HUAWEI-L2MAM-MIB Table View

This table is used to configure a VLAN-based, VSI-based, or global blackhole-based MAC address table or static MAC address table.

hwdbCfgFdbEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.2.1

Entries of The layer 2 mac-address forwarding table.

Indexes

hwCfgFdbMac hwCfgFdbVlanId hwCfgFdbVsiName

Column	Syntax	OID
hwCfgFdbMac This object indicates unicast MAC entries in the static MAC address table.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.42.2.1.2.1.1
hwCfgFdbVlanId This object indicates the VLAN ID related to the static MAC address table. The value ranges from 0 to 4094.	Unsigned32 Constraints: range: 0-4094	.1.3.6.1.4.1.2011.5.25.42.2.1.2.1.2
hwCfgFdbVsiName This object indicates the VSI name related to the static MAC address table.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.25.42.2.1.2.1.3
hwCfgFdbPort This object indicates the port index of the forwarding port. The port must be of the Ethernet type. The port must belong to a VLAN or permits packets with a specific VLAN ID to pass. The value is 0 for blackhole entries.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.42.2.1.2.1.4
hwCfgFdbType This object indicates the MAC entry type. This object cannot be created if the MAC entry is dynamic.	Enumerationr/w Enumerated Values: 2 static 3 blackhole	.1.3.6.1.4.1.2011.5.25.42.2.1.2.1.5
hwCfgFdbRowstatus This object indicates the operating status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.2.1.2.1.6
hwCfgFdbAtmPort The forwarding port. The port must be an atm port.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.42.2.1.2.1.7
hwCfgFdbVpi The Virtual Path Identifier.	Integer32r/w Constraints: range: 0-255 range: 65535-65535	.1.3.6.1.4.1.2011.5.25.42.2.1.2.1.8
hwCfgFdbVci The Virtual Connection Identifier.	Integer32r/w Constraints: range: 0-2047 range: 65535-65535	.1.3.6.1.4.1.2011.5.25.42.2.1.2.1.9
hwCfgFdbCeDefault The flag indicates whether the MAC address entry is configed according to ce-default-vlan. 'no-ce-default(0)' indicates no, 'ce-default(1)' indicates yes	Enumerationr/w Enumerated Values: 0 noCeDefault 1 ceDefault	.1.3.6.1.4.1.2011.5.25.42.2.1.2.1.10

This table is used to manage a device's dynamic MAC address table. Data in this table is generated after the device automatically learns MAC addresses and ages. Data in this table can be deleted instead of being added by users.

hwdbDynFdbEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.3.1

Entries of The layer 2 mac-address forwarding table.

Indexes

hwDynFdbMac hwDynFdbVlanId hwDynFdbVsiName

Column	Syntax	OID
hwDynFdbMac This object indicates unicast MAC addresses in the dynamic MAC address table.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.42.2.1.3.1.1
hwDynFdbVlanId This object indicates the VLAN ID related to the dynamic MAC address table.	Unsigned32 Constraints: range: 0-4094	.1.3.6.1.4.1.2011.5.25.42.2.1.3.1.2
hwDynFdbVsiName This object indicates the VSI name related to the dynamic MAC address table.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.25.42.2.1.3.1.3
hwDynFdbPort This object indicates the port index of the forwarding port. The port must be of the Ethernet type.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.42.2.1.3.1.4
hwDynFdbAtmPort The forwarding port. The port must be an atm port.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.42.2.1.3.1.5
hwDynFdbVpi The Virtual Path Identifier.	Integer32r/w Constraints: range: 0-255 range: 65535-65535	.1.3.6.1.4.1.2011.5.25.42.2.1.3.1.6
hwDynFdbVci The Virtual Connection Identifier.	Integer32r/w Constraints: range: 0-2047 range: 65535-65535	.1.3.6.1.4.1.2011.5.25.42.2.1.3.1.7
hwDynFdbRowstatus This object indicates the operating status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.2.1.3.1.8
hwDynSecurityFdbToStaticEnable This object indicates whether dynamic MAC entries are converted into static MAC entries.	NQA-MIBEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.25.42.2.1.3.1.9

A table containing the mac-address learning-limit rule information for device.
It can limit on ethernet interface,vlan,ethernet interface + vlan.

hwMacLimitEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.4.1

Entries of the mac-address learning-limit table.

Indexes

hwMacLimitPort hwMacLimitVlanId hwMacLimitVsiName

Column	Syntax	OID
hwMacLimitPort The port number which will be configured mac-limit.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.42.2.1.4.1.1
hwMacLimitVlanId The vlan id which will be configured mac-limit.	Integer32 Constraints: range: 0-4094	.1.3.6.1.4.1.2011.5.25.42.2.1.4.1.2
hwMacLimitVsiName The vsi name which will be configured mac-limit.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.25.42.2.1.4.1.3
hwMacLimitMaxMac The maximum mac address. When the value is '0', the meaning is that there isn't limiting rule to the mac-address number.	Integer32r/w Constraints: range: 0-131072	.1.3.6.1.4.1.2011.5.25.42.2.1.4.1.4
hwMacLimitMaxRate The max mac-address learning rate. When the valu e is '0', the meaning is that there isn't limiting rule to the learning rate.	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.2011.5.25.42.2.1.4.1.5
hwMacLimitAction The mac-address limit action of this entry. The meanings of the values are: discard(1)- Discard packets forward(2)- Forward packets.	Enumerationr/w Enumerated Values: 1 discard 2 forward	.1.3.6.1.4.1.2011.5.25.42.2.1.4.1.6
hwMacLimitAlarm The mac-limit alarm switch of this entry. The meanings of the values are: disable(1), enable(2)	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.5.25.42.2.1.4.1.7
hwMacLimitRowstatus The operating state of the row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.2.1.4.1.8
hwMacAddressLearn The flag of enable Mac address learn.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.5.25.42.2.1.4.1.9
hwMacDynAddressLearnNum The number of learned dynamic MAC address .	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.2.1.4.1.10
hwMacSecureAddressLearnNum The number of learned secure MAC address .	Integer32 Constraints: range: 0-131072	.1.3.6.1.4.1.2011.5.25.42.2.1.4.1.11
hwMacLimitBdId The bridge domain id which will be configured mac-limit.	Integer32 Constraints: range: 1-32768	.1.3.6.1.4.1.2011.5.25.42.2.1.4.1.12
hwMacLimitEVPName This object indicates that the number of MAC addresses learned by the interface fell below the upper limit.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.25.42.2.1.4.1.13

This table is used to query Layer 2 information on a board.

hwMacUsageEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.5.1

MAC usage entry

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
hwMacEntityUsage This object indicates the utilization ratio of the MAC address table on each interface board.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.2011.5.25.42.2.1.5.1.1
hwMacEntityUsageThreshold This object indicates that the MAC address usage fell below the alarm threshold.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.5.25.42.2.1.5.1.2

The layer 2 configured mac-address forwarding table .The table that 
contains the layer 2 mac-address forwarding information 
currently operating on this device.

hwdbCfg3tupleFdbEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.6.1

Entries of The layer 2 mac-address forwarding table.

Indexes

hwdbCfg3tupleFdbMac hwdbCfg3tupleFdbVlanId hwdbCfg3tupleFdbInPort

Column	Syntax	OID
hwdbCfg3tupleFdbMac A unicast MAC address for which the device contains it's information in the mac-address table. The mac-address can't be a special address or multicast address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.42.2.1.6.1.1
hwdbCfg3tupleFdbVlanId The VLAN name or other identifier referring to the VLAN which is correlative to the hwFdbMac.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.2011.5.25.42.2.1.6.1.2
hwdbCfg3tupleFdbInPort The input port. The port must be an ethernet port. And the port must be contained by the hwFdbVlanId or allow the hwFdbVlanId get across through itself.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.42.2.1.6.1.3
hwdbCfg3tupleFdbOutPort The forwarding port. The port must be an ethernet port. And the port must be contained by the hwFdbVlanId or allow the hwFdbVlanId get across through itself.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.42.2.1.6.1.4
hwdbCfg3tupleFdbRowStatus The operating state of the row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.2.1.6.1.5

A table containing the port security information for device.
It can protect the port from inaccessible mac.

hwPortSecurityEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.11.1

Entries of the port security table.

Indexes

hwPortSecurityPort

Column	Syntax	OID
hwPortSecurityPort The port number which will be configured port security.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.42.2.1.11.1.1
hwPortSecurityEnabled When this object is set to 'enabled(1)' Port security is enabled on this port else disabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.42.2.1.11.1.2
hwPortSecurityProtectAction The port security protect action of this entry. The meanings of the values are: restrict(1)- shutdown the port protect(2)- discard the unknow source mac packets and not learn shutdown(3)- send trap noaction(4)- broa…	Enumerationr/w Enumerated Values: 1 restrict 2 protect 3 shutdown 4 noaction	.1.3.6.1.4.1.2011.5.25.42.2.1.11.1.3
hwPortSecurityAllDynToStaticEnable When this object is set to 'enable(1)' all dynamic mac-address on the Port will convert to static.	NQA-MIBEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.25.42.2.1.11.1.4
hwPortSecurityAllDynToStickyEnable When this object is set to enable and port security is enabled, the dynamic MAC address entry will be changed to a sticky MAC address entry.	NQA-MIBEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.5.25.42.2.1.11.1.5
hwPortSecurityMaxMacNum The maximum mac address can be learned based on the port.	Integer32r/w Constraints: range: 0-16384	.1.3.6.1.4.1.2011.5.25.42.2.1.11.1.6

This table is used to query restriction rules on global MAC address learning.

hwMacLimitGlobalRuleEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.12.1

Entries of the global mac-address learning-limit rule table.

Indexes

hwMacLimitGlobalRuleName

Column	Syntax	OID
hwMacLimitGlobalRuleName This object indicates the name of the restriction rule on global MAC address learning.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.25.42.2.1.12.1.1
hwMacLimitRuleMaxMac This object indicates the maximum number of MAC addresses that can be learned. The value of 0 indicates no restriction rules.	Integer32r/w Constraints: range: 0-131072	.1.3.6.1.4.1.2011.5.25.42.2.1.12.1.11
hwMacLimitRuleMaxRate This object indicates the highest rate of MAC address learning. The value ranges from 0 to 1000. The value of 0 indicates that the rate of MAC address learning is not limited.	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.2011.5.25.42.2.1.12.1.12
hwMacLimitRuleAction This object indicates the action type to be used after the number of learned MAC addresses reaches the upper threshold.	Enumerationr/w Enumerated Values: 1 discard 2 forward	.1.3.6.1.4.1.2011.5.25.42.2.1.12.1.13
hwMacLimitRuleAlarm This object indicates whether the alarm for MAC address learning restriction is enabled.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.5.25.42.2.1.12.1.14
hwMacLimitRuleRowstatus This object indicates the row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.2.1.12.1.51
hwMacRuleDynAddressLearnNum The number of dynamic MAC address learned by the board.	Integer32 Constraints: range: 0-131072	.1.3.6.1.4.1.2011.5.25.42.2.1.12.1.52

A table containing the global mac-address learning-limit rules and apply ports.

hwMacLimitApplyRuleEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.13.1

Entries of the global mac-address learning-limit rules and apply ports table.

Indexes

hwMacLimitApplyPort hwMacLimitApplyVlanId

Column	Syntax	OID
hwMacLimitApplyPort The port number which apply the global mac-address learning-limit rule.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.42.2.1.13.1.1
hwMacLimitApplyVlanId The vlan id which apply the global mac-address learning-limit rule.	Integer32 Constraints: range: 0-4094	.1.3.6.1.4.1.2011.5.25.42.2.1.13.1.2
hwMacLimitApplyRuleName The global mac-address learning-limit rule name.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.25.42.2.1.13.1.11
hwMacLimitApplyRowstatus The operating state of the row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.2.1.13.1.51

A table showing the number of mac-address items by interface index.

hwMacIfStatisticsEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.15.1

Entries of the statistics of mac-address table.

Indexes

hwMacIfStatisticsIfIndex

Column	Syntax	OID
hwMacIfStatisticsIfIndex The interface index which is correlative to the hwIfMacStatistics table.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.42.2.1.15.1.1
hwMacIfStatistics The number of the mac-address items.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.2.1.15.1.2

This table is used to describe MAC capacity statistics on an interface board.

hwMacSlotStatisticsEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.16.1

Entries of the statistics of mac-address table.

Indexes

hwMacSlotStatisticsSlotId

Column	Syntax	OID
hwMacSlotStatisticsSlotId This object indicates the interface board ID.	Integer32 Constraints: range: 0-128	.1.3.6.1.4.1.2011.5.25.42.2.1.16.1.1
hwMacSlotStatistics This object indicates the number of MAC addresses learned based on the interface board ID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.2.1.16.1.2
hwMacSlotStatisticsSpecify This object indicates the maximum MAC capacity on the interface board.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.2.1.16.1.3
hwMacSlotUsage This object indicates the MAC address utilization ratio on the interface board.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.2011.5.25.42.2.1.16.1.4
hwMacSlotUsageThreshold This object indicates the MAC address threshold on the interface board.	Integer32 Constraints: range: 1-99	.1.3.6.1.4.1.2011.5.25.42.2.1.16.1.5

A table showing the number of mac-address items by VLAN ID.

hwMacVlanStatisticsEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.17.1

Entries of the statistics of mac-address table.

Indexes

hwMacVlanStatisticsVlanId

Column	Syntax	OID
hwMacVlanStatisticsVlanId The VLAN ID which is correlative to the hwMacVlanStatistics table.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.42.2.1.17.1.1
hwMacVlanStatistics The number of the mac-address items.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.2.1.17.1.2

A table showing the number of mac-address items by VSI name.

hwMacVsiStatisticsEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.18.1

Entries of the statistics of mac-address table.

Indexes

hwMacVsiStatisticsVsiName

Column	Syntax	OID
hwMacVsiStatisticsVsiName The VSI name which is correlative to the hwMacVsiStatistics table.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.2011.5.25.42.2.1.18.1.1
hwMacVsiStatistics The number of the mac-address items.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.2.1.18.1.2

This table is used to query MAC address learning suppression based on a PW.

hwPwMacLimitEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.19.1

Entries of a rule table for PW-based MAC learning limit.

Indexes

hwPwMacLimitVsiName hwPwMacLimitPwName

Column	Syntax	OID
hwPwMacLimitVsiName This object indicates the VSI name of MAC address learning suppression based on a PW.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.25.42.2.1.19.1.1
hwPwMacLimitPwName This object indicates the PW name of MAC address learning suppression.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.2011.5.25.42.2.1.19.1.2
hwPwMacLimitMaxMac This object indicates the maximum number of MAC addresses that can be learned. The value of 0 indicates no limit on the number of MAC addresses that can be learned.	Integer32r/w Constraints: range: 0-131072	.1.3.6.1.4.1.2011.5.25.42.2.1.19.1.3
hwPwMacLimitMaxRate This object indicates the maximum rate of MAC address learning. The value of 0 indicates that the rate of MAC address learning is not limited.	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.2011.5.25.42.2.1.19.1.4
hwPwMacLimitAction This object indicates whether packets are forwarded after the number of learned MAC addresses reaches the upper threshold.	Enumerationr/w Enumerated Values: 1 discard 2 forward	.1.3.6.1.4.1.2011.5.25.42.2.1.19.1.5
hwPwMacLimitAlarm This object indicates whether the alarm is enabled after the number of learned MAC addresses reaches the upper threshold.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.42.2.1.19.1.6
hwPwMacLimitRowstatus This object indicates the row status of hwPwMacLimitTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.2.1.19.1.7
hwPwMacAddressLearn This object indicates whether MAC address learning is enabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.42.2.1.19.1.8
hwPwMacDynAddressLearnNum This object indicates the number of dynamically learned MAC addresses.	Integer32 Constraints: range: 0-131072	.1.3.6.1.4.1.2011.5.25.42.2.1.19.1.9

A table enable the MAC spoofing defend.

hwMacSpoofingDefendEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.20.1

Entries of the MAC spoofing defend table.

Indexes

hwMacSpoofingDefendPort

Column	Syntax	OID
hwMacSpoofingDefendPort The port number which will be configured 1.1.1 MAC spoofing defend.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.42.2.1.20.1.1
hwMacSpoofingDefendEnabled When this object is set to 'enabled(1)' MAC spoofing defend is enabled on this port else disabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.42.2.1.20.1.2

This is a rule table for SLOT-based MAC learning limit.

hwSlotMacLimitEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.25.1

Entries of a rule table for SLOT-based MAC learning limit.

Indexes

hwSlotMacLimitId

Column	Syntax	OID
hwSlotMacLimitId This object indicates id of the SLOT that is configured with SLOT-based MAC learning limit.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.2.1.25.1.1
hwSlotMacLimitMaxMac The value of this object specifies the maximum number of MAC addresses that can be learnt. 0 indicates no limit.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.2.1.25.1.2
hwSlotMacLimitMaxRate The value of this object specifies the maximum rate for MAC address learning. 0 indicates no limit.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.2.1.25.1.3
hwSlotMacLimitAction The value of this object specifies whether packets are forwarded or discarded after the number of MAC addresses that are learnt reaches the upper limit: 1: packets are discarded 2: packets are forwarded	Enumerationr/w Enumerated Values: 1 discard 2 forward	.1.3.6.1.4.1.2011.5.25.42.2.1.25.1.4
hwSlotMacLimitAlarm The value of this object specifies whether the alarm is enabled or disabled after the number of MAC addresses that are learnt reaches the upper limit: 1: alarm is enabled 2: alarm is disabled	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.5.25.42.2.1.25.1.5
hwSlotMacLimitRowstatus This object indicates the RowStatus of hwSlotMacLimitTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.2.1.25.1.6

Group-MAC configuration table of standard L2 protocol tunnel.

hwL2ProtclTnlStdEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.27.1

This object indicates Group-MAC configuration table for standard L2 protocol tunnel.

Indexes

hwL2ProtclTnlStdProtclName

Column	Syntax	OID
hwL2ProtclTnlStdProtclName This object indicates protocol name of standard L2 protocol tunnel.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.25.42.2.1.27.1.1
hwL2ProtclTnlStdProtclMacAddr This object indicates protocol MAC-Address of standard L2 protocol tunnel.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.42.2.1.27.1.2
hwL2ProtclTnlStdEncapType This object indicates encapsulation type of standard L2 protocol tunnel.	Enumeration Enumerated Values: 1 ethernetii 2 snap 3 llc 4 others	.1.3.6.1.4.1.2011.5.25.42.2.1.27.1.3
hwL2ProtclTnlStdProtclType This object indicates protocol type of standard L2 protocol tunnel.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.2.1.27.1.4
hwL2ProtclTnlStdGroupMacAddr This object indicates group-MAC of standard L2 protocol tunnel.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.42.2.1.27.1.5
hwL2ProtclTnlStdGroupDefault This object indicates default group-MAC(0100-0ccd-cdd0) of standard L2 protocol tunnel.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.42.2.1.27.1.6
hwL2ProtclTnlStdPriority This object indicates priority of standard L2 protocol tunnel.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.5.25.42.2.1.27.1.7

Group-MAC configuration table of customize L2 protocol tunnel.

hwL2ProtclTnlCusEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.28.1

This object indicates Group-MAC configuration table for customize L2 protocol tunnel.

Indexes

hwL2ProtclTnlCusProtclName

Column	Syntax	OID
hwL2ProtclTnlCusProtclName This object indicates protocol name of customize L2 protocol tunnel.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.25.42.2.1.28.1.1
hwL2ProtclTnlCusProtclMacAddr This object indicates protocol MAC-Address of customize L2 protocol tunnel.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.42.2.1.28.1.2
hwL2ProtclTnlCusEncapType This object indicates encapsulation type of customize L2 protocol tunnel.	Enumerationr/w Enumerated Values: 1 ethernetii 2 snap 3 llc 4 others	.1.3.6.1.4.1.2011.5.25.42.2.1.28.1.3
hwL2ProtclTnlCusProtclType This object indicates protocol type of customize L2 protocol tunnel.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.2.1.28.1.4
hwL2ProtclTnlCusGroupMacAddr This object indicates group-MAC of customize L2 protocol tunnel.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.42.2.1.28.1.5
hwL2ProtclTnlCusGroupDefault This object indicates default group-MAC(0100-0ccd-cdd0) of customize L2 protocol tunnel.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.42.2.1.28.1.6
hwL2ProtclTnlCusPriority This object indicates priority of customize L2 protocol tunnel.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.5.25.42.2.1.28.1.7
hwL2ProtclTnlCusRowStatus Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.2.1.28.1.8

Port configuration table of L2 protocol tunnel.

hwL2ProtclTnlEnableEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.29.1

This object indicates port configuration table of L2 protocol tunnel.

Indexes

hwL2ProtclTnlEnableIfIndex hwL2ProtclTnlEnableProtclName

Column	Syntax	OID
hwL2ProtclTnlEnableIfIndex This object indicates interface index of port configuration of L2 protocol tunnel.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.42.2.1.29.1.1
hwL2ProtclTnlEnableProtclName This object indicates protocol name of port configuration of L2 protocol tunnel.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.25.42.2.1.29.1.2
hwL2ProtclTnlEnableTransMode This object indicates transparent mode of port configuration of L2 protocol tunnel.	Enumerationr/w Enumerated Values: 1 tagged 2 untagged	.1.3.6.1.4.1.2011.5.25.42.2.1.29.1.3
hwL2ProtclTnlEnableTagListLow This object indicates VLAN list low of port configuration of L2 protocol tunnel.	OctetStringr/w Constraints: range: 256-256	.1.3.6.1.4.1.2011.5.25.42.2.1.29.1.4
hwL2ProtclTnlEnableTagListHigh This object indicates VLAN list high of port configuration of L2 protocol tunnel.	OctetStringr/w Constraints: range: 256-256	.1.3.6.1.4.1.2011.5.25.42.2.1.29.1.5
hwL2ProtclTnlEnableDropthresholdRate This object indicates drop threshold rate(packet per second) of port configuration of L2 protocol tunnel.	Integer32r/w Constraints: range: 0-4096	.1.3.6.1.4.1.2011.5.25.42.2.1.29.1.6
hwL2ProtclTnlEnableRowStatus Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.42.2.1.29.1.7

Statistics table of L2 protocol tunnel.

hwL2ProtclTnlStatisticsEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.30.1

This object indicates statistics table of L2 protocol tunnel.

Indexes

hwL2ProtclTnlStatisticsIfIndex hwL2ProtclTnlStatisticsProtclName

Column	Syntax	OID
hwL2ProtclTnlStatisticsIfIndex This object indicates interface index of statistics table of L2 protocol tunnel.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.42.2.1.30.1.1
hwL2ProtclTnlStatisticsProtclName This object indicates protocol name of statistics table of L2 protocol tunnel.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.25.42.2.1.30.1.2
hwL2ProtclTnlStatisticsDropthrhldRate This object indicates drop threshold rate(packets per second) of statistics table of L2 protocol tunnel.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.2.1.30.1.3
hwL2ProtclTnlStatisticsInputPkts This object indicates the number of input packets of statistics table of L2 protocol tunnel.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.2.1.30.1.4
hwL2ProtclTnlStatisticsOutputPkts This object indicates the number of output packets of statistics table of L2 protocol tunnel.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.2.1.30.1.5
hwL2ProtclTnlStatisticsDropPkts This object indicates the number of drop packets of statistics table of L2 protocol tunnel.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.2.1.30.1.6

The query table of layer 2 Configured mac-address forwarding table.

hwCfgMacAddrQueryEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.32.1

Match entries of layer 2 Configured mac-address forwarding table lookup.

Indexes

hwCfgMacAddrQueryVlanId hwCfgMacAddrQueryVsiName hwCfgMacAddrQuerySiName hwCfgMacAddrQueryBridgeId hwCfgMacAddrQueryMacAddr hwCfgMacAddrQueryConditionMode hwCfgMacAddrQueryConditionStringA hwCfgMacAddrQueryConditionStringB hwCfgMacAddrQueryConditionDigitA hwCfgMacAddrQueryConditionDigitB hwCfgMacAddrQueryConditionDigitC

Column	Syntax	OID
hwCfgMacAddrQueryVlanId The VLAN ID for index of layer 2 Configured mac-address query table.	Q-BRIDGE-MIBVlanIdOrNone Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.42.2.1.32.1.1
hwCfgMacAddrQueryVsiName The vsi name for index of layer 2 Configured mac-address query table.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.25.42.2.1.32.1.2
hwCfgMacAddrQuerySiName The service instance name for index of layer 2 Configured mac-address query table.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.25.42.2.1.32.1.3
hwCfgMacAddrQueryBridgeId The bridge ID for index of layer 2 Configured mac-address query table.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2011.5.25.42.2.1.32.1.4
hwCfgMacAddrQueryMacAddr A unicast MAC address for index of layer 2 Configured mac-address query table.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.42.2.1.32.1.5
hwCfgMacAddrQueryConditionMode Mode for query condition of layer 2 Configured mac-address query table.	Enumeration Enumerated Values: 1 showall 2 showbymac 3 showbymacvlan 4 showbytype 5 showbytypevlan 6 showbytypeport 7 showbytypeportvlan 8 showbyvlan 9 showbyport 10 showbyportvlan 11 showbymacvsi 12 showbytypevsi 13 showbytypeportvsi 14 showbyvsi 15 showbyportvsi	.1.3.6.1.4.1.2011.5.25.42.2.1.32.1.6
hwCfgMacAddrQueryConditionStringA String A (may be VSI or SI etc.) for query condition of layer 2 Configured mac-address query table.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.25.42.2.1.32.1.7
hwCfgMacAddrQueryConditionStringB String B (may be MAC or MAC type etc.) for query condition of layer 2 Configured mac-address query table.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.2011.5.25.42.2.1.32.1.8
hwCfgMacAddrQueryConditionDigitA Digit A (may be VLAN ID etc.) for query condition of layer 2 Configured mac-address query table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.42.2.1.32.1.9
hwCfgMacAddrQueryConditionDigitB Digit B (may be IF index etc.) for query condition of layer 2 Configured mac-address query table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.42.2.1.32.1.10
hwCfgMacAddrQueryConditionDigitC Digit C (other integer info) for query condition of layer 2 Configured mac-address query table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.42.2.1.32.1.11
hwCfgMacAddrQueryType The entry type for match item of layer 2 Configured mac-address query table.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.25.42.2.1.32.1.12
hwCfgMacAddrQueryIfIndex The interface index for match item of layer 2 Configured mac-address query table.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.42.2.1.32.1.13
hwCfgMacAddrQueryPeVlanId The PE VLAN ID for match item of layer 2 Configured mac-address query table.	Q-BRIDGE-MIBVlanIdOrNone Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.42.2.1.32.1.14
hwCfgMacAddrQueryCeVlanId The CE VLAN ID for match item of layer 2 Configured mac-address query table.	Q-BRIDGE-MIBVlanIdOrNone Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.42.2.1.32.1.15
hwCfgMacAddrQueryCedefaultFlag The CE default flag for match item of layer 2 Configured mac-address query table.	Enumeration Enumerated Values: 0 nocedefault 1 cedefault	.1.3.6.1.4.1.2011.5.25.42.2.1.32.1.16
hwCfgMacAddrQueryAtmIfIndex The ATM interface index for match item of layer 2 Configured mac-address query table.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.42.2.1.32.1.17
hwCfgMacAddrQueryVpi The VPI for match item of layer 2 Configured mac-address query table.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2011.5.25.42.2.1.32.1.18
hwCfgMacAddrQueryVci The VCI for match item of layer 2 Configured mac-address query table.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2011.5.25.42.2.1.32.1.19
hwCfgMacAddrQueryMacTunnel The MAC tunnel for match item of layer 2 Configured mac-address query table.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.25.42.2.1.32.1.20

The query table of layer 2 dynamic mac-address forwarding table.

hwDynMacAddrQueryEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.33.1

Match entries of layer 2 dynamic mac-address forwarding table lookup.

Indexes

hwDynMacAddrQueryVlanId hwDynMacAddrQueryVsiName hwDynMacAddrQuerySiName hwDynMacAddrQueryBridgeId hwDynMacAddrQueryMacAddr hwDynMacAddrQueryConditionMode hwDynMacAddrQueryConditionStringA hwDynMacAddrQueryConditionStringB hwDynMacAddrQueryConditionDigitA hwDynMacAddrQueryConditionDigitB hwDynMacAddrQueryConditionDigitC

Column	Syntax	OID
hwDynMacAddrQueryVlanId The VLAN ID for index of layer 2 dynamic mac-address query table.	Q-BRIDGE-MIBVlanIdOrNone Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.42.2.1.33.1.1
hwDynMacAddrQueryVsiName The vsi name for index of layer 2 dynamic mac-address query table.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.25.42.2.1.33.1.2
hwDynMacAddrQuerySiName The service instance name for index of layer 2 dynamic mac-address query table.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.25.42.2.1.33.1.3
hwDynMacAddrQueryBridgeId The bridge ID for index of layer 2 dynamic mac-address query table.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2011.5.25.42.2.1.33.1.4
hwDynMacAddrQueryMacAddr A unicast MAC address for index of layer 2 dynamic mac-address query table.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.42.2.1.33.1.5
hwDynMacAddrQueryConditionMode Mode for query condition of layer 2 dynamic mac-address query table.	Enumeration Enumerated Values: 1 showall 2 showbymac 3 showbymacvlan 4 showbytype 5 showbytypevlan 6 showbytypeport 7 showbytypeportvlan 8 showbyvlan 9 showbyport 10 showbyportvlan 11 showbymacvsi 12 showbytypevsi 13 showbytypeportvsi 14 showbyvsi 15 showbyportvsi 16 showbyvsipw 17 showbytypeslot 18 showbytypeslotsourceslot 19 showbytypeslotvlan 20 showbytypeslotport 21 showbytypeslotportvlan 22 showbytypeslotvsi 23 showbytypeslotportvsi 24 showbytypeslotvsipw	.1.3.6.1.4.1.2011.5.25.42.2.1.33.1.6
hwDynMacAddrQueryConditionStringA String A (may be VSI or SI etc.) for query condition of layer 2 dynamic mac-address query table.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.25.42.2.1.33.1.7
hwDynMacAddrQueryConditionStringB String B (may be MAC or MAC type etc.) for query condition of layer 2 dynamic mac-address query table.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.2011.5.25.42.2.1.33.1.8
hwDynMacAddrQueryConditionDigitA Digit A (may be VLAN ID etc.) for query condition of layer 2 dynamic mac-address query table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.42.2.1.33.1.9
hwDynMacAddrQueryConditionDigitB Digit B (may be IF index etc.) for query condition of layer 2 dynamic mac-address query table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.42.2.1.33.1.10
hwDynMacAddrQueryConditionDigitC Digit C (other integer info) for query condition of layer 2 dynamic mac-address query table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.42.2.1.33.1.11
hwDynMacAddrQueryType The entry type for match item of layer 2 dynamic mac-address query table.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.25.42.2.1.33.1.12
hwDynMacAddrQueryIfIndex The interface index for match item of layer 2 dynamic mac-address query table.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.42.2.1.33.1.13
hwDynMacAddrQueryPeVlanId The PE VLAN ID for match item of layer 2 dynamic mac-address query table.	Q-BRIDGE-MIBVlanIdOrNone Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.42.2.1.33.1.14
hwDynMacAddrQueryCeVlanId The CE VLAN ID for match item of layer 2 dynamic mac-address query table.	Q-BRIDGE-MIBVlanIdOrNone Type Constraints: range: 0..4094	.1.3.6.1.4.1.2011.5.25.42.2.1.33.1.15
hwDynMacAddrQueryAtmIfIndex The ATM interface index for match item of layer 2 dynamic mac-address query table.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2011.5.25.42.2.1.33.1.16
hwDynMacAddrQueryVpi The VPI for match item of layer 2 dynamic mac-address query table.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2011.5.25.42.2.1.33.1.17
hwDynMacAddrQueryVci The VCI for match item of layer 2 dynamic mac-address query table.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2011.5.25.42.2.1.33.1.18
hwDynMacAddrQueryPeerIp The peer ip address for match item of layer 2 dynamic mac-address query table.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.42.2.1.33.1.19
hwDynMacAddrQueryPwId The PW ID for match item of layer 2 dynamic mac-address query table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.42.2.1.33.1.20
hwDynMacAddrQueryMacTunnel The MAC tunnel for match item of layer 2 dynamic mac-address query table.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.25.42.2.1.33.1.21
hwDynMacAddrQueryAgingTime The aging time for match item of layer 2 dynamic mac-address query table.	Integer32 Constraints: range: 0-1000000	.1.3.6.1.4.1.2011.5.25.42.2.1.33.1.22

The MAC address information of layer 2 mac-address database.

hwMacInfoQueryEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.34.1

Match information of layer 2 mac-address database.

Indexes

hwMacInfoQueryConditionMode hwMacInfoQueryConditionStringA hwMacInfoQueryConditionStringB hwMacInfoQueryConditionStringC hwMacInfoQueryConditionDigitA hwMacInfoQueryConditionDigitB hwMacInfoQueryConditionDigitC

Column	Syntax	OID
hwMacInfoQueryConditionMode Mode for query condition of layer 2 dynamic mac-address query table.	Enumeration Enumerated Values: 1 showtotalnumberbyall 2 showtotalnumberbytype 3 showtotalnumberbytypevlan 4 showtotalnumberbytypeport 5 showtotalnumberbytypeportvlan 6 showtotalnumberbyvlan 7 showtotalnumberbyport 8 showtotalnumberbyportvlan 9 showtotalnumberbytypevsi 10 showtotalnumberbytypeportvsi 11 showtotalnumberbyvsi 12 showtotalnumberbyportvsi 13 showtotalnumberbyvsipw 14 showtotalnumberbytypeslot 15 showtotalnumberbytypeslotvlan 16 showtotalnumberbytypeslotport 17 showtotalnumberbytypeslotportvlan 18 showtotalnumberbytypeslotvsi 19 showtotalnumberbytypeslotportvsi 20 showtotalnumberbytypeslotvsipw 21 showcapacity	.1.3.6.1.4.1.2011.5.25.42.2.1.34.1.1
hwMacInfoQueryConditionStringA String A (may be VSI or SI etc.) for query condition of layer 2 mac-address database.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.25.42.2.1.34.1.2
hwMacInfoQueryConditionStringB String B (may be MAC or MAC type etc.) for query condition of layer 2 mac-address database.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.2011.5.25.42.2.1.34.1.3
hwMacInfoQueryConditionStringC String C (may be MAC tunnel etc.) for query condition of layer 2 mac-address database.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.25.42.2.1.34.1.4
hwMacInfoQueryConditionDigitA Digit A (may be VLAN ID etc.) for query condition of layer 2 mac-address database.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.42.2.1.34.1.5
hwMacInfoQueryConditionDigitB Digit B (may be IF index etc.) for query condition of layer 2 mac-address database.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.42.2.1.34.1.6
hwMacInfoQueryConditionDigitC Digit C (other integer info) for query condition of layer 2 mac-address database.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.42.2.1.34.1.7
hwMacInfoQueryTotalNumber The total number for match condition of layer 2 mac-address database.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.42.2.1.34.1.8
hwMacInfoQueryTotalLocalNumber The total local number for match condition of layer 2 mac-address database.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.42.2.1.34.1.9
hwMacInfoQueryTotalRemoteNumber The total remote number for match condition of layer 2 mac-address database.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.42.2.1.34.1.10
hwMacInfoQueryCapacity The capacity for match condition of layer 2 mac-address database.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.42.2.1.34.1.11

A table containing the VPLS over GRE information for device.

hwVplsOverGreEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.35.1

Entries of the VPLS over GRE table.

Indexes

hwVplsOverGrePwId

Column	Syntax	OID
hwVplsOverGrePwId The PW ID which will be configured over GRE.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.2.1.35.1.1
hwRemoteIp The remote ip address of the PW ID.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.42.2.1.35.1.2
hwVplsOverGreVsiName The vsi name which will be configured over GRE.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.25.42.2.1.35.1.3

A table containing the ByPass PW for VLL over GRE information for device.

hwVllByPassOverGreEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.36.1

Entries of the ByPass PW for VLL over GRE table.

Indexes

hwVLLACPortIndex

Column	Syntax	OID
hwVLLACPortIndex The port index which will be configured ByPass for VLL.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.2.1.36.1.1
hwVLLACPortName The Port name which will be configured ByPass for VLL.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.25.42.2.1.36.1.2

A table containing the unknown unicast alarm information for interface.

hwUnucFlowAlarmEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.37.1

Entries of unknown unicast alarm information for interface table.

Indexes

hwUNUCPortIndex

Column	Syntax	OID
hwUNUCPortIndex The port index which will be configured unknown unicast alarm.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.2.1.37.1.1
hwUNUCPortName The Port name which will be configured unknown unicast alarm.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.25.42.2.1.37.1.2
hwUNUCPortAlarmThreshold The port alarm threshold which will be configured unknown unicast alarm.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.2.1.37.1.3
hwUNUCPortRealFlow This object indicates that the unknown unicast traffic volume on the inbound interface exceeded the alarm threshold.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.2.1.37.1.4

A table containing the mac hop alarm information.

hwMacHopAlarmEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.38.1

Entries of mac hop alarm information for interface table.

Indexes

hwMacHopVlan hwMacHopVsiName hwMacHopBdID

Column	Syntax	OID
hwMacHopVlan The VLAN ID of mac hop.	Unsigned32 Constraints: range: 1-4094	.1.3.6.1.4.1.2011.5.25.42.2.1.38.1.1
hwMacHopVsiName The VSI of mac hop.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.25.42.2.1.38.1.2
hwMacHopBdID This object indicates that the MAC address flapping alarm is cleared.	Unsigned32 Constraints: range: 1-32768	.1.3.6.1.4.1.2011.5.25.42.2.1.38.1.3
hwMacHopPortName1 The Port name of Mac-hopping.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.25.42.2.1.38.1.4
hwMacHopPortName2 The Port name of Mac-hopping.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.25.42.2.1.38.1.5
hwMacHopPortName3 The Port name of Mac-hopping.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.25.42.2.1.38.1.6
hwMacHopPortName4 The Port name of Mac-hopping.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.25.42.2.1.38.1.7
hwMacHopPWInfo The PW info of Mac-hopping.	OctetString Constraints: range: 1-512	.1.3.6.1.4.1.2011.5.25.42.2.1.38.1.8
hwMacHopDetectMac This object indicates the MAC address flapping alarm.	OctetString Constraints: range: 1-512	.1.3.6.1.4.1.2011.5.25.42.2.1.38.1.9
hwMacHopTrustPort The trust Port name of Mac-hopping.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.25.42.2.1.38.1.10
hwMacHopTrustPeer The trust PW info of Mac-hopping.	OctetString Constraints: range: 1-512	.1.3.6.1.4.1.2011.5.25.42.2.1.38.1.11

A table containing the VPLS PW or EVPN over Ldp over GRE information for device.

hwPwOverLdpOverGreEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.42.1

Entries of the VPLS PW or EVPN over Ldp over GRE table.

Indexes

hwVplsOverLdpOverGrePwId hwPeerRemoteIp hwEvpnOverLdpOverGreEvpnName

Column	Syntax	OID
hwVplsOverLdpOverGrePwId The PW ID which will be configured over ldp over GRE.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.2.1.42.1.1
hwPeerRemoteIp The remote ip address of the PW over EVPN.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.42.2.1.42.1.2
hwVplsOverLdpOverGreVsiName The vsi name which will be configured over ldp over GRE.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.25.42.2.1.42.1.3
hwEvpnOverLdpOverGreEvpnName The evpn name which will be configured over ldp over GRE.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.25.42.2.1.42.1.4

This table is used to manage the check on a PW's source port tunnel.

hwPwSourceTunnelCheckEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.43.1

Entries of the pw source tunnel check table.

Indexes

hwPwLabel hwTeLabel hwPortName

Column	Syntax	OID
hwPwLabel This object indicates the PW label.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.2.1.43.1.1
hwTeLabel This object indicates the TE tunnel label.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.2.1.43.1.2
hwPortName This object indicates the port name.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.25.42.2.1.43.1.3

This table is used to query the information table about the alarm that the interface board does not support this service.

hwBoardServiceMisMatchAlarmEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.44.1

Defined the entries between OSS and Router. They are SlotID, ServiceName and Precautions.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
hwBoardServiceMisMatchServiceName This object indicates the feature name.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.2011.5.25.42.2.1.44.1.1
hwBoardServiceMisMatchPrecautions This object indicates the call information.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.2011.5.25.42.2.1.44.1.2

This table is used to manage information about the alarm for tunnel types that the EVPN public network does not support.

hwEVPNNotSupportTunnelEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.45.1

Entries of the EVPN table.

Indexes

hwEVPNPeerRemoteIp hwNotSupportTunnelEvpnName

Column	Syntax	OID
hwEVPNPeerRemoteIp This object indicates the remote IP address of the EVPN public network.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.42.2.1.45.1.1
hwNotSupportTunnelEvpnName This object indicates the name of the EVPN public network that does not support traffic forwarding.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.25.42.2.1.45.1.2

This table is used to manage tunnels that the VPLS public network does not support.

hwVPLSNotSupportTunnelEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.46.1

Entries of the VPLS table.

Indexes

hwNotSupportTunnelPwId hwPWPeerRemoteIp

Column	Syntax	OID
hwNotSupportTunnelPwId This object indicates the PW index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.42.2.1.46.1.1
hwPWPeerRemoteIp This object indicates the remote IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.42.2.1.46.1.2
hwNotSupportTunnelVSIName This object indicates the VSI name.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.25.42.2.1.46.1.3

This table contains statistics about suppressed packets and bytes based on a Layer 2 interface and a VLAN.

hwPVSuppressionStatisticEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.48.1

Provides the information of the PV suppression statistic.

Indexes

hwPVStatisticIfIndex hwPVStatisticVlan

Column	Syntax	OID
hwPVStatisticIfIndex This object indicates the interface index value.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.42.2.1.48.1.1
hwPVStatisticVlan This object indicates the VLAN ID of the interface.	Unsigned32 Constraints: range: 1-4094	.1.3.6.1.4.1.2011.5.25.42.2.1.48.1.2
hwPVStatisticTime This object indicates the date and time when packet statistics were deleted last time.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.25.42.2.1.48.1.3
hwPVUcInPassPack This object indicates the number of passed packets for unknown unicast traffic in the inbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.48.1.4
hwPVUcInPassByte This object indicates the number of passed bytes for unknown unicast traffic in the inbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.48.1.5
hwPVUcInDropPack This object indicates the number of dropped packets for unknown unicast traffic in the inbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.48.1.6
hwPVUcInDropByte This object indicates the number of dropped bytes for unknown unicast traffic in the inbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.48.1.7
hwPVUcOutPassPack This object indicates the number of passed packets for unknown unicast traffic in the outbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.48.1.8
hwPVUcOutPassByte This object indicates the number of passed bytes for unknown unicast traffic in the outbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.48.1.9
hwPVUcOutDropPack This object indicates the number of dropped packets for unknown unicast traffic in the outbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.48.1.10
hwPVUcOutDropByte This object indicates the number of dropped bytes for unknown unicast traffic in the outbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.48.1.11
hwPVMulInPassPack This object indicates the number of passed packets for multicast traffic in the inbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.48.1.12
hwPVMulInPassByte This object indicates the number of passed bytes for multicast traffic in the inbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.48.1.13
hwPVMulInDropPack This object indicates the number of dropped packets for multicast traffic in the inbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.48.1.14
hwPVMulInDropByte This object indicates the number of dropped bytes for multicast traffic in the inbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.48.1.15
hwPVMulOutPassPack This object indicates the number of passed packets for multicast traffic in the outbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.48.1.16
hwPVMulOutPassByte This object indicates the number of passed bytes for multicast traffic in the outbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.48.1.17
hwPVMulOutDropPack This object indicates the number of dropped packets for multicast traffic in the outbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.48.1.18
hwPVMulOutDropByte This object indicates the number of dropped bytes for multicast traffic in the outbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.48.1.19
hwPVBrInPassPack This object indicates the number of passed packets for broadcast traffic in the inbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.48.1.20
hwPVBrInPassByte This object indicates the number of passed bytes for broadcast traffic in the inbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.48.1.21
hwPVBrInDropPack This object indicates the number of dropped packets for broadcast traffic in the inbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.48.1.22
hwPVBrInDropByte This object indicates the number of dropped bytes for broadcast traffic in the inbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.48.1.23
hwPVBrOutPassPack This object indicates the number of passed packets for broadcast traffic in the outbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.48.1.24
hwPVBrOutPassByte This object indicates the number of passed bytes for broadcast traffic in the outbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.48.1.25
hwPVBrOutDropPack This object indicates the number of dropped packets for broadcast traffic in the outbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.48.1.26
hwPVBrOutDropByte This object indicates the number of dropped bytes for broadcast traffic in the outbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.48.1.27

This table contains statistics about suppressed packets and bytes based on an interface and its sub-interface.

hwPortSuppressionStatisticEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.49.1

Provides the information of the Port suppression statistic.

Indexes

hwPortStatisticIfIndex

Column	Syntax	OID
hwPortStatisticIfIndex This object indicates the interface index value.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.42.2.1.49.1.1
hwPortStatisticTime This object indicates the date and time when packet statistics were deleted last time.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.25.42.2.1.49.1.2
hwPortUcInPassPack This object indicates the number of passed packets for unknown unicast traffic in the inbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.49.1.3
hwPortUcInPassByte This object indicates the number of passed bytes for unknown unicast traffic in the inbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.49.1.4
hwPortUcInDropPack This object indicates the number of dropped packets for unknown unicast traffic in the inbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.49.1.5
hwPortUcInDropByte This object indicates the number of dropped bytes for unknown unicast traffic in the inbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.49.1.6
hwPortUcOutPassPack This object indicates the number of passed packets for unknown unicast traffic in the outbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.49.1.7
hwPortUcOutPassByte This object indicates the number of passed bytes for unknown unicast traffic in the outbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.49.1.8
hwPortUcOutDropPack This object indicates the number of dropped packets for unknown unicast traffic in the outbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.49.1.9
hwPortUcOutDropByte This object indicates the number of dropped bytes for unknown unicast traffic in the outbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.49.1.10
hwPortMulInPassPack This object indicates the number of passed packets for multicast traffic in the inbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.49.1.11
hwPortMulInPassByte This object indicates the number of passed bytes for multicast traffic in the inbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.49.1.12
hwPortMulInDropPack This object indicates the number of dropped packets for multicast traffic in the inbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.49.1.13
hwPortMulInDropByte This object indicates the number of dropped bytes for multicast traffic in the inbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.49.1.14
hwPortMulOutPassPack This object indicates the number of passed packets for multicast traffic in the outbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.49.1.15
hwPortMulOutPassByte This object indicates the number of passed bytes for multicast traffic in the outbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.49.1.16
hwPortMulOutDropPack This object indicates the number of dropped packets for multicast traffic in the outbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.49.1.17
hwPortMulOutDropByte This object indicates the number of dropped bytes for multicast traffic in the outbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.49.1.18
hwPortBrInPassPack This object indicates the number of passed packets for broadcast traffic in the inbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.49.1.19
hwPortBrInPassByte This object indicates the number of passed bytes for broadcast traffic in the inbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.49.1.20
hwPortBrInDropPack This object indicates the number of dropped packets for broadcast traffic in the inbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.49.1.21
hwPortBrInDropByte This object indicates the number of dropped bytes for broadcast traffic in the inbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.49.1.22
hwPortBrOutPassPack This object indicates the number of passed packets for broadcast traffic in the outbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.49.1.23
hwPortBrOutPassByte This object indicates the number of passed bytes for broadcast traffic in the outbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.49.1.24
hwPortBrOutDropPack This object indicates the number of dropped packets for broadcast traffic in the outbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.49.1.25
hwPortBrOutDropByte This object indicates the number of dropped bytes for broadcast traffic in the outbound direction.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.49.1.26

This table is used to manage MAC accounting statistics.

hwMacAccountStatisticEntry row .1.3.6.1.4.1.2011.5.25.42.2.1.50.1

Entry for mac accounting information.

Indexes

hwMacAccountStatisticIfindex hwMacAccountStatisticMacAddr

Column	Syntax	OID
hwMacAccountStatisticIfindex This object indicates the interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.42.2.1.50.1.1
hwMacAccountStatisticMacAddr This object indicates the MAC address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.5.25.42.2.1.50.1.2
hwMacAccountStatisticIfName This object indicates the interface name.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.25.42.2.1.50.1.3
hwMacAccountStatisticIfInBytes This object indicates the number of bytes in the inbound direction of an interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.50.1.4
hwMacAccountStatisticIfInPkts This object indicates the number of packets in the inbound direction of an interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.50.1.5
hwMacAccountStatisticIfOutBytes This object indicates the number of bytes in the outbound direction of an interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.50.1.6
hwMacAccountStatisticIfOutPkts This object indicates the number of packets in the outbound direction of an interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.42.2.1.50.1.7