HUAWEI-RBRP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

hwRBRPWrapToNormalTable

table

.1.3.6.1.4.1.2011.5.25.117.1.2 · 1 row entry · 2 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwRBRPWrapToNormalTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-RBRP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-RBRP-MIB::hwRBRPWrapToNormalTable'

Table contains WrapToNormalDelay information in the  ring-if .

hwRBRPWrapToNormalEntry row .1.3.6.1.4.1.2011.5.25.117.1.2.1

An entry contains WrapToNormalDelay information of ring-if
in the device.

Indexes

hwRBRPRingIfIndex

Column	Syntax	OID
hwRBRPRingIfIndex RPR logic interface index.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.2011.5.25.117.1.2.1.1`
hwRBRPWrapToNormalVal This object sets WrapToNormalDelay time of ring-if.	Integer32r/w Constraints: `range: 0-100`	`.1.3.6.1.4.1.2011.5.25.117.1.2.1.11`

hwRBRPGroupCfgTable

table

.1.3.6.1.4.1.2011.5.25.117.1.3 · 1 row entry · 6 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwRBRPGroupCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-RBRP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-RBRP-MIB::hwRBRPGroupCfgTable'

Table contains group based configuration information 
for RBRP.

hwRBRPGroupCfgEntry row .1.3.6.1.4.1.2011.5.25.117.1.3.1

An entry, which contains configuration information for
a specific group, is created for each group in the device
and deleted when the device exit the group.

Indexes

hwRBRPGroupCfgGroupID

Column Syntax OID

hwRBRPGroupCfgGroupID

This object distinguishes a specific group from other
groups in the device.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.2011.5.25.117.1.3.1.1

hwRBRPPriorityValue

This object indicates the device's priority which
determines the status of a device in a specific group.
The non-unready device with the largest priority value
is in active status.
When a device's priority is equal to…

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.5.25.117.1.3.1.11

hwRBRPPreemptedEnable

If PreemptedEnable is configured in a device which is
in active status in a specific group, its status could
be preempted by device with larger priority value.

EnabledStatusr/w

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.2011.5.25.117.1.3.1.12

hwRBRPStatePromptSwitchEnable

If StatePromptSwitchEnable is configured on a common station which
belongs to a specific group, The common station moves from standby
state to active state promptly when multiple-site faults occur to
the primary rin…

EnabledStatusr/w

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.2011.5.25.117.1.3.1.13

hwRBRPPreemptDelayValue

This object is used to set the delay for the station moving from the active state
to the ready state after preempted.

Integer32r/w

Constraints:
range: 60-1200

.1.3.6.1.4.1.2011.5.25.117.1.3.1.14

hwRBRPGroupCfgRowStatus

RowStatus, Now support three value:CreateAndGo,Active,Destroy.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.2011.5.25.117.1.3.1.51

hwRBRPPGRingIfCfgTable

table

.1.3.6.1.4.1.2011.5.25.117.1.4 · 1 row entry · 4 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwRBRPPGRingIfCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-RBRP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-RBRP-MIB::hwRBRPPGRingIfCfgTable'

Table contains configuration information of ring-if in
specific group.

hwRBRPPGRingIfCfgEntry row .1.3.6.1.4.1.2011.5.25.117.1.4.1

An entry contains configuration information of ring-if in
specific group.

Indexes

hwRBRPPGGroupID hwRBRPRingType

Column Syntax OID

hwRBRPPGGroupID

This object distinguishes a specific group from other
groups in the device.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.2011.5.25.117.1.4.1.1

hwRBRPRingType

This object indicates a ring-if is on the primary rpr ring
or on the secondary rpr ring.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.2011.5.25.117.1.4.1.2

hwRBRPRGRingIfIndex

RPR logic interface index.

IF-MIBInterfaceIndexr/w

Type Constraints:
range: 1..2147483647

Description:

A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …

.1.3.6.1.4.1.2011.5.25.117.1.4.1.11

hwRBRPGroupRowStatus

RowStatus, Now support three value:CreateAndGo,Active,Destroy.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2011.5.25.117.1.4.1.51

hwRBRPPStatisTable

table

.1.3.6.1.4.1.2011.5.25.117.1.5 · 1 row entry · 6 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwRBRPPStatisTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-RBRP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-RBRP-MIB::hwRBRPPStatisTable'

Table contains statistics information of RBRP packets.

hwRBRPPStatisEntry row .1.3.6.1.4.1.2011.5.25.117.1.5.1

An entry contains statistics information of RBRP packets.

Indexes

hwRBRPStatisGroupID

Column Syntax OID

hwRBRPStatisGroupID

This object distinguishes a specific group from other
groups in the device.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.2011.5.25.117.1.5.1.1

hwRBRPStatisRevPacketsNum

This object indicates the number of RBRP packets received
from a specific group.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.117.1.5.1.11

hwRBRPStatisRevByteNum

This object indicates the number of RBRP bytes received
from a specific group.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.117.1.5.1.12

hwRBRPStatisSendPacketsNum

This object indicates the number of RBRP packets sendedd
to a specific group.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.117.1.5.1.13

hwRBRPStatisSendByteNum

This object indicates the number of RBRP bytes sendedd
to a specific group.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.117.1.5.1.14

hwRBRPClearStatisticPacket

Clear the statistics information of RBRP packets.

EnabledStatusr/w

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.2011.5.25.117.1.5.1.15

hwRBRPGroupInfoTable

table

.1.3.6.1.4.1.2011.5.25.117.1.6 · 1 row entry · 6 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwRBRPGroupInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-RBRP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-RBRP-MIB::hwRBRPGroupInfoTable'

Table contains RBRP group information.

hwRBRPGroupInfoEntry row .1.3.6.1.4.1.2011.5.25.117.1.6.1

An entry contains RBRP group information.

Indexes

hwRBRPGroupID hwRBRPDeviceId

Column	Syntax	OID
hwRBRPGroupID This object distinguishes a specific group from other groups in the device.	Integer32 Constraints: `range: 1-255`	`.1.3.6.1.4.1.2011.5.25.117.1.6.1.1`
hwRBRPDeviceId This object distinguishes a specific device from other devices in the groups.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.2011.5.25.117.1.6.1.2`
hwRBRPPrimaryRPRMacAddress This object indicates the mac address of rpr station on the primary rpr ring.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.2011.5.25.117.1.6.1.11`
hwRBRPSecondaryRPRMacAddress This object indicates the mac address of rpr station on the secondary rpr ring.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.2011.5.25.117.1.6.1.12`
hwRBRPPriority This object indicates the priority of a device in specific group.	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.2011.5.25.117.1.6.1.13`
hwRBRPCurrentStatus This object indicates the status of a device in specific group. Now support four state:Unready, Ready, Standby, and Active.	Integer32 Constraints: `range: 1-4`	`.1.3.6.1.4.1.2011.5.25.117.1.6.1.14`