HUAWEI-PROTECTION-MIB Table View

Port protection table.This table is use to record the indices, workMode and other
infomation of the two ports which is in protection group. ifIndex is the index of
the working interface. For non-ETH board-level protection group, the port number
is 0; for the ETH board-level protection group, the port number is 127.
The index of this table is ifIndex.

hwProtectionEntry row .1.3.6.1.4.1.2011.6.50.1.1

Port protection table.This table is use to record the indices, workMode and other
infomation of the two ports which is in protection group. ifIndex is the index of
the working interface. For non-ETH board-level protecti…

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwPgType Port protection type. Options: 1.e1(1) - indicates that the port protection type is e1 2.atmapm(2) - indicates that the port protection type is atmapm 3.atmaiu(3) - indicates that the port pr…	Enumerationr/w Enumerated Values: 1 e1 2 atmapm 3 atmaiu 4 atmaic 5 atmmmxboard 6 atmmmxport 7 eth	.1.3.6.1.4.1.2011.6.50.1.1.1
hwPgCurrentWorkEntity Whether the current board or port is the working or the protecting one. Options: 1. work(1) - indicates that the port is working 2. protect(2) - indicates that the port is protecting	Enumeration Enumerated Values: 1 work 2 protect	.1.3.6.1.4.1.2011.6.50.1.1.2
hwPgProtectIfIndex Index of the protecting board (the specified port number is 0).	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.50.1.1.3
hwPgMngtEnable Enables or disables the protection function. Options: 1. enable(1) - indicates that the port protection function is enabled 2. disable(2) - indicates that the port protection function is disabled	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.50.1.1.4
hwPgMngtAdminStatus Protection operation. Options: 1. switch(1) - Forced switchover	Enumerationr/w Enumerated Values: 1 switch	.1.3.6.1.4.1.2011.6.50.1.1.5
hwPgWorkMode Working mode of the protection group. Options: 1.uniformRoute(1) - working mode of the protection group is uniform route 2.diverseRoute(2) - working mode of the protection group is diverse route 3.portState(3) - wo…	Enumerationr/w Enumerated Values: 1 uniformRoute 2 diverseRoute 3 portState 4 timedelay 5 lacp 6 timebis	.1.3.6.1.4.1.2011.6.50.1.1.6
hwPgRowStatus Protection operation (4: Add; 6: Delete). Options: 1. Add(4) - add protection group 2. Delete(6) - delete protection group	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.50.1.1.7
hwPgWeight Protection group weight.	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.2011.6.50.1.1.8
hwPgStandbyOnTime Open time of standby port when checking port status of the standby board. Unit: ms The time equals to the returnd value multiply by 10.	msInteger32r/w Constraints: range: 40-1000	.1.3.6.1.4.1.2011.6.50.1.1.9
hwPgHoldTime The delay-time of checking protection group. Unit: ms The time equals to the returnd value multiply by 10.	msInteger32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.2011.6.50.1.1.10
hwPgPriority Group-protect Priority. Options: 1.low(1) - indicates that the priority of the protection group is low 2.middle(2) - indicates that the priority of the protection group is middle 3.high(3) - indica…	Enumerationr/w Enumerated Values: 1 low 2 middle 3 high	.1.3.6.1.4.1.2011.6.50.1.1.11

This table is no longer used.
The indexes of this table are hwFrameIndex and hwSlotIndex.

hwProtectionAbilityEntry row .1.3.6.1.4.1.2011.6.50.2.1

This table is no longer used.
The indexes of this entry are hwFrameIndex and hwSlotIndex.

Indexes

HUAWEI-DEVICE-MIBhwFrameIndex HUAWEI-DEVICE-MIBhwSlotIndex

Column	Syntax	OID
hwPgAbilityType Protection type.This object is no longer used. Options: 1.e1(1) - indicates that the protection type is e1 2.atmapm(2) - indicates that the protection type is atmapm 3.atmaiu(3) - indicates t…	Enumeration Enumerated Values: 1 e1 2 atmapm 3 atmaiu 4 atmaic 5 atmmmxboard 6 atmmmxport 7 eth	.1.3.6.1.4.1.2011.6.50.2.1.1
hwPgOtherFrame ID of the shelf where protection group 2 is located. This object is no longer used.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.50.2.1.2
hwPgOtherSlot ID of the slot where protection group 2 is located. This object is no longer used.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.50.2.1.3

Gau port config protective group.The index of this table is hwGauFirstPortIfIndex.

hwGauPortProtectEntry row .1.3.6.1.4.1.2011.6.50.3.1

Gau port config protective group.The index of this entry is hwGauFirstPortIfIndex.

Indexes

hwGauFirstPortIfIndex

Column	Syntax	OID
hwGauFirstPortIfIndex Gau first port ifindex.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.50.3.1.1
hwGauSecondPortIfIndex Gau Second port ifindex.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.50.3.1.2
hwGauPortrotectRowStatus Config protective group rowstauts.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.50.3.1.3
hwGauPortCurrentActiveIfIndex Current active port ifindex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.50.3.1.4

Group table.
The objects in hwPsGroupTable are used for performing operations associated with the protection group. 
The operations include creating and deleting a protection group, setting the protection group switchover 
function, setting the switchover recovery waiting time, setting the description information about a protection group, 
freezing and unfreezing a protection group, enabling and disabling a protection group, and querying the settings 
of a protection group.
The index of this table is hwPgGroupId.

hwPsGroupEntry row .1.3.6.1.4.1.2011.6.50.5.1

Group table.
The objects in hwPsGroupTable are used for performing operations associated with the protection group.
The operations include creating and deleting a protection group, setting the protection group switchov…

Indexes

hwPgGroupId

Column	Syntax	OID
hwPgGroupId Protection group ID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.50.5.1.1
hwPgGroupWorkMode Group workmode. Options: 1. timedelay(1) -ETH delay mode. 2. portstate(2) -ETH state mode. 3. smartlink(3) -SMART LINK active/standby mode. 4. unidirection(4) -STM-1 single-direction protection mod…	Enumerationr/w Enumerated Values: 1 timedelay 2 portstate 3 smartlink 4 unidirection 5 bidirection 6 smartlinkbalance 7 boardstate 8 dualparenting	.1.3.6.1.4.1.2011.6.50.5.1.2
hwPgGroupReversionTime Group reversion time. Range: 1-1440 Default: 720 Unit: second	secondInteger32r/w Constraints: range: 1-1440	.1.3.6.1.4.1.2011.6.50.5.1.3
hwPgGroupReversion Group reversion operation. Options: 1. enable(1) -indicates that the protection group switchover recovery function is enabled 2. disable(2) -indicates that the protection group switchover recovery function is disabled	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.50.5.1.4
hwPgGroupFreeze Group freeze operation. Options: 1. freeze(1) -Frozen state 2. undofreeze(2) -Unfrozen state	Enumerationr/w Enumerated Values: 1 freeze 2 undofreeze	.1.3.6.1.4.1.2011.6.50.5.1.5
hwPgGroupAdmin Group admin operation. Options: 1. enable(1) -The protection group is enabled 2. disable(2) -The protection group is disabled	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.50.5.1.6
hwPgGroupDesc Group description. All characters must between 0x20 and 0x7E, and can not be question mark. Double quotation mark can not be the first or last character. Blank can not follow double quotation mark.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2011.6.50.5.1.7
hwPgGroupProtectTarget Group protect target. Options: 1. asmainboard(1) -Active main board and standby main board. 2. asmainboardport(2) -Port of active main board and standby main board. 3. asmainboardlag(3) -LAG of active main board an…	Enumerationr/w Enumerated Values: 1 asmainboard 2 asmainboardport 3 asmainboardlag 4 ethnniport 5 ethnnilagmember 6 eponuniport 7 gponuniport 8 stmnniport 9 serviceprocessboard 10 eponuniont 11 gponuniont 12 twdmchannelgroup	.1.3.6.1.4.1.2011.6.50.5.1.9
hwPgGroupRowStatus Group rowstatus. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.50.5.1.10

Member table.
The objects in hwPsMemberTable are used for performing operations associated with 
the protection group member. The operations include adding and deleting a member, 
forced or manual switchover, locking a member, and querying the information about 
a member. This table is used to manage only the protection group member which is a port 
or a board. To manage the protection group member which is an ONT, use hwPsOntMemberTable.                
The indexes of this table are IfIndex and hwPgGroupId.
When IfIndex = -1, walk all member of hwPgGroupId.
Only ifIndex can be used to determine specific members.

hwPsMemberEntry row .1.3.6.1.4.1.2011.6.50.6.1

Member table.
The objects in hwPsMemberTable are used for performing operations associated with
the protection group member. The operations include adding and deleting a member,
forced or manual switchover, locking a …

Indexes

IF-MIBifIndex hwPgGroupId

Column	Syntax	OID
hwPgMemberRole Member role. Options: 1. work(1) -Working member 2. protect(2) -Protection member	Enumerationr/w Enumerated Values: 1 work 2 protect	.1.3.6.1.4.1.2011.6.50.6.1.1
hwPgMemberOper Member operation. Options: 1. manualswitch(1) -manual-switch The manual switchover can be performed only when the protection group is enabled, no member is locked, no fo…	Enumerationr/w Enumerated Values: 1 manualswitch 2 undomanualswitch 3 forceswitch 4 undoforceswitch 5 lockout 6 unlockout 7 exerciseswitch 8 undoexerciseswitch	.1.3.6.1.4.1.2011.6.50.6.1.2
hwPgMemberStatus Member status. Options: 1. null(1) -Null operation 2. manualswitchsrc(2) -Source member of the manual switchover 3. manualswitchdst(3) -Target member of the manual switchover 4. forceswitchsrc(…	Enumeration Enumerated Values: 1 null 2 manualswitchsrc 3 manualswitchdst 4 forceswitchsrc 5 forceswitchdst 6 autoswitchsrc 7 autoswitchdst 8 lockout 9 exerciseswitch	.1.3.6.1.4.1.2011.6.50.6.1.3
hwPgDstMember Target member ifindex.Reading this object will result in implementation-specific results.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.50.6.1.4
hwPgMemberRunningState Member status. Options: 1. active(1) -State of the member that carries the service 2. standby(2) -State of the member that does not carry the service 3. adding(3) -Adding 4. deleting(4) -Deleting 5. switching(5)-Sw…	Enumeration Enumerated Values: 1 active 2 standby 3 adding 4 deleting 5 switching	.1.3.6.1.4.1.2011.6.50.6.1.5
hwPgMemberPeerMember Peer member ifindex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.50.6.1.6
hwPgMemberRowStatus Member rowstatus. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.50.6.1.8

Protect extended Group table.The index of this table is hwPgGroupId.
This table is used to config private parameter of protection group.

hwPsGroupExtEntry row .1.3.6.1.4.1.2011.6.50.7.1

Protect extended Group table.The index of this entry is hwPgGroupId.
This table is used to config private parameter of protection group.

Indexes

hwPgGroupId

Column	Syntax	OID
hwPsGroupFlushSendCtrlVlan Control VLAN ID of flush packet which to send. -1 means set VLAN ID to useless value.	Integer32r/w Constraints: range: 1-4093 range: -1--1	.1.3.6.1.4.1.2011.6.50.7.1.1
hwPsGroupFlushSendPassword Password of flush packet which to send. Blank string means set password to useless value. All characters must between 0x20 and 0x7E, and can not be question mark. Double quotation mark can not be the first or last chara…	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.2011.6.50.7.1.2
hwPsGroupLoadBalanceState Load balance state of smart link protect group. Options: 1. allonwork(1) - Load balance state of smart link protect group is allonwork 2. allonprotect(2) - Load balance state of smart link protect group is allonprote…	Enumeration Enumerated Values: -1 invalid 1 allonwork 2 allonprotect 3 loadbalance	.1.3.6.1.4.1.2011.6.50.7.1.3
hwPsGroupPppoeSingleMac group pppoe single-mac operation. Options: 1.bind(1) - The operation is bound 2.unbind(2) - The operation is unbound 3.invalid(-1) - The operation is invalid	Enumerationr/w Enumerated Values: -1 invalid 1 bind 2 unbind	.1.3.6.1.4.1.2011.6.50.7.1.4
hwPsGroupAntiJitterTime Set anti-jitter time gpon or epon protect-group. The allowable value is from 1 to 1440 seconds. The invalid value is -1. Defaut value is 720 seconds.	Integer32r/w Constraints: range: 1-1440 range: -1--1	.1.3.6.1.4.1.2011.6.50.7.1.5
hwPgGroupAssociatedUpLinkBfd This indicates the name of the BFD session which will be bound/unbound.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.2011.6.50.7.1.6
hwPgGroupAssociatedUpLinkPort ETH port member ifindex which will be bound/unbound.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.50.7.1.7
hwPgGroupAssociatedUpLinkStatus group uplink monitor status. Options: 1.binddown(1) - uplink status is down 2.bindup(2) - uplink status is up 3.unbind(3) - unbound uplink monitor 4.invalid(-1) - The operation is invalid	Enumeration Enumerated Values: -1 invalid 1 binddown 2 bindup 3 unbind	.1.3.6.1.4.1.2011.6.50.7.1.8
hwPsGroupStandardTypeB This object indicates whether the GPON uni port protect-group is standard Type B. Options: 1. yes(1) - Standard Type B 2. no(2) - Nonstandard Type B 3. invalid(-1) - Indicates that no inform…	Enumerationr/w Enumerated Values: -1 invalid 1 yes 2 no	.1.3.6.1.4.1.2011.6.50.7.1.9
hwPgGroupAssociatedUpLinkMdIndex This object indicates the MD index which will be bound/unbound. hwPgGroupAssociatedUpLinkMdIndex, hwPgGroupAssociatedUpLinkMaIndex and hwPgGroupAssociatedUpLinkMepIndex must be issued together.	Integer32r/w Constraints: range: -1-7	.1.3.6.1.4.1.2011.6.50.7.1.10
hwPgGroupAssociatedUpLinkMaIndex This object indicates the MA index which will be bound/unbound. hwPgGroupAssociatedUpLinkMdIndex, hwPgGroupAssociatedUpLinkMaIndex and hwPgGroupAssociatedUpLinkMepIndex must be issued together.	Integer32r/w Constraints: range: -1-4095	.1.3.6.1.4.1.2011.6.50.7.1.11
hwPgGroupAssociatedUpLinkMepIndex This object indicates the MEP index which will be bound/unbound. hwPgGroupAssociatedUpLinkMdIndex, hwPgGroupAssociatedUpLinkMaIndex and hwPgGroupAssociatedUpLinkMepIndex must be issued together.	Integer32r/w Constraints: range: 1-8191 range: -1--1	.1.3.6.1.4.1.2011.6.50.7.1.12
hwPsGroupDpPeerNodeName This object indicates the peer node name of Type B dual parenting protect group. The empty string indicates that the peer node name is deleted.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.2011.6.50.7.1.13
hwPsGroupDpPeerFrameSlotPort This object indicates the peer node frameid, slotid and portid of Type B dual parenting protect group. Format: frameid(2bytes) + slotid(1bytes) + portid(1bytes) An invalid value 0xFFFFFFFF indicates that the peer node f…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.50.7.1.14
hwPsGroupDpHandshakeStatus This object indicates the handshake status between the local member and peer member of dual parenting protect group. Options: 1. normal(1) - Indicates that the handshake status is normal 2. failed(2) - Indicat…	Enumeration Enumerated Values: -1 invalid 1 normal 2 failed	.1.3.6.1.4.1.2011.6.50.7.1.15
hwPsGroupStandbyDetectSwitch Function of detecting the forced mode of the standby port in the timedelay protection group for active and standby control boards. Options: 1. enable(1) - Indicates that the detecting function is enable. 2. disable(2)…	Enumerationr/w Enumerated Values: -1 invalid 1 enable 2 disable	.1.3.6.1.4.1.2011.6.50.7.1.16
hwPsGroupPortStateTimerOffTime This object indicates the closing time of portstate protect group active port, when the active port is offline. The allowable value is from 1 to 1200 seconds. The invalid value is -1. Default: 5 Unit: second	Integer32r/w Constraints: range: 1-1200 range: -1--1	.1.3.6.1.4.1.2011.6.50.7.1.17
hwPsGroupPortStateTimerOnTime This object indicates the opening time of portstate protect group active port, after closing time for the active port offline. The allowable value is from 1 to 1200 seconds. The invalid value is -1. Default: 90 Unit: s…	Integer32r/w Constraints: range: 1-1200 range: -1--1	.1.3.6.1.4.1.2011.6.50.7.1.18
hwPsGroupStandbyPortSuppressFlappingSwitch Function of flapping suppression of the standby port in the timedelay protection group. Options: 1. disable(0) - Indicates that the flapping suppression function is disable. 2. enable(1) - Indicates that the flappi…	Enumerationr/w Enumerated Values: -1 invalid 0 disable 1 enable	.1.3.6.1.4.1.2011.6.50.7.1.19
hwPsGroupStandbyPortRssiMonitoringPolicySwitch Function of RSSI detect of the standby port in the protection group. Options: 1. disable(0) - Indicates that the RSSI detect function is disable. 2. enable(1) - Indicates that the RSSI detect function is enable. 3.…	Enumerationr/w Enumerated Values: -1 invalid 0 disable 1 enable	.1.3.6.1.4.1.2011.6.50.7.1.20
hwPsGroupStandbyPortRssiMonitoringInterval This object indicates the interval of standby port RSSI detect, the default value is 8. A special value of -1 indicates the RSSI detect function of this protection group is disabled during the query operation.	15 minuteInteger32r/w Constraints: range: 4-96 range: -1--1	.1.3.6.1.4.1.2011.6.50.7.1.21
hwPsGroupStandbyPortRssiMonitoringLowRssiAlarmThreshold This object indicates the threshold of standby port RSSI min value. It ranges from -9900 to 10000 units of 0.01 dBm, the default value is -2800. A special value of 0x7FFFFFFE (2147483646) indicates the RSSI detect funct…	0.01 dBmInteger32r/w Constraints: range: 2147483647-2147483647 range: -9900-10000	.1.3.6.1.4.1.2011.6.50.7.1.22

Protect group load balance configuration table.
The indexes of this table are hwPgGroupId and hwPsGroupLoadBalanceInstance.

hwPsGroupLoadBalanceEntry row .1.3.6.1.4.1.2011.6.50.8.1

Protect group load balance configuration table.
The indexes of this entry are hwPgGroupId and hwPsGroupLoadBalanceInstance.

Indexes

hwPgGroupId hwPsGroupLoadBalanceInstance

Column	Syntax	OID
hwPsGroupLoadBalanceInstance Instance ID. From 0 to the max instance ID. The max intance ID is different for products.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.50.8.1.1
hwPsGroupLoadBalanceRole Load balance configuration of instance in each protect group. Default value is on-work. Options: 1. onwork(1) -forward through work member on load-balance state 2. onprotect(2) -forward through protect member on load…	Enumerationr/w Enumerated Values: 1 onwork 2 onprotect	.1.3.6.1.4.1.2011.6.50.8.1.2

Describes the configuration information for receiving the flush packet.
The index of this table is ifIndex.

hwSmartLinkFlushRecvPortEntry row .1.3.6.1.4.1.2011.6.50.9.1

Describes the configuration information for receiving the flush packet.
The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwSmartLinkFlushRecvCtrlVlan Indicates the control VLAN of the received flush packet. Range: -1, 1-4093 -1 indicates deleting the control VLAN.	Integer32r/w Constraints: range: 1-4093 range: -1--1	.1.3.6.1.4.1.2011.6.50.9.1.1
hwSmartLinkFlushRecvPassword Indicates the authentication password of the received flush packet. When the value of this leaf is a null character string, it indicates that no password authentication is required. All characters in the password must …	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.2011.6.50.9.1.2

Used for configuring a monitor link group.
The index of this table is hwMonitorLinkGroupId.

hwMonitorLinkGroupEntry row .1.3.6.1.4.1.2011.6.50.11.1

Used for configuring a monitor link group.
The index of this entry is hwMonitorLinkGroupId.

Indexes

hwMonitorLinkGroupId

Column	Syntax	OID
hwMonitorLinkGroupId Indicates the index of the monitored group. When the value of hwMonitorLinkGroupId is -1 or 65535, it indicates that an available monitoring group ID is automatically allocated.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.50.11.1.1
hwMonitorLinkGroupRecoverTime Indicates the recovery time of the monitored group. Range: 3-60 Default: 3 Unit: second	Integer32r/w Constraints: range: 3-60	.1.3.6.1.4.1.2011.6.50.11.1.2
hwMonitorLinkGroupState Indicates the status of the monitored group. Options: 1. idle(1) -the status of a monitored group is idle 2. normal(2) -the status of a monitored group is normal 3. failed(3) -the status of a monitored gro…	Enumeration Enumerated Values: 1 idle 2 normal 3 failed 4 recovering	.1.3.6.1.4.1.2011.6.50.11.1.3
hwMonitorLinkGroupRowStatus Indicates the row status, used for creating or deleting a monitored group. createAndGo(4) and destroy(6) are supported. During the query operation, active(1) is always returned for this leaf. Options: 1. active(1) …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.50.11.1.10

Used for configuring a monitor up link port.
The index of this table is hwMonitorLinkUpLinkIfIndex.

hwMonitorLinkUpLinkEntry row .1.3.6.1.4.1.2011.6.50.12.1

Used for configuring a monitor up link port.
The index of this entry is hwMonitorLinkUpLinkIfIndex.

Indexes

hwMonitorLinkGroupId

Column	Syntax	OID
hwMonitorLinkUpLinkIfIndex Indicates the index of the upstream port of the monitored group. Its calculation is the same as that of ifIndex. When the value of this leaf is -1, it indicates that no upstream port exists.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.50.12.1.1
hwMonitorLinkUpLinkStatus Indicates the status of the upstream port of the monitored group. Options: 1. linkUp(1) -the status of the upstream port of the monitored group is link up 2. linkDown(2) -the status of the upstream port of the monitor…	Enumeration Enumerated Values: -1 invalid 1 linkUp 2 linkDown	.1.3.6.1.4.1.2011.6.50.12.1.2
hwMonitorLinkUpLinkUpTime Indicates the last time when the upstream port of the monitored groups is up. The value format of this leaf is an 8-byte hexadecimal number. Among the eight bytes, the first and second bytes indicates the year, the thi…	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2011.6.50.12.1.3
hwMonitorLinkUpLinkDownTime Indicates the last time when the upstream port of the monitored groups is down. The value format of this leaf is an 8-byte hexadecimal number. Among the eight bytes, the first and second bytes indicates the year, the t…	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2011.6.50.12.1.4

Used for configuring a monitor down link port.
The indexes of this table are hwMonitorLinkGroupId and hwMonitorLinkDownLinkIfIndex.

hwMonitorLinkDownLinkEntry row .1.3.6.1.4.1.2011.6.50.13.1

Used for configuring a monitor down link port.
The indexes of this entry are hwMonitorLinkGroupId and hwMonitorLinkDownLinkIfIndex.

Indexes

hwMonitorLinkGroupId hwMonitorLinkDownLinkId

Column	Syntax	OID
hwMonitorLinkDownLinkId Indicates the index of the downlink of the monitored group. Range: 0-511. When the value of hwMonitorLinkDownLinkId is -1 or 65535, it indicates that an available downlink ID is automatically allocated.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.50.13.1.1
hwMonitorLinkDownLinkIfIndex Indicates the index of the downstream port of the monitored group.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.50.13.1.2
hwMonitorLinkDownLinkStatus Indicates the status of the downstream port of the monitored group. Options: 1. linkUp(1) -the status of the downstream port of the monitored group is link up 2. linkDown(2) -the status of the downstream port of the m…	Enumeration Enumerated Values: 1 linkUp 2 linkDown	.1.3.6.1.4.1.2011.6.50.13.1.3
hwMonitorLinkDownLinkUpTime Indicates the last time when the downstream port of the monitored groups is up. The value format of this leaf is an 8-byte hexadecimal number. Among the eight bytes, the first and second bytes indicates the year, the t…	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2011.6.50.13.1.4
hwMonitorLinkDownLinkDownTime Indicates the last time when the downstream port of the monitored groups is down. The value format of this leaf is an 8-byte hexadecimal number. Among the eight bytes, the first and second bytes indicates the year, the…	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2011.6.50.13.1.5
hwMonitorLinkDownLinkOntId Indicates the Ont ID of the downstream port of the monitored group. This node is not specified or is set to -1 if a no-xPON ONT Ethernet port is used for indicating a downlink.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.50.13.1.6
hwMonitorLinkDownLinkOntPortId Indicates the Ont port ID of the downstream port of the monitored group. This node is not specified or is set to -1 if a no-xPON ONT Ethernet port is used for indicating a downlink.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.50.13.1.7
hwMonitorLinkDownRowStatus Indicates the row status, used for creating or deleting a monitored downlink. createAndGo(4) and destroy(6) are supported. During the query operation, active(1) is always returned for this leaf. Options: 1. active(1) …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.50.13.1.10

Member table for ONT.
The objects in hwPsOntMemberTable are used for performing operations associated with 
the ONT protection group member. The operations include adding and deleting a member, 
forced or manual switchover, locking a member, and querying the information about 
a member. This table determines a protection group member by the ifIndex and hwPgOntId 
of the member. The indexes of this table are IfIndex, hwOntId and hwPgGroupId.
When IfIndex = -1, hwOntId = -1, walk all member of hwPgGroupId.

hwPsOntMemberEntry row .1.3.6.1.4.1.2011.6.50.14.1

Member table for ONT.
The objects in hwPsOntMemberTable are used for performing operations associated with
the ONT protection group member. The operations include adding and deleting a member,
forced or manual switcho…

Indexes

IF-MIBifIndex hwPgOntId hwPgGroupId

Column	Syntax	OID
hwPgOntId Ont ID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.50.14.1.1
hwPgOntMemberRole Member role. Options: 1. work(1) -Working member 2. protect(2) -Protection member	Enumerationr/w Enumerated Values: 1 work 2 protect	.1.3.6.1.4.1.2011.6.50.14.1.2
hwPgOntMemberOper Member operation: Options: 1. manualswitch(1) -manual-switch The manual switchover can be performed only when the protection group is enabled, no member is locked, no f…	Enumerationr/w Enumerated Values: 1 manualswitch 2 undomanualswitch 3 forceswitch 4 undoforceswitch 5 lockout 6 unlockout 7 exerciseswitch 8 undoexerciseswitch	.1.3.6.1.4.1.2011.6.50.14.1.3
hwPgOntMemberStatus Member status. Options: 1. null(1) -Null operation 2. manualswitchsrc(2) -Source member of the manual switchover 3. manualswitchdst(3) -Target member of the manual switchover 4. forceswitchsrc(4)…	Enumeration Enumerated Values: 1 null 2 manualswitchsrc 3 manualswitchdst 4 forceswitchsrc 5 forceswitchdst 6 autoswitchsrc 7 autoswitchdst 8 lockout 9 exerciseswitch	.1.3.6.1.4.1.2011.6.50.14.1.4
hwPgOntDstMemberPort Target member ifindex. Reading this object will result in implementation-specific results.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.50.14.1.5
hwPgOntDstMemberOnt Target member ontId. Reading this object will result in implementation-specific results.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.50.14.1.6
hwPgOntMemberRunningState Member status. Options: 1. active(1) -State of the member that carries the service 2. standby(2) -State of the member that does not carry the service 3. adding(3) -Adding 4. deleting(4) -Deleting 5. switching(5)-Sw…	Enumeration Enumerated Values: 1 active 2 standby 3 adding 4 deleting 5 switching	.1.3.6.1.4.1.2011.6.50.14.1.7
hwPgOntMemberPeerMemberPort Peer member ifindex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.50.14.1.8
hwPgOntMemberPeerMemberOnt Peer member ontId.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.50.14.1.9
hwPgOntMemberRowStatus Member rowstatus. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.50.14.1.11

This table is used to configure the information about the dual parenting peer node.
The index of this table is hwPsDpPeerNodeNameIndex.

hwPsDpPeerNodeEntry row .1.3.6.1.4.1.2011.6.50.19.1

This table is used to configure the information about the dual parenting peer node.
The index of this entry is hwPsDpPeerNodeNameIndex.

Indexes

hwPsDpPeerNodeNameIndex

Column	Syntax	OID
hwPsDpPeerNodeNameIndex This object indicates the dual parenting peer node name.	OctetString Constraints: range: 1-15	.1.3.6.1.4.1.2011.6.50.19.1.1
hwPsDpPeerNodeIpAddress This object indicates the IP address of dual parenting peer node. The IP address can not be multicast IP 224.0.0.0-239.255.255.255 or broadcast IP 255.255.255.255.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.50.19.1.2
hwPsDpPeerNodeTcpPort This object indicates the TCP port ID of dual parenting peer node. Range: 1024-49151	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.50.19.1.3
hwPsDpPeerNodeCommunicationKey This object indicates the communication key of dual parenting peer node.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.2011.6.50.19.1.4
hwPsDpPeerNodeConnectStatus This object indicates the connect status between the dual parenting local node and peer node. Options: 1. normal(1) - Indicates that the connect status is normal 2. failed(2) - Indicates that the connect statu…	Enumeration Enumerated Values: -1 invalid 1 normal 2 failed	.1.3.6.1.4.1.2011.6.50.19.1.5
hwPsDpPeerNodeRowStatus The hwPsDpPeerNodeRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instance…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.50.19.1.6