HUAWEI-LswRSTP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
21

hwdot1dStpPortXTable

table
.1.3.6.1.4.1.2011.2.23.1.6.1.5 · 1 row entry · 19 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk hwdot1dStpPortXTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-LswRSTP-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-LswRSTP-MIB::hwdot1dStpPortXTable' 
RSTP extended information of the port
hwdot1dStpPortXEntry row .1.3.6.1.4.1.2011.2.23.1.6.1.5.1
RSTP extended information of the port
Indexes
No indexes recorded
Column Syntax OID
hwdot1dStpPortStatus
RSTP status of the port
EnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.1
hwdot1dStpPortEdgeport
Whether the port can be an edge port
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.2
hwdot1dStpPortPointToPoint
It is the administrative value indicates whether the port
can be connected to a point-to-point link or not.

If the value is 'auto', the operative value of a point-to-point link state is
determined by devi…
Enumerationr/w
Enumerated Values:
1forceTrue
2forceFalse
3auto
 .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.3
hwdot1dStpMcheck
Check if the port transfer state machine enters
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.4
hwdot1dStpTransLimit
Packet transmission limit of the bridge in a duration of Hello Time.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.5
hwdot1dStpRXStpBPDU
Number of STP BPDU received
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.6
hwdot1dStpTXStpBPDU
Number of STP BPDU transmitted
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.7
hwdot1dStpRXTCNBPDU
Number of TCN BPDU received
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.8
hwdot1dStpTXTCNBPDU
Number of TCN BPDU transmitted
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.9
hwdot1dStpRXRSTPBPDU
Number of RSTP BPDU received
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.10
hwdot1dStpTXRSTPBPDU
Number of RSTP BPDU transmitted
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.11
hwdot1dStpClearStatistics
Clear RSTP statistics. Read operation not supported.
Enumerationr/w
Enumerated Values:
1clear
 .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.12
hwdot1dSetStpDefaultPortCost
Set PathCost back to the default setting. Read operation not supported.
Enumerationr/w
Enumerated Values:
1enable
 .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.13
hwdot1dStpRootGuard
If the port guard root bridge. Other bridge which want to be root can not become root through this port if enabled.
EnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.14
hwdot1dStpLoopGuard
Loop guard function that keep a root port or an alternate port in discarding state while the information on the port is aged out.
EnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.15
hwdot1dStpPortBlockedReason
Record the block reason of the port.
notBlock (1) means that the port is not in block state,.
blockForProtocol (2) means that the port is blocked by stp protocol to avoid loop.
blockForRootGuard(3) means that th…
Enumeration
Enumerated Values:
1notBlock
2blockForProtocol
3blockForRootGuard
4blockForBPDUGuard
5blockForLoopGuard
 .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.16
hwdot1dStpRXTCBPDU
The number of received TC BPDUs
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.17
hwdot1dStpPortSendingBPDUType
Type of BPDU which the port is sending.
Enumeration
Enumerated Values:
0stp
2rstp
 .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.18
hwdot1dStpOperPortPointToPoint
This object indicates whether the port
has connected to a point-to-point link or not.

The administrative value should be read from hwdot1dStpPortPointToPoint.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.19

hwdot1dStpIgnoredVlanTable

table
.1.3.6.1.4.1.2011.2.23.1.6.1.10 · 1 row entry · 2 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk hwdot1dStpIgnoredVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-LswRSTP-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-LswRSTP-MIB::hwdot1dStpIgnoredVlanTable' 
RSTP extended information of vlan
hwdot1dStpIgnoredVlanEntry row .1.3.6.1.4.1.2011.2.23.1.6.1.10.1
RSTP extended information of the vlan
Indexes
Column Syntax OID
hwdot1dVlan
Vlan id supported
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.2011.2.23.1.6.1.10.1.1
hwdot1dStpIgnore
Whether the vlan is stp Ignored
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.2.23.1.6.1.10.1.2