Standard view Table view

HUAWEI-RPR-MIB

        The HUAWEI-RPR-TRAP-MIB contains objects to
Monitor the RPR TRAPs.
        
*********************************
RPR TRAP
**********************************
 This RPR TRAP consists of the following TRAPs:
 1 :  hwRPRexcessReservedRateDefect
 2 :  hwRPRprotMisconfigDefect
 3 :  hwRPRtopoChange
 4 :  hwRPRtopoInvalidDefect
 5 :  hwRPRduplicateMacAddressDefect
 6 :  hwRPRtopoInstabilityDefect
 7 :  hwRPRtopoStabilityRestore
 8 :  hwRPRPhyIfEventTrap
 9 :  hwRPRLogicIfEventTrap

Source file: HUAWEI-RPR-MIB
Last revised: 9 Jan 2006, 00:00 UTC
Identity: hwRPR
Base OID: 1.3.6.1.4.1.2011.5.25.36

Imported Objects

HUAWEI-MIB	hwDatacomm
IEEE-802DOT17-RPR-MIB	rprIfCurrentStatus rprIfIndex rprIfRingOperModes rprIfWrapConfig RprSpan rprSpanId rprSpanIfIndex rprSpanTotalRingletReservedRate rprTopoImageEastProtectionStatus rprTopoImageIfIndex rprTopoImageMacAddress rprTopoImageRinglet0Hops rprTopoImageRinglet1Hops rprTopoImageStationIfIndex rprTopoImageStatus rprTopoImageWestProtectionStatus
IF-MIB	ifIndex ifName ifPhysAddress InterfaceIndex
SNMPv2-CONF	MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI	MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page)

Net-SNMP examples using the huawei MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity

/usr/bin/snmptranslate -Pud -Ir -On -m 'HUAWEI-RPR-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HUAWEI-RPR-MIB::hwRPR'

Walk the MIB subtree

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-RPR-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-RPR-MIB::hwRPR'

How SNMP, Net-SNMP, MIB paths, and variants work

Objects (16)

hwRPR		`.1.3.6.1.4.1.2011.5.25.36`
hwRPRObjects		`.1.3.6.1.4.1.2011.5.25.36.1`
hwRPRIfEventTable		`.1.3.6.1.4.1.2011.5.25.36.1.1`
hwRPRIfEventEntry	hwRPRLogicIfIndexhwRPRLogicIfSpanId	`.1.3.6.1.4.1.2011.5.25.36.1.1.1`
hwRPRLogicIfIndex	IF-MIBInterfaceIndex	`.1.3.6.1.4.1.2011.5.25.36.1.1.1.1`
hwRPRLogicIfSpanId	IEEE-802DOT17-RPR-MIBRprSpan	`.1.3.6.1.4.1.2011.5.25.36.1.1.1.2`
hwRPRLogicIfEvent	Enumeration	`.1.3.6.1.4.1.2011.5.25.36.1.1.1.3`
hwRPRPhyIfEvent	Enumeration	`.1.3.6.1.4.1.2011.5.25.36.1.1.1.4`
hwRPRIfConfigTable		`.1.3.6.1.4.1.2011.5.25.36.1.2`
hwRPRIfConfigEntry	hwRPRIfConfigIfIndex	`.1.3.6.1.4.1.2011.5.25.36.1.2.1`
hwRPRIfConfigIfIndex	IF-MIBInterfaceIndex	`.1.3.6.1.4.1.2011.5.25.36.1.2.1.1`
hwRPRLogicIfTotalBandWidth r/w	Enumeration	`.1.3.6.1.4.1.2011.5.25.36.1.2.1.2`
hwRPRTraps		`.1.3.6.1.4.1.2011.5.25.36.2`
hwRPRTrapConformance		`.1.3.6.1.4.1.2011.5.25.36.3`
hwRPRTrapCompliances		`.1.3.6.1.4.1.2011.5.25.36.3.1`
hwRPRTrapGroups		`.1.3.6.1.4.1.2011.5.25.36.3.2`

Dependencies (11) 5 direct · 6 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree

HUAWEI-RPR-MIBhuaweiselected
- HUAWEI-MIBhuawei1 symbol
  - SNMPv2-SMIrfcdefault fallback2 symbols
- IEEE-802DOT17-RPR-MIBrfcdefault fallback16 symbols
  - HC-PerfHist-TC-MIBrfc3 symbols
    - SNMPv2-SMIrfcshared5 symbols
    - SNMPv2-TCrfc1 symbol
      - SNMPv2-SMIrfcshared1 symbol
  - IF-MIBrfc2 symbols
    - IANAifType-MIBrfc1 symbol
      - SNMPv2-SMIrfcshared2 symbols
      - SNMPv2-TCrfcshared1 symbol
    - SNMPv2-CONFrfc3 symbols
      - SNMPv2-SMIrfcshared3 symbols
    - SNMPv2-MIBrfc1 symbol
      - SNMPv2-CONFrfcshared3 symbols
      - SNMPv2-SMIrfcshared7 symbols
      - SNMPv2-TCrfcshared3 symbols
    - SNMPv2-SMIrfcshared9 symbols
    - SNMPv2-TCrfcshared8 symbols
  - INET-ADDRESS-MIBrfc2 symbols
    - SNMPv2-SMIrfcshared3 symbols
    - SNMPv2-TCrfcshared1 symbol
  - SNMP-FRAMEWORK-MIBrfc1 symbol
    - SNMPv2-CONFrfcshared2 symbols
    - SNMPv2-SMIrfcshared4 symbols
    - SNMPv2-TCrfcshared1 symbol
  - SNMPv2-CONFrfcshared2 symbols
  - SNMPv2-SMIrfcshared6 symbols
  - SNMPv2-TCrfcshared5 symbols
- IF-MIBrfcdefault fallbackshared4 symbols
- SNMPv2-CONFrfcdefault fallbackshared3 symbols
- SNMPv2-SMIrfcdefault fallbackshared3 symbols

Dependency-first compile order

Conformance Groups (3)

hwRPRIfEventGroup	hwRPRLogicIfIndex hwRPRLogicIfSpanId hwRPRPhyIfEvent hwRPRLogicIfEvent provide RPRTRAP objects configuration information.	`.1.3.6.1.4.1.2011.5.25.36.3.2.1`
hwRPRTrapGroup	hwRPRexcessReservedRateDefect hwRPRprotMisconfigDefect hwRPRtopoChange hwRPRtopoInvalidDefect hwRPRduplicateMacAddressDefect hwRPRtopoInstabilityDefect hwRPRtopoStabilityRestore hwRPRPhyIfEventTrap hwRPRLogicIfEventTrap hwRPRNodeConErr hwRPRNodeConErrResume hwRPRNodeMisCabling hwRPRNodeMisCablingResume hwRPRMateErr hwRPRMateErrResume hwRPRLOS hwRPRLOSResume Required objects to provide RPRTRAP objects configuration information.	`.1.3.6.1.4.1.2011.5.25.36.3.2.2`
hwRPRIfConfigGroup	hwRPRLogicIfTotalBandWidth Description.	`.1.3.6.1.4.1.2011.5.25.36.3.2.3`

Compliance Statements (1)

OID .1.3.6.1.4.1.2011.5.25.36.3.1.1

The compliance statement for entities that implement
RPRTRAP on a router.

Required groups

mandatory	hwRPRIfEventGroup
mandatory	hwRPRTrapGroup

Notifications / Traps (17)

Name	OID	Description
hwRPRexcessReservedRateDefect IEEE-802DOT17-RPR-MIBrprSpanTotalRingletReservedRate	`.1.3.6.1.4.1.2011.5.25.36.2.1`	This defect indicates that the amount of reserved bandwidth on a ringlet exceeds the available LINK_RATE. When an excess reserved rate defect is present, a notification may be generated.
hwRPRNodeConErr IF-MIBifName	`.1.3.6.1.4.1.2011.5.25.36.2.10`	On RPR ring, to detect the connection, a kind of packet is send between neighbor RPR nodes, This kind of packet is SC(Single-Choke) packet, If a node cannot receive SC packet from neighbor node in KEEPALIVE time, then there is failure between the two nodes. When happened, auto protection is executed by software.!
hwRPRNodeConErrResume IF-MIBifName	`.1.3.6.1.4.1.2011.5.25.36.2.11`	On RPR ring, to detect the connection, a kind of packet is send between neighbor RPR nodes, This kind of packet is SC(Single-Choke) packet, If a node cannot receive SC packet from neighbor node in KEEPALIVE time, then there is failure between the two nodes. When failure is resumed , this notification is sent.!
hwRPRNodeMisCabling IF-MIBifName	`.1.3.6.1.4.1.2011.5.25.36.2.12`	Optical fiber is connected in error. i.e the east direction of one node is connected with east direction of another node, or the west direction of one node is connected with west direction of another node!
hwRPRNodeMisCablingResume IF-MIBifName	`.1.3.6.1.4.1.2011.5.25.36.2.13`	when phenomena that Optical fiber is connected in error disappears, this notification is sent!
hwRPRMateErr IF-MIBifName	`.1.3.6.1.4.1.2011.5.25.36.2.14`	In double RPR operating mode, east and west directions of one rpr node lay on two RPR cards, These two cards are internally conntected by Gigaibit-ethernet, which is called MATE interface. The RPR nodes cannot work normaly under condition of MATE error.!
hwRPRMateErrResume IF-MIBifName	`.1.3.6.1.4.1.2011.5.25.36.2.15`	In double RPR operating mode, east and west directions of one rpr node lay on two RPR cards, These two cards are internally conntected by Gigaibit-ethernet, which is called MATE interface. The RPR nodes cannot work normaly under condition of MATE error.when MATE error is resumed ,this notification is sent!
hwRPRLOS IF-MIBifName	`.1.3.6.1.4.1.2011.5.25.36.2.16`	On RPR physical layer, link connection is detected through physical singal. When can't receive physical singal, then local node from neighbor node, LOS(lost of signal) alarm is report, auto protection is executed by software.!
hwRPRLOSResume IF-MIBifName	`.1.3.6.1.4.1.2011.5.25.36.2.17`	On RPR physical layer, link connection is detected through physical singal. When can't receive physical singal, then local node from neighbor node, LOS(lost of signal) alarm is report, auto protection is executed by software.when LOS is resumed,this notification is sent
hwRPRprotMisconfigDefect IEEE-802DOT17-RPR-MIBrprIfWrapConfig IEEE-802DOT17-RPR-MIBrprIfRingOperModes	`.1.3.6.1.4.1.2011.5.25.36.2.2`	A critical severity defect that indicates the presence of mismatched-protection-configuration stations, based on the value returned by MismatchedProtection(). When a protection configuration defect is present on the station, a notification may be generated.
hwRPRtopoChange IEEE-802DOT17-RPR-MIBrprTopoImageStationIfIndex IEEE-802DOT17-RPR-MIBrprTopoImageStatus IEEE-802DOT17-RPR-MIBrprTopoImageWestProtectionStatus IEEE-802DOT17-RPR-MIBrprTopoImageEastProtectionStatus IEEE-802DOT17-RPR-MIBrprIfCurrentStatus	`.1.3.6.1.4.1.2011.5.25.36.2.3`	When an topology change is present, a notification may be generated..
hwRPRtopoInvalidDefect IF-MIBifPhysAddress IEEE-802DOT17-RPR-MIBrprIfCurrentStatus	`.1.3.6.1.4.1.2011.5.25.36.2.4`	A critical severity defect indicating that an invalid entry has been found within the scope of the topology,the stations on the ring excess the MAX_STATIONS or the local station has one or more duplicate secondary MAC addresses. When a topology entry invalid defect ,exceeing MaxStations or duplicate secondary MAC addresses is present, a notification may be generated.
hwRPRduplicateMacAddressDefect IF-MIBifPhysAddress IEEE-802DOT17-RPR-MIBrprTopoImageRinglet0Hops IEEE-802DOT17-RPR-MIBrprTopoImageRinglet1Hops	`.1.3.6.1.4.1.2011.5.25.36.2.5`	A critical severity defect indicating that a duplicateMacAddress has been found on the ring. When a duplicateMacAddress defect is present, a notification may be generated.
hwRPRtopoInstabilityDefect IF-MIBifPhysAddress	`.1.3.6.1.4.1.2011.5.25.36.2.6`	The critical severity Instable topology defect. When an Instable topology defect is present, a notification may be generated.
hwRPRtopoStabilityRestore IF-MIBifPhysAddress	`.1.3.6.1.4.1.2011.5.25.36.2.7`	The critical severity Instable topology restore. When an stable topology is present, a notification may be generated.
hwRPRPhyIfEventTrap hwRPRLogicIfIndex hwRPRLogicIfSpanId hwRPRPhyIfEvent	`.1.3.6.1.4.1.2011.5.25.36.2.8`	The critical severity physical interface defect. When an physical interface defect is present, a notification may be generated.
hwRPRLogicIfEventTrap hwRPRLogicIfIndex hwRPRLogicIfSpanId hwRPRLogicIfEvent	`.1.3.6.1.4.1.2011.5.25.36.2.9`	The critical severity Logic interface defect. When an logic interface defect that caused by physical interface event is present, a notification may be generated.