HUAWEI-LINE-MIB

HUAWEI-LINE-MIB is used to configure and query attributes of connections 
through management interfaces by users, such as the maximum number of Telnet 
connections and login information about users.

Imported Objects

hwDatacommHUAWEI-MIB
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUPSNMPv2-CONF
IpAddress, Integer32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPESNMPv2-SMI
RowStatusSNMPv2-TC

Objects

hwLineMIB .1.3.6.1.4.1.2011.5.25.207
hwLineObjects .1.3.6.1.4.1.2011.5.25.207.1
hwTelnetSet .1.3.6.1.4.1.2011.5.25.207.1.1
hwMaxVtyNumber .1.3.6.1.4.1.2011.5.25.207.1.1.1
hwLoginUserInfo .1.3.6.1.4.1.2011.5.25.207.1.2
hwLoginUserInfoTable .1.3.6.1.4.1.2011.5.25.207.1.2.1
hwLoginUserInfoEntry .1.3.6.1.4.1.2011.5.25.207.1.2.1.1
hwUserInfoIndex .1.3.6.1.4.1.2011.5.25.207.1.2.1.1.1
hwUserInfoName .1.3.6.1.4.1.2011.5.25.207.1.2.1.1.2
hwUserInfoIpAddr .1.3.6.1.4.1.2011.5.25.207.1.2.1.1.3
hwUserInfoChannel .1.3.6.1.4.1.2011.5.25.207.1.2.1.1.4
hwAuthType .1.3.6.1.4.1.2011.5.25.207.1.2.1.1.5
hwVpnInstName .1.3.6.1.4.1.2011.5.25.207.1.2.1.1.6
hwUserInterface .1.3.6.1.4.1.2011.5.25.207.1.3
hwUserInterfaceTable .1.3.6.1.4.1.2011.5.25.207.1.3.1
hwUserInterfaceEntry .1.3.6.1.4.1.2011.5.25.207.1.3.1.1
hwInterfaceType .1.3.6.1.4.1.2011.5.25.207.1.3.1.1.1
hwUserInterfaceIndex .1.3.6.1.4.1.2011.5.25.207.1.3.1.1.2
hwAuthenticationMode .1.3.6.1.4.1.2011.5.25.207.1.3.1.1.3
hwProtocol .1.3.6.1.4.1.2011.5.25.207.1.3.1.1.4
hwUserInterfaceRowStatus
.1.3.6.1.4.1.2011.5.25.207.1.3.1.1.5
hwVtyHostPermit .1.3.6.1.4.1.2011.5.25.207.1.4
hwVtyHostPermitTable .1.3.6.1.4.1.2011.5.25.207.1.4.1
hwVtyHostPermitEntry .1.3.6.1.4.1.2011.5.25.207.1.4.1.1
hwVtyHostPermitIndex .1.3.6.1.4.1.2011.5.25.207.1.4.1.1.1
hwVtyHostPermitIpAddress
.1.3.6.1.4.1.2011.5.25.207.1.4.1.1.2
hwVtyHostPermitMaskAddress
.1.3.6.1.4.1.2011.5.25.207.1.4.1.1.3
hwVtyHostPermitInformation .1.3.6.1.4.1.2011.5.25.207.1.4.1.1.4
hwVtyHostPermitRowState
.1.3.6.1.4.1.2011.5.25.207.1.4.1.1.5
hwLineMibTrapObjects .1.3.6.1.4.1.2011.5.25.207.1.5
hwUserInfoLoginFailedTimes .1.3.6.1.4.1.2011.5.25.207.1.5.1
hwUserInfoStatisticPeriod .1.3.6.1.4.1.2011.5.25.207.1.5.2
hwUserInfoIpAddress .1.3.6.1.4.1.2011.5.25.207.1.5.3
hwUserInfoVpnName .1.3.6.1.4.1.2011.5.25.207.1.5.4
hwCurrentVty .1.3.6.1.4.1.2011.5.25.207.1.5.5
hwMaxVty .1.3.6.1.4.1.2011.5.25.207.1.5.6
hwConAuthMode .1.3.6.1.4.1.2011.5.25.207.1.5.7
hwConSlot .1.3.6.1.4.1.2011.5.25.207.1.5.8
hwLineNotification .1.3.6.1.4.1.2011.5.25.207.2
hwLineConformance .1.3.6.1.4.1.2011.5.25.207.3
hwLineCompliances .1.3.6.1.4.1.2011.5.25.207.3.1
hwLineGroups .1.3.6.1.4.1.2011.5.25.207.3.2

Notifications/Traps

NameOIDDescription
hwVtyNumExceed

.1.3.6.1.4.1.2011.5.25.207.2.1
t indicates the alarm reported when the number of Telnet users reaches 
the maximum number of Telnet connections. In addition, the maximum number of 
Telnet connections is displayed.
hwSSHLoginFailedClear


.1.3.6.1.4.1.2011.5.25.207.2.10
When users failed to login ssh server too frequently, login fail times and statistics period are reported.
hwIpLocked



.1.3.6.1.4.1.2011.5.25.207.2.11
when the number of user login failures from the same IP address reaches the threshold, the trap of hwIpLocked is reported.
hwIpUnLocked


.1.3.6.1.4.1.2011.5.25.207.2.12
When the IP is unlocked, the trap of hwIpUnLocked is reported.
hwVtyExceed


.1.3.6.1.4.1.2011.5.25.207.2.13
When the number of available VTY channels was lower than or equal to the threshold value, an alarm is generated.
hwVtyExceedClear


.1.3.6.1.4.1.2011.5.25.207.2.14
When the number of available VTY channels is higher than or equal to the threshold value, the alarm is cleared.
hwConAuthModeIncomplete


.1.3.6.1.4.1.2011.5.25.207.2.15
When device startup and check console authentication mode that is not suit for first-login after upgrade, an event is generated.
hwUserLogin





.1.3.6.1.4.1.2011.5.25.207.2.2
r logs in through Telnet/Stelnet, the user name, IP address for login, 
used tunnel, authentication type and vpn name are reported.
hwUserLoginFail





.1.3.6.1.4.1.2011.5.25.207.2.3
r fails to log in through Telnet/Stelnet, the user name, IP address for login, 
used tunnel, authentication type and vpn name are reported.
hwUserLogout





.1.3.6.1.4.1.2011.5.25.207.2.4
r logs out of the Telnet/Stelnet server, the user name, IP address for logout, 
used tunnel, authentication type and vpn name are reported.
hwUserSshLogin





.1.3.6.1.4.1.2011.5.25.207.2.5
r logs in to SSH server, the user name, IP address for login, 
used tunnel, authentication type and vpn name are reported.
hwUserSshLogout





.1.3.6.1.4.1.2011.5.25.207.2.6
r logs out of the SSH server, the user name, IP address for logout, 
and used tunnel are reported.
hwTelnetLoginFailed


.1.3.6.1.4.1.2011.5.25.207.2.7
When users failed to login telnet server too frequently, login fail times and statistics period are reported.
hwSSHLoginFailed


.1.3.6.1.4.1.2011.5.25.207.2.8
When users failed to login ssh server too frequently, login fail times and statistics period are reported.
hwTelnetLoginFailedClear


.1.3.6.1.4.1.2011.5.25.207.2.9
When users failed to login telnet server too frequently, login fail times and statistics period are reported.