HUAWEI-SMARTLINK-MIB Table View

This is port configuration table which received flush packet, 
and configuration relation of port received flush packet was described.
The index of table is hwSmartLinkRpcIfIndex.

hwSmartLinkRevPortCfgEntry row .1.3.6.1.4.1.2011.5.25.42.5.1.7.1

The table includes the information of the received flush packet port configuration information.
The index of the table is hwSmartLinkRpcIfIndex.

Indexes

hwSmartLinkRpcIfIndex

Column	Syntax	OID
hwSmartLinkRpcIfIndex The index of port from which received flush packets.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.42.5.1.7.1.1
hwSmartLinkRpcRevVlan Set the VLAN ID to verify the validity of flush packets received. Ranging from 0 to 4095.	Q-BRIDGE-MIBVlanIdOrNoner/w Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.42.5.1.7.1.2
hwSmartLinkRpcRevPassword Set the password to verify the validity of flush packets received.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.2011.5.25.42.5.1.7.1.3
hwSmartLinkRpcRevAuthMode Set the password mode to verify the validity of flush packets received.	Enumerationr/w Enumerated Values: 0 null 1 simple 2 sha	.1.3.6.1.4.1.2011.5.25.42.5.1.7.1.4

The table includes the information of the smart link group configuration information,
and include the mode of smart link group, working status of group, control vlan of group etc.

hwSmartLinkGroupCfgEntry row .1.3.6.1.4.1.2011.5.25.42.5.1.8.1

The table includes the information of the smart link group configuration information.
The index of the table is hwSmartLinkGcGroupId.

Indexes

hwSmartLinkGcGroupId

Column	Syntax	OID
hwSmartLinkGcGroupId Smart link group index.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.2011.5.25.42.5.1.8.1.1
hwSmartLinkGcMasterIfIndex The master interface index of smart link group.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.42.5.1.8.1.2
hwSmartLinkGcSlaveIfIndex The slave interface index of smart link group.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.42.5.1.8.1.3
hwSmartLinkGcGroupStatus Working status of smart link group, include none, master, slave, idle and init. none: all ports in group are inactive. Master: master port is active, and slave port is inactive. Slave: master port is inactive, and slav…	Enumeration Enumerated Values: 1 none 2 master 3 slave 4 idle 5 init	.1.3.6.1.4.1.2011.5.25.42.5.1.8.1.4
hwSmartLinkGcEnable Startup or close the smart link group. Before startup the smart link group, the group must be created.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.42.5.1.8.1.5
hwSmartLinkGcSendControlVlan Set the tag of flush packets which send from this smart link group.	Q-BRIDGE-MIBVlanIdOrNoner/w Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.42.5.1.8.1.6
hwSmartLinkGcSendPassword Set password of flush packets which send from this smart link group.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.2011.5.25.42.5.1.8.1.7
hwSmartLinkGcLock Active port was locked on master port	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.42.5.1.8.1.8
hwSmartLinkGcForce Active port was locked on slave port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.42.5.1.8.1.9
hwSmartLinkGcRevertWtrTime Set wait-to-restore time.	Integer32r/w Constraints: range: 30-1200	.1.3.6.1.4.1.2011.5.25.42.5.1.8.1.10
hwSmartLinkGcRevertEnable When wait-to-restore timer is over, the smart link group link will be switched.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.42.5.1.8.1.11
hwSmartLinkGcManual The link was switched every setting manual command.	Enumerationr/w Enumerated Values: 1 switch 2 unused	.1.3.6.1.4.1.2011.5.25.42.5.1.8.1.12
hwSmartLinkGcRowStatus Status of smart link group row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.5.1.8.1.13
hwSmartLinkGcAuthMode Set the password mode of flush packets which send from this smart link group.	Enumerationr/w Enumerated Values: 0 null 1 simple 2 sha	.1.3.6.1.4.1.2011.5.25.42.5.1.8.1.14

This table is the configuration table of member port of smart link group.
This table described that configuration relation of member port of smart link group.
This table index is hwSmartLinkPcGroupId and hwSmartLinkPcPortType.

hwSmartLinkPortCfgEntry row .1.3.6.1.4.1.2011.5.25.42.5.1.9.1

This table described that configuration relation of member port of smart link group.
This table index is hwSmartLinkPcGroupId and hwSmartLinkPcPortType.

Indexes

hwSmartLinkPcGroupId hwSmartLinkPcPortType

Column	Syntax	OID
hwSmartLinkPcGroupId Smart link group index.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.2011.5.25.42.5.1.9.1.1
hwSmartLinkPcPortType The role of smart link group member port.	Enumeration Enumerated Values: 1 master 2 slave	.1.3.6.1.4.1.2011.5.25.42.5.1.9.1.2
hwSmartLinkPcIfIndex Interface index of member port of smart link group.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.42.5.1.9.1.3
hwSmartLinkPcPortStatus The status of member port, include unknown, active and inactive.	Enumeration Enumerated Values: 1 unknown 2 active 3 inactive	.1.3.6.1.4.1.2011.5.25.42.5.1.9.1.4
hwSmartLinkPcSendFlushNum The total of flush packets send from this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.42.5.1.9.1.5
hwSmartLinkPcSendFlushTime The time when send flush packet lastly. field octets contents range - - - - - - - - - - - - - - 1 1-2 year 0..65536 2 3 month …	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.2011.5.25.42.5.1.9.1.6
hwSmartLinkPcRowStatus Status of monitor link group row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.5.1.9.1.7

This is status information table of monitor link group,
and index is hwMonitorLinkGcGroupId.

hwMonitorLinkGroupCfgEntry row .1.3.6.1.4.1.2011.5.25.42.5.1.10.1

This is status information table of monitor link group,
and index is hwMonitorLinkGcGroupId.

Indexes

hwMonitorLinkGcGroupId

Column	Syntax	OID
hwMonitorLinkGcGroupId Monitor link group index.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.2011.5.25.42.5.1.10.1.1
hwMonitorLinkGcRecoverTime Set recover time, when uplink port turn to UP and over the recover time, all downlink port will be undo shutdown.	Integer32r/w Constraints: range: 3-60	.1.3.6.1.4.1.2011.5.25.42.5.1.10.1.2
hwMonitorLinkGcRowStatus Status of monitor link group row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.5.1.10.1.3

This is the information table of member port in monitor link group upink,
The table indexes are hwMonitorLinkUlGroupId, hwMonitorLinkUlPortType.

hwMonitorLinkUpLinkPortEntry row .1.3.6.1.4.1.2011.5.25.42.5.1.11.1

This is the information table of member port in monitor link group upink,
The table indexes are hwMonitorLinkUlGroupId and hwMonitorLinkUlPortType.

Indexes

hwMonitorLinkUlGroupId hwMonitorLinkUlPortType

Column	Syntax	OID
hwMonitorLinkUlGroupId Monitor link group index.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.2011.5.25.42.5.1.11.1.1
hwMonitorLinkUlPortType Type of uplink port in monitor link group, include smart link group and switch port.	Enumeration Enumerated Values: 1 smartLink 2 switchPort	.1.3.6.1.4.1.2011.5.25.42.5.1.11.1.2
hwMonitorLinkUlPortValue When port type is smart link, the value is smart link group index. When port type is switch port, the value is ifindex of switch port.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.5.1.11.1.3
hwMonitorLinkUlPortStatus State of member port in monitor group, include UP and DOWN.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2011.5.25.42.5.1.11.1.4
hwMonitorLinkUlPortUpTime Show the time when the port state turn to UP recently.	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.2011.5.25.42.5.1.11.1.5
hwMonitorLinkUlPortDownTime Show the time when the port state turn to DOWN recently.	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.2011.5.25.42.5.1.11.1.6
hwMonitorLinkUlRowStatus Status of monitor link group row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.5.1.11.1.7

This is the information table of member port in monitor link group downlink,
The table indexes are hwMonitorLinkDlGroupId and hwMonitorLinkDlArrayIndex.

hwMonitorLinkDownLinkPortEntry row .1.3.6.1.4.1.2011.5.25.42.5.1.12.1

This is the information table of member port in monitor link group downlink,
The table indexes are hwMonitorLinkDlGroupId and hwMonitorLinkDlArrayIndex.

Indexes

hwMonitorLinkDlGroupId hwMonitorLinkDlArrayIndex

Column	Syntax	OID
hwMonitorLinkDlGroupId Monitor link group index.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.2011.5.25.42.5.1.12.1.1
hwMonitorLinkDlArrayIndex The downlink array index of Monitor link group.	Integer32 Constraints: range: 1-512	.1.3.6.1.4.1.2011.5.25.42.5.1.12.1.2
hwMonitorLinkDlIfIndex Member interface index of monitor link group downlink.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.42.5.1.12.1.3
hwMonitorLinkDlPortStatus State of member port in monitor group, include UP and DOWN.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2011.5.25.42.5.1.12.1.4
hwMonitorLinkDlPortUpTime Show the time when the port state turn to UP recently.	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.2011.5.25.42.5.1.12.1.5
hwMonitorLinkDlPortDownTime Show the time when the port state turn to DOWN recently.	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.2011.5.25.42.5.1.12.1.6
hwMonitorLinkDlRowStatus Status of monitor link group row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.5.1.12.1.7

This is port configuration table which received flush packet, 
and configuration relation of port received flush packet was described.
The index of table is hwSmartLinkMulRpcIfIndex and hwSmartLinkMulRpcVlan.

hwSmartLinkMulRevPortCfgEntry row .1.3.6.1.4.1.2011.5.25.42.5.1.13.1

The table includes the information of the received flush packet port configuration information.
The index of the table is hwSmartLinkMulRpcIfIndex and hwSmartLinkMulRpcVlan.

Indexes

hwSmartLinkMulRpcIfIndex hwSmartLinkMulRpcVlan

Column	Syntax	OID
hwSmartLinkMulRpcIfIndex The index of port from which received flush packets.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.42.5.1.13.1.1
hwSmartLinkMulRpcVlan The control-vlan of port from which received flush packets	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.2011.5.25.42.5.1.13.1.2
hwSmartLinkMulRpcRevPassword Set the password to verify the validity of flush packets received.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.2011.5.25.42.5.1.13.1.3
hwSmartLinkMulRpcRevAuthMode Set the password mode to verify the validity of flush packets received.	Enumerationr/w Enumerated Values: 0 null 1 simple 2 sha	.1.3.6.1.4.1.2011.5.25.42.5.1.13.1.4
hwSmartLinkMulRpcRevRowStatus Operation of CreateAndGo can be used to create a new instance, and operation of Destroy be used to destroy an existent index.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.5.1.13.1.50