HUAWEI-STORAGE-HARDWARE-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
13
Rows
13
Columns
175
hwInfoDiskTable
table.1.3.6.1.4.1.34774.4.1.23.5.1
·
1 row entry
·
26 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwInfoDiskTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-STORAGE-HARDWARE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-STORAGE-HARDWARE-MIB::hwInfoDiskTable'
This table is used to check the disk information about a device.
A table containing the part component.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Disk ID, table index.
|
OctetString Constraints: range: 0-1024 |
.1.3.6.1.4.1.34774.4.1.23.5.1.1.1 |
|
Disk health status. For details, see:
1 Normal 2 Fault 3 Pre-Fail 4 Partially Broken 5 Degraded 6 Bad Sectors Found 7 Bit Errors Found 8 Consistent 9 Inconsistent 10 Busy 11 No Input 12 Low Battery 13 Single Link Fault … |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.1.1.2 |
|
Disk running status. For details, see:
1: Normal 2: Running 3: Not running 4: Not existed 5: Sleep in high temperature 6: Starting 7: Power failure rotection 8: Spin down 9: Started 10: Link Up 11: Link Down 12: Powerin… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.1.1.3 |
|
Disk location.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.1.1.4 |
|
Disk type. Possible values are:
0: FC 1: SAS 2: SATA 3: SSD 4: NL_SAS 5: SLC SSD 6: MLC SSD 7:FC_SED 8:SAS_SED 9:SATA_SED 10:SSD_SED 11:NL_SAS_SED 12:SLC_SSD_SED 13:MLC_SSD_SED 14:NVMe_SSD 15:SMR_SATA 16:NVMe_SSD_SED 17… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.1.1.5 |
|
Disk capacity(unit: MB).
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.34774.4.1.23.5.1.1.6 |
|
Logical type of a disk. Possible values are:
1: FREE 2: MEMBER 3: SPARE 4: CACHE |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.1.1.7 |
|
Rotational speed of a disk(unit: rpm).
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.1.1.8 |
|
Disk interface bandwidth(unit: Mbit/s).
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.1.1.9 |
|
Sector size of a disk (unit: B).
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.1.1.10 |
|
Disk temperature (unit: C).
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.34774.4.1.23.5.1.1.11 |
|
Disk model.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.1.1.12 |
|
Firmware version of a disk.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.1.1.13 |
|
Disk manufacturer.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.1.1.14 |
|
Disk SN.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.1.1.15 |
|
Disk indicator status. Possible values are:
0: OFF 1: ON 2: STEADY ON |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.1.1.16 |
|
ID of a disk domain.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.1.1.17 |
|
Name of a disk domain.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.1.1.18 |
|
ID of a disk domain tier.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.1.1.19 |
|
To determine whether a disk is a coffer disk. Possible values are:
0: NO 1: YES |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.1.1.20 |
|
Disk operation period(unit: day).
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.1.1.21 |
|
Progress of disk reconstruction, copyback, pre-copy, or destruction(unit: %).
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.1.1.22 |
|
Disk barcode.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.1.1.23 |
|
Capacity usage of a disk(unit: %).
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.1.1.24 |
|
Health score of a disk. If the value is 255, indicating invalid.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.1.1.25 |
|
Electronic label of a disk.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.1.1.26 |
hwInfoControllerTable
table.1.3.6.1.4.1.34774.4.1.23.5.2
·
1 row entry
·
17 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwInfoControllerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-STORAGE-HARDWARE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-STORAGE-HARDWARE-MIB::hwInfoControllerTable'
This table is used to check the controller information about a device.
A table containing the part component.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Controller ID, table index.
|
OctetString Constraints: range: 0-1024 |
.1.3.6.1.4.1.34774.4.1.23.5.2.1.1 |
|
Controller health status. For details, see:
1 Normal 2 Fault 3 Pre-Fail 4 Partially Broken 5 Degraded 6 Bad Sectors Found 7 Bit Errors Found 8 Consistent 9 Inconsistent 10 Busy 11 No Input 12 Low Battery 13 Single Link … |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.2.1.2 |
|
Controller running status. For details, see:
1: Normal 2: Running 3: Not running 4: Not existed 5: Sleep in high temperature 6: Starting 7: Power failure rotection 8: Spin down 9: Started 10: Link Up 11: Link Down 12: P… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.2.1.3 |
|
Controller CPU.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.2.1.4 |
|
Controller location.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.2.1.5 |
|
Controller role. Possible values are:
0: Normal 1: Master 2: Slave |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.2.1.6 |
|
Cache capacity of a controller (unit: MB).
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.2.1.7 |
|
CPU usage of a controller (unit: %).
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.2.1.8 |
|
Memory usage of the operating system in the controller (unit: %).
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.2.1.9 |
|
Power voltage of a controller (unit: 0.1 V).
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.2.1.10 |
|
Software version of a controller.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.2.1.11 |
|
PCB version of a controller.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.2.1.12 |
|
SES version of a controller.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.2.1.13 |
|
BMC version of a controller. When the value is empty or
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.2.1.14 |
|
Logical version of a controller.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.2.1.15 |
|
BIOS version of a controller.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.2.1.16 |
|
Electronic label of a controller.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.2.1.17 |
hwInfoPowerTable
table.1.3.6.1.4.1.34774.4.1.23.5.3
·
1 row entry
·
10 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwInfoPowerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-STORAGE-HARDWARE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-STORAGE-HARDWARE-MIB::hwInfoPowerTable'
This table is used to check the power supply information about a device.
A table containing the part component.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
ID of a power supply, table index.
|
OctetString Constraints: range: 0-1024 |
.1.3.6.1.4.1.34774.4.1.23.5.3.1.1 |
|
Location of a power supply.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.3.1.2 |
|
Health status of a power supply. For details, see:
1 Normal 2 Fault 3 Pre-Fail 4 Partially Broken 5 Degraded 6 Bad Sectors Found 7 Bit Errors Found 8 Consistent 9 Inconsistent 10 Busy 11 No Input 12 Low Battery 13 Singl… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.3.1.3 |
|
Operating status of a power supply. For details, see:
1: Normal 2: Running 3: Not running 4: Not existed 5: Sleep in high temperature 6: Starting 7: Power failure rotection 8: Spin down 9: Started 10: Link Up 11: Link D… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.3.1.4 |
|
Type of a power supply. Possible values are:
0: DC 1: AC 2: HV 255:Unknown |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.3.1.5 |
|
Manufacturer of a power supply.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.3.1.6 |
|
Model of a power supply.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.3.1.7 |
|
Version of a power supply.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.3.1.8 |
|
Production date of a power supply.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.3.1.9 |
|
SN of a power supply.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.3.1.10 |
hwInfoFanTable
table.1.3.6.1.4.1.34774.4.1.23.5.4
·
1 row entry
·
6 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwInfoFanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-STORAGE-HARDWARE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-STORAGE-HARDWARE-MIB::hwInfoFanTable'
This table is used to check the fan information about a device.
A table containing the part component.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Fan ID, table index.
|
OctetString Constraints: range: 0-1024 |
.1.3.6.1.4.1.34774.4.1.23.5.4.1.1 |
|
Fan Location.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.4.1.2 |
|
Health status of a fan. For details, see:
1 Normal 2 Fault 3 Pre-Fail 4 Partially Broken 5 Degraded 6 Bad Sectors Found 7 Bit Errors Found 8 Consistent 9 Inconsistent 10 Busy 11 No Input 12 Low Battery 13 Single Link Fa… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.4.1.3 |
|
Operating status of a fan. For details, see:
1: Normal 2: Running 3: Not running 4: Not existed 5: Sleep in high temperature 6: Starting 7: Power failure rotection 8: Spin down 9: Started 10: Link Up 11: Link Down 12: P… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.4.1.4 |
|
Operating level of a fan. Possible values are:
0: Low 1: Normal 2: High |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.4.1.5 |
|
Electronic label of a fan.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.4.1.6 |
hwInfoBBUTable
table.1.3.6.1.4.1.34774.4.1.23.5.5
·
1 row entry
·
11 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwInfoBBUTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-STORAGE-HARDWARE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-STORAGE-HARDWARE-MIB::hwInfoBBUTable'
This table is used to check the BBU information about a device.
A table containing the part component.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
BBU ID, table index.
|
OctetString Constraints: range: 0-1024 |
.1.3.6.1.4.1.34774.4.1.23.5.5.1.1 |
|
BBU Location.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.5.1.2 |
|
Health status of a BBU. For details, see:
1 Normal 2 Fault 3 Pre-Fail 4 Partially Broken 5 Degraded 6 Bad Sectors Found 7 Bit Errors Found 8 Consistent 9 Inconsistent 10 Busy 11 No Input 12 Low Battery 13 Single Link Fa… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.5.1.3 |
|
Running status of a BBU. For details, see:
1: Normal 2: Running 3: Not running 4: Not existed 5: Sleep in high temperature 6: Starting 7: Power failure rotection 8: Spin down 9: Started 10: Link Up 11: Link Down 12: Pow… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.5.1.4 |
|
Type of a BBU. Possible values are:
0: BBU |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.5.1.5 |
|
Current voltage of a BBU (unit: 0.1 V).
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.5.1.6 |
|
Discharge times of a BBU(unit: times).
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.5.1.7 |
|
Firmware version of a BBU.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.5.1.8 |
|
Shipping date of a BBU.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.5.1.9 |
|
Owning controller of a BBU.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.5.1.10 |
|
Electronic label of a BBU.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.5.1.11 |
hwInfoEnclosureTable
table.1.3.6.1.4.1.34774.4.1.23.5.6
·
1 row entry
·
13 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwInfoEnclosureTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-STORAGE-HARDWARE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-STORAGE-HARDWARE-MIB::hwInfoEnclosureTable'
This table is used to check the enclosure information about a device.
A table containing the part component.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Enclosure ID, table index.
|
OctetString Constraints: range: 0-1024 |
.1.3.6.1.4.1.34774.4.1.23.5.6.1.1 |
|
Enclosure name.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.6.1.2 |
|
Logical type of an enclosure. Possible values are:
0: EXP 1: CTRL 2: DSW 3: MSW 4: SVP |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.6.1.3 |
|
Health status of an enclosure. For details, see:
1 Normal 2 Fault 3 Pre-Fail 4 Partially Broken 5 Degraded 6 Bad Sectors Found 7 Bit Errors Found 8 Consistent 9 Inconsistent 10 Busy 11 No Input 12 Low Battery 13 Single … |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.6.1.4 |
|
Operating status of an enclosure. For details, see:
1: Normal 2: Running 3: Not running 4: Not existed 5: Sleep in high temperature 6: Starting 7: Power failure rotection 8: Spin down 9: Started 10: Link Up 11: Link Dow… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.6.1.5 |
|
Enclosure location.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.6.1.6 |
|
Enclosure type. Possible values are:
0:BMC Controller 1:2 U 2-controller 12-slot 3.5-inch 6 Gbit/s SAS controller enclosure 2:2 U 2-controller 24-slot 2.5-inch 6 Gbit/s SAS controller enclosure 16:2 U 12-slot 3.5-inch 6… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.6.1.7 |
|
Enclosure temperature (unit: C).
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.34774.4.1.23.5.6.1.8 |
|
Enclosure SN.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.6.1.9 |
|
MAC address of an enclosure.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.6.1.10 |
|
Enclosure height (unit: U).
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.6.1.11 |
|
Number of cascaded enclosures.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.6.1.12 |
|
Electronic label of an enclosure.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.6.1.13 |
hwInfoPortComTable
table.1.3.6.1.4.1.34774.4.1.23.5.7
·
1 row entry
·
5 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwInfoPortComTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-STORAGE-HARDWARE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-STORAGE-HARDWARE-MIB::hwInfoPortComTable'
This table is used to check the serial port information about a device.
A table containing the part component.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
ID of a serial port, table index.
|
OctetString Constraints: range: 0-1024 |
.1.3.6.1.4.1.34774.4.1.23.5.7.1.1 |
|
Location of a serial port.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.7.1.2 |
|
Health status of a serial port. For details, see:
1 Normal 2 Fault 3 Pre-Fail 4 Partially Broken 5 Degraded 6 Bad Sectors Found 7 Bit Errors Found 8 Consistent 9 Inconsistent 10 Busy 11 No Input 12 Low Battery 13 Single… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.7.1.3 |
|
Operating status of a serial port. For details, see:
1: Normal 2: Running 3: Not running 4: Not existed 5: Sleep in high temperature 6: Starting 7: Power failure rotection 8: Spin down 9: Started 10: Link Up 11: Link Do… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.7.1.4 |
|
Logical type of a serial port. For details, see:
0: HOST 1: EXP 2: MNGT 3: INNER 4: MAINTENANCE 5: MNGT_SRV 6: MAINTENANCE_SRV 7: BACKUP_MGR 8: PRODUCT_STORAGE 9: BACKUP_STORAGE 10: ETH_NOT_CONFIG 11: IP_SCALE_OUT |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.7.1.5 |
hwInfoPortEthTable
table.1.3.6.1.4.1.34774.4.1.23.5.8
·
1 row entry
·
22 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwInfoPortEthTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-STORAGE-HARDWARE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-STORAGE-HARDWARE-MIB::hwInfoPortEthTable'
This table is used to check the Ethernet port information about a device.
A table containing the part component.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
ID of an Ethernet port, table index.
|
OctetString Constraints: range: 0-1024 |
.1.3.6.1.4.1.34774.4.1.23.5.8.1.1 |
|
Location of an Ethernet port.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.8.1.2 |
|
Health status of an Ethernet port. For details, see:
1 Normal 2 Fault 3 Pre-Fail 4 Partially Broken 5 Degraded 6 Bad Sectors Found 7 Bit Errors Found 8 Consistent 9 Inconsistent 10 Busy 11 No Input 12 Low Battery 13 Sin… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.8.1.3 |
|
Operating status of an Ethernet port. For details, see:
1: Normal 2: Running 3: Not running 4: Not existed 5: Sleep in high temperature 6: Starting 7: Power failure rotection 8: Spin down 9: Started 10: Link Up 11: Link… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.8.1.4 |
|
Logical type of an Ethernet port. For details, see:
0: HOST 1: EXP 2: MNGT 3: INNER 4: MAINTENANCE 5: MNGT_SRV 6: MAINTENANCE_SRV 7: BACKUP_MGR 8: PRODUCT_STORAGE 9: BACKUP_STORAGE 10: ETH_NOT_CONFIG 11: IP_SCALE_OUT |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.8.1.5 |
|
IPv4 address of an Ethernet port.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.8.1.6 |
|
IPv4 mask of an Ethernet port.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.8.1.7 |
|
IPv4 gateway of an Ethernet port.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.8.1.8 |
|
IPv6 address of an Ethernet port.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.8.1.9 |
|
IPv6 mask of an Ethernet port.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.8.1.10 |
|
IPv6 gateway of an Ethernet port.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.8.1.11 |
|
MAC address of an Ethernet port.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.8.1.12 |
|
Role of an Ethernet port. Possible values are:
2: INI 3: TGT 4: INI_AND_TGT 4294967295: Invalid |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.8.1.13 |
|
Auto-negotiation mode of an Ethernet port. Possible values are:
1: HALF_DUPLEX 2: DUPLEX 3: AUTO If the parameter value is 4294967295, this parameter is invalid. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.8.1.14 |
|
Maximum transmission unit (MTU) of an Ethernet port (unit: B).
If the parameter value is 4294967295, this parameter is invalid. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.8.1.15 |
|
Working rate of an Ethernet port (unit: Mbit/s).
If the parameter value is 4294967295, this parameter is invalid. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.8.1.16 |
|
Bond name of an Ethernet port.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.8.1.17 |
|
iSCSI port number of an Ethernet port. The port is occupied when iSCSI is enabled. The default port number is 3260.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.8.1.18 |
|
iSCSI name of an Ethernet port.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.8.1.19 |
|
Number of error packets of an Ethernet port.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.8.1.20 |
|
Number of lost packets of an Ethernet port.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.8.1.21 |
|
Time when the bit error statistics of an Ethernet port starts. If
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.8.1.22 |
hwInfoPortFCTable
table.1.3.6.1.4.1.34774.4.1.23.5.9
·
1 row entry
·
20 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwInfoPortFCTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-STORAGE-HARDWARE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-STORAGE-HARDWARE-MIB::hwInfoPortFCTable'
This table is used to check the Fibre Channel port information about a device.
A table containing the part component.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
ID of a Fibre Channel port, table index.
|
OctetString Constraints: range: 0-1024 |
.1.3.6.1.4.1.34774.4.1.23.5.9.1.1 |
|
Location of a Fibre Channel port.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.9.1.2 |
|
Health status of a Fibre Channel port. For details, see:
1 Normal 2 Fault 3 Pre-Fail 4 Partially Broken 5 Degraded 6 Bad Sectors Found 7 Bit Errors Found 8 Consistent 9 Inconsistent 10 Busy 11 No Input 12 Low Battery 13… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.9.1.3 |
|
Operating status of a Fibre Channel port. For details, see:
1: Normal 2: Running 3: Not running 4: Not existed 5: Sleep in high temperature 6: Starting 7: Power failure rotection 8: Spin down 9: Started 10: Link Up 11: … |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.9.1.4 |
|
Logical type of a Fibre Channel port. For details, see:
0: HOST 1: EXP 2: MNGT 3: INNER 4: MAINTENANCE 5: MNGT_SRV 6: MAINTENANCE_SRV 7: BACKUP_MGR 8: PRODUCT_STORAGE 9: BACKUP_STORAGE 10: ETH_NOT_CONFIG 11: IP_SCALE_OUT |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.9.1.5 |
|
Working rate of a Fibre Channel port (unit: Mbit/s).
If the parameter value is 4294967295, this parameter is invalid. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.9.1.6 |
|
Configured rate of a Fibre Channel port (unit: Mbit/s).
0 indicates autonegotiation. 4294967295 indicates invalid. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.9.1.7 |
|
World wide name (WWN) of a Fibre Channel port.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.9.1.8 |
|
Role of a Fibre Channel port. Possible values are:
2: INI 3: TGT 4: INI_AND_TGT 4294967295: Invalid |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.9.1.9 |
|
Status of a Fibre Channel port. Possible values are:
0: Not Exist 1: Offline 2: Online 4294967295: Invalid |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.9.1.10 |
|
Operating mode of a Fibre Channel port. Possible values are:
0: Fabric 1: FC-AL 2: Point To Point 3: Auto 4294967295: Invalid |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.9.1.11 |
|
Configured mode of a Fibre Channel port. Possible values are:
0: Fabric 1: FC-AL 2: P2P 3: Auto 4294967295: Invalid |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.9.1.12 |
|
Flogin delay of a Fibre Channel port (unit: ms).
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.9.1.13 |
|
Number of Loss of Signal errors of a Fibre Channel port.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.9.1.14 |
|
Number of Bad RX Char errors of a Fibre Channel port.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.9.1.15 |
|
Number of Loss of Sync errors of a Fibre Channel port.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.9.1.16 |
|
Number of Link Fail errors of a Fibre Channel port.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.9.1.17 |
|
Time when the bit error statistics of a Fibre Channel port starts. If
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.9.1.18 |
|
Number of Cyclic redundancy check errors of a Fibre Channel port.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.9.1.19 |
|
Number of Frame end sign errors of a Fibre Channel port.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.9.1.20 |
hwInfoPortPCIETable
table.1.3.6.1.4.1.34774.4.1.23.5.11
·
1 row entry
·
14 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwInfoPortPCIETable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-STORAGE-HARDWARE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-STORAGE-HARDWARE-MIB::hwInfoPortPCIETable'
This table is used to check the PCIe port information about a device.
A table containing the part component.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
ID of a PCIe port, table index.
|
OctetString Constraints: range: 0-1024 |
.1.3.6.1.4.1.34774.4.1.23.5.11.1.1 |
|
Location of a PCIe port.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.11.1.2 |
|
Health status of a PCIe port. For details, see:
1 Normal 2 Fault 3 Pre-Fail 4 Partially Broken 5 Degraded 6 Bad Sectors Found 7 Bit Errors Found 8 Consistent 9 Inconsistent 10 Busy 11 No Input 12 Low Battery 13 Single L… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.11.1.3 |
|
Operating status of a PCIe port. For details, see:
1: Normal 2: Running 3: Not running 4: Not existed 5: Sleep in high temperature 6: Starting 7: Power failure rotection 8: Spin down 9: Started 10: Link Up 11: Link Down… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.11.1.4 |
|
Data transmission rate of a PCIe port (unit: Mbit/s).
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.11.1.5 |
|
ID of the port connecting to a PCIe port.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.11.1.6 |
|
ID of the port that is supposed to connect to a PCIe port.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.11.1.7 |
|
Number of bit errors of a PCIe port.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.11.1.8 |
|
Number of ECRC errors of a PCIe port.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.11.1.9 |
|
Number of bad TLPs of a PCIe port.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.11.1.10 |
|
Number of bad DLLPs of a PCIe port.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.11.1.11 |
|
Number of receiver errors of a PCIe port.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.11.1.12 |
|
Number of chip ECC errors of a PCIe port.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.11.1.13 |
|
Time when the bit error statistics of a PCIe port starts.
If |
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.11.1.14 |
hwInfoPortSASTable
table.1.3.6.1.4.1.34774.4.1.23.5.12
·
1 row entry
·
14 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwInfoPortSASTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-STORAGE-HARDWARE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-STORAGE-HARDWARE-MIB::hwInfoPortSASTable'
This table is used to check the SAS port information about a device.
A table containing the part component.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
ID of a SAS port, table index.
|
OctetString Constraints: range: 0-1024 |
.1.3.6.1.4.1.34774.4.1.23.5.12.1.1 |
|
Location of a SAS port.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.12.1.2 |
|
Health status of a SAS port. For details, see:
1 Normal 2 Fault 3 Pre-Fail 4 Partially Broken 5 Degraded 6 Bad Sectors Found 7 Bit Errors Found 8 Consistent 9 Inconsistent 10 Busy 11 No Input 12 Low Battery 13 Single Li… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.12.1.3 |
|
Operating status of a SAS port. For details, see:
1: Normal 2: Running 3: Not running 4: Not existed 5: Sleep in high temperature 6: Starting 7: Power failure rotection 8: Spin down 9: Started 10: Link Up 11: Link Down … |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.12.1.4 |
|
Logical type of a SAS port. For details, see:
0: HOST 1: EXP 2: MNGT 3: INNER 4: MAINTENANCE 5: MNGT_SRV 6: MAINTENANCE_SRV 7: BACKUP_MGR 8: PRODUCT_STORAGE 9: BACKUP_STORAGE 10: ETH_NOT_CONFIG 11: IP_SCALE_OUT |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.12.1.5 |
|
Working rate of a SAS port (unit: Mbit/s).
If the parameter value is 4294967295, this parameter is invalid. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.12.1.6 |
|
WWN of a SAS port.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.12.1.7 |
|
Role of a SAS port. Possible values are:
2: INI 3: TGT 4: INI_AND_TGT 4294967295: Invalid |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.12.1.8 |
|
Number of invalid DWORDs of a SAS port.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.12.1.9 |
|
Number of consistency errors of a SAS port.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.12.1.10 |
|
Number of lost DWORDs of a SAS port.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.12.1.11 |
|
Number of physical reset errors of a SAS port.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.12.1.12 |
|
Time when the bit error statistics of a SAS port starts.
If |
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.12.1.13 |
|
To determine whether a SAS port is enabled. Possible values are:
0: No 1: Yes |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.12.1.14 |
.1.3.6.1.4.1.34774.4.1.23.5.13
·
1 row entry
·
8 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwInfoInterfaceModuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-STORAGE-HARDWARE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-STORAGE-HARDWARE-MIB::hwInfoInterfaceModuleTable'
This table is used to check the interface module information about a device.
A table containing the part component.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
ID of an interface module, table index.
|
OctetString Constraints: range: 0-1024 |
.1.3.6.1.4.1.34774.4.1.23.5.13.1.1 |
|
Location of an interface module.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.13.1.2 |
|
Health status of an interface module. For details, see:
1 Normal 2 Fault 3 Pre-Fail 4 Partially Broken 5 Degraded 6 Bad Sectors Found 7 Bit Errors Found 8 Consistent 9 Inconsistent 10 Busy 11 No Input 12 Low Battery 13 … |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.13.1.3 |
|
Operating status of an interface module. For details, see:
1: Normal 2: Running 3: Not running 4: Not existed 5: Sleep in high temperature 6: Starting 7: Power failure rotection 8: Spin down 9: Started 10: Link Up 11: L… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.13.1.4 |
|
Type of an interface module. For details, see:
1: 4 x 4 G FC Interface Module 2: 2 x 4 G FC Interface Module 3: 2 x GE Electrical Interface Module 4: 4 x SAS I Interface Module 5: Swapped FC Interface Module 6: 2 x 10GE… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.13.1.5 |
|
Logical version of an interface module, When the value is
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.13.1.6 |
|
PCB version of an interface module.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.13.1.7 |
|
Electronic label of an interface module.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.13.1.8 |
hwInfoExpBoardTable
table.1.3.6.1.4.1.34774.4.1.23.5.14
·
1 row entry
·
9 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwInfoExpBoardTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-STORAGE-HARDWARE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-STORAGE-HARDWARE-MIB::hwInfoExpBoardTable'
This table is used to check the expansion module information about a device.
A table containing the part component.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
ID of an expansion module, table index.
|
OctetString Constraints: range: 0-1024 |
.1.3.6.1.4.1.34774.4.1.23.5.14.1.1 |
|
Location of an expansion module.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.14.1.2 |
|
Health status of an expansion module. For details, see:
1 Normal 2 Fault 3 Pre-Fail 4 Partially Broken 5 Degraded 6 Bad Sectors Found 7 Bit Errors Found 8 Consistent 9 Inconsistent 10 Busy 11 No Input 12 Low Battery 13 … |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.14.1.3 |
|
Operating status of an expansion module. For details, see:
1: Normal 2: Running 3: Not running 4: Not existed 5: Sleep in high temperature 6: Starting 7: Power failure rotection 8: Spin down 9: Started 10: Link Up 11: L… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.14.1.4 |
|
Model of an expansion module. Possible values are:
0: SAS 1: FC |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.34774.4.1.23.5.14.1.5 |
|
Logical version of an expansion module, When the value is
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.14.1.6 |
|
PCB version of an expansion module.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.14.1.7 |
|
SES version of an expansion module.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.14.1.8 |
|
Electronic label of an expansion module.
|
OctetString | .1.3.6.1.4.1.34774.4.1.23.5.14.1.9 |