HUAWEI-MULTICAST-MIB Table View

Table contains VLAN based configuration information
for IGMP Snooping.

hwVlanCfgEntry row .1.3.6.1.4.1.2011.5.25.44.1.2.1.1

An entry is created for each active VLAN in the device
and deleted when the VLAN becomes inactive.

Indexes

hwVlanIndex

Column	Syntax	OID
hwVlanIndex This object indicates the VLAN in which IGMP Snooping is configured.	VlanIndex Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.44.1.2.1.1.1
hwVlanIgmpSnoopingEnabled When this object is set to 'enabled(1)' IGMP Snooping is enabled on this VLAN else disabled.	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.44.1.2.1.1.2
hwVlanRouterAgingTime Unit:second. Configure the aging time of the router port. 0:180s or holdtime in hello	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.2011.5.25.44.1.2.1.1.3
hwVlanMaxQueryRespTime Unit:second.Configure the maximum query response time.	Integer32r/w Constraints: range: 1-25	.1.3.6.1.4.1.2011.5.25.44.1.2.1.1.4
hwVlanLastMemQueryInt Unit:second.Configure the last member query interval.	Integer32r/w Constraints: range: 1-5	.1.3.6.1.4.1.2011.5.25.44.1.2.1.1.5
hwVlanQueryInt Unit:second.Configure the query interval.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2011.5.25.44.1.2.1.1.6
hwVlanRobustCount Configure the IGMP robust count.	Integer32r/w Constraints: range: 2-5	.1.3.6.1.4.1.2011.5.25.44.1.2.1.1.7
hwVlanCheckRouterAlert When this object is set to 'true' ,Received IGMP messages must contain the IP Router Alert option in their IPheader. Ignore IGMP messages without Router Alert options ,and require that routers not forward these message…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.44.1.2.1.1.8
hwVlanSendRouterAlert When this object is set to 'true' ,Sended IGMP messages must contain the IP Router Alert option in their IPheader.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.44.1.2.1.1.9
hwVlanIgmpVersion The object indicates that igmp snooping can handle the hightest IGMP version	Enumerationr/w Enumerated Values: 1 igmpV1 2 igmpV2 3 igmpV3	.1.3.6.1.4.1.2011.5.25.44.1.2.1.1.10
hwVlanPromptLeaveEnable Prompt Leave Enable or disable	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.44.1.2.1.1.11
hwVlanPromptLeaveAclNum The ACL Number which is used to limit the scope of prompt leave group 2000: the minimum acl number 3999: the maximum acl number -1: unvalid value	Integer32r/w Constraints: range: -1--1 range: 2000-3999	.1.3.6.1.4.1.2011.5.25.44.1.2.1.1.12
hwVlanDropUnknown When this object is set to 'enabled(1)' Unknown stream is droped on this VLAN else disabled.	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.44.1.2.1.1.13
hwVlanLimitAction When this object is set to 'enabled(1)' table limit action on port.	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.44.1.2.1.1.14
hwVlanIgmpSnoopingQuerierEnabled Description.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.25.44.1.2.1.1.15
hwVlanIgmpSnoopingProxy Description.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.25.44.1.2.1.1.16

Table contains VLAN based configuration information for IGMP Proxy.

hwVlanIgmpProxyEntry row .1.3.6.1.4.1.2011.5.25.44.1.2.2.1

IGMP Proxy table entry.

Indexes

hwVlanIgmpProxyIndex

Column	Syntax	OID
hwVlanIgmpProxyIndex This object indicates the VLAN in which IGMP Proxy is configured.	VlanIndex Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.44.1.2.2.1.1
hwVlanIgmpProxyEnabled This object indicates enable or disable IGMP Proxy.	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.44.1.2.2.1.2
hwVlanQueryInterval IGMP query interval.	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.2011.5.25.44.1.2.2.1.3
hwVlanMaxResponseTime Maximum query response time.	Integer32r/w Constraints: range: 1-25	.1.3.6.1.4.1.2011.5.25.44.1.2.2.1.4
hwVlanLastMemQueryInterval Last member query interval.	Integer32r/w Constraints: range: 1-5	.1.3.6.1.4.1.2011.5.25.44.1.2.2.1.5
hwVlanIgmpRouterAgingTime Specify router port aging time.	Integer32r/w Constraints: range: 1-1000	.1.3.6.1.4.1.2011.5.25.44.1.2.2.1.6
hwVlanMaxIgmpVersion Specify the highest IGMP version to deal, 1:IGMP V1, 2:IGMP v1 and IGMP v2.	Integer32r/w Constraints: range: 1-2	.1.3.6.1.4.1.2011.5.25.44.1.2.2.1.7
hwVlanIgmpRobustCount Robust coefficient.	Integer32r/w Constraints: range: 2-5	.1.3.6.1.4.1.2011.5.25.44.1.2.2.1.8
hwVlanRequireRouterAlert When this object is set to 'true' ,Received IGMP messages must contain the IP Router Alert option in their IPheader. Ignore IGMP messages without Router Alert options ,and require that routers not forward these message…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.44.1.2.2.1.9
hwVlanIgmpSendRouterAlert When this object is set to 'true' ,Sended IGMP messages must contain the IP Router Alert option in their Ipheader.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.44.1.2.2.1.10
hwVlanIgmpPromptLeaveEnable Indicates whether enable 'Quick leave'.	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.44.1.2.2.1.11

Table to config L2 multicast.

hwL2McastVlanCfgEntry row .1.3.6.1.4.1.2011.5.25.44.1.2.3.1

This object indicates the VLAN in which Multicast is configured.

Indexes

hwL2McastVlanIndex

Column	Syntax	OID
hwL2McastVlanIndex This object indicates the VLAN in which Multicast is configured.	VlanIndex Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.44.1.2.3.1.1
hwVlanL2FlowTriggerEnabled This object indicates whether flow trigger was enabled.	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.44.1.2.3.1.2
hwVlanL2StaticFlow configure static flow.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.44.1.2.3.1.3

.

hwVlanStatisticsEntry row .1.3.6.1.4.1.2011.5.25.44.1.3.2.1

.

Indexes

hwVlanStatsVlanIndex

Column	Syntax	OID
hwVlanStatsVlanIndex This object indicates the VLAN in which IGMP Snooping counts packet.when clear statistics information,0 is all Vlans.	VlanIndex Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.44.1.3.2.1.1
hwVlanRecvIGMPV1ReportNum The statistics of IGMP V1 report packets received on the device.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.1.3.2.1.2
hwVlanRecvIGMPV2ReportNum The statistics of IGMP V2 report packets received on the device.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.1.3.2.1.3
hwVlanRecvIGMPV3ReportNum The statistics of IGMP V3 report packets received on the device.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.1.3.2.1.4
hwVlanRecvIGMPLeaveNum The statistics of IGMP leave packets received on the device.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.1.3.2.1.5
hwVlanRecvIGMPV1QueryNum The statistics of IGMP V1 query packets received on the device.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.1.3.2.1.6
hwVlanRecvIGMPV2QueryNum The statistics of IGMP V2 query packets received on the device.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.1.3.2.1.7
hwVlanRecvIGMPV3QueryNum The statistics of IGMP V3 query packets received on the device.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.1.3.2.1.8
hwVlanRecvPimHelloNum The statistics of pim hello packets received on the device.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.1.3.2.1.9
hwVlanSendQueryNum The statistics of query packets sended on the device.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.1.3.2.1.10
hwVlanIGMPPacketClearStats Clear statistics information.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.44.1.3.2.1.11
hwVlanSendSourceIPSpecQueryNum The statistics of source-ip-specific query packets sent from the device.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.1.3.2.1.12

Table contains multicast group exit port information through 
multicast group address.

hwIPGrpInfoEntry row .1.3.6.1.4.1.2011.5.25.44.1.4.1.1

An entry contains exit port information for a specific Vlan
or all Vlans.

Indexes

hwIPGrpVlanIndex hwIPGrpPortIfIndex hwIPGrpAddress

Column	Syntax	OID
hwIPGrpVlanIndex This object indicates the VLAN in which in which the group is learned.	VlanIndex Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.44.1.4.1.1.1
hwIPGrpPortIfIndex This object indicates port name.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.44.1.4.1.1.2
hwIPGrpAddress This object indicates IP multicast address learned by IGMP Snooping.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.44.1.4.1.1.3
hwIPGrpUpTime This object indicates time that multicast group information created.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.1.4.1.1.4
hwIPHostUpTime host port up time	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.1.4.1.1.5
hwIPHostExpires host port expire time	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.1.4.1.1.6
hwIPHostFlags host port flag	PortFlag Type Values: 0 none 1 dynamic 2 static 3 staticANDdynamic	.1.3.6.1.4.1.2011.5.25.44.1.4.1.1.7
hwIPRtUPTime router port up time	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.1.4.1.1.8
hwIPRtExpires router port expire time	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.1.4.1.1.9
hwIPRtFlags router port flag	PortFlag Type Values: 0 none 1 dynamic 2 static 3 staticANDdynamic	.1.3.6.1.4.1.2011.5.25.44.1.4.1.1.10

Table contains mac-group information.

hwMACGrpInfoEntry row .1.3.6.1.4.1.2011.5.25.44.1.4.2.1

An entry contains mac-group information for a specific Vlan.

Indexes

hwMACGrpVlanIndex hwMACGrpPortIfIndex hwMACGrpAddress

Column	Syntax	OID
hwMACGrpVlanIndex This object indicates the VLAN in which the group is learned.	VlanIndex Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.44.1.4.2.1.1
hwMACGrpPortIfIndex This object indicates port name .	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.44.1.4.2.1.2
hwMACGrpAddress This object indicates mac group address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.44.1.4.2.1.3

Table used to config multicast group.

hwMcastGrpCfgEntry row .1.3.6.1.4.1.2011.5.25.44.1.4.3.1

Table entry.

Indexes

hwGrpProfileNameIndex hwGrpListNameIndex hwGrpNameIndex

Column	Syntax	OID
hwGrpProfileNameIndex Multicast profile name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.5.25.44.1.4.3.1.1
hwGrpListNameIndex Multicast list name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.5.25.44.1.4.3.1.2
hwGrpNameIndex Multicast group name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.5.25.44.1.4.3.1.3
hwGrpIpAddress Multicast group address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.44.1.4.3.1.4
hwGrpRowStatus This object is used to create or delete a row and represent the current status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.44.1.4.3.1.100

Table to apply a multicast profile on vlan.

hwVlanMcastGrpEntry row .1.3.6.1.4.1.2011.5.25.44.1.4.4.1

Table entry.

Indexes

hwVlanMcastIndex

Column	Syntax	OID
hwVlanMcastIndex This object indicates the VLAN in which Multicast is configured.	VlanIndex Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.44.1.4.4.1.1
hwVlanMcastProfileName Multicast profile name.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.5.25.44.1.4.4.1.2

Table to config multicast profile.

hwMcastGrpProfileEntry row .1.3.6.1.4.1.2011.5.25.44.1.4.5.1

Table entry.

Indexes

hwVlanMulticastProfileName

Column	Syntax	OID
hwVlanMulticastProfileName Multicast profile name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.5.25.44.1.4.5.1.1
hwMulticastProfilePreviewTimes Multicast profile preview times.	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.2011.5.25.44.1.4.5.1.2
hwMulticastProfilePreviewMinutes Multicast profile preview minutes.	Integer32r/w Constraints: range: 1-30	.1.3.6.1.4.1.2011.5.25.44.1.4.5.1.3
hwMulticastProfilePreviewInterval Multicast profile preview interval.	Integer32r/w Constraints: range: 1-30	.1.3.6.1.4.1.2011.5.25.44.1.4.5.1.4

Table contains multicast group exit port information through 
multicast group address.

hwExternIpGrpInfoEntry row .1.3.6.1.4.1.2011.5.25.44.1.4.6.1

An entry contains exit port information for a specific VLAN
or all VLANs.

Indexes

hwExternIpGrpVlanIndex hwExternIpGrpPortIfIndex hwExternIpGrpAddress hwExternIpSourceAddress

Column	Syntax	OID
hwExternIpGrpVlanIndex This object indicates the VLAN in which in which the group is learned.	VlanIndex Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.44.1.4.6.1.1
hwExternIpGrpPortIfIndex This object indicates port name.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.44.1.4.6.1.2
hwExternIpGrpAddress This object indicates IP multicast address learned by IGMP snooping.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.44.1.4.6.1.3
hwExternIpGrpUpTime This object indicates time that multicast group information created.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.1.4.6.1.4
hwExternIpHostUpTime Host port up time.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.1.4.6.1.5
hwExternIpHostExpires Host port expire time.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.1.4.6.1.6
hwExternIpHostFlag Host port flag.	PortFlag Type Values: 0 none 1 dynamic 2 static 3 staticANDdynamic	.1.3.6.1.4.1.2011.5.25.44.1.4.6.1.7
hwExternIpRtUpTime Router port up time.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.1.4.6.1.8
hwExternIpRtExpires Router port expire time.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.1.4.6.1.9
hwExternIpRtFlag Router port flag.	PortFlag Type Values: 0 none 1 dynamic 2 static 3 staticANDdynamic	.1.3.6.1.4.1.2011.5.25.44.1.4.6.1.10
hwExternIpSourceAddress This object indicates IP source address learned by IGMP snooping.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.44.1.4.6.1.11

Table contains port config information.

hwPortStaticGrpEntry row .1.3.6.1.4.1.2011.5.25.44.1.5.1.1

An entry contains port config information.

Indexes

hwPortStaticGrpVlanIndex hwPortStaticGrpIfIndex hwPortStaticGrpAddr

Column	Syntax	OID
hwPortStaticGrpVlanIndex This object indicates the VLAN in which VLAN is configed.	VlanIndex Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.44.1.5.1.1.1
hwPortStaticGrpIfIndex This object indicates the interface in which port is configed.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.44.1.5.1.1.2
hwPortStaticGrpAddr This object indicates static join multicast group address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.44.1.5.1.1.3
hwPortStaticGrpRowStatus This object is used to create or delete a row and represent the current status of this row. Now support state:CreateAndGo,Destroy.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.44.1.5.1.1.100

Table contains group policy config information.

hwGrpPolicyCfgEntry row .1.3.6.1.4.1.2011.5.25.44.1.5.2.1

An entry contains group policy config information.

Indexes

hwGrpPolicyVlanIndex

Column	Syntax	OID
hwGrpPolicyVlanIndex The Vlan ID which group policy config.	VlanIndex Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.44.1.5.2.1.1
hwGrpPolicyAclNum The ACL Number which is used as the group policy parameter.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.44.1.5.2.1.2
hwGrpPolicyIgmpVersion This object indicates the IGMP version for the group policy.	Enumerationr/w Enumerated Values: 1 igmpV1 2 igmpV2 3 igmpV1V2 4 igmpV3 5 igmpV1V2V3	.1.3.6.1.4.1.2011.5.25.44.1.5.2.1.3
hwGrpPolicyRowStatus This object is used to create or delete a row and represent the current status of this row. Now support three state:CreateAndGo,Active,Destroy.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.44.1.5.2.1.100

Table containsrouter port infromation in specify vlan

hwRouterPortInfoEntry row .1.3.6.1.4.1.2011.5.25.44.1.5.3.1

a entry contains port infromation in specify vlan

Indexes

hwRouterPortVlanIndex hwRouterPortIfIndex

Column	Syntax	OID
hwRouterPortVlanIndex vlan id	VlanIndex Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.44.1.5.3.1.1
hwRouterPortIfIndex router port name in specify vlan	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.44.1.5.3.1.2
hwRouterPortUpTime router port up time	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.1.5.3.1.3
hwRouterPortExpires router port expire time	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.1.5.3.1.4
hwRouterPortFlags router port flag	PortFlag Type Values: 0 none 1 dynamic 2 static 3 staticANDdynamic	.1.3.6.1.4.1.2011.5.25.44.1.5.3.1.5

Table contains router port config information.

hwRouterPortCfgEntry row .1.3.6.1.4.1.2011.5.25.44.1.5.4.1

An entry contains router port config information.

Indexes

hwRouterPortCfgVlanIndex hwRouterPortCfgIfIndex

Column	Syntax	OID
hwRouterPortCfgVlanIndex This object indicates the VLAN in which VLAN is configed.	VlanIndex Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.44.1.5.4.1.1
hwRouterPortCfgIfIndex This object indicates the interface which port is configed.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.44.1.5.4.1.2
hwRouterPortCfgRowStatus This object is used to create or delete a row and represent the current status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.44.1.5.4.1.100

A table contains IGMP Snooping entry count limit 
information on a port.

hwPortLimitEntry row .1.3.6.1.4.1.2011.5.25.44.1.5.5.1

An entry contains IGMP Snooping entry count limit
information on a port.

Indexes

hwPortLimitIfIndex

Column	Syntax	OID
hwPortLimitIfIndex Index of the interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.44.1.5.5.1.1
hwPortLimitNumber The maximum number of IGMP-Snooping entries can be configured or learned.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.44.1.5.5.1.2
hwPortLimitRowStatus This object is used to create or delete a row and represent the current status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.44.1.5.5.1.100

A table contains group policy config information in port.

hwPortGroupPolicyEntry row .1.3.6.1.4.1.2011.5.25.44.1.5.6.1

An entry contains group policy config information in port.

Indexes

hwPortGroupPolicyIfIndex hwPortGroupPolicyVlanIndex

Column	Syntax	OID
hwPortGroupPolicyIfIndex Index of the interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.44.1.5.6.1.1
hwPortGroupPolicyAclNumber The ACL number which is used as the group policy parameter.	Integer32r/w Constraints: range: -1--1 range: 2000-3999	.1.3.6.1.4.1.2011.5.25.44.1.5.6.1.2
hwPortGroupPolicyVlanIndex The vlan ID which group policy config.	VlanIndex Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.44.1.5.6.1.3
hwPortGroupPolicyVersion This object indicates the IGMP version for the group policy.	Enumerationr/w Enumerated Values: 1 igmpV1 2 igmpV2 3 igmpV1V2 4 igmpV3 5 igmpV1V2V3	.1.3.6.1.4.1.2011.5.25.44.1.5.6.1.4
hwPortGroupPolicyRowStatus This object is used to create or delete a row and represent the current status of this row. Now support three state:CreateAndGo,Active,Destroy.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.44.1.5.6.1.51

Table contains port config information.

hwExternPortStaticGrpEntry row .1.3.6.1.4.1.2011.5.25.44.1.5.7.1

An entry contains port config information.

Indexes

hwExternPortStaticGrpVlanIndex hwExternPortStaticGrpIfIndex hwExternPortStaticGroupAddr hwExternPortStaticSourceAddr

Column	Syntax	OID
hwExternPortStaticGrpVlanIndex This object indicates the VLAN in which VLAN is configed.	VlanIndex Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.44.1.5.7.1.1
hwExternPortStaticGrpIfIndex This object indicates the interface in which port is configed.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.44.1.5.7.1.2
hwExternPortStaticGroupAddr This object indicates static join multicast group address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.44.1.5.7.1.3
hwExternPortStaticSourceAddr This object indicates static join multicast source address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.44.1.5.7.1.4
hwExternPortStaticGrpRowStatus This object is used to create or delete a row and represent the current status of this row. Now support state:CreateAndGo,Destroy.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.44.1.5.7.1.51

A table contains IGMP snooping entry count limit 
information on a port.

hwPortVlanLimitEntry row .1.3.6.1.4.1.2011.5.25.44.1.5.8.1

An entry contains IGMP snooping entry count limit
information on a port.

Indexes

hwPortVlanLimitIfIndex hwPortVlanLimitVlanIndex

Column	Syntax	OID
hwPortVlanLimitIfIndex Index of the interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.44.1.5.8.1.1
hwPortVlanLimitNumber The maximum number of IGMP snooping entries can be configured or learned.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.44.1.5.8.1.2
hwPortVlanLimitVlanIndex The maximum number of IGMP snooping entries can be configured or learned.	VlanIndex Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.44.1.5.8.1.3
hwPortVlanLimitRowStatus This object is used to create or delete a row and represent the current status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.44.1.5.8.1.51

Table contains VLAN based configuration information 
for MLD snooping.

hwMldVlanCfgEntry row .1.3.6.1.4.1.2011.5.25.44.2.2.1.1

An entry is created for each active VLAN in the device
and deleted when the VLAN becomes inactive.

Indexes

hwMldVlanIndex

Column	Syntax	OID
hwMldVlanIndex This object indicates the VLAN in which MLD snooping is configured.	VlanIndex Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.44.2.2.1.1.1
hwVlanMldSnoopingEnabled When this object is set to 'enabled(1)' MLD snooping is enabled on this VLAN else disabled.	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.44.2.2.1.1.2
hwMldVlanRouterAgingTime Unit:second. Configure the aging time of the router port. 0:180s or holdtime in hello.	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.2011.5.25.44.2.2.1.1.3
hwMldVlanMaxQueryRespTime Unit:second. Configure the maximum query response time.	Integer32r/w Constraints: range: 1-25	.1.3.6.1.4.1.2011.5.25.44.2.2.1.1.4
hwMldVlanLastListenerQueryInt Unit:second. Configure the last listener query interval.	Integer32r/w Constraints: range: 1-5	.1.3.6.1.4.1.2011.5.25.44.2.2.1.1.5
hwMldVlanQueryInt Unit:second. Configure the query interval.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2011.5.25.44.2.2.1.1.6
hwMldVlanRobustCount Configure the MLD robust count.	Integer32r/w Constraints: range: 2-5	.1.3.6.1.4.1.2011.5.25.44.2.2.1.1.7
hwMldVlanCheckRouterAlert When this object is set to 'true', received MLD messages must contain the IP router alert option in their IP header. Ignore MLD messages without router alert options ,and require that routers not forward these messages.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.44.2.2.1.1.8
hwMldVlanSendRouterAlert When this object is set to 'true', sended MLD messages must contain the IP router alert option in their IP header.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.44.2.2.1.1.9
hwVlanMldVersion The object indicates that MLD snooping can handle the hightest MLD version.	Enumerationr/w Enumerated Values: 1 mldV1 2 mldV2	.1.3.6.1.4.1.2011.5.25.44.2.2.1.1.10
hwMldVlanPromptLeaveEnable Prompt leave enable(1) or disable(2).	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.44.2.2.1.1.11
hwMldVlanPromptLeaveAclNum The ACL number which is used to limit the scope of prompt leave group. 2000: the minimum ACL number 3999: the maximum ACL number -1: unvalid value	Integer32r/w Constraints: range: 2000-3999 range: -1--1	.1.3.6.1.4.1.2011.5.25.44.2.2.1.1.12
hwMldVlanDropUnknown When this object is set to 'enabled(1)' unknown stream is droped on this VLAN else disabled.	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.44.2.2.1.1.13
hwVlanMldSnoopingQuerierEnabled Description.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.25.44.2.2.1.1.14
hwVlanMldSnoopingProxy Description.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.25.44.2.2.1.1.15

Table contains MLD VLAN statistics.

hwMldVlanStatisticsEntry row .1.3.6.1.4.1.2011.5.25.44.2.3.2.1

An entry contains MLD VLAN statistics.

Indexes

hwMldVlanStatsVlanIndex

Column	Syntax	OID
hwMldVlanStatsVlanIndex This object indicates the VLAN in which MLD snooping counts packet.When clear statistics information,0 is all vlans.	VlanIndex Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.44.2.3.2.1.1
hwVlanRecvMldV1ReportNum The statistics of MLD V1 report packets received on the device.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.2.3.2.1.2
hwVlanRecvMldV2ReportNum The statistics of MLD V2 report packets received on the device.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.2.3.2.1.3
hwVlanRecvMldDoneNum The statistics of MLD leave packets received on the device.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.2.3.2.1.4
hwVlanRecvMldV1QueryNum The statistics of MLD V1 query packets received on the device.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.2.3.2.1.5
hwVlanRecvMldV2QueryNum The statistics of MLD V2 query packets received on the device.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.2.3.2.1.6
hwVlanRecvIpv6PimHelloNum The statistics of PIM hello packets received on the device.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.2.3.2.1.7
hwVlanSendMldQueryNum The statistics of query packets sended on the device.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.2.3.2.1.8
hwVlanMldPacketClearStats Clear statistics information.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.44.2.3.2.1.9
hwVlanSendSourceIpSpecMldQueryNum Count of query packets with the specified source IPv6 address.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.2.3.2.1.10

Table contains multicast group exit port information through 
multicast group address.

hwMldIpGrpInfoEntry row .1.3.6.1.4.1.2011.5.25.44.2.4.1.1

An entry contains exit port information for a specific vlan
or all vlans.

Indexes

hwMldIpGrpVlanIndex hwMldIpGrpPortIfIndex hwMldIpGrpAddress hwMldIpSourceAddress

Column	Syntax	OID
hwMldIpGrpVlanIndex This object indicates the VLAN in which in which the group is learned.	VlanIndex Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.44.2.4.1.1.1
hwMldIpGrpPortIfIndex This object indicates port name.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.44.2.4.1.1.2
hwMldIpGrpAddress This object indicates IP multicast address learned by MLD snooping.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2011.5.25.44.2.4.1.1.3
hwMldIpGrpUpTime This object indicates time that multicast group information created.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.2.4.1.1.4
hwMldIpHostUpTime Time for the host port remaining in the up state.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.2.4.1.1.5
hwMldIpHostExpires Time for the host port expires.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.2.4.1.1.6
hwMldIpHostFlag Host port flag.	PortFlag Type Values: 0 none 1 dynamic 2 static 3 staticANDdynamic	.1.3.6.1.4.1.2011.5.25.44.2.4.1.1.7
hwMldIpRtUpTime Time for the router port remaining in the up state.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.2.4.1.1.8
hwMldIpRtExpires Time for the router port expires.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.2.4.1.1.9
hwMldIpRtFlag Router port flag.	PortFlag Type Values: 0 none 1 dynamic 2 static 3 staticANDdynamic	.1.3.6.1.4.1.2011.5.25.44.2.4.1.1.10
hwMldIpSourceAddress This object indicates IP source address learned by MLD snooping.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2011.5.25.44.2.4.1.1.11

Table contains port config information.

hwMldPortStaticGrpEntry row .1.3.6.1.4.1.2011.5.25.44.2.5.1.1

An entry contains port config information.

Indexes

hwMldPortStaticGrpVlanIndex hwMldPortStaticGrpIfIndex hwMldPortStaticGrpAddr hwMldPortStaticSourceAddr

Column	Syntax	OID
hwMldPortStaticGrpVlanIndex This object indicates the VLAN in which VLAN is configed.	VlanIndex Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.44.2.5.1.1.1
hwMldPortStaticGrpIfIndex This object indicates the interface in which port is configed.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.44.2.5.1.1.2
hwMldPortStaticGrpAddr This object indicates static join multicast group address.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2011.5.25.44.2.5.1.1.3
hwMldPortStaticSourceAddr This object indicates static join multicast source address.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2011.5.25.44.2.5.1.1.4
hwMldPortStaticGrpRowStatus This object is used to create or delete a row and represent the current status of this row. Now support state:CreateAndGo,Destroy.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.44.2.5.1.1.51

Table contains group policy config information.

hwMldGrpPolicyCfgEntry row .1.3.6.1.4.1.2011.5.25.44.2.5.2.1

An entry contains group policy config information.

Indexes

hwMldGrpPolicyVlanIndex

Column	Syntax	OID
hwMldGrpPolicyVlanIndex The vlan ID which group policy config.	VlanIndex Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.44.2.5.2.1.1
hwMldGrpPolicyAclNum The ACL number which is used as the group policy parameter.	Integer32r/w Constraints: range: -1--1 range: 2000-3999	.1.3.6.1.4.1.2011.5.25.44.2.5.2.1.2
hwGrpPolicyMldVersion This object indicates the MLD version for the group policy.	Enumerationr/w Enumerated Values: 1 mldV1 2 mldV2 3 mldV1V2	.1.3.6.1.4.1.2011.5.25.44.2.5.2.1.3
hwMldGrpPolicyRowStatus This object is used to create or delete a row and represent the current status of this row. Now support three state:CreateAndGo,Active,Destroy.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.44.2.5.2.1.51

Table containsrouter port infromation in specify vlan.

hwMldRouterPortInfoEntry row .1.3.6.1.4.1.2011.5.25.44.2.5.3.1

An entry contains port infromation in specify vlan.

Indexes

hwMldRouterPortVlanIndex hwMldRouterPortIfIndex

Column	Syntax	OID
hwMldRouterPortVlanIndex VLAN ID.	VlanIndex Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.44.2.5.3.1.1
hwMldRouterPortIfIndex Router port name in specify vlan.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.44.2.5.3.1.2
hwMldRouterPortUpTime Time for router port remains up state.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.2.5.3.1.3
hwMldRouterPortExpires Time for router port expires.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.44.2.5.3.1.4
hwMldRouterPortFlag Router port flag.	PortFlag Type Values: 0 none 1 dynamic 2 static 3 staticANDdynamic	.1.3.6.1.4.1.2011.5.25.44.2.5.3.1.5

Table contains router port config information.

hwMldRouterPortCfgEntry row .1.3.6.1.4.1.2011.5.25.44.2.5.4.1

An entry contains router port config information.

Indexes

hwMldRouterPortCfgVlanIndex hwMldRouterPortCfgIfIndex

Column	Syntax	OID
hwMldRouterPortCfgVlanIndex This object indicates the VLAN in which VLAN is configed.	VlanIndex Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.44.2.5.4.1.1
hwMldRouterPortCfgIfIndex This object indicates the interface which port is configed.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.44.2.5.4.1.2
hwMldRouterPortCfgRowStatus This object is used to create or delete a row and represent the current status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.44.2.5.4.1.51

A table contains MLD snooping entry count limit 
information on a port.

hwMldPortLimitEntry row .1.3.6.1.4.1.2011.5.25.44.2.5.5.1

An entry contains MLD snooping entry count limit
information on a port.

Indexes

hwMldPortLimitIfIndex hwMldPortLimitVlanIndex

Column	Syntax	OID
hwMldPortLimitIfIndex Index of the interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.44.2.5.5.1.1
hwMldPortLimitNumber The maximum number of MLD snooping entries can be configured or learned.	Integer32r/w Constraints: range: 1-1024	.1.3.6.1.4.1.2011.5.25.44.2.5.5.1.2
hwMldPortLimitVlanIndex The maximum number of MLD snooping entries can be configured or learned.	VlanIndex Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.44.2.5.5.1.3
hwMldPortLimitRowStatus This object is used to create or delete a row and represent the current status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.44.2.5.5.1.51

A table contains group policy config information in port.

hwMldPortGroupPolicyEntry row .1.3.6.1.4.1.2011.5.25.44.2.5.6.1

An entry contains group policy config information in port.

Indexes

hwMldPortGroupPolicyIfIndex hwMldPortGroupPolicyVlanIndex

Column	Syntax	OID
hwMldPortGroupPolicyIfIndex Index of the interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.44.2.5.6.1.1
hwMldPortGroupPolicyAclNumber The ACL number which is used as the group policy parameter.	Integer32r/w Constraints: range: -1--1 range: 2000-3999	.1.3.6.1.4.1.2011.5.25.44.2.5.6.1.2
hwMldPortGroupPolicyVlanIndex The vlan ID which group policy config.	VlanIndex Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.44.2.5.6.1.3
hwMldPortGroupPolicyVersion This object indicates the MLD version for the group policy.	Enumerationr/w Enumerated Values: 1 mldV1 2 mldV2 3 mldV1V2	.1.3.6.1.4.1.2011.5.25.44.2.5.6.1.4
hwMldPortGroupPolicyRowStatus This object is used to create or delete a row and represent the current status of this row. Now support three state:CreateAndGo,Active,Destroy.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.44.2.5.6.1.51

Table which indicates which vlan had been configured as Multicast-Vlan.

hwMVlanEnableEntry row .1.3.6.1.4.1.2011.5.25.44.3.2.1.1

Entry for vlan which had been configured as Multicast-Vlan.

Indexes

hwMVlanIndex

Column	Syntax	OID
hwMVlanIndex Vlan index which had been configured as Multicast-Vlan.	VlanIndex Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.44.3.2.1.1.1
hwMVlanStatus The activation of a row enables MVlan in the interface. The destruction of a row disables MVlan in the interface.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.44.3.2.1.1.100

Table which indicates the user vlans in a MVlan.

hwMVlanUserVlanEntry row .1.3.6.1.4.1.2011.5.25.44.3.2.2.1

Entry for User vlan in a Mvlan.

Indexes

hwMVlanIndex hwUserVlanIndex

Column	Syntax	OID
hwUserVlanIndex Vlan index which in the given MVlan.	VlanIndex Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.44.3.2.2.1.1
hwUserVlanCfgRowStatus This object is used to create or delete a row and represent the current status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.44.3.2.2.1.100

Table which indicates which vlan had been
configured as flow trigger.

hwUserVlanEntry row .1.3.6.1.4.1.2011.5.25.44.3.2.3.1

Entry for vlan which had been configured
as flow trigger.

Indexes

hwUserVlanIndex

Column	Syntax	OID
hwUserVlanFlowTriggerEnable This object indicates user vlan's flow trigger status.	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.44.3.2.3.1.1

Table which indicates which vlan and which port had been 
configured as source deny.

hwMcSourceDenyEntry row .1.3.6.1.4.1.2011.5.25.44.3.2.4.1

Entry for vlan and port which had been configured
source deny.

Indexes

hwMcSourceDenyVlanIndex hwMcSourceDenyIfIndex

Column	Syntax	OID
hwMcSourceDenyVlanIndex VLAN index.	VlanIndex Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.44.3.2.4.1.1
hwMcSourceDenyIfIndex Interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.44.3.2.4.1.2
hwMcSourceDenyRowStatus This object is used to create or delete a row and represent the current status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.44.3.2.4.1.51

Table which indicates Mvlan group information.

hwMVlanGrpInfoEntry row .1.3.6.1.4.1.2011.5.25.44.3.3.1.1

Entry for Mvlan group information.

Indexes

hwMVlanIndex hwMVlanGrpAddress hwMVlanGrpPortIfIndex hwMVlanGrpUserVlanIndex

Column	Syntax	OID
hwMVlanGrpAddress Multicast group address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.44.3.3.1.1.1
hwMVlanGrpPortIfIndex Interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.44.3.3.1.1.2
hwMVlanGrpUserVlanIndex User vlan index.	VlanIndex Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.44.3.3.1.1.3

Table which indicates Mvlan static flow group information.

hwMVlanStaticFlowEntry row .1.3.6.1.4.1.2011.5.25.44.3.3.2.1

Entry for Mvlan static flow group information.

Indexes

hwMVlanIndex hwMVlanStaticFlowGrpAddress

Column	Syntax	OID
hwMVlanStaticFlowGrpAddress Static flow address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.44.3.3.2.1.1
hwMVlanStaticFlowRowStatus This object is used to create or delete a row and represent the current status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.44.3.3.2.1.2

Table which indicates Mvlan static flow group information.

hwMVlanIpv6StaticFlowEntry row .1.3.6.1.4.1.2011.5.25.44.3.3.3.1

Entry for Mvlan static flow group information.

Indexes

hwMVlanIndex hwMVlanStaticFlowIpv6GrpAddress hwMVlanStaticFlowIpv6SourceAddress

Column	Syntax	OID
hwMVlanStaticFlowIpv6GrpAddress Static flow address.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2011.5.25.44.3.3.3.1.1
hwMVlanStaticFlowIpv6SourceAddress Static flow source IP address.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2011.5.25.44.3.3.3.1.2
hwMVlanIpv6StaticFlowRowStatus This object is used to create or delete a row and represent the current status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.44.3.3.3.1.51

Table which indicates MVLAN static flow group information.

hwExternMVlanStaticFlowEntry row .1.3.6.1.4.1.2011.5.25.44.3.3.4.1

Entry for MVLAN static flow group information.

Indexes

hwMVlanIndex hwExternMVlanStaticFlowGrpAddress hwExternMVlanStaticFlowSourceAddress

Column	Syntax	OID
hwExternMVlanStaticFlowGrpAddress Static flow address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.44.3.3.4.1.1
hwExternMVlanStaticFlowSourceAddress Static flow source IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.44.3.3.4.1.2
hwExternMVlanStaticFlowRowStatus This object is used to create or delete a row and represent the current status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.44.3.3.4.1.51

Table contains multicast group config information.

hwMcastGroupEntry row .1.3.6.1.4.1.2011.5.25.44.6.2.1.1

An entry contains multicast group config information.

Indexes

hwMcastGroupIndex

Column	Syntax	OID
hwMcastGroupIndex Multicast group index.	Integer32 Constraints: range: 1-1024	.1.3.6.1.4.1.2011.5.25.44.6.2.1.1.1
hwMcastGroupName Multicast group name.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.5.25.44.6.2.1.1.2
hwMcastGroupAddress Multicast group address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.44.6.2.1.1.3
hwMcastGroupRowStatus This object is used to create or delete a row and represent the current status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.44.6.2.1.1.4
hwMcastSourceAddress Source IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.44.6.2.1.1.5

Table which indicates multicast list information.

hwMcastListEntry row .1.3.6.1.4.1.2011.5.25.44.6.2.2.1

An entry contains multicast list config information.

Indexes

hwMcastListIndex

Column	Syntax	OID
hwMcastListIndex Multicast list index.	Integer32 Constraints: range: 1-128	.1.3.6.1.4.1.2011.5.25.44.6.2.2.1.1
hwMcastListName Multicast list name.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.5.25.44.6.2.2.1.2
hwMcastListRowStatus This object is used to create or delete a row and represent the current status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.44.6.2.2.1.3

Table which indicates multicast profile information.

hwMcastProfileEntry row .1.3.6.1.4.1.2011.5.25.44.6.2.3.1

An entry contains multicast profile config information.

Indexes

hwMcastProfileIndex

Column	Syntax	OID
hwMcastProfileIndex Multicast profile index.	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.2011.5.25.44.6.2.3.1.1
hwMcastProfileName Multicast profile name.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2011.5.25.44.6.2.3.1.2
hwMcastProfileRowStatus This object is used to create or delete a row and represent the current status of this row..	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.44.6.2.3.1.3

Table contains multicast profile based configuration information for IPTV.

hwMcastProfileCfgEntry row .1.3.6.1.4.1.2011.5.25.44.6.2.4.1

An entry contains configuration for multicast profile.

Indexes

hwMcastProfileIndex

Column	Syntax	OID
hwMcastProfileCfgPreviewTimes Times of preview a multicast group one day.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.44.6.2.4.1.1
hwMcastProfileCfgPreviewMinute Preview time(in minutes).	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.44.6.2.4.1.2
hwMcastProfileCfgPreviewInterval Preview interval(in minutes).	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.44.6.2.4.1.3
hwMcastProfileCfgMaxNumProgram Max number of the multicast program watching and previewing.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.44.6.2.4.1.4

Table contains multicast list refers to multicast group.

hwMcastListReferEntry row .1.3.6.1.4.1.2011.5.25.44.6.2.5.1

An entry contains multicast list refers to multicast group.

Indexes

hwMcastListIndex hwMcastGroupIndex

Column	Syntax	OID
hwMcastListReferRowStatus This object is used to create or delete a row and represent the current status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.44.6.2.5.1.5

Table contains multicast profile refers to multicast list.

hwMcastProfileReferEntry row .1.3.6.1.4.1.2011.5.25.44.6.2.6.1

An entry contains multicast profile refers to multicast list.

Indexes

hwMcastProfileIndex hwMcastListIndex

Column	Syntax	OID
hwMcastPreviewStatus This object is used to create or delete a row and represent the current status of this row.	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.44.6.2.6.1.1
hwMcastProfileReferRowStatus Table contains vlan apply multicast profile.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.44.6.2.6.1.5

An entry contains attach a vlan to a multicast profile.

hwVlanApplyProfileEntry row .1.3.6.1.4.1.2011.5.25.44.6.2.7.1

Description.

Indexes

hwUserVlanIndex hwMcastProfileIndex

Column	Syntax	OID
hwVlanApplyProfileRowStatus This object is used to create or delete a row and represent the current status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.44.6.2.7.1.5