3.6.1.4.1.2011.5.30.1.2.2.1.6

This table describes the reference information about 
a TDM Modem alarm buffer that may be used for NMS polling. 
This information describe the alarm buffer index, the 
status of the alarm and severity of the alarm.The indexes 
of this table are ifIndex, hwTdmModemAlarmBufIndex.

hwTdmModemAlarmBufEntry row .1.3.6.1.4.1.2011.5.30.1.2.3.1

This table describes the reference information about
a TDM Modem alarm buffer that may be used for NMS polling.
This information describe the alarm buffer index, the
status of the alarm and severity of the alarm.The …

Indexes

RFC1213-MIBifIndex hwTdmModemAlarmBufIndex

Column	Syntax	OID
hwTdmModemAlarmBufIndex This value indicates the alarm buffer index in the modem.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.2011.5.30.1.2.3.1.1
hwTdmModemAlarmBufCode The code of the alarm. For text description of each Alarm code see Modem's specification.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.2011.5.30.1.2.3.1.2
hwTdmModemAlarmBufState The new status of the alarm. Options: 1. on(1) - Indicates that the alarm is on. 2. off(2) - Indicates that the alarm is off.	Enumeration Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.2011.5.30.1.2.3.1.3
hwTdmModemAlarmBufSeverity The severity of the alarm. Options: 1. major(1) - Indicates that the alarm is major. 2. minor(2) - Indicates that the alarm is minor. 3. warning(3) - Indicates that the alarm is warning.	Enumeration Enumerated Values: 1 major 2 minor 3 warning	.1.3.6.1.4.1.2011.5.30.1.2.3.1.4

This table describes the information about a TDM Modem SHDSL 
port configuration. This information describe the SHDSL port 
index, power backoff mode, worst case target SNR margin, 
current condition target SNR margin, PSD (Power Spectral 
Density) Mask, line probe mode, the loop attenuation alarm 
threshold, the SNR margin alarm threshold ,the line wiring,
the test timeout and test cmd.The index of this table is ifIndex.

hwTdmShdslConfEntry row .1.3.6.1.4.1.2011.5.30.1.3.1.1.1

This table describes the information about a TDM Modem SHDSL
port configuration. This information describe the SHDSL port
index, power backoff mode, worst case target SNR margin,
current condition target SNR margin, …

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
hwTdmShdslConfPowerBackOff This object configures the receiver at the associated segment endpoint to operate in power backoff mode. Options: 1. enable(1) - Indicates that enable the function. 2. disable(2) - Indicates that disable the function.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.30.1.3.1.1.1.1
hwTdmShdslConfWorstCaseSNRMargin This object specifies the upstream worst case target SNR margin for a SHDSL line. The SNR margin is the difference between the desired SNR and the actual SNR. Target SNR margin is the desired SNR margin for a unit. T…	dBInteger32r/w Constraints: range: -10-11	.1.3.6.1.4.1.2011.5.30.1.3.1.1.1.2
hwTdmShdslConfCurrentSNRMargin This object specifies the upstream current condition target SNR margin for a SHDSL line. The SNR margin is the difference between the desired SNR and the actual SNR. Target SNR margin is the desired SNR margin for a…	dBInteger32r/w Constraints: range: -10-11	.1.3.6.1.4.1.2011.5.30.1.3.1.1.1.3
hwTdmShdslConfPSD This object configures use of symmetric/asymmetric PSD (Power Spectral Density) Mask for the associated SHDSL Line. Support for symmetric PSD is mandatory for all supported data rates. Support for asymmetric PSD is …	Enumeration Enumerated Values: 0 asymDisable 1 asymEnable 2 r1AsymEnable 3 r2AsymEnable 4 asymSymEnable 5 psdUnknown	.1.3.6.1.4.1.2011.5.30.1.3.1.1.1.4
hwTdmShdslConfLineProbe This object enables/disables support for Line Probe of the units in a SHDSL line. When Line Probe is enabled, the system performs Line Probing to find the best possible rate (adaptive rate). If Line probe is disable…	Enumeration Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.30.1.3.1.1.1.5
hwTdmShdslConfThreshLoopAttenuation This object configures the loop attenuation alarm threshold.	dBInteger32r/w Constraints: range: 0-127	.1.3.6.1.4.1.2011.5.30.1.3.1.1.1.6
hwTdmShdslConfThreshSNRMargin This object configures the SNR margin alarm threshold.	dBInteger32r/w Constraints: range: 0-15	.1.3.6.1.4.1.2011.5.30.1.3.1.1.1.7
hwTdmShdslConfWireInterface This object configures the two-wire or optional four-wire operation for SHDSL Lines. Options: 1. twoWire(1) - Indicates that the operation for SHDSL Lines is two-wire. 2. fourWire(2) - Indicates that the operation for …	Enumerationr/w Enumerated Values: 1 twoWire 2 fourWire	.1.3.6.1.4.1.2011.5.30.1.3.1.1.1.8
hwTdmShdslConfTestTimeout This object is applicable only when a single test is running. It indicates the test activation timeout in minutes. When the timeout expires, the test is stopped. Value of 0 indicates test may run Forever.	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.2011.5.30.1.3.1.1.1.9
hwTdmShdslConfTestCmd Setting this object to a value as detailed further on will initiate a test on the specific port. The terminology and order of the first tests is according to the one use…	Enumerationr/w Enumerated Values: 1 stop 2 gsrLb 3 dteRlb 4 e1Rlb 5 otherloop	.1.3.6.1.4.1.2011.5.30.1.3.1.1.1.10

This table describes the reference information about a 
TDM Modem E1 port configuration. This information describe 
the E1 port index, line type, sync, idelcode and crc4 value.
The index of this table is ifIndex.

hwTdmE1ConfEntry row .1.3.6.1.4.1.2011.5.30.1.3.1.2.1

This table describes the reference information about a
TDM Modem E1 port configuration. This information describe
the E1 port index, line type, sync, idelcode and crc4 value.
The index of this entry is ifIndex.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
hwTdmE1ConfLineType This variable indicates the variety of T1/E1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonably carry, as well as the interpretation of th…	Enumerationr/w Enumerated Values: 0 esf 1 d4 2 e1 3 e1MF 4 unframed	.1.3.6.1.4.1.2011.5.30.1.3.1.2.1.1
hwTdmE1ConfSync This object enables returning to normal operation, after the end of a main/sub link red alarm event, in reduced time. 'tr62411' - complies with AT&T TR-62411 (after 10 seconds). Applicable for both T1 and E…	Enumerationr/w Enumerated Values: 1 fast 2 tr62411 3 ccitt	.1.3.6.1.4.1.2011.5.30.1.3.1.2.1.2
hwTdmE1ConfIdleCode This object selects the code transmitted to fill idle (unused) time slots in the main link frame. Valid range: (0 - FF HEX).	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.5.30.1.3.1.2.1.3
hwTdmE1ConfCrc4 This parameter indicates whether the CRC-4 is set to the local and remote device. Options: 1. yes(1) - Indicates that set CRC-4. 2. no(2) - Indicates that no set CRC-4.	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.2011.5.30.1.3.1.2.1.4

This table describes the information about a TDM Modem DTE 
port configuration. This information describe the DTE port 
index, local analog loop-back switch, remote loop-back 
switch, and Ir rate.The index of this table is ifIndex.

hwTdmDTEConfEntry row .1.3.6.1.4.1.2011.5.30.1.3.1.3.1

This table describes the information about a TDM Modem DTE
port configuration. This information describe the DTE port
index, local analog loop-back switch, remote loop-back
switch, and Ir rate.The index of this entry…

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
hwTdmDTEConfLlbEnable Enable/Disable local Analog Loop-Back on this modem, externally initiated. Options: 1. enable(1) - Indicates that enable the function. 2. disable(2) - Indicates that disable the function.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.30.1.3.1.3.1.1
hwTdmDTEConfRlbEnable Enable/Disable Remote Loop-Back on this modem, externally initiated. Options: 1. enable(1) - Indicates that enable the function. 2. disable(2) - Indicates that disable the function.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.30.1.3.1.3.1.2
hwTdmDTEConfIrRate This object indicates the DTE port rate.for mux device.When modem is two_wire model,its max supported value is 2048Kbps. Options: 1, r64Kbps(1) - Indicates the DTE port rate is r64Kbps. 2, r128Kbps(2) - Indicates the DT…	Enumerationr/w Enumerated Values: 1 r64Kbps 2 r128Kbps 3 r192Kbps 4 r256Kbps 5 r320Kbps 6 r384Kbps 7 r448Kbps 8 r512Kbps 9 r576Kbps 10 r640Kbps 11 r704Kbps 12 r768Kbps 13 r832Kbps 14 r896Kbps 15 r960Kbps 16 r1024Kbps 17 r1088Kbps 18 r1152Kbps 19 r1216Kbps 20 r1280Kbps 21 r1344Kbps 22 r1408Kbps 23 r1472Kbps 24 r1536Kbps 25 r1600Kbps 26 r1664Kbps 27 r1728Kbps 28 r1792Kbps 29 r1856Kbps 30 r1920Kbps 31 r1984Kbps 32 r2048Kbps 33 r2112Kbps 34 r2176Kbps 35 r2240Kbps 36 r2304Kbps 37 r2432Kbps 38 r2560Kbps 39 r2688Kbps 40 r2816Kbps 41 r2944Kbps 42 r3072Kbps 43 r3200Kbps 44 r3328Kbps 45 r3456Kbps 46 r3584Kbps 47 r3712Kbps 48 r3840Kbps 49 r3968Kbps 50 r4096Kbps 51 r4224Kbps 52 r4352Kbps 53 r4480Kbps 54 r4608Kbps 255 notApplicable	.1.3.6.1.4.1.2011.5.30.1.3.1.3.1.3

This table describes the reference information about a TDM Modem SHDSL port 
statistics including 15 minute and 1 day interval. This information describe
total elapsed seconds, the number of errored seconds, the number of unavailable
seconds, the number of severely errored seconds, the number of CRC anomalies, 
the number of loss of sync word seconds.
The indexes of this table are ifIndex, hwTdmShdslLineIndex.

hwTdmShdslCurrentStatEntry row .1.3.6.1.4.1.2011.5.30.1.3.2.1.1

This table describes the reference information about a TDM Modem SHDSL port
statistics including 15 minute and 1 day interval. This information describe
total elapsed seconds, the number of errored seconds, the number …

Indexes

RFC1213-MIBifIndex hwTdmShdslLineIndex

Column	Syntax	OID
hwTdmShdslLineIndex This value indicates the SHDSL line port index. Options: 1. lineA(1) - Indicates the SHDSL line port index is lineA. 2. lineB(2) - Indicates the SHDSL line port index is lineB.	Enumeration Enumerated Values: 1 lineA 2 lineB	.1.3.6.1.4.1.2011.5.30.1.3.2.1.1.1
hwTdmShdslCurrentTimeElapsed Total elapsed seconds in the current interval.	secondsUnsigned32 Constraints: range: 0-86399	.1.3.6.1.4.1.2011.5.30.1.3.2.1.1.2
hwTdmShdslCurrent15MinES Count of Errored Seconds (ES) in the current 15-minute interval.	secondsUnsigned32 Constraints: range: 0-899	.1.3.6.1.4.1.2011.5.30.1.3.2.1.1.3
hwTdmShdslCurrent15MinSES Count of Severely Errored Seconds (SES) in the current 15-minute interval. when sync is off ,it may be 900	secondsUnsigned32 Constraints: range: 0-900	.1.3.6.1.4.1.2011.5.30.1.3.2.1.1.4
hwTdmShdslCurrent15MinCRCanomalies Count of CRC anomalies in the current 15-minute interval.	detected CRC AnomaliesSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.30.1.3.2.1.1.5
hwTdmShdslCurrent15MinLOSWS Count of Loss of Sync Word (LOSW) Seconds in the current 15-minute interval.	secondsUnsigned32 Constraints: range: 0-899	.1.3.6.1.4.1.2011.5.30.1.3.2.1.1.6
hwTdmShdslCurrent15MinUAS Count of Unavailable Seconds (UAS) in the current 15-minute interval. when sync is off ,it may be 900	secondsUnsigned32 Constraints: range: 0-900	.1.3.6.1.4.1.2011.5.30.1.3.2.1.1.7
hwTdmShdslCurrent1DayES Count of Errored Seconds (ES) in the current day interval.	secondsUnsigned32 Constraints: range: 0-86399	.1.3.6.1.4.1.2011.5.30.1.3.2.1.1.8
hwTdmShdslCurrent1DaySES Count of Severely Errored Seconds (SES) in the current day interval.	secondsUnsigned32 Constraints: range: 0-86400	.1.3.6.1.4.1.2011.5.30.1.3.2.1.1.9
hwTdmShdslCurrent1DayCRCanomalies Count of CRC anomalies in the current day interval.	detected CRC AnomaliesSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.30.1.3.2.1.1.10
hwTdmShdslCurrent1DayLOSWS Count of Loss of Sync Word (LOSW) Seconds in the current day interval.	secondsUnsigned32 Constraints: range: 0-86399	.1.3.6.1.4.1.2011.5.30.1.3.2.1.1.11
hwTdmShdslCurrent1DayUAS Count of Unavailable Seconds (UAS) in the current day interval.	secondsUnsigned32 Constraints: range: 0-86400	.1.3.6.1.4.1.2011.5.30.1.3.2.1.1.12
hwTdmShdslCurrentSNRMargin The current SNR margin for this endpoint as reported in a Status Response/SNR message.	dBInteger32 Constraints: range: 0-15	.1.3.6.1.4.1.2011.5.30.1.3.2.1.1.13
hwTdmShdslCurrentLoopAttenuation The current loop attenuation for this endpoint as reported in a Network or Customer Side Performance Status message.	dBInteger32 Constraints: range: 0-127	.1.3.6.1.4.1.2011.5.30.1.3.2.1.1.14
hwTdmShdslCurrentTransPower The current transmit power in tenth of dBm.	dBmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.30.1.3.2.1.1.15
hwTdmShdslCurrentPowerBO The current transceiver actual power packoff from 0dB to 6dB.	dBInteger32 Constraints: range: 0-6	.1.3.6.1.4.1.2011.5.30.1.3.2.1.1.16

This table describes the reference information about a TDM Modem SHDSL port statistics 
in 15 minute interval. This information describe the SHDSL port interval index, the number 
of errored seconds, the number of unavailable seconds, the number of severely errored 
seconds, the number of CRC anomalies and the number of loss of sync word seconds.
The indexes of this table are ifIndex, hwTdmShdslLineIndex, hwTdmShdslIntervalIndex.

hwTdmShdslIntervalStatEntry row .1.3.6.1.4.1.2011.5.30.1.3.2.2.1

This table describes the reference information about a TDM Modem SHDSL port statistics
in 15 minute interval. This information describe the SHDSL port interval index, the number
of errored seconds, the number of unava…

Indexes

RFC1213-MIBifIndex hwTdmShdslLineIndex hwTdmShdslIntervalIndex

Column	Syntax	OID
hwTdmShdslIntervalIndex This value indicates the interval SHDSL port statistics index in the remote modem.	Integer32 Constraints: range: 1-96	.1.3.6.1.4.1.2011.5.30.1.3.2.2.1.1
hwTdmShdslIntervalES Count of Errored Seconds (ES) in 15-minute interval.	secondsUnsigned32 Constraints: range: 0-899	.1.3.6.1.4.1.2011.5.30.1.3.2.2.1.2
hwTdmShdslIntervalSES Count of Severely Errored Seconds (SES) in 15-minute interval. when sync is off ,it may be 900	secondsUnsigned32 Constraints: range: 0-899	.1.3.6.1.4.1.2011.5.30.1.3.2.2.1.3
hwTdmShdslIntervalCRCanomalies Count of CRC anomalies in 15-minute interval.	detected CRC AnomaliesSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.30.1.3.2.2.1.4
hwTdmShdslIntervalLOSWS Count of Loss of Sync Word (LOSW) Seconds in 15-minute interval.	secondsUnsigned32 Constraints: range: 0-899	.1.3.6.1.4.1.2011.5.30.1.3.2.2.1.5
hwTdmShdslIntervalUAS Count of Unavailable Seconds (UAS) in 15-minute interval. when sync is off ,it may be 900	secondsUnsigned32 Constraints: range: 0-899	.1.3.6.1.4.1.2011.5.30.1.3.2.2.1.6

This table describes the reference information about a TDM Modem SHDSL port statistics 
in 1-day interval. This information describe the SHDSL port interval index, the number 
of errored seconds, the number of unavailable seconds, the number of severely errored 
seconds, the number of CRC anomalies and the number of loss of sync word seconds.
The indexes of this table are ifIndex, hwTdmShdslLineIndex, hwTdmShdslTotalIndex.

hwTdmShdslTotalStatEntry row .1.3.6.1.4.1.2011.5.30.1.3.2.3.1

This table describes the reference information about a TDM Modem SHDSL port statistics
in 1-day interval. This information describe the SHDSL port interval index, the number
of errored seconds, the number of unavailab…

Indexes

RFC1213-MIBifIndex hwTdmShdslLineIndex hwTdmShdslTotalIndex

Column	Syntax	OID
hwTdmShdslTotalIndex This value indicates the total SHDSL port statistics index in the remote modem.	Integer32 Constraints: range: 1-7	.1.3.6.1.4.1.2011.5.30.1.3.2.3.1.1
hwTdmShdslTotalES Count of Errored Seconds (ES) in 1-day interval.	secondsUnsigned32 Constraints: range: 0-86304	.1.3.6.1.4.1.2011.5.30.1.3.2.3.1.2
hwTdmShdslTotalSES Count of Severely Errored Seconds (SES) in 1-day interval.	secondsUnsigned32 Constraints: range: 0-86400	.1.3.6.1.4.1.2011.5.30.1.3.2.3.1.3
hwTdmShdslTotalCRCanomalies Count of CRC anomalies in 1-day interval.	detected CRC AnomaliesSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.30.1.3.2.3.1.4
hwTdmShdslTotalLOSWS Count of Loss of Sync Word (LOSW) Seconds in 1-day interval.	secondsUnsigned32 Constraints: range: 0-86304	.1.3.6.1.4.1.2011.5.30.1.3.2.3.1.5
hwTdmShdslTotalUAS Count of Unavailable Seconds (UAS) in 1-day interval.	secondsUnsigned32 Constraints: range: 0-86400	.1.3.6.1.4.1.2011.5.30.1.3.2.3.1.6

This table describes the reference 
information about a TDM Modem E1 port statistics in current 15 minute interval. 
This information describe the E1 port current interval index, the number of 
BPV (BiPolar Violation) events detected during the last minute, the maximal 
number of BPV (BiPolar Violation) events (per minute) detected during the worst 
minute, the number of CRC error events, the average number of CRC error events 
per second, the number of errored seconds, the number of unavailable seconds,
the number of severely errored seconds, the number of bursty errored seconds, 
the number of loss of frame events, the number of controlled slip seconds, the 
number of degraded minutes and the number of seconds that have elapsed since the 
beginning of the near end current error- measurement period.
The index of this table is ifIndex.

hwTdmE1CurrentStatEntry row .1.3.6.1.4.1.2011.5.30.1.3.2.4.1

This table describes the reference
information about a TDM Modem E1 port statistics in current 15 minute interval.
This information describe the E1 port current interval index, the number of
BPV (BiPolar Violation) e…

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
hwTdmE1CurrentBpvLastMin This object provides the number of BPV (BiPolar Violation) events detected during the last minute.	Unsigned32 Constraints: range: 0-1000	.1.3.6.1.4.1.2011.5.30.1.3.2.4.1.1
hwTdmE1CurrentBpvMax This object provides the maximal number of BPV (BiPolar Violation) events (per minute) detected during the worst minute.	Unsigned32 Constraints: range: 0-1000	.1.3.6.1.4.1.2011.5.30.1.3.2.4.1.2
hwTdmE1CurrentCRCErrorEvents Counts the number of CRC error events, encountered in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.30.1.3.2.4.1.3
hwTdmE1CurrentCRCAvgError Counts the average number of CRC error events per second. The average is updated every second.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.30.1.3.2.4.1.4
hwTdmE1CurrentESs Counts the number of errored seconds measured encountered in the current 15 minute interval.	Unsigned32 Constraints: range: 0-899	.1.3.6.1.4.1.2011.5.30.1.3.2.4.1.5
hwTdmE1CurrentUASs Counts the number of unavailable seconds measured encountered in the current 15 minute interval.	Unsigned32 Constraints: range: 0-900	.1.3.6.1.4.1.2011.5.30.1.3.2.4.1.6
hwTdmE1CurrentSESs Counts the number of severely errored seconds measured encountered in the current 15 minute interval.	Unsigned32 Constraints: range: 0-900	.1.3.6.1.4.1.2011.5.30.1.3.2.4.1.7
hwTdmE1CurrentBESs Counts the number of bursty errored seconds measured encountered in the current 15 minute interval.	Unsigned32 Constraints: range: 0-899	.1.3.6.1.4.1.2011.5.30.1.3.2.4.1.8
hwTdmE1CurrentLOFC Counts the number of loss of frame events measured encountered in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.30.1.3.2.4.1.9
hwTdmE1CurrentCSSs Counts the number of controlled slip seconds measured encountered in the current 15 minute interval.	Unsigned32 Constraints: range: 0-899	.1.3.6.1.4.1.2011.5.30.1.3.2.4.1.10
hwTdmE1CurrentDMs Counts the number of degraded minutes measured encountered in the current 15 minute interval.	Unsigned32 Constraints: range: 0-15	.1.3.6.1.4.1.2011.5.30.1.3.2.4.1.11
hwTdmE1TimeElapsed The number of seconds that have elapsed since the beginning of the near end current error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceed…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.30.1.3.2.4.1.12

This table describes the reference information about a TDM Modem E1 
port statistics in 15 minute interval. This information describe the 
E1 port interval index, the number of errored seconds, the number of 
unavailable seconds, the number of severely errored seconds, the number 
of bursty errored seconds, the number of loss of frame events, the number 
of controlled slip seconds and the number of degraded minutes.The indexes 
of this table are ifIndex, hwTdmE1IntervalIndex.

hwTdmE1IntervalStatEntry row .1.3.6.1.4.1.2011.5.30.1.3.2.5.1

This table describes the reference information about a TDM Modem E1
port statistics in 15 minute interval. This information describe the
E1 port interval index, the number of errored seconds, the number of
unavailabl…

Indexes

RFC1213-MIBifIndex hwTdmE1IntervalIndex

Column	Syntax	OID
hwTdmE1IntervalIndex This value indicates the interval E1 port statistics index in the remote modem.	Integer32 Constraints: range: 1-96	.1.3.6.1.4.1.2011.5.30.1.3.2.5.1.1
hwTdmE1IntervalESs Counts the number of errored seconds measured encountered in 15 minute interval.	Unsigned32 Constraints: range: 0-899	.1.3.6.1.4.1.2011.5.30.1.3.2.5.1.2
hwTdmE1IntervalUASs Counts the number of unavailable seconds measured encountered in 15 minute interval.	Unsigned32 Constraints: range: 0-900	.1.3.6.1.4.1.2011.5.30.1.3.2.5.1.3
hwTdmE1IntervalSESs Counts the number of severely errored seconds measured encountered in 15 minute interval.	Unsigned32 Constraints: range: 0-900	.1.3.6.1.4.1.2011.5.30.1.3.2.5.1.4
hwTdmE1IntervalBESs Counts the number of bursty errored seconds measured encountered in 15 minute interval.	Unsigned32 Constraints: range: 0-899	.1.3.6.1.4.1.2011.5.30.1.3.2.5.1.5
hwTdmE1IntervalLOFC Counts the number of loss of frame events measured encountered in 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.30.1.3.2.5.1.6
hwTdmE1IntervalCSSs Counts the number of controlled slip seconds measured encountered in 15 minute interval.	Unsigned32 Constraints: range: 0-899	.1.3.6.1.4.1.2011.5.30.1.3.2.5.1.7
hwTdmE1IntervalDMs Counts the number of degraded minutes measured encountered in 15 minute interval.	Unsigned32 Constraints: range: 0-15	.1.3.6.1.4.1.2011.5.30.1.3.2.5.1.8
hwTdmE1TotalIntervalNum This value indicates the total number of E1 port statistics in 15 minute interval in 24 hour statistics.	Integer32 Constraints: range: 1-96	.1.3.6.1.4.1.2011.5.30.1.3.2.5.1.9
hwTdmE1Interval1DayESs The sum of Errored Seconds encountered by a E1 interface in the previous 24 hour interval.	Unsigned32 Constraints: range: 0-86304	.1.3.6.1.4.1.2011.5.30.1.3.2.5.1.10
hwTdmE1Interval1DayUASs The number of Unavailable Seconds encountered by a E1 interface in the previous 24 hour interval.	Unsigned32 Constraints: range: 0-86400	.1.3.6.1.4.1.2011.5.30.1.3.2.5.1.11
hwTdmE1Interval1DaySESs The number of Severely Errored Seconds encountered by a E1 interface in the previous 24 hour interval.	Unsigned32 Constraints: range: 0-86400	.1.3.6.1.4.1.2011.5.30.1.3.2.5.1.12
hwTdmE1Interval1DayBESs The number of Bursty Errored Seconds (BESs) encountered by a E1 interface in the previous 24 hour interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.30.1.3.2.5.1.13
hwTdmE1Interval1DayLOFC The number of loss of frame events encountered by a E1 interface in the previous 24 hour interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.30.1.3.2.5.1.14
hwTdmE1Interval1DayCSSs The number of Controlled Slip Seconds encountered by a E1 interface in the previous 24 hour interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.30.1.3.2.5.1.15
hwTdmE1Interval1DayDMs The number of Degraded Minutes (DMs) encountered by a E1 interface in the previous 24 hour interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.30.1.3.2.5.1.16
hwTdmE1Interval1DayDEGMinute The number of DEG Minutes encountered by a E1 interface in the previous 24 hour interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.30.1.3.2.5.1.17

This table describes the configuration about a TDM Modem 
to config TDM SHDSL terminal.The index of this table is ifIndex.

hwTdmAdtranScriptEntry row .1.3.6.1.4.1.2011.5.30.1.4.1.1

This table describes the configuration about a TDM Modem
to config TDM SHDSL terminal.The index of this entry is ifIndex.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
hwTdmAdtranScript This object is used to config TDM SHDSL terminal, and it may include sereval commands. Each command ends with one or more '\n', and every '\n' means delay 1 second too. For example: command '123\r\n\n\n45\n' expects tw…	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.5.30.1.4.1.1.1
hwTdmAdtranScriptLatestResult The result of the lastest script configuration. Options: 1. idle(1) - Indicates that no configuration. 2. fail(2) - Indicates that last configuration failed. 3. busy(3) - Indicates that Operating new config. 4. success(…	Enumeration Enumerated Values: 1 idle 2 fail 3 busy 4 success	.1.3.6.1.4.1.2011.5.30.1.4.1.1.2