HUAWEI-NTDM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
60

hwNativeTDMIfTable

table
.1.3.6.1.4.1.2011.5.105.1.1 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwNativeTDMIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTDM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTDM-MIB::hwNativeTDMIfTable' 
Configuration table of Native TDM interface, such as the TDM interface loopback type,
line status and alarm status.
The index of this table is ifIndex.
hwNativeTDMIfEntry row .1.3.6.1.4.1.2011.5.105.1.1.1
Configuration table of Native TDM interface, such as the TDM interface loopback type,
line status and alarm status.
The index of this entry is ifIndex.
Indexes
Column Syntax OID
hwNativeTDMIfLoopbackConfig
Loopback type of the TDM interface.
Options:
1. dsx1NoLoop(1) -NoLoop
2. dsx1RemoteLoop(2) -RemoteLoop
3. dsx1DigitalLoop(3) -DigitalLoop
4. dsx1AnalogLoop(4) -AnalogLoop
5. invalid(-1) -invalid value…
Enumerationr/w
Enumerated Values:
-1invalid
1dsx1NoLoop
2dsx1RemoteLoop
3dsx1DigitalLoop
4dsx1AnalogLoop
 .1.3.6.1.4.1.2011.5.105.1.1.1.1
hwNativeTDMIfLineStatus
Line status of the TDM interface.
Options:
1. dsx1Normal(1) -Line is normal
2. dsx1Fault(2) -Line is fault
3. invalid(-1) -invalid value
Enumeration
Enumerated Values:
-1invalid
1dsx1Normal
2dsx1Fault
 .1.3.6.1.4.1.2011.5.105.1.1.1.2
hwNativeTDMIfLineAlarm
Alarm status of the TDM interface.
Options:
1. dsx1NoAlarm(0) -NoAlarm
2. dsx1LOS(1) -signal is lost
3. dsx1AIS(2) -alarm indicate signal value
Bits
Enumerated Values:
0dsx1NoAlarm
1dsx1LOS
2dsx1AIS
 .1.3.6.1.4.1.2011.5.105.1.1.1.3

hwNativeTDMBoardTable

table
.1.3.6.1.4.1.2011.5.105.1.2 · 1 row entry · 7 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwNativeTDMBoardTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTDM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTDM-MIB::hwNativeTDMBoardTable' 
This table is used for setting configuration of Native TDM board, such as line coding format,
impedance and remote inner loopback.
The indexes of this table are hwNativeTDMFrameIndex and hwNativeTDMSlotIndex.
hwNativeTDMBoardEntry row .1.3.6.1.4.1.2011.5.105.1.2.1
This table is used for setting configuration of Native TDM board, such as line coding format,
impedance and remote inner loopback.
The indexes of this entry are hwNativeTDMFrameIndex and hwNativeTDMSlotIndex.
Indexes
Column Syntax OID
hwNativeTDMFrameIndex
Frame ID of the TDM board.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.105.1.2.1.1
hwNativeTDMSlotIndex
Slot ID of the TDM board.
Integer32
Constraints:
range: 0-22
 .1.3.6.1.4.1.2011.5.105.1.2.1.2
hwNativeTDMIfLineCoding
Line coding format of the TDM interfaces in the board.
Options:
1. dsx1AMI(1) -AMI
2. dsx1HDB3(2) -HDB3
3. invalid(-1) -invalid value
Default: dsx1HDB3(2)
Enumerationr/w
Enumerated Values:
-1invalid
1dsx1AMI
2dsx1HDB3
 .1.3.6.1.4.1.2011.5.105.1.2.1.3
hwNativeTDMIfImpedance
Impedance of the TDM interfaces in the board.
Options:
1. dsx1Impedance75(1) -75
2. dsx1Impedance120(2) -120
3. dsx1Impedance100(3) -100
4. invalid(-1) -invalid value
Default: dsx1Impedance75(1)
Enumerationr/w
Enumerated Values:
-1invalid
1dsx1Impedance75
2dsx1Impedance120
3dsx1Impedance100
 .1.3.6.1.4.1.2011.5.105.1.2.1.4
hwNativeTDMIfLoopback
Loopback of the TDM interfaces in the board.
Options:
1. dsx1NoLoop(1) -no loopback
2. dsx1RemoteInner(2) -remote inner loopback
Default: dsx1NoLoop(1)
Enumerationr/w
Enumerated Values:
1dsx1NoLoop
2dsx1RemoteInner
 .1.3.6.1.4.1.2011.5.105.1.2.1.5
hwTDMCfgAccessMode
Access mode of the TDM interfaces board.
Options:
1. e1(1) -e1 access mode
2. t1(2) -t1 access mode
3. invalid(-1) -invalid value
Enumerationr/w
Enumerated Values:
-1invalid
1e1
2t1
 .1.3.6.1.4.1.2011.5.105.1.2.1.6
hwTDMJitterBuffer
Set jitterbuffer of the TDM interfaces board.This operation will reboot the board.
Setting jitterbuffer has great impact on the service,Increasing the value of jitterbuffer can reduce the probability of
underflow,but …
Enumerationr/w
Enumerated Values:
-1invalid
1jitterbuffer375
2jitterbuffer500
3jitterbuffer625
4jitterbuffer750
5jitterbuffer875
6jitterbuffer1000
7jitterbuffer1125
8jitterbuffer1250
9jitterbuffer1375
10jitterbuffer1500
11jitterbuffer1625
12jitterbuffer1750
13jitterbuffer1875
14jitterbuffer2000
15jitterbuffer4000
16jitterbuffer8000
 .1.3.6.1.4.1.2011.5.105.1.2.1.7

hwNativeTDMFlowTable

table
.1.3.6.1.4.1.2011.5.105.1.3 · 1 row entry · 12 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwNativeTDMFlowTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTDM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTDM-MIB::hwNativeTDMFlowTable' 
This table is used for setting configuration of the Native TDM flow, such as
source interface index, source parameter.
The index of this table is hwNativeTDMFlowID.
hwNativeTDMFlowEntry row .1.3.6.1.4.1.2011.5.105.1.3.1
This table is used for setting configuration of the Native TDM flow, such as
source interface index, source parameter.
The index of this entry is hwNativeTDMFlowID.
Indexes
Column Syntax OID
hwNativeTDMFlowID
Unique identifier of the Native TDM flow in the system.
Integer32r/w
Constraints:
range: -1-2047
 .1.3.6.1.4.1.2011.5.105.1.3.1.1
hwNativeTDMSrcIfIndex
Source interface index, in current application the source interface index is the index
of the GPON interface.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.105.1.3.1.2
hwNativeTDMSrcPara
Source parameter, in current application the source parameter is the corresponding
GEM Port-ID of the Native TDM service.
Integer32r/w
Constraints:
range: -1--1
range: 128-3999
 .1.3.6.1.4.1.2011.5.105.1.3.1.3
hwNativeTDMDstIfIndex
Destination interface index, in current application the destination interface index
is the index of the E1 port.
In the case of the connection of pwe3-uplink, ifIndex are generated by frame/slot/0xff.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.105.1.3.1.4
hwNativeTDMDstPara
Destination parameter, used for future expansibility.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.105.1.3.1.5
hwNativeTDMAdminStatus
Administration status, used for future expansibility.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.105.1.3.1.6
hwNativeTDMOperStatus
Operation status, used for future expansibility.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.105.1.3.1.7
hwNativeTDMRowStatus
The present operation status of the row.
Options:
1. createAndGo(4) -The present operation status is createAndGo
2. destroy(6) -The present operation status is destroy
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.105.1.3.1.8
hwNativeTDMSrcPara1
Source parameter, in current application the source parameter is the corresponding
ONT-ID of the Native TDM service.
Integer32r/w
Constraints:
range: -1-127
 .1.3.6.1.4.1.2011.5.105.1.3.1.9
hwNativeTDMSrcPara2
Source parameter, in current application the source parameter is the corresponding
Gemport-Index of the Native TDM service.
Integer32r/w
Constraints:
range: -1-1023
 .1.3.6.1.4.1.2011.5.105.1.3.1.10
hwNativeTDMServicePortIndex
A unique identifier of the service virtual port.
The invalid value is -1.
Integer32r/w
Constraints:
range: -1--1
range: 1-131072
 .1.3.6.1.4.1.2011.5.105.1.3.1.11
hwNativeTDMOnuTDMVCL
Onu TDM VCL ID.
The invalid value is -1.
Integer32r/w
Constraints:
range: -1-31
 .1.3.6.1.4.1.2011.5.105.1.3.1.12

hwNativeTDMBoardClockSourceTable

table
.1.3.6.1.4.1.2011.5.105.1.4 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwNativeTDMBoardClockSourceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTDM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTDM-MIB::hwNativeTDMBoardClockSourceTable' 
Configuration table of clock source configured in Native TDM board.
The indexes of this table are hwNativeTDMFrameId, hwNativeTDMSlotId and hwNativeTDMClockSourceId.
hwNativeTDMBoardClockSourceEntry row .1.3.6.1.4.1.2011.5.105.1.4.1
Configuration table of clock source configured in Native TDM board.
The indexes of this entry are hwNativeTDMFrameId, hwNativeTDMSlotId and hwNativeTDMClockSourceId.
Indexes
Column Syntax OID
hwNativeTDMFrameId
Frame ID of the TDM board.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.105.1.4.1.1
hwNativeTDMSlotId
Slot ID of the TDM board.
Integer32
Constraints:
range: 0-22
 .1.3.6.1.4.1.2011.5.105.1.4.1.2
hwNativeTDMClockSourceId
Clock Source ID of the TDM board.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.105.1.4.1.3
hwNativeTDMPwId
PW or CESoP connectID of Clock Source on the TDM board.
Unsigned32r/w
Constraints:
range: 0-4294967294
 .1.3.6.1.4.1.2011.5.105.1.4.1.4
hwNativeTDMRowStat
The present operation status of the row.
Options:
1. createAndGo(4) -The present operation status of the row is createAndgo
2. destroy(6) -The present operation status of the row is destroy
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.105.1.4.1.5
hwNativeTDMClockSourceState
Type of clock mode.
Options:
1. normal(1) -the clock source state is normal
2. fail(2) -the clock source state is failed
3. invalid(-1) -invalid value
Enumeration
Enumerated Values:
-1invalid
1normal
2failed
 .1.3.6.1.4.1.2011.5.105.1.4.1.6

hwNativeTDMFlowClockModeTable

table
.1.3.6.1.4.1.2011.5.105.1.5 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwNativeTDMFlowClockModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTDM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTDM-MIB::hwNativeTDMFlowClockModeTable' 
Configuration table of the Native TDM flow clock mode.
The index of this table is hwNativeTDMFlowConnectID.
hwNativeTDMFlowClockModeEntry row .1.3.6.1.4.1.2011.5.105.1.5.1
Configuration table of the Native TDM flow clock mode.
The index of this entry is hwNativeTDMFlowConnectID.
Indexes
Column Syntax OID
hwNativeTDMFlowConnectID
Unique identifier of the Native TDM flow in the system.
Integer32
Constraints:
range: 0-2047
 .1.3.6.1.4.1.2011.5.105.1.5.1.1
hwNativeTDMClockMode
Type of clock mode.
Options:
1. master(1) -master mode
2. slave(2) -slave mode
3. invalid(-1) -invalid value
Enumerationr/w
Enumerated Values:
-1invalid
1master
2slave
 .1.3.6.1.4.1.2011.5.105.1.5.1.2
hwNativeTDMClockSourceMode
Type of clock source mode.
Options:
1. retiming(1) -retiming mode
2. adapt(2) -adapt mode
3. invalid(-1) -invalid value
Enumerationr/w
Enumerated Values:
-1invalid
1retiming
2adapt
 .1.3.6.1.4.1.2011.5.105.1.5.1.3
hwNativeTDMClockSourceIndex
Type of recovery clock source index:
In current application the source index is 0.
The invalid value is -1.
Integer32r/w
Constraints:
range: -1-0
 .1.3.6.1.4.1.2011.5.105.1.5.1.4

hwNativeTDMConnectStatTable

table
.1.3.6.1.4.1.2011.5.105.1.6 · 1 row entry · 25 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwNativeTDMConnectStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTDM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTDM-MIB::hwNativeTDMConnectStatTable' 
Native TDM connect statistics table, such as received upstream Native TDM packets.
The index of this table is hwNativeTDMConnectID.
hwNativeTDMConnectStatEntry row .1.3.6.1.4.1.2011.5.105.1.6.1
Native TDM connect statistics table, such as received upstream Native TDM packets.
The index of this entry is hwNativeTDMConnectID.
Indexes
Column Syntax OID
hwNativeTDMConnectID
Native TDM connect ID.
Integer32
Constraints:
range: 0-2047
 .1.3.6.1.4.1.2011.5.105.1.6.1.1
hwNativeTDMConnectRecvTdmPackets
Received upstream Native TDM packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.105.1.6.1.2
hwNativeTDMConnectSendTdmPackets
Transmitted downstream Native TDM packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.105.1.6.1.3
hwNativeTDMConnectRecvCesopPackets
Received downstream CESoP packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.105.1.6.1.4
hwNativeTDMConnectSendCesopPackets
Transmitted upstream CESoP packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.105.1.6.1.5
hwNativeTDMConnectRecvUpVc12Frames
Received upstream VC12 frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.105.1.6.1.6
hwNativeTDMConnectSendDownVc12Frames
Transmitted downstream VC12 frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.105.1.6.1.7
hwNativeTDMConnectDropUpstreamBufferOverflow
Discarded upstream Native TDM packets due to buffer overflow.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.105.1.6.1.8
hwNativeTDMConnectDropUpstreamBufferUnderflow
Discarded upstream Native TDM packets due to buffer underflow.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.105.1.6.1.9
hwNativeTDMConnectDropDownstreamBufferOverflow
Discarded downstream CESoP packets due to buffer overflow.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.105.1.6.1.10
hwNativeTDMConnectDropDownstreamBufferUnderflow
Discarded downstream CESoP packets due to buffer underflow.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.105.1.6.1.11
hwNativeTDMConnectDropDownstreamSnError
Discarded downstream CESoP packets due to SN error.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.105.1.6.1.12
hwNativeTDMConnectStatClear
Clear the native TDM connect statistics.
Options:
1. clearExecute(1) -clear the native TDM connect statistics
2. invalid(-1) -invalid value
Default: clearExecute(1)
Enumerationr/w
Enumerated Values:
-1invalid
1clearExecute
 .1.3.6.1.4.1.2011.5.105.1.6.1.50
hwNativeTDMConnectUpstreamRecvEthPackets
Statistics of the Rx upstream Ethernet packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.105.1.6.1.51
hwNativeTDMConnectDownstreamSendEthPackets
Statistics of the Tx downstream Ethernet packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.105.1.6.1.52
hwNativeTDMConnectUpstreamRecvVC12Packets
Statistics of the Rx upstream VC12 frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.105.1.6.1.53
hwNativeTDMConnectDownstreamSendVC12Packets
Statistics of the Tx downstream VC12 frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.105.1.6.1.54
hwNativeTDMConnectFifoFullPackets
FIFO full statistics in the de-jitter buffer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.105.1.6.1.55
hwNativeTDMConnectFifoEmptyPackets
FIFO empty statistics in the de-jitter buffer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.105.1.6.1.56
hwNativeTDMConnectOnuDropPackets
Discarded packets on onu side.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.105.1.6.1.57
hwNativeTDMConnectOnuRecvPackets
Received packets on onu side.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.105.1.6.1.58
hwNativeTDMConnectOnuSendPackets
Transmitted packets on onu side.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.105.1.6.1.59
hwNativeTDMConnectOnuRecvErrCesopPackets
Received abnormal CESoP packets on onu side.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.105.1.6.1.60
hwNativeTDMConnectOnuRecvSnErrCesopPackets
Received SN-error CESoP packets on onu side.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.105.1.6.1.61
hwNativeTDMConnectOnuRecvSsrcErrCesopPackets
Received SSRC-error CESoP packets on onu side.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.105.1.6.1.62

hwNativeTDMBoardAttrTable

table
.1.3.6.1.4.1.2011.5.105.1.7 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwNativeTDMBoardAttrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTDM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTDM-MIB::hwNativeTDMBoardAttrTable' 
Configuration table of Native TDM to CESoP board attribute, such as loopback type.
The indexes of this table are hwNativeTDMBoardAttrFrameIndex and hwNativeTDMBoardAttrSlotIndex.
hwNativeTDMBoardAttrEntry row .1.3.6.1.4.1.2011.5.105.1.7.1
Configuration table of Native TDM to CESoP board attribute, such as loopback type.
The indexes of this entry are hwNativeTDMBoardAttrFrameIndex and hwNativeTDMBoardAttrSlotIndex.
Indexes
Column Syntax OID
hwNativeTDMBoardAttrFrameIndex
Frame ID of the TDM board.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.105.1.7.1.1
hwNativeTDMBoardAttrSlotIndex
Slot ID of the TDM board.
Integer32
Constraints:
range: -1-22
 .1.3.6.1.4.1.2011.5.105.1.7.1.2
hwNativeTDMBoardLoopback
Loopback type of the TDM board.
Options:
1. noloop(1) -no loopback
2. cesopinloop(2) -cesop in loopback
3. cesopoutloop(3) -cesop out loopback
4. nativeoutloop(4) -native out loopback
5. nativeinloop(5) …
Enumerationr/w
Enumerated Values:
1noloop
2cesopinloop
3cesopoutloop
4nativeoutloop
5nativeinloop
 .1.3.6.1.4.1.2011.5.105.1.7.1.3