HUAWEI-LAG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
11

hwAggLinkTable

table
.1.3.6.1.4.1.2011.5.25.25.1.1 · 1 row entry · 7 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk hwAggLinkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-LAG-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-LAG-MIB::hwAggLinkTable' 
A table of aggregate link objects.
hwAggLinkEntry row .1.3.6.1.4.1.2011.5.25.25.1.1.1
Entry of table.
Indexes
Column Syntax OID
hwAggLinkNumber
The serial number of aggregation group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.25.1.1.1.1
hwAggLinkName
Aggregation name.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.5.25.25.1.1.1.2
hwAggLinkMode
Type of aggregation.
manual: Manual aggregation, no LACP.
static: Membership specified by user, LACP is
used to validate.
dynamic: Completely dynamic aggregation detected
by LACP.
Enumerationr/w
Enumerated Values:
1manual
2static
3dynamic
 .1.3.6.1.4.1.2011.5.25.25.1.1.1.3
hwAggLinkPortList
List of ports in this link aggregation group, by bridge port
number. If the mode of the link aggregation group is manual
or static, you can update this list to your
hearts content. However, if the link aggregation group…
Q-BRIDGE-MIBPortListr/w .1.3.6.1.4.1.2011.5.25.25.1.1.1.4
hwAggLinkState
RowStatus, now support three states:
createAndGo, active, destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.25.1.1.1.5
hwAggPortListSelectedPorts
A PortList of physical ports that have been
selected but not attached to this aggregator.
When the bit is set to 1,it means the
corresponding port is in the portlist.
Q-BRIDGE-MIBPortList .1.3.6.1.4.1.2011.5.25.25.1.1.1.6
hwAggPortListSamePartnerPorts
PortList of physical ports that have the
same Actor SystemID and partner systemID as
this aggregator, but have different actor
and partner keys of aggregator.
Q-BRIDGE-MIBPortList .1.3.6.1.4.1.2011.5.25.25.1.1.1.7

hwAggPortTable

table
.1.3.6.1.4.1.2011.5.25.25.1.2 · 1 row entry · 4 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk hwAggPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-LAG-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-LAG-MIB::hwAggPortTable' 
A table of aggregate port objects.
hwAggPortEntry row .1.3.6.1.4.1.2011.5.25.25.1.2.1
Entry of table.
Indexes
Column Syntax OID
hwAggPortIndex
Port ifindex which is according to RFC1213 MIB.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.25.1.2.1.1
hwAggPortNotAttachedReason
Reason why this port is selected for an
aggregator but not attached,
0: The port is attached to this aggregator.
1: The current number of active ports has
reached the upper limit.
2: All aggregation resources are alr…
Integer32r/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.2011.5.25.25.1.2.1.2
hwAggPortLacpState
Control ports' lacp enble or disable.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.25.1.2.1.3
hwAggPortNotAttachedString
The string which interprets this
port is selected for an aggregator
but not attached.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.5.25.25.1.2.1.4