HUAWEI-MNGT-MIB Table View

User parameter configuration table, which supports the functions of querying, adding, 
deleting and modifying a user. The index of this table is hwCliUserName.

hwCliUserParaEntry row .1.3.6.1.4.1.2011.6.3.10.1.1

User parameter configuration table, which supports the functions of querying, adding,
deleting and modifying a user. The index of this entry is hwCliUserName.

Indexes

hwCliUserName

Column	Syntax	OID
hwCliUserName Name of the CLI user. The user name is case insensitive and the user name consists of 6-15 characters. The minimum length of the name can be configured by user. The range of the valid characters of the user name is 0x…	OctetString Constraints: range: 1-34	.1.3.6.1.4.1.2011.6.3.10.1.1.1
hwCliUserPassword Password of the CLI user. The user can directly modify the password of the CLI user and need not verify the original password of the CLI user. The user password consists of 16 characters, including at least one letter a…	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2011.6.3.10.1.1.2
hwCliUserLevel The levels of CLI users. Options: 1. common(1) -indicates the common user. 2. operator(2) -indicates the operator. 3. administrator(3) -indicates the administrator. 4. super(4) -indicates the sup…	Enumerationr/w Enumerated Values: 1 common 2 operator 3 administrator 4 super 5 guest 6 custom	.1.3.6.1.4.1.2011.6.3.10.1.1.3
hwCliUserLogins The number of user login attempts in one time. The same user name can be used for login to the device repeatedly. For example, when two users log in to the device with the same name, the number of times of re-login is …	Integer32r/w Constraints: range: 0-20	.1.3.6.1.4.1.2011.6.3.10.1.1.4
hwCliUserDecr Description of CLI user. You can add the basic information about the user, such as the email box, telephone number, or other contact information.	OctetStringr/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.6.3.10.1.1.5
hwCliUserRowStatus Operation status of CLI user, the CLI user can be added, deleted and modified. The user level, number of times of re-login, user profile, available user password and user description must be bound to the user when the …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.3.10.1.1.6
hwCliUserprofile The name of user profile that CLI user belongs to.	OctetStringr/w Constraints: range: 1-15	.1.3.6.1.4.1.2011.6.3.10.1.1.7
hwCliUserAccessType The user can log in to the device through the following three modes. Options: 1. cli(1) -indicates CLI terminal. 2. oss(2) -indicates OSS terminal. 3. web(4) -indicates Web terminal.	Enumerationr/w Enumerated Values: 1 cli 2 oss 4 web	.1.3.6.1.4.1.2011.6.3.10.1.1.8
hwCliUserTimeoutobsolete This object is not used any longer. Login timeout duration of the user. If the CLI user performs no operation during a period, the user automatically quits the system. This object is used to query and set the login t…	Integer32r/w Constraints: range: 1-120	.1.3.6.1.4.1.2011.6.3.10.1.1.9
hwCliUserNameLastDays Service life of the user name. The hwCliUserNameLastDays value of -1 indicates the username expired.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.3.10.1.1.10
hwCliUserPwdLastDays Service life of the user password. The hwCliUserPwdLastDays value of -1 indicates the user password expired.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.3.10.1.1.11

CLI online user information table, which can be used to 
force an online user to go offline.
The table cannot be created and deleted. 
The table supports only the functions of querying the user 
terminal status and forcing an online user to go offline.
The index of this table is hwCliClientID.

hwCliClientEntry row .1.3.6.1.4.1.2011.6.3.10.2.1

CLI online user information table, which can be used to
force an online user to go offline.
The table cannot be created and deleted.
The table supports only the functions of querying the user
terminal status and forci…

Indexes

hwCliClientID

Column	Syntax	OID
hwCliClientID Client ID(1..255). Index object, this ID is allocated by device. Value 255 indicates that the device does not allocate client IDs.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.2011.6.3.10.2.1.1
hwCliClientUserName User name of client.	OctetString Constraints: range: 1-34	.1.3.6.1.4.1.2011.6.3.10.2.1.2
hwCliClientType Type of client. The modes of login to the client are as follows: Options: 1. serial(1) -indicates serial port. 2. telnet(2) -indicates telnet. 3. proxy(3) -indicates proxy. 4. ssh(4) -indicates ssh. 5. omci(5) …	Enumeration Enumerated Values: 1 serial 2 telnet 3 proxy 4 ssh 5 omci 6 ethoam 7 adminVs	.1.3.6.1.4.1.2011.6.3.10.2.1.3
hwCliClientIp The IP address of client.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.3.10.2.1.4
hwCliClientLoginTime The login time of client.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2011.6.3.10.2.1.5
hwCliClientAdminStatus Admin status of client, can disconnect client. Options: 1. disconnect(1) -indicates the user who logs in to the system in the modes except serial port mode can be forced to go offline when …	Enumerationr/w Enumerated Values: -1 connect 1 disconnect	.1.3.6.1.4.1.2011.6.3.10.2.1.6
hwCliUserIdleTimeOut This object is not used any longer.Idleness timeout duration of the online user. When the online user is idle for a period longer than the preset time, the online user automatically quits the system. This object is use…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.3.10.2.1.7
hwCliClientInetAddressType The type of address in hwCliClientInetAddress. Options: 1. unknown(0) -If a user accesses through the serial port, the IP address type is unknown(0). 2. ipv4(1) -indicates that the IP address type is i…	Enumeration Enumerated Values: 0 unknown 1 ipv4 2 ipv6	.1.3.6.1.4.1.2011.6.3.10.2.1.8
hwCliClientInetAddress The object specifies the IP address of client.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2011.6.3.10.2.1.9

User profile management table, which is used to query, modify, add and delete the user profile.
The user profile is a set of public user attributes, including the user name and password 
validity period, permitted earliest time of login, and permitted latest time of login.
The MIB supports the functions of querying and setting the values of the preceding parameters.
A user needs to be created based on a user profile. In this case, the new user inherits the 
preceding parameter values in the user profile. The index of this table is hwCliUserProfileName.
The index value is the user profile name, it uniquely identifies the user profile. 
By default, four system profiles exist in the system. 
The names of the four system profiles are as follows: 
root, admin, operator and commonuser.

hwCliUserProfileParaEntry row .1.3.6.1.4.1.2011.6.3.10.5.1

User profile management table, which is used to query, modify, add and delete the user profile.
The user profile is a set of public user attributes, including the user name and password
validity period, permitted earli…

Indexes

hwCliUserProfileName

Column	Syntax	OID
hwCliUserProfileName The name of the user profile. The name of the new profile must be different from the names of the system profiles. The profile name consists of 1-15 characters.	OctetString Constraints: range: 1-15	.1.3.6.1.4.1.2011.6.3.10.5.1.1
hwCliUserNameAvailableInterval Validity period of user name. For example, if the validity period of the user name is 10, it indicates that the user name cannot be used for login after ten days since it is created. In addition, a message is displaye…	dayUnsigned32r/w Constraints: range: 0-999	.1.3.6.1.4.1.2011.6.3.10.5.1.4
hwCliUserPwdAvailableInterval Validity period of user password. For example, if the validity period of the user password is 10, it indicates that the user password cannot be used for login after ten days since it is created. In addition, a message i…	dayUnsigned32r/w Constraints: range: 0-999	.1.3.6.1.4.1.2011.6.3.10.5.1.5
hwCliUserLoginTime Permitted earliest time of login. The user can log in to the system at any time between 00:00 and 23:59.	OctetStringr/w Constraints: range: 5-5	.1.3.6.1.4.1.2011.6.3.10.5.1.6
hwCliUserLogoutTime Permitted latest time of login. The user can log in to the system at the time from the permitted earliest time to the permitted latest time. In other periods, the user cannot log in to the system.	OctetStringr/w Constraints: range: 5-5	.1.3.6.1.4.1.2011.6.3.10.5.1.7
hwCliUserProfileRowStatus This object is used to operate the user profile. The system profile cannot be modified or deleted. When a user is bound with the user profile, the user profile cannot be modified or deleted. The parameter settings of t…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.3.10.5.1.10

NMS user management table, which supports the login and logout of the NMS user 
and the function of querying the information about the online NMS user.
The index of this table is hwSNMPUserID. The index value is the user ID.

hwSNMPUserEntry row .1.3.6.1.4.1.2011.6.3.10.7.1

NMS user management table, which supports the login and logout of the NMS user
and the function of querying the information about the online NMS user.
The index of this entry is hwSNMPUserID. The index value is the use…

Indexes

hwSNMPUserID

Column	Syntax	OID
hwSNMPUserID SNMP user ID(1..8) and index object. The value that the device returns to the NMS, which uniquely identifies a user.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.2011.6.3.10.7.1.1
hwSNMPUserName Name of the SNMP user.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.2011.6.3.10.7.1.2
hwSNMPUserAdminStatus SNMP user admin status(1:logon,2:logoff). Visual local craft terminal (LCT). Options: 1. logon(1) -indicates that the user can be set to go online. 2. logoff(2) -indicates that the user can be set to go offline. …	Enumerationr/w Enumerated Values: 1 logon 2 logoff	.1.3.6.1.4.1.2011.6.3.10.7.1.3
hwSNMPUserType SNMP user type(1:lct). Options: 1.lct(1) -indicates that visual LCT, which is an NMS user type.	Enumerationr/w Enumerated Values: 1 lct	.1.3.6.1.4.1.2011.6.3.10.7.1.4
hwSNMPUserIP IP address that SNMP user use.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.3.10.7.1.5

The callback security configuration table.
This table is used to manage the callback telephone numbers and passwords.
The index of this table is hwModemCallbackIndex.

hwModemCallbackMngtEntry row .1.3.6.1.4.1.2011.6.3.10.11.2.1

The callback security configuration table.
This table is used to manage the callback telephone numbers and passwords.
The index of this entry is hwModemCallbackIndex.

Indexes

hwModemTelNumber

Column	Syntax	OID
hwModemTelNumber Telephone number	OctetString Constraints: range: 1-20	.1.3.6.1.4.1.2011.6.3.10.11.2.1.1
hwModemPassword User password. The password must be cipher encrypted by MD5, it consists of 16 characters.	OctetStringr/w Constraints: range: 1-16	.1.3.6.1.4.1.2011.6.3.10.11.2.1.2
hwModemCallbackRowStatus Operation user configration of the modem callback function, the user configration can be added and deleted. The user telephone number and password must be bound when the user is added. The exist telephone number or pa…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.3.10.11.2.1.3

Firewall switch table, which supports the functions of querying, 
enabling and disabling the protocol-type firewall switch.
The index of this table is hwFirewallProtocolType.

hwFirewallSwitchEntry row .1.3.6.1.4.1.2011.6.3.12.1.1

Firewall switch table, which supports the functions of querying,
enabling and disabling the protocol-type firewall switch.
The index of this entry is hwFirewallProtocolType.

Indexes

hwFirewallProtocolType

Column	Syntax	OID
hwFirewallProtocolType Index object, index of the hwFirewallSwitchTable object. Options: 1.telnet(1) -indicates that the firewall protocols is telnet. 2.ssh(2) -indicates that the firewall protocols is ssh. 3.snmp(3) -indicates that …	Enumeration Enumerated Values: 1 telnet 2 ssh 3 snmp	.1.3.6.1.4.1.2011.6.3.12.1.1.1
hwFirewallSwitch Firewall switch. Options: 1. enable(1) -indicates that when the device needs to control the protocol used to access the device, this command can be executed to enable(1) the firewall switch of the protoc…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.3.12.1.1.2

Access IP table, which supports the functions of querying, adding 
and deleting the access IP table of a specified protocol.
The access IP table is used to configure the address segments 
of the accessible devices under the specified protocol. 
This can prevent the invalid users from logging in to the device, that is, 
the operators whose IP addresses are not in the address segments 
and access protocols do not meet the requirements cannot access the device.
The indexes of this table are hwFirewallProtocolType and hwAccessIpStartAddr. 
For the hwFirewallProtocolType object, refer to hwFirewallSwitchTable.
hwAccessIpTable is used for configuring a list of accessible IP addresses. 
The IP address list takes effect only when the protocol corresponding to 
hwFirewallSwitchTable is enabled.

hwAccessIpEntry row .1.3.6.1.4.1.2011.6.3.12.2.1

Access IP table, which supports the functions of querying, adding
and deleting the access IP table of a specified protocol.
The access IP table is used to configure the address segments
of the accessible devices under…

Indexes

hwFirewallProtocolType hwAccessIpStartAddr

Column	Syntax	OID
hwAccessIpStartAddr Start IP address of one record in access Ip table. The IP address in the new record of the table must be valid, that is, the IP address is not a class 0 address or class D address. The record in which the start address …	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.3.12.2.1.1
hwAccessIpEndAddr End IP address of one record in access Ip table. The new IP address must be valid, that is, the IP address is not a class 0 address or class D address. The record in which the end address is smaller than the start add…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.3.12.2.1.2
hwAccessIpRowStatus Operation status of row. The specified protocol type and the start and end addresses in the start address permitting table can be modified. createAndGo(4) is supplied to create a new instance of a conceptual row. d…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.3.12.2.1.3

Refuse IP table. The table is used to configure the address segment 
(under a specified protocol) with which the user cannot access the device. 
This can prevent the invalid users from logging in to the device.
After address segment is configured in the table, the operators 
with the IP addresses in the address segment cannot access the device.
The indexes of this table are hwFirewallProtocolType and hwRefuseIpStartAddr.
For the hwFirewallProtocolType object, refer to hwFirewallSwitchTable.
hwRefuseIpTable is used for configuring a list of prohibited IP addresses. 
The IP address list takes effect only when the protocol corresponding to 
hwFirewallSwitchTable is enabled.

hwRefuseIpEntry row .1.3.6.1.4.1.2011.6.3.12.3.1

Refuse IP table. The table is used to configure the address segment
(under a specified protocol) with which the user cannot access the device.
This can prevent the invalid users from logging in to the device.
After ad…

Indexes

hwFirewallProtocolType hwRefuseIpStartAddr

Column	Syntax	OID
hwRefuseIpStartAddr Start IP address of one record in refuse Ip table. The IP address in the new record of the table must be valid, that is, the IP address is neither a class 0 address nor class D address. The record in which the start add…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.3.12.3.1.1
hwRefuseIpEndAddr End IP address of one record in refuse Ip table. The IP address in the new record of the table must be valid, that is, the IP address is not a class 0 address or class D address. The record in which the end address is …	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.3.12.3.1.2
hwRefuseIpRowStatus Operation status of row. The specified protocol type and the start and end addresses in the start address rejecting table can be modified. createAndGo(4) is supplied to create a new instance of a conceptual row. dest…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.3.12.3.1.3

IPv6 Firewall switch table, which supports the functions of querying, 
enabling and disabling the protocol-type firewall switch.
The index of this table is hwFirewallV6ProtocolType.

hwFirewallSwitchV6Entry row .1.3.6.1.4.1.2011.6.3.12.4.1

IPv6 Firewall switch table, which supports the functions of querying,
enabling and disabling the protocol-type firewall switch.
The index of this entry is hwFirewallV6ProtocolType.

Indexes

hwFirewallV6ProtocolType

Column	Syntax	OID
hwFirewallV6ProtocolType Index object, index of the hwFirewallSwitchV6Table object. Options: 1.telnet(1) -indicates that the IPv6 firewall protocols is telnet. 2.ssh(2) -indicates that the IPv6 firewall protocols is ssh. 3.snmp(3) -ind…	Enumeration Enumerated Values: 1 telnet 2 ssh 3 snmp	.1.3.6.1.4.1.2011.6.3.12.4.1.1
hwFirewallSwitchV6 Firewall switch. Options: 1. enable(1) -indicates that when the device needs to control the protocol used to access the device, this command can be executed to enable(1) the firewall switch of the protoc…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.3.12.4.1.2

Access IPv6 table, which supports the functions of querying, adding 
and deleting the access IPv6 table of a specified protocol.
The access IPv6 table is used to configure the address segments 
of the accessible devices under the specified protocol. 
This can prevent the invalid users from logging in to the device, that is, 
the operators whose IPv6 addresses are not in the address segments 
and access protocols do not meet the requirements cannot access the device.
The indexes of this table are hwFirewallV6ProtocolType and hwAccessIpv6StartAddr. 
For the hwFirewallV6ProtocolType object, refer to hwFirewallSwitchV6Table.
hwAccessIpv6Table is used for configuring a list of accessible IPv6 addresses. 
The IPv6 address list takes effect only when the protocol corresponding to 
hwFirewallSwitchV6Table is enabled.

hwAccessIpv6Entry row .1.3.6.1.4.1.2011.6.3.12.5.1

Access IPv6 table, which supports the functions of querying, adding
and deleting the access IPv6 table of a specified protocol.
The access IPv6 table is used to configure the address segments
of the accessible devices…

Indexes

hwFirewallV6ProtocolType hwAccessIpv6StartAddr

Column	Syntax	OID
hwAccessIpv6StartAddr Start IPv6 address of one record in access IPv6 table. The IPv6 address in the new record of the table must be valid. The record in which the start address is the same as the existing one cannot be added to the table.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2011.6.3.12.5.1.1
hwAccessIpv6EndAddr End IPv6 address of one record in access IPv6 table. The new IPv6 address must be valid, that is. The record in which the end address is smaller than the start address cannot be added and each protocol supports a maxim…	IPV6-TCIpv6Addressr/w Type Constraints: range: 16	.1.3.6.1.4.1.2011.6.3.12.5.1.2
hwAccessIpv6RowStatus Operation status of row. The specified protocol type and the start and end addresses in the start address permitting table can be modified. createAndGo(4) is supplied to create a new instance of a conceptual row. d…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.3.12.5.1.3

Refuse IPv6 table. The table is used to configure the address segment 
(under a specified protocol) with which the user cannot access the device. 
This can prevent the invalid users from logging in to the device.
After address segment is configured in the table, the operators 
with the IPv6 addresses in the address segment cannot access the device.
The indexes of this table are hwFirewallV6ProtocolType and hwRefuseIpv6StartAddr.
For the hwFirewallV6ProtocolType object, refer to hwFirewallSwitchV6Table.
hwRefuseIpv6Table is used for configuring a list of prohibited IPv6 addresses. 
The IPv6 address list takes effect only when the protocol corresponding to 
hwFirewallSwitchV6Table is enabled.

hwRefuseIpv6Entry row .1.3.6.1.4.1.2011.6.3.12.6.1

Refuse IPv6 table. The table is used to configure the address segment
(under a specified protocol) with which the user cannot access the device.
This can prevent the invalid users from logging in to the device.
After …

Indexes

hwFirewallV6ProtocolType hwRefuseIpv6StartAddr

Column	Syntax	OID
hwRefuseIpv6StartAddr Start IPv6 address of one record in refuse IPv6 table. The IPv6 address in the new record of the table must be valid. The record in which the start address is the same as the existing one cannot be added to the table.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2011.6.3.12.6.1.1
hwRefuseIpv6EndAddr End IPv6 address of one record in refuse IPv6 table. The IPv6 address in the new record of the table must be valid, that is. The record in which the end address is smaller than the start address cannot be added and eac…	IPV6-TCIpv6Addressr/w Type Constraints: range: 16	.1.3.6.1.4.1.2011.6.3.12.6.1.2
hwRefuseIpv6RowStatus Operation status of row. The specified protocol type and the start and end addresses in the start address rejecting table can be modified. createAndGo(4) is supplied to create a new instance of a conceptual row. dest…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.3.12.6.1.3

Sysman source interface table.
The table is used to configure the source interfaces under the protocols 
such as SNMP trap, TFTP, FTP, SFTP, Telnet, Ping and Tracert.
The addresses of the Loopback, meth and VLANIF interfaces can be used as 
the source addresses from which the system sends packets.
The system uses the bound interface address as the source address to send 
the protocol packet. The index of this table is hwSysManProtocolType.

hwSysManSourceInterfaceEntry row .1.3.6.1.4.1.2011.6.3.19.1.1

Sysman source interface table.
The table is used to configure the source interfaces under the protocols
such as SNMP trap, TFTP, FTP, SFTP, Telnet, Ping and Tracert.
The addresses of the Loopback, meth and VLANIF inter…

Indexes

hwSysManProtocolType

Column	Syntax	OID
hwSysManProtocolType Application-layer packet type. Options: 1. trap(1) -indicates the trap packet. 2. syslog(2) -indicates the syslog packet. 3. tftp(3) -indicates the tftp packet. 4. ftp(4) -indicates the ftp packet. 5. sftp(5)…	Enumeration Enumerated Values: 1 trap 2 syslog 3 tftp 4 ftp 5 sftp 6 telnet 7 ping 8 tracert 9 license 10 stelnet 11 ipdr 12 tftpproxy	.1.3.6.1.4.1.2011.6.3.19.1.1.1
hwSourceInterfaceType Source interface type, which is used with the interface number to determine the interface from which packets are sent. Options: 1. auto(1) -indicates the function of automatically searching for th…	Enumerationr/w Enumerated Values: 1 auto 2 loopback 3 meth 4 vlanif	.1.3.6.1.4.1.2011.6.3.19.1.1.2
hwSourceInterfaceNumber Source interface number, which is the interface number under the source interface type object and is used with the interface type to determine the interface from which packets are sent. The hwSourceInterfaceNumber v…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.3.19.1.1.3
hwSourceInterfaceIPAddress Source interface ip address, which is the ip address set by user directly for the the source interface type object. Currently this node is only used for tftp-proxy,which means other protocol doesn't support this operati…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.3.19.1.1.4
hwSourceIPv6Address Source interface ipv6 address, which is the ipv6 address set by user directly for the source interface type object. Currently this node is used for tftp, ftp, sftp, telnet, stelnet, trap, syslog.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2011.6.3.19.1.1.5