HUAWEI-MPLS-LDP-MIB Table View

MPLS provides support for multiple incarnations of the 
MPLS Stack in a target. The LSR defined in the standard <IETF
DRAFT> MIB is treated as an incarnation in this MIB. Using a
local policy the Network administrator must group the LDP Entities
that should be placed in an incarnation.

hwMplsLdpLsrIncarnEntry row .1.3.6.1.4.1.2011.5.12.2.1.1.1.1

An entry in this table represents an LSR incarnation.
All the entries in this table are created initially when the
LDP is initiated. The row status of each entry will be in
'notInService' state initially. The row stat…

Indexes

hwMplsLdpLsrIncarnID

Column	Syntax	OID
hwMplsLdpLsrID The LSR's Identifier.	MplsLsrIdentifierr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.12.2.1.1.1.1.1
hwMplsLdpLsrLoopDetectionPresent A indication of whether this LSR supports loop detection. A value of 'true' indicates this LSR does support loop detection. A value of 'false' indicates this LSR does not support loop detection.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.12.2.1.1.1.1.2
hwMplsLdpLsrLoopDetectionAdminStatus To enable loop detection the value of this object should be 'enabled(1)'. Otherwise, to turn off loop detection, set this value to 'disabled(2)'.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.12.2.1.1.1.1.3
hwMplsLdpLsrPathVectorLimit This object only has meaning if hwMplsLdpLsrLoopDetectionPresent has the value of 'true'. The value of this object represents the limit of path vectors which this LSR uses to treat the message as if it h…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.12.2.1.1.1.1.4
hwMplsLdpLsrHopCountLimit This object only has meaning if hwMplsLdpLsrLoopDetectionPresent has the value of 'true'. The value of this object represents the limit on the Hop Count which this LSR uses to treat the message as if it…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.12.2.1.1.1.1.5
hwMplsLdpLsrLoopPreventionPresent A indication of whether this LSR supports loop prevention. A value of 'true' indicates this LSR does support loop prevention. A value of 'false' indicates this LSR does not support loop prevention. C…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.12.2.1.1.1.1.6
hwMplsLdpLsrLoopPreventionAdminStatus To enable loop prevention the value of this object should be 'enabled(1)'. Otherwise, to turn off loop prevention, set this value to 'disabled(2)'. Current release of MPLS does not provide support to a…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.12.2.1.1.1.1.7
hwMplsLdpLsrLabelRetentionMode The LSR can be configured to use either conservative or liberal label retention mode. If the value of this object is conservative(1) then advertized label mappings are retained only if they will be used…	Enumerationr/w Enumerated Values: 1 conservative 2 liberal	.1.3.6.1.4.1.2011.5.12.2.1.1.1.1.8
hwMplsLdpLsrIncarnID The incarnation acts as index to all the elements in this table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.12.2.1.1.1.1.9
hwMplsLdpLsrMaxLdpEntities The maximum number of LDP entities that can be supported by this Incarnation.	Integer32r/w Constraints: range: 1-1024	.1.3.6.1.4.1.2011.5.12.2.1.1.1.1.10
hwMplsLdpLsrMaxLocalPeers The maximum number of Local LDP peers that can be supported by this Incarnation.	Integer32r/w Constraints: range: 1-1024	.1.3.6.1.4.1.2011.5.12.2.1.1.1.1.11
hwMplsLdpLsrMaxRemotePeers The maximum number of Remote LDP peers that can be supported by this Incarnation.	Integer32r/w Constraints: range: 1-1024	.1.3.6.1.4.1.2011.5.12.2.1.1.1.1.12
hwMplsLdpLsrMaxIfaces The maximum number of Label enabled Interfaces that can be supported by this Incarnation.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.12.2.1.1.1.1.13
hwMplsLdpLsrMaxLsps The maximum number of Label Switched Paths that can be supported by this Incarnation.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.12.2.1.1.1.1.14
hwMplsLdpLsrMaxCrlspTnls The maximum number of CRLSPs that can be supported by this Incarnation.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.12.2.1.1.1.1.15
hwMplsLdpLsrMaxErhopPerCrlspTnl The maximum number of ER-Hops that can be supported in a CRLSP tunnel.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.12.2.1.1.1.1.16
hwMplsLdpLsrRowStatus An object that allows entries in this table to be created and deleted using the RowStatus convention.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.12.2.1.1.1.1.17
hwMplsLdpLsrMaxVcmCapability	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.12.2.1.1.1.1.18
hwMplsLdpLsrVcmPathVecInAllLblMapPresent	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.12.2.1.1.1.1.19
hwMplsLdpLsrRequestRetrytimerValue	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.12.2.1.1.1.1.20
hwMplsLdpLsrNumOfRequestRetryAttempts	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.12.2.1.1.1.1.21

This table contains information about the
MPLS Label Distribution Protocol Entities which
exist on this Label Switch Router (LSR).

hwMplsLdpEntityEntry row .1.3.6.1.4.1.2011.5.12.2.1.2.1.1

An entry in this table represents an LDP entity.
An entry can be created by a network administrator
or by an SNMP agent as instructed by LDP.

An LPD Entity is uniquely indexed by its LPD
Identifier.

Indexes

hwMplsLdpLsrIncarnID hwMplsLdpEntityIfIndex

Column	Syntax	OID
hwMplsLdpEntityID The LDP identifier which uniquely identifies the LDP Entity. This is s six octet quantity which is used to identify an Label Switch Router (LSR) label space. The first four octets encode an IP address as…	MplsLdpIdentifier Type Constraints: range: 6	.1.3.6.1.4.1.2011.5.12.2.1.2.1.1.1
hwMplsLdpEntityLabelSpaceType The type of label spaces associated with this LDP Entity. The values are 'unknown(1)' The type of label space is not known. 'perInterface(2)' The type…	Enumerationr/w Enumerated Values: 1 unknown 2 perInterface 3 perPlatform	.1.3.6.1.4.1.2011.5.12.2.1.2.1.1.2
hwMplsLdpEntityDefVpi The Default VPI value used in the label for the default VPI.	AtmVpIdentifierr/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.2011.5.12.2.1.2.1.1.3
hwMplsLdpEntityDefVci The Default VCI value used in the label for the default VCI.	AtmVcIdentifierr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.2011.5.12.2.1.2.1.1.4
hwMplsLdpEntityUnlabTrafVpi VPI value of the VCC supporting unlabeled traffic.	AtmVpIdentifierr/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.2011.5.12.2.1.2.1.1.5
hwMplsLdpEntityUnlabTrafVci VCI value of the VCC supporting unlabeled traffic.	AtmVcIdentifierr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.2011.5.12.2.1.2.1.1.6
hwMplsLdpEntityMergeCapability Sets the merge capability for this LDP entity. Current Release of MPLS does not provide support for any kind of Merge.	Enumerationr/w Enumerated Values: 0 noMerge 1 vpMerge 2 vcMerge 3 vpVcMerge	.1.3.6.1.4.1.2011.5.12.2.1.2.1.1.7
hwMplsLdpEntityVcDirectionality Sets the VC directionality for this LDP entity.	Enumerationr/w Enumerated Values: 1 bidirectional 2 unidirectional	.1.3.6.1.4.1.2011.5.12.2.1.2.1.1.8
hwMplsLdpEntityWellKnownDiscoveryPort The well known LDP Discovery Port.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.12.2.1.2.1.1.9
hwMplsLdpEntityMtu The maximum transmission unit (MTU) that was configured for this entity.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2011.5.12.2.1.2.1.1.10
hwMplsLdpEntityKeepAliveHoldTimer The two octet value which is the proposed keep alive hold timer for this LDP Entity.	secondsInteger32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2011.5.12.2.1.2.1.1.11
hwMplsLdpEntityFailedInitSessionThreshold When attempting to establish a session with a given Peer, the given LDP Entity should send out a notification when exceeding this threshold. A value of 0 (zero) for this object indicates that the threshold is infinity. …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.12.2.1.2.1.1.12
hwMplsLdpEntityLabelDistributionMethod For any given LDP session, the method of label distribution must be specified. Current release of MPLS does not provide support for 'downstreamUnsolicited'.	Enumerationr/w Enumerated Values: 1 downstreamOnDemand 2 downstreamUnsolicited	.1.3.6.1.4.1.2011.5.12.2.1.2.1.1.13
hwMplsLdpEntityLabelAllocationMethod For any given LDP session, the method of label allocation must be specified. Label can be allocated in either ordered mode or in the independent mode.	Enumerationr/w Enumerated Values: 1 ordered 2 independent	.1.3.6.1.4.1.2011.5.12.2.1.2.1.1.14
hwMplsLdpEntityHelloHoldTimer The two octet value which is the proposed hello hold timer for this LDP Entity.	secondsInteger32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2011.5.12.2.1.2.1.1.15
hwMplsLdpEntityRowStatus An object that allows entries in this table to be created and deleted using the RowStatus convention.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.12.2.1.2.1.1.16

This table contains information about the
interfaces that are associated with an LDP Entity.
There should be atleast one interface associated with
each LDP Entity. If the LDP Entity supports 'per interface
based label space' label type then, atmost one interface can be 
associated with the LDP entity. If the LDP Entity supports
'per platform based label space' label type then, more than one
interface can be associated with the LDP Entity.

hwMplsLdpEntityIfEntry row .1.3.6.1.4.1.2011.5.12.2.1.2.2.1

An entry in this table represents an Interface that is
associated with a LDP entity.

An entry can be created by a network administrator
or by an SNMP agent as instructed by LDP.

An interface (r…

Indexes

hwMplsLdpLsrIncarnID hwMplsLdpEntityIfIndex

Column	Syntax	OID
hwMplsLdpEntityIfIndex Identifier that uniquely identifies the Interface with respect to an LDP Entity. The ifIndex value corresponds to the IfIndex value of the MIB-II	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.5.12.2.1.2.2.1.1
hwMplsLdpEntityIfIpv4Address The IPv4 address associated with the interface.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.12.2.1.2.2.1.2
hwMplsLdpEntityIfRowStatus An object that allows entries in this table to be created and deleted using the RowStatus convention.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.12.2.1.2.2.1.3

The MPLS LDP Entity Configurable ATM Label Range Table.
The purpose of this table is to provide a mechanism
for specifying a contiguous range of vpi's
with a contiguous range of vci's, or a 'label range'
for LDP Entities.
          
LDP Entities which use ATM must have at least one
entry in this table.

hwMplsLdpEntityConfAtmLabelRangeEntry row .1.3.6.1.4.1.2011.5.12.2.1.2.3.1

A row in the LDP Entity Configurable ATM Label
Range Table. One entry in this table contains
information on a single range of labels
represented by the configured Upper and Lower
Bounds VPI/VCI pairs.
NOTE: The ranges…

Indexes

hwMplsLdpLsrIncarnID hwMplsLdpEntityIfIndex hwMplsLdpEntityConfAtmLabelRangeLowerBoundVPI hwMplsLdpEntityConfAtmLabelRangeLowerBoundVCI

Column	Syntax	OID
hwMplsLdpEntityConfAtmLabelRangeLowerBoundVPI The minimum VPI number configured for this range.	AtmVpIdentifier Type Constraints: range: 0..4095	.1.3.6.1.4.1.2011.5.12.2.1.2.3.1.1
hwMplsLdpEntityConfAtmLabelRangeLowerBoundVCI The minimum VCI number configured for this range.	AtmVcIdentifier Type Constraints: range: 0..65535	.1.3.6.1.4.1.2011.5.12.2.1.2.3.1.2
hwMplsLdpEntityConfAtmLabelRangeUpperBoundVPI The maximum VPI number configured for this range.	AtmVpIdentifierr/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.2011.5.12.2.1.2.3.1.3
hwMplsLdpEntityConfAtmLabelRangeUpperBoundVCI The maximum VCI number configured for this range.	AtmVcIdentifierr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.2011.5.12.2.1.2.3.1.4
hwMplsLdpEntityConfAtmLabelRangeRowStatus An object that allows entries in this table to be created and deleted using the RowStatus convention.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.12.2.1.2.3.1.5

This table is a read-only table which augments
the MplsLdpConfEntityTable.  The purpose of this
table is to keep statistical information about
the LDP Entities on the LSR.

hwMplsLdpEntityStatsEntry row .1.3.6.1.4.1.2011.5.12.2.1.2.4.1

A row in this table contains statistical information
about an LDP Entity.

Indexes

No indexes recorded

Column	Syntax	OID
hwMplsLdpAttemptedSessions A count of the total attempted sessions for this LDP Entity.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.12.2.1.2.4.1.1

Information about LDP peers which have been discovered
by the LDP Entities that are managed by this agent.

hwMplsLdpPeerEntry row .1.3.6.1.4.1.2011.5.12.2.1.3.1.1

Information about a single Peer.

Indexes

hwMplsLdpLsrIncarnID hwMplsLdpEntityIfIndex hwMplsLdpPeerIndex

Column	Syntax	OID
hwMplsLdpPeerIndex An identifier for the LDP peer that is unique within the scope of this agent.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.5.12.2.1.3.1.1.1
hwMplsLdpPeerID The LDP identifier of this LDP Peer.	MplsLdpIdentifierr/w Type Constraints: range: 6	.1.3.6.1.4.1.2011.5.12.2.1.3.1.1.2
hwMplsLdpPeerInternetworkAddrType The type of the internetwork layer address of this LDP peer. This object indicates how the value of hwMplsLdpPeerInternetworkAddr is to be interpreted.	AddressFamilyNumbersr/w Type Values: 0 other 1 ipv4 2 ipv6 3 nsap 4 hdlc 5 bbn1822 6 ieee802 7 e163 8 e164 9 f69 10 x121 11 ipx 12 appleTalk 13 decnetIV 14 banyanVines 15 e164WithNsap	.1.3.6.1.4.1.2011.5.12.2.1.3.1.1.3
hwMplsLdpPeerInternetworkAddr The value of the internetwork layer address of this LDP peer.	MplsLdpGenAddrr/w Type Constraints: range: 0..64	.1.3.6.1.4.1.2011.5.12.2.1.3.1.1.4
hwMplsLdpPeerDefaultMtu The default maximum transmission unit (MTU) of the LDP Peer.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2011.5.12.2.1.3.1.1.5
hwMplsLdpPeerKeepAliveHoldTimer The two octet unsigned non zero INTEGER that indicates the number of seconds that this Peer proposes for the value of the KeepAlive Interval.	secondsInteger32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2011.5.12.2.1.3.1.1.6
hwMplsLdpPeerLabelDistributionMethod For any given LDP session, the method of label distribution must be specified.	Enumerationr/w Enumerated Values: 1 downstreamOnDemand 2 downstreamUnsolicited	.1.3.6.1.4.1.2011.5.12.2.1.3.1.1.7
hwMplsLdpPeerType Indicates whether a peer is a local peer or a remote peer	Enumerationr/w Enumerated Values: 1 local 2 remote	.1.3.6.1.4.1.2011.5.12.2.1.3.1.1.8
hwMplsLdpPeerRowStatus An object that allows entries in this table to be created and deleted using the RowStatus convention.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.12.2.1.3.1.1.9

The MPLS LDP Peer Configurable ATM Label Range Table.
The purpose of this table is to provide a mechanism
for specifying a contiguous range of vpi's with a contiguous
range of vci's, or a 'label range' for LDP Peers.
LDP Peers which use ATM must have at least one
entry in this table.

hwMplsLdpPeerConfAtmLabelRangeEntry row .1.3.6.1.4.1.2011.5.12.2.1.3.2.1

A row in the LDP Peer Configurable ATM Label Range Table.
One entry in this table contains information
on a single range of labels represented by
the configured Upper and Lower Bounds VPI/VCI pairs.

NOTE: …

Indexes

hwMplsLdpLsrIncarnID hwMplsLdpEntityIfIndex hwMplsLdpPeerIndex hwMplsLdpPeerConfAtmLabelRangeLowerBoundVPI hwMplsLdpPeerConfAtmLabelRangeLowerBoundVCI

Column	Syntax	OID
hwMplsLdpPeerConfAtmLabelRangeLowerBoundVPI The minimum VPI number configured for this range.	AtmVpIdentifier Type Constraints: range: 0..4095	.1.3.6.1.4.1.2011.5.12.2.1.3.2.1.1
hwMplsLdpPeerConfAtmLabelRangeLowerBoundVCI The minimum VCI number configured for this range.	AtmVcIdentifier Type Constraints: range: 0..65535	.1.3.6.1.4.1.2011.5.12.2.1.3.2.1.2
hwMplsLdpPeerConfAtmLabelRangeUpperBoundVPI The maximum VPI number configured for this range.	AtmVpIdentifier Type Constraints: range: 0..4095	.1.3.6.1.4.1.2011.5.12.2.1.3.2.1.3
hwMplsLdpPeerConfAtmLabelRangeUpperBoundVCI The maximum VCI number configured for this range.	AtmVcIdentifier Type Constraints: range: 0..65535	.1.3.6.1.4.1.2011.5.12.2.1.3.2.1.4

A table of Sessions between the LDP Entities and
LDP Peers.

hwMplsLdpSessionEntry row .1.3.6.1.4.1.2011.5.12.2.1.4.1.1

An entry in this table represents information on a
single session between an LDP Entity and LDP Peer.

Indexes

hwMplsLdpLsrIncarnID hwMplsLdpEntityIfIndex hwMplsLdpPeerIndex hwMplsLdpSessionIndex

Column	Syntax	OID
hwMplsLdpSessionIndex An unique identifier for this entry such that it identifies a specific LDP Session.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.5.12.2.1.4.1.1.1
hwMplsLdpSessionID The LDP Session identifier.	MplsLdpIdentifier Type Constraints: range: 6	.1.3.6.1.4.1.2011.5.12.2.1.4.1.1.2
hwMplsLdpSessionProtocolVersion The version of the LDP Protocol which this session is using.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2011.5.12.2.1.4.1.1.3
hwMplsLdpSessionKeepAliveHoldTimeRemaining The keep alive hold time remaining for this session.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.2011.5.12.2.1.4.1.1.4
hwMplsLdpSessionRole An indication of whether the LDP Entity associated with this session is acting in an 'active' role or a 'passive' role.	Enumeration Enumerated Values: 1 active 2 passive	.1.3.6.1.4.1.2011.5.12.2.1.4.1.1.5
hwMplsLdpSessionState The current state of the session, all of the states 1 - 5 are based on the state machine for session negotiation behavior.	Enumeration Enumerated Values: 1 nonexistent 2 initialized 3 openrec 4 opensent 5 operational	.1.3.6.1.4.1.2011.5.12.2.1.4.1.1.6
hwMplsLdpSessionAtmLabelRangeLowerBoundVPI The minimum VPI number for this range.	AtmVpIdentifier Type Constraints: range: 0..4095	.1.3.6.1.4.1.2011.5.12.2.1.4.1.1.7
hwMplsLdpSessionAtmLabelRangeLowerBoundVCI The minimum VCI number for this range.	AtmVcIdentifier Type Constraints: range: 0..65535	.1.3.6.1.4.1.2011.5.12.2.1.4.1.1.8
hwMplsLdpSessionAtmLabelRangeUpperBoundVPI The maximum VPI number for this range.	AtmVpIdentifier Type Constraints: range: 0..4095	.1.3.6.1.4.1.2011.5.12.2.1.4.1.1.9
hwMplsLdpSessionAtmLabelRangeUpperBoundVCI The maximum VCI number for this range.	AtmVcIdentifier Type Constraints: range: 0..65535	.1.3.6.1.4.1.2011.5.12.2.1.4.1.1.10

A table of Hello Adjacencies for Sessions.

hwMplsLdpHelloAdjacencyEntry row .1.3.6.1.4.1.2011.5.12.2.1.5.1.1

Each row represents a single LDP Hello Adjacency.
An LDP Session can have one or more Hello adjacencies.

Indexes

hwMplsLdpLsrIncarnID hwMplsLdpEntityIfIndex hwMplsLdpPeerIndex hwMplsLdpSessionIndex hwMplsLdpHelloAdjacencyIndex

Column	Syntax	OID
hwMplsLdpHelloAdjacencyIndex An identifier for the adjacency.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.5.12.2.1.5.1.1.1
hwMplsLdpHelloAdjacencyHoldTimeRemaining The time remaining for this Hello Adjacency.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.2011.5.12.2.1.5.1.1.2

The hwMplsLdpCrlspTnlTable allows new CRLSP MPLS tunnels
to be created. The ER hops associated with a CRLSP tunnel
are to be configured using the hwMplsLdpCrlspErHopTable.

hwMplsLdpCrlspTnlEntry row .1.3.6.1.4.1.2011.5.12.2.1.6.1.1

An entry in this table represents an CRLSP MPLS tunnel.
An entry can be created by a network administrator.

Indexes

hwMplsLdpLsrIncarnID hwMplsLdpCrlspTnlIndex

Column	Syntax	OID
hwMplsLdpCrlspTnlIndex Uniquely identifies this row.	MplsTunnelIndex Type Constraints: range: 0..65535	.1.3.6.1.4.1.2011.5.12.2.1.6.1.1.1
hwMplsLdpCrlspTnlName The 'canonical' name assigned to the tunnel that can be used to refer to it on the 'console' port.	DisplayStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2011.5.12.2.1.6.1.1.2
hwMplsLdpCrlspTnlDirection Whether this tunnel is unidirectional-incoming, unidirectional-outgoing, or bidirectional.	Enumerationr/w Enumerated Values: 1 in 2 out 3 inOut	.1.3.6.1.4.1.2011.5.12.2.1.6.1.1.3
hwMplsLdpCrlspTnlSignallingProto The signaling protocol, if any, that set up this tunnel.	Enumerationr/w Enumerated Values: 1 none 2 ldp 3 rsvp	.1.3.6.1.4.1.2011.5.12.2.1.6.1.1.4
hwMplsLdpCrlspTnlSetupPrio The setup priority of this tunnel.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.5.12.2.1.6.1.1.5
hwMplsLdpCrlspTnlHoldingPrio The holding priority for this tunnel.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.5.12.2.1.6.1.1.6
hwMplsLdpCrlspTnlPeakDataRate The peak rate - the maximum rate at which traffic will be sent on the CRLSP.	bits per secondBitRater/w	.1.3.6.1.4.1.2011.5.12.2.1.6.1.1.7
hwMplsLdpCrlspTnlPeakBurstSize The peak burst size - the maximum burst size of the traffic that can occur in the established CRLSP.	bytesBurstSizer/w	.1.3.6.1.4.1.2011.5.12.2.1.6.1.1.8
hwMplsLdpCrlspTnlCommittedDataRate The committed rate - the committed rate at which traffic will be sent on the CRLSP.	bits per secondBitRater/w	.1.3.6.1.4.1.2011.5.12.2.1.6.1.1.9
hwMplsLdpCrlspTnlCommittedBurstSize The committed burst size - the committed burst size of the traffic that will be handled in the established CRLSP.	bytesBurstSizer/w	.1.3.6.1.4.1.2011.5.12.2.1.6.1.1.10
hwMplsLdpCrlspTnlExcessBurstSize The Excess burst size - the excess burst size limit to be used for traffic conditioning at the ingress of the CRLSP.	bytesBurstSizer/w	.1.3.6.1.4.1.2011.5.12.2.1.6.1.1.11
hwMplsLdpCrlspTnlIsPinned Indicates whether the loose-routed hops of this tunnel are to be pinned.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.12.2.1.6.1.1.12
hwMplsLdpCrlspTnlFrequency Indicates the frequency of usage of the established CRLSP.	Integer32r/w Constraints: range: 0-2	.1.3.6.1.4.1.2011.5.12.2.1.6.1.1.13
hwMplsLdpCrlspTnlWeight Indicates the weight that is the established CRLSP.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.5.12.2.1.6.1.1.14
hwMplsLdpCrlspTnlRowStatus For controlling the state of this row. The status can be set to 'active' only when atleast one ERHOP is created in the hwMplsLdpErHopTable, associated with this tunnel.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.12.2.1.6.1.1.15

The hwMplsLdpCrlspErHopTable is used to indicate the hops,
strict  or  loose,  for an MPLS  CRLSP tunnel  defined  in
hwMplsLdpCrlspTnlTable. 
          
There must be atleast one entry in this table for each CRLSP tunnel 
that is supported in the hwMplsLdpCrlspTnlTable.
          
The first row in the table  is  the
first hop after the origination point of the tunnel.

hwMplsLdpCrlspErHopEntry row .1.3.6.1.4.1.2011.5.12.2.1.6.2.1

An entry in this table represents a tunnel hop. An
entry is created by a network administrator for
signalled ERLSP set up by LDP or RSVP.

Indexes

hwMplsLdpLsrIncarnID hwMplsLdpCrlspTnlIndex hwMplsLdpCrlspErHopIndex

Column	Syntax	OID
hwMplsLdpCrlspErHopIndex Secondary index into this table identifying the particular hop.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.12.2.1.6.2.1.1
hwMplsLdpCrlspErHopAddrType Address type of this hop.	Enumerationr/w Enumerated Values: 1 ipV4	.1.3.6.1.4.1.2011.5.12.2.1.6.2.1.2
hwMplsLdpCrlspErHopIpv4Addr If hwMplsLdpCrlspErHopAddrType is ipV4(1), IPv4 address of this hop. This object is not significant otherwise and should return a value of 0.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.12.2.1.6.2.1.3
hwMplsLdpCrlspErHopIpv4PrefixLen If hwMplsLdpCrlspErHopAddrType is ipV4(1), prefix length for this hop's IPv4 address. This object is not significant otherwise and should return a value of 0.	Integer32r/w Constraints: range: 1-32	.1.3.6.1.4.1.2011.5.12.2.1.6.2.1.4
hwMplsLdpCrlspErHopStrictOrLoose Whether this is a strict or loose hop.	Enumerationr/w Enumerated Values: 1 strict 2 loose	.1.3.6.1.4.1.2011.5.12.2.1.6.2.1.5
hwMplsLdpCrlspErHopRowStatus For creating, modifying and deleting this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.12.2.1.6.2.1.6