HUAWEI-PW-CMD-MIB Table View

This table specifies information for configuring and 
status monitoring that are common to all service types.
The index of this table is hwPwCmdVcIndex.

hwPwCmdVcEntry row .1.3.6.1.4.1.2011.5.12.8.1.2.2.1

This table specifies information for configuring and
status monitoring that are common to all service types.
The index of this entry is hwPwCmdVcIndex.

Indexes

hwPwCmdVcIndex

Column	Syntax	OID
hwPwCmdVcIndex Index for the conceptual row identifying a PW within this PW Emulation table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.1
hwPwCmdVcSignalProtocol Set by the operator to indicate the protocol responsible for establishing this PW. The value 'static' is used in all cases where no maintenance protocol (PW signaling) is used to set up the PW, i.e. require configu…	SignalProtocolTyper/w Type Values: 1 ldp 2 static 3 udp	.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.2
hwPwCmdVcID Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element'.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.3
hwPwCmdVcType This value indicate the service to be carried over this PW.	HUAWEI-PW-TC-MIBPwVcTyper/w Type Values: 0 other 1 frameRelayDlci 2 atmAal5SduVcc 3 atmTransparent 4 ethernetTagged 5 ethernet 6 hdlc 7 ppp 8 cem 9 atmCellNto1Vcc 10 atmCellNto1Vpc 11 ipLayer2Transport 12 atmCell1to1Vcc 13 atmCell1to1Vpc 14 atmAal5PduVcc 15 frameRelayPortMode 16 cep 17 e1Satop 18 t1Satop 19 e3Satop 20 t3Satop 21 basicCesPsn 22 basicTdmIp 23 tdmCasCesPsn 24 tdmCasTdmIp	.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.4
hwPwCmdVcPeerAddrType Denotes the address type of the peer node. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.5
hwPwCmdVcPeerAddr This object contains the value of the peer node address of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeros if not applicable (hwPwCmdVcPeerAddrType is 'unknown').	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.6
hwPwCmdVcStatus Indicates the status of the PW in the local node.	VcStatusType Type Values: 1 down 2 up 3 plugout	.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.7
hwPwCmdVcInboundLabel The PW label used in the inbound direction (i.e. packets received from the PSN. Range: 16-1023 It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 2…	Unsigned32r/w Constraints: range: 16-1023	.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.8
hwPwCmdVcOutboundLabel The PW label used in the outbound direction (i.e. toward the PSN). Range: 16-1023 It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 20 bits of PW…	Unsigned32r/w Constraints: range: 16-1023	.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.9
hwPwCmdVcSwitchSignalProtocol Set by the operator to indicate the protocol responsible for establishing this PW. The value 'static' is used in all cases where no maintenance protocol (PW signaling) is used to set up the PW, i.e. require configu…	SignalProtocolTyper/w Type Values: 1 ldp 2 static 3 udp	.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.10
hwPwCmdVcSwitchID Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element' of the switch pw.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.11
hwPwCmdVcSwitchPeerAddrType Denotes the address type of the peer node of the switch pw. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.12
hwPwCmdVcSwitchPeerAddr This object contains the value of the peer node address of the switch pw of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeros if not applicable (hwPwCmdVcSwitchPeerAddrType is 'u…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.13
hwPwCmdVcSwitchInboundLabel The PW label used in the inbound direction (i.e. packets received from the PSN. Range: 16-1023 It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 2…	Unsigned32r/w Constraints: range: 16-1023	.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.14
hwPwCmdVcSwitchOutboundLabel The PW label used in the outbound direction (i.e. toward the PSN). Range: 16-1023 It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 20 bits of PW…	Unsigned32r/w Constraints: range: 16-1023	.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.15
hwPwCmdVcGroupID Used in the Group ID field sent to the peer PWES within the maintenance protocol used for PW setup. Applicable if pwVcOwner equal 'pwIdFecSignaling' or 'l2tpControlProtocol', should be set to zero otherwise.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.16
hwPwCmdVcIfIndex Index of the interface (or the virtual interface) associated with the PW.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.17
hwPwCmdVcAcStatus Local AC status. Options: 1. down(1) -indicates AC status down 2. up(2) -indicates AC status up 3. plugout(3) -indicates AC status plugout	Enumeration Enumerated Values: 1 down 2 up 3 plugout	.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.18
hwPwCmdVcMtu If not equal zero, the optional Mtu object in the signaling protocol will be sent with this value, representing the locally supported MTU size over the interface (or the virtual interface) associated with the PW.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.19
hwPwCmdVcCw If signaling is used for PW establishment, this object indicates the status of the control word negotiation, and in both signaling or manual configuration indicates if CW is to be present or not for this PW.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.20
hwPwCmdVcVCCV Indicates the optional VCCV capabilities of the pw. Options: 1. ccCw(0) 2. ccAlert(1) 3. ccLabel(2) 4. cvIcmpping(3) 5. cvLspping(4) 6. cvBfd(5)	Bitsr/w Enumerated Values: 0 ccCw 1 ccAlert 2 ccLabel 3 cvIcmpping 4 cvLspping 5 cvBfd	.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.21
hwPwCmdVcBandwidth Indicates the bandwidth when signaling protocol is rsvp.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.22
hwPwCmdVcMaxAtmCells Indicates the max cell supported when vctype is atm.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.23
hwPwCmdVcTnlPolicyName Indicates the tunnel policy name used.	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.24
hwPwCmdVcQoSBehaviorIndex Indicates the traffic behavior Index when QOS is implemented.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.25
hwPwCmdVcExplicitPathName Indicates the explicit path name set by the operator.	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.26
hwPwCmdVcTemplateIndex Indicates the pw template index referenced.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.27
hwPwCmdVcSecondary Indicates whether or not the secondary pw is used.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.28
hwPwCmdVcUpTime Specifies the total time this PW status has been Up(1).	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.29
hwPwCmdVcRowStatus For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.12.8.1.2.2.1.30

This table provides per-PW related tunnel information.
The indexes of this table are hwPwCmdVcIndex and hwPwCmdVcTnlIndex,
hwPwCmdVcIndexis set in hwPwCmdVcTable table.

hwPwCmdVcTnlEntry row .1.3.6.1.4.1.2011.5.12.8.1.2.3.1

This table provides per-PW related tunnel information.
The indexes of this entry are hwPwCmdVcIndex and hwPwCmdVcTnlIndex,
hwPwCmdVcIndexis set in hwPwCmdVcTable table.

Indexes

hwPwCmdVcIndex hwPwCmdVcTnlIndex

Column	Syntax	OID
hwPwCmdVcTnlIndex Indicates the tunnel index related to each PW.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.3.1.1

This table provides remote PW information for  
each local PW.The index of this table is hwPwCmdRemoteVcID.

hwPwCmdRemoteVcEntry row .1.3.6.1.4.1.2011.5.12.8.1.2.4.1

This table provides remote PW information for
each local PW.The index of this entry is hwPwCmdRemoteVcID.

Indexes

No indexes recorded

Column	Syntax	OID
hwPwCmdRemoteVcID Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element' of the remote PW.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.4.1.1
hwPwCmdRemoteVcType This value indicate the service to be carried over the remote PW.	HUAWEI-PW-TC-MIBPwVcType Type Values: 0 other 1 frameRelayDlci 2 atmAal5SduVcc 3 atmTransparent 4 ethernetTagged 5 ethernet 6 hdlc 7 ppp 8 cem 9 atmCellNto1Vcc 10 atmCellNto1Vpc 11 ipLayer2Transport 12 atmCell1to1Vcc 13 atmCell1to1Vpc 14 atmAal5PduVcc 15 frameRelayPortMode 16 cep 17 e1Satop 18 t1Satop 19 e3Satop 20 t3Satop 21 basicCesPsn 22 basicTdmIp 23 tdmCasCesPsn 24 tdmCasTdmIp	.1.3.6.1.4.1.2011.5.12.8.1.2.4.1.2
hwPwCmdRemoteVcStatus Indicates the status of the remote PW.	VcStatusType Type Values: 1 down 2 up 3 plugout	.1.3.6.1.4.1.2011.5.12.8.1.2.4.1.3
hwPwCmdRemoteVcGroupID Indicates the Group ID field of the remote PW.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.4.1.4
hwPwCmdRemoteVcMtu Indicates the supported MTU size of the remote PW.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.4.1.5
hwPwCmdRemoteVcCw Indicates the control word capability of the remote PW.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.12.8.1.2.4.1.6
hwPwCmdRemoteVcMaxAtmCells Indicates the max cell supported of the remote PW when vctype is atm.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.4.1.7
hwPwCmdRemoteVcNotif Indicates notification is supported by the remote PW.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.12.8.1.2.4.1.8
hwPwCmdRemoteVcSwitchID Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element' of the switch PW.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.4.1.9
hwPwCmdRemoteVcSwitchType This value indicate the service to be carried over the switch PW.	HUAWEI-PW-TC-MIBPwVcType Type Values: 0 other 1 frameRelayDlci 2 atmAal5SduVcc 3 atmTransparent 4 ethernetTagged 5 ethernet 6 hdlc 7 ppp 8 cem 9 atmCellNto1Vcc 10 atmCellNto1Vpc 11 ipLayer2Transport 12 atmCell1to1Vcc 13 atmCell1to1Vpc 14 atmAal5PduVcc 15 frameRelayPortMode 16 cep 17 e1Satop 18 t1Satop 19 e3Satop 20 t3Satop 21 basicCesPsn 22 basicTdmIp 23 tdmCasCesPsn 24 tdmCasTdmIp	.1.3.6.1.4.1.2011.5.12.8.1.2.4.1.10
hwPwCmdRemoteVcSwitchStatus Indicates the status of the switch PW.	VcStatusType Type Values: 1 down 2 up 3 plugout	.1.3.6.1.4.1.2011.5.12.8.1.2.4.1.11
hwPwCmdRemoteVcSwitchGroupID Indicates the Group ID field of the switch PW.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.4.1.12
hwPwCmdRemoteVcSwitchMtu Indicates the supported MTU size of the switch PW.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.4.1.13
hwPwCmdRemoteVcSwitchCw Indicates the control word capability of the switch PW.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.12.8.1.2.4.1.14
hwPwCmdRemoteVcSwitchMaxAtmCells Indicates the max cell supported of the switch PW when vctype is atm.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.4.1.15
hwPwCmdRemoteVcSwitchNotif Indicates notification is supported by the switch PW.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.12.8.1.2.4.1.16

This table specifies information for configuring and 
status monitoring for PW used in fixed network.
The indexes of this table are hwPwCmdAcBindingConnectIndex and hwPwCmdAcBindingPrimOrSecondary.

hwPwCmdAcBindingEntry row .1.3.6.1.4.1.2011.5.12.8.1.2.5.1

This table specifies information for configuring and
status monitoring for PW used in fixed network.
The indexes of this entry are hwPwCmdAcBindingConnectIndex and hwPwCmdAcBindingPrimOrSecondary.

Indexes

hwPwCmdAcBindingConnectIndex hwPwCmdAcBindingPrimOrSecondary

Column	Syntax	OID
hwPwCmdAcBindingConnectIndex Indicates the connect index referenced. Range: 1-32768	Unsigned32 Constraints: range: 1-32768	.1.3.6.1.4.1.2011.5.12.8.1.2.5.1.1
hwPwCmdAcBindingVcID Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element'. Range: 1-4294967295	Unsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.5.1.2
hwPwCmdAcBindingVcStatus Indicates the status of the PW: down(1), up(2), plugout(3).	VcStatusType Type Values: 1 down 2 up 3 plugout	.1.3.6.1.4.1.2011.5.12.8.1.2.5.1.3
hwPwCmdAcBindingTemplateName Indicates the description string of the template, MUST be NULL string if not applicable or not known yet.	OctetStringr/w Constraints: range: 1-19	.1.3.6.1.4.1.2011.5.12.8.1.2.5.1.4
hwPwCmdAcBindingOutboundVpi VPI value of this ATM VC. Range: 0-4095 If the pwVcType is atmNto1Transparent then the value will be set to zero.	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.2011.5.12.8.1.2.5.1.5
hwPwCmdAcBindingOutboundVci VCI value of this ATM VC. Range: 32-65535 If the pwVcType is atmNto1Transparent, atmCell1to1Vpc or atmCellNto1Vpc then the value should be set to zero.	Integer32r/w Constraints: range: 32-65535	.1.3.6.1.4.1.2011.5.12.8.1.2.5.1.6
hwPwCmdAcBindingSignalProtocol Set by the operator to indicate the protocol responsible for establishing this PW. The value 'static' is used in all cases where no maintenance protocol (PW signaling) is used to set up the PW, i.e. require configu…	SignalProtocolTyper/w Type Values: 1 ldp 2 static 3 udp	.1.3.6.1.4.1.2011.5.12.8.1.2.5.1.7
hwPwCmdAcBindingOutboundLabel The PW label used in the outbound direction (i.e. toward the PSN). Range: 16-1048575 It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 20 bits of…	Integer32r/w Constraints: range: 16-1048575	.1.3.6.1.4.1.2011.5.12.8.1.2.5.1.8
hwPwCmdAcBindingInboundLabel The PW label used in the inbound direction (i.e. packets received from the PSN. Range: 16-1048575 It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents th…	Integer32r/w Constraints: range: 16-1048575	.1.3.6.1.4.1.2011.5.12.8.1.2.5.1.9
hwPwCmdAcBindingRowStatus For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state.	Integer32r/w Constraints: range: 1-6	.1.3.6.1.4.1.2011.5.12.8.1.2.5.1.10
hwPwCmdAcBindingPrimOrSecondary This value indicate Primary PW or Secondary PW. Options: 1. primaryPW(1) -indicates primary PW 2. secondaryPW(2) -indicates secondary PW	Enumeration Enumerated Values: 1 primaryPW 2 secondaryPW	.1.3.6.1.4.1.2011.5.12.8.1.2.5.1.11

This table specifies information for configuring and 
status monitoring to pw template.
The index of this table is hwPwCmdTemplateIndex.

hwPwCmdTemplateEntry row .1.3.6.1.4.1.2011.5.12.8.1.2.7.1

This table specifies information for configuring and
status monitoring to pw template.
The index of this entry is hwPwCmdTemplateIndex.

Indexes

hwPwCmdTemplateIndex

Column	Syntax	OID
hwPwCmdTemplateIndex Index for the conceptual row identifying a PW template within this PW template table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.7.1.1
hwPwCmdTemplateName Indicates the description string of the template, MUST be NULL string if not applicable or not known yet.	OctetStringr/w Constraints: range: 1-19	.1.3.6.1.4.1.2011.5.12.8.1.2.7.1.2
hwPwCmdTemplateVcType This value indicate the service to be carried over this template.	HUAWEI-PW-TC-MIBPwVcTyper/w Type Values: 0 other 1 frameRelayDlci 2 atmAal5SduVcc 3 atmTransparent 4 ethernetTagged 5 ethernet 6 hdlc 7 ppp 8 cem 9 atmCellNto1Vcc 10 atmCellNto1Vpc 11 ipLayer2Transport 12 atmCell1to1Vcc 13 atmCell1to1Vpc 14 atmAal5PduVcc 15 frameRelayPortMode 16 cep 17 e1Satop 18 t1Satop 19 e3Satop 20 t3Satop 21 basicCesPsn 22 basicTdmIp 23 tdmCasCesPsn 24 tdmCasTdmIp	.1.3.6.1.4.1.2011.5.12.8.1.2.7.1.3
hwPwCmdTemplatePeerAddrType Denotes the address type of the peer node. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2011.5.12.8.1.2.7.1.4
hwPwCmdTemplatePeerAddr This object contains the value of the peer node address of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeros if not applicable (hwPwCmdTemplatePeerAddrType is 'unknown').	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.12.8.1.2.7.1.5
hwPwCmdTemplateMtu Indicates the supported MTU size of the switch PW. Range: 328-1710	Unsigned32r/w Constraints: range: 328-1710	.1.3.6.1.4.1.2011.5.12.8.1.2.7.1.6
hwPwCmdTemplateCw Indicates the control word capability of the switch PW.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.12.8.1.2.7.1.7
hwPwCmdTemplateVCCV Indicates the optional VCCV capabilities of the pw. Options: 1. ccCw(0) 2. ccAlert(1) 3. ccLabel(2) 4. cvIcmpping(3) 5. cvLspping(4) 6. cvBfd(5)	Bitsr/w Enumerated Values: 0 ccCw 1 ccAlert 2 ccLabel 3 cvIcmpping 4 cvLspping 5 cvBfd	.1.3.6.1.4.1.2011.5.12.8.1.2.7.1.8
hwPwCmdTemplateFrag Indicates whether or not fragmentation is supported.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.12.8.1.2.7.1.9
hwPwCmdTemplateBandwidth Indicates the bandwidth when signaling protocol is rsvp.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.7.1.10
hwPwCmdTemplateMaxAtmCells Indicates the max ATM cells when encapsulation is ATM. Range: 1-31 Default: 1	Unsigned32r/w Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.12.8.1.2.7.1.11
hwPwCmdTemplateTnlPolicyName Indicates the tunnel policy name used.	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.2011.5.12.8.1.2.7.1.12
hwPwCmdTemplateQoSBehaviorIndex Indicates the traffic behavior Index when QOS is implemented.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.12.8.1.2.7.1.13
hwPwCmdTemplateExplicitPathName Indicates the explicit path name set by the operator.	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.2011.5.12.8.1.2.7.1.14
hwPwCmdTemplateTdmJitterBuffer Indicates the jitter buffer size of TDM PW. Range: 500-128000 Default: 2000 Unit: microsecond	usUnsigned32r/w Constraints: range: 500-128000	.1.3.6.1.4.1.2011.5.12.8.1.2.7.1.15
hwPwCmdTemplateTdmLoadTime Indicates the load time value of TDM PW. Range: 125-5000 Default: 1000 Unit: byte	byteUnsigned32r/w Constraints: range: 125-5000	.1.3.6.1.4.1.2011.5.12.8.1.2.7.1.16
hwPwCmdTemplateTdmRTP Indicates enable or disable RTP of TDM PW. Options: 1. disable(0) -indicates disable RTP 2. enable(1) -indicates enable RTP Default: disable(0)	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.2011.5.12.8.1.2.7.1.17
hwPwCmdTemplateRowStatus For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.12.8.1.2.7.1.18
hwPwCmdTemplateTdmTimeSlotNum Indicates the time slot Num of TDM PW. Range: 1-32 Default: 32 Unit: byte	byteUnsigned32r/w Constraints: range: 1-32	.1.3.6.1.4.1.2011.5.12.8.1.2.7.1.19
hwPwCmdTemplateMaxEncapcellDelay Indicates the Max ATM cells encapsulate delay time. Range: 0-50 Default: 0 Unit: millisecond	msUnsigned32r/w Constraints: range: 0-50	.1.3.6.1.4.1.2011.5.12.8.1.2.7.1.20
hwPwCmdTemplateFlowLabel Indicates the optional flow label capabilities of the pw.	Bitsr/w Enumerated Values: 0 sip 1 dip 2 smac 3 dmac	.1.3.6.1.4.1.2011.5.12.8.1.2.7.1.21

This table specifies the reset operation that can be
done to the PW or PW template.
The index of this table is hwPwCmdOperIndex.

hwPwCmdOperEntry row .1.3.6.1.4.1.2011.5.12.8.1.2.8.1

This table specifies the reset operation that can be
done to the PW or PW template.
The index of this entry is hwPwCmdOperIndex.

Indexes

hwPwCmdOperIndex

Column	Syntax	OID
hwPwCmdOperIndex Index for the conceptual row.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.8.1.1
hwPwCmdOperType Specifies the reset object. Options: 1. vcindex(1) -indicates PW index 2. pwtindex(2) -indicates PW template index	Enumerationr/w Enumerated Values: 1 vcindex 2 pwtindex	.1.3.6.1.4.1.2011.5.12.8.1.2.8.1.2
hwPwCmdOperVcOrPwtIndex Specifies the object index to be reset.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.8.1.3
hwPwCmdOperStatus Indicates the result of the reset operation. Options: 1. success(1) -indicates operation success 2. pwNotExist(2) -indicates PW not exist 3. pwTemplateNotExist(3) -indicates PW template not exist 4. r…	Enumeration Enumerated Values: 1 success 2 pwNotExist 3 pwTemplateNotExist 4 resetFailure 5 unknown	.1.3.6.1.4.1.2011.5.12.8.1.2.8.1.4
hwPwCmdOperTimeStamp Specifies the total time since last reset operation has been done.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2011.5.12.8.1.2.8.1.5
hwPwCmdOperRowStatus For creating and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.12.8.1.2.8.1.6

This table specifies information for configuring and 
status monitoring for PW used in fixed network.
The indexes of this table are hwPwCmdAcVlanBindingVlanID and hwPwCmdAcVlanBindingPrimOrSecondary.

hwPwCmdAcVlanBindingEntry row .1.3.6.1.4.1.2011.5.12.8.1.2.10.1

This table specifies information for configuring and
status monitoring for PW used in fixed network.
The indexes of this entry are hwPwCmdAcVlanBindingVlanID and hwPwCmdAcVlanBindingPrimOrSecondary.

Indexes

hwPwCmdAcVlanBindingVlanID hwPwCmdAcVlanBindingPrimOrSecondary

Column	Syntax	OID
hwPwCmdAcVlanBindingVlanID Indicates the VLAN ID referenced. Range: 2-4093	Unsigned32 Constraints: range: 2-4093	.1.3.6.1.4.1.2011.5.12.8.1.2.10.1.1
hwPwCmdAcVlanBindingVcID Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element'. Range: 1-4294967295	Unsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.10.1.2
hwPwCmdAcVlanBindingVcStatus Indicates the status of the PW: down(1), up(2), plugout(3).	VcStatusType Type Values: 1 down 2 up 3 plugout	.1.3.6.1.4.1.2011.5.12.8.1.2.10.1.3
hwPwCmdAcVlanBindingTemplateName Indicates the description string of the template, MUST be NULL string if not applicable or not known yet.	OctetStringr/w Constraints: range: 1-19	.1.3.6.1.4.1.2011.5.12.8.1.2.10.1.4
hwPwCmdAcVlanBindingSignalProtocol Set by the operator to indicate the protocol responsible for establishing this PW. The value 'static' is used in all cases where no maintenance protocol (PW signaling) is used to set up the PW, i.e. require configu…	SignalProtocolTyper/w Type Values: 1 ldp 2 static 3 udp	.1.3.6.1.4.1.2011.5.12.8.1.2.10.1.5
hwPwCmdAcVlanBindingOutboundLabel The PW label used in the outbound direction (i.e. toward the PSN). Range: 16-1048575 It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 20 bits of…	Integer32r/w Constraints: range: 16-1048575	.1.3.6.1.4.1.2011.5.12.8.1.2.10.1.6
hwPwCmdAcVlanBindingInboundLabel The PW label used in the inbound direction (i.e. packets received from the PSN. Range: 16-1048575 It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents th…	Integer32r/w Constraints: range: 16-1048575	.1.3.6.1.4.1.2011.5.12.8.1.2.10.1.7
hwPwCmdAcVlanBindingRowStatus For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state.	Integer32r/w Constraints: range: 1-6	.1.3.6.1.4.1.2011.5.12.8.1.2.10.1.8
hwPwCmdAcVlanBindingPrimOrSecondary This value indicate Primary PW or Secondary PW. Options: 1. primaryPW(1) -indicates primary PW 2. secondaryPW(2) -indicates secondary PW	Enumeration Enumerated Values: 1 primaryPW 2 secondaryPW	.1.3.6.1.4.1.2011.5.12.8.1.2.10.1.9

This table specifies information for configuring and 
status monitoring for PW used in fixed network.
The indexes of this table are ifIndex, hwPwCmdAcPvpBindingVpi and hwPwCmdAcPvpBindingPrimOrSecondary.

hwPwCmdAcPvpBindingEntry row .1.3.6.1.4.1.2011.5.12.8.1.2.11.1

This table specifies information for configuring and
status monitoring for PW used in fixed network.
The indexes of this entry are ifIndex, hwPwCmdAcPvpBindingVpi and hwPwCmdAcPvpBindingPrimOrSecondary.

Indexes

IF-MIBifIndex hwPwCmdAcPvpBindingVpi hwPwCmdAcPvpBindingPrimOrSecondary

Column	Syntax	OID
hwPwCmdAcPvpBindingVpi Indicates the VPI value. Range: 0-4095	Unsigned32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.2011.5.12.8.1.2.11.1.1
hwPwCmdAcPvpBindingVcID Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element'. Range: 1-4294967295	Unsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.11.1.2
hwPwCmdAcPvpBindingVcStatus Indicates the status of the PW: down(1), up(2), plugout(3).	VcStatusType Type Values: 1 down 2 up 3 plugout	.1.3.6.1.4.1.2011.5.12.8.1.2.11.1.3
hwPwCmdAcPvpBindingTemplateName Indicates the description string of the template, MUST be NULL string if not applicable or not known yet.	OctetStringr/w Constraints: range: 1-19	.1.3.6.1.4.1.2011.5.12.8.1.2.11.1.4
hwPwCmdAcPvpBindingOutboundVpi Outbound VPI value of this ATM VC. Range: 0-4095	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.2011.5.12.8.1.2.11.1.5
hwPwCmdAcPvpBindingSignalProtocol Set by the operator to indicate the protocol responsible for establishing this PW. The value 'static' is used in all cases where no maintenance protocol (PW signaling) is used to set up the PW, i.e. require configu…	SignalProtocolTyper/w Type Values: 1 ldp 2 static 3 udp	.1.3.6.1.4.1.2011.5.12.8.1.2.11.1.6
hwPwCmdAcPvpBindingOutboundLabel The PW label used in the outbound direction (i.e. toward the PSN). Range: 16-1048575 It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 20 bits of…	Integer32r/w Constraints: range: 16-1048575	.1.3.6.1.4.1.2011.5.12.8.1.2.11.1.7
hwPwCmdAcPvpBindingInboundLabel The PW label used in the inbound direction (i.e. packets received from the PSN. Range: 16-1048575 It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents th…	Integer32r/w Constraints: range: 16-1048575	.1.3.6.1.4.1.2011.5.12.8.1.2.11.1.8
hwPwCmdAcPvpBindingPrimOrSecondary This value indicate Primary PW or Secondary PW. Options: 1. primaryPW(1) -indicates primary PW 2. secondaryPW(2) -indicates secondary PW	Enumerationr/w Enumerated Values: 1 primaryPW 2 secondaryPW	.1.3.6.1.4.1.2011.5.12.8.1.2.11.1.9
hwPwCmdAcPvpBindingRowStatus For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state.	Integer32r/w Constraints: range: 1-6	.1.3.6.1.4.1.2011.5.12.8.1.2.11.1.10

This table specifies information for VCCV ping.
The index of this table is hwPwCmdVccvVcID.

hwPwCmdVccvEntry row .1.3.6.1.4.1.2011.5.12.8.1.2.12.1

This table specifies information for VCCV ping.
The index of this entry is hwPwCmdVccvVcID.

Indexes

hwPwCmdVccvVcID

Column	Syntax	OID
hwPwCmdVccvVcID This value indicate PW ID. Range: 1-4294967294	Unsigned32r/w Constraints: range: 1-4294967294	.1.3.6.1.4.1.2011.5.12.8.1.2.12.1.1
hwPwCmdVccvReplyMode The reply mode for the VCCV packet. Options: 1. doNotReply(1) -indicates that there is no reply for VCCV PING 2. replyViaAnIPv4IPv6UdpPacket(2) -indicates that reply for VC…	Enumerationr/w Enumerated Values: 1 doNotReply 2 replyViaAnIPv4IPv6UdpPacket 3 replyViaAnIPv4IPv6UdpPacketWithRouterAlert 4 replyViaApplicationLevelControlChannel	.1.3.6.1.4.1.2011.5.12.8.1.2.12.1.2
hwPwCmdVccvFrequency The frequency of VCCV packet. Options: 1. freq1000ms(1000) -indicates VCCV PING frequency, interval is 1000 ms 2. freq2000ms(2000) -indicates VCCV PING frequency, interval is 2000 ms 3. freq5000ms(5000) -indicates…	Enumerationr/w Enumerated Values: 1000 freq1000ms 2000 freq2000ms 5000 freq5000ms 10000 freq10000ms	.1.3.6.1.4.1.2011.5.12.8.1.2.12.1.3
hwPwCmdVccvTimeoutLimit The timeout limit of VCCV ping. Range: 3-16	Unsigned32r/w Constraints: range: 3-16	.1.3.6.1.4.1.2011.5.12.8.1.2.12.1.4
hwPwCmdVccvRecoverLimit The recover limit of VCCV ping. Range: 1-16	Unsigned32r/w Constraints: range: 1-16	.1.3.6.1.4.1.2011.5.12.8.1.2.12.1.5
hwPwCmdVccvRemotePwVcID Indicates the PW Remote VcID in MH-PW. Range: 1-4294967295. When this leaf is set to 4294967295, it means that no remote PW ID is configured in the case of no creation, and that the configuration of remote PW ID is c…	Unsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.12.1.6
hwPwCmdVccvRemoteIpAddress Indicates the PW Remote IP address in MH-PW.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.12.8.1.2.12.1.7
hwPwCmdVccvTtl Indicates the PW TTL value. Range: 0-255. When this leaf is set to 0, it means that no ttl value is configured in the case of no creation, and that the configuration of TTL value is canceled in the case of modify operat…	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.5.12.8.1.2.12.1.8
hwPwCmdVccvPingStatus Indicates the VCCV ping status. Options: 1. normal(0) -indicates that VCCV PING can get reply from the peer and the PW connection is normal 2. break(1) -indicates that VCCV PING cannot reach the peer and the PW con…	Enumeration Enumerated Values: 0 normal 1 break 2 inactive	.1.3.6.1.4.1.2011.5.12.8.1.2.12.1.9
hwPwCmdVccvPingSuccessNum The number of VCCV ping succeed. Range: 0-4294967295	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.12.1.10
hwPwCmdVccvPingTimeOutNum The number of VCCV ping time out. Range: 0-4294967295	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.12.1.11
hwPwCmdVccvRowStatus For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state. Options: 1. active(1) -indicates query operation 2. createAn…	Integer32r/w Constraints: range: 1-6	.1.3.6.1.4.1.2011.5.12.8.1.2.12.1.12
hwPwCmdVccvPingPipeUniform For setting VCCV ping mode. Options: 1. pipe(1) -indicates pipe mode of the VCCV ping. 2. uniform(2) -indicates uniform mode of the VCCV ping. Default: pipe(1)	Enumerationr/w Enumerated Values: 1 pipe 2 uniform	.1.3.6.1.4.1.2011.5.12.8.1.2.12.1.13

This table specifies information for recover mode of the PW.
The index of this table is hwPwCmdRecoverVcID.

hwPwCmdRecoverEntry row .1.3.6.1.4.1.2011.5.12.8.1.2.13.1

This table specifies information for recover mode of the PW.
The index of this entry is hwPwCmdRecoverVcID.

Indexes

hwPwCmdRecoverVcID

Column	Syntax	OID
hwPwCmdRecoverVcID Indicates the PW ID. Range: 1-4294967294	Unsigned32 Constraints: range: 1-4294967294	.1.3.6.1.4.1.2011.5.12.8.1.2.13.1.1
hwPwCmdRecoverType Indicates the recover mode of the PW. Options: 1. revertive(1) -indicates that automatic recovery is allowed 2. nonRevertive(2) -indicates that the traffic will not be switched back to the working PW automatically	Enumerationr/w Enumerated Values: 1 revertive 2 nonRevertive	.1.3.6.1.4.1.2011.5.12.8.1.2.13.1.2
hwPwCmdRecoverWtrtime Indicates the recover time. Range: 0,10-600 Unit: second	Unsigned32r/w Constraints: range: 0-0 range: 10-600	.1.3.6.1.4.1.2011.5.12.8.1.2.13.1.3

This table specifies information for manual switchover.
The index of this table is hwPwCmdManualSwitchoverVcID.

hwPwCmdManualSwitchoverEntry row .1.3.6.1.4.1.2011.5.12.8.1.2.14.1

This table specifies information for manual switchover.
The index of this entry is hwPwCmdManualSwitchoverVcID.

Indexes

hwPwCmdManualSwitchoverVcID

Column	Syntax	OID
hwPwCmdManualSwitchoverVcID Indicates the primary PW ID. Range: 1-4294967294	Unsigned32 Constraints: range: 1-4294967294	.1.3.6.1.4.1.2011.5.12.8.1.2.14.1.1
hwPwCmdManualSwitchoverSwitchType Indicates the type of manual switchover. Options: 1. primaryPW(1) -indicates switch from primary PW to secondary PW 2. secondaryPW(2) -indicates switch from secondary PW to primary PW	Enumerationr/w Enumerated Values: 1 primaryPW 2 secondaryPW	.1.3.6.1.4.1.2011.5.12.8.1.2.14.1.2

This table specifies information for 
local and remote IP address to switch over.
The index of this table is hwPwCmdSwitchoverPwId.

hwPwCmdSwitchoverIpAddrEntry row .1.3.6.1.4.1.2011.5.12.8.1.2.15.1

This table specifies information for
local and remote IP address to switch over.
The index of this entry is hwPwCmdSwitchoverPwId.

Indexes

hwPwCmdSwitchoverPwId

Column	Syntax	OID
hwPwCmdSwitchoverPwId Indicates the primary PW ID. Range: 1-4294967295	Unsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.15.1.1
hwPwCmdSwitchoverLocalIpAddr Indicates switch over local IP address of PW.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.12.8.1.2.15.1.2
hwPwCmdSwitchoverRemoteIpAddr Indicates switch over remote IP address of PW.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.12.8.1.2.15.1.3
hwPwCmdSwitchoverRowStatus For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state.	Integer32r/w Constraints: range: 1-6	.1.3.6.1.4.1.2011.5.12.8.1.2.15.1.4

This table specifies information for status of PW protect group.
The index of this table is hwPwCmdPsPwId.

hwPwCmdPsStatusEntry row .1.3.6.1.4.1.2011.5.12.8.1.2.16.1

This table specifies information for status of PW protect group.
The index of this entry is hwPwCmdPsPwId.

Indexes

hwPwCmdPsPwId

Column	Syntax	OID
hwPwCmdPsPwId Indicates the primary PW ID. Range: 1-4294967294	Unsigned32 Constraints: range: 1-4294967294	.1.3.6.1.4.1.2011.5.12.8.1.2.16.1.1
hwPwCmdPsPrimaryPwStatus Indicates status of primary PW. Options: 1. down(1) -indicates that the primary member of the PW protect group is down 2. upActive(2) -indicates that the primary member of the PW protect group is up and active 3. …	Enumeration Enumerated Values: 1 down 2 upActive 3 upStandby	.1.3.6.1.4.1.2011.5.12.8.1.2.16.1.2
hwPwCmdPsSecondaryPwStatus Indicates status of secondary PW. Options: 1. down(1) -indicates that the secondary member of the PW protect group is down 2. upActive(2) -indicates that the secondary member of the PW protect group is up and acti…	Enumeration Enumerated Values: 1 down 2 upActive 3 upStandby	.1.3.6.1.4.1.2011.5.12.8.1.2.16.1.3

This table specifies information for PVC-EXP mapping.
The indexes of this table are ifIndex, hwPwCmdPvcExpMapVpi, hwPwCmdPvcExpMapVci.

hwPwCmdPvcExpMapEntry row .1.3.6.1.4.1.2011.5.12.8.1.2.17.1

This table specifies information for PVC-EXP mapping.
The indexes of this entry are ifIndex, hwPwCmdPvcExpMapVpi, hwPwCmdPvcExpMapVci.

Indexes

IF-MIBifIndex hwPwCmdPvcExpMapVpi hwPwCmdPvcExpMapVci

Column	Syntax	OID
hwPwCmdPvcExpMapVpi Indicates the VPI value. Range: 0-4095	Unsigned32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.2011.5.12.8.1.2.17.1.1
hwPwCmdPvcExpMapVci Indicates the VCI value. Range: 32-65535	Unsigned32r/w Constraints: range: 32-65535	.1.3.6.1.4.1.2011.5.12.8.1.2.17.1.2
hwPwCmdPvcExpMapExp Indicates the EXP value. Range: 0-7	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.5.12.8.1.2.17.1.3
hwPwCmdPvcExpMapRowStatus For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state. Options: 1. active(1) -indicates query operation 2. createAn…	Integer32r/w Constraints: range: 1-6	.1.3.6.1.4.1.2011.5.12.8.1.2.17.1.4

This table specifies information for EXP-COS mapping.
The index of this table is hwPwCmdExpCosMapExp.

hwPwCmdExpCosMapEntry row .1.3.6.1.4.1.2011.5.12.8.1.2.18.1

This table specifies information for EXP-COS mapping.
The index of this entry is hwPwCmdExpCosMapExp.

Indexes

hwPwCmdExpCosMapExp

Column	Syntax	OID
hwPwCmdExpCosMapExp Indicates the EXP value. Range: 0-7	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.5.12.8.1.2.18.1.1
hwPwCmdExpCosMapCos Indicates the COS value. Range: 0-7	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.5.12.8.1.2.18.1.2

This table specifies information for TDM-EXP mapping.
The index of this table is hwPwCmdTdmConnectId.

hwPwCmdTdmExpMapEntry row .1.3.6.1.4.1.2011.5.12.8.1.2.19.1

This table specifies information for TDM-EXP mapping.
The index of this entry is hwPwCmdTdmConnectId.

Indexes

hwPwCmdTdmConnectId

Column	Syntax	OID
hwPwCmdTdmConnectId Indicates the TDM connect ID. Range: 0-2047	Unsigned32r/w Constraints: range: 0-2047	.1.3.6.1.4.1.2011.5.12.8.1.2.19.1.1
hwPwCmdTdmExpMapExp Indicates the EXP value. Range: 0-7 Default: 0	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.5.12.8.1.2.19.1.2
hwPwCmdTdmExpMapRowStatus For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state. Options: 1. active(1) -indicates query operation 2. createAn…	Integer32r/w Constraints: range: 1-6	.1.3.6.1.4.1.2011.5.12.8.1.2.19.1.3

This table specifies information for configuring and 
status monitoring for PW used in fixed network.
The indexes of this table are hwPwCmdAcTdmBindingTdmConnectId and hwPwCmdAcTdmBindingPrimOrSecondary.

hwPwCmdAcTdmBindingEntry row .1.3.6.1.4.1.2011.5.12.8.1.2.20.1

This table specifies information for configuring and
status monitoring for PW used in fixed network.
The indexes of this entry are hwPwCmdAcTdmBindingTdmConnectId and hwPwCmdAcTdmBindingPrimOrSecondary.

Indexes

hwPwCmdAcTdmBindingTdmConnectId hwPwCmdAcTdmBindingPrimOrSecondary

Column	Syntax	OID
hwPwCmdAcTdmBindingTdmConnectId Indicates the connect index referenced. Range: 0-1023	Unsigned32r/w Constraints: range: 0-1023	.1.3.6.1.4.1.2011.5.12.8.1.2.20.1.1
hwPwCmdAcTdmBindingVcID Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element'. Range: 1-4294967294	Unsigned32r/w Constraints: range: 1-4294967294	.1.3.6.1.4.1.2011.5.12.8.1.2.20.1.2
hwPwCmdAcTdmBindingVcStatus Indicates the status of the PW: down(1), up(2), plugout(3).	VcStatusTyper/w Type Values: 1 down 2 up 3 plugout	.1.3.6.1.4.1.2011.5.12.8.1.2.20.1.3
hwPwCmdAcTdmBindingTemplateName Indicates the description string of the template, MUST be NULL string if not applicable or not known yet.	OctetStringr/w Constraints: range: 1-19	.1.3.6.1.4.1.2011.5.12.8.1.2.20.1.4
hwPwCmdAcTdmBindingEncapUDPPort Indicates UDP protocol encapsulation, UDP destination port. Range: 50000-57300	Integer32r/w Constraints: range: 50000-57300	.1.3.6.1.4.1.2011.5.12.8.1.2.20.1.5
hwPwCmdAcTdmBindingSignalProtocol Set by the operator to indicate the protocol responsible for establishing this PW. The value 'static' is used in all cases where no maintenance protocol (PW signaling) is used to set up the PW, i.e. require configu…	SignalProtocolTyper/w Type Values: 1 ldp 2 static 3 udp	.1.3.6.1.4.1.2011.5.12.8.1.2.20.1.6
hwPwCmdAcTdmBindingOutboundLabel The PW label used in the outbound direction (i.e. toward the PSN). Range: 16-1048575 It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 20 bits of…	Integer32r/w Constraints: range: 16-1048575	.1.3.6.1.4.1.2011.5.12.8.1.2.20.1.7
hwPwCmdAcTdmBindingInboundLabel The PW label used in the inbound direction (i.e. packets received from the PSN. Range: 16-1048575 It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents th…	Integer32r/w Constraints: range: 16-1048575	.1.3.6.1.4.1.2011.5.12.8.1.2.20.1.8
hwPwCmdAcTdmBindingPrimOrSecondary This value indicate Primary PW or Secondary PW. Options: 1. primaryPW(1) -indicates primary PW 2. secondaryPW(2) -indicates secondary PW	Enumerationr/w Enumerated Values: 1 primaryPW 2 secondaryPW	.1.3.6.1.4.1.2011.5.12.8.1.2.20.1.9
hwPwCmdAcTdmBindingRowStatus For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state.	Integer32r/w Constraints: range: 1-6	.1.3.6.1.4.1.2011.5.12.8.1.2.20.1.10

This table specifies information for configuring and 
status monitoring for PW used in fixed network.
The index of this table is hwPwCmdPwID.

hwPwCmdPwEntry row .1.3.6.1.4.1.2011.5.12.8.1.2.21.1

This table specifies information for configuring and
status monitoring for PW used in fixed network.
The index of this entry is hwPwCmdPwID.

Indexes

hwPwCmdPwID

Column	Syntax	OID
hwPwCmdPwID Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element'. Range: 1-4294967294	Unsigned32r/w Constraints: range: 1-4294967294	.1.3.6.1.4.1.2011.5.12.8.1.2.21.1.1
hwPwCmdPwTemplateName Indicates the description string of the template, MUST be NULL string if not applicable or not known yet.	OctetStringr/w Constraints: range: 1-19	.1.3.6.1.4.1.2011.5.12.8.1.2.21.1.2
hwPwCmdPwAcBindMode AcType. Options: 1. vlan(1) -indicates vlan 2. tdm(2) -indicates tdm 3. pvcfsp(3) -indicates pvc fsp 4. pvpfsp(4) -indicates pvp fsp	Enumerationr/w Enumerated Values: 1 vlan 2 tdm 3 pvcfsp 4 pvpfsp	.1.3.6.1.4.1.2011.5.12.8.1.2.21.1.3
hwPwCmdPwVlanID Indicates the VLAN ID referenced. Range: 2-4093	Unsigned32 Constraints: range: 2-4093	.1.3.6.1.4.1.2011.5.12.8.1.2.21.1.4
hwPwCmdPwTdmVclID Indicates the connect index referenced. Range: 0-2047, 4294967295	Unsigned32r/w Constraints: range: 0-2047 range: 4294967295-4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.21.1.5
hwPwCmdPwIfindex Index of the interface (or the virtual interface) associated with the PW. Range: 1-2147483647, -1	Integer32r/w Constraints: range: -1--1 range: 1-2147483647	.1.3.6.1.4.1.2011.5.12.8.1.2.21.1.6
hwPwCmdPwVci Indicates the VPI value. Range: 32-65535, -1	Integer32r/w Constraints: range: -1--1 range: 32-65535	.1.3.6.1.4.1.2011.5.12.8.1.2.21.1.7
hwPwCmdPwVpi Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element'. Range: 0-4095, -1	Integer32r/w Constraints: range: -1-4095	.1.3.6.1.4.1.2011.5.12.8.1.2.21.1.8
hwPwCmdPwOutboundVci VCI value of this ATM VC. Range: 32-65535, -1 If the pwVcType is atmNto1Transparent, atmCell1to1Vpc or atmCellNto1Vpc then the value should be set to zero.	Integer32r/w Constraints: range: -1--1 range: 32-65535	.1.3.6.1.4.1.2011.5.12.8.1.2.21.1.9
hwPwCmdPwOutboundVpi VPI value of this ATM VC. Range: 0-4095, -1 If the pwVcType is atmNto1Transparent then the value will be set to zero.	Integer32r/w Constraints: range: -1-4095	.1.3.6.1.4.1.2011.5.12.8.1.2.21.1.10
hwPwCmdPwImaGroup Indicates the VLAN ID referenced. Range: 0-4294967294	Unsigned32 Constraints: range: 0-4294967294	.1.3.6.1.4.1.2011.5.12.8.1.2.21.1.11
hwPwCmdPwVcStatus Indicates the status of the PW: down(1), up(2), plugout(3).	VcStatusType Type Values: 1 down 2 up 3 plugout	.1.3.6.1.4.1.2011.5.12.8.1.2.21.1.12
hwPwCmdPwEncapSrcUDPPort Indicates UDP protocol encapsulation, UDP destination port. Range: 50000-57300, -1	Integer32r/w Constraints: range: -1--1 range: 50000-57300	.1.3.6.1.4.1.2011.5.12.8.1.2.21.1.13
hwPwCmdPwEncapDstUDPPort Indicates UDP protocol encapsulation, UDP destination port. Range: 49152-65535, -1	Integer32r/w Constraints: range: -1--1 range: 49152-65535	.1.3.6.1.4.1.2011.5.12.8.1.2.21.1.14
hwPwCmdPwSignalProtocol Set by the operator to indicate the protocol responsible for establishing this PW. The value 'static' is used in all cases where no maintenance protocol (PW signaling) is used to set up the PW, i.e. require configu…	SignalProtocolTyper/w Type Values: 1 ldp 2 static 3 udp	.1.3.6.1.4.1.2011.5.12.8.1.2.21.1.15
hwPwCmdPwOutboundLabel The PW label used in the outbound direction (i.e. toward the PSN). Range: 16-1048575, -1 It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 20 bits…	Integer32r/w Constraints: range: -1--1 range: 16-1048575	.1.3.6.1.4.1.2011.5.12.8.1.2.21.1.16
hwPwCmdPwInboundLabel The PW label used in the inbound direction (i.e. packets received from the PSN. Range: 16-1048575 It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents th…	Unsigned32r/w Constraints: range: 16-1048575	.1.3.6.1.4.1.2011.5.12.8.1.2.21.1.17
hwPwCmdPwPriority This value indicate Primary PW or Secondary PW. Options: 1. primaryPW(1) -indicates primary PW 2. secondaryPW(2) -indicates secondary PW	Enumerationr/w Enumerated Values: 1 primaryPW 2 secondaryPW	.1.3.6.1.4.1.2011.5.12.8.1.2.21.1.18
hwPwCmdPwRowStatus For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state.	Integer32r/w Constraints: range: 1-6	.1.3.6.1.4.1.2011.5.12.8.1.2.21.1.19
hwPwCmdPwDesc PW description, used to describe extra information of PW.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.12.8.1.2.21.1.20
hwPwCmdPwReceiveDstUDPPort Indicates UDP protocol encapsulation, UDP source port. Range: 50048-50111, -1	Integer32r/w Constraints: range: -1--1 range: 50048-50111	.1.3.6.1.4.1.2011.5.12.8.1.2.21.1.21
hwPwCmdPwMultiPvc Multi VCCs or VPCs string, include vpi,vci,outvpi and outvci.	OctetStringr/w Constraints: range: 0-800	.1.3.6.1.4.1.2011.5.12.8.1.2.21.1.22
hwPwCmdPwMultiPvcOp Multi VCCs or VPCs operate code, add or delete. Options: 1. add(1) -indicates add operation 2. delete(2) -indicates delete operation 3. invalidValue(-1) -indicates invalid value	Enumerationr/w Enumerated Values: -1 invalidValue 1 add 2 delete	.1.3.6.1.4.1.2011.5.12.8.1.2.21.1.23

This table specifies information for PW CAR.
The index of this table is hwPwCmdPWCarVcID.

hwPwCmdPwCarEntry row .1.3.6.1.4.1.2011.5.12.8.1.2.22.1

This table specifies information for PW CAR.
The index of this entry is hwPwCmdPWCarVcID.

Indexes

hwPwCmdPWCarVcID

Column	Syntax	OID
hwPwCmdPWCarVcID Indicates the PW ID. Range: 1-4294967294	Unsigned32 Constraints: range: 1-4294967294	.1.3.6.1.4.1.2011.5.12.8.1.2.22.1.1
hwPwCmdPWCarRowStatus For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state. Options: 1. active(1) -indicates query operation 2. createAn…	Integer32r/w Constraints: range: 1-6	.1.3.6.1.4.1.2011.5.12.8.1.2.22.1.4
hwPwCmdPWCarCir Committed information rate, it is the necessary parameter for adding pw car. Range: 1-1048575 Unit: 64Kbit/s	Unsigned32r/w Constraints: range: 1-1048575	.1.3.6.1.4.1.2011.5.12.8.1.2.22.1.5
hwPwCmdPWCarCbs Committed burst size, default value is ((cir+8191)/8192+1). Range: 1-32767 Unit: 2KByte/s	Unsigned32r/w Constraints: range: 1-32767	.1.3.6.1.4.1.2011.5.12.8.1.2.22.1.6
hwPwCmdPWCarPir Peak information rate, default value is double of committed information rate. Range: 1-1048575 Unit: 64Kbit/s	Unsigned32r/w Constraints: range: 1-1048575	.1.3.6.1.4.1.2011.5.12.8.1.2.22.1.7
hwPwCmdPWCarPbs Peak burst size, default value is MAX(((pir+8191)/8192 + 1), cbs). Range: 1-32767 Unit: 2KByte/s	Unsigned32r/w Constraints: range: 1-32767	.1.3.6.1.4.1.2011.5.12.8.1.2.22.1.8

This table specifies information for PVP-EXP mapping.
The indexes of this table are ifIndex and hwPwCmdPvpExpMapVpi.

hwPwCmdPvpExpMapEntry row .1.3.6.1.4.1.2011.5.12.8.1.2.23.1

This table specifies information for PVP-EXP mapping.
The indexes of this entry are ifIndex and hwPwCmdPvpExpMapVpi.

Indexes

IF-MIBifIndex hwPwCmdPvpExpMapVpi

Column	Syntax	OID
hwPwCmdPvpExpMapVpi Indicates the VPI value. Range: 0-4095	Unsigned32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.2011.5.12.8.1.2.23.1.1
hwPwCmdPvpExpMapExp Indicates the EXP value. Range: 0-7	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.5.12.8.1.2.23.1.2
hwPwCmdPvpExpMapRowStatus For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state. Options: 1. active(1) -indicates query operation 2. createAn…	Integer32r/w Constraints: range: 1-6	.1.3.6.1.4.1.2011.5.12.8.1.2.23.1.3

This table specifies the extend information for configuring and
status monitoring that are common to all service types
and PSN types.
The index of this table is pwIndex.

hwPwExtEntry row .1.3.6.1.4.1.2011.5.12.8.1.2.26.1

This table specifies the extend information for configuring and
status monitoring that are common to all service types
and PSN types.
The index of this entry is pwIndex.

Indexes

PW-STD-MIBpwIndex

Column	Syntax	OID
hwPwPriority This value indicate Primary PW or Secondary PW. Options: 1. primaryPW(1) -indicates the primary member of the PW protect group 2. secondaryPW(2) -indicates the secondary member of the PW protect group	Enumerationr/w Enumerated Values: 1 primaryPW 2 secondaryPW	.1.3.6.1.4.1.2011.5.12.8.1.2.26.1.1
hwPwPrimaryPwIndex The value that represents the corresponding primary PW in the pwTable.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.26.1.2
hwPwVCCVCapabilities Config the optional VCCV capabilities of the PW.	Bitsr/w Enumerated Values: 0 ccCw 1 ccAlert 2 ccTTL 3 cvIcmpping 4 cvLspping 5 cvBfd	.1.3.6.1.4.1.2011.5.12.8.1.2.26.1.3
hwPwVCCVStatus Indicates the optional VCCV capabilities of the PW.	Bits Enumerated Values: 0 ccCw 1 ccAlert 2 ccTTL 3 cvIcmpping 4 cvLspping 5 cvBfd	.1.3.6.1.4.1.2011.5.12.8.1.2.26.1.4
hwPwFlowLabel Indicates the optional flow label capabilities of the PW.	Bitsr/w Enumerated Values: 0 sip 1 dip 2 smac 3 dmac	.1.3.6.1.4.1.2011.5.12.8.1.2.26.1.5
hwPwAtmCfgTimeout Indicates max ATM cells encapsulation delay time. Range: 0-50 Default: 0 Unit: millisecond	Unsigned32r/w Constraints: range: 0-50	.1.3.6.1.4.1.2011.5.12.8.1.2.26.1.6
hwPwPriMappingProfName QoS priority mapping profile name for PW, a string of 1-32 characters. There are all together 92 valid characters for the name. These characters include the following: uppercase and lowercase English letters (52 char…	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.2011.5.12.8.1.2.26.1.7
hwPwFlowLabelCapabilities Indicates the PW flow label capability.	Bitsr/w Enumerated Values: 0 receive 1 transmit	.1.3.6.1.4.1.2011.5.12.8.1.2.26.1.8
hwPwFlowlabelStatus Indicates the negotiation result of the PW flow label capability. The negotiation result of static PW is consistent with local configuration.	Bits Enumerated Values: 0 receive 1 transmit	.1.3.6.1.4.1.2011.5.12.8.1.2.26.1.9
hwPwStatisticSwitch Used to enable or disable the traffic statistic function of pw. Options: 1. enable(1) -indicates that the traffic statistic function is enabled 2. disable(2) -indicates that the traffic statistic function is disabled D…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.12.8.1.2.26.1.10
hwPwTnlPolicy Used to configure the tunnel policy used by the PW.	OctetStringr/w Constraints: range: 0-39	.1.3.6.1.4.1.2011.5.12.8.1.2.26.1.11
hwPwPayloadType The payload type in RTP header. Range: 0-127 Default: 0	Integer32r/w Constraints: range: 0-127	.1.3.6.1.4.1.2011.5.12.8.1.2.26.1.12
hwPwSnStartNum The sn start number in RTP header. Range: 0-1 Default: 0	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.2011.5.12.8.1.2.26.1.13
hwPwRcvSsrcId The recieve SSRC ID in RTP header. Default: 0	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.26.1.14
hwPwTxSsrcId The transmit SSRC ID in RTP header. Default: 0	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.26.1.15

This table is a read-only table. The purpose of 
this table is to keep statistical information about
the TDM failure alarm. The index of this table is pwIndex.

hwPwCmdTdmDefectStatsEntry row .1.3.6.1.4.1.2011.5.12.8.1.2.27.1

This table is a read-only table. The purpose of
this table is to keep statistical information about
the TDM failure alarm.
The index of this entry is pwIndex.

Indexes

PW-STD-MIBpwIndex

Column	Syntax	OID
hwPwCmdTdmDefectStatsJtrBfrOverRun Indicates the number of times that the jitter buffer overrun.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.27.1.1
hwPwCmdTdmDefectStatsJtrBfrOverRunClear Indicates the number of times that the system is restored from overrun of the jitter buffer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.27.1.2
hwPwCmdTdmDefectStatsJtrBfrUnderRun Indicates the number of times that the jitter buffer overrun.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.27.1.3
hwPwCmdTdmDefectStatsJtrBfrUnderRunClear Indicates the number of times that the system is restored from underrun of the jitter buffer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.27.1.4
hwPwCmdTdmDefectStatsR1 Indicates the number of times that the PSN side receives an alarm triggered by R = 1. When the peer end didn't receive for failure. For example, jitter buffer underrun, Then the local end receives an packet with R = 1.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.27.1.5
hwPwCmdTdmDefectStatsR1Clear Indicates the number of times that the system is restored from R1.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.27.1.6
hwPwCmdTdmDefectStatsLM010 Indicates the number of times that the PSN side receives an alarm triggered by M = 1. Only for the CESOPSN, When the local end receives a RDI alarm from the AC side, the local end sets the control flag M to 1. Then, …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.27.1.7
hwPwCmdTdmDefectStatsLM010Clear Indicates the number of times that the system is restored from LM(010) to LM(000).	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.27.1.8
hwPwCmdTdmDefectStatsLM100 Indicates the number of times that the PSN side receives an alarm triggered by L = 1. When the local end receives a LOS, LOF, AIS, or LMFA alarm from the AC side, the local end sets the control flag L to 1. Then, th…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.27.1.9
hwPwCmdTdmDefectStatsLM100Clear Indicates the number of times that the system is restored from LM(100) to LM(000).	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.27.1.10

MPLS priority mapping profile table for PW.
The purpose of this table is to set and query MPLS priority mapping profile.
The index of this table is hwPwPriMappingProfileName.

hwPwPriMappingEntry row .1.3.6.1.4.1.2011.5.12.8.1.2.28.1

MPLS priority mapping profile table for PW.
The purpose of this table is to set and query MPLS priority mapping profile.
The index of this entry is hwPwPriMappingProfileName.

Indexes

hwPwPriMappingProfileName

Column	Syntax	OID
hwPwPriMappingProfileName QoS priority mapping profile name for PW, a string of 1-32 characters. There are all together 92 valid characters for the name. These characters include the following: uppercase and lowercase English letters (52 char…	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.2011.5.12.8.1.2.28.1.1
hwPwInboundInputPriList Inbound input priority list(MPLS PW label EXP) of QoS priority mapping. Legal character include: 0-7,hyphen,comma. Example legal string: 0,2,4-7.	OctetStringr/w Constraints: range: 1-15	.1.3.6.1.4.1.2011.5.12.8.1.2.28.1.2
hwPwInboundOutputPriList Inbound output priority list(ethernet VLAN tag 802.1p) of QoS priority mapping. Legal character include: 0-7,hyphen,comma. Example legal string: 0,2,4-7.	OctetStringr/w Constraints: range: 1-15	.1.3.6.1.4.1.2011.5.12.8.1.2.28.1.3
hwPwOutboundInputPriList Outbound input priority list(ethernet VLAN tag 802.1p) of QoS priority mapping. Legal character include: 0-7,hyphen,comma. Example legal string: 0,2,4-7.	OctetStringr/w Constraints: range: 1-15	.1.3.6.1.4.1.2011.5.12.8.1.2.28.1.4
hwPwOutboundOutputPriList Outbound output priority list(MPLS PW label EXP) of QoS priority mapping. Legal character include: 0-7,hyphen,comma. Example legal string: 0,2,4-7.	OctetStringr/w Constraints: range: 1-15	.1.3.6.1.4.1.2011.5.12.8.1.2.28.1.5
hwPwPriMappingProfileRowStatus For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state. Options: 1. active(1) -indicates query operation 2. createAn…	Integer32r/w Constraints: range: 1-6	.1.3.6.1.4.1.2011.5.12.8.1.2.28.1.6

This table is used to query or clear the 
traffic statistic info of PW.
The index of this table is pwIndex.

hwPwCmdStatisticEntry row .1.3.6.1.4.1.2011.5.12.8.1.2.29.1

This table is used to query or clear the
traffic statistic info of PW.
The index of this entry is pwIndex.

Indexes

PW-STD-MIBpwIndex

Column	Syntax	OID
hwPwCmdStatisticUpstreamOctectsP0 The total number of upstream octets with priority equel to 0.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.1
hwPwCmdStatisticUpstreamPacketsP0 The total number of upstream packets with priority equel to 0.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.2
hwPwCmdStatisticUpstreamOctectsP1 The total number of upstream octets with priority equel to 1.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.3
hwPwCmdStatisticUpstreamPacketsP1 The total number of upstream packets with priority equel to 1.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.4
hwPwCmdStatisticUpstreamOctectsP2 The total number of upstream octets with priority equel to 2.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.5
hwPwCmdStatisticUpstreamPacketsP2 The total number of upstream packets with priority equel to 2.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.6
hwPwCmdStatisticUpstreamOctectsP3 The total number of upstream octets with priority equel to 3.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.7
hwPwCmdStatisticUpstreamPacketsP3 The total number of upstream packets with priority equel to 3.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.8
hwPwCmdStatisticUpstreamOctectsP4 The total number of upstream octets with priority equel to 4.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.9
hwPwCmdStatisticUpstreamPacketsP4 The total number of upstream packets with priority equel to 4.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.10
hwPwCmdStatisticUpstreamOctectsP5 The total number of upstream octets with priority equel to 5.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.11
hwPwCmdStatisticUpstreamPacketsP5 The total number of upstream packets with priority equel to 5.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.12
hwPwCmdStatisticUpstreamOctectsP6 The total number of upstream octets with priority equel to 6.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.13
hwPwCmdStatisticUpstreamPacketsP6 The total number of upstream packets with priority equel to 6.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.14
hwPwCmdStatisticUpstreamOctectsP7 The total number of upstream octets with priority equel to 7.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.15
hwPwCmdStatisticUpstreamPacketsP7 The total number of upstream packets with priority equel to 7.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.16
hwPwCmdStatisticDownstreamOctectsP0 The total number of downstream octets with priority equel to 0.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.17
hwPwCmdStatisticDownstreamPacketsP0 The total number of downstream packets with priority equel to 0.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.18
hwPwCmdStatisticDownstreamOctectsP1 The total number of downstream octets with priority equel to 1.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.19
hwPwCmdStatisticDownstreamPacketsP1 The total number of downstream packets with priority equel to 1.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.20
hwPwCmdStatisticDownstreamOctectsP2 The total number of downstream octets with priority equel to 2.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.21
hwPwCmdStatisticDownstreamPacketsP2 The total number of downstream packets with priority equel to 2.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.22
hwPwCmdStatisticDownstreamOctectsP3 The total number of downstream octets with priority equel to 3.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.23
hwPwCmdStatisticDownstreamPacketsP3 The total number of downstream packets with priority equel to 3.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.24
hwPwCmdStatisticDownstreamOctectsP4 The total number of downstream octets with priority equel to 4.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.25
hwPwCmdStatisticDownstreamPacketsP4 The total number of downstream packets with priority equel to 4.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.26
hwPwCmdStatisticDownstreamOctectsP5 The total number of downstream octets with priority equel to 5.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.27
hwPwCmdStatisticDownstreamPacketsP5 The total number of downstream packets with priority equel to 5.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.28
hwPwCmdStatisticDownstreamOctectsP6 The total number of downstream octets with priority equel to 6.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.29
hwPwCmdStatisticDownstreamPacketsP6 The total number of downstream packets with priority equel to 6.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.30
hwPwCmdStatisticDownstreamOctectsP7 The total number of downstream octets with priority equel to 7.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.31
hwPwCmdStatisticDownstreamPacketsP7 The total number of downstream packets with priority equel to 7.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.32
hwPwCmdStatisticClear Clear the traffic statistics of this pw. Options: 1. clear(1) -clear the traffic statistics of this pw	Enumerationr/w Enumerated Values: 1 clear	.1.3.6.1.4.1.2011.5.12.8.1.2.29.1.33

This table specifies information for pw redundancy.
The index of this table is pwIndex.

hwPwRedundancyEntry row .1.3.6.1.4.1.2011.5.12.8.1.2.31.1

This table specifies information for pw redundancy.
The index of this entry is pwIndex.

Indexes

PW-STD-MIBpwIndex

Column	Syntax	OID
hwPwRedundancyMode Indicates the mode of the pw redundancy. Options: 1. master(1) -indicates that the pw redundancy mode is master 2. independent(2) -indicates that the pw redundancy mode is independent Default: master(1)	Enumerationr/w Enumerated Values: 1 master 2 independent	.1.3.6.1.4.1.2011.5.12.8.1.2.31.1.1
hwPwStreamDualReceiving Indicates the stream receiving mode of the pw redundancy. Options: 1. enable(1) -indicates that the stream receiving mode of the pw redundancy is dual 2. disable(2) -indicates that the stream receiving mode of the pw…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.12.8.1.2.31.1.2

This table specifies information for PW CAR.
The index of this table is pwIndex.

hwPwCmdPwCarExtEntry row .1.3.6.1.4.1.2011.5.12.8.1.2.32.1

This table specifies information for PW CAR.
The index of this entry is pwIndex.

Indexes

PW-STD-MIBpwIndex

Column	Syntax	OID
hwPwCmdPwCarExtCir Committed information rate, it is the necessary parameter for adding pw car. Range: 1-1048575 Unit: 64Kbit/s	Unsigned32r/w Constraints: range: 1-1048575	.1.3.6.1.4.1.2011.5.12.8.1.2.32.1.1
hwPwCmdPwCarExtCbs Committed burst size, default value is ((cir+8191)/8192+1). Range: 1-32767 Unit: 2KByte/s	Unsigned32r/w Constraints: range: 1-32767	.1.3.6.1.4.1.2011.5.12.8.1.2.32.1.2
hwPwCmdPwCarExtPir Peak information rate, default value is double of committed information rate. Range: 1-1048575 Unit: 64Kbit/s	Unsigned32r/w Constraints: range: 1-1048575	.1.3.6.1.4.1.2011.5.12.8.1.2.32.1.3
hwPwCmdPwCarExtPbs Peak burst size, default value is MAX(((pir+8191)/8192 + 1), cbs). Range: 1-32767 Unit: 2KByte/s	Unsigned32r/w Constraints: range: 1-32767	.1.3.6.1.4.1.2011.5.12.8.1.2.32.1.4
hwPwCmdPwCarExtRowStatus For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state. Options: 1. active(1) -indicates query operation 2. createAn…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.12.8.1.2.32.1.5