HUAWEI-QINQ-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
21
Rows
21
Columns
137
.1.3.6.1.4.1.2011.5.25.116.2.1 · 1 row entry · 10 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwQinQBpduTunnelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-QINQ-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-QINQ-MIB::hwQinQBpduTunnelTable'
QinQ-port configuration table.
hwQinQBpduTunnelEntry row .1.3.6.1.4.1.2011.5.25.116.2.1.1
The entry of an interface enabled the QinQ function.
Column Syntax OID
hwQinQBpduTunnelIndexIndex number of the interface.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.5.25.116.2.1.1.1
hwQinQEtherEncpsTypeThe value of tag type is encapsulated in the head of the Ethernet frame
To distinguish the encapsulated mode between the 802.1Q and QinQ.
OctetStringr/w
Constraints:
range: 2-2
.1.3.6.1.4.1.2011.5.25.116.2.1.1.2
hwQinQBpduTunnelEnableOneQBpduTunnelThe value indicates whether the 1Q-bpdutunnel is opened,
If hwQinQBpduTunnelEnableTwoQBpduTunnel is enabling, then this value should be disable.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
.1.3.6.1.4.1.2011.5.25.116.2.1.1.3
hwQinQBpduTunnelEnableBpduTagWhether to enable the setting of BPDU Tunnel tag. Default is disabled.P-BRIDGE-MIBEnabledStatus
Type Values:
1enabled
2disabled
.1.3.6.1.4.1.2011.5.25.116.2.1.1.4
hwQinQBpduTunnelEnableTwoQBpduTunnelThe value indicates whether the 2Q-bpdutunnel is opened,
If hwQinQBpduTunnelEnableOneQBpduTunnel is enabling, then this value should be disable.
Default is disabled.
P-BRIDGE-MIBEnabledStatus
Type Values:
1enabled
2disabled
.1.3.6.1.4.1.2011.5.25.116.2.1.1.5
hwQinQBpduTunnelCustomerBpduTagThe tag is inserted into the head of the BPDU ,to support
that can be transmitted through the services' network.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.5.25.116.2.1.1.6
hwQinQBpduTunnelCustomerBpduTagListLowThe list describes accessible bode from different vlan (0 to 2047).OctetStringr/w
Constraints:
range: 256-256
.1.3.6.1.4.1.2011.5.25.116.2.1.1.7
hwQinQBpduTunnelCustomerBpduTagListHighThe list describes accessible bpdu from different vlan (2048 to 4094).OctetStringr/w
Constraints:
range: 256-256
.1.3.6.1.4.1.2011.5.25.116.2.1.1.8
hwQinQRemarkOuterTpidThe value indicates the TPID of outer tag of packets that have two tag and output from the output interface of vlan-switch,
If hwQinQEtherEncpsType is enabling, then this value should be 0xffff.
Enumerationr/w
Enumerated Values:
1hexffff
2hex88a8
3hex9100
4hex8100
.1.3.6.1.4.1.2011.5.25.116.2.1.1.9
hwQinQBpduTunnelEnableBpduFilterThe value indicates whether the BPDU filter function is enabled.
If hwQinQBpduTunnelEnableBpduFilter is enabled, then this value should be enable.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
.1.3.6.1.4.1.2011.5.25.116.2.1.1.10
.1.3.6.1.4.1.2011.5.25.116.2.2 · 1 row entry · 6 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwQinQSubIfVlanStackingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-QINQ-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-QINQ-MIB::hwQinQSubIfVlanStackingTable'
Used to configure packets'vlan stacking in sub interface, receive one-tag
packets and transmit two-tag packets, where the outer-tag inserted is in
hwQinQSubIfVlanStackingTable.
hwQinQSubIfVlanStackingEntry row .1.3.6.1.4.1.2011.5.25.116.2.2.1
The entry of an interface enabled the QinQ-stacking function.
Column Syntax OID
hwQinQSubIfStackingIfIndexIndex number of the QinQ-stacking interface.IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.2011.5.25.116.2.2.1.1
hwQinQSubIfStackingCEVlanStartWhen configure ce vlan as a range, hwQinQSubIfStackingCEVlanStart is the
start vlan id and hwQinQSubIfStackingCEVlanEnd is the end vlan id.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
.1.3.6.1.4.1.2011.5.25.116.2.2.1.2
hwQinQSubIfStackingCEVlanEndWhen configure ce vlan as a range, hwQinQSubIfStackingCEVlanStart is the
start vlan id and hwQinQSubIfStackingCEVlanEnd is the end vlan id.
Q-BRIDGE-MIBVlanIdr/w
Type Constraints:
range: 1..4094
.1.3.6.1.4.1.2011.5.25.116.2.2.1.3
hwQinQSubIfStackGroupIdGroup-management id.Integer32r/w
Constraints:
range: 0-16
.1.3.6.1.4.1.2011.5.25.116.2.2.1.4
hwQinQSubIfStackingRowStatusUsed for controlling the creation and deletion of this
row. All writable objects in this row may be modified at any time.
If a Network Management Application attempts to delete a conceptual
row by setting this object…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.2011.5.25.116.2.2.1.5
hwQinQSubIfStackingPEVlanPE vlan id.Integer32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.2011.5.25.116.2.2.1.6
.1.3.6.1.4.1.2011.5.25.116.2.3 · 1 row entry · 13 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwQinQSubIfStackingStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-QINQ-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-QINQ-MIB::hwQinQSubIfStackingStatTable'
When a sub interface configured QinQ-stacking function, hwQinQSubIfStackingStatTable is used to
statistic total number of the out packets and in packets.
hwQinQSubIfStackingStatEntry row .1.3.6.1.4.1.2011.5.25.116.2.3.1
The entry of an interface enabled the QinQ-stacking function.
Column Syntax OID
hwQinQSubIfStackingStatIfIndexIndex number of the QinQ-stacking interface.IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.2011.5.25.116.2.3.1.1
hwQinQSubIfStackingStatCEVlanThis object indicates the CE VLAN ID of the sub-interface configured with VLAN stacking.Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
.1.3.6.1.4.1.2011.5.25.116.2.3.1.2
hwQinQSubIfStackStatGroupIdThe group-management id. The statistic number of packets can not get if
the statistic funtion is not enabled.
Integer32
Constraints:
range: 1-16
.1.3.6.1.4.1.2011.5.25.116.2.3.1.3
hwQinQSubIfStackingStatOutPacketsTotal number of out packets of the sub interface.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.25.116.2.3.1.4
hwQinQSubIfStackingStatOutBytesTotal number of out bytes of the sub interface.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.25.116.2.3.1.5
hwQinQSubIfStackingStatInPacketsTotal number of in packets of the sub interface.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.25.116.2.3.1.6
hwQinQSubIfStackingStatInBytesTotal number of in bytes of the sub interface.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.25.116.2.3.1.7
hwQinQSubIfStackStatOutBdPacketsTotal number of broadcast packets transmitted out of the sub interface.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.25.116.2.3.1.8
hwQinQSubIfStackStatInBdPacketsTotal number of broadcast packets received from the sub interface.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.25.116.2.3.1.9
hwQinQSubIfStackStatOutMuPacketsTotal number of multicast packets transmitted out of the sub interface.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.25.116.2.3.1.10
hwQinQSubIfStackStatInMuPacketsTotal number of multicast packets received from the sub interface.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.25.116.2.3.1.11
hwQinQSubIfStackStatOutUniPacketsTotal number of unicast packets transmitted out of the sub interface.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.25.116.2.3.1.12
hwQinQSubIfStackStatInUniPacketsTotal number of unicast packets received from the sub interface.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.25.116.2.3.1.13
.1.3.6.1.4.1.2011.5.25.116.2.4 · 1 row entry · 7 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwQinQSubIfTermTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-QINQ-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-QINQ-MIB::hwQinQSubIfTermTable'
The table is used to configure QinQ-termination function in sub interface, then packets
transmitted from this sub interface input with two tags will be terminated.
hwQinQSubIfTermEntry row .1.3.6.1.4.1.2011.5.25.116.2.4.1
The entry of an interface enabled the QinQ-termination function.
Column Syntax OID
hwQinQSubIfTermIfIndexIndex number of the QinQ VLAN tag termination sub-interface.IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.2011.5.25.116.2.4.1.1
hwQinQSubIfTermPEVlanOuter VLAN ID of the packets which have two tags before being terminated.Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
.1.3.6.1.4.1.2011.5.25.116.2.4.1.2
hwQinQSubIfTermCEVlanStartWhen configure CE VLAN as a range, hwQinQSubIfTermCEVlanStart
is the start VLAN ID and hwQinQSubIfTermCEVlanEnd is the end VLAN ID.
Q-BRIDGE-MIBVlanIdOrNone
Type Constraints:
range: 0..4094
.1.3.6.1.4.1.2011.5.25.116.2.4.1.3
hwQinQSubIfTermCEVlanEndWhen configure CE VLAN as a range, hwQinQSubIfTermCEVlanStart is
the start VLAN ID and hwQinQSubIfTermCEVlanEnd is the end VLAN ID.
Q-BRIDGE-MIBVlanIdr/w
Type Constraints:
range: 1..4094
.1.3.6.1.4.1.2011.5.25.116.2.4.1.4
hwQinQSubIfTermGroupIdGroup-management id.Integer32r/w
Constraints:
range: 0-16
.1.3.6.1.4.1.2011.5.25.116.2.4.1.5
hwQinQSubIfTermRowStatusUsed for controlling the creation and deletion of this
row. All writeable objects in this row may be modified at any time.
If a Network Management Application attempts to delete a conceptual
row by setting this objec…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.2011.5.25.116.2.4.1.6
hwQinQSubIfTermCeVlanAnyThe QinQ VLAN tag termination sub-interface permits
packets carrying any inner VLAN tag.
Enumerationr/w
Enumerated Values:
1anyother
.1.3.6.1.4.1.2011.5.25.116.2.4.1.7
.1.3.6.1.4.1.2011.5.25.116.2.5 · 1 row entry · 14 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwQinQSubIfTermStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-QINQ-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-QINQ-MIB::hwQinQSubIfTermStatTable'
When a sub interface configured QinQ-termination function, hwQinQSubIfTermStatTable used to
statistic total number of the out packets and in packets.
hwQinQSubIfTermStatEntry row .1.3.6.1.4.1.2011.5.25.116.2.5.1
The entry of an interface enabled the QinQ-termination function.
Column Syntax OID
hwQinQSubIfTermStatIfIndexIndex number of the QinQ-termination interface.IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.2011.5.25.116.2.5.1.1
hwQinQSubIfTermStatPEVlanOuter vlan in packets which input the QinQ sub interface,
used to indicate the packets as an index.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
.1.3.6.1.4.1.2011.5.25.116.2.5.1.2
hwQinQSubIfTermStatCEVlanInner vlan in packets which input the QinQ sub interface,
used to indicate the packets as an index.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
.1.3.6.1.4.1.2011.5.25.116.2.5.1.3
hwQinQSubIfTermStatGroupIdThe group-management id. The statistic number of packets can not get if
the statistic funtion is not enabled.
Integer32
Constraints:
range: 1-16
.1.3.6.1.4.1.2011.5.25.116.2.5.1.4
hwQinQSubIfTermStatOutPacketsTotal number of out packets of the sub interface.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.25.116.2.5.1.5
hwQinQSubIfTermStatOutBytesTotal number of out bytes of the sub interface.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.25.116.2.5.1.6
hwQinQSubIfTermStatInPacketsTotal number of in packets of the sub interface.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.25.116.2.5.1.7
hwQinQSubIfTermStatInBytesTotal number of in bytes of the sub interface.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.25.116.2.5.1.8
hwQinQSubIfTermStatOutBdPacketsTotal number of broadcast packets transmitted out of the sub interface.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.25.116.2.5.1.9
hwQinQSubIfTermStatInBdPacketsTotal number of broadcast packets received from the sub interface.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.25.116.2.5.1.10
hwQinQSubIfTermStatOutMuPacketsTotal number of multicast packets transmitted out of the sub interface.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.25.116.2.5.1.11
hwQinQSubIfTermStatInMuPacketsTotal number of multicast packets received from the sub interface.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.25.116.2.5.1.12
hwQinQSubIfTermStatOutUniPacketsTotal number of unicast packets transmitted out of the sub interface.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.25.116.2.5.1.13
hwQinQSubIfTermStatInUniPacketsTotal number of unicast packets received from the sub interface.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.25.116.2.5.1.14
.1.3.6.1.4.1.2011.5.25.116.2.6 · 1 row entry · 6 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwQinQStaticARPCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-QINQ-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-QINQ-MIB::hwQinQStaticARPCfgTable'
The table is used to configure QinQ static ARP.
hwQinQStaticARPCfgEntry row .1.3.6.1.4.1.2011.5.25.116.2.6.1
The entry of an interface enabled the QinQ function.
Column Syntax OID
hwQinQStaticARPCfgIfIndexThe interface's Index.IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.2011.5.25.116.2.6.1.1
hwQinQStaticARPCfgIpThe IP address.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.2011.5.25.116.2.6.1.2
hwQinQStaticARPCfgMacThe MAC address.SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.2011.5.25.116.2.6.1.3
hwQinQStaticARPCfgVlanThe first vlan id.Q-BRIDGE-MIBVlanIdr/w
Type Constraints:
range: 1..4094
.1.3.6.1.4.1.2011.5.25.116.2.6.1.4
hwQinQStaticARPCfgCEVlanThe second vlan id.Integer32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.2011.5.25.116.2.6.1.5
hwQinQStaticARPCfgRowStatusUsed for controlling the creation and deletion of this
row. All writeable objects in this row may be modified at any time.
If a Network Management Application attempts to delete a conceptual
row by setting this objec…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.2011.5.25.116.2.6.1.6
.1.3.6.1.4.1.2011.5.25.116.2.7 · 1 row entry · 9 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwQinQStaticMACCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-QINQ-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-QINQ-MIB::hwQinQStaticMACCfgTable'
The table is used to configure static MAC.
hwQinQStaticMACCfgEntry row .1.3.6.1.4.1.2011.5.25.116.2.7.1
The entry of an interface enabled the QinQ function.
Column Syntax OID
hwQinQStaticMACCfgMacThe MAC address.SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.2011.5.25.116.2.7.1.1
hwQinQStaticMACCfgVlanVlan id that the MAC address belongs to.Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
.1.3.6.1.4.1.2011.5.25.116.2.7.1.2
hwQinQStaticMACCfgVsiNameName of VSI that the MAC address belongs to.OctetString
Constraints:
range: 0-31
.1.3.6.1.4.1.2011.5.25.116.2.7.1.3
hwQinQStaticMACCfgPEVlanPE vlan id for a Network Management Application attempts to configure hwQinQStaticMACCfgTable.Q-BRIDGE-MIBVlanIdr/w
Type Constraints:
range: 1..4094
.1.3.6.1.4.1.2011.5.25.116.2.7.1.4
hwQinQStaticMACCfgCEVlanCE vlan id.Integer32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.2011.5.25.116.2.7.1.5
hwQinQStaticMACCfgTypeThe type of the MAC.Enumerationr/w
Enumerated Values:
0invalid
1dynamid
2static
3blackhole
4toobig
.1.3.6.1.4.1.2011.5.25.116.2.7.1.6
hwQinQStaticMACCfgIfIndexIndex number of the interface.IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.2011.5.25.116.2.7.1.7
hwQinQStaticMACCfgFlagThe config type.Enumerationr/w
Enumerated Values:
1vlan
2vsi
3mapping
4qinqtermination
5dot1qtermination
.1.3.6.1.4.1.2011.5.25.116.2.7.1.8
hwQinQStaticMACCfgRowStatusUsed for controlling the creation and deletion of this
row. All writeable objects in this row may be modified at any time.
If a Network Management Application attempts to delete a conceptual
row by setting this objec…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.2011.5.25.116.2.7.1.9
.1.3.6.1.4.1.2011.5.25.116.2.8 · 1 row entry · 5 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwQinQSubIfDot1qTermTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-QINQ-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-QINQ-MIB::hwQinQSubIfDot1qTermTable'
Used to configure Dot1q-termination function in sub interface ,then packets
transmitted from this sub interface input with one tag will be terminated.
hwQinQSubIfDot1qTermEntry row .1.3.6.1.4.1.2011.5.25.116.2.8.1
The entry of an interface enabled the Dot1q-termination function.
Column Syntax OID
hwQinQSubIfDot1qTermIfIndexIndex number of the Dot1q-termination interface.IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.2011.5.25.116.2.8.1.1
hwQinQSubIfDot1qTermVidStartWhen configure ce vlan as a range, hwQinQSubIfDot1qTermCEVlanStart
is the start vlan id and hwQinQSubIfDot1qTermCEVlanEnd is the end vlan id.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
.1.3.6.1.4.1.2011.5.25.116.2.8.1.2
hwQinQSubIfDot1qTermVidEndWhen configure ce vlan as a range, hwQinQSubIfDot1qTermCEVlanStart is
the start vlan id and hwQinQSubIfDot1qTermCEVlanEnd is the end vlan id.
Q-BRIDGE-MIBVlanIdr/w
Type Constraints:
range: 1..4094
.1.3.6.1.4.1.2011.5.25.116.2.8.1.3
hwQinQSubIfDot1qTermGroupIdGroup-management id.Integer32r/w
Constraints:
range: 0-16
.1.3.6.1.4.1.2011.5.25.116.2.8.1.4
hwQinQSubIfDot1qTermRowStatusUsed for controlling the creation and deletion of this
row. All writeable objects in this row may be modified at any time.
If a Network Management Application attempts to delete a conceptual
row by setting this objec…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.2011.5.25.116.2.8.1.5
.1.3.6.1.4.1.2011.5.25.116.2.9 · 1 row entry · 13 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwQinQSubIfDot1qTermStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-QINQ-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-QINQ-MIB::hwQinQSubIfDot1qTermStatTable'
When a sub interface configured Dot1q-termination, hwQinQSubIfDot1qTermStatTable used to
statistic total number of the out packets and in packets.
hwQinQSubIfDot1qTermStatEntry row .1.3.6.1.4.1.2011.5.25.116.2.9.1
The entry of an interface configured Dot1q-termination function.
Column Syntax OID
hwQinQSubIfDot1qTermStatIfIndexIndex number of the Dot1q-termination interface.IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.2011.5.25.116.2.9.1.1
hwQinQSubIfDot1qTermStatCEVlanInner vlan in packets which input the Dot1q-termination sub interface,
used to indicate the packets as an index.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
.1.3.6.1.4.1.2011.5.25.116.2.9.1.2
hwQinQSubIfDot1qTermStatGroupIdThe group-management id. The statistic number of packets can not get if
the statistic funtion is not enabled.
Integer32
Constraints:
range: 1-16
.1.3.6.1.4.1.2011.5.25.116.2.9.1.3
hwQinQSubIfDot1qTermStatOutPacketsTotal number of out packets of the sub interface.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.25.116.2.9.1.4
hwQinQSubIfDot1qTermStatOutBytesTotal number of out bytes of the sub interface.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.25.116.2.9.1.5
hwQinQSubIfDot1qTermStatInPacketsTotal number of in packets of the sub interface.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.25.116.2.9.1.6
hwQinQSubIfDot1qTermStatInBytesTotal number of in bytes of the sub interface.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.25.116.2.9.1.7
hwQinQSubIfDot1qTermStatOutBdPacketsTotal number of broadcast packets transmitted out of the sub interface.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.25.116.2.9.1.8
hwQinQSubIfDot1qTermStatInBdPacketsTotal number of broadcast packets received from the sub interface.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.25.116.2.9.1.9
hwQinQSubIfDot1qTermStatOutMuPacketsTotal number of multicast packets transmitted out of the sub interface.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.25.116.2.9.1.10
hwQinQSubIfDot1qTermStatInMuPacketsTotal number of multicast packets received from the sub interface.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.25.116.2.9.1.11
hwQinQSubIfDot1qTermStatOutUniPacketsTotal number of unicast packets transmitted out of the sub interface.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.25.116.2.9.1.12
hwQinQSubIfDot1qTermStatInUniPacketsTotal number of unicast packets received from the sub interface.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.5.25.116.2.9.1.13
.1.3.6.1.4.1.2011.5.25.116.2.10 · 1 row entry · 4 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwQinQModeCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-QINQ-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-QINQ-MIB::hwQinQModeCfgTable'
The table contains mode type and ethernet encapsulation type.
hwQinQModeCfgEntry row .1.3.6.1.4.1.2011.5.25.116.2.10.1
The mode type and ethernet encapsulation type of an interface entry.
Column Syntax OID
hwQinQModeCfgIfIndexIndex number of the interface.IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.2011.5.25.116.2.10.1.1
hwQinQModeCfgModeMode type of the interface.Enumerationr/w
Enumerated Values:
1common
2qinq
.1.3.6.1.4.1.2011.5.25.116.2.10.1.2
hwQinQEtherTypeThe value of tag type is encapsulated in the head of the ethernet frame
to distinguish the encapsulated mode between the 802.1Q and QinQ.
Unsigned32r/w
Constraints:
range: 1536-65535
.1.3.6.1.4.1.2011.5.25.116.2.10.1.3
hwQinQCeEtherTypeThe value of tag type is encapsulated in the head of the ethernet frame
to distinguish the encapsulated mode between the 802.1Q and QinQ.
Unsigned32r/w
Constraints:
range: 1536-65535
.1.3.6.1.4.1.2011.5.25.116.2.10.1.4
.1.3.6.1.4.1.2011.5.25.116.2.11 · 1 row entry · 6 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwQinQCtrlVlanCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-QINQ-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-QINQ-MIB::hwQinQCtrlVlanCfgTable'
The control-vlan id and control-vlan's attributes can be configured in sub interface.
You must designate control-vlan as QinQ or Dot1q before configuring QinQ-termination 
function or Dot1q-termination function.
hwQinQCtrlVlanCfgEntry row .1.3.6.1.4.1.2011.5.25.116.2.11.1
The Control-vlan configuration entry.
Column Syntax OID
hwQinQCtrlVlanCfgIfIndexIndex number of the sub interface.IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.2011.5.25.116.2.11.1.1
hwQinQCtrlVlanControl-Vlan id.Q-BRIDGE-MIBVlanIdr/w
Type Constraints:
range: 1..4094
.1.3.6.1.4.1.2011.5.25.116.2.11.1.2
hwQinQSubIfTypeThe type of sub interface.Enumerationr/w
Enumerated Values:
1qinq
2dot1q
.1.3.6.1.4.1.2011.5.25.116.2.11.1.3
hwQinQCtrlVlanFlagThe service type of the sub interface, by setting hwQinQCtrlVlanFlag to the value (rtprotocolenable),
the route-protocol attribute enabled; and by setting hwQinQCtrlVlanFlag to the value (localswitch),
the localswitch …
Enumerationr/w
Enumerated Values:
1rtprotocolenable
2original
3localswitch
.1.3.6.1.4.1.2011.5.25.116.2.11.1.4
hwQinQCtrlVlanRowStatusThis table can be created and deleted.SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.2011.5.25.116.2.11.1.5
hwQinQFlexibleFlagThe service type of the sub interface, by setting hwQinQFlexibleFlag to the value (flexibleenable),
the flexible attribute enabled;
So if you set hwQinQSubIfType to be dot1q type, you can not specify hwQinQFlexibleFlag…
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
.1.3.6.1.4.1.2011.5.25.116.2.11.1.6
.1.3.6.1.4.1.2011.5.25.116.2.12 · 1 row entry · 5 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwQinQGroupCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-QINQ-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-QINQ-MIB::hwQinQGroupCfgTable'
The group-management id and group's attributes can be configured in sub interface.
hwQinQGroupCfgEntry row .1.3.6.1.4.1.2011.5.25.116.2.12.1
Group configuration entry.
Column Syntax OID
hwQinQGroupCfgIfIndexIndex number of the interface.IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.2011.5.25.116.2.12.1.1
hwQinQGroupIdGroup-management id.Integer32
Constraints:
range: 1-16
.1.3.6.1.4.1.2011.5.25.116.2.12.1.2
hwQinQGroupTypeThe type of the group.Enumerationr/w
Enumerated Values:
1single
2multi
.1.3.6.1.4.1.2011.5.25.116.2.12.1.3
hwQinQGroupStatWhether the statistic function is enabled.P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
.1.3.6.1.4.1.2011.5.25.116.2.12.1.4
hwQinQGroupRowStatusThis table can be created and deleted.SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.2011.5.25.116.2.12.1.5
.1.3.6.1.4.1.2011.5.25.116.2.13 · 1 row entry · 3 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwQinQAsymmetryCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-QINQ-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-QINQ-MIB::hwQinQAsymmetryCfgTable'
The table to configure asymmetry attribution of the interface.
hwQinQAsymmetryCfgEntry row .1.3.6.1.4.1.2011.5.25.116.2.13.1
The entry of the asymmetry configure table.
Column Syntax OID
hwQinQAsymmetryCfgIfIndexIndex number of the QinQ-termination interface.IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.2011.5.25.116.2.13.1.1
hwQinQSubIfAsymmetryThe asymmetry attribution of the QinQ-termination interface.Enumerationr/w
Enumerated Values:
1symmetry
2asymmetry
3transparent
.1.3.6.1.4.1.2011.5.25.116.2.13.1.2
hwQinQAsymmetryUserModeThe user mode attribute of the QinQ-termination sub interface.P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
.1.3.6.1.4.1.2011.5.25.116.2.13.1.3
.1.3.6.1.4.1.2011.5.25.116.2.14 · 1 row entry · 2 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwQinQRemarkCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-QINQ-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-QINQ-MIB::hwQinQRemarkCfgTable'
Interface remark config.
hwQinQRemarkCfgEntry row .1.3.6.1.4.1.2011.5.25.116.2.14.1
The entry of the interface remark configuration table.
Column Syntax OID
hwQinQRemarkCfgIfIndexIndex number of the sub interface,
which should configure QinQ-termination function first.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.2011.5.25.116.2.14.1.1
hwQinQPriorityRemarkThe service policy map to set the 802.1P bits. By default(pevid),
copy the P bits that were in the outer PE VLAN tag to the trunk VLAN tag,
by setting object to (cevid), copy the P bits that were in inner CE VALN
tag t…
Enumerationr/w
Enumerated Values:
0specify0
1specify1
2specify2
3specify3
4specify4
5specify5
6specify6
7specify7
8cevid
9pevid
.1.3.6.1.4.1.2011.5.25.116.2.14.1.2
.1.3.6.1.4.1.2011.5.25.116.2.15 · 1 row entry · 4 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwBpduTunnelIngressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-QINQ-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-QINQ-MIB::hwBpduTunnelIngressTable'
The table of bpdu tunnel ingress.
hwBpduTunnelIngressEntry row .1.3.6.1.4.1.2011.5.25.116.2.15.1
The entry of of bpdu tunnel ingress.
Column Syntax OID
hwBpduTunnelIngressPortIndexPort index in interface.Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.2011.5.25.116.2.15.1.1
hwBpduTunnelBpduIngressMacIndexbpdu mac address list
BPDU Dmac protocol
01-80-C2-00-00-00 stp01
01-80-C2-00-00-01 pauseFrame
01-80-C2-00-00-02 reserved02
01-80-C2-00-00-03 reserved03
01-80-C2-00-00-04 reserved04
01-80-C2-00-00-0…
BpduIndex
Type Values:
1stp01
2pauseFrame
3reserved02
4reserved03
5reserved04
6reserved05
7reserved06
8reserved07
9stp02
10reserved08
11hgmp
12reserved09
13reserved10
14reserved11
15reserved12
16reserved13
17reserved14
18reserved15
19reserved16
20reserved17
21isisLevel01
22isisLevel02
23reserved18
24reserved19
25reserved20
26reserved21
27reserved22
28reserved23
29reserved24
30reserved25
31reserved26
32reserved27
33gmrp
34gvrp
35reserved28
36reserved29
37reserved30
38reserved31
39reserved32
40reserved33
41reserved34
42reserved35
43reserved36
44reserved37
45reserved38
46reserved39
47reserved40
48reserved41
49lacp
50cdp
51pagp
52udld
53vtp
.1.3.6.1.4.1.2011.5.25.116.2.15.1.2
hwBpduTunnelIngressAddressGroup mac address.SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.2011.5.25.116.2.15.1.3
hwBpduTunnelIngressRowStatusBpdu tunnek ingress row status.SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.2011.5.25.116.2.15.1.4
.1.3.6.1.4.1.2011.5.25.116.2.16 · 1 row entry · 4 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwBpduTunnelEgressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-QINQ-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-QINQ-MIB::hwBpduTunnelEgressTable'
The table of bpdu tunnel egress.
hwBpduTunnelEgressEntry row .1.3.6.1.4.1.2011.5.25.116.2.16.1
The entry of bpdu tunnel egress.
Column Syntax OID
hwBpduTunnelEgressPortIndexPort index in interface.Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.2011.5.25.116.2.16.1.1
hwBpduTunnelBpduEgressMacIndexBpdu MAC address list
BPDU DMAC protocol
01-80-C2-00-00-00 stp01
01-80-C2-00-00-01 pauseFrame
01-80-C2-00-00-02 reserved02
01-80-C2-00-00-03 reserved03
01-80-C2-00-00-04 reserved04
01-80-C2-00-0…
BpduIndex
Type Values:
1stp01
2pauseFrame
3reserved02
4reserved03
5reserved04
6reserved05
7reserved06
8reserved07
9stp02
10reserved08
11hgmp
12reserved09
13reserved10
14reserved11
15reserved12
16reserved13
17reserved14
18reserved15
19reserved16
20reserved17
21isisLevel01
22isisLevel02
23reserved18
24reserved19
25reserved20
26reserved21
27reserved22
28reserved23
29reserved24
30reserved25
31reserved26
32reserved27
33gmrp
34gvrp
35reserved28
36reserved29
37reserved30
38reserved31
39reserved32
40reserved33
41reserved34
42reserved35
43reserved36
44reserved37
45reserved38
46reserved39
47reserved40
48reserved41
49lacp
50cdp
51pagp
52udld
53vtp
.1.3.6.1.4.1.2011.5.25.116.2.16.1.2
hwBpduTunnelEgressAddressGroup mac address.SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.2011.5.25.116.2.16.1.3
hwBpduTunnelEgressRowStatusRow Status.SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.2011.5.25.116.2.16.1.4
.1.3.6.1.4.1.2011.5.25.116.2.17 · 1 row entry · 4 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwBpduTunnelVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-QINQ-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-QINQ-MIB::hwBpduTunnelVlanTable'
The table of port bpdu tunnel.
hwBpduTunnelVlanEntry row .1.3.6.1.4.1.2011.5.25.116.2.17.1
The entry of port bpdu tunnel vlan.
Column Syntax OID
hwBpduTunnelPortIndexPort index in interface.Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.2011.5.25.116.2.17.1.1
hwBpduTunnelEnableBpdu tunnel enable.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.2011.5.25.116.2.17.1.2
hwBpduTunnelVlanListLowVlan bpdu tunnel in port.HUAWEI-L2IF-MIBVlanListr/w.1.3.6.1.4.1.2011.5.25.116.2.17.1.3
hwBpduTunnelVlanListHighVlan bpdu tunnel in port.HUAWEI-L2IF-MIBVlanListr/w.1.3.6.1.4.1.2011.5.25.116.2.17.1.4
.1.3.6.1.4.1.2011.5.25.116.2.18 · 1 row entry · 4 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwBpduTunnelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-QINQ-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-QINQ-MIB::hwBpduTunnelTable'
The table of bpdu tunnel.
hwBpduTunnelEntry row .1.3.6.1.4.1.2011.5.25.116.2.18.1
The entry of of bpdu tunnel.
Column Syntax OID
hwBpduTunnelBpduIndexBpdu mac address list
BPDU Dmac protocol
01-80-C2-00-00-00 stp01 (1)
01-80-C2-00-00-01 pauseFrame (2)
01-80-C2-00-00-02 reserved02 (3)
01-80-C2-00-00-03 reserved03 (4)
01-80-C2-00-00…
BpduIndex
Type Values:
1stp01
2pauseFrame
3reserved02
4reserved03
5reserved04
6reserved05
7reserved06
8reserved07
9stp02
10reserved08
11hgmp
12reserved09
13reserved10
14reserved11
15reserved12
16reserved13
17reserved14
18reserved15
19reserved16
20reserved17
21isisLevel01
22isisLevel02
23reserved18
24reserved19
25reserved20
26reserved21
27reserved22
28reserved23
29reserved24
30reserved25
31reserved26
32reserved27
33gmrp
34gvrp
35reserved28
36reserved29
37reserved30
38reserved31
39reserved32
40reserved33
41reserved34
42reserved35
43reserved36
44reserved37
45reserved38
46reserved39
47reserved40
48reserved41
49lacp
50cdp
51pagp
52udld
53vtp
.1.3.6.1.4.1.2011.5.25.116.2.18.1.1
hwBpduTunnelBpduEnableBpdu tunnel enable or disable.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.2011.5.25.116.2.18.1.2
hwBpduTunnelMultiAddressGroup MAC address.SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.2011.5.25.116.2.18.1.3
hwBpduTunnelRowStatusRow Status.SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.2011.5.25.116.2.18.1.4
.1.3.6.1.4.1.2011.5.25.116.2.19 · 1 row entry · 2 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwQinQSwapCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-QINQ-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-QINQ-MIB::hwQinQSwapCfgTable'
This table describes the vlan swap configurations of interfaces.
hwQinQSwapCfgEntry row .1.3.6.1.4.1.2011.5.25.116.2.19.1
An entry is created for each active ethernet type interface in the device
and deleted when the interface been not exist.
Column Syntax OID
hwQinQSwapCfgIfIndexIndex number of the interface.IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.2011.5.25.116.2.19.1.1
hwQinQSwapCfgFlagQinQ swap flag of the interface, which indicates whether to swap the two vlan tags or not when the interface receives a packet with two 802.1q tags.P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
.1.3.6.1.4.1.2011.5.25.116.2.19.1.2
.1.3.6.1.4.1.2011.5.25.116.2.20 · 1 row entry · 13 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwQinQSubIfMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-QINQ-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-QINQ-MIB::hwQinQSubIfMapTable'
The table is used to configure QinQ-mapping function in sub interface, then packets
transmitted from this sub interface input with one or two tags will be mapped to other tag or tags.
hwQinQSubIfMapEntry row .1.3.6.1.4.1.2011.5.25.116.2.20.1
The entry of an interface enabled the QinQ-Map function.
Column Syntax OID
hwQinQSubIfMapIfIndexIndex number of the QinQ-Map interface.IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.2011.5.25.116.2.20.1.1
hwQinQSubIfPEVlanOuter vlan id of the packets which have two tags before being Mapped.Integer32
Constraints:
range: 0-4094
.1.3.6.1.4.1.2011.5.25.116.2.20.1.2
hwQinQSubIfCEVlanStartInner start vlan id of the packets which have two tags before being Mapped.Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.2011.5.25.116.2.20.1.3
hwQinQSubIfCEVlanEndInner end vlan id of the packets which have two tags before being Mapped.Integer32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.2011.5.25.116.2.20.1.4
hwQinQSubIfPEVlanMapOuter vlan id of the packets which have two tags after being Mapped.Integer32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.2011.5.25.116.2.20.1.5
hwQinQSubIfPEEtherTypeEtherType of Pe Mapped.Unsigned32r/w
Constraints:
range: 1536-65535
.1.3.6.1.4.1.2011.5.25.116.2.20.1.6
hwQinQSubIfCEVlanMapInner vlan id of the packets which have two tags after being Mapped.Integer32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.2011.5.25.116.2.20.1.7
hwQinQSubIfCEEtherTypeEtherType of Ce Mapped.Unsigned32r/w
Constraints:
range: 1536-65535
.1.3.6.1.4.1.2011.5.25.116.2.20.1.8
hwQinQSubIfMapGroupIdGroup-management id.Integer32r/w
Constraints:
range: 0-16
.1.3.6.1.4.1.2011.5.25.116.2.20.1.9
hwQinQSubIfMapPe8021pThe service policy map to set the 802.1P bits. By default(pevid),
copy the P bits that were in the outer PE VLAN tag to the trunk VLAN tag,
by setting object to (cevid), copy the P bits that were in inner CE VALN
tag t…
Enumerationr/w
Enumerated Values:
0specify0
1specify1
2specify2
3specify3
4specify4
5specify5
6specify6
7specify7
.1.3.6.1.4.1.2011.5.25.116.2.20.1.10
hwQinQSubIfMapCe8021pThe service policy map to set the 802.1P bits. By default(pevid),
copy the P bits that were in the outer PE VLAN tag to the trunk VLAN tag,
by setting object to (cevid), copy the P bits that were in inner CE VALN
tag t…
Enumerationr/w
Enumerated Values:
0specify0
1specify1
2specify2
3specify3
4specify4
5specify5
6specify6
7specify7
.1.3.6.1.4.1.2011.5.25.116.2.20.1.11
hwQinQSubIfMapCetoPeFlagThe service type of the sub interface, by setting MapCetoPeFlag to the value (CetoPeenable),
the 8021p CetoPeenable attribute enabled.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
.1.3.6.1.4.1.2011.5.25.116.2.20.1.12
hwQinQSubIfMapRowStatusUsed for controlling the creation and deletion of this
row. All writeable objects in this row may be modified at any time.
If a Network Management Application attempts to delete a conceptual
row by setting this objec…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.2011.5.25.116.2.20.1.13
.1.3.6.1.4.1.2011.5.25.116.2.21 · 1 row entry · 3 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwQinQStackingVlanCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-QINQ-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-QINQ-MIB::hwQinQStackingVlanCfgTable'
QinQ Stacking Vlan configuration table.
hwQinQStackingVlanCfgEntry row .1.3.6.1.4.1.2011.5.25.116.2.21.1
This object indicates the configuration table for QinQ Stacking Vlan.
Column Syntax OID
hwQinQStackingVlanCfgIfIndexThis object indicates the Index number of the vlanif interface.IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.2011.5.25.116.2.21.1.1
hwQinQStackingVlanCfgVlanIdThis object indicates the outer vlan id for QinQ Stacking Vlan.Q-BRIDGE-MIBVlanIdr/w
Type Constraints:
range: 1..4094
.1.3.6.1.4.1.2011.5.25.116.2.21.1.2
hwQinQStackingVlanCfgRowStatusThis object indicates the RowStatus of hwQinQStackingVlanTable.SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.2011.5.25.116.2.21.1.50