HUAWEI-MINM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
15
Rows
15
Columns
125

hwMinMMacTnlCfgTable

table
.1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2 · 1 row entry · 16 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMinMMacTnlCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MINM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MINM-MIB::hwMinMMacTnlCfgTable' 
Indicates a configuration information table of Mac-tunnel.
hwMinMMacTnlCfgEntry row .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1
Indicates the entry in the tunnel configuration table of the mac-tunnel.
Indexes
Column Syntax OID
hwMinMMacTnlIndex
Indicates the index of Mac Tunnel. It begins with one.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.1
hwMinMMacTnlName
Indicates the name of the mac-tunnel.
It is a character string with a maximum of 31 bytes and a minimum of 1 byte.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.11
hwMinMMacTnlDMac
Indicates the remote MAC address of the current mac-tunnel.
By default, there is no such configuration.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.12
hwMinMMacTnlBVlanID
Indicates BVLAN value of the current BVLAN used by the mac-tunnel: It ranges from 1 to 4094. By default, BVLAN value is not configured.
The VLAN here must have been created and be in the backbone VLAN used by the mac-tu…
Q-BRIDGE-MIBVlanIdOrNoner/w
Type Constraints:
range: 0..4094
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.13
hwMinMMacTnlBVlanType
Indicates the B-TAG type of the BVLAN. By default, it is 88a8.
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.14
hwMinMMacTnlPriorityValue
Indicates priority level of the mac-tunnel.
It is used to set the priority field of B-TAG.
There are eight priority levels. By default, the I-TAG priority is used.
The special value of eight is used to indicate that pr…
Integer32r/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.15
hwMinMMacTnlOutgoingIfIndex
Indicates the port used in the mac-tunnel. By default, it is not configured.
The value zero is used to indicate that interface was unknown or none.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.16
hwMinMMacTnlSplitHorizonEnable
Indicates the split horizon of tunnels. By default, it is enabled.
When split horizon is enabled on two mac-tunnels, the two tunnels cannot exchange packets.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.17
hwMinMMacTnlAdminStatus
Indicates the administration status of the mac-tunnel.
HWAdminStatusr/w
Type Values:
1up
2down
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.18
hwMinMMacTnlOperStatus
Indicates the physical state of the mac-tunnel.
HWOperStatus
Type Values:
1up
2down
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.19
hwMinMMacTnlDescription
Indicates descriptive information of the static Mac-In-Mac tunnel.
Its length ranges from 1 to 80 bytes and the first byte cannot be a space.
OctetStringr/w
Constraints:
range: 1-80
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.20
hwMinMMacTnlStatisticsReset
Indicates the reset on traffic statistics of the mac-tunnel.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.21
hwMinMMacTnlPriorityTrustITag
Indicates that the I-TAG priority is copied to the mac-tunnel.
By default, the I-TAG priority is not copied to the mac-tunnel.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.22
hwMinMMacTnlDeiTrustIDei
Indicates that the I-DEI priority is copied to the mac-tunnel.
By default, the I-DEI priority is not copied to the mac-tunnel.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.23
hwMinMMacTnlDeiValue
Indicates DEI of the mac-tunnel. It is used to set the DEI field of B-TAG.
When DEI is true, the value is set to 1.
When DEI is false, the value is set to 0.
By default, the I-DEI priority is not copied to the mac-tu…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.24
hwMinMMacTnlRowStatus
Indicates the RowStatus.
The following three actions are used: active, createAndGo, destroy
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.51

hwMinMMacTnlStatisticsTable

table
.1.3.6.1.4.1.2011.5.25.133.1.1.2.1.3 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMinMMacTnlStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MINM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MINM-MIB::hwMinMMacTnlStatisticsTable' 
Indicates a query for the hwMinMMacTnlStatisticsTable of the mac-tunnel.
hwMinMMacTnlStatisticsEntry row .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.3.1
Indicates an entry query for the hwMinMMacTnlStatisticsTable of the mac-tunnel.
Indexes
Column Syntax OID
hwMinMMacTnlInPackets
Indicates the number of packets received by the mac-tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.3.1.11
hwMinMMacTnlInBytes
Indicates the number of bytes received by the mac-tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.3.1.12
hwMinMMacTnlOutPackets
Indicates the number of packets sent by the mac-tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.3.1.13
hwMinMMacTnlOutBytes
Indicates the number of bytes sent by the mac-tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.3.1.14

hwMacTnlNameToIndexMappingTable

table
.1.3.6.1.4.1.2011.5.25.133.1.1.2.1.4 · 1 row entry · 2 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMacTnlNameToIndexMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MINM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MINM-MIB::hwMacTnlNameToIndexMappingTable' 
Indicates the mapping table of the tunnel name and tunnel index.
hwMacTnlNameToIndexMappingEntry row .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.4.1
Indicates the mapping table entry of the tunnel name and tunnel index.
Indexes
Column Syntax OID
hwMacTnlName
Indicates the name of the mac-tunnel.
It is a character string with a maximum of 31 bytes and a minimum of 1 byte.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.4.1.1
hwMacTnlIndex
Indicates the tunnel index.It begins with one.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.4.1.11

hwMinMMacTnlCCTable

table
.1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMinMMacTnlCCTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MINM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MINM-MIB::hwMinMMacTnlCCTable' 
Indicates the parameters used to describe CC packets.
hwMinMMacTnlCCEntry row .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1.1
Indicates the CC table entry.
Indexes
Column Syntax OID
hwMinMMacTnlCfmEnable
Indicates that CFM is enabled.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1.1.11
hwMinMMacTnlCCInterval
Indicates the time interval of CC packets.
HwDot1agCfmCcmIntervalr/w
Type Values:
1intervalInvalid
2interval300Hz
3interval10ms
4interval100ms
5interval1s
6interval10s
7interval1min
8interval10min
9interval20ms
10interval30ms
11interval50ms
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1.1.12
hwMinMMacTnlSomeRMepCcmDefect
Indicates a connectivity failure of tunnels.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1.1.13
hwMinMMacTnlSomeRdiDefect
Indicates whether the RDI packet from the remote end is received.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1.1.14
hwMinMMacTnlCcReceiveEnabled
Whether CC reception is enabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1.1.15
hwMinMMacTnlCCRowStatus
Indicates the row status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1.1.51

hwMinMMacTnlLbTable

table
.1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2 · 1 row entry · 8 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMinMMacTnlLbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MINM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MINM-MIB::hwMinMMacTnlLbTable' 
Indicates the parameters used to describe Lb packets.
hwMinMMacTnlLbEntry row .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1
Indicates the loopback table entry.
Indexes
Column Syntax OID
hwMinMMacTnlLbmEnable
Indicates that the MAC Ping is started inside the tunnel.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.11
hwMinMMacTnlLbmTimeStamp
Indicates the operation time.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.12
hwMinMMacTnlLbmTimeOut
Indicates the timeout period entered by a user, in ms. By default, it is 2000.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.13
hwMinMMacTnlLbmTimes
Indicates the number of times that Ping is entered.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.14
hwMinMMacTnlLbmSize
Indicates the size of an Lbm packet.
Integer32r/w
Constraints:
range: 64-1480
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.15
hwMinMMacTnlLbrIn
Indicates the number of valid LBR packets received
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.16
hwMinMMacTnlLbmResult
Whether the MAC ping operation for a tunnel is over.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.17
hwMinMMacTnlLbRowStatus
Indicates the row status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.51

hwMinMMacTnlLbResultTable

table
.1.3.6.1.4.1.2011.5.25.133.1.1.2.2.3 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMinMMacTnlLbResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MINM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MINM-MIB::hwMinMMacTnlLbResultTable' 
Performance statistics returned by using the MAC ping command for a tunnel.
hwMinMMacTnlLbResultEntry row .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.3.1
Indicates the loopback table entry.
Indexes
Column Syntax OID
hwMinMMacTnlMacPingRTTMin
The minimum round trip time.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.3.1.11
hwMinMMacTnlMacPingRTTMax
The maximum round trip time.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.3.1.12
hwMinMMacTnlMacPingRTTAvg
The average round trip time.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.3.1.13
hwMinMMacTnlMacPingPacketLossRatio
The packet loss ratio.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.3.1.14

hwMinMMacTnlLtmTable

table
.1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4 · 1 row entry · 9 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMinMMacTnlLtmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MINM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MINM-MIB::hwMinMMacTnlLtmTable' 
Indicates the parameters used to describe Ltm packets.
hwMinMMacTnlLtmEntry row .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1
Indicates the linktrace table entry.
Indexes
Column Syntax OID
hwMinMMacTnlLtmEnable
Indicates that the MAC Trace is started inside the tunnel.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.11
hwMinMMacTnlLtmTimeStamp
The time stamp for enabling the MAC trace operation for a tunnel.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.12
hwMinMMacTnlLtmTimeOut
Indicates the timeout period entered by a user, in ms. By default, it is 2000.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.13
hwMinMMacTnlLtmTtl
Indicates the living cycle of Ltm packets.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.14
hwMinMMacTnlLtmFlags
The flags field of an LTM packet.
Bits
Enumerated Values:
0useFDBonly
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.15
hwMinMMacTnlLtmSeqNumber
The sequence number of an LTM packet.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.16
hwMinMMacTnlLtmEgressIdentifier
Indicates the egress ID of Ltm packets.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.17
hwMinMMacTnlLtmResult
Two conditions are used to determine whether the MAC trace operation to a tunnel is over: (1) The peer of a tunnel has been traced. (2) The preset timer for timeout is triggered.
Either condition indicates the completio…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.18
hwMinMMacTnlLtmRowStatus
Indicates the row status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.51

hwMinMMacTnlLtrTable

table
.1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5 · 1 row entry · 15 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMinMMacTnlLtrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MINM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MINM-MIB::hwMinMMacTnlLtrTable' 
Indicates the parameters used to describe Ltr packets.
hwMinMMacTnlLtrEntry row .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1
Indicates the linktraceRelay table entry.
Indexes
Column Syntax OID
hwMinMMacTnlLtrSeqNumber
Indicates the parameters used to describe Ltr packets.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.1
hwMinMMacTnlLtrReceiveOrder
An index to distinguish among multiple LTRs with the same LTR
Transaction Identifier field value.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.2
hwMinMMacTnlLtrTtl
TTL field value for a returned LTR.
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.11
hwMinMMacTnlLtrForwarded
Indicates an identifier that shows whether the LTM packet should be forwarded to the next hop.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.12
hwMinMMacTnlLtrLastEgressIdentifier
LTR packet is a response packet to a LTM packet.
The LTM packet is the last packet sent by a port on a device.
This variable indicates the port identifier of the LTM packet.
The last six bytes indicate the MAC addres…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.13
hwMinMMacTnlLtrNextEgressIdentifier
If the LTM packet needs to be forwarded to the next hop, the port identifier of the next hop should be added to the TVL field in the response LTR packet. The last six bytes indicate the MAC address, and the first two by…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.14
hwMinMMacTnlLtrRelay
Indicates the value in the Relay Action field.
HwDot1agCfmRelayActionFieldValue
Type Values:
1rlyHit
2rlyFdb
3rlyMpdb
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.15
hwMinMMacTnlLtrIngress
The value returned in the Ingress Action Field of the LTM.
HwDot1agCfmIngressActionFieldValue
Type Values:
1ingOk
2ingDown
3ingBlocked
4ingVid
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.16
hwMinMMacTnlLtrIngressMac
MAC address returned in the ingress MAC address field.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.17
hwMinMMacTnlLtrIngressPortIdSubtype
Format of the Ingress Port ID.
HwLldpPortIdSubtype
Type Values:
1interfaceAlias
2portComponent
3macAddress
4networkAddress
5interfaceName
6agentCircuitId
7local
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.18
hwMinMMacTnlLtrIngressPortId
Ingress Port ID. The format of this object is determined by
the value of the dot1agCfmLtrIngressPortIdSubtype object.
HwLldpPortId
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.19
hwMinMMacTnlLtrEgress
The value returned in the Egress Action Field of the LTM.
HwDot1agCfmEgressActionFieldValue
Type Values:
1egrOK
2egrDown
3egrBlocked
4egrVid
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.20
hwMinMMacTnlLtrEgressMac
MAC address returned in the egress MAC address field.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.21
hwMinMMacTnlLtrEgressPortIdSubtype
Format of the egress Port ID.
HwLldpPortIdSubtype
Type Values:
1interfaceAlias
2portComponent
3macAddress
4networkAddress
5interfaceName
6agentCircuitId
7local
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.22
hwMinMMacTnlLtrEgressPortId
Egress Port ID. The format of this object is determined by
the value of the dot1agCfmLtrEgressPortIdSubtype object.
HwLldpPortId
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.23

hwMinMMacTnlApsCfgTable

table
.1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1 · 1 row entry · 13 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMinMMacTnlApsCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MINM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MINM-MIB::hwMinMMacTnlApsCfgTable' 
Indicates the configuration table for the Aps protection of the mac-tunnel.
hwMinMMacTnlApsCfgEntry row .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1
Indicates the configuration table entry for the Aps protection of the mac-tunnel.
Indexes
Column Syntax OID
hwMinMProtectMacTnlIndex
Indicates the index of ProtectMacTunnel. It begins with one.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.11
hwMinMProtectMacTnlName
Indicates the tunnel name of the protective mac-tunnel.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.12
hwMinMProtectMacTnlDMac
Indicates the remote MAC address of the protecting mac-tunnel.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.13
hwMinMProtectMacTnlBVlanID
Indicates BVLAN value used by the protecting mac-tunnel: It ranges from 1 to 4094.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.14
hwMinMProtectApsSwitchMode
Indicates the protection modes of the G.8031 Aps protection group of mac-tunnels.
oneplusonebidirectional(1): 1 + 1 switchover protection modes on both ends
oneplusoneunidirectional(2): 1 + 1 switchover protection modes…
HWProtectModer/w
Type Values:
1onePlusOneBidirectional
2onePlusOneUnidirectional
3oneToOne
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.15
hwMinMProtectProtocolApsEnable
Indicates that the G.8031 protocol of Aps protection group in the mac-tunnel is enabled.
By default, the protocol is disabled.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.16
hwMinMProtectApsFastInterval
Indicates the configuration of fast sending time interval for each protection group.
The time intervals for fast sending of Aps packets described in the G.8031 are as follows:
By default, the time interval for fast send…
HWApsIntervalr/w
Type Values:
1apsInterval3dot3ms
2apsInterval5ms
3apsInterval10ms
4apsInterval15ms
5apsInterval20ms
6apsInterval30ms
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.17
hwMinMProtectHoldoffTime
Indicates the switchover restoration time of Aps protection groups in the mac-tunnel, in 100 ms.
It ranges from 0 to 100.
By default, the switchover restoration time is not delayed. The value of delay is zero.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.18
hwMinMProtectRevMode
Indicates the non-restoration protection switchover mode of Aps protection group in mac-tunnels.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.19
hwMinMProtectRevWtrTime
Indicates the restoration time of restoration protection switchover mode of Aps protection group in mac-tunnels.
By default, the switchover mode is restoration. The restoration time is five minutes.
Integer32r/w
Constraints:
range: 0-120
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.20
hwMinMProtectSwitchOperation
Indicates the switchover commands for the Aps protection group of mac-tunnels.
The priority levels in a descending order are: clear, lock, force and manual.
clear(1): clears the lock, force and manual commands, and WTR …
HWSwitchOperationr/w
Type Values:
1clear
2lock
3force
4manual
5null
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.21
hwMinMProtectProtocol
Indicates the protection protocol of the protection group of mac-tunnels.
ProtocolAPS(1): use an APS protocol to enhance the protection switching.
ProtocolOAM(2): not using any APS protocol to enhance the protection swi…
HWProtectProtocolr/w
Type Values:
1protocolAps
2protocolOam
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.22
hwMinMProtectRowStatus
Indicates the RowStatus.
The following three actions are used: active, createAndGo, destroy
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.51

hwMinMSICfgTable

table
.1.3.6.1.4.1.2011.5.25.133.1.1.3.2 · 1 row entry · 27 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMinMSICfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MINM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MINM-MIB::hwMinMSICfgTable' 
Indicates the configuration table of a service instance.
hwMinMSICfgEntry row .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1
Indicates the configuration table entry of a service instance.
Indexes
Column Syntax OID
hwMinMSIIndex
Indicates the Index of Service Instance.It begins with one.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.1
hwMinMSIID
Indicates the ID of a service instance. It can be any value within 24 bits.
By default, the value is null.
One ID can be configured to one service instance only.
Integer32r/w
Constraints:
range: 0-16777216
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.11
hwMinMSIName
Indicates the name of a service instance.
It is a character string with a maximum of 31 bytes and a minimum of 1 byte.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.12
hwMinMSIServiceType
Indicates the type of a service instance as follows:
p2p: indicates the type of a point-to-point service instance.
mp2mp: indicates the type of a multi-point to multi-point service instance.
By default, the service type…
HWServiceTyper/w
Type Values:
1p2p
2mp2mp
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.13
hwMinMSIPriorityTrust8021p
Indicates that the priority of user packet based on 802.1Q is trusted.
By default, no user priority is trusted.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.14
hwMinMSIPriorityValue
Indicates priority level of a service instance.
It is used to set the priority field of I-TAG.
By default, no user priority is trusted and the priority is zero.
The special value of eight is used to indicate that prior…
Integer32r/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.15
hwMinMSIInterfaceType
Indicates the interface type of a service instance.
transparent: indicates the transparent transmission mode.
one-to-one: indicates the one-to-one in the s-tagged mode.
bundling: indicates the bundling in the s-tagged m…
HWInterfaceTyper/w
Type Values:
1transparent
2oneToOne
3bundling
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.16
hwMinMSIAdminStatus
Indicates the administration status of a service instance.
HWAdminStatusr/w
Type Values:
1up
2down
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.17
hwMinMSIOperStatus
Indicates the physical status of a service instance.
HWOperStatus
Type Values:
1up
2down
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.18
hwMinMSIMacLearningEnable
Disable the MAC learning of a service instance. By default, the MAC learning is enabled.
This object applies to the service instance of mp2mp only.
It is invalid in the service type of p2p.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.19
hwMinMSIMacLimitAction
Indicates MAC learning restriction of a service instance.
After the number of MAC address entries reaches the limit, the system takes the following actions:
discard: indicates that packets with new MAC address are disca…
HWProcessBehaviorr/w
Type Values:
1discard
2forward
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.20
hwMinMSIMacLimitAlarm
Indicates MAC learning restriction of a service instance.
Indicates whether alarm should be sent after the number of MAC address entries reaches the limit as follows:
disable: indicates no alarm is sent.
enable: indicat…
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.21
hwMinMSIMacLimitMaxinum
Indicates MAC learning restriction of a service instance.
The number of MAC addresses that can be learnt by the current service instance ranges from 0 to 131072.
When the number is set to zero, no restriction is imposed…
Integer32r/w
Constraints:
range: 0-131072
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.22
hwMinMSIL2CtrlProProcess
This configuration is unsuitable for the case of port+vlan+cos mapping. Layer 2 control packets of a service instance are handled as follows: By default, all layer 2 control packets are transmitted transparently and all…
Bitsr/w
Enumerated Values:
0all
1stp
2lldp
3lacp
4dot3ah
5dot1ag
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.23
hwMinMSIUnknownUnicastEnbale
Indicates how a service instance processes an unknown unicast packet.
By default, the service instance is allowed to broadcast the unknown unicast packet.
This object applies to the mp2mp service instance only.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.24
hwMinMSIMulticastEnable
Indicates how a service instance processes an unknown multicast packet.
By default, the service instance is allowed to broadcast the unknown multicast packet.
This object applies to the mp2mp service instance only.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.25
hwMinMSIBroadcastEnable
Indicates how a service instance processes a broadcast packet.
By default, the service instance is allowed to forward the broadcast packet.
This object applies to the mp2mp service instance only.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.26
hwMinMSIDescription
Indicates descriptive information of a service instance.
Its length ranges from 1 to 80 bytes and the first byte cannot be a space.
OctetStringr/w
Constraints:
range: 1-80
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.27
hwMinMSIStatisticsEnable
Indicates that the traffic statistics is enabled on a service instance.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.28
hwMinMSIStatisticsReset
Indicates the reset on traffic statistics of a service instance.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.29
hwMinMSIFcsTransparentEnable
The forwarded packets need to carry the CRC mark. By default, the forwarded packets do not carry the CRC mark.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.30
hwMinMSIIngressPriorityValue
Indicates the source priority of a service instance.
It is used to set the I-TAG priority field when packets are
encapsulated for transmission on the tunnel.
The source priority has eight levels that range from 0 to 7…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.31
hwMinMSIEgressPriorityTrustBTag
Indicates that the destination priority of a service
instance is copied from the B-TAG priority.
It is used to set whether the I-TAG priority is copied from the B-TAG
priority when packets reach the end of the tunnel…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.32
hwMinMSIIngressDeiValue
Indicates the source DEI of a service instance.
It is used to set the DEI field when packets are encapsulated for transmission
on the tunnel. When DEI is true, the value is set to 1.
When DEI is false, the value is s…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.33
hwMinMSIEgressDeiTrustBDei
Indicates that the destination DEI of a service instance
is copied from the B-DEI priority.
It is used to set whether the DEI of I-TAG is coped from B-DEI
when packets reach the end of the tunnel and are decpasulated…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.34
hwMinMSIIsolateAll
Indicates that all the mapping users of a service instance are isolated. By default, the isolation is disabled. This object applies to the service instance of mp2mp only. It is invalid in the service type of p2p.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.35
hwMinMSIRowStatus
Indicates the RowStatus.
The following three actions are used: active, createAndGo, destroy
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.51

hwMinMSIMappingTable

table
.1.3.6.1.4.1.2011.5.25.133.1.1.3.3 · 1 row entry · 7 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMinMSIMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MINM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MINM-MIB::hwMinMSIMappingTable' 
Indicates the configuration table of a service instance user.
hwMinMSIMappingEntry row .1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1
Indicates the configuration table entry of a service instance user.
Indexes
Column Syntax OID
hwMinMSIMappingIfIndex
The port that is mapped to the current service instance. If the value is 0, it means that port mapping is not supported.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1.1
hwMinMSIMappingVlanPriority
The priority of a user's packets that are mapped to the current service instance. If the value is 8, it means that the priority mapping is not supported.
Integer32
Constraints:
range: 0-8
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1.2
hwMinMSIMappingGlobalVlanID
The global VLAN ID that is mapped to the current service instance. If the value is 0, it means that the global VLAN mapping is not supported.
Q-BRIDGE-MIBVlanIdOrNone
Type Constraints:
range: 0..4094
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1.3
hwMinMSIMappingVlanListLow
Indicates the VLAN ID starting value of a service instance user.
OctetStringr/w
Constraints:
range: 256-256
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1.11
hwMinMSIMappingVlanListHigh
Indicates the VLAN ID ending value of a service instance user.
OctetStringr/w
Constraints:
range: 256-256
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1.12
hwMinMSIMappingUserIsolate
Indicates that the specified mapping user of a service instance is isolated. By default, the isolation is enabled. This object applies to the service instance of mp2mp only. It is invalid in the service type of p2p
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1.13
hwMinMSIMappingRowStatus
Indicates the RowStatus.
The following three actions are used: active, createAndGo, destroy
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1.51

hwMinMSIBindMacTnlTable

table
.1.3.6.1.4.1.2011.5.25.133.1.1.3.4 · 1 row entry · 2 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMinMSIBindMacTnlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MINM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MINM-MIB::hwMinMSIBindMacTnlTable' 
Indicates the mac-tunnel table bound with a service instance.
hwMinMSIBindMacTnlEntry row .1.3.6.1.4.1.2011.5.25.133.1.1.3.4.1
Indicates the mac-tunnel table entry bound with a service instance.
Indexes
Column Syntax OID
hwMinMSIBindMacTnlIndex
Indicates the index of Mac Tunnel. It begins with one.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.4.1.1
hwMinMSIBindMacTnlRowStatus
Indicates the RowStatus.
The following three actions are used: active, createAndGo, destroy
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.4.1.51

hwMinMSIStatisticsTable

table
.1.3.6.1.4.1.2011.5.25.133.1.1.3.5 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMinMSIStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MINM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MINM-MIB::hwMinMSIStatisticsTable' 
Indicates the hwMinMSIStatisticsTable of a service instance.
hwMinMSIStatisticsEntry row .1.3.6.1.4.1.2011.5.25.133.1.1.3.5.1
Indicates the hwMinMSIStatisticsTable entry of a service instance.
Indexes
Column Syntax OID
hwMinMSIInPackets
Indicates the number of packets received by a user of the current service instance.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.5.1.11
hwMinMSIInBytes
Indicates the number of bytes received by a user of the current service instance.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.5.1.12
hwMinMSIOutPackets
Indicates the number of packets sent by a user of the current service instance.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.5.1.13
hwMinMSIOutBytes
Indicates the number of bytes sent by a user of the current service instance.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.5.1.14

hwMinMSIStaticMacFwdTable

table
.1.3.6.1.4.1.2011.5.25.133.1.1.3.6 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMinMSIStaticMacFwdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MINM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MINM-MIB::hwMinMSIStaticMacFwdTable' 
Indicates the static MAC forwarding table of a service instance:
hwMinMSIStaticMacFwdEntry row .1.3.6.1.4.1.2011.5.25.133.1.1.3.6.1
Indicates the static MAC forwarding table entry of a service instance:
Indexes
Column Syntax OID
hwMinMSIStaticMacFwdCDMac
Indicates the destination MAC address of a customer.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.6.1.1
hwMinMSIStaticMacFwdMacTnlName
Indicates the name of the mac-tunnel.
It is a character string with a maximum of 31 bytes and a minimum of 1 byte.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.6.1.11
hwMinMSIStaticMacFwdOutgoingIfIndex
Indicates a outbound port.
The value zero is used to indicate that interface was unknown or none.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.6.1.12
hwMinMSIStaticMacFwdVlanID
Indicates the downstream vlanid.
The special value of zero is used to indicate that no VLAN-ID is present or used.
Q-BRIDGE-MIBVlanIdOrNoner/w
Type Constraints:
range: 0..4094
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.6.1.13
hwMinMSIStaticMacFwdType
Indicates the type of the static MAC forwarding table of a service instance:
static(1): indicates a static entry.
blackhole(2): indicates a blackhole entry.
HWStaticMacFwdTyper/w
Type Values:
1static
2blackhole
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.6.1.14
hwMinMSIStaticMacFwdRowStatus
Indicates the RowStatus.
The following three actions are used: active, createAndGo, destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.6.1.51

hwSINameToIndexMappingTable

table
.1.3.6.1.4.1.2011.5.25.133.1.1.3.7 · 1 row entry · 2 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwSINameToIndexMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MINM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MINM-MIB::hwSINameToIndexMappingTable' 
Indicates the name and the index mapping table of a service instance.
hwSINameToIndexMappingEntry row .1.3.6.1.4.1.2011.5.25.133.1.1.3.7.1
Indicates the name and the index mapping table entry of a service instance.
Indexes
Column Syntax OID
hwSIName
Indicates the name of a service instance.
It is a character string with a maximum of 31 bytes and a minimum of 1 byte.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.7.1.1
hwSIIndex
Indicates the index of a service instance.It begins with one.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.7.1.11