This object indicates that an alarm is generated when the ratio of the number of ND entries on a board to the maximum number of ND entries supported on the board is greater than or equal to the 80% threshold.
hwNDAntiAttackRateLimit
.1.3.6.1.4.1.2011.5.25.332.2.10
This object indicates that an alarm is generated when ND packet or ND Miss message speed exceeds the rate limit.
hwNDProxyDynThresholdExceedAlarm
.1.3.6.1.4.1.2011.5.25.332.2.11
This object indicates that an alarm is generated when the ratio of the number of proxy ND dynamic entries on a board to the maximum number of proxy ND entries supported on the board is greater than or equal to the 80% threshold.
hwNDProxyDynThresholdResumeAlarm
.1.3.6.1.4.1.2011.5.25.332.2.12
This object indicates that a clear alarm is generated when the ratio of the number of proxy ND dynmic entries on a board to the maximum number of proxy ND entries supported on the board is less than or equal to the 70% threshold.
hwSlotNDThresholdResumeAlarm
.1.3.6.1.4.1.2011.5.25.332.2.2
This object indicates that a clear alarm is generated when the ratio of the number of ND entries on a board to the maximum number of ND entries supported on the board is less than or equal to the 70% threshold.
hwInterfaceNDThresholdExceedAlarm
.1.3.6.1.4.1.2011.5.25.332.2.3
This object indicates that an alarm is generated when the ratio of the number of ND entries on an interface to the maximum number of ND entries supported on the interface is greater than or equal to the 80% threshold.
hwInterfaceNDThresholdResumeAlarm
.1.3.6.1.4.1.2011.5.25.332.2.4
This object indicates that a clear alarm is generated when the ratio of the number of ND entries on an interface to the maximum number of ND entries supported on the interface is less than or equal to the 70% threshold.
hwNDHostIPConflict
.1.3.6.1.4.1.2011.5.25.332.2.5
This object indicates that an alarm is generated when there may be two host have the same IPv6 address.
hwNDHostIPConflictResume
.1.3.6.1.4.1.2011.5.25.332.2.6
This object indicates the clear alarm of the alarm generated when there may be two host have the same IPv6 address.
hwNDDuplicateIPv6
.1.3.6.1.4.1.2011.5.25.332.2.7
This object indicates that an alarm is generated when customer config interface IPv6 address with the same as the current IPv6 address on the network.
hwNDDuplicateIPv6Resume
.1.3.6.1.4.1.2011.5.25.332.2.8
This object indicates the clear alarm of the alarm generated when there may not be an IPv6 address that has been used by any node to the interface
hwNDDADNotFinished
.1.3.6.1.4.1.2011.5.25.332.2.9
This object indicates that an alarm is generated when DAD is not finished.