HUAWEI-MFLP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
47

hwMflpVlanCfgTable

table
.1.3.6.1.4.1.2011.5.25.160.1.1 · 1 row entry · 13 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMflpVlanCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MFLP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MFLP-MIB::hwMflpVlanCfgTable' 
The mac flapping table.The table that 
contains the mac flapping information 
currently operating in VLAN mode on this device.
hwMflpVlanCfgEntry row .1.3.6.1.4.1.2011.5.25.160.1.1.1
Entries of the mac flapping table in VLAN mode.
Indexes
Column Syntax OID
hwMflpVlanId
The VLAN ID referring to the VLAN which is correlative to the hwMflpVlanCfg table.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2011.5.25.160.1.1.1.1
hwMflpVlanCfgLoopTimes
The number of mac move-times.
Unsigned32r/w
Constraints:
range: 3-1000
 .1.3.6.1.4.1.2011.5.25.160.1.1.1.2
hwMflpVlanCfgDetectCycle
The interval of detecting the mac move-times.
Unsigned32r/w
Constraints:
range: 3-30
 .1.3.6.1.4.1.2011.5.25.160.1.1.1.3
hwMflpVlanCfgCycles
The number of interval.
Unsigned32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.2011.5.25.160.1.1.1.4
hwMflpVlanCfgAction
The action switch of this entry. The meanings of
the values are:
block(1), alarmOnly(2)
Enumerationr/w
Enumerated Values:
1block
2alarmOnly
 .1.3.6.1.4.1.2011.5.25.160.1.1.1.5
hwMflpVlanCfgBlockTime
The blocked time of the interface.
When the value of hwMflpAction is 1, value of hwMflpBlockTime should be
between 10 and 65535.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.5.25.160.1.1.1.6
hwMflpVlanCfgRetryTimes
The retry times of permanent interdiction.
Unsigned32r/w
Constraints:
range: 0-5
 .1.3.6.1.4.1.2011.5.25.160.1.1.1.7
hwMflpVlanCfgIfName
The interface name, only used for trap.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.5.25.160.1.1.1.8
hwMflpVlanCfgAlarmReason
The alarm reason, only used for trap.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.5.25.160.1.1.1.9
hwMflpVlanCfgRowstatus
The operating state of the row.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.160.1.1.1.10
hwMflpVlanDetectMAC
The detect MAC, only used for trap.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.5.25.160.1.1.1.11
hwMflpVlanCfgMacAddr
The MAC address, only used for trap.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2011.5.25.160.1.1.1.12
hwMflpVlanCfgPreIfName
The interface name, only used for trap.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.5.25.160.1.1.1.13

hwMflpVsiCfgTable

table
.1.3.6.1.4.1.2011.5.25.160.1.2 · 1 row entry · 17 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMflpVsiCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MFLP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MFLP-MIB::hwMflpVsiCfgTable' 
The mac flapping table .The table that 
contains the mac flapping information 
currently operating in VSI mode on this device.
hwMflpVsiCfgEntry row .1.3.6.1.4.1.2011.5.25.160.1.2.1
Entries of The mac flapping table in VSI mode.
Indexes
Column Syntax OID
hwMflpVsiName
The VSI name referring to the VSI which is correlative to the hwMflpVsiCfg table.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.2011.5.25.160.1.2.1.1
hwMflpVsiCfgLoopTimes
The number of loop-times.
Unsigned32r/w
Constraints:
range: 3-1000
 .1.3.6.1.4.1.2011.5.25.160.1.2.1.2
hwMflpVsiCfgDetectCycle
The interval of detecting the loop-times.
Unsigned32r/w
Constraints:
range: 3-30
 .1.3.6.1.4.1.2011.5.25.160.1.2.1.3
hwMflpVsiCfgCycles
The number of detect-cycle.
Unsigned32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.2011.5.25.160.1.2.1.4
hwMflpVsiCfgAction
The action switch of this entry. The meanings of
the values are:
block(1), alarmOnly(2)
Enumerationr/w
Enumerated Values:
1block
2alarmOnly
 .1.3.6.1.4.1.2011.5.25.160.1.2.1.5
hwMflpVsiCfgBlockTime
The blocked time of the interface .
When the value of hwMflpAction is 1, value of hwMflpBlockTime should be
between 10 and 65535.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.5.25.160.1.2.1.6
hwMflpVsiCfgRetryTimes
The retry times of permanent interdiction.
Unsigned32r/w
Constraints:
range: 0-5
 .1.3.6.1.4.1.2011.5.25.160.1.2.1.7
hwMflpVsiCfgBlockPolicy
The block policy switch of this entry. The meanings of
the values are:
default(1), acFirst(2), pwFirst(3), acOnly(4)
Enumerationr/w
Enumerated Values:
1default
2acFirst
3pwFirst
4acOnly
 .1.3.6.1.4.1.2011.5.25.160.1.2.1.8
hwMflpVsiCfgAcName
The AC interface name, only used for trap.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.5.25.160.1.2.1.9
hwMflpVsiCfgAlarmReason
The alarm reason, only used for trap.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.5.25.160.1.2.1.10
hwMflpVsiCfgIpAddr
The peer IP address, only used for trap.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.160.1.2.1.11
hwMflpVsiCfgPwId
The PW ID, only used for trap.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.160.1.2.1.12
hwMflpVsiCfgRowstatus
The operating state of the row.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.160.1.2.1.13
hwMflpVsiDetectMAC
The detect MAC, only used for trap.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.5.25.160.1.2.1.14
hwMflpLinkBlkedIfName
MAC-Flapping association, only used for trap.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.5.25.160.1.2.1.15
hwMflpVsiCfgAcNameEx1
The AC interface name, only used for trap.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.5.25.160.1.2.1.16
hwMflpVsiCfgAcNameEx2
The AC interface name, only used for trap.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.5.25.160.1.2.1.17

hwMflpBdCfgTable

table
.1.3.6.1.4.1.2011.5.25.160.1.3 · 1 row entry · 10 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMflpBdCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MFLP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MFLP-MIB::hwMflpBdCfgTable' 
The mac flapping table .The table that 
contains the mac flapping information 
currently operating in Bd mode on this device.
hwMflpBdCfgEntry row .1.3.6.1.4.1.2011.5.25.160.1.3.1
Entries of The mac flapping table in Bd mode.
Indexes
Column Syntax OID
hwMflpBdIndex
The Bd ID referring to the BD which is correlative to the hwMflpBdCfg table.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.160.1.3.1.1
hwMflpBdCfgBlockTime
The blocked time of the interface in units of seconds.
When the value of hwMflpAction is 1, value of hwMflpBlockTime should be
between 10 and 65535.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.5.25.160.1.3.1.2
hwMflpBdCfgAcName
The AC interface name, only used for trap.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.5.25.160.1.3.1.3
hwMflpBdCfgAlarmReason
The alarm reason, only used for trap.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.5.25.160.1.3.1.4
hwMflpBdDetectMAC
The detect MAC, only used for trap.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.5.25.160.1.3.1.5
hwMflpBdCfgAcNameEx1
The AC interface name, only used for trap.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.5.25.160.1.3.1.6
hwMflpBdCfgAcNameEx2
The AC interface name, only used for trap.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.5.25.160.1.3.1.7
hwMflpBdCfgVsiName
The VSI name referring to the VSI which is correlative to the hwMflpBdCfgEntry table.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.2011.5.25.160.1.3.1.8
hwMflpBdCfgIpAddr
The peer IP address, only used for trap.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.160.1.3.1.9
hwMflpBdCfgPwId
The PW ID, only used for trap.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.160.1.3.1.10

hwMacHopTrafficSuppressCfgTable

table
.1.3.6.1.4.1.2011.5.25.160.1.4 · 1 row entry · 7 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMacHopTrafficSuppressCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MFLP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MFLP-MIB::hwMacHopTrafficSuppressCfgTable' 
The mac flapping Traffic Suppress table .
The table that contains the mac flapping information 
        currently operating when brodcasting traffic suppress 
occuring on this device.
hwMacHopTrafficSuppressCfgEntry row .1.3.6.1.4.1.2011.5.25.160.1.4.1
Entries of The mac flapping Traffic Suppress table.
Indexes
Column Syntax OID
hwMacHopTrafficSuppressDomainType
The domain type, contains VSI and VLAN.
OctetString .1.3.6.1.4.1.2011.5.25.160.1.4.1.1
hwMacHopTrafficSuppressDomainName
The domain name, only used for trap.
OctetString .1.3.6.1.4.1.2011.5.25.160.1.4.1.2
hwMacHopTrafficSuppressIfName
The interface name, only used for trap.
OctetString .1.3.6.1.4.1.2011.5.25.160.1.4.1.3
hwMacHopTrafficSuppressCmdType
The command type, only used for trap.
OctetString .1.3.6.1.4.1.2011.5.25.160.1.4.1.4
hwMacHopTrafficSuppressCir
The traffic rate , only used for trap.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.160.1.4.1.5
hwMacHopTrafficSuppressPeerIp
The peer device IP in VSI mode, only used for trap.
OctetString .1.3.6.1.4.1.2011.5.25.160.1.4.1.6
hwMacHopTrafficSuppressVcLabel
The VC label in VSI mode, only used for trap.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.160.1.4.1.7