HUAWEI-L2VLAN-MIB Table View

This table shows the VLAN status information. It describes information about a VLAN, such as the type, interface list, and current status of the VLAN.

hwL2VlanMIBEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1

Entries of vlan MIB table.

Indexes

hwL2VlanIndex

Column	Syntax	OID
hwL2VlanIndex The vlan-id or other identifier referring to this vlan.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.1
hwL2VlanDescr Description of the vlan.	OctetStringr/w Constraints: range: 0-80	.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.2
hwL2VlanPortList The set of Ports which belong to the vlan.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.3
hwL2VlanType The value of this object identifies the type of a VLAN. Change the value from '2' to '1' indicates that the common-vlan is configured into super-vlan; Change the value from '1' to '2' indicates that the super-vlan is c…	Enumerationr/w Enumerated Values: 1 superVlan 2 commonVlan 3 subVlan 4 muxVlan 5 muxSubVlan 6 protocolTransVlan	.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.4
hwL2VlanUnknownUnicastProcessing The value of this object identifies whether the unknown unicast packet is broadcasted.	Enumerationr/w Enumerated Values: 1 broadcast 2 discard	.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.5
hwL2VlanIfIndex Whether vlan interface is configured on vlan. If vlan interface is configured, the value of the node is InterfaceIndex, else the value is -1.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.6
hwL2VlanMacLearn The value of this object identifies whether the MAC address learning function is enabled. The value enabled(1) indicates MAC address learning is allowed; disable(2) indicates it's closed. Only Super VLAN and Sub VLAN su…	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.7
hwL2VlanMulticast The value enabled(1) indicates vlan Multicasting is allowed; disable(2) indicates it's closed. The default value is disable(2).	P-BRIDGE-MIBEnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.8
hwL2VlanAdminStatus The value of this object identifies whether a VLAN is shut down. Value disable(2) indicates shutdown the vlan; enabled(1) indicates open the vlan.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.9
hwL2VlanStatisStatus The value of this object identifies whether the VLAN statistics function is enabled. The value enabled(1) indicates Statistics onvlan are allowed; disable(2) indicates aren't. The default value is disable(2).	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.10
hwL2VlanCreateStatus The status indicates how the VLAN is created, which is statically configured by management or created dynamically by GVRP.	Enumeration Enumerated Values: 1 other 2 static 3 dynamic	.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.11
hwL2VlanRowStatus The value of this object identifies the row status recorded by the VLAN.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.12
hwL2VlanBcast Whether to broadcast the broadcast packets when ports receive it. enabled(1) indicates broadcast the packets, disable(2) indicates it'll discard the broadcast packet. Default value is enabled(1).	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.13
hwL2VlanUnknownMulticastProcessing Whether to broadcast the unknown multicast packets when ports receive it. broadcast(1) indicates broadcast the packet, discard(2) indicates it'll discard the unknown multicast packet. Default value is broadcast(1).	Enumerationr/w Enumerated Values: 1 broadcast 2 discard	.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.14
hwL2VlanProperty The value of this object identifies the type of a VLAN.	Enumeration Enumerated Values: 1 default 2 backboneVlan 3 mutilcastVlan 4 userVlan	.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.15
hwL2VlanAgingTime The aging time of MAC entry that associated with the vlan.'0' means will be never aged,'-1' means aging-time is not configured to the vlan.	Integer32r/w Constraints: range: -1-0 range: 60-1000000	.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.16
hwL2VlanName Name of the vlan.	OctetStringr/w Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.17
hwL2VlanSmartMacLearn The value indicates whether the MAC address learning is opened, when the number of the port which is up state and belonging to the vlan is below and equal to two. The value enabled(1) indicates learning is not allowed, …	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.18
hwL2VlanServiceName Service name of the vlan.	OctetStringr/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.19
hwL2VlanManagementVlan This object indicates whether the VLAN is a management VLAN: enable: 1 disable: 2	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.20
hwL2VlanDynamicVlan This object indicates whether the VLAN is a dynamic VLAN: enable: 1 disable: 2	P-BRIDGE-MIBEnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.21

This is the table to configure the double tags for the incoming packets of the VLAN stacking interface. It describes the function to encapsulate the incoming packets of a VLAN stacking interface with the double tags.

hwL2VlanStackingEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1

QinQ-port configuration table.

Indexes

hwL2VlanStackingPortIndex hwL2VlanStackingInsideVlanId

Column	Syntax	OID
hwL2VlanStackingPortIndex Index number of QinQ-port.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1.1
hwL2VlanStackingInsideVlanId Inside vlan-id of QinQ-port, use it as the Index.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1.2
hwL2VlanStackingOutsideVlanListLow This object indicates the low 2048 bits of the VLAN list, specifying the outer VLAN tag of incoming packets on the QinQ interface. Each bit corresponds to a VLAN ID.	OctetStringr/w Constraints: range: 256-256	.1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1.3
hwL2VlanStackingOutsideVlanListHigh This object indicates the high 2048 bits of the VLAN list, specifying the outer VLAN tag of incoming packets on the QinQ interface. Each bit corresponds to a VLAN ID.	OctetStringr/w Constraints: range: 256-256	.1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1.4
hwL2VlanStackingRowStatus The value of this object identifies the row status of the double VLAN tag configuration table of the VLAN stacking interface.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1.5

This is the table to configure the VLAN swapping on the VLAN mapping interface. It describes the mapping relationship in the VLAN substitution on the VLAN mapping interface.

hwL2VlanMappingEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1

QinQ-port configuration table.

Indexes

hwL2VlanMappingPortIndex hwL2VlanMappingInsideVlanId

Column	Syntax	OID
hwL2VlanMappingPortIndex This object indicates the index of an interface where VLAN mapping is configured.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1.1
hwL2VlanMappingInsideVlanId The value of this object identifies the VLAN ID. This object describes the VLAN ID after the replacement.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1.2
hwL2VlanMappingOutsideVlanListLow This object indicates the low 2048 bits of the VLAN list. This object specifies the VLAN list to be replaced. Each bit corresponds to a VLAN.	OctetStringr/w Constraints: range: 256-256	.1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1.3
hwL2VlanMappingOutsideVlanListHigh This object indicates the high 2048 bits of the VLAN list. This object specifies the VLAN list to be replaced. Each bit corresponds to a VLAN.	OctetStringr/w Constraints: range: 256-256	.1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1.4
hwL2VlanMappingRowStatus The value of this object identifies the row status of the modify replacement table of the VLAN mapping interface.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1.5

The table contains configuration and control information for the super vlan.

hwSuperVlanEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.3.1

Entries of the super vlan table.

Indexes

hwSuperVlanId

Column	Syntax	OID
hwSuperVlanId The super vlan-id.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.3.1.1
hwSubVlanListLow The lowest possible value of the sub vlan list on the supervlan.	OctetStringr/w Constraints: range: 256-256	.1.3.6.1.4.1.2011.5.25.42.3.1.2.3.1.2
hwSubVlanListHigh The highest possible value of the sub vlan list on the supervlan.	OctetStringr/w Constraints: range: 256-256	.1.3.6.1.4.1.2011.5.25.42.3.1.2.3.1.3

The table contains configuration and control information for interfaces isolate.

hwL2InterfIsolateEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.4.1

Secondary vlan lists of Isolate-vlans.

Indexes

hwL2InterfIsolateVlanId

Column	Syntax	OID
hwL2InterfIsolateVlanId vlan-id. The vlan into which interf-isolate is configured.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.4.1.1
hwL2InterfIsolateInterflistLow The lowest possible value of Interface list on the vlan.	OctetStringr/w Constraints: range: 65-65	.1.3.6.1.4.1.2011.5.25.42.3.1.2.4.1.2
hwL2InterfIsolateInterflistHigh The highest possible value of Interface list on the vlan.	OctetStringr/w Constraints: range: 65-65	.1.3.6.1.4.1.2011.5.25.42.3.1.2.4.1.3

The table contains mapping information between isolated ports.

hwL2IsolatemappingEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.5.1

Indexes

hwL2IsolatemappingPortNum

Column	Syntax	OID
hwL2IsolatemappingPortNum Port number.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2011.5.25.42.3.1.2.5.1.1
hwL2IsolateInterflistLow The lowest possible value of Interface list.	OctetStringr/w Constraints: range: 256-256	.1.3.6.1.4.1.2011.5.25.42.3.1.2.5.1.2
hwL2IsolateInterflistHigh The highest possible value of Interface.	OctetStringr/w Constraints: range: 256-256	.1.3.6.1.4.1.2011.5.25.42.3.1.2.5.1.3

The table contains global view configuration information for Flexible QinQ.

hwL2VlanQinQEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.7.1

Flexible QinQ configuration Entry.

Indexes

hwL2VlanQinQIndex hwL2VlanQinQDirection

Column	Syntax	OID
hwL2VlanQinQIndex Index number of Flexible QinQ.	Integer32 Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.42.3.1.2.7.1.1
hwL2VlanQinQDirection Inbound or outbound direction for VPN instance.	Enumeration Enumerated Values: 1 inbound 2 outbound	.1.3.6.1.4.1.2011.5.25.42.3.1.2.7.1.2
hwL2VlanQinQOutSideVlanId Outside vlan-id for ISP.	Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.7.1.3
hwL2VlanSysQinQRowStatus The table contains interface view configuration information for Flexible QinQ.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.7.1.4

Interface view Flexible QinQ configuration table.

hwL2VlanInterfaceQinQEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.8.1

Interface view Flexible QinQ configuration entry.

Indexes

hwL2VlanQinQInterfaceIndex hwL2VlanQinQIndex hwL2VlanQinQCVlanId hwL2VlanQinQDirection

Column	Syntax	OID
hwL2VlanQinQInterfaceIndex Interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.8.1.1
hwL2VlanQinQCVlanId Client vlan-id.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.8.1.2
hwL2VlanQinQSVlanId Internet service provide vlan-id	Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.8.1.3
hwL2VlanQinQAction Action push or nop.	Enumerationr/w Enumerated Values: 1 push 2 nop	.1.3.6.1.4.1.2011.5.25.42.3.1.2.8.1.4
hwL2VlanQinQNewCVlanId Replaced of new client vlan-id.	Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.8.1.5
hwL2VlanInterfaceQinQRowStatus This table can be created.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.8.1.6

The table contains double Vlan-Mapping.

hwL2DVlanMappingEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1

The table contains double Vlan-Mapping entry.

Indexes

hwL2DVlanMappingInterfaceIndex hwL2DVlanMappingExternalVlanId hwL2DVlanMappingInternalVlanId hwL2DVlanMappingDirection

Column	Syntax	OID
hwL2DVlanMappingInterfaceIndex Interface Index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.1
hwL2DVlanMappingExternalVlanId Service vlan-id.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.2
hwL2DVlanMappingInternalVlanId Client vlan-id.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.3
hwL2DVlanMappingDirection Direction inbound and outbound.	Enumeration Enumerated Values: 1 inbound 2 outbound	.1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.4
hwL2DVlanMappingMapExternalVlanId Replaced of new service vlan-id.	Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.5
hwL2DVlanMappingMapInternalVlanId Replaced of new client vlan-id.	Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.6
hwL2DVlanMappingAction Action drop, pop-externalvlan and swap.	Enumerationr/w Enumerated Values: 1 swap 2 popExternalVlan 3 drop	.1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.7
hwL2DVlanMappingRowStatus Operation status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.8

Configuration table.

hwL2VlanMappingExtEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1

The table contains Vlan-Mapping entry.

Indexes

hwL2VlanMappingExtPortIndex hwL2VlanMappingExtDirection hwL2VlanMappingExtVlanId

Column	Syntax	OID
hwL2VlanMappingExtPortIndex Port Index.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.1
hwL2VlanMappingExtDirection Direction inbound and outbound.	Enumeration Enumerated Values: 1 inbound 2 outbound	.1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.2
hwL2VlanMappingExtVlanId The outside vlan-id.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.3
hwL2VlanMappingExtVlanListLow The possible value of the inside vlan list.	OctetStringr/w Constraints: range: 256-256	.1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.4
hwL2VlanMappingExtVlanListHigh The possible value of the inside vlan list.	OctetStringr/w Constraints: range: 256-256	.1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.5
hwL2VlanMappingExtRowStatus This table can be created.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.6
hwL2VlanMappingExtPriorityMode The priority mode of outside VLAN after mapping, the priority can be appointed or inherit from inner VLAN's priority.	Enumerationr/w Enumerated Values: 1 priorityInherit 2 remark8021p	.1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.7
hwL2VlanMappingExtVlan8021p The priority of outside VLAN after mapping, its default value is 0.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.8

The table of advanced vlan stacking.

hwL2VlanStackingAdvEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1

The entry of advanced vlan stacking table.

Indexes

hwL2VlanStackingAdvPortIndex hwL2VlanStackingAdvOutside8021p hwL2VlanStackingAdvStackVlanId hwL2VlanStackingAdvStack8021p hwL2VlanStackingAdvMapVlanId

Column	Syntax	OID
hwL2VlanStackingAdvPortIndex The Index of L2-Switch Interface.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.1
hwL2VlanStackingAdvOutside8021p The 8021p value of vlan before stacked operation.	Integer32 Constraints: range: 0-8	.1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.2
hwL2VlanStackingAdvStackVlanId The outer vlan-id after stacked operation.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.3
hwL2VlanStackingAdvStack8021p The 8021p of outer vlan-id after stacked, it's an optional field, if it is not selected, its value is 8.	Integer32 Constraints: range: 0-8	.1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.4
hwL2VlanStackingAdvMapVlanId The possible value of the inner vlan after mapped operation.	Q-BRIDGE-MIBVlanIdOrNone Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.5
hwL2VlanStackingAdvOutsideVlanListLow The possible value of the CE-Vlan low list.	OctetStringr/w Constraints: range: 256-256	.1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.6
hwL2VlanStackingAdvOutsideVlanListHigh The possible value of the CE-Vlan high list.	OctetStringr/w Constraints: range: 256-256	.1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.7
hwL2VlanStackingAdvRowStatus This table can be created.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.8

The table of advanced vlan mapping.

hwL2VlanMappingAdvEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1

The entry of advanced vlan mapping table.

Indexes

hwL2VlanMappingAdvPortIndex hwL2VlanMappingAdvOutsideVlan8021p hwL2VlanMappingAdvMapVlanId hwL2VlanMappingAdvMapVlan8021p

Column	Syntax	OID
hwL2VlanMappingAdvPortIndex The index of L2-Switch port.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1.1
hwL2VlanMappingAdvOutsideVlan8021p The possible value of the CE-Vlan's 802.1p.	Integer32 Constraints: range: 0-8	.1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1.2
hwL2VlanMappingAdvMapVlanId The mapped vlan-id, using it as the index.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1.3
hwL2VlanMappingAdvMapVlan8021p The 8021p of outer vlan-id after mapped, it's an optional field, if it is not selected, its value is 8.	Integer32 Constraints: range: 0-8	.1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1.4
hwL2VlanMappingAdvOutsideVlanListLow The possible value of the CE-Vlan low list	OctetStringr/w Constraints: range: 256-256	.1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1.5
hwL2VlanMappingAdvOutsideVlanListHigh The possible value of the CE-Vlan high list.	OctetStringr/w Constraints: range: 256-256	.1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1.6
hwL2VlanMappingAdvRowStatus This table can be created.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1.7

The table to config the vlan switch.

hwL2VlanSwitchEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1

The entry of the vlan switch table.

Indexes

hwL2VlanSwitchIfIndex hwL2VlanSwitchOuterVlanId hwL2VlanSwitchInnerVlanId

Column	Syntax	OID
hwL2VlanSwitchIfIndex The interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.1
hwL2VlanSwitchOuterVlanId The ID of the outer vlan tag(customer's tag).	Q-BRIDGE-MIBVlanIdOrNone Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.2
hwL2VlanSwitchInnerVlanId The ID of the inner vlan tag.	Q-BRIDGE-MIBVlanIdOrNone Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.3
hwL2VlanSwitchMode The Mode of switch vlan operation, including the following case: 0 to 1, 0 to 2, 1 to 0, 1 to 1, 1 to 2, 2 to 0, 2 to 1, 2 to 2.	Enumerationr/w Enumerated Values: 1 zeroToOne 2 zeroToTwo 3 oneToZero 4 oneToOne 5 oneToTwo 6 twoToZero 7 twoToOne 8 twoToTwo	.1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.4
hwL2VlanSwitchOuterSwitchVlanId The outer vlan-id after switched.	Q-BRIDGE-MIBVlanIdOrNoner/w Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.5
hwL2VlanSwitchInnerSwitchVlanId The inner vlan-id after switched. 0 indicates it's not used.	Q-BRIDGE-MIBVlanIdOrNoner/w Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.6
hwL2VlanSwitch8021pRemark The 8021p of outer vlan-id after switched, it's an optional field, if it is not selected, its value is 8.	Integer32r/w Constraints: range: 0-8	.1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.7
hwL2VlanSwitchOutIfIndex The out interface index.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.8
hwL2VlanSwitchMtu The value of mtu.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.9
hwL2VlanSwitchMtuDiscardPkts The number of discard packets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.10
hwL2VlanSwitchMtuDiscardBytes The number of discard bytes.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.11
hwL2VlanSwitchMtuResetFlag The flag of reset the discard statistics.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.12
hwL2VlanSwitchMtuEnableFlag The flag of enable the discard statistics.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.13
hwL2VlanSwitchRowStatus Used for controlling the creation and deletion of this row. All writable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.14

The table of QinQ VLAN translation enable.

hwL2VlanQinqVlanTransEnaEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.14.1

The entry of QinQ VLAN translation enable.

Indexes

hwL2VlanQinqVlanTransEnaPortIndex

Column	Syntax	OID
hwL2VlanQinqVlanTransEnaPortIndex The index of L2-Switch port.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.5.25.42.3.1.2.14.1.1
hwL2VlanQinqVlanTransEna Enable QinQ VLAN translation.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.42.3.1.2.14.1.2
hwL2VlanQinqVlanTransEnaRowStatus This table can be created.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.14.1.3

The table of QinQ VLAN translation miss drop.

hwL2VlanQinqVlanTransMissDropEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.15.1

The entry of QinQ VLAN translation miss drop.

Indexes

hwL2VlanQinqVlanTransMissDropPortIndex

Column	Syntax	OID
hwL2VlanQinqVlanTransMissDropPortIndex The index of L2-Switch port.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.5.25.42.3.1.2.15.1.1
hwL2VlanQinqVlanTransMissDrop Packets are dropped when a VLAN translation miss occurs.	Enumerationr/w Enumerated Values: 1 noDrop 2 drop	.1.3.6.1.4.1.2011.5.25.42.3.1.2.15.1.2
hwL2VlanQinqVlanTransMissDropRowStatus This table can be created.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.15.1.3

The table of vlan-mapping at the VLAN view.

hwL2VlanViewMappingEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1

The table contains vlan-mapping at the VLAN view entry.

Indexes

hwL2VlanViewMappingVlanId hwL2VlanViewMappingDirection

Column	Syntax	OID
hwL2VlanViewMappingVlanId The VLAN ID before mapping, using it as the index.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1.1
hwL2VlanViewMappingDirection Direction inbound and outbound.	Enumeration Enumerated Values: 1 inbound 2 outbound 3 both	.1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1.2
hwL2VlanViewMappingMapVlanId The VLAN ID after mapping.	Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1.3
hwL2VlanViewMappingPriorityMode The priority mode: the priority can be remarked or inherit: 1: priority inherit 2: remark 8021p	Enumerationr/w Enumerated Values: 1 priorityInherit 2 remark8021p	.1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1.4
hwL2VlanViewMappingVlan8021p The priority after mapping, its default value is 0.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1.5
hwL2VlanViewMappingRowStatus Operation status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1.6

The table of VLAN-stacking with Mask.

hwL2VlanStackingMaskEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1

The entry of the table of VLAN-stacking with Mask.

Indexes

hwL2VlanStackingMaskPortIndex hwL2VlanStackingMaskStackVlanId hwL2VlanStackingMaskStack8021p hwL2VlanStackingMaskAction hwL2VlanStackingMaskDirection

Column	Syntax	OID
hwL2VlanStackingMaskPortIndex The index of L2-Switch interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.1
hwL2VlanStackingMaskStackVlanId The outer VLAN-ID after stacking operation.	Q-BRIDGE-MIBVlanIdOrNone Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.2
hwL2VlanStackingMaskStack8021p The 8021p of outer VLAN-ID after stacking, it's an optional field, if it is not selected, its value is 8, means inherit the 8021p from inner tag.	Integer32 Constraints: range: 0-8	.1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.3
hwL2VlanStackingMaskAction The packet will be poped or pushed.	Enumeration Enumerated Values: 1 pop 2 push	.1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.4
hwL2VlanStackingMaskDirection The direction which the packet need be poped or pushed, that is ,the packet is receviced or transitted	Enumeration Enumerated Values: 1 inside 2 outside 3 both	.1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.5
hwL2VlanStackingMaskVlanListLow The possible value of the CE-VLAN low list.	OctetStringr/w Constraints: range: 256-256	.1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.6
hwL2VlanStackingMaskVlanListHigh The possible value of the CE-VLAN high list.	OctetStringr/w Constraints: range: 256-256	.1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.7
hwL2VlanStackingMaskRowStatus Operation status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.8

The table of VLAN assignment based on ip subnet.

hwL2VlanIpSubnetVlanEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1

The entry of the table of VLAN assignment based on ip subnet.

Indexes

hwL2VlanIpSubnetVlanVlanId hwL2VlanIpSubnetVlanIpSubnetIndex

Column	Syntax	OID
hwL2VlanIpSubnetVlanVlanId The VLAN-ID after VLAN assignment based on ip subnet.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.1
hwL2VlanIpSubnetVlanIpSubnetIndex The index of ip subnet on this vlan, ranging from integer 1 to 12.	Integer32 Constraints: range: 1-12	.1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.2
hwL2VlanIpSubnetVlanIpAddress The IpAddress based on vlan.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.3
hwL2VlanIpSubnetVlanIpSubnetMask The IpAddress or Ip subnet mask.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.4
hwL2VlanIpSubnetVlanPriority The priority after vlan assignment based on ip subnet, its default value is 0.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.5
hwL2VlanIpSubnetVlanRowStatus Operation status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.6

The table of VLAN assignment based on MAC.

hwL2VlanMacVlanEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.19.1

The entry of the table of VLAN assignment based on MAC.

Indexes

hwL2VlanMacVlanVlanId

Column	Syntax	OID
hwL2VlanMacVlanVlanId mac-vlan.	Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.19.1.1
hwL2VlanMacVlanMac The VLAN-ID after VLAN assignment based on mac.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.42.3.1.2.19.1.2
hwL2VlanMacVlanVlanPriority The priority after vlan assignment based on mac, its default value is 0.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.5.25.42.3.1.2.19.1.3
hwL2VlanMacVlanMacRowStatus Operation status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.19.1.4

The table of VLAN assignment based on protocol.

hwL2VlanProtocolVlanEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.20.1

The entry of the table of VLAN assignment based on protocol.

Indexes

hwL2VlanProtocolVlanVlanId hwL2VlanProtocolVlanProtocolIndex

Column	Syntax	OID
hwL2VlanProtocolVlanVlanId The VLAN-ID after VLAN assignment based on protocol.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.20.1.1
hwL2VlanProtocolVlanProtocolIndex The index of protocol on vlan, ranging from integer 1 to 16	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.2011.5.25.42.3.1.2.20.1.2
hwL2VlanProtocolVlanProtocolType Protocol type.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.3.1.2.20.1.3
hwL2VlanProtocolVlanEncapType Encap type, include ETHERII,SNAP,LLC.	Enumerationr/w Enumerated Values: 1 etherii 2 snap 3 llc	.1.3.6.1.4.1.2011.5.25.42.3.1.2.20.1.4
hwL2VlanProtocolVlanRowStatus Operation status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.20.1.5

The table of VLAN assignment based on strategy.

hwL2VlanPolicyVlanEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.21.1

The entry of the table of VLAN assignment based on strategy.

Indexes

hwL2VlanPolicyVlanVlanId

Column	Syntax	OID
hwL2VlanPolicyVlanMac Support MAC+IP and MAC+IP+PORT.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.42.3.1.2.21.1.1
hwL2VlanPolicyVlanIp Support MAC+IP and MAC+IP+PORT.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.42.3.1.2.21.1.2
hwL2VlanPolicyVlanPort Support MAC+IP+PORT.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.5.25.42.3.1.2.21.1.3
hwL2VlanPolicyVlanVlanId The VLAN-ID after VLAN assignment based on policy.	Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.21.1.4
hwL2VlanPolicyVlanVlanPriority The VLAN-ID after VLAN assignment based on policy.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.3.1.2.21.1.5
hwL2VlanPolicyVlanRowStatus Operation status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.21.1.6

A list of voice vlan mode entries.

hwL2VlanVoiceVlanPortEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1

An entry containing voice vlan mode information,
which is applicable to a voice vlan enabled interface.

Indexes

hwL2VlanVoiceVlanPortIndex

Column	Syntax	OID
hwL2VlanVoiceVlanPortIndex The port index on which voice vlan is enabled.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.1
hwL2VlanVoiceVlanPortEnable Voice VLAN enable status at port .	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.2
hwL2VlanVoiceVlanPortMode Voice VLAN configuration mode status, 1 for auto, 2 for manual.	Enumerationr/w Enumerated Values: 1 auto 2 manual	.1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.3
hwL2VlanVoiceVlanPortLegacy This flag is enabled. It indicates that the interworking with other vendors' equipment is enabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.4
hwL2VlanVoiceVlanPortSecurityMode Voice VLAN configuration security mode status, 1 for security, 2 for normal.	Enumerationr/w Enumerated Values: 1 security 2 normal	.1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.5
hwL2VlanVoiceVlanPortModifyPriorityMode The value of this object identifies the priority of voice packets to be forwarded , 1 for modifyPriByVlan, 2 for modifyPriByOui.	Enumerationr/w Enumerated Values: 1 modifyPriByVlan 2 modifyPriByOui	.1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.6

A table containing the MAC address which can be identified by voice vlan.

hwL2VlanVoiceVlanOuiEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1

An entry containing the information of MAC address which can be identified by voice vlan.

Indexes

hwL2VlanVoiceVlanOuiAddress hwL2VlanVoiceVlanOuiMask

Column	Syntax	OID
hwL2VlanVoiceVlanOuiAddress MAC address can be identified by Voice VLAN.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1.1
hwL2VlanVoiceVlanOuiMask The mask of MAC address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1.2
hwL2VlanVoiceVlanOuiDescription The description of OUI.	OctetStringr/w Constraints: range: 0-80	.1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1.3
hwL2VlanVoiceVlanOuiRowStatus Operation status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1.4

Configuration table.

hwL2VlanMappingMultiEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1

The table contains Vlan-Mapping entry.

Indexes

hwL2VlanMappingMultiPortIndex hwL2VlanMappingMultiDirection hwL2VlanMappingMultiVlanId hwL2VlanMappingMultiVlan8021p

Column	Syntax	OID
hwL2VlanMappingMultiPortIndex Port Index.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.1
hwL2VlanMappingMultiDirection Direction inbound and outbound.	Enumeration Enumerated Values: 1 inbound 2 outbound 3 both	.1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.2
hwL2VlanMappingMultiVlanId The outside vlan-id.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.3
hwL2VlanMappingMultiVlan8021p The priority of outside VLAN after mapping,8 means priority-inherit.	Integer32 Constraints: range: 0-8	.1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.4
hwL2VlanMappingMultiVlanListLow The possible value of the inside vlan list.	OctetStringr/w Constraints: range: 256-256	.1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.5
hwL2VlanMappingMultiVlanListHigh The possible value of the inside vlan list.	OctetStringr/w Constraints: range: 256-256	.1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.6
hwL2VlanMappingMultiRowStatus This table can be created.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.7

The table of VLAN assignment based on MAC.

hwL2VlanMacVlanNewEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1

The entry of the table of VLAN assignment based on MAC.

Indexes

hwL2VlanMacVlanNewMac

Column	Syntax	OID
hwL2VlanMacVlanNewMac The VLAN-ID after VLAN assignment based on MAC.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1.1
hwL2VlanMacVlanNewVlanId MAC-VLAN VLAN ID.	Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1.2
hwL2VlanMacVlanNewVlanPriority The priority after VLAN assignment based on MAC, its default value is 0.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1.3
hwL2VlanMacVlanNewMacRowStatus Operation status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1.4

The table of VLAN assignment based on protocol.

hwL2VlanProtocolVlanNewEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1

The entry of the table of VLAN assignment based on protocol.

Indexes

hwL2VlanProtocolVlanNewVlanId hwL2VlanProtocolVlanNewProtocolIndex

Column	Syntax	OID
hwL2VlanProtocolVlanNewVlanId The VLAN-ID after VLAN assignment based on protocol.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.1
hwL2VlanProtocolVlanNewProtocolIndex The index of protocol on vlan, ranging from integer 1 to 16	Integer32 Constraints: range: 0-15	.1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.2
hwL2VlanProtocolVlanNewProtocolType Protocol type.	Enumerationr/w Enumerated Values: 1 at 2 ipv4 3 ipv6 4 ipxEthernetii 5 ipxLlc 6 ipxRaw 7 ipxSnap 8 modeEthernetii 9 modeLlc 10 modeSnap	.1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.3
hwL2VlanProtocolVlanNewProtocolTypeValue The value of the configured protocol type. The relationship among hwL2VlanProtocolVlanNewProtocolType and hwL2VlanProtocolVlanNewProtocolTypeValue is as follows. |==========================…	OctetStringr/w Constraints: range: 2-2	.1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.4
hwL2VlanProtocolVlanNewRowStatus Operation status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.5

The table of VLAN assignment based on strategy.

hwL2VlanPolicyVlanNewEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1

The entry of the table of VLAN assignment based on strategy.

Indexes

hwL2VlanPolicyVlanNewVlanId hwL2VlanPolicyVlanNewMac hwL2VlanPolicyVlanNewIp hwL2VlanPolicyVlanNewPort

Column	Syntax	OID
hwL2VlanPolicyVlanNewMac Support MAC+IP and MAC+IP+PORT.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.1
hwL2VlanPolicyVlanNewIp Support MAC+IP and MAC+IP+PORT.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.2
hwL2VlanPolicyVlanNewPort Support MAC+IP+PORT.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.3
hwL2VlanPolicyVlanNewVlanId The VLAN-ID after VLAN assignment based on policy.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.4
hwL2VlanPolicyVlanNewVlanPriority The Priority after VLAN assignment based on policy.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.5
hwL2VlanPolicyVlanNewRowStatus Operation status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.6

Protocol-based VLAN port information table.
          
hwL2VlanProtocolVlanPortNewVlanId refers to hwL2VlanProtocolVlanNewVlanId
in hwL2VlanProtocolVlanNewTable.
          
hwL2VlanProtocolVlanPortNewProtocolId refers to hwL2VlanProtocolVlanNewProtocolIndex
in hwL2VlanProtocolVlanNewTable. So if the value of hwL2VlanProtocolVlanPortNewVlanId
and hwL2VlanProtocolVlanPortNewProtocolId have no corresponding entry in
hwL2VlanProtocolVlanNewTable, set operation for this table will fail.

hwL2VlanProtocolVlanPortNewEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1

Protocol-based VLAN port information entry.

Indexes

hwL2VlanProtocolVlanPortNewIndex hwL2VlanProtocolVlanPortNewVlanId hwL2VlanProtocolVlanPortNewProtocolIndex

Column	Syntax	OID
hwL2VlanProtocolVlanPortNewIndex The maximum number is the total number of the ports supported by device.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.1
hwL2VlanProtocolVlanPortNewVlanId The protocol-based VLAN ID.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.2
hwL2VlanProtocolVlanPortNewProtocolIndex The protocol index.	Integer32 Constraints: range: 0-15	.1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.3
hwL2VlanProtocolVlanPortNewPriority The protocol-based VLAN priority.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.4
hwL2VlanProtocolVlanPortNewRowStatus The row status of this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.5

Voice VLAN is enabled on the port.

hwL2VlanMultiVoiceVlanPortEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1

An entry containing voice VLAN mode information,
which is applicable to a voice VLAN enabled interface.

Indexes

hwL2VlanMultiVoiceVlanIfIndex

Column	Syntax	OID
hwL2VlanMultiVoiceVlanIfIndex The interface index on which voice VLAN is enabled.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.1
hwL2VlanMultiVoiceVlanPortVLanId The VLAN ID of voice VLAN on port .	Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.2
hwL2VlanMultiVoiceVlanPortUntagEnable The value of this object identifies whether untagged voice packets can be forwarded in voice VLAN, 1 for enabled, 2 for disabled.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.3
hwL2VlanMultiVoiceVlanPortTag0Enable The value of this object identifies whether tag0 voice packets can be forwarded in voice VLAN, 1 for enabled, 2 for disabled.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.4
hwL2VlanMultiVoiceVlanPortRowStatus The row status of this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.51

The table to config the vlan switch.

hwL2VlanSwitchExtEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1

The entry of the vlan switch table.

Indexes

hwL2VlanSwitchExtName

Column	Syntax	OID
hwL2VlanSwitchExtName The vlan switch name.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.1
hwL2VlanSwitchExtSrcIfIndex The index of source interface.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.2
hwL2VlanSwitchExtOuterVlanId The outer vlan.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.3
hwL2VlanSwitchExtVlanListLow The possible value of the inside vlan list.	OctetStringr/w Constraints: range: 256-256	.1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.4
hwL2VlanSwitchExtVlanListHigh The possible value of the inside vlan list.	OctetStringr/w Constraints: range: 256-256	.1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.5
hwL2VlanSwitchExtDstIfIndex The index of destination interface.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.6
hwL2VlanSwitchExtVlanXlateAction The action type of vlan: 1 : unchange vlan, 2 : switch vlan, 3 : push vlan.	Enumerationr/w Enumerated Values: 1 unchange 2 switch 3 push	.1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.7
hwL2VlanSwitchExtDstVlan The outer vlan of destination.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.8
hwL2VlanSwitchExtDstInnerVlan The inner vlan of destination.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.9
hwL2VlanSwitchExtRemark The remark 8021p value.	Integer32r/w Constraints: range: 0-8	.1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.10
hwL2VlanSwitchExtRemarkReverse The reverse remark 8021p value.	Integer32r/w Constraints: range: 0-8	.1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.11
hwL2VlanSwitchExtLinkStatus The link status of vlan switch.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.12
hwL2VlanSwitchExtRowStatus The row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.51

VLAN mapping configuration table.

hwL2VlanXlateEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1

The entry in the VLAN mapping configuration table.

Indexes

hwL2VlanXlateInterfaceIndex hwL2VlanXlateVlanIdBegin hwL2VlanXlateOuterVlanId hwL2VlanXlateVlan8021p hwL2VlanXlateDirection

Column	Syntax	OID
hwL2VlanXlateInterfaceIndex The index of the interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.1
hwL2VlanXlateVlanIdBegin The ID of the first VLAN (VLAN ID in the inner VLAN tag if there are double VLAN tags) at the user side.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.2
hwL2VlanXlateVlanIdEnd The ID of the end VLAN (VLAN ID in the inner VLAN tag if there are double VLAN tags) at the user side.	Q-BRIDGE-MIBVlanIdOrNoner/w Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.3
hwL2VlanXlateOuterVlanId The value of outer VLAN for packets with double tags in customer side. For one-tag-packet, it's 0.	Q-BRIDGE-MIBVlanIdOrNone Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.4
hwL2VlanXlateVlan8021p This object indicates the 802.1p priority in the VLAN tag to be mapped to.	Integer32 Constraints: range: 0-8 range: 65535-65535	.1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.5
hwL2VlanXlateDirection Direction inbound or outbound or both.	Enumeration Enumerated Values: 1 inbound 2 outbound 3 both	.1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.6
hwL2VlanXlateAction The packet will be mapped or stacked or popped.	Enumerationr/w Enumerated Values: 1 map 2 stack 3 pop	.1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.7
hwL2VlanXlateToVlanId The ID of the outer VLAN at the network side. If this VLAN is not in use, the ID is 0.	Q-BRIDGE-MIBVlanIdOrNoner/w Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.8
hwL2VlanXlateToinnerVlanId The value of inner VLAN in network side. It's 0 when it is not used.	Q-BRIDGE-MIBVlanIdOrNoner/w Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.9
hwL2VlanXlateremark The priority of outer VLAN in network side.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.10
hwL2VlanXlateRowStatus Operation status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.51

The table of QinQ-VLAN configuration.

hwL2QinQVlanEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1

The entry of QinQ-VLAN table.

Indexes

hwL2QinQVlanIfIndex hwL2QinQVlanIdBegin hwL2QinQVlanIdEnd hwL2QinQVlanInnerVlanIdBegin hwL2QinQVlanInnerVlanIdEnd hwL2QinQVlan8021pBegin hwL2QinQVlan8021pEnd hwL2QinQVlanEtherType

Column	Syntax	OID
hwL2QinQVlanIfIndex The index number of QinQ-VLAN port.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.1
hwL2QinQVlanIdBegin The begin VLAN ID of outside.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.2
hwL2QinQVlanIdEnd The end VLAN ID of outside.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.3
hwL2QinQVlanInnerVlanIdBegin The begin VLAN ID of inside.	Q-BRIDGE-MIBVlanIdOrNone Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.4
hwL2QinQVlanInnerVlanIdEnd The end VLAN ID of inside.	Q-BRIDGE-MIBVlanIdOrNone Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.5
hwL2QinQVlan8021pBegin The begin number of 8021p.	Integer32 Constraints: range: 0-8	.1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.6
hwL2QinQVlan8021pEnd The end number of 8021p.	Integer32 Constraints: range: 0-8	.1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.7
hwL2QinQVlanEtherType The value of Ethernet Type.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.8
hwL2QinQVlanMode The mode of QinQ-VLAN configuration.	Enumerationr/w Enumerated Values: 1 stacking 2 mapping 3 cosstacking 4 cosmapping 5 mapping2to1 6 mapping2to2	.1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.9
hwL2QinQVlanChangedVlanId The changed VLAN ID of outside.	Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.10
hwL2QinQVlanChangedInnerVlanId The changed VLAN ID of inside.	Q-BRIDGE-MIBVlanIdOrNoner/w Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.11
hwL2QinQVlanRemark The remark number of outside 8021p.If the value is 8, the priority in the outer tag is not changed.	Integer32r/w Constraints: range: 0-8	.1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.12
hwL2QinQVlanMapStackVlanId The map VLAN ID for inside after stacking action.	Q-BRIDGE-MIBVlanIdOrNoner/w Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.13
hwL2QinQVlanRowStatus This table can read, create and delete.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.14
hwL2QinQVlanInnerRemark The remark number of the changed VLAN for inside. If the value is 8, the priority in tag is not changed.	Integer32r/w Constraints: range: 0-8	.1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.15

The table of untagged VLAN add double tagged VLAN configuration.

hwL2UntagAddDTagEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1

The entry of untagged VLAN add double tagged VLAN table.

Indexes

hwL2UntagAddDTagPortIndex

Column	Syntax	OID
hwL2UntagAddDTagPortIndex The port index number of interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1.1
hwL2UntagAddDTagOuterVlanId The outer VLAN ID.	Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1.2
hwL2UntagAddDTagInnerVlanId The inner VLAN ID.	Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1.3
hwL2UntagAddDTagRowStatus This table can read, create and delete.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1.4

Configuration table.

hwL2QinQIsolateEntry row .1.3.6.1.4.1.2011.5.25.42.3.1.2.40.1

QinQ-VLAN isolate port configuration table.

Indexes

hwL2QinQIsolatePortIndex hwL2QinQIsolateVlanId hwL2QinQIsolatePeVlanId

Column	Syntax	OID
hwL2QinQIsolatePortIndex Index number of QinQ-port isolate port, use it as the Index.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.5.25.42.3.1.2.40.1.1
hwL2QinQIsolateVlanId The global vlan identifier that is associated with the QinQ-port, use it as the Index.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.40.1.2
hwL2QinQIsolatePeVlanId Outside vlan-id of QinQ-port ,use it as the Index.	Q-BRIDGE-MIBVlanIdOrNone Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.42.3.1.2.40.1.3
hwL2QinQIsolateCeVlanListLow The possible value of the CE vlan-id list.	OctetStringr/w Constraints: range: 256-256	.1.3.6.1.4.1.2011.5.25.42.3.1.2.40.1.4
hwL2QinQIsolateCeVlanListHigh The possible value of the CE vlan-id list.	OctetStringr/w Constraints: range: 256-256	.1.3.6.1.4.1.2011.5.25.42.3.1.2.40.1.5
hwL2QinQTagType The mode of QinQ-VLAN configuration.	Enumeration Enumerated Values: 1 dot1q 2 qinq	.1.3.6.1.4.1.2011.5.25.42.3.1.2.40.1.6