HUAWEI-NVO3-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
8
Rows
8
Columns
37
hwNvo3NveTable
table.1.3.6.1.4.1.2011.5.25.335.1.1
·
1 row entry
·
2 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwNvo3NveTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NVO3-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NVO3-MIB::hwNvo3NveTable'
The Nvo3 nve table providing read/modify operations. The Nve entry is created and deleted associate with the nve type interface, you need to create the nve type interface first, then you can get the nve entry and modify it's attribute.
The entry of hwNvo3NveTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
IfIndex of the nve type interface, the key of the nve entry.
|
IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … |
.1.3.6.1.4.1.2011.5.25.335.1.1.1.1 |
|
The nve source address which is used as vxlan tunnel end point address
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.2011.5.25.335.1.1.1.2 |
hwNvo3NveVniPeerTable
table.1.3.6.1.4.1.2011.5.25.335.1.2
·
1 row entry
·
3 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwNvo3NveVniPeerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NVO3-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NVO3-MIB::hwNvo3NveVniPeerTable'
The Nvo3 vni peer table providing create/modify/delete operations. Vxlan use this table to send broadcast, multicast, and unknown unicast flood frames.
The entry of hwNvo3NveVniPeerTable.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The vni that to be specified a remote nve peer address.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.335.1.2.1.1 |
||||||||||||
|
The vni remote nve peer address.
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.2011.5.25.335.1.2.1.2 |
||||||||||||
|
The row status.
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.2011.5.25.335.1.2.1.3 |
hwNvo3VxlanTnlTable
table.1.3.6.1.4.1.2011.5.25.335.1.3
·
1 row entry
·
3 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwNvo3VxlanTnlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NVO3-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NVO3-MIB::hwNvo3VxlanTnlTable'
The Nvo3 vxlan tunnel table, providing read operations.
The entry of hwNvo3VxlanTnlTable.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
The vxlan tunnel source address.
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.2011.5.25.335.1.3.1.1 |
||||
|
The vxlan tunnel destination address.
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.2011.5.25.335.1.3.1.2 |
||||
|
The vxlan tunnel status.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.335.1.3.1.3 |
hwNvo3VxlanIPv6TnlTable
table.1.3.6.1.4.1.2011.5.25.335.1.4
·
1 row entry
·
3 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwNvo3VxlanIPv6TnlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NVO3-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NVO3-MIB::hwNvo3VxlanIPv6TnlTable'
The Nvo3 vxlan IPv6 tunnel table, providing read operations.
The entry of hwNvo3VxlanTnlTable.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
The vxlan tunnel source address
|
IPV6-TCIpv6Address Type Constraints: range: 16 |
.1.3.6.1.4.1.2011.5.25.335.1.4.1.1 |
||||
|
The vxlan tunnel destination address
|
IPV6-TCIpv6Address Type Constraints: range: 16 |
.1.3.6.1.4.1.2011.5.25.335.1.4.1.2 |
||||
|
The vxlan tunnel status
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.335.1.4.1.3 |
hwNvo3VniStatsTable
table.1.3.6.1.4.1.2011.5.25.335.1.5
·
1 row entry
·
3 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwNvo3VniStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NVO3-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NVO3-MIB::hwNvo3VniStatsTable'
The Nvo3 vni stats table providing traffic statistics about the VNI.
The entry of hwNvo3VniStatsTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
The vni that to be specified a remote nve peer address.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.335.1.5.1.1 |
|
The rate of recieved bits per second about vni.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.335.1.5.1.2 |
|
The rate of sent bits per second about vni.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.335.1.5.1.3 |
hwVxlanIpPathDetectTable
table.1.3.6.1.4.1.2011.5.25.335.1.6
·
1 row entry
·
13 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwVxlanIpPathDetectTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NVO3-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NVO3-MIB::hwVxlanIpPathDetectTable'
Description: This table describes result information of a path detect test instance.
The entry of hwVxlanIpPathDetectTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
The test index.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.335.1.6.1.1 |
||||
|
The source address of test packet.
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.2011.5.25.335.1.6.1.2 |
||||
|
The destination address of test packet.
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.2011.5.25.335.1.6.1.3 |
||||
|
The source address of test packet.
|
IPV6-TCIpv6Address Type Constraints: range: 16 |
.1.3.6.1.4.1.2011.5.25.335.1.6.1.4 |
||||
|
The destination address of test packet.
|
IPV6-TCIpv6Address Type Constraints: range: 16 |
.1.3.6.1.4.1.2011.5.25.335.1.6.1.5 |
||||
|
The Protocol of test packet.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.335.1.6.1.6 |
||||
|
The source port of test packet.
|
Unsigned32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.2011.5.25.335.1.6.1.7 |
||||
|
The destination port of test packet.
|
Unsigned32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.2011.5.25.335.1.6.1.8 |
||||
|
The ip packet dscp.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.335.1.6.1.9 |
||||
|
Specifies the VRF (VPN Routing & Forwarding) instances name of tests.
|
OctetString Constraints: range: 1-31 |
.1.3.6.1.4.1.2011.5.25.335.1.6.1.10 |
||||
|
This object indicates the name of interface of the test packet through.
|
OctetString | .1.3.6.1.4.1.2011.5.25.335.1.6.1.11 |
||||
|
The direction of the test packet through. When the packet from the ingress, hwVxlanPathDetectDirection is 1; when the packet from the egress, hwVxlanPathDetectDirection is 2.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.335.1.6.1.12 |
||||
|
The ip packet TTL.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.335.1.6.1.13 |
.1.3.6.1.4.1.2011.5.25.335.4.1
·
1 row entry
·
7 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwVxlanTunnelStatisticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NVO3-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NVO3-MIB::hwVxlanTunnelStatisticTable'
A table of vxlan statistic display information.
vxlan statistic display Entry.
| Column | Syntax | OID |
|---|---|---|
|
Peer Ip.
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.2011.5.25.335.4.1.1.1 |
|
Source Ip of vxlan tunnel.
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.2011.5.25.335.4.1.1.2 |
|
VRF index.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.335.4.1.1.3 |
|
Received packets of vxlan tunnel.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.335.4.1.1.4 |
|
Received bytes of vxlan tunnel.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.335.4.1.1.5 |
|
Transmitted packets of vxlan tunnel.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.335.4.1.1.6 |
|
Transmitted bytes of vxlan tunnel.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.335.4.1.1.7 |
hwEvplCccTable
table.1.3.6.1.4.1.2011.5.25.335.9.1
·
1 row entry
·
3 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk hwEvplCccTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NVO3-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NVO3-MIB::hwEvplCccTable'
The evpl ccc table, providing read operations.
The entry of hwEvplCccTable.
| Column | Syntax | OID |
|---|---|---|
|
The evpl instance index.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.335.9.1.1.1 |
|
The name of the interface1.
|
IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … |
.1.3.6.1.4.1.2011.5.25.335.9.1.1.2 |
|
The name of the interface2.
|
IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … |
.1.3.6.1.4.1.2011.5.25.335.9.1.1.3 |