HUAWEI-TAD-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
2
Rows
2
Columns
27
hwTADInterfaceTable
table.1.3.6.1.4.1.2011.5.25.128.1.1
·
1 row entry
·
17 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwTADInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-TAD-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-TAD-MIB::hwTADInterfaceTable'
Transmission alarm damping interface configuration table.
The entry of a SDH or SONET interface with damping function enabled.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| hwTADInterfaceIndexIndex number of the interface. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.2011.5.25.128.1.1.1.1 | ||||
| hwTADFilterEnableWhether filter function is enabled. | HWEnableValuer/w Type Values:
| .1.3.6.1.4.1.2011.5.25.128.1.1.1.2 | ||||
| hwTADFilterExpireTimeHow long the alarm will be postponed to process. Unit: millisecond. | Integer32r/w Constraints: range: 20-10000 | .1.3.6.1.4.1.2011.5.25.128.1.1.1.3 | ||||
| hwTADDampingEnableWhether damping function is enabled. | HWEnableValuer/w Type Values:
| .1.3.6.1.4.1.2011.5.25.128.1.1.1.4 | ||||
| hwTADSuppressThe suppressing value. When figure-of-merit of alarm exceeds this value, this alarm will be damped. | Integer32r/w Constraints: range: 2-19999 | .1.3.6.1.4.1.2011.5.25.128.1.1.1.5 | ||||
| hwTADCeilingThe ceiling value. Figure-of-merit can't exceed this value. The ceiling value must be larger than suppressing value. | Integer32r/w Constraints: range: 1001-20000 | .1.3.6.1.4.1.2011.5.25.128.1.1.1.6 | ||||
| hwTADReuseThe reusing value. When figure-of-merit becomes lower than this value. The alarm will be reused (exit from suppressing status). The reusing value must be less than suppressing value. | Integer32r/w Constraints: range: 1-19998 | .1.3.6.1.4.1.2011.5.25.128.1.1.1.7 | ||||
| hwTADDecayOkThe half decay time when alarm status is down. Unit: millisecond. | Integer32r/w Constraints: range: 500-10000 | .1.3.6.1.4.1.2011.5.25.128.1.1.1.8 | ||||
| hwTADDecayNgThe half decay time when alarm status is up. Unit: millisecond. | Integer32r/w Constraints: range: 500-10000 | .1.3.6.1.4.1.2011.5.25.128.1.1.1.9 | ||||
| hwTADResetStatisticsWhether to reset alarm statistics. 1 means resetting statistics once. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2011.5.25.128.1.1.1.10 | ||||
| hwTADResetTimeLast reset time. | SNMPv2-TCDateAndTime Type Constraints: range: 8range: 11Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month … | .1.3.6.1.4.1.2011.5.25.128.1.1.1.11 | ||||
| hwTADB3tcaThresholdB3tca threshold in form of 10e-n. | Integer32r/w Constraints: range: 3-9 | .1.3.6.1.4.1.2011.5.25.128.1.1.1.12 | ||||
| hwTADSdbereThresholdSdbere threshold in form of 10e-n. | Integer32r/w Constraints: range: 3-9 | .1.3.6.1.4.1.2011.5.25.128.1.1.1.13 | ||||
| hwTADSfbereThresholdSfbere threshold in form of 10e-n. | Integer32r/w Constraints: range: 3-9 | .1.3.6.1.4.1.2011.5.25.128.1.1.1.14 | ||||
| hwTADB1tcaThresholdB1tca threshold in form of 10e-n. | Integer32r/w Constraints: range: 3-9 | .1.3.6.1.4.1.2011.5.25.128.1.1.1.15 | ||||
| hwTADB2tcaThresholdB2tca threshold in form of 10e-n. | Integer32r/w Constraints: range: 3-9 | .1.3.6.1.4.1.2011.5.25.128.1.1.1.16 | ||||
| hwTADBip2tcaThresholdBip2tca threshold in form of 10e-n. | Integer32r/w Constraints: range: 3-9 | .1.3.6.1.4.1.2011.5.25.128.1.1.1.17 |
hwTADAlarmTable
table.1.3.6.1.4.1.2011.5.25.128.1.2
·
1 row entry
·
10 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwTADAlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-TAD-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-TAD-MIB::hwTADAlarmTable'
Transmission alarm damping alarm configuration table.
The entry of an alarm.
Indexes
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| hwTADAlarmIfIndexIndex number of the interface. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.2011.5.25.128.1.2.1.1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| hwTADAlarmTypeIndex number of the alarm. The range is from 1 to 39, corresponding to: auais, b3tca, lais, lof, lom, lop, los, lrdi, lrei, oof, pais, prdi, prei, pplm, rdool, rrool, sdbere, sfbere, trool, puneq, lcd, wlnk, oduais, odu… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.2011.5.25.128.1.2.1.2 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| hwTADAlarmIfDownWhether this alarm leads to interface down. In default lais, lof and los are enabled to lead interface down. | HWEnableValuer/w Type Values:
| .1.3.6.1.4.1.2011.5.25.128.1.2.1.3 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| hwTADAlarmLogWhether this alarm will be logged. In default all alarm types won't be logged. | HWEnableValuer/w Type Values:
| .1.3.6.1.4.1.2011.5.25.128.1.2.1.4 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| hwTADAlarmStatusThe status of the alarm. 1 means alarm is up, 2 means alarm is down. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.2011.5.25.128.1.2.1.5 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| hwTADAlarmInFilterWhether this alarm is in filtering status. 1 means alarm is in filtering status, 2 means alarm isn't in filtering status. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.2011.5.25.128.1.2.1.6 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| hwTADAlarmFigureThis figure is used to evaluate the stability of the alarm. Large value means un-stability. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.2011.5.25.128.1.2.1.7 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| hwTADAlarmInSuppressWhether this alarm is in suppressing status. 1 means alarm is in suppressing status, 2 means alarm isn't in suppressing status. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.2011.5.25.128.1.2.1.8 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| hwTADAlarmFlappingCountHow many times alarm's status changed. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.2011.5.25.128.1.2.1.9 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| hwTADAlarmSuppressCountHow many times alarm is suppressed. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.2011.5.25.128.1.2.1.10 |