HUAWEI-POS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
36

posAppTable

table
.1.3.6.1.4.1.2011.2.33.8.1 · 1 row entry · 15 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk posAppTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-POS-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-POS-MIB::posAppTable' 
The table to get and set the application informatin.
posAppEntry row .1.3.6.1.4.1.2011.2.33.8.1.1
The content of posAppTable.
Indexes
Column Syntax OID
posAppId
The ID of application.
Integer32
Constraints:
range: 0-31
 .1.3.6.1.4.1.2011.2.33.8.1.1.1
posAppConnectMode
The connect mode of application.

If the router and unix are connected by TCP protocol,
the connect mode of application is tcp.

If the router and unix are connected by async interface,
the …
Enumerationr/w
Enumerated Values:
1tcp
2flow
3pad
 .1.3.6.1.4.1.2011.2.33.8.1.1.2
posAppState
The state of application.
Enumeration
Enumerated Values:
1noset
2down
3up
4ok
5kept
6linking
7linked
 .1.3.6.1.4.1.2011.2.33.8.1.1.3
posAppIfIndex
The interface index of the application
whose connect mode is flow or pad.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.2.33.8.1.1.4
posAppHostIP
The destination IP Address of application.
Used for the application whose connect mode is tcp.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.33.8.1.1.5
posAppPort
The destination port of application.
Used for the application whose connect mode is tcp.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.2.33.8.1.1.6
posAppSourceIp
The source IP Address of application.
Used for the application whose connect mode is tcp.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.33.8.1.1.7
posAppRecvPacCounter
The number of packets received by the application.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.33.8.1.1.8
posAppErrPacCounter
The number of error packets received by the application.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.33.8.1.1.9
posAppDistrErrCounter
The number of packets that could not be sent to POS.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.33.8.1.1.10
posAppBuffedCounter
The number of packets stored in the buffer of application.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.33.8.1.1.11
posAppDiscardedCounter
The number of packets discarded by the application.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.33.8.1.1.12
posAppDebug
The debugging switch of application.
Enumerationr/w
Enumerated Values:
1close
2open
 .1.3.6.1.4.1.2011.2.33.8.1.1.13
posAppRowStatus
The status of row. Only support active, CreateAndGo and destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.33.8.1.1.14
posAppX121Addr
The destination X121 Address of application which is
an octet string made up of numeric.
Used for the application whose connect mode is pad.
OctetStringr/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.2011.2.33.8.1.1.15

posInterTable

table
.1.3.6.1.4.1.2011.2.33.8.2 · 1 row entry · 11 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk posInterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-POS-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-POS-MIB::posInterTable' 
The table to get and set the POS-Interface informatin.
posInterEntry row .1.3.6.1.4.1.2011.2.33.8.2.1
The content of posInterTable.
Indexes
Column Syntax OID
posPosId
The ID of the POS-Interface.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.2.33.8.2.1.1
posPosIfIndex
The interface index of the POS-Interface whose type is fcm, asy or pad-client.
Integer32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2011.2.33.8.2.1.2
posPosConnectState
The state of the POS-Interface.
Enumeration
Enumerated Values:
1noset
2down
3up
4ok
 .1.3.6.1.4.1.2011.2.33.8.2.1.3
posPosRecvPacCounter
The number of packets received by the POS-Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.33.8.2.1.4
posPosErrPacCounter
The number of error packets received by the POS-Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.33.8.2.1.5
posPosMapErrCounter
The number of packets that could not be sent to application.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.33.8.2.1.6
posPosBuffedCounter
The number of packets stored in the buffer of the POS-Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.33.8.2.1.7
posPosDiscardedCounter
The number of packets discarded by the POS-Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.33.8.2.1.8
posPosInterDebug
The debugging switch of the POS-Interface.
Enumerationr/w
Enumerated Values:
1close
2open
 .1.3.6.1.4.1.2011.2.33.8.2.1.9
posPosInterRowStatus
The status of row. Only support active, CreateAndGo and destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.33.8.2.1.10
posPosInterType
The type of interface.

The POS-Access mode has four types: FCM-Access, ASYNC-Access,
simulating POSPAD device, POSPAD-Access.

FCM-Access mode means POS and router are connected through PS…
Enumerationr/w
Enumerated Values:
1fcm
2asy
3pad-client
4pad-server
 .1.3.6.1.4.1.2011.2.33.8.2.1.11

posMapTable

table
.1.3.6.1.4.1.2011.2.33.8.3 · 1 row entry · 3 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk posMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-POS-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-POS-MIB::posMapTable' 
The table to get and set the informatin of mapping relation of destination and application.
posMapEntry row .1.3.6.1.4.1.2011.2.33.8.3.1
The content of posMapTable.
Indexes
Column Syntax OID
posMapDes
The destination code of the mapping item.
If the value is -1, it is the default item of mapping relation.
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.2011.2.33.8.3.1.1
posMapAppNumber
The application index of the mapping item.
Integer32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.2011.2.33.8.3.1.2
posMapRowStatus
The status of row. Only support active, CreateAndGo and destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.33.8.3.1.3

posAsyAppTable

table
.1.3.6.1.4.1.2011.2.33.8.4 · 1 row entry · 2 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk posAsyAppTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-POS-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-POS-MIB::posAsyAppTable' 
The table to get and set the asynchronous-application interface information.
posAsyAppEntry row .1.3.6.1.4.1.2011.2.33.8.4.1
The content of posAsyAppTable.
Indexes
Column Syntax OID
posAsyAppIfIndex
The interface index of asynchronous-application.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.2.33.8.4.1.1
posAsyAppRowStatus
The status of row. Only support active, CreateAndGo and destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.33.8.4.1.2

posFCMTable

table
.1.3.6.1.4.1.2011.2.33.8.5 · 1 row entry · 3 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk posFCMTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-POS-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-POS-MIB::posFCMTable' 
The table to get the information of FCM interface.
posFCMEntry row .1.3.6.1.4.1.2011.2.33.8.5.1
The content of posFCMTable.
Indexes
Column Syntax OID
posFCMIfIndex
The index of FCM interface.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.2.33.8.5.1.1
posFCMTimeoutCounter
The number that modem was hung up for timeout.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.33.8.5.1.3
posFCMConnectFailCounter
The number that modem could not handshake successfully.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.33.8.5.1.4

posPadTable

table
.1.3.6.1.4.1.2011.2.33.8.22 · 1 row entry · 2 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk posPadTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-POS-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-POS-MIB::posPadTable' 
The table to enable or disable POSPAD-Access function under serial interface.
posPadEntry row .1.3.6.1.4.1.2011.2.33.8.22.1
The content of posPadTable.
Indexes
Column Syntax OID
posPadIfIndex
The index of serial interface.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2011.2.33.8.22.1.1
posPadRowStatus
The status of row. Only support active, CreateAndGo and destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.33.8.22.1.2