HUAWEI-RSVPTE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
11
Rows
11
Columns
195

hwRsvpTeSessionTable

table
.1.3.6.1.4.1.2011.5.25.148.1.1 · 1 row entry · 11 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwRsvpTeSessionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-RSVPTE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-RSVPTE-MIB::hwRsvpTeSessionTable' 
A table of all sessions seen by a  given  sys-
tem.
hwRsvpTeSessionEntry row .1.3.6.1.4.1.2011.5.25.148.1.1.1
A single session seen by a given system.
Indexes
Column Syntax OID
hwRsvpTeSessionNumber
The number of this session. This is for SNMP
Indexing purposes only and has no relation to
any protocol value.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.1.1.1
hwRsvpTeSessionType
The type of session (IP4, IP6, IP6 with flow
information, etc).
INTEGRATED-SERVICES-MIBSessionType
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.2011.5.25.148.1.1.1.2
hwRsvpTeSessionDestAddr
The destination address used by all senders in
this session.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.5.25.148.1.1.1.3
hwRsvpTeSessionDestAddrLength
The CIDR prefix length of the session address,
which is 32 for IP4 host and multicast ad-
dresses, and 128 for IP6 addresses.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.1.1.4
hwRsvpTeSessionSenders
The number of distinct senders currently known
to be part of this session.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.1.1.5
hwRsvpTeSessionReceivers
The number of reservations being requested of
this system for this session.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.1.1.6
hwRsvpTeSessionRequests
The number of reservation requests this system
is sending upstream for this session.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.1.1.7
hwRsvpTeSessionTunnelId
A 16-bit identifier used in the SESSION that remains
constant over the life of the tunnel.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.1.1.8
hwRsvpTeSessionTunnelExtId
An identifier used in the SESSION that remains
constant over the life of the tunnel. Normally
the identifier is set to all zeros. Ingress nodes
that wish to narrow the scope of a SESSION to the
ingress-egress pair may …
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.148.1.1.1.9
hwRsvpTeSessionLspsNumber
The number of LSPs that belong to this session.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.1.1.10
hwRsvpTeSessionStyle
An enumerable value to identify the treatment of
reservations for different senders within the
same session: WF 10001b, FF01010b, SE 10010b.
Enumeration
Enumerated Values:
10ff
17wf
18se
 .1.3.6.1.4.1.2011.5.25.148.1.1.1.11

hwRsvpTeSenderTable

table
.1.3.6.1.4.1.2011.5.25.148.1.2 · 1 row entry · 73 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwRsvpTeSenderTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-RSVPTE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-RSVPTE-MIB::hwRsvpTeSenderTable' 
Information describing the  state  information
displayed by senders in PATH messages.
hwRsvpTeSenderEntry row .1.3.6.1.4.1.2011.5.25.148.1.2.1
Information describing the state information
displayed by a single sender's PATH message.
Indexes
Column Syntax OID
hwRsvpTeSenderNumber
The number of this sender. This is for SNMP
Indexing purposes only and has no relation to
any protocol value.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.1
hwRsvpTeSenderType
The type of session (IP4, IP6, IP6 with flow
information, etc).
INTEGRATED-SERVICES-MIBSessionType
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.2
hwRsvpTeSenderDestAddr
The destination address used by all senders in
this session.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.3
hwRsvpTeSenderAddr
The source address used by this sender in this
session.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.4
hwRsvpTeSenderDestAddrLength
The length of the destination address in bits.
This is the CIDR Prefix Length, which for IP4
hosts and multicast addresses is 32 bits.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.5
hwRsvpTeSenderAddrLength
The length of the sender's address in bits.
This is the CIDR Prefix Length, which for IP4
hosts and multicast addresses is 32 bits.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.6
hwRsvpTeSenderHopAddr
The address used by the previous RSVP hop
(which may be the original sender).
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.7
hwRsvpTeSenderHopLih
The Logical Interface Handle used by the pre-
vious RSVP hop (which may be the original
sender).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.8
hwRsvpTeSenderInterface
The ifIndex value of the interface on which
this PATH message was most recently received.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.9
hwRsvpTeSenderTSpecRate
The Average Bit Rate of the sender's data
stream. Within a transmission burst, the ar-
rival rate may be as fast as hwRsvpTeSenderTSpec-
PeakRate (if supported by the service model);
however, averaged across…
bits per secondINTEGRATED-SERVICES-MIBBitRate
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.10
hwRsvpTeSenderTSpecPeakRate
The Peak Bit Rate of the sender's data stream.
Traffic arrival is not expected to exceed this
rate at any time, apart from the effects of
jitter in the network. If not specified in the
TSpec, this returns zero or …
bits per secondINTEGRATED-SERVICES-MIBBitRate
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.11
hwRsvpTeSenderTSpecBurst
The size of the largest burst expected from
the sender at a time.
bytesINTEGRATED-SERVICES-MIBBurstSize
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.12
hwRsvpTeSenderTSpecMinTu
The minimum message size for this flow. The
policing algorithm will treat smaller messages
as though they are this size.
INTEGRATED-SERVICES-MIBMessageSize
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.13
hwRsvpTeSenderTSpecMaxTu
The maximum message size for this flow. The
admission algorithm will reject TSpecs whose
Maximum Transmission Unit, plus the interface
headers, exceed the interface MTU.
INTEGRATED-SERVICES-MIBMessageSize
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.14
hwRsvpTeSenderInterval
The interval between refresh messages as ad-
vertised by the previous hop.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.15
hwRsvpTeSenderRsvpHop
If TRUE, the node believes that the previous
IP hop is an RSVP hop. If FALSE, the node be-
lieves that the previous IP hop may not be an
RSVP hop.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.16
hwRsvpTeSenderPolicy
The contents of the policy object, displayed
as an uninterpreted string of octets, including
the object header. In the absence of such an
object, this should be of zero length.
OctetString
Constraints:
range: 0-65532
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.17
hwRsvpTeSenderAdspecBreak
The global break bit general characterization
parameter from the ADSPEC. If TRUE, at least
one non-IS hop was detected in the path. If
FALSE, no non-IS hops were detected.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.18
hwRsvpTeSenderAdspecHopCount
The hop count general characterization parame-
ter from the ADSPEC. A return of zero or
noSuchValue indicates one of the following con-
ditions:

the invalid bit was set
the parameter was not …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.19
hwRsvpTeSenderAdspecPathBw
The path bandwidth estimate general character-
ization parameter from the ADSPEC. A return of
zero or noSuchValue indicates one of the fol-
lowing conditions:

the invalid bit was set
the paramete…
bits per secondINTEGRATED-SERVICES-MIBBitRate
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.20
hwRsvpTeSenderAdspecMinLatency
The minimum path latency general characteriza-
tion parameter from the ADSPEC. A return of
zero or noSuchValue indicates one of the fol-
lowing conditions:

the invalid bit was set
the paramete…
microsecondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.21
hwRsvpTeSenderAdspecMtu
The composed Maximum Transmission Unit general
characterization parameter from the ADSPEC. A
return of zero or noSuchValue indicates one of
the following conditions:

the invalid bit was set
the p…
bytesSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.22
hwRsvpTeSenderAdspecGuaranteedSvc
If TRUE, the ADSPEC contains a Guaranteed Ser-
vice fragment. If FALSE, the ADSPEC does not
contain a Guaranteed Service fragment.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.23
hwRsvpTeSenderAdspecGuaranteedBreak
If TRUE, the Guaranteed Service fragment has
its 'break' bit set, indicating that one or
more nodes along the path do not support the
guaranteed service. If FALSE, and hwRsvpTe-
SenderAdspecGuaranteedSvc i…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.24
hwRsvpTeSenderAdspecGuaranteedCtot
If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, this
is the end-to-end composed value for the
guaranteed service 'C' parameter. A return of
zero or noSuchValue indicates one of the fol-
lowing conditions:
…
bytesSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.25
hwRsvpTeSenderAdspecGuaranteedDtot
If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, this
is the end-to-end composed value for the
guaranteed service 'D' parameter. A return of
zero or noSuchValue indicates one of the fol-
lowing conditions:
…
microsecondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.26
hwRsvpTeSenderAdspecGuaranteedCsum
If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, this
is the composed value for the guaranteed ser-
vice 'C' parameter since the last reshaping
point. A return of zero or noSuchValue indi-
cates one of the followi…
bytesSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.27
hwRsvpTeSenderAdspecGuaranteedDsum
If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, this
is the composed value for the guaranteed ser-
vice 'D' parameter since the last reshaping
point. A return of zero or noSuchValue indi-
cates one of the followi…
microsecondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.28
hwRsvpTeSenderAdspecGuaranteedHopCount
If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, this
is the service-specific override of the hop
count general characterization parameter from
the ADSPEC. A return of zero or noSuchValue
indicates one of the fol…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.29
hwRsvpTeSenderAdspecGuaranteedPathBw
If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, this
is the service-specific override of the path
bandwidth estimate general characterization
parameter from the ADSPEC. A return of zero or
noSuchValue indicates on…
bits per secondINTEGRATED-SERVICES-MIBBitRate
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.30
hwRsvpTeSenderAdspecGuaranteedMinLatency
If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, this
is the service-specific override of the minimum
path latency general characterization parameter
from the ADSPEC. A return of zero or noSuch-
Value indicates one of …
microsecondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.31
hwRsvpTeSenderAdspecGuaranteedMtu
If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, this
is the service-specific override of the com-
posed Maximum Transmission Unit general charac-
terization parameter from the ADSPEC. A return
of zero or noSuchValue …
bytesSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.32
hwRsvpTeSenderAdspecCtrlLoadSvc
If TRUE, the ADSPEC contains a Controlled Load
Service fragment. If FALSE, the ADSPEC does
not contain a Controlled Load Service frag-
ment.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.33
hwRsvpTeSenderAdspecCtrlLoadBreak
If TRUE, the Controlled Load Service fragment
has its 'break' bit set, indicating that one or
more nodes along the path do not support the
controlled load service. If FALSE, and
hwRsvpTeSenderAdspecCtrlLoad…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.34
hwRsvpTeSenderAdspecCtrlLoadHopCount
If hwRsvpTeSenderAdspecCtrlLoadSvc is TRUE, this
is the service-specific override of the hop
count general characterization parameter from
the ADSPEC. A return of zero or noSuchValue
indicates one of the fol…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.35
hwRsvpTeSenderAdspecCtrlLoadPathBw
If hwRsvpTeSenderAdspecCtrlLoadSvc is TRUE, this
is the service-specific override of the path
bandwidth estimate general characterization
parameter from the ADSPEC. A return of zero or
noSuchValue indicates on…
bits per secondINTEGRATED-SERVICES-MIBBitRate
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.36
hwRsvpTeSenderAdspecCtrlLoadMinLatency
If hwRsvpTeSenderAdspecCtrlLoadSvc is TRUE, this
is the service-specific override of the minimum
path latency general characterization parameter
from the ADSPEC. A return of zero or noSuch-
Value indicates one of …
microsecondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.37
hwRsvpTeSenderAdspecCtrlLoadMtu
If hwRsvpTeSenderAdspecCtrlLoadSvc is TRUE, this
is the service-specific override of the com-
posed Maximum Transmission Unit general charac-
terization parameter from the ADSPEC. A return
of zero or noSuchValue …
bytesSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.38
hwRsvpTeSenderTtl
The TTL value in the RSVP header that was last
received.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.39
hwRsvpTeLspId
A 16-bit identifier used in the SENDER_TEMPLATE
and the FILTER_SPEC that can be changed to
allow a sender to share resources with itself.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.40
hwRsvpTeSenderMsgIdSndFlag
Indicates that the message sender requests the
peer to send an acknowledgment for the message.
(0x01: ACK desired.)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.41
hwRsvpTeSenderMsgIdSndEpoch
A value that indicates when the Message_Identi-
fier sequence has been reset.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.42
hwRsvpTeSenderMsgIdSndNumber
When combined with the message generator's IP
address, the Message_Identifier field uniquely
identifies a message. The values placed in this
field change incrementally and only decrease
when the Epoch changes or wh…
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.43
hwRsvpTeSenderMsgIdRcvFlag
The message ID flag of the message latest received.
It is used to identify whether ACK is desired or
not. And it can be extended. (0x01: ACK desired.)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.44
hwRsvpTeSenderMsgIdRcvEpoch
The message ID epoch of the message latest
received form the interface.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.45
hwRsvpTeSenderMsgIdRcvNumber
The message ID number of the message latest
received form the interface. A return of 0
indicates the absence of the MESSAGE_ID
object received.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.46
hwRsvpTeSenderClassType
Indicates the class-type. A return of zero
indicates the absence of the object.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.47
hwRsvpTeSenderLabelRequestCtype
The type of label request (without label range,
with ATM label range, with frame relay label
range, etc).
Enumeration
Enumerated Values:
1withoutLabelRange
2withAtmLabelRange
3withFrameRelayLabelRange
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.48
hwRsvpTeSenderLabelRequestL3pid
An identifier of the layer 3 protocol using
this path. Standard Ethertype values are used.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.49
hwRsvpTeSenderLabelRequestAtmMinVpi
This 12 bit field specifies the lower bound of
a block of Virtual Path Identifiers that is
supported on the originating switch. If the VPI
is less than 12-bits it must be right justified
in this field and preceding…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.50
hwRsvpTeSenderLabelRequestAtmMinVci
This 16 bit field specifies the lower bound of
a block of Virtual Connection Identifiers that
is supported on the originating switch. If the
VCI is less than 16-bits it must be right
justified in this field and pre…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.51
hwRsvpTeSenderLabelRequestAtmMaxVpi
This 12 bit field specifies the upper bound of
a block of Virtual Path Identifiers that is
supported on the originating switch. If the
VPI is less than 12-bits it must be right
justified in this field and preceding…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.52
hwRsvpTeSenderLabelRequestAtmMaxVci
This 16 bit field specifies the upper bound of
a block of Virtual Connection Identifiers that
is supported on the originating switch. If the
VCI is less than 16-bits it must be right
justified in this field and pre…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.53
hwRsvpTeSenderLabelRequestFrMinDlci
This 23-bit field specifies the lower bound of
a block of Data Link Connection Identifiers
(DLCIs) that is supported on the originating
switch. The DLCI must be right justified in
this field and unused bits must be…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.54
hwRsvpTeSenderLabelRequestFrMaxDlci
This 23-bit field specifies the upper bound of
a block of Data Link Connection Identifiers
(DLCIs) that is supported on the originating
switch. The DLCI must be right justified in
this field and unused bits must be…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.55
hwRsvpTeSenderSessionAttrType
The type of the session_attribute (without
resource affinities or with resource affinities).
Enumeration
Enumerated Values:
1withRa
7withoutRa
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.56
hwRsvpTeSenderSessionAttrSetupPrio
The priority of the session with respect to
taking resources, in the range of 0 to 7. The
value 0 is the highest priority. The Setup
Priority is used in deciding whether this
session can preempt another session. Th…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.57
hwRsvpTeSenderSessionAttrHoldPrio
The priority of the session with respect to
holding resources, in the range of 0 to 7. The
value 0 is the highest priority. Holding
Priority is used in deciding whether this
session can be preempted by another sess…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.58
hwRsvpTeSenderSessionAttrFlag
A mixed value. (0x01: Local protection desired;
0x02: Label recording desired; 0x04: SE Style
desired; 0x08: bandwidth protection desired;
0x10: node protection desired; 0x20: Path
re-evaluation request; 0x40: Soft pr…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.59
hwRsvpTeSenderSessionAttrName
Session name, a null padded string of characters.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.60
hwRsvpTeSenderSessionAttrExcludeAny
A 32-bit vector representing a set of attribute
filters associated with a tunnel any of which
renders a link unacceptable.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.61
hwRsvpTeSenderSessionAttrIncludeAny
A 32-bit vector representing a set of attribute
filters associated with a tunnel any of which
renders a link acceptable (with respect to this
test). A null set (all bits set to zero)
automatically passes.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.62
hwRsvpTeSenderSessionAttrIncludeAll
A 32-bit vector representing a set of attribute
filters associated with a tunnel all of which
must be present for a link to be acceptable
(with respect to this test). A null set (all
bits set to zero) automatically …
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.63
hwRsvpTeSenderFrrSetupPrio
The priority of the backup path with respect to
taking resources, in the range 0 to 7. The
value 0 is the highest priority. Setup Priority
is used in deciding whether this session can
preempt another session. See […
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.64
hwRsvpTeSenderFrrHoldPrio
The priority of the backup path with respect to
holding resources, in the range 0 to 7. The
value 0 is the highest priority. Holding
Priority is used in deciding whether this
session can be preempted by another ses…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.65
hwRsvpTeSenderFrrHopLimit
The maximum number of extra hops the backup path
is allowed to take, from current node (a PLR)
to an MP, with PLR and MP excluded from the count.
For example, hop-limit of 0 means that only
direct links between PLR a…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.66
hwRsvpTeSenderFrrFlag
An enumerable value to indicate the protection
schema desired (0x01, One-to-One Backup Desired;
0x02, Facility Backup Desired; 0x03, No Backup
Desired).
Enumeration
Enumerated Values:
1oneToOneDesired
2facilityDesired
3noBackupDesired
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.67
hwRsvpTeSenderFrrBandwidth
Bandwidth estimate; 32-bit IEEE floating point
integer, in bits per second.
bits per secondINTEGRATED-SERVICES-MIBBitRate
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.68
hwRsvpTeSenderFrrExcludeAny
A 32-bit vector representing a set of attribute
filters associated with a backup path, any of
which renders a link unacceptable.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.69
hwRsvpTeSenderFrrIncludeAny
A 32-bit vector representing a set of attribute
filters associated with a backup path, any of
which renders a link acceptable (with respect
to this test). A null set (all bits set to zero)
automatically passes.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.70
hwRsvpTeSenderFrrIncludeAll
A 32-bit vector representing a set of attribute
filters associated with a backup path, all of
which must be present for a link to be
acceptable (with respect to this test). A null
set (all bits set to zero) automatic…
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.71
hwRsvpTeSenderFrrInuseFlag
An enumerable value to indicate the fast-reroute
state of this sender (normal, PLR in use, MP in
use, PLR in use and MP in use, under protection).
Enumeration
Enumerated Values:
1normal
2plrInUse
3mpInUse
4plrAndMpInUse
5underProtection
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.72
hwRsvpTeSenderDiffServPsc
This 16 bits field indicates a PHB Scheduling
Class to be supported by the LSP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.2.1.73

hwRsvpTeResvTable

table
.1.3.6.1.4.1.2011.5.25.148.1.3 · 1 row entry · 25 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwRsvpTeResvTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-RSVPTE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-RSVPTE-MIB::hwRsvpTeResvTable' 
Information describing the  state  information
displayed by receivers in RESV messages.
hwRsvpTeResvEntry row .1.3.6.1.4.1.2011.5.25.148.1.3.1
Information describing the state information
displayed by a single receiver's RESV message
concerning a single sender.
Indexes
Column Syntax OID
hwRsvpTeResvNumber
The number of this reservation request. This
is for SNMP Indexing purposes only and has no
relation to any protocol value.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.3.1.1
hwRsvpTeResvType
The type of session (IP4, IP6, IP6 with flow
information, etc).
INTEGRATED-SERVICES-MIBSessionType
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.2011.5.25.148.1.3.1.2
hwRsvpTeResvDestAddr
The destination address used by all senders in
this session.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.5.25.148.1.3.1.3
hwRsvpTeResvSenderAddr
The source address of the sender selected by
this reservation. The value of all zeroes in-
dicates 'all senders'.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.5.25.148.1.3.1.4
hwRsvpTeResvDestAddrLength
The length of the destination address in bits.
This is the CIDR Prefix Length, which for IP4
hosts and multicast addresses is 32 bits.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.3.1.5
hwRsvpTeResvSenderAddrLength
The length of the sender's address in bits.
This is the CIDR Prefix Length, which for IP4
hosts and multicast addresses is 32 bits.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.3.1.6
hwRsvpTeResvHopAddr
The address used by the next RSVP hop (which
may be the ultimate receiver).
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.5.25.148.1.3.1.7
hwRsvpTeResvHopLih
The Logical Interface Handle received from the
previous RSVP hop (which may be the ultimate
receiver).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.3.1.8
hwRsvpTeResvInterface
The ifIndex value of the interface on which
this RESV message was most recently received.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.3.1.9
hwRsvpTeResvService
The QoS Service classification requested by
the receiver.
INTEGRATED-SERVICES-MIBQosService
Type Values:
1bestEffort
2guaranteedDelay
5controlledLoad
 .1.3.6.1.4.1.2011.5.25.148.1.3.1.10
hwRsvpTeResvTSpecRate
The Average Bit Rate of the sender's data
stream. Within a transmission burst, the ar-
rival rate may be as fast as hwRsvpTeResvTSpec-
PeakRate (if supported by the service model);
however, averaged across…
bits per secondINTEGRATED-SERVICES-MIBBitRate
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.3.1.11
hwRsvpTeResvTSpecPeakRate
The Peak Bit Rate of the sender's data stream.
Traffic arrival is not expected to exceed this
rate at any time, apart from the effects of
jitter in the network. If not specified in the
TSpec, this returns zero or …
bits per secondINTEGRATED-SERVICES-MIBBitRate
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.3.1.12
hwRsvpTeResvTSpecBurst
The size of the largest burst expected from
the sender at a time.

If this is less than the sender's advertised
burst size, the receiver is asking the network
to provide flow pacing beyond what w…
bytesINTEGRATED-SERVICES-MIBBurstSize
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.3.1.13
hwRsvpTeResvTSpecMinTu
The minimum message size for this flow. The
policing algorithm will treat smaller messages
as though they are this size.
INTEGRATED-SERVICES-MIBMessageSize
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.3.1.14
hwRsvpTeResvTSpecMaxTu
The maximum message size for this flow. The
admission algorithm will reject TSpecs whose
Maximum Transmission Unit, plus the interface
headers, exceed the interface MTU.
INTEGRATED-SERVICES-MIBMessageSize
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.3.1.15
hwRsvpTeResvRSpecRate
If the requested service is guaranteed, as
specified by hwRsvpTeResvService, this is the
clearing rate that is being requested. Other-
wise, it is zero, or the agent may return
noSuchValue.
bits per secondINTEGRATED-SERVICES-MIBBitRate
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.3.1.16
hwRsvpTeResvRSpecSlack
If the requested service is guaranteed, as
specified by hwRsvpTeResvService, this is the delay
slack. Otherwise, it is zero, or the agent may
return noSuchValue.
microsecondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.3.1.17
hwRsvpTeResvInterval
The interval between refresh messages as ad-
vertised by the Next Hop.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.3.1.18
hwRsvpTeResvScope
The contents of the scope object, displayed as
an uninterpreted string of octets, including
the object header. In the absence of such an
object, this should be of zero length.

If the length is non…
OctetString
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.5.25.148.1.3.1.19
hwRsvpTeResvShared
If TRUE, a reservation shared among senders is
requested. If FALSE, a reservation specific to
this sender is requested.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.148.1.3.1.20
hwRsvpTeResvExplicit
If TRUE, individual senders are listed using
Filter Specifications. If FALSE, all senders
are implicitly selected. The Scope Object will
contain a list of senders that need to receive
this reservation request fo…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.148.1.3.1.21
hwRsvpTeResvRsvpHop
If TRUE, the node believes that the previous
IP hop is an RSVP hop. If FALSE, the node be-
lieves that the previous IP hop may not be an
RSVP hop.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.148.1.3.1.22
hwRsvpTeResvPolicy
The contents of the policy object, displayed
as an uninterpreted string of octets, including
the object header. In the absence of such an
object, this should be of zero length.
OctetString
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.5.25.148.1.3.1.23
hwRsvpTeResvTtl
The TTL value in the RSVP header that was last
received.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.3.1.24
hwRsvpTeResvConfirm
Receiver's address.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.5.25.148.1.3.1.25

hwRsvpTeResvFwdTable

table
.1.3.6.1.4.1.2011.5.25.148.1.4 · 1 row entry · 27 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwRsvpTeResvFwdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-RSVPTE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-RSVPTE-MIB::hwRsvpTeResvFwdTable' 
Information describing the  state  information
displayed upstream in RESV messages.
hwRsvpTeResvFwdEntry row .1.3.6.1.4.1.2011.5.25.148.1.4.1
Information describing the state information
displayed upstream in an RESV message concern-
ing a single sender.
Indexes
Column Syntax OID
hwRsvpTeResvFwdNumber
The number of this reservation request. This
is for SNMP Indexing purposes only and has no
relation to any protocol value.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.4.1.1
hwRsvpTeResvFwdType
The type of session (IP4, IP6, IP6 with flow
information, etc).
INTEGRATED-SERVICES-MIBSessionType
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.2011.5.25.148.1.4.1.2
hwRsvpTeResvFwdDestAddr
The destination address used by all senders in
this session.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.5.25.148.1.4.1.3
hwRsvpTeResvFwdSenderAddr
The source address of the sender selected by
this reservation. The value of all zeroes in-
dicates 'all senders'.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.5.25.148.1.4.1.4
hwRsvpTeResvFwdDestAddrLength
The length of the destination address in bits.
This is the CIDR Prefix Length, which for IP4
hosts and multicast addresses is 32 bits.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.4.1.5
hwRsvpTeResvFwdSenderAddrLength
The length of the sender's address in bits.
This is the CIDR Prefix Length, which for IP4
hosts and multicast addresses is 32 bits.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.4.1.6
hwRsvpTeResvFwdHopAddr
The address of the (previous) RSVP that will
receive this message.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.5.25.148.1.4.1.7
hwRsvpTeResvFwdHopLih
The Logical Interface Handle sent to the (pre-
vious) RSVP that will receive this message.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.4.1.8
hwRsvpTeResvFwdInterface
The ifIndex value of the interface on which
this RESV message was most recently sent.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.4.1.9
hwRsvpTeResvFwdService
The QoS Service classification requested.
INTEGRATED-SERVICES-MIBQosService
Type Values:
1bestEffort
2guaranteedDelay
5controlledLoad
 .1.3.6.1.4.1.2011.5.25.148.1.4.1.10
hwRsvpTeResvFwdTSpecRate
The Average Bit Rate of the sender's data
stream. Within a transmission burst, the ar-
rival rate may be as fast as hwRsvpTeResvFwdT-
SpecPeakRate (if supported by the service
model);however, averaged across…
bits per secondINTEGRATED-SERVICES-MIBBitRate
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.4.1.11
hwRsvpTeResvFwdTSpecPeakRate
The Peak Bit Rate of the sender's data stream
Traffic arrival is not expected to exceed this
rate at any time, apart from the effects of
jitter in the network. If not specified in the
TSpec, this returns zero or …
bits per secondINTEGRATED-SERVICES-MIBBitRate
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.4.1.12
hwRsvpTeResvFwdTSpecBurst
The size of the largest burst expected from
the sender at a time.

If this is less than the sender's advertised
burst size, the receiver is asking the network
to provide flow pacing beyond what w…
bytesINTEGRATED-SERVICES-MIBBurstSize
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.4.1.13
hwRsvpTeResvFwdTSpecMinTu
The minimum message size for this flow. The
policing algorithm will treat smaller messages
as though they are this size.
INTEGRATED-SERVICES-MIBMessageSize
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.4.1.14
hwRsvpTeResvFwdTSpecMaxTu
The maximum message size for this flow. The
admission algorithm will reject TSpecs whose
Maximum Transmission Unit, plus the interface
headers, exceed the interface MTU.
INTEGRATED-SERVICES-MIBMessageSize
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.4.1.15
hwRsvpTeResvFwdRSpecRate
If the requested service is Guaranteed, as
specified by hwRsvpTeResvService, this is the
clearing rate that is being requested. Other-
wise, it is zero, or the agent may return
noSuchValue.
bytes per secondINTEGRATED-SERVICES-MIBBitRate
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.4.1.16
hwRsvpTeResvFwdRSpecSlack
If the requested service is Guaranteed, as
specified by hwRsvpTeResvService, this is the delay
slack. Otherwise, it is zero, or the agent may
return noSuchValue.
microsecondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.4.1.17
hwRsvpTeResvFwdInterval
The interval between refresh messages adver-
tised to the Previous Hop.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.4.1.18
hwRsvpTeResvFwdScope
The contents of the scope object, displayed as
an uninterpreted string of octets, including
the object header. In the absence of such an
object, this should be of zero length.
OctetString
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.5.25.148.1.4.1.19
hwRsvpTeResvFwdShared
If TRUE, a reservation shared among senders is
requested. If FALSE, a reservation specific to
this sender is requested.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.148.1.4.1.20
hwRsvpTeResvFwdExplicit
If TRUE, individual senders are listed using
Filter Specifications. If FALSE, all senders
are implicitly selected. The Scope Object will
contain a list of senders that need to receive
this reservation request fo…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.148.1.4.1.21
hwRsvpTeResvFwdRsvpHop
If TRUE, the node believes that the next IP
hop is an RSVP hop. If FALSE, the node be-
lieves that the next IP hop may not be an RSVP
hop.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.148.1.4.1.22
hwRsvpTeResvFwdPolicy
The contents of the policy object, displayed
as an uninterpreted string of octets, including
the object header. In the absence of such an
object, this should be of zero length.
OctetString
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.5.25.148.1.4.1.23
hwRsvpTeResvFwdTtl
The TTL value in the RSVP header that was last
received.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.4.1.24
hwRsvpTeResvFwdMsgIdFlag
Indicates that the message sender requests the
peer to send an acknowledgment for the message.
(0x01: ACK desired.)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.4.1.25
hwRsvpTeResvFwdMsgIdEpoch
A value that indicates when the Message_Identi-
fier sequence has been reset.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.4.1.26
hwRsvpTeResvFwdMsgIdNumber
When combined with the message generator's IP
address, the Message_Identifier field uniquely
identifies a message. The values placed in this
field change incrementally and only decrease
when the epoch changes or wh…
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.4.1.27

hwRsvpTeIfTable

table
.1.3.6.1.4.1.2011.5.25.148.1.5 · 1 row entry · 23 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwRsvpTeIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-RSVPTE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-RSVPTE-MIB::hwRsvpTeIfTable' 
The RSVP-specific attributes of  the  system's
interfaces.
hwRsvpTeIfEntry row .1.3.6.1.4.1.2011.5.25.148.1.5.1
The RSVP-specific attributes of the a given
interface.
Indexes
Column Syntax OID
hwRsvpTeIfUdpNbrs
The number of neighbors perceived to be using
only the RSVP UDP Encapsulation.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.5.1.1
hwRsvpTeIfIpNbrs
The number of neighbors perceived to be using
only the RSVP IP Encapsulation.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.5.1.2
hwRsvpTeIfNbrs
The number of neighbors currently perceived;
this will exceed hwRsvpTeIfIpNbrs + hwRsvpTeIfUdpNbrs
by the number of neighbors using both encapsu-
lations.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.5.1.3
hwRsvpTeIfRefreshBlockadeMultiple
The value of the RSVP value 'Kb', Which is the
minimum number of refresh intervals that
blockade state will last once entered.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.5.1.4
hwRsvpTeIfRefreshMultiple
The value of the RSVP value 'K', which is the
number of refresh intervals which must elapse
(minimum) before a PATH or RESV message which
is not being refreshed will be aged out.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.5.1.5
hwRsvpTeIfTtl
The value of SEND_TTL used on this interface
for messages this node originates. If set to
zero, the node determines the TTL via other
means.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.5.1.6
hwRsvpTeIfRefreshInterval
The value of the RSVP value 'R', which is the
minimum period between refresh transmissions of
a given PATH or RESV message on an interface.
The default value is 30000.
millisecondsSNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
 .1.3.6.1.4.1.2011.5.25.148.1.5.1.7
hwRsvpTeIfRouteDelay
The approximate period from the time a route
is changed to the time a resulting message ap-
pears on the interface. The default value is 200.
hundredths of a secondSNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
 .1.3.6.1.4.1.2011.5.25.148.1.5.1.8
hwRsvpTeIfEnabled
Its value is always TRUE, if RSVP is enabled
on this Interface.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.148.1.5.1.9
hwRsvpTeIfUdpRequired
If TRUE, manual configuration forces the use
of UDP encapsulation on the interface. If
FALSE, UDP encapsulation is only used if hwRsvpTeI-
fUdpNbrs is not zero.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.148.1.5.1.10
hwRsvpTeIfStatus
'active' on interfaces that are configured for
RSVP.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.148.1.5.1.11
hwRsvpTeIfHelloEnabled
If TRUE, RSVPTE hello is enabled on this
Interface. If FALSE, RSVPTE hello is not
enabled on this interface
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.148.1.5.1.12
hwRsvpTeIfSrefreshEnabled
If TRUE, srefresh is enabled on this interface.
If FALSE, srefresh is not enabled on this
interface.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.148.1.5.1.13
hwRsvpTeIfSrefreshInterval
The srefresh interval. I.e. time difference
between 2 refreshes. The default value is 30000.
millisecondsSNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
 .1.3.6.1.4.1.2011.5.25.148.1.5.1.14
hwRsvpTeIfRetranIncDelta
Delta governs the speed with which the sender
increases the retransmission interval. The
ratio of two successive retransmission intervals
is (1 + Delta).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.5.1.15
hwRsvpTeIfRetranInterval
The retransmission interval. The default value
is 5000.
millisecondsSNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
 .1.3.6.1.4.1.2011.5.25.148.1.5.1.16
hwRsvpTeIfAuthEnabled
If TRUE, authentication is enabled on this
interface. If FALSE, authentication is not
enabled on this interface.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.148.1.5.1.17
hwRsvpTeIfAuthEncrypted
This states that authentication key is encrypted
or not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.148.1.5.1.18
hwRsvpTeIfAuthHandshake
Handshaking is enabled authentications.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.148.1.5.1.19
hwRsvpTeIfAuthLifeTime
Authentication life time. The default value is
1800000.
millisecondsSNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
 .1.3.6.1.4.1.2011.5.25.148.1.5.1.20
hwRsvpTeIfAuthKey
Authentication key, used for authentication
processing. For security purposes, a get on
this returns a zero length string.
OctetString
Constraints:
range: 0-392
 .1.3.6.1.4.1.2011.5.25.148.1.5.1.21
hwRsvpTeIfWindowSize
Administrators can specify a message window
corresponding to the worst case reordering
behavior. For example, one might specify that
packets reordered within a 32 message window
would be accepted. If no reordering…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.5.1.22
hwRsvpTeIfAuthType
Authentication type of RSVP-TE interface,
null (1): authentication is not configured.
md5 (2): authentication type is md5.
keychain (3): authentication type is keychain.
The default value is 1.
Enumeration
Enumerated Values:
1null
2md5
3keychain
 .1.3.6.1.4.1.2011.5.25.148.1.5.1.23

hwRsvpTeNbrTable

table
.1.3.6.1.4.1.2011.5.25.148.1.6 · 1 row entry · 17 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwRsvpTeNbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-RSVPTE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-RSVPTE-MIB::hwRsvpTeNbrTable' 
Information describing  the  Neighbors  of  an
RSVP system.
hwRsvpTeNbrEntry row .1.3.6.1.4.1.2011.5.25.148.1.6.1
Information describing a single RSVP Neigh-
bor.
Indexes
Column Syntax OID
hwRsvpTeNbrAddress
The IP4 or IP6 Address used by this neighbor.
This object may not be changed when the value
of the RowStatus object is 'active'.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.5.25.148.1.6.1.1
hwRsvpTeNbrProtocol
The encapsulation being used by this neigh-
bor.
Enumeration
Enumerated Values:
1ip
2udp
3both
 .1.3.6.1.4.1.2011.5.25.148.1.6.1.2
hwRsvpTeNbrStatus
'active' for all neighbors. This object may
be used to configure neighbors. In the pres-
ence of configured neighbors, the implementa-
tion may (but is not required to) limit the set
of valid neighbors to those …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.148.1.6.1.3
hwRsvpTeNbrSendersNumber
The number of senders on the neighbor.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.6.1.4
hwRsvpTeNbrReceiversNumber
The number of receivers on the neighbor.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.6.1.5
hwRsvpTeNbrHelloEnabled
If TRUE, hello is enabled on the neighbor.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.148.1.6.1.6
hwRsvpTeNbrHelloSrcInstance
Source instance of the neighbor.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.6.1.7
hwRsvpTeNbrHelloDstInstance
Destination instance of the neighbor.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.6.1.8
hwRsvpTeNbrHelloLostCounter
The number of times the hello messages have been
sent to the neighbor for which hello ACK has
not received yet.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.6.1.9
hwRsvpTeNbrHelloType
Hello type that is being sent to the neighbor.
A return of 3[none] indicates that hello is
disabled on the nbr.
Enumeration
Enumerated Values:
1request
2ack
3none
 .1.3.6.1.4.1.2011.5.25.148.1.6.1.10
hwRsvpTeNbrGrCapability
Gives neighbor capability to support GR or
undergo GR, in case of control plane restart.
A mixed value. (0x01: Self GR capability of
neighbor; 0x02: GR support capability of
neighbor; 0x04: Neighbor capable of receiv…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.6.1.11
hwRsvpTeNbrGrRestartTime
Neighbor nodes GR restart time value.
millisecondsSNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.2011.5.25.148.1.6.1.12
hwRsvpTeNbrGrRecoveryTime
Neighbor nodes GR recovery time value.
millisecondsSNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.2011.5.25.148.1.6.1.13
hwRsvpTeNbrGrStatus
Neighbor nodes GR status. (0x01, No GR activity;
0x02, Neighbor router is supporting GR; 0x03,
Neighbor router is restarting; 0x04, Restart
timer is running; 0x05, Recovery timer is
running; 0x06, Neighbor GR end.)
Enumeration
Enumerated Values:
1normal
2supporting
3restarting
4restartTimerRunning
5recoveryTimerRunning
6grEnd
 .1.3.6.1.4.1.2011.5.25.148.1.6.1.14
hwRsvpTeNbrAuthKeyId
Neighbor's authentication key, used for
authentication processing. A return of null
string indicates the absence of the item.
For security purposes, a get on this returns
a zero length string.
OctetString
Constraints:
range: 6-6
range: 0-0
 .1.3.6.1.4.1.2011.5.25.148.1.6.1.15
hwRsvpTeNbrReductionEnabled
If TRUE srefresh is enabled on the neighbor,
else srefresh is not enabled on the neighbor.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.148.1.6.1.16
hwRsvpTeNbrReliabilityEnabled
If TRUE reliability is enabled on the neighbor,
else reliability is not enabled on the neighbor.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.148.1.6.1.17

hwRsvpTeMessageIdTable

table
.1.3.6.1.4.1.2011.5.25.148.1.7 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwRsvpTeMessageIdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-RSVPTE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-RSVPTE-MIB::hwRsvpTeMessageIdTable' 
Information describes the MessageIds of an 
RSVP system.
hwRsvpTeMessageIdEntry row .1.3.6.1.4.1.2011.5.25.148.1.7.1
Information describes the MessageIds of an
RSVP system.
Indexes
Column Syntax OID
hwRsvpTeMessageIdEpoch
A value that indicates when the Message_Identi-
fier sequence has been reset.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.7.1.1
hwRsvpTeMessageIdNumber
When combined with the message generator's IP
address, the Message_Identifier field uniquely
identifies a message. The values placed in this
field change incrementally and only decrease
when the epoch changes or wh…
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.7.1.2
hwRsvpTeMessageIdFlag
A enumerable value to indicate the type of this
Message_Identifier. (1: SenderIncoming; 2:
SenderOutgoing; 3: Resv; 4: ResvFwd; 5: RtBuff)
Enumeration
Enumerated Values:
1senderIncoming
2senderOutgoing
3resv
4resvFwd
5rtBuff
 .1.3.6.1.4.1.2011.5.25.148.1.7.1.3

hwRsvpTeFilterSpecTable

table
.1.3.6.1.4.1.2011.5.25.148.1.8 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwRsvpTeFilterSpecTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-RSVPTE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-RSVPTE-MIB::hwRsvpTeFilterSpecTable' 
Information describes the FilterSpecs of an 
RSVP system.
hwRsvpTeFilterSpecEntry row .1.3.6.1.4.1.2011.5.25.148.1.8.1
Information describes the FilterSpecs of an
RSVP system.
Indexes
Column Syntax OID
hwRsvpTeFilterSpecNumber
The number of this Filter_Spec. This is for
SNMP Indexing purposes only and has no relation
to any protocol value.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.8.1.1
hwRsvpTeFilterSpecLspId
A 16-bit identifier used in the SENDER_TEMPLATE
and the FILTER_SPEC that can be changed to
allow a sender to share resources with itself.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.8.1.2
hwRsvpTeFilterSpecIngressLsrId
IP address for a sender node.
OctetString .1.3.6.1.4.1.2011.5.25.148.1.8.1.3
hwRsvpTeFilterSpecLabel
The value of the label arranged by next hop.
A return of 4294967295 indicates the absence
of the item.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.8.1.4

hwRsvpTeRroTable

table
.1.3.6.1.4.1.2011.5.25.148.1.9 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwRsvpTeRroTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-RSVPTE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-RSVPTE-MIB::hwRsvpTeRroTable' 
Information describes the RRO sub-objects of 
an RSVP system.
hwRsvpTeRroEntry row .1.3.6.1.4.1.2011.5.25.148.1.9.1
Information describes the RRO sub-objects of
an RSVP system.
Indexes
Column Syntax OID
hwRsvpTeRroNumber
The number of this RRO sub-object. This is
for SNMP Indexing purposes only and has no
relation to any protocol value.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.9.1.1
hwRsvpTeRroType
An enumerable value that indicates the type of
this sub-object. (0x01: IPv4 address; 0x02:
IPv6 address; 0x03: Label.)
Enumeration
Enumerated Values:
1ipv4
2ipv6
3label
 .1.3.6.1.4.1.2011.5.25.148.1.9.1.2
hwRsvpTeRroIpAddr
IP address for this sub-object if the type is
'IPv4 address' of 'IPv6 address'. A return of
null string indicates the absence of the item.
OctetString .1.3.6.1.4.1.2011.5.25.148.1.9.1.3
hwRsvpTeRroIpPrefixLen
IP prefix length for this sub-object if the
type is 'IPv4 address' of 'IPv6 address'. A
return of 0 indicates the absence of the
item.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.9.1.4
hwRsvpTeRroLabel
The value of the label if the type is 'Label'.
A return of 4294967295 indicates the absence
of the item.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.9.1.5
hwRsvpTeRroFlag
If hwRsvpTeRroType is IPv4 or IPv6, it is a
mixed value. (0x01: Local protection
available; 0x02: Local protection in use; 0x04:
bandwidth protection; 0x08: node protection;
0x10: preemption pending; 0x20: node ID.)…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.9.1.6

hwRsvpTeEroTable

table
.1.3.6.1.4.1.2011.5.25.148.1.10 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwRsvpTeEroTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-RSVPTE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-RSVPTE-MIB::hwRsvpTeEroTable' 
Information describes the ERO sub-objects 
of an RSVP system.
hwRsvpTeEroEntry row .1.3.6.1.4.1.2011.5.25.148.1.10.1
Information describes the ERO sub-objects
of an RSVP system.
Indexes
Column Syntax OID
hwRsvpTeEroNumber
The number of this ERO sub-object. This is for
SNMP Indexing purposes only and has no relation
to any protocol value.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.148.1.10.1.1
hwRsvpTeEroType
An enumerable value that indicates the type of
this sub-object. (0x01: IPv4 address; 0x02:
IPv6 address.)
Enumeration
Enumerated Values:
1ipv4
2ipv6
 .1.3.6.1.4.1.2011.5.25.148.1.10.1.2
hwRsvpTeEroIpAddr
IP address for this sub-object.
OctetString .1.3.6.1.4.1.2011.5.25.148.1.10.1.3
hwRsvpTeEroIpPrefixLen
IP prefix length for this sub-object.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.148.1.10.1.4

hwRsvpTePeerTable

table
.1.3.6.1.4.1.2011.5.25.148.1.13 · 1 row entry · 2 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwRsvpTePeerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-RSVPTE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-RSVPTE-MIB::hwRsvpTePeerTable' 
Information describing the configured Neighbors of an
RSVP system.
hwRsvpTePeerEntry row .1.3.6.1.4.1.2011.5.25.148.1.13.1
Information describing a single RSVP configured Neigh-
bor.
Indexes
Column Syntax OID
hwRsvpTePeerAddress
The IP4 Address used by this configured neighbor.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.148.1.13.1.1
hwRsvpTePeerAuthType
Authentication type of configured neighbor,
null (1): authentication is not configured.
md5 (2): authentication type is md5.
keychain (3): authentication type is keychain.
The default value is 1.
Enumeration
Enumerated Values:
1null
2md5
3keychain
 .1.3.6.1.4.1.2011.5.25.148.1.13.1.2