HUAWEI-SR-TRAP-MIB
The MIB module to describe traps for the SR
Version 2 Protocol.
Segment Routing (SR) as defined in [SR-ARCH] utilizes forwarding
instructions called segments to direct packets through the network.
Depending on the forwarding plane architecture in use, routing
protocols advertise various identifiers which define the permissible
values which can be used as segments, which values are assigned to
specific prefixes, etc. Where segments have global scope it is
necessary to have non-conflicting assignments - but given that the
advertisements may originate from multiple nodes the possibility
exists that advertisements may be received which are either
internally inconsistent or conflicting with advertisements originated
by other nodes. In such cases it is necessary to have consistent
resolution of conflicts network-wide in order to avoid forwarding
loops.
This draft,draft-ietf-spring-conflict-resolution-05
describes the Conflict detection and resolution.
When conflict is detected user must be informed the same using the
trap defined in this MIB.
- Source file
HUAWEI-SR-TRAP-MIB- Last revised
- Identity
hwSrTrap- Base OID
1.3.6.1.4.1.2011.5.25.353
Imported Objects
| HUAWEI-MIB | hwDatacomm |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) |
Net-SNMP examples using the huawei MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'HUAWEI-SR-TRAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HUAWEI-SR-TRAP-MIB::hwSrTrap'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-SR-TRAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-SR-TRAP-MIB::hwSrTrap'
Objects (14)
Showing 14 of 14 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.2011.5.25.353 |
||
.1.3.6.1.4.1.2011.5.25.353.1 |
||
|
|
OctetString
|
.1.3.6.1.4.1.2011.5.25.353.1.1 |
|
|
.1.3.6.1.4.1.2011.5.25.353.1.2 |
|
|
|
.1.3.6.1.4.1.2011.5.25.353.1.3 |
|
.1.3.6.1.4.1.2011.5.25.353.1.4 |
||
.1.3.6.1.4.1.2011.5.25.353.1.5 |
||
|
Enumeration
|
.1.3.6.1.4.1.2011.5.25.353.1.6 |
|
|
Enumeration
|
.1.3.6.1.4.1.2011.5.25.353.1.8 |
|
|
Enumeration
|
.1.3.6.1.4.1.2011.5.25.353.1.9 |
|
.1.3.6.1.4.1.2011.5.25.353.2 |
||
.1.3.6.1.4.1.2011.5.25.353.4 |
||
.1.3.6.1.4.1.2011.5.25.353.4.1 |
||
.1.3.6.1.4.1.2011.5.25.353.4.2 |
Dependencies (3) 3 direct Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- HUAWEI-MIBhuawei
- SNMPv2-CONFrfc
- HUAWEI-SR-TRAP-MIBhuaweiselected
Conformance Groups (2)
|
hwSrSetTrap hwSrProcessId hwSrPrefixSid hwSrPrefixAddressMask hwSrPrefixAddress hwSrProtocol hwSrConflictType hwSrConflictState
These objects are required to control traps from HUAWEI SR systems.
|
.1.3.6.1.4.1.2011.5.25.353.4.1.1
|
|
|
A grouping of OSPF trap events, as specified
in NOTIFICATION-TYPE constructs. |
.1.3.6.1.4.1.2011.5.25.353.4.1.2
|
Compliance Statements (2)
OID
.1.3.6.1.4.1.2011.5.25.353.4.2.1The compliance statement.
Required groups
| mandatory | hwSrTrapControlGroup | |
| optional | hwSrTrapControlGroup | This group is optional but recommended for all HUAWEI SR systems. |
OID
.1.3.6.1.4.1.2011.5.25.353.4.2.2The compliance statement.
Required groups
| mandatory | hwSrTrapControlGroup | |
| mandatory | hwSrTrapEventGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| hwSrProcessId | notifyonly | This object is only required to be supplied within notifications. |
|
| hwSrPrefixSid | notifyonly | This object is only required to be supplied within notifications. |
|
| hwSrPrefixAddressMask | notifyonly | This object is only required to be supplied within notifications. |
|
| hwSrPrefixAddress | notifyonly | This object is only required to be supplied within notifications. |
|
| hwSrProtocol | notifyonly | This object is only required to be supplied within notifications. |
|
| hwSrConflictType | notifyonly | This object is only required to be supplied within notifications. |
|
| hwSrConflictState | notifyonly | This object is only required to be supplied within notifications. |
Notifications / Traps (1)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.2011.5.25.353.2.1 |
An hwSrPrefixSidConflict trap signifies that a prefix sid
conflict is detected. |