HUAWEI-SECURITY-IPSEC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
87

hwIPSecTunnelConfigTable

table
.1.3.6.1.4.1.2011.6.122.26.2 · 1 row entry · 34 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIPSecTunnelConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-SECURITY-IPSEC-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-SECURITY-IPSEC-MIB::hwIPSecTunnelConfigTable' 
This table specifies the configuration attributes for Huawei IPSec tunnel.
hwIPSecTunnelConfigEntry row .1.3.6.1.4.1.2011.6.122.26.2.1
Each entry in the hwIPSecTunnelConfigTable holds a set of monitoring configuration parameters associated with an instance of IPSec tunnel.
Indexes
Column Syntax OID
hwIPSecIfIndex
Index of the router interface corresponding to the IPSec tunnel.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.2.1.1
hwIPSecTunnelPolicyNum
The tunnel number of IPSec policy.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.2.1.2
hwIPSecTunnelIndex
Index of the IPSec tunnel.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.2.1.3
hwIPSecTunnelRuleId
ID of the ACL rule in the current IPSec policy.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.2.1.4
hwIPSecTunnelDstIP
Destination IP address of the tunnel (peer end).
OctetString
Constraints:
range: 1-128
 .1.3.6.1.4.1.2011.6.122.26.2.1.5
hwIPSecTunnelInsideIP
Intranet IP address of the peer end during remote access.
OctetString
Constraints:
range: 1-128
 .1.3.6.1.4.1.2011.6.122.26.2.1.6
hwIPSecTunnelRemotePort
Port number of the peer end of the tunnel.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.2.1.7
hwIPSecTunnelCpuID
CPU ID of the tunnel.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.2.1.8
hwIPSecTunnelEncapMode
Encapsulation mode of the tunnel (tunneling mode or transmission mode).
Enumeration
Enumerated Values:
0tunnel
1transport
 .1.3.6.1.4.1.2011.6.122.26.2.1.9
hwIPSecTunnelNatTraver
Whether the tunnel needs NAT traversal (If yes, the value is 1.).
Enumeration
Enumerated Values:
0noNatTraversal
1natTraversal
 .1.3.6.1.4.1.2011.6.122.26.2.1.10
hwIPSecTunnelFromIKEV2
Whether the tunnel adopts IKEv2 (If yes, the value is 1.).
Enumeration
Enumerated Values:
0noIkev2
1ikev2
 .1.3.6.1.4.1.2011.6.122.26.2.1.11
hwIPSecTunnelEncryptMode
Encryption mode of the tunnel.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.2.1.12
hwIPSecTunnelESPDigestMode
ESP check mode of the tunnel.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.2.1.13
hwIPSecTunnelAHDigestMode
AH check mode of the tunnel.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.2.1.14
hwIPSecTunnelProto
Protocol of the tunnel (ESP or AH, or both).
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.2.1.15
hwIPSecTunnelOutPortIndex
Index of the egress of the tunnel.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.2.1.16
hwIPSecTunnelSrcPort
Indicates the source port number if NAT traversal is adopted.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.2.1.17
hwIPSecTunnelDstPort
Indicates the destination port number if NAT traversal is adopted.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.2.1.18
hwIPSecTunnelVrfIndex
VPN ID protected by the tunnel.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.2.1.19
hwIPSecTunnelIfVrfIndex
VPN ID of the sending interface of the tunnel.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.2.1.20
hwIPSecTunnelSrcIP
Source IP address of the tunnel (local end).
OctetString
Constraints:
range: 1-128
 .1.3.6.1.4.1.2011.6.122.26.2.1.21
hwIPSecTunnelSpeedLimitIn
Rate limiting pre-configured in the incoming direction.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.2.1.22
hwIPSecTunnelSpeedLimitOut
Rate limiting pre-configured in the outgoing direction.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.2.1.23
hwIPSecTunnelInitiator
Initiator or responder of the IPSec tunnel.
Enumeration
Enumerated Values:
0responder
1ikev2Initiator
2ikev1Initiator
 .1.3.6.1.4.1.2011.6.122.26.2.1.24
hwIPSecTunnelLifeSize
Life cycle of the IPSec tunnel (in kbytes).
Unsigned32
Constraints:
range: 0-200000000
 .1.3.6.1.4.1.2011.6.122.26.2.1.25
hwIPSecTunnelLifeTime
Life cycle of the IPSec tunnel (in seconds).
Unsigned32
Constraints:
range: 1-604800
 .1.3.6.1.4.1.2011.6.122.26.2.1.26
hwIPSecTunnelPolicyName
Security policy for the IPSec tunnel.
OctetString
Constraints:
range: 1-255
 .1.3.6.1.4.1.2011.6.122.26.2.1.27
hwIPSecTunnelSaStatus
Status of the SA.
Enumeration
Enumerated Values:
0free
1ocuppied
 .1.3.6.1.4.1.2011.6.122.26.2.1.28
hwIPSecTunnelSlotID
SLOT ID of the tunnel.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.2.1.29
hwIPSecTunnelFlowInfo
Data flow of the IPSec tunnel
OctetString
Constraints:
range: 1-255
 .1.3.6.1.4.1.2011.6.122.26.2.1.30
hwIPSecTunnelPolicyAlias
Security policy alias for the IPSec tunnel.
OctetString
Constraints:
range: 1-128
 .1.3.6.1.4.1.2011.6.122.26.2.1.31
hwIPSecTunnelDstIPv6
Destination IPv6 address of the tunnel (peer end).
OctetString
Constraints:
range: 1-128
 .1.3.6.1.4.1.2011.6.122.26.2.1.32
hwIPSecTunnelInsideIPv6
Intranet IPv6 address of the peer end during remote access.
OctetString
Constraints:
range: 1-128
 .1.3.6.1.4.1.2011.6.122.26.2.1.33
hwIPSecTunnelSrcIPv6
Source IPv6 address of the tunnel (local end).
OctetString
Constraints:
range: 1-128
 .1.3.6.1.4.1.2011.6.122.26.2.1.34

hwIPSecTunnelStatsTable

table
.1.3.6.1.4.1.2011.6.122.26.3 · 1 row entry · 31 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIPSecTunnelStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-SECURITY-IPSEC-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-SECURITY-IPSEC-MIB::hwIPSecTunnelStatsTable' 
This table specifies the status attributes for Huawei IPSec tunnel.
hwIPSecTunnelStatsEntry row .1.3.6.1.4.1.2011.6.122.26.3.1
Each entry in the hwIPSecTunnelConfigTable holds a set of monitoring status parameters associated with an instance of IPSec tunnel.
Indexes
Column Syntax OID
hwIPSecTunnelSaIDIn
Index of the incoming IPSec tunnel.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.3.1.1
hwIPSecTunnelSaIDOut
Index of the outgoing IPSec tunnel.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.3.1.2
hwIPSecTunnelFlowSoftExpireIn
Incoming soft timeout traffic (in bytes).
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.3.1.3
hwIPSecTunnelFlowSoftExpireOut
Outgoing soft timeout traffic (in bytes).
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.3.1.4
hwIPSecTunnelFlowHardExpireIn
Incoming hard timeout traffic (in bytes).
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.3.1.5
hwIPSecTunnelFlowHardExpireOut
Outgoing hard timeout traffic (in bytes).
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.3.1.6
hwIPSecTunnelRemainTime
Remaining time of the IPSec tunnel (in seconds).
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.3.1.7
hwIPSecTunnelRemainSize
Remaining bytes of the IPSec tunnel (in kbytes).
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.3.1.8
hwIPSecTunnelSpiIn
Incoming SPI.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.3.1.9
hwIPSecTunnelSpiOut
Outgoing SPI.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.3.1.10
hwIPSecTunnelInSideSpiIn
SPI of the internal ESP header when both AH and ESP are adopted in the incoming direction.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.3.1.11
hwIPSecTunnelInSideSpiOut
SPI of the internal ESP header when both AH and ESP are adopted in the outgoing direction.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.3.1.12
hwIPSecTunnelESPSequenceNumberIn
Serial number of the incoming ESP protocol.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.3.1.13
hwIPSecTunnelESPSequenceNumberOut
Serial number of the outgoing ESP protocol.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.3.1.14
hwIPSecTunnellAHSequenceNumberIn
Serial number of the incoming AH protocol.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.3.1.15
hwIPSecTunnellAHSequenceNumberOut
Serial number of the outgoing AH protocol.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.3.1.16
hwIPSecTunnelMemApplyFail
Number of discarded packets because packets to be encrypted are too long.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.122.26.3.1.17
hwIPSecTunnelBadAuth
Number of discarded packets caused by the authentication failure of received packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.122.26.3.1.18
hwIPSecTunnelReplay
Number of discarded packets caused by receiving replayed packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.122.26.3.1.19
hwIPSecTunnelAfterReCheckErr
Number of discarded packets caused by the decryption post-check failure.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.122.26.3.1.20
hwIPSecTunnelPktDropByteLimitIn
Number of discarded packets caused by the exceeding the byte limit in the incoming direction.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.122.26.3.1.21
hwIPSecTunnelPktDropByteLimitOut
Number of discarded packets caused by the exceeding of the byte limit in the outgoing direction.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.122.26.3.1.22
hwIPSecTunnelFIBSearchErr
Number of discarded packets caused by the route check failure.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.122.26.3.1.23
hwIPSecTunnelBytesPerSecondIn
Speed of inbound flow in bytes.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.3.1.24
hwIPSecTunnelBytesPerSecondOut
Speed of outbound flow in bytes.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.3.1.25
hwIPSecTunnelPacketsPerSecondIn
Speed of inbound flow in packets.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.3.1.26
hwIPSecTunnelPacketsPerSecondOut
Speed of outbound flow in packets.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.3.1.27
hwIPSecTunnelErrPacketsPerSecondIn
Speed of inbound error packets.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.3.1.28
hwIPSecTunnelErrPacketsPerSecondOut
Speed of outbound error packets.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.3.1.29
hwIPSecTunnelErrPacketsIn
Number of inbound error packets.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.3.1.30
hwIPSecTunnelErrPacketsOut
Number of outbound error packets.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.3.1.31

hwIPSecSaStatisticTable

table
.1.3.6.1.4.1.2011.6.122.26.4 · 1 row entry · 11 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIPSecSaStatisticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-SECURITY-IPSEC-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-SECURITY-IPSEC-MIB::hwIPSecSaStatisticTable' 
This table specifies the SA numbers of policies which have been bound with interfaces.
hwIPSecSaStatisticEntry row .1.3.6.1.4.1.2011.6.122.26.4.1
.
Indexes
Column Syntax OID
hwIPSecSaStatisticTunnelPolicyName
Security policy for the IPSec tunnel.
OctetString
Constraints:
range: 1-255
 .1.3.6.1.4.1.2011.6.122.26.4.1.1
hwIPSecSaStatisticSaInCnt
Incoming SA number.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.4.1.2
hwIPSecSaStatisticSaOutCnt
Outgoing SA number.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.4.1.3
hwIPSecTunnelByteInput
Num of bytes received by the IPSec Tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.122.26.4.1.4
hwIPSecTunnelByteOutput
Num of bytes sent by the IPSec Tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.122.26.4.1.5
hwIPSecTunnelPacketInput
Num of packets received by the IPSec Tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.122.26.4.1.6
hwIPSecTunnelPacketOutput
Num of packets sent by the IPSec Tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.122.26.4.1.7
hwIPSecTunnelDroppedPacketInput
Number of packets discarded by the IPSec tunnel in the inbound direction
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.122.26.4.1.8
hwIPSecTunnelDroppedPacketOutput
Number of packets discarded by the IPSec tunnel in the outbound direction
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.122.26.4.1.9
hwIPSecTunnelDialUserCount
IPSec tunnel remote access users
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.4.1.10
hwIPSecSaStatisticTunnelPolicyAlias
Security policy alias for the IPSec tunnel.
OctetString
Constraints:
range: 1-128
 .1.3.6.1.4.1.2011.6.122.26.4.1.11

hwIPSecGdoiStatsTable

table
.1.3.6.1.4.1.2011.6.122.26.8 · 1 row entry · 10 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIPSecGdoiStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-SECURITY-IPSEC-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-SECURITY-IPSEC-MIB::hwIPSecGdoiStatsTable' 
This table specifies the status attributes for Huawei IPSec Gdoi.
hwIPSecGdoiStatsEntry row .1.3.6.1.4.1.2011.6.122.26.8.1
Each entry in the hwIPSecGdoiStatsTable holds a set of monitoring status parameters associated with an instance of IPSec gdoi.
Indexes
Column Syntax OID
hwIPSecGdoiGroupID
ID of the GM group corresponding to the GM and KMC.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.122.26.8.1.1
hwIPSecGdoiRemoteAddress
IP Address where a GM points to.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.122.26.8.1.2
hwIPSecTunnelSendPacket
Statistic the number of the sent packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.122.26.8.1.3
hwIPSecTunnelSendSize
Statistic the total bytes of the sent packet.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.122.26.8.1.4
hwIPSecTunnelSendErrorPacket
Statistic the error number of the sent packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.122.26.8.1.5
hwIPSecTunnelSendErrorSize
Statistic the total Error bytes of the sent packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.122.26.8.1.6
hwIPSecTunnelRecvPacket
Statistic the number of the recieved packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.122.26.8.1.7
hwIPSecTunnelRecvSize
Statistic the total bytes of the recieved packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.122.26.8.1.8
hwIPSecTunnelRecvErrorPacket
Statistic the error number of the recieved packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.122.26.8.1.9
hwIPSecTunnelRecvErrorSize
Statistic the total error bytes of the recieved packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.6.122.26.8.1.10

hwIPSecTEKSAStatusTable

table
.1.3.6.1.4.1.2011.6.122.26.9 · 1 row entry · 1 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIPSecTEKSAStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-SECURITY-IPSEC-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-SECURITY-IPSEC-MIB::hwIPSecTEKSAStatusTable' 
This table specifies the status attributes for Huawei IPSec Gdoi TEK SA.
hwIPSecTEKSAStatusEntry row .1.3.6.1.4.1.2011.6.122.26.9.1
Each entry in the hwIPSecTEKSAStatusEntry holds a set of monitoring status parameters associated with an instance of IPSec gdoi.
Indexes
Column Syntax OID
hwIPSecTEKSAStatus
Request for status of TEK-SA with the specified group-id and remote-address(If yes, the value is 0.).
Enumeration
Enumerated Values:
0teksa
1noteksa
 .1.3.6.1.4.1.2011.6.122.26.9.1.1