Standard view Table view

HUAWEI-L2VPN-OAM-MIB

        The HUAWEI-L2VPN-OAM-MIB is used by L2VPN to report TP-OAM and MPLS OAM traps (including traps about PW connectivity, remote defect indication, and packet excess). The parameter of the MIB is accessible-for-notify, which cannot be modified.
Source file
HUAWEI-L2VPN-OAM-MIB
Last revised
Identity
hwL2vpnOamTrap
Base OID
1.3.6.1.4.1.2011.5.25.119.9
Imported Objects
HUAWEI-L2VPN-MIB hwL2Vpn
HUAWEI-MIB hwDatacomm
HUAWEI-VPLS-EXT-MIB HWL2VpnVcEncapsType
IF-MIB ifName InterfaceIndexOrZero
SNMPv2-CONF MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
Net-SNMP examples using the huawei MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'HUAWEI-L2VPN-OAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HUAWEI-L2VPN-OAM-MIB::hwL2vpnOamTrap'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-L2VPN-OAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-L2VPN-OAM-MIB::hwL2vpnOamTrap'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (19)
hwL2vpnOamTrap
.1.3.6.1.4.1.2011.5.25.119.9
hwL2vpnOamTrapMIBObjects
.1.3.6.1.4.1.2011.5.25.119.9.1
hwL2vpnServiceType
Enumeration
 .1.3.6.1.4.1.2011.5.25.119.9.1.1
hwL2vpnOutLabel
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.2011.5.25.119.9.1.10
hwL2vpnIfName
OctetString
 .1.3.6.1.4.1.2011.5.25.119.9.1.11
hwL2vpnVsiName
OctetString
 .1.3.6.1.4.1.2011.5.25.119.9.1.12
hwL2vpnOamType
Enumeration
 .1.3.6.1.4.1.2011.5.25.119.9.1.13
hwL2vpnProtocolType
Enumeration
 .1.3.6.1.4.1.2011.5.25.119.9.1.2
hwL2vpnVcID
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.2011.5.25.119.9.1.3
hwL2vpnVcType
HUAWEI-VPLS-EXT-MIBHWL2VpnVcEncapsType
 .1.3.6.1.4.1.2011.5.25.119.9.1.4
hwL2vpnPeerAddr
SNMPv2-SMIIpAddress
 .1.3.6.1.4.1.2011.5.25.119.9.1.5
hwL2vpnIfIndex
IF-MIBInterfaceIndexOrZero
 .1.3.6.1.4.1.2011.5.25.119.9.1.6
hwL2vpnPwMaster
Enumeration
 .1.3.6.1.4.1.2011.5.25.119.9.1.7
hwL2vpnRmtSiteID
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.2011.5.25.119.9.1.8
hwL2vpnInLabel
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.2011.5.25.119.9.1.9
hwL2vpnOamMIBTraps
.1.3.6.1.4.1.2011.5.25.119.9.2
hwL2vpnOamConformance
.1.3.6.1.4.1.2011.5.25.119.9.3
hwL2vpnOamMIBCompliances
.1.3.6.1.4.1.2011.5.25.119.9.3.1
hwL2vpnOamGroups
.1.3.6.1.4.1.2011.5.25.119.9.3.2
Dependencies (13) 6 direct · 7 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. HUAWEI-MIBhuawei
  3. SNMPv2-TCrfc
  4. IANAifType-MIBrfc
  5. SNMPv2-CONFrfc
  6. SNMPv2-MIBrfc
  7. IF-MIBrfc
  8. BRIDGE-MIBrfc
  9. P-BRIDGE-MIBrfc
  10. HUAWEI-L2VPN-MIBhuawei
  11. INET-ADDRESS-MIBrfc
  12. VRRP-MIBrfc
  13. HUAWEI-VPLS-EXT-MIBhuawei
  14. HUAWEI-L2VPN-OAM-MIBhuaweiselected
Conformance Groups (2)
hwL2vpnOamGroup
hwL2vpnServiceType hwL2vpnProtocolType hwL2vpnVcID hwL2vpnVcType hwL2vpnPeerAddr hwL2vpnIfIndex hwL2vpnPwMaster hwL2vpnRmtSiteID hwL2vpnInLabel hwL2vpnOutLabel hwL2vpnIfName hwL2vpnVsiName hwL2vpnOamType
The L2VPN OAM group.
 .1.3.6.1.4.1.2011.5.25.119.9.3.2.1
hwL2vpnOamNotificationGroup
hwL2vpnOamDloc hwL2vpnOamDlocClear hwL2vpnOamSd1Near hwL2vpnOamSd1NearClear hwL2vpnOamRdi hwL2vpnOamRdiClear hwL2vpnOamMeg hwL2vpnOamMegClear hwL2vpnOamMep hwL2vpnOamMepClear hwL2vpnOamPeriod hwL2vpnOamPeriodClear hwL2vpnOamAis hwL2vpnOamAisClear hwL2vpnOamSd2Near hwL2vpnOamSd2NearClear hwL2vpnOamLck hwL2vpnOamLckClear hwL2vpnOamCsf hwL2vpnOamCsfClear hwL2vpnOamExcess hwL2vpnOamExcessClear hwL2vpnOamMismatch hwL2vpnOamMismatchClear hwL2vpnOamMismerge hwL2vpnOamMismergeClear hwL2vpnOamFail hwL2vpnOamFailClear hwL2vpnOamDbdi hwL2vpnOamDbdiClear hwL2vpnOamUnknown hwL2vpnOamUnknownClear hwL2vpnOamLocalLock hwL2vpnOamLocalLockClear hwL2vpnOamSd1Far hwL2vpnOamSd1FarClear hwL2vpnOamSd2Far hwL2vpnOamSd2FarClear hwL2vpnOamFdi hwL2vpnOamFdiClear hwL2vpnOamTunnelNonSupport hwL2vpnOamTunnelNonSupportResumed hwL2vpnOamPmNonSupport hwL2vpnOamPmNonSupportResumed
The L2VPN OAM Notification group.
 .1.3.6.1.4.1.2011.5.25.119.9.3.2.2
Compliance Statements (1)

OID .1.3.6.1.4.1.2011.5.25.119.9.3.1.1
The compliance statement for systems supporting the HUAWEI-L2VPN-OAM-MIB.
Required groups
mandatory hwL2vpnOamGroup
mandatory hwL2vpnOamNotificationGroup
Notifications / Traps (44)
NameOIDDescription
hwL2vpnOamDloc
.1.3.6.1.4.1.2011.5.25.119.9.2.1
This object indicates that OAM reports an alarm for the loss of PW connectivity.
hwL2vpnOamMepClear
.1.3.6.1.4.1.2011.5.25.119.9.2.10
This object indicates that the OAM-reported alarm for the unexpected MEP is cleared.
hwL2vpnOamPeriod
.1.3.6.1.4.1.2011.5.25.119.9.2.11
This object indicates that OAM reports an alarm for the unexpected CV packet transmission interval.
hwL2vpnOamPeriodClear
.1.3.6.1.4.1.2011.5.25.119.9.2.12
This object indicates that the OAM-reported alarm for the unexpected CV packet interval is cleared.
hwL2vpnOamAis
.1.3.6.1.4.1.2011.5.25.119.9.2.13
This object indicates that OAM reports an alarm indication signal (AIS) alarm.
hwL2vpnOamAisClear
.1.3.6.1.4.1.2011.5.25.119.9.2.14
This object indicates that the OAM-reported AIS alarm is cleared.
hwL2vpnOamSd2Near
.1.3.6.1.4.1.2011.5.25.119.9.2.15
This object indicates that OAM reports an alarm when the near-end packet loss ratio exceeds the sd2 threshold.
hwL2vpnOamSd2NearClear
.1.3.6.1.4.1.2011.5.25.119.9.2.16
This object indicates that the OAM-reported alarm, which was generated when the near-end packet loss ratio exceeded the sd2 threshold, is cleared.
hwL2vpnOamLck
.1.3.6.1.4.1.2011.5.25.119.9.2.17
This object indicates that OAM reports a locking (LCK) alarm.
hwL2vpnOamLckClear
.1.3.6.1.4.1.2011.5.25.119.9.2.18
This object indicates that the OAM-reported alarm for the LCK failure is cleared.
hwL2vpnOamCsf
.1.3.6.1.4.1.2011.5.25.119.9.2.19
This object indicates that OAM reports an alarm when a client-layer signal fails.
hwL2vpnOamDlocClear
.1.3.6.1.4.1.2011.5.25.119.9.2.2
This object indicates that the OAM-reported alarm for the loss of PW connectivity is cleared.
hwL2vpnOamCsfClear
.1.3.6.1.4.1.2011.5.25.119.9.2.20
This object indicates that the OAM-reported alarm for the client-layer signal failure is cleared.
hwL2vpnOamExcess
.1.3.6.1.4.1.2011.5.25.119.9.2.21
This object indicates that OAM reports an alarm when the number of received TTSIs on a PW exceeds the upper threshold.
hwL2vpnOamExcessClear
.1.3.6.1.4.1.2011.5.25.119.9.2.22
This object indicates that the OAM-reported alarm, which was generated when the number of received TTSIs on a PW exceeded the upper threshold, is cleared.
hwL2vpnOamMismatch
.1.3.6.1.4.1.2011.5.25.119.9.2.23
OAM reported a TTSI mismatch alarm.
hwL2vpnOamMismatchClear
.1.3.6.1.4.1.2011.5.25.119.9.2.24
OAM reported the TTSI mismatch alarm disappearance.
hwL2vpnOamMismerge
.1.3.6.1.4.1.2011.5.25.119.9.2.25
OAM reported a TTSI mismerge alarm.
hwL2vpnOamMismergeClear
.1.3.6.1.4.1.2011.5.25.119.9.2.26
OAM reported the TTSI mismerge alarm disappearance.
hwL2vpnOamFail
.1.3.6.1.4.1.2011.5.25.119.9.2.27
This object indicates that OAM reports an alarm when no detection-triggering packet is received from the remote end after automatic protocol-based detection expires.
hwL2vpnOamFailClear
.1.3.6.1.4.1.2011.5.25.119.9.2.28
This object indicates that the OAM-reported alarm, which was generated when a detection-triggering packet was received from the remote end after automatic protocol-based detection expired, is cleared.
hwL2vpnOamDbdi
.1.3.6.1.4.1.2011.5.25.119.9.2.29
This object indicates that OAM reports a PW backward defect indication (BDI) alarm.
hwL2vpnOamSd1Near
.1.3.6.1.4.1.2011.5.25.119.9.2.3
This object indicates that OAM reports an alarm when the near-end packet loss ratio exceeds the sd1 threshold.
hwL2vpnOamDbdiClear
.1.3.6.1.4.1.2011.5.25.119.9.2.30
This object indicates that the OAM-reported PW BDI alarm is cleared.
hwL2vpnOamUnknown
.1.3.6.1.4.1.2011.5.25.119.9.2.31
OAM reported an unknown limitation alarm.
hwL2vpnOamUnknownClear
.1.3.6.1.4.1.2011.5.25.119.9.2.32
OAM reported the unknown limitation alarm disappearance.
hwL2vpnOamLocalLock
.1.3.6.1.4.1.2011.5.25.119.9.2.33
This object indicates that OAM reports an LCK alarm at the PW layer.
hwL2vpnOamLocalLockClear
.1.3.6.1.4.1.2011.5.25.119.9.2.34
This object indicates that the OAM-reported LCK alarm at the PW layer is cleared.
hwL2vpnOamSd1Far
.1.3.6.1.4.1.2011.5.25.119.9.2.35
This object indicates that OAM reports an alarm when the far-end packet loss ratio exceeds the sd1 threshold.
hwL2vpnOamSd1FarClear
.1.3.6.1.4.1.2011.5.25.119.9.2.36
This object indicates that the OAM-reported alarm, which was generated when the far-end packet loss ratio exceeded the sd1 threshold, is cleared.
hwL2vpnOamSd2Far
.1.3.6.1.4.1.2011.5.25.119.9.2.37
This object indicates that OAM reports an alarm when the far-end packet loss ratio exceeds the sd2 threshold.
hwL2vpnOamSd2FarClear
.1.3.6.1.4.1.2011.5.25.119.9.2.38
This object indicates that the OAM-reported alarm, which was generated when the far-end packet loss ratio exceeded the sd2 threshold, is cleared.
hwL2vpnOamFdi
.1.3.6.1.4.1.2011.5.25.119.9.2.39
This object indicates that OAM reports a forward defect indication (FDI) alarm.
hwL2vpnOamSd1NearClear
.1.3.6.1.4.1.2011.5.25.119.9.2.4
This object indicates that the OAM-reported alarm, which was generated when the near-end packet loss ratio exceeded the sd1 threshold, is cleared.
hwL2vpnOamFdiClear
.1.3.6.1.4.1.2011.5.25.119.9.2.40
This object indicates that the OAM-reported FDI alarm is cleared.
hwL2vpnOamTunnelNonSupport
.1.3.6.1.4.1.2011.5.25.119.9.2.41
This object indicates that an alarm is generated when MPLS OAM or MPLS-TP OAM for a PW detects a non-supported public network tunnel.
hwL2vpnOamTunnelNonSupportResumed
.1.3.6.1.4.1.2011.5.25.119.9.2.42
This object indicates that the alarm, which was generated when MPLS OAM or MPLS-TP OAM for a PW detected a non-supported public network tunnel, is cleared.
hwL2vpnOamPmNonSupport
.1.3.6.1.4.1.2011.5.25.119.9.2.43
This object indicates that an alarm is generated when MPLS OAM or MPLS-TP OAM for a PW performance measurement detects a non-supported public network tunnel.
hwL2vpnOamPmNonSupportResumed
.1.3.6.1.4.1.2011.5.25.119.9.2.44
This object indicates that the alarm, which was generated when MPLS OAM or MPLS-TP OAM for a PW performance measurement detected a non-supported public network tunnel, is cleared.
hwL2vpnOamRdi
.1.3.6.1.4.1.2011.5.25.119.9.2.5
This object indicates that OAM reports a remote defect indication (RDI) alarm.
hwL2vpnOamRdiClear
.1.3.6.1.4.1.2011.5.25.119.9.2.6
This object indicates that the OAM-reported RDI alarm is cleared.
hwL2vpnOamMeg
.1.3.6.1.4.1.2011.5.25.119.9.2.7
This object indicates that OAM reports an alarm for the unexpected MEG.
hwL2vpnOamMegClear
.1.3.6.1.4.1.2011.5.25.119.9.2.8
This object indicates that the OAM-reported alarm for the unexpected MEG is cleared.
hwL2vpnOamMep
.1.3.6.1.4.1.2011.5.25.119.9.2.9
This object indicates that OAM reports an alarm for the unexpected MEP.