Standard view Table view

HUAWEI-PCE-MIB

        This MIB contains private managed object and notification trap 
definitions for PCE.

Source file: HUAWEI-PCE-MIB
Last revised: 4 Mar 2017, 10:00 UTC
Identity: hwPceMib
Base OID: 1.3.6.1.4.1.2011.5.25.322

Imported Objects

HUAWEI-MIB	hwDatacomm
IF-MIB	ifIndex ifName InterfaceIndex
INET-ADDRESS-MIB	InetAddress InetAddressType
PCE-PCEP-MIB	pcePcepSessState
SNMP-FRAMEWORK-MIB	SnmpAdminString
SNMPv2-CONF	MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI	BITS (no object page) Counter32 Integer32 IpAddress MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32

Net-SNMP examples using the huawei MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity

/usr/bin/snmptranslate -Pud -Ir -On -m 'HUAWEI-PCE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HUAWEI-PCE-MIB::hwPceMib'

Walk the MIB subtree

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-PCE-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-PCE-MIB::hwPceMib'

How SNMP, Net-SNMP, MIB paths, and variants work

Objects (27)

hwPceMib		`.1.3.6.1.4.1.2011.5.25.322`
hwPceObject		`.1.3.6.1.4.1.2011.5.25.322.1`
hwPceLspPathChangeReason	Enumeration	`.1.3.6.1.4.1.2011.5.25.322.1.1`
hwPceAdjacencySID	Unsigned32	`.1.3.6.1.4.1.2011.5.25.322.1.10`
hwPceAdjSIDTransactionNum	Unsigned32	`.1.3.6.1.4.1.2011.5.25.322.1.11`
hwPceTPStatusPortStatus	Enumeration	`.1.3.6.1.4.1.2011.5.25.322.1.12`
hwPceTPStatusNodeType	Enumeration	`.1.3.6.1.4.1.2011.5.25.322.1.13`
hwPceTPStatusNodeId	OctetString	`.1.3.6.1.4.1.2011.5.25.322.1.14`
hwPceTPStatusTPKeyType	Enumeration	`.1.3.6.1.4.1.2011.5.25.322.1.15`
hwPceTPStatusTPKeyId	OctetString	`.1.3.6.1.4.1.2011.5.25.322.1.16`
hwPceLspPathChangeTransNumber	Unsigned32	`.1.3.6.1.4.1.2011.5.25.322.1.17`
hwPceWaitHaDataSmoothExpireTime	Unsigned32	`.1.3.6.1.4.1.2011.5.25.322.1.18`
hwPceUserHandle	OctetString	`.1.3.6.1.4.1.2011.5.25.322.1.19`
hwPceDelegateStateChangeReason	Enumeration	`.1.3.6.1.4.1.2011.5.25.322.1.2`
hwPceDelegateLspThresholdCount	Unsigned32	`.1.3.6.1.4.1.2011.5.25.322.1.20`
hwPceDelegateLspLimitCount	Unsigned32	`.1.3.6.1.4.1.2011.5.25.322.1.21`
hwPceLspPathChangeSN	Integer32	`.1.3.6.1.4.1.2011.5.25.322.1.3`
hwPceLspPathChangeResultInfo	Enumeration	`.1.3.6.1.4.1.2011.5.25.322.1.4`
hwPceAdjacencyLocalNodeId	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.2011.5.25.322.1.5`
hwPceAdjacencyLocalTpId	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.2011.5.25.322.1.6`
hwPceAdjacencyRemoteNodeId	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.2011.5.25.322.1.7`
hwPceAdjacencyRemoteTpId	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.2011.5.25.322.1.8`
hwPceAdjacencySIDOper	Enumeration	`.1.3.6.1.4.1.2011.5.25.322.1.9`
hwPceTraps		`.1.3.6.1.4.1.2011.5.25.322.2`
hwPceTrapConformance		`.1.3.6.1.4.1.2011.5.25.322.3`
hwPceTrapCompliances		`.1.3.6.1.4.1.2011.5.25.322.3.1`
hwPceTrapGroups		`.1.3.6.1.4.1.2011.5.25.322.3.2`

Dependencies (10) 7 direct · 3 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree

HUAWEI-PCE-MIBhuaweiselected
- HUAWEI-MIBhuawei1 symbol
  - SNMPv2-SMIrfcdefault fallback2 symbols
- IF-MIBrfcdefault fallback3 symbols
  - IANAifType-MIBrfc1 symbol
    - SNMPv2-SMIrfcshared2 symbols
    - SNMPv2-TCrfc1 symbol
      - SNMPv2-SMIrfcshared1 symbol
  - SNMPv2-CONFrfc3 symbols
    - SNMPv2-SMIrfcshared3 symbols
  - SNMPv2-MIBrfc1 symbol
    - SNMPv2-CONFrfcshared3 symbols
    - SNMPv2-SMIrfcshared7 symbols
    - SNMPv2-TCrfcshared3 symbols
  - SNMPv2-SMIrfcshared9 symbols
  - SNMPv2-TCrfcshared8 symbols
- INET-ADDRESS-MIBrfcdefault fallback2 symbols
  - SNMPv2-SMIrfcshared3 symbols
  - SNMPv2-TCrfcshared1 symbol
- PCE-PCEP-MIBrfcdefault fallback1 symbol
  - INET-ADDRESS-MIBrfcshared2 symbols
  - SNMPv2-CONFrfcshared3 symbols
  - SNMPv2-SMIrfcshared6 symbols
  - SNMPv2-TCrfcshared2 symbols
- SNMP-FRAMEWORK-MIBrfcdefault fallback1 symbol
  - SNMPv2-CONFrfcshared2 symbols
  - SNMPv2-SMIrfcshared4 symbols
  - SNMPv2-TCrfcshared1 symbol
- SNMPv2-CONFrfcdefault fallbackshared3 symbols
- SNMPv2-SMIrfcdefault fallbackshared8 symbols

Dependency-first compile order

Conformance Groups (2)

hwPceObjectGroup	hwPceLspPathChangeReason hwPceDelegateStateChangeReason hwPceLspPathChangeSN hwPceLspPathChangeResultInfo hwPceAdjacencyLocalNodeId hwPceAdjacencyLocalTpId hwPceAdjacencyRemoteNodeId hwPceAdjacencyRemoteTpId hwPceAdjacencySIDOper hwPceAdjacencySID hwPceAdjSIDTransactionNum hwPceTPStatusPortStatus hwPceTPStatusNodeType hwPceTPStatusNodeId hwPceTPStatusTPKeyType hwPceTPStatusTPKeyId hwPceLspPathChangeTransNumber hwPceWaitHaDataSmoothExpireTime hwPceUserHandle hwPceDelegateLspThresholdCount hwPceDelegateLspLimitCount Group for base trap objects.	`.1.3.6.1.4.1.2011.5.25.322.3.2.1`
hwPceTrapGroup	hwPceLspPathChange hwPceDelegateStateChange hwPceLspPathChangeResult hwPceLspOutOfCtrl hwPceLspOutOfCtrlClear hwPceAdjacencySIDChange hwPceTerminalPointStatus hwPceServerSystemStart hwPceWaitHaDataSmoothExpire hwPceWaitHaDataSmoothExpireClear hwPceUnKnownSessionReceived hwPceUnKnownSessionReceivedClear hwPceSessionHasNoDelegatedLsp hwPceSessionHasNoDelegatedLspClear hwPceDelgLspReachThreshold hwPceDelgLspReachThresholdClear hwPceDelgateResLimitExceed hwPceDelgateResLimitExceedClear Group for all base traps.	`.1.3.6.1.4.1.2011.5.25.322.3.2.2`

Compliance Statements (1)

OID .1.3.6.1.4.1.2011.5.25.322.3.1.1

Compliance statement for agents that provide full support for hwBaseTrapMIB.

Required groups

mandatory	hwPceObjectGroup

Notifications / Traps (18)

Name	OID	Description
hwPceLspPathChange hwPceLspPathChangeReason hwPceLspPathChangeTransNumber hwPceUserHandle	`.1.3.6.1.4.1.2011.5.25.322.2.1`	This notification indicates that LSP path's computation result change.
hwPceWaitHaDataSmoothExpireClear	`.1.3.6.1.4.1.2011.5.25.322.2.10`	This notification indicates that PCE erver has received ha batch message.
hwPceUnKnownSessionReceived PCE-PCEP-MIBpcePcepSessState	`.1.3.6.1.4.1.2011.5.25.322.2.11`	This notification indicates that PCE server received request from unknown client.
hwPceUnKnownSessionReceivedClear PCE-PCEP-MIBpcePcepSessState	`.1.3.6.1.4.1.2011.5.25.322.2.12`	This notification indicates that PCEP session has confirmed.
hwPceSessionHasNoDelegatedLsp PCE-PCEP-MIBpcePcepSessState	`.1.3.6.1.4.1.2011.5.25.322.2.13`	This notification indicates that PCEP session has non delegete LSP.
hwPceSessionHasNoDelegatedLspClear PCE-PCEP-MIBpcePcepSessState	`.1.3.6.1.4.1.2011.5.25.322.2.14`	This notification indicates that PCEP session receive delegated LSP.
hwPceDelgLspReachThreshold hwPceDelegateLspThresholdCount hwPceDelegateLspLimitCount	`.1.3.6.1.4.1.2011.5.25.322.2.15`	This notification indicates that the number of delegated LSP count reached threshold limit.
hwPceDelgLspReachThresholdClear hwPceDelegateLspThresholdCount hwPceDelegateLspLimitCount	`.1.3.6.1.4.1.2011.5.25.322.2.16`	This notification indicates that the number of delegated LSP count falls under threshold limit.
hwPceDelgateResLimitExceed	`.1.3.6.1.4.1.2011.5.25.322.2.17`	This notification indicates that PCE server is entering resource limit exceeded state.
hwPceDelgateResLimitExceedClear	`.1.3.6.1.4.1.2011.5.25.322.2.18`	This notification indicates that PCE server is exiting resource limit exceeded state.
hwPceDelegateStateChange hwPceDelegateStateChangeReason	`.1.3.6.1.4.1.2011.5.25.322.2.2`	This notification indicates that delegate LSP State change.
hwPceLspPathChangeResult hwPceLspPathChangeSN hwPceLspPathChangeResultInfo hwPceUserHandle	`.1.3.6.1.4.1.2011.5.25.322.2.3`	This notification indicates current Path changed LSP Batch ID information.
hwPceLspOutOfCtrl	`.1.3.6.1.4.1.2011.5.25.322.2.4`	This notification indicates that some PCE LSP is out of control.
hwPceLspOutOfCtrlClear	`.1.3.6.1.4.1.2011.5.25.322.2.5`	This notification indicates that no more PCE LSP is out of control.
hwPceAdjacencySIDChange hwPceAdjSIDTransactionNum hwPceAdjacencyLocalNodeId hwPceAdjacencyLocalTpId hwPceAdjacencyRemoteNodeId hwPceAdjacencyRemoteTpId hwPceAdjacencySIDOper hwPceAdjacencySID	`.1.3.6.1.4.1.2011.5.25.322.2.6`	This notification indicates the adjency SID change.
hwPceTerminalPointStatus hwPceTPStatusNodeType hwPceTPStatusNodeId hwPceTPStatusTPKeyType hwPceTPStatusTPKeyId hwPceTPStatusPortStatus	`.1.3.6.1.4.1.2011.5.25.322.2.7`	This notification indicates the terminal point status.
hwPceServerSystemStart	`.1.3.6.1.4.1.2011.5.25.322.2.8`	This notification indicates that PCE server system is started and waiting for role type.
hwPceWaitHaDataSmoothExpire hwPceWaitHaDataSmoothExpireTime	`.1.3.6.1.4.1.2011.5.25.322.2.9`	This notification indicates that PCE server wait ha batch update message expired.