CES-ACR master PW change notification,indicates master pw change or master pw status change,this may happen when a
pw is deleted or the pw status change.
hwLosAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.10
This object indicates that a clear alarm is generated when signal loss at the receive end stops.
hwCposE1UpE1AisAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.100
This object indicates that an upstream alarm indication signal generated on an E1 link channelized from VC12 is cleared.
hwCposE1DownE1AisAlarm
.1.3.6.1.4.1.2011.5.25.157.2.101
This object indicates that a downstream alarm indication signal is generated on an E1 link channelized from VC12.
hwCposE1DownE1AisAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.102
This object indicates that the downstream alarm indication signal generated on an E1 link channelized from VC12 is cleared.
hwE1DownE1AisAlarm
.1.3.6.1.4.1.2011.5.25.157.2.103
This object indicates that a downstream alarm indication signal is generated on an E1 interface.
hwE1DownE1AisAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.104
This object indicates that the downstream alarm indication signal generated on an E1 interface is cleared.
hwLofAlarm
.1.3.6.1.4.1.2011.5.25.157.2.11
This object indicates that an out of frame (OOF) alarm is generated at the receive end.
hwCposE1LmfaAlarm
.1.3.6.1.4.1.2011.5.25.157.2.111
This object indicates that an out of multiframe (OOM) alarm is generated on the framed E1 channelized from VC12.
hwCposE1LmfaAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.112
This object indicates that the OOM alarm generated on the framed E1 channelized from VC12 is cleared.
hwLaserShutAlarm
.1.3.6.1.4.1.2011.5.25.157.2.113
This object indicates that an alarm is generated when the optical laser on a board is shut down.
hwLaserShutAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.114
This object indicates that a clear alarm is generated when the optical laser on a board is opened.
hwLaserAutoShutAlarm
.1.3.6.1.4.1.2011.5.25.157.2.115
This object indicates that an alarm is generated when the optical laser is shut down automatically.
hwLaserAutoShutAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.116
This object indicates that the alarm for the automatic shutdown of the optical laser is cleared.
hwLoopbackAlarm
.1.3.6.1.4.1.2011.5.25.157.2.117
This object indicates that an alarm is generated due to an interface loopback.
hwLoopbackAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.118
This object indicates that the alarm for the interface loopback is cleared.
hwOcdAlarm
.1.3.6.1.4.1.2011.5.25.157.2.119
Indicates the alarm is detected.
hwLofAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.12
This object indicates that a clear alarm is generated when frame loss at the receive end stops.
hwOcdAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.120
Indicates the alarm is cleared.
hwLcdAlarm
.1.3.6.1.4.1.2011.5.25.157.2.121
This object indicates an alarm for the loss of synchronization codes (SCs).
hwLcdAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.122
This object indicates that the alarm for the loss of synchronization codes (SCs) is cleared.
hwUhcsAlarm
.1.3.6.1.4.1.2011.5.25.157.2.123
Indicates the alarm is detected.
hwUhcsAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.124
Indicates the alarm is cleared.
hwChcsAlarm
.1.3.6.1.4.1.2011.5.25.157.2.125
Indicates the alarm is detected.
hwChcsAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.126
Indicates the alarm is cleared.
hwChannelLoopbackAlarm
.1.3.6.1.4.1.2011.5.25.157.2.127
Indicates the alarm is detected.
hwChannelLoopbackAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.128
Indicates the alarm is cleared.
hwCesLopsAlarm
.1.3.6.1.4.1.2011.5.25.157.2.129
Indicates the alarm is detected.
hwOofAlarm
.1.3.6.1.4.1.2011.5.25.157.2.13
This object indicates that an out of frame (OOF) alarm is generated at the receive end.
hwCesLopsAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.130
Indicates the alarm is cleared.
hwAtmPwLosPktExcAlarm
.1.3.6.1.4.1.2011.5.25.157.2.131
Indicates the alarm is detected.
hwAtmPwLosPktExcAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.132
Indicates the alarm is cleared.
hwAtmPwMisorderPktExcAlarm
.1.3.6.1.4.1.2011.5.25.157.2.133
Indicates the alarm is detected.
hwAtmPwMisorderPktExcAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.134
Indicates the alarm is cleared.
hwAtmPwUnknownCellExcAlarm
.1.3.6.1.4.1.2011.5.25.157.2.135
Indicates the alarm is detected.
hwAtmPwUnknownCellExcAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.136
Indicates the alarm is cleared.
hwOofAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.14
This object indicates that the OOF alarm generated at the receive end is cleared.
hwB1TcaAlarm
.1.3.6.1.4.1.2011.5.25.157.2.15
This object indicates that the number of error bits for the B1 RS exceeds a specified threshold.
hwInputErrorAlarm
.1.3.6.1.4.1.2011.5.25.157.2.153
This object indicates that an alarm is generated when the number of input errors on an interface exceeds the upper threshold.
hwInputErrorAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.154
This object indicates that a clear alarm is generated when the number of input errors on an interface falls below the upper threshold.
hwOutputErrorAlarm
.1.3.6.1.4.1.2011.5.25.157.2.155
This object indicates that an alarm is generated when the number of output errors on an interface exceeds the upper threshold.
hwOutputErrorAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.156
This object indicates that a clear alarm is generated when the number of output errors on an interface falls below the upper threshold.
hwPhysicalPortCrcError
.1.3.6.1.4.1.2011.5.25.157.2.157.1
Port Crc error alarm notification.
hwPhysicalPortCrcPacketErrorRatioResume
.1.3.6.1.4.1.2011.5.25.157.2.157.10
This object indicates that a clear alarm is generated when the number of CRC errors on a physical interface falls below the upper threshold. The host sends a trap message to the NMS.
hwPhysicalPortCrcSd
.1.3.6.1.4.1.2011.5.25.157.2.157.11
Port MAC_FCS_SD alarm notification.
hwPhysicalPortCrcSdResume
.1.3.6.1.4.1.2011.5.25.157.2.157.12
Port MAC_FCS_SD alarm resume.
hwPhysicalPortCrcExc
.1.3.6.1.4.1.2011.5.25.157.2.157.13
Port MAC_FCS_EXC alarm notification.
hwPhysicalPortCrcExcResume
.1.3.6.1.4.1.2011.5.25.157.2.157.14
Port MAC_FCS_EXC alarm resume notification.
hwPhysicalPortCrcPerWarning
.1.3.6.1.4.1.2011.5.25.157.2.157.15
Port CRC-PER(Packet Error Ratio) warning notification.
hwPhysicalPortCrcPerWarningResume
.1.3.6.1.4.1.2011.5.25.157.2.157.16
Port CRC-PER(Packet Error Ratio) warning resume notification.
hwInputBroadcastSurgeOccur
.1.3.6.1.4.1.2011.5.25.157.2.157.17.1
Input broadcast surge occurred.
hwInputBroadcastSurgeResume
.1.3.6.1.4.1.2011.5.25.157.2.157.17.2
Input broadcast surge resumed.
hwOutputBroadcastSurgeOccur
.1.3.6.1.4.1.2011.5.25.157.2.157.17.3
Output broadcast surge occurred.
hwOutputBroadcastSurgeResume
.1.3.6.1.4.1.2011.5.25.157.2.157.17.4
Output broadcast surge resumed.
hwPortCrcRateExceed
.1.3.6.1.4.1.2011.5.25.157.2.157.18
Indicates that the rate of the incoming traffic packets with CRC error exceeds the alarm threshold.
hwPortErrorRateExceed
.1.3.6.1.4.1.2011.5.25.157.2.157.19
Indicates that the rate of the incoming traffic error packets exceeds the alarm threshold.
hwPhysicalPortCrcErrorResume
.1.3.6.1.4.1.2011.5.25.157.2.157.2
Port Crc error alarm resume.
hwPhysicalPortInBroadcastRapidChange
.1.3.6.1.4.1.2011.5.25.157.2.157.20
Indicates that the rate of the input broadcast exceeds the threshold.
hwPhysicalPortCrcRatioExceed
.1.3.6.1.4.1.2011.5.25.157.2.157.21
Indicates that the ratio of CRC packets exceeds the alarm threshold.
hwPhysicalPortCrcRatioResume
.1.3.6.1.4.1.2011.5.25.157.2.157.22
Indicates that the ratio of CRC packets falls below the alarm threshold.
hwPhysicalPortSymbolError
.1.3.6.1.4.1.2011.5.25.157.2.157.3
This object indicates the Symbol error alarm.
hwPhysicalPortSymbolErrorResume
.1.3.6.1.4.1.2011.5.25.157.2.157.4
This object indicates that the Symbol error alarm is cleared.
hwPhysicalPortSdhError
.1.3.6.1.4.1.2011.5.25.157.2.157.5
This object indicates the Input error alarm.
hwPhysicalPortSdhErrorResume
.1.3.6.1.4.1.2011.5.25.157.2.157.6
This object indicates that the Input error alarm is cleared.
hwPhysicalPortBip8SdError
.1.3.6.1.4.1.2011.5.25.157.2.157.7
This object indicates the Output error alarm.
hwPhysicalPortBip8SdErrorResume
.1.3.6.1.4.1.2011.5.25.157.2.157.8
This object indicates that the Output error alarm is cleared.
hwPhysicalPortCrcPacketErrorRatio
.1.3.6.1.4.1.2011.5.25.157.2.157.9
This object indicates that an alarm is generated when the number of CRC errors on a physical interface exceeds the upper threshold. The host sends a trap message to the NMS.
hwB1TcaAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.16
This object indicates that the number of error bits for the B1 RS falls below the specified threshold.
hwLoopBackAutoClearNotice
.1.3.6.1.4.1.2011.5.25.157.2.160
set port undo loopback while set loopback autoclear enable when time out.
hwChannelLoopBackAutoClearNotice
.1.3.6.1.4.1.2011.5.25.157.2.161
set channel undo loopback while set loopback autoclear enable when time out.
hwHpJ1TiuAlarm
.1.3.6.1.4.1.2011.5.25.157.2.162
This object indicates that an alarm is generated when the higher order path (HP) trace identifier is unstable.
hwHpJ1TiuAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.163
This object indicates that a clear alarm is generated when the higher order path (HP) trace identifier becomes stable.
hwPortAlarmInverseAutoRecover
.1.3.6.1.4.1.2011.5.25.157.2.164
Port alarm inverse auto recover.
hwB1ExcAlarm
.1.3.6.1.4.1.2011.5.25.157.2.165
This object indicates that an alarm is generated when the number of B1 errors exceeds a specified threshold.
hwB1ExcAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.166
This object indicates that a clear alarm is generated when the number of B1 errors falls below a specified threshold.
hwB3ExcAlarm
.1.3.6.1.4.1.2011.5.25.157.2.167
This object indicates that an alarm is generated when the number of B3 errors exceeds a specified threshold.
hwB3ExcAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.168
This object indicates that a clear alarm is generated when the number of B3 errors falls below a specified threshold.
hwBip2ExcAlarm
.1.3.6.1.4.1.2011.5.25.157.2.169
This object indicates that an alarm is generated when the number of BIP2 errors exceeds a specified threshold.
hwB2TcaAlarm
.1.3.6.1.4.1.2011.5.25.157.2.17
This object indicates that the number of error bits for the B2 RS exceeds a specified threshold.
hwBip2ExcAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.170
This object indicates that a clear alarm is generated when the number of BIP2 errors falls below a specified threshold.
hwLicenseLimitAlarm
.1.3.6.1.4.1.2011.5.25.157.2.171
Indicates the alarm is detected.
hwLicenseLimitAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.172
Indicates the alarm is cleared.
hwOpticalModuleIsNotAuthorized
.1.3.6.1.4.1.2011.5.25.157.2.173
This object indicates that an alarm is generated when the inserted optical module is one not authenticated by Huawei.
hwOpticalModuleIsNotAuthorizedResume
.1.3.6.1.4.1.2011.5.25.157.2.174
This object indicates that a clear alarm is generated when the non-Huawei-authenticated optical module is removed.
hwLocalFaultAlarm
.1.3.6.1.4.1.2011.5.25.157.2.175
This object indicates that an alarm is generated when the receive link from the remote device to the local device fails.
hwLocalFaultAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.176
This object indicates that a clear alarm is generated when the receive link from the remote device to the local device recovers.
hwRemoteFaultAlarm
.1.3.6.1.4.1.2011.5.25.157.2.177
This object indicates that an alarm is generated when the transmit link from the remote device to the local device fails.
hwRemoteFaultAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.178
This object indicates that a clear alarm is generated when the transmit link from the remote device to the local device recovers.
hwCopperPolarityError
.1.3.6.1.4.1.2011.5.25.157.2.179
This object indicates that an alarm is generated when a polarity error occurs on an electrical interface.
hwB2TcaAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.18
This object indicates that the number of error bits for the B2 RS falls below the specified threshold.
hwCopperPolarityErrorResume
.1.3.6.1.4.1.2011.5.25.157.2.180
This object indicates that a clear alarm is generated when the polarity error on an electrical interface is cleared.
hwLotuaisAlarm
.1.3.6.1.4.1.2011.5.25.157.2.181
Indicates the alarm is detected.
hwLotuaisAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.182
Indicates the alarm is cleared.
hwLotulomAlarm
.1.3.6.1.4.1.2011.5.25.157.2.183
Indicates the alarm is detected.
hwLotulomAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.184
Indicates the alarm is cleared.
hwLotusdberAlarm
.1.3.6.1.4.1.2011.5.25.157.2.185
Indicates the alarm is detected.
hwLotusdberAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.186
Indicates the alarm is cleared.
hwLotusfberAlarm
.1.3.6.1.4.1.2011.5.25.157.2.187
Indicates the alarm is detected.
hwLotusfberAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.188
Indicates the alarm is cleared.
hwLoduaisAlarm
.1.3.6.1.4.1.2011.5.25.157.2.189
Indicates the alarm is detected.
hwJ0TimAlarm
.1.3.6.1.4.1.2011.5.25.157.2.19
This object indicates that an alarm for trace identifier mismatch is generated.
hwLoduaisAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.190
Indicates the alarm is cleared.
hwLodulckAlarm
.1.3.6.1.4.1.2011.5.25.157.2.191
Indicates the alarm is detected.
hwLodulckAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.192
Indicates the alarm is cleared.
hwLoduociAlarm
.1.3.6.1.4.1.2011.5.25.157.2.193
Indicates the alarm is detected.
hwLoduociAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.194
Indicates the alarm is cleared.
hwLpmbdiAlarm
.1.3.6.1.4.1.2011.5.25.157.2.195
Indicates the alarm is detected.
hwLpmbdiAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.196
Indicates the alarm is cleared.
hwLpmtimAlarm
.1.3.6.1.4.1.2011.5.25.157.2.197
Indicates the alarm is detected.
hwLpmtimAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.198
Indicates the alarm is cleared.
hwLsmbdiAlarm
.1.3.6.1.4.1.2011.5.25.157.2.199
Indicates the alarm is detected.
hwDslImaGroupLEDown
.1.3.6.1.4.1.2011.5.25.157.2.2.1
The ima group local edge down notification.
hwDslImaGroupLEUp
.1.3.6.1.4.1.2011.5.25.157.2.2.2
The ima group local edge up notification.
hwDslImaGroupREDown
.1.3.6.1.4.1.2011.5.25.157.2.2.3
The ima group remote edge down notification.
hwDslImaGroupREUp
.1.3.6.1.4.1.2011.5.25.157.2.2.4
The ima group remote edge up notification.
hwJ0TimAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.20
This object indicates that the alarm for trace identifier mismatch is cleared.
hwLsmbdiAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.200
Indicates the alarm is cleared.
hwLsmiaeAlarm
.1.3.6.1.4.1.2011.5.25.157.2.201
Indicates the alarm is detected.
hwLsmiaeAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.202
Indicates the alarm is cleared.
hwLsmtimAlarm
.1.3.6.1.4.1.2011.5.25.157.2.203
Indicates the alarm is detected.
hwLsmtimAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.204
Indicates the alarm is cleared.
hwNegotiationFailedAlarm
.1.3.6.1.4.1.2011.5.25.157.2.205
Auto-negotiation failure alarm. Possible causes, including the local auto-negotiation configuration with the peer inconsistencies;
the local ability is not compatible with the peer;
the physical connection of the two sides is unstable.
When the alarm occurs, the port can't be up.
hwNegotiationFailedAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.206
Auto-negotiation failure alarm resume.
hwEthHalfDuplex
.1.3.6.1.4.1.2011.5.25.157.2.207
The port works in the half-duplex mode.
hwEthFullDuplex
.1.3.6.1.4.1.2011.5.25.157.2.208
The half-duplex mode alarm resume.
hwPhysicalPortAutoDetectFail
.1.3.6.1.4.1.2011.5.25.157.2.209
Interface auto adapter fail alarm notification.
hwLrdiAlarm
.1.3.6.1.4.1.2011.5.25.157.2.21
This object indicates that a line remote defect indicator (LRDI) alarm is generated in the multiplex section (MS) at the remote end.
hwPhysicalPortAutoDetectSuccess
.1.3.6.1.4.1.2011.5.25.157.2.210
Interface auto adapter fail alarm resume notification.
hwNotSameBoardInTrunk
.1.3.6.1.4.1.2011.5.25.157.2.211
Not same boards in Eth-trunk.
hwOtuLomAlarm
.1.3.6.1.4.1.2011.5.25.157.2.212.1
This object indicates the OTU indication signal alarm.
hwSmBdiAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.212.10
This object indicates that the backward defect indication (BDI) alarm is cleared.
hwSmIaeAlarm
.1.3.6.1.4.1.2011.5.25.157.2.212.11
This object indicates that an alarm is generated when the ODU frame alignment between the local and remote ends is incorrect.
hwSmIaeAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.212.12
This object indicates that a clear alarm is generated when the ODU frame alignment error between the local and remote ends is corrected.
hwSmTimAlarm
.1.3.6.1.4.1.2011.5.25.157.2.212.13
This object indicates that an alarm is generated when TIM trace identifiers between the local and remote ends mismatch.
hwSmTimAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.212.14
This object indicates that a clear alarm is generated when TIM trace identifiers between the local and remote ends match.
hwOduAisAlarm
.1.3.6.1.4.1.2011.5.25.157.2.212.15
This object indicates the ODU indication signal alarm.
hwOduAisAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.212.16
This object indicates that the ODU indication signal alarm is cleared.
hwOduLokAlarm
.1.3.6.1.4.1.2011.5.25.157.2.212.17
This object indicates the ODU lock defect alarm.
hwOduLokAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.212.18
This object indicates that the ODU lock defect alarm is cleared.
hwOduOciAlarm
.1.3.6.1.4.1.2011.5.25.157.2.212.19
This object indicates that the indication defect alarm for the ODU open connection.
hwOtuLomAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.212.2
This object indicates that the OTU indication signal alarm is cleared.
hwOduOciAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.212.20
This object indicates that the indication defect alarm for the ODU open connection is cleared.
hwPmBdiAlarm
.1.3.6.1.4.1.2011.5.25.157.2.212.21
This object indicates that the backward defect indication (BDI) alarm is generated.
hwPmBdiAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.212.22
This object indicates that the backward defect indication (BDI) alarm is cleared.
hwPmTimAlarm
.1.3.6.1.4.1.2011.5.25.157.2.212.23
This object indicates that an alarm is generated when path trace identifiers between the local and remote ends mismatch.
hwPmTimAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.212.24
This object indicates that a clear alarm is generated when path trace identifiers between the local and remote ends match.
hwPrefecTcaAlarm
.1.3.6.1.4.1.2011.5.25.157.2.212.25
This object indicates that an alarm is generated for forward error correction (FEC) bit errors.
hwPrefecTcaAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.212.26
This object indicates that a clear alarm is generated when forward error correction (FEC) bit errors are removed.
hwOduSdAlarm
.1.3.6.1.4.1.2011.5.25.157.2.212.27
This object indicates that an alarm is generated for the ODU signal degrade.
hwOduSdAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.212.28
This object indicates that the alarm for the ODU signal degrade is cleared.
hwOtuAisAlarm
.1.3.6.1.4.1.2011.5.25.157.2.212.3
This object indicates the OTU indication signal alarm.
hwOtuAisAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.212.4
This object indicates that the OTU indication signal alarm is cleared.
hwOtuSdAlarm
.1.3.6.1.4.1.2011.5.25.157.2.212.5
This object indicates that an alarm is generated for the OTU signal degrade.
hwOtuSdAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.212.6
This object indicates that the alarm for the OTU signal degrade is cleared.
hwOtuSfAlarm
.1.3.6.1.4.1.2011.5.25.157.2.212.7
This object indicates that an alarm is generated for the OTU signal failure.
hwOtuSfAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.212.8
This object indicates that the alarm for the OTU signal degrade is cleared.
hwSmBdiAlarm
.1.3.6.1.4.1.2011.5.25.157.2.212.9
This object indicates that the backward defect indication (BDI) alarm is generated.
hwE3UpE3AisAlarm
.1.3.6.1.4.1.2011.5.25.157.2.213
Indicates the alarm is detected.
hwE3UpE3AisAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.214
Indicates the alarm is cleared.
hwE3AlmE3RaiAlarm
.1.3.6.1.4.1.2011.5.25.157.2.215
Indicates the alarm is detected.
hwE3AlmE3RaiAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.216
Indicates the alarm is cleared.
hwMultiServiceOnOneCardAlarm
.1.3.6.1.4.1.2011.5.25.157.2.217
Multiple services be configured on the same subcard.
hwMultiServiceOnOneCardAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.218
There is no multiple services on the same subcard.
hwInputRateChangeOverThresholdNotice
.1.3.6.1.4.1.2011.5.25.157.2.219
The input rate change ratio exceeded the threshold.
hwLrdiAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.22
This object indicates that the LRDI alarm generated in the MS at the remote end is cleared.
hwOutputRateChangeOverThresholdNotice
.1.3.6.1.4.1.2011.5.25.157.2.220
The output rate change ratio exceeded the threshold.
hwX50LofAlarm
.1.3.6.1.4.1.2011.5.25.157.2.221.1
X.50 sub-rate out of frame occurred.
hwX50LofAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.221.2
X.50 sub-rate out of frame was cleared.
hwX50AbitAlarm
.1.3.6.1.4.1.2011.5.25.157.2.221.3
X.50 deframing failed on the remote device.
hwX50AbitAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.221.4
The X.50 deframing failure was cleared on the remote device.
hwLinkHeartbeatDropAlarm
.1.3.6.1.4.1.2011.5.25.157.2.222
Link-heartbeat drop alarm.
hwLinkHeartbeatDropAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.223
Link-heartbeat drop alarm resume.
hwLinkHeartbeatChangeAlarm
.1.3.6.1.4.1.2011.5.25.157.2.224
Link-heartbeat change alarm.
hwLinkHeartbeatChangeAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.225
Link-heartbeat change alarm resume.
hwPortPhysicalRateDegradeAlarm
.1.3.6.1.4.1.2011.5.25.157.2.226
This object indicates that an alarm is generated when the negotiation rate on an electrical interface falls sharply.
hwPortPhysicalRateDegradeAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.227
This object indicates that a clear alarm is generated when the negotiation rate on an electrical interface stops falling sharply.
hwLicenseInactiveAlarm
.1.3.6.1.4.1.2011.5.25.157.2.228
The interface license was not activated.
hwLicenseInactiveAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.229
The interface license inactivation alarm was cleared.
hwSfbereAlarm
.1.3.6.1.4.1.2011.5.25.157.2.23
This object indicates that the number of error bits for the B2 RS exceeds a specified threshold.
hwLicenseResourceLackAlarm
.1.3.6.1.4.1.2011.5.25.157.2.230
Interfaces of this type in use exceeded the maximum number.
hwLicenseResourceLackAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.231
The maximum number-crossing alarm was cleared.
hwPortModeChangeTrap
.1.3.6.1.4.1.2011.5.25.157.2.232
This object indicates that the port rate type is changed.
hwRdiAlarm
.1.3.6.1.4.1.2011.5.25.157.2.233
The peer end was faulty.
hwRdiAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.234
The peer end recovered from faults.
hwAisAlarm
.1.3.6.1.4.1.2011.5.25.157.2.235
Upstream signals were abnormal.
hwAisAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.236
Upstream signals recovered.
hwCollisionAlarm
.1.3.6.1.4.1.2011.5.25.157.2.237
The link encountered a collision.
hwCollisionAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.238
The link recovered from a collision.
hwSubIfNumExceededSpecAlarm
.1.3.6.1.4.1.2011.5.25.157.2.239
The nunber of sub interface exceeded spec alarm.
hwSfbereAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.24
This object indicates that the number of error bits for the B2 RS falls below the specified threshold.
hwSubIfNumExceededSpecAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.240
The number of sub interface exceeded spec alarm resume.
hwPortSpeedChangeTrap
.1.3.6.1.4.1.2011.5.25.157.2.241
The speed of port is changed.
hwPortGroupTransModeDiff
.1.3.6.1.4.1.2011.5.25.157.2.242
This group of interfaces do not work in the same transmission mode.
hwPortGroupTransModeDiffResume
.1.3.6.1.4.1.2011.5.25.157.2.243
This group of interfaces work in the same transmission mode now.
hwImpedanceMismatch
.1.3.6.1.4.1.2011.5.25.157.2.244
The configured interface impedance value did not match that of the cable.
hwPicLcdAlarm
.1.3.6.1.4.1.2011.5.25.157.2.245
Loss of code group synchronization alarm is detected.
hwPicLcdAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.246
Loss of code group synchronization alarm is cleared.
hwBoardNotSupportAssignTrunk
.1.3.6.1.4.1.2011.5.25.157.2.247
The card does not support extensions of Eth-Trunk specifications.
hwPortProtectGroupUnavailable
.1.3.6.1.4.1.2011.5.25.157.2.248
The port protection group is unavailable.
hwPortProtectGroupAvailable
.1.3.6.1.4.1.2011.5.25.157.2.249
The port protection group is available.
hwAuLopAlarm
.1.3.6.1.4.1.2011.5.25.157.2.25
This object indicates the loss of the AU pointer.
hwPortProtectGroupDelete
.1.3.6.1.4.1.2011.5.25.157.2.250
The port protection group was deleted.
hwDelayOverConfig
.1.3.6.1.4.1.2011.5.25.157.2.251
Real-time E2E Delay Exceeded the Configured Delay.
hwDelayOverConfigResume
.1.3.6.1.4.1.2011.5.25.157.2.252
Alarm Indicating the Real-time E2E Delay Exceeded the Configured Delay Was Cleared.
hwAcBlockAlarm
.1.3.6.1.4.1.2011.5.25.157.2.253
AC interface blocking alarm.
hwAcBlockAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.254
AC interface blocking alarm clearing.
hwPortLicenseActFail
.1.3.6.1.4.1.2011.5.25.157.2.255
This object indicates that the license for a physical interface fails to be activated.
hwPortLicenseActSuccess
.1.3.6.1.4.1.2011.5.25.157.2.256
This object indicates that the license for a physical interface is successfully activated.
hwCableSnrAbnormal
.1.3.6.1.4.1.2011.5.25.157.2.257
The network cable is of poor quality.
hwCableSnrNormal
.1.3.6.1.4.1.2011.5.25.157.2.258
The network cable is of good quality.
hwCableSnrDetectNotSupport
.1.3.6.1.4.1.2011.5.25.157.2.259
The network cable quality cannot be detected.
hwAuLopAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.26
This object indicates that the alarm for the loss of the AU pointer is cleared.
hwFlexEPhyNumberMismatch
.1.3.6.1.4.1.2011.5.25.157.2.260
Indicates the alarm is detected.
hwFlexEPhyNumberMismatchResume
.1.3.6.1.4.1.2011.5.25.157.2.261
Indicates the alarm is cleared.
hwFlexEPhyGroupMismatch
.1.3.6.1.4.1.2011.5.25.157.2.262
Indicates the alarm is detected.
hwFlexEPhyGroupMismatchResume
.1.3.6.1.4.1.2011.5.25.157.2.263
Indicates the alarm is cleared.
hwFlexEClientIDMismatch
.1.3.6.1.4.1.2011.5.25.157.2.264
Indicates the alarm is detected.
hwFlexEClientIDMismatchResume
.1.3.6.1.4.1.2011.5.25.157.2.265
Indicates the alarm is cleared.
hwFlexEBwReduceAlarm
.1.3.6.1.4.1.2011.5.25.157.2.266
Indicates the alarm is detected.
hwFlexEBwReduceAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.267
Indicates the alarm is cleared.
hwFlexEPhyFcsSdAlarm
.1.3.6.1.4.1.2011.5.25.157.2.268
Indicates the alarm is detected.
hwFlexEPhyFcsSdAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.269
Indicates the alarm is cleared.
hwLaisAlarm
.1.3.6.1.4.1.2011.5.25.157.2.27
This object indicates the indication signal alarm in the MS.
hwFlexEPhyLocalFaultAlarm
.1.3.6.1.4.1.2011.5.25.157.2.270
Indicates the alarm is detected.
hwFlexEPhyLocalFaultAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.271
Indicates the alarm is cleared.
hwFlexEPhyRemoteFaultAlarm
.1.3.6.1.4.1.2011.5.25.157.2.272
Indicates the alarm is detected.
hwFlexEPhyRemoteFaultAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.273
Indicates the alarm is cleared.
hwFlexEBwMismatch
.1.3.6.1.4.1.2011.5.25.157.2.274
Indicates the alarm is detected.
hwFlexEBwMismatchResume
.1.3.6.1.4.1.2011.5.25.157.2.275
Indicates the alarm is cleared.
hwFlexEPhyDelayOverAlarm
.1.3.6.1.4.1.2011.5.25.157.2.276
Indicates the alarm is detected.
hwFlexEPhyDelayOverAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.277
Indicates the alarm is cleared.
hwFlexESubTimeSlotMismatch
.1.3.6.1.4.1.2011.5.25.157.2.278
Indicates the alarm is detected.
hwFlexESubTimeSlotMismatchResume
.1.3.6.1.4.1.2011.5.25.157.2.279
Indicates the alarm is cleared.
hwLaisAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.28
This object indicates that the indication signal alarm in the MS is cleared.
hwVxlanTrunkHashNotSupport
.1.3.6.1.4.1.2011.5.25.157.2.280
The Eth-Trunk can not function normally as an outbound interface for vxlan packets when IP address-based load balancing is configured.
hwPvcNumAlarm
.1.3.6.1.4.1.2011.5.25.157.2.281
PVC number exceeded the upper threshold.
hwPvcNumAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.282
PVC number alarm resumed.
hwEthoamClosePortAlarm
.1.3.6.1.4.1.2011.5.25.157.2.283
The service interface is disabled by Ethernet OAM.
hwPortTypeChangeTrap
.1.3.6.1.4.1.2011.5.25.157.2.284
The mode of combo port is changed.
hwComboSwitchFail
.1.3.6.1.4.1.2011.5.25.157.2.285
Combo switch fail alarm.
hwComboSwitchFailResume
.1.3.6.1.4.1.2011.5.25.157.2.286
Combo switch fail alarm resume.
hwEthoamClosePortAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.287
The service interface is undo disable by Ethernet OAM.
hwVSPortConfigFail
.1.3.6.1.4.1.2011.5.25.157.2.288
Configurations failed to be delivered to VS interconnection interfaces.
hwVSPortConfigFailResume
.1.3.6.1.4.1.2011.5.25.157.2.289
Configurations failed to be delivered to VS interconnection interfaces resume.
hwSdbereAlarm
.1.3.6.1.4.1.2011.5.25.157.2.29
This object indicates the signal degrade in the B2 MS.
hwPortResourceDeadLine
.1.3.6.1.4.1.2011.5.25.157.2.290
Port authorization grace period alarm.
hwPortResourceDeadLineResume
.1.3.6.1.4.1.2011.5.25.157.2.291
Port authorization grace period alarm resume.
hwPortLRMStateAbnormal
.1.3.6.1.4.1.2011.5.25.157.2.292
Optical module of this interface does not match with LRM mode.
hwTrunkUUHashRisk
.1.3.6.1.4.1.2011.5.25.157.2.293
Unknown unicast hash risk if an inter-board Eth-Trunk exists.
hwEthRxFlowFallAlarm
.1.3.6.1.4.1.2011.5.25.157.2.294
Traffic fall alarm in the receive direction of an Ethernet interface.
hwEthRxFlowFallAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.295
Traffic fall clear alarm in the receive direction of an Ethernet interface.
hwEthTxFlowFallAlarm
.1.3.6.1.4.1.2011.5.25.157.2.296
Traffic fall alarm in the transmit direction of an Ethernet interface.
hwEthTxFlowFallAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.297
Traffic fall clear alarm in the transmit direction of an Ethernet interface.
hwDot3brAbnormalAlarm
.1.3.6.1.4.1.2011.5.25.157.2.298
The 802.3br negotiation status is abnormal.
hwDot3brAbnormalAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.299
The 802.3br negotiation status is restored to normal.
hwDslImaLinkLif
.1.3.6.1.4.1.2011.5.25.157.2.3.1
The ima link lif notification.
hwDslImaLinkReRxUsable
.1.3.6.1.4.1.2011.5.25.157.2.3.10
The ima link remote tx usable notification.
hwDslImaLinkLifResume
.1.3.6.1.4.1.2011.5.25.157.2.3.2
The ima link lif resume notification.
hwDslImaLinkLods
.1.3.6.1.4.1.2011.5.25.157.2.3.3
The ima link lods notification.
hwDslImaLinkLodsResume
.1.3.6.1.4.1.2011.5.25.157.2.3.4
The ima link lods resume notification.
hwDslImaLinkRfi
.1.3.6.1.4.1.2011.5.25.157.2.3.5
The ima link rfi notification.
hwDslImaLinkRfiResume
.1.3.6.1.4.1.2011.5.25.157.2.3.6
The ima link rfi resume notification.
hwDslImaLinkReTxUnusable
.1.3.6.1.4.1.2011.5.25.157.2.3.7
The ima link remote tx unusable notification.
hwDslImaLinkReTxUsable
.1.3.6.1.4.1.2011.5.25.157.2.3.8
The ima link remote tx usable notification.
hwDslImaLinkReRxUnusable
.1.3.6.1.4.1.2011.5.25.157.2.3.9
The ima link remote rx unusable notification.
hwSdbereAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.30
This object indicates that the alarm for the signal degrade in the B2 MS is cleared.
hwInputDiscardNotice
.1.3.6.1.4.1.2011.5.25.157.2.300
Indicates that the interface input discard exceed the trap threshold.
hwOutputDiscardNotice
.1.3.6.1.4.1.2011.5.25.157.2.301
Indicates that the interface output discard exceed the trap threshold.
hwFlowControlDeadLockAlarm
.1.3.6.1.4.1.2011.5.25.157.2.303
The flowcontrol deadlock alarm has occurred.
hwFlowControlDeadLockAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.304
The flowcontrol deadlock alarm has resumed.
hwTunnelIfNumExceededSpecAlarm
.1.3.6.1.4.1.2011.5.25.157.2.305
The number of Tunnel interfaces exceeds the limit.
hwFlexEGrpFecModeMismatch
.1.3.6.1.4.1.2011.5.25.157.2.306
The FEC modes of the FlexE physical interfaces in the FlexEGroup mismatch alarm.
hwFlexEGrpFecModeMismatchResume
.1.3.6.1.4.1.2011.5.25.157.2.307
The FEC modes of the FlexE physical interfaces in the FlexEGroup mismatch alarm resume.
hwIfmPortBurstAlarm
.1.3.6.1.4.1.2011.5.25.157.2.308
This object indicates that a alarm is generated at the port burst.
hwPhysicalModeInconsistentAlarm
.1.3.6.1.4.1.2011.5.25.157.2.309
Port physical work mode inconsistent alarm.
hwPtimAlarm
.1.3.6.1.4.1.2011.5.25.157.2.31
This object indicates that an alarm is generated when the higher order path (HP) trace identifier is unstable.
hwPhysicalModeInconsistentAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.310
Port physical work mode inconsistent alarm resume.
hwFlexECalendarMismatch
.1.3.6.1.4.1.2011.5.25.157.2.311
Alarm of mismatch between the actually received and expected client calendars on the FlexE Group.
hwFlexECalendarMismatchResume
.1.3.6.1.4.1.2011.5.25.157.2.312
The alarm of mismatch between the actually received and expected client calendars on the FlexE Group is cleared.
hwFlexETimeSlotMismatch
.1.3.6.1.4.1.2011.5.25.157.2.313
Timeslot of the butted FlexE interface is mismatch.
hwFlexETimeSlotMismatchResume
.1.3.6.1.4.1.2011.5.25.157.2.314
Timeslot of the butted FlexE interface is mismatch resume.
hwFlexEGrpNegotiationFail
.1.3.6.1.4.1.2011.5.25.157.2.315
FlexE group negotiation fail alarm.
hwFlexEGrpNegotiationFailResume
.1.3.6.1.4.1.2011.5.25.157.2.316
FlexE group negotiation fail alarm resume.
hwFlexEGrpSpeedModeMismatch
.1.3.6.1.4.1.2011.5.25.157.2.317
The speed modes of the FlexE physical interfaces in the FlexEGroup mismatch alarm.
hwFlexEGrpSpeedModeMismatchResume
.1.3.6.1.4.1.2011.5.25.157.2.318
The speed modes of the FlexE physical interfaces in the FlexEGroup mismatch alarm resume.
hwPortSfpNotSupportSingleFiber
.1.3.6.1.4.1.2011.5.25.157.2.319
Optical modules do not support single-fiber optical modules.
hwPtimAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.32
This object indicates that a clear alarm is generated when the higher order path (HP) trace identifier becomes stable.
hwE1CasAlarm
.1.3.6.1.4.1.2011.5.25.157.2.320
This object indicates that the number of errored seconds exceeds a specified threshold.
hwE1CasAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.321
This object indicates that the number of errored seconds falls below a specified threshold.
hwFlexEGrpPaddingMismatch
.1.3.6.1.4.1.2011.5.25.157.2.322
The padding status of different PHYs in the FlexE group is inconsistent.
hwFlexEGrpPaddingMismatchResume
.1.3.6.1.4.1.2011.5.25.157.2.323
The padding status of different PHYs in the FlexE group is inconsistent.
hwOpticalAmplifierGainHigh
.1.3.6.1.4.1.2011.5.25.157.2.324
The gain of the optical module is too high.
hwOpticalAmplifierGainHighResume
.1.3.6.1.4.1.2011.5.25.157.2.325
The gain of the optical module too high has resumed.
hwOpticalAmplifierGainLow
.1.3.6.1.4.1.2011.5.25.157.2.326
The gain of the optical module is too low.
hwOpticalAmplifierGainLowResume
.1.3.6.1.4.1.2011.5.25.157.2.327
The gain of the optical module too low has resumed.
hwPortSfpWorkOnlyNonNego
.1.3.6.1.4.1.2011.5.25.157.2.328
When an SFP module is installed, the port can work only at 1000 Mbit/s in non-auto-negotiation mode.
hwPortGroupModeInvalid
.1.3.6.1.4.1.2011.5.25.157.2.329
The rate and PLL of the ports in the group do not match.
hwPuneqAlarm
.1.3.6.1.4.1.2011.5.25.157.2.33
This object indicates that an alarm is generated when the higher order path (HP) is unequipped.
hwPortGroupModeInvalidResume
.1.3.6.1.4.1.2011.5.25.157.2.330
The rate and PLL of the ports in the group match now.
hwPortErrPktSpeedDownGrade
.1.3.6.1.4.1.2011.5.25.157.2.331
The number of error packets exceeds the threshold, triggering automatic rate reduction on the interface.
hwPortErrPktSpeedDownGradeResume
.1.3.6.1.4.1.2011.5.25.157.2.332
The number of error packets is lower than the threshold and the interface rate is automatically recovered.
hwPuneqAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.34
This object indicates that a clear alarm is generated when the higher order path (HP) is equipped.
hwPrdiAlarm
.1.3.6.1.4.1.2011.5.25.157.2.35
This object indicates the higher order path (HP) Remote Default Indication (HPRDI) alarm.
hwPrdiAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.36
This object indicates that the HPRDI alarm is cleared.
hwB3TcaAlarm
.1.3.6.1.4.1.2011.5.25.157.2.37
This object indicates that the number of bit errors on the B3 higher order path (HP) exceeds the upper threshold.
hwB3TcaAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.38
This object indicates that the number of bit errors on the B3 higher order path (HP) falls below the upper threshold.
hwPplmAlarm
.1.3.6.1.4.1.2011.5.25.157.2.39
This object indicates the higher order path (HP) signal identifier mismatch.
hwDslLinkFrameLost
.1.3.6.1.4.1.2011.5.25.157.2.4.1
The dsl link frame lost notification.
hwDslLinkFrameResume
.1.3.6.1.4.1.2011.5.25.157.2.4.2
The dsl link frame resume notification.
hwDslLinkSignalLost
.1.3.6.1.4.1.2011.5.25.157.2.4.3
The dsl link signal lost notification.
hwDslLinkSignalResume
.1.3.6.1.4.1.2011.5.25.157.2.4.4
The dsl link signal resume notification.
hwPplmAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.40
This object indicates that the higher order path (HP) signal identifier mismatch is rectified.
hwPaisAlarm
.1.3.6.1.4.1.2011.5.25.157.2.41
This object indicates that a path alarm indication signal is detected.
hwPaisAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.42
This object indicates that the path alarm indication signal is removed.
hwAuAisAlarm
.1.3.6.1.4.1.2011.5.25.157.2.43
This object indicates that a higher order path (HP) indication signal alarm is generated.
hwAuAisAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.44
This object indicates that the higher order path (HP) indication signal alarm is cleared.
hwVlopAlarm
.1.3.6.1.4.1.2011.5.25.157.2.45
This object indicates that an alarm is generated when the administrative unit (AU) pointer is lost.
hwVlopAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.46
This object indicates that the alarm generated due to the loss of the AU pointer is cleared.
hwLomAlarm
.1.3.6.1.4.1.2011.5.25.157.2.47
This object indicates the loss of multiframe (LOM) on the higher order path (HP).
hwLomAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.48
This object indicates that the LOM on the higher order path (HP) is resolved.
hwLpTimVc12Alarm
.1.3.6.1.4.1.2011.5.25.157.2.49
Indicates the alarm is detected.
hwCesPwRemoteLosPktAlarm
.1.3.6.1.4.1.2011.5.25.157.2.5
Indicates the alarm is detected.
hwLpTimVc12AlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.50
Indicates the alarm is cleared.
hwLpUneqVc12Alarm
.1.3.6.1.4.1.2011.5.25.157.2.51
This object indicates that a lower order path (LP) unequipped indication signal (PUNEQ) alarm is generated.
hwLpUneqVc12AlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.52
This object indicates that the PUNEQ alarm is cleared.
hwVrdiAlarm
.1.3.6.1.4.1.2011.5.25.157.2.53
This object indicates that a lower order path (LP) remote defect indication (PRDI) alarm is generated.
hwVrdiAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.54
This object indicates that the PRDI alarm is cleared.
hwBip2TcaAlarm
.1.3.6.1.4.1.2011.5.25.157.2.57
This object indicates that an alarm is generated for the BIP signal degrade.
hwBip2TcaAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.58
This object indicates that the alarm for the BIP signal degrade is cleared.
hwLpSlmVc12Alarm
.1.3.6.1.4.1.2011.5.25.157.2.59
This object indicates a lower order path (LP) signal label mismatch alarm.
hwCesPwRemoteLosPktAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.6
Indicates the alarm is cleared.
hwLpSlmVc12AlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.60
This object indicates that the lower order path (LP) signal label mismatch alarm is cleared.
hwTuAisVc12Alarm
.1.3.6.1.4.1.2011.5.25.157.2.61
This object indicates TU alarm indication.
hwTuAisVc12AlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.62
This object indicates that the TU alarm is cleared.
hwE1EstcaAlarm
.1.3.6.1.4.1.2011.5.25.157.2.63
This object indicates that the number of errored seconds exceeds a specified threshold.
hwE1EstcaAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.64
This object indicates that the number of errored seconds falls below a specified threshold.
hwE1LmfaAlarm
.1.3.6.1.4.1.2011.5.25.157.2.67
This object indicates an LOM alarm on the framed E1.
hwE1LmfaAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.68
This object indicates that the LOM alarm on the framed E1 is cleared.
hwE1UpE1AisAlarm
.1.3.6.1.4.1.2011.5.25.157.2.69
This object indicates that an upstream alarm indication signal is generated on an E1 interface.
hwCesPwOppositeRai
.1.3.6.1.4.1.2011.5.25.157.2.7
Indicates the alarm is detected.
hwE1UpE1AisAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.70
This object indicates that the upstream alarm indication signal generated on an E1 interface is cleared.
hwE1AlmE1RaiAlarm
.1.3.6.1.4.1.2011.5.25.157.2.71
This object indicates that a remote alarm indication (RAI) signal is generated on an E1 link.
hwE1AlmE1RaiAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.72
This object indicates that the RAI signal generated on an E1 link is cleared.
hwCesPwOppositeAcFault
.1.3.6.1.4.1.2011.5.25.157.2.73
This object indicates that an alarm is generated when the attachment circuit on the peer device goes faulty.
hwCesPwOppositeAcFaultResume
.1.3.6.1.4.1.2011.5.25.157.2.74
This object indicates that a clear alarm is generated when the attachment circuit fault on the peer device is rectified.
hwCesLosPktExcAlarm
.1.3.6.1.4.1.2011.5.25.157.2.75
Indicates the alarm is detected.
hwCesLosPktExcAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.76
Indicates the alarm is cleared.
hwCesMisorderPktExcAlarm
.1.3.6.1.4.1.2011.5.25.157.2.77
Indicates the alarm is detected.
hwCesMisorderPktExcAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.78
Indicates the alarm is cleared.
hwCesStrayPktExcAlarm
.1.3.6.1.4.1.2011.5.25.157.2.79
Indicates the alarm is detected.
hwCesPwOppositeRaiResume
.1.3.6.1.4.1.2011.5.25.157.2.8
Indicates the alarm is cleared.
hwCesStrayPktExcAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.80
Indicates the alarm is cleared.
hwCesMalPktExcAlarm
.1.3.6.1.4.1.2011.5.25.157.2.81
Indicates the alarm is detected.
hwCesMalPktExcAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.82
Indicates the alarm is cleared.
hwCesJtrUdrExcAlarm
.1.3.6.1.4.1.2011.5.25.157.2.83
Indicates the alarm is detected.
hwCesJtrUdrExcAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.84
Indicates the alarm is cleared.
hwCesJtrOvrExcAlarm
.1.3.6.1.4.1.2011.5.25.157.2.85
Indicates the alarm is detected.
hwCesJtrOvrExcAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.86
Indicates the alarm is cleared.
hwRroolAlarm
.1.3.6.1.4.1.2011.5.25.157.2.87
This object indicates that an alarm is generated when there is no clock on the receive line.
hwRroolAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.88
This object indicates that a clear alarm is generated when there is a clock on the receive line.
hwVrfiAlarm
.1.3.6.1.4.1.2011.5.25.157.2.89
This object indicates that an alarm is generated when a lower order path (LP) remote failure indication (RFI) signal is detected.
hwLosAlarm
.1.3.6.1.4.1.2011.5.25.157.2.9
This object indicates that an alarm is generated due to signal loss at the receive end.
hwVrfiAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.90
This object indicates that a clear alarm is generated when the lower order path (LP) remote failure indication (RFI) signal is cleared.
hwV5VcaisAlarm
.1.3.6.1.4.1.2011.5.25.157.2.91
This object indicates that an alarm indication signal is generated in the virtual container.
hwV5VcaisAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.92
This object indicates that the alarm indication signal generated in the virtual container is cleared.
hwCposE1AlmE1RaiAlarm
.1.3.6.1.4.1.2011.5.25.157.2.95
This object indicates that an RAI signal is generated on an E1 link channelized from VC12.
hwCposE1AlmE1RaiAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.96
This object indicates that the RAI signal generated on an E1 link channelized from VC12 is cleared.
hwCposE1LfaAlarm
.1.3.6.1.4.1.2011.5.25.157.2.97
This object indicates that an out of frame (OOF) alarm is generated on the framed E1 channelized from VC12.
hwCposE1LfaAlarmResume
.1.3.6.1.4.1.2011.5.25.157.2.98
This object indicates that the OOF alarm generated on the framed E1 channelized from VC12 is cleared.
hwCposE1UpE1AisAlarm
.1.3.6.1.4.1.2011.5.25.157.2.99
This object indicates that an upstream alarm indication signal is generated on an E1 link channelized from VC12.
hwPortMIB 
hwEthernetTable 
hwEthernetEntry 
hwEthernetIfIndex 
hwSubIfSpecNum 
hwPortACRMasterPWChange