 hwPoeDimmError
| .1.3.6.1.4.1.2011.5.25.195.40.1 | This object indicates the Dimm chip error. |
hwPoePdClassInvalid
| .1.3.6.1.4.1.2011.5.25.195.40.10 | This object indicates that a PD of an invalid class is detected. |
hwPoePdClassOvercurrent
| .1.3.6.1.4.1.2011.5.25.195.40.11 | This object indicates that overcurrent occurs during the classification of a PD. |
hwPoePdPowerOvercurrent
| .1.3.6.1.4.1.2011.5.25.195.40.12 | This object indicates that overcurrent occurs during the powering of a PD. |
hwPoePdPowerOvercurrentResume
| .1.3.6.1.4.1.2011.5.25.195.40.13 | This object indicates that overcurrent is rectified. |
hwPoePowerOnFail
| .1.3.6.1.4.1.2011.5.25.195.40.14 | This object indicates that a PD fails to be powered on. |
hwPoePowerOffCurrentLimits
| .1.3.6.1.4.1.2011.5.25.195.40.15 | This object indicates that a PD is powered off because its current meets or exceeds the limit of current. |
hwPoePdPriorityDifferent
| .1.3.6.1.4.1.2011.5.25.195.40.16 | This object indicates that the priority of PD is different from the port. |
hwPoePowerOverUtilizationThreshold
| .1.3.6.1.4.1.2011.5.25.195.40.17 | This object indicates that the PSE is overdrawing power. |
hwPoePowerOverUtilizationThresholdResume
| .1.3.6.1.4.1.2011.5.25.195.40.18 | This object indicates that the PSE is not overdrawing power. |
hwPoeBoardInsertedWrongFrame
| .1.3.6.1.4.1.2011.5.25.195.40.19 | This object indicates that the poe board is inserted in the frame does not support poe. |
hwPoePowerOff
| .1.3.6.1.4.1.2011.5.25.195.40.2 | This object indicates a PD connected to an interface is powered off. |
hwPoePowerAbsent
| .1.3.6.1.4.1.2011.5.25.195.40.20 | This object indicates that the poe power is absent. |
hwPoePowerAbsentResume
| .1.3.6.1.4.1.2011.5.25.195.40.21 | This object indicates that the poe power is present. |
hwPoeRpsPowerOutputAlarm
| .1.3.6.1.4.1.2011.5.25.195.40.22 | This object indicates that the RPS power can not provide POE power for this device. |
hwPoeRpsPowerOutputAlarmResume
| .1.3.6.1.4.1.2011.5.25.195.40.23 | This object indicates that the RPS power can provide POE power for this device. |
hwPoeControlChipFail
| .1.3.6.1.4.1.2011.5.25.195.40.24 | This object indicates that the poe control chip is failed. |
hwPoeControlChipFailResume
| .1.3.6.1.4.1.2011.5.25.195.40.25 | This object indicates that the poe control chip has resumed. |
| hwPoePSEPowerCut | .1.3.6.1.4.1.2011.5.25.195.40.26 | This object indicates that the poe pse power is not enough. |
| hwPoePSEPowerCutResume | .1.3.6.1.4.1.2011.5.25.195.40.27 | This object indicates that the poe pse power cut has resumed. |
hwPoeSlotPowerCut
| .1.3.6.1.4.1.2011.5.25.195.40.28 | This object indicates that the poe slot power is not enough. |
hwPoeSlotPowerCutResume
| .1.3.6.1.4.1.2011.5.25.195.40.29 | This object indicates that the poe slot power cut has resumed. |
hwPoePowerOn
| .1.3.6.1.4.1.2011.5.25.195.40.3 | This object indicates that a PD connected to an interface is powered on. |
hwPoeNotAvailable
| .1.3.6.1.4.1.2011.5.25.195.40.30 | PoE function is not available. |
hwPoeNotAvailableResume
| .1.3.6.1.4.1.2011.5.25.195.40.31 | PoE function is available. |
hwPoeCardAbsent
| .1.3.6.1.4.1.2011.5.25.195.40.32 | This object indicates that the poe card is absent. |
hwPoePortFail
| .1.3.6.1.4.1.2011.5.25.195.40.33 | This object indicates that the poe port is abnormal. |
hwPoePortFailResume
| .1.3.6.1.4.1.2011.5.25.195.40.34 | This object indicates that the poe port has recoverd. |
hwPdPowerCut
| .1.3.6.1.4.1.2011.5.25.195.40.35 | PoE power is not enough. |
hwPdPowerCutResume
| .1.3.6.1.4.1.2011.5.25.195.40.36 | PoE power is enough. |
hwPoeChipFail
| .1.3.6.1.4.1.2011.5.25.195.40.37 | This object indicates that the poe chip is failed. |
hwPoeChipFailResume
| .1.3.6.1.4.1.2011.5.25.195.40.38 | This object indicates that the poe chip has resumed. |
hwPdVltLow
| .1.3.6.1.4.1.2011.5.25.195.40.39 | PD voltage is lower. |
hwPoeSlotPowerOverload
| .1.3.6.1.4.1.2011.5.25.195.40.4 | This object indicates that the power consumed by a slot exceeds the threshold. |
hwPdVltLowResume
| .1.3.6.1.4.1.2011.5.25.195.40.40 | PD voltage becomes normal from lower. |
hwPdVltHigh
| .1.3.6.1.4.1.2011.5.25.195.40.41 | PD voltage is high. |
hwPdVltHighResume
| .1.3.6.1.4.1.2011.5.25.195.40.42 | PD voltage becomes normal from high. |
hwPseVltLow
| .1.3.6.1.4.1.2011.5.25.195.40.43 | PSE voltage is lower. |
hwPseVltLowResume
| .1.3.6.1.4.1.2011.5.25.195.40.44 | PSE voltage becomes normal from lower. |
hwPoePdOvercurrentPoweroff
| .1.3.6.1.4.1.2011.5.25.195.40.45 | This object indicates that the PD is power off due to overcurrent. |
hwPoePdOverloadPoweroff
| .1.3.6.1.4.1.2011.5.25.195.40.46 | This object indicates that the PD is power off due to overload. |
hwPoeSubCardAbsent
| .1.3.6.1.4.1.2011.5.25.195.40.47 | This object indicates that the poe subcard is absent. |
hwPoeSubCardAbsentResume
| .1.3.6.1.4.1.2011.5.25.195.40.48 | This object indicates that the poe subcard is re-installed. |
hwPoeCommunicateFail
| .1.3.6.1.4.1.2011.5.25.195.40.49 | This object indicates that the poe communication fails. |
hwPoeSlotPowerOverloadResume
| .1.3.6.1.4.1.2011.5.25.195.40.5 | This object indicates that the power consumed by a slot does not exceed the threshold. |
hwPoeCommunicateFailResume
| .1.3.6.1.4.1.2011.5.25.195.40.50 | This object indicates that the poe communication has resumed. |
hwPoePdPowerOverload
| .1.3.6.1.4.1.2011.5.25.195.40.6 | This object indicates the power consumed by a PD connected to an interface exceeds the threshold. |
hwPoePdPowerOverloadResume
| .1.3.6.1.4.1.2011.5.25.195.40.7 | This object indicates that the power consumed by a PD connected to an interface does not exceed the threshold. |
hwPoePdConnected
| .1.3.6.1.4.1.2011.5.25.195.40.8 | This object indicates that a PD is connected to an interface. |
hwPoePdDisconnected
| .1.3.6.1.4.1.2011.5.25.195.40.9 | This object indicates that a PD is disconnected from an interface. |
hwPoeMIB 
hwPoePower 
hwPoeSlotTable 
hwPoeSlotEntry 
hwPoeSlotId