HUAWEI-IPFPM-MIB Table View

IPFPM authenticaiton configuration information.
The index of this table is hwIpfpmMcpAuthKeyId.

hwIpfpmMcpAuthEntry row .1.3.6.1.4.1.2011.5.25.316.1.1.4.1

IPFPM authenticaiton configuration information.
The index of this entry is hwIpfpmMcpAuthKeyId.

Indexes

hwIpfpmMcpAuthKeyId

Column	Syntax	OID
hwIpfpmMcpAuthKeyId Identification of the authentication key.	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.2011.5.25.316.1.1.4.1.1
hwIpfpmMcpAuthType Authentication type of the key. The enumeration 'hmac-sha256(1)' represents the password is sent after being encrypted through hmac-sha256. By default, authentication is not configured.	HWIpfpmAuthTyper/w Type Values: 1 hmac-sha256	.1.3.6.1.4.1.2011.5.25.316.1.1.4.1.2
hwIpfpmMcpAuthKey The password used as an IPFPM authentication key.	OctetStringr/w Constraints: range: 0-432	.1.3.6.1.4.1.2011.5.25.316.1.1.4.1.3
hwIpfpmMcpAuthRowStatus Used for controlling the creation and deletion of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.316.1.1.4.1.4

IPFPM configuration information for a particular MCP test 
instance.The index of this table is hwIpfpmMcpInstId.

hwIpfpmMcpInstEntry row .1.3.6.1.4.1.2011.5.25.316.1.1.5.1

IPFPM configuration information for a particular MCP test
instance.The index of this entry is hwIpfpmMcpInstId.

Indexes

hwIpfpmMcpInstId

Column	Syntax	OID
hwIpfpmMcpInstId Identification of the test instance.	Integer32 Constraints: range: 16711681-16777214 range: 1-8355838	.1.3.6.1.4.1.2011.5.25.316.1.1.5.1.1
hwIpfpmMcpInstDesc This object indicates the IP FPM instance description on an MCP. if the string length is 0, it represents that it is not configured.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2011.5.25.316.1.1.5.1.2
hwIpfpmMcpLossRatioUpThres This value divided by 1000000 is the upper threshold of loss ratio(%) for alarm. The value 0 represents that it is not configured, and the alarm is not enabled.	Integer32r/w Constraints: range: 0-100000000	.1.3.6.1.4.1.2011.5.25.316.1.1.5.1.3
hwIpfpmMcpLossRatioLowThres This value divided by 1000000 is the lower threshold of loss ratio(%) for alarm recovery. The value 0 represents that it is not configured, and the alarm is not enabled.	Integer32r/w Constraints: range: 0-100000000	.1.3.6.1.4.1.2011.5.25.316.1.1.5.1.4
hwIpfpmMcpOneDelayUpThres Upper threshold of one-way delay(microsecond) for alarm. The value 0 represents that it is not configured, and the alarm is not enabled.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.2011.5.25.316.1.1.5.1.5
hwIpfpmMcpOneDelayLowThres Lower threshold of one-way delay(microsecond) for alarm recovery. The value 0 represents that it is not configured, and the alarm is not enabled.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.2011.5.25.316.1.1.5.1.6
hwIpfpmMcpTwoDelayUpThres Upper threshold of two-way delay(microsecond) for alarm. The value 0 represents that it is not configured, and the alarm is not enabled.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.2011.5.25.316.1.1.5.1.7
hwIpfpmMcpTwoDelayLowThres Lower threshold of two-way delay(microsecond) for alarm recovery. The value 0 represents that it is not configured, and the alarm is not enabled.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.2011.5.25.316.1.1.5.1.8
hwIpfpmMcpMeasureEnable This object indicates that the MCP instance measure function is 'enabled(1)' or 'disabled(2)'.	HWEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.316.1.1.5.1.9
hwIpfpmMcpInstRowStatus Used for controlling the creation and deletion of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.316.1.1.5.1.10
hwIpfpmMcpInstType This object indicates that the MCP instance type. 'unicast(0)' means unicast measurement instance. 'multicastsrc(1)' means multicast measurement source instance. 'multicastrecv(2)' means multicast measurement receiver …	HWIpfpmInstTyper/w Type Values: 0 unicast 1 multicastsrc 2 multicastrecv	.1.3.6.1.4.1.2011.5.25.316.1.1.5.1.11
hwIpfpmMcpSourceInstId This object indicates the source instance of multicastrecv. This object is only valid when hwIpfpmMcpInstType is 'multicastrecv(2)'. We can ingore this object value when hwIpfpmMcpInstType is not 'multicastrecv(2)'.	Integer32r/w Constraints: range: 16711681-16777214 range: 0-0	.1.3.6.1.4.1.2011.5.25.316.1.1.5.1.12

IPFPM DCPs information for a particular MCP test instance.
The indexes of this table are hwIpfpmMcpInstId and hwIpfpmMcpDcpId.

hwIpfpmMcpDcpEntry row .1.3.6.1.4.1.2011.5.25.316.1.1.6.1

IPFPM DCPs information for a particular MCP test instance.
The indexes of this entry are hwIpfpmMcpInstId and hwIpfpmMcpDcpId.

Indexes

hwIpfpmMcpInstId hwIpfpmMcpDcpId

Column	Syntax	OID
hwIpfpmMcpDcpId Identification of DCP which belongs to the test instance.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.316.1.1.6.1.1
hwIpfpmMcpDcpRowStatus Used for controlling the creation and deletion of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.316.1.1.6.1.2

IPFPM ACHs(Atomic Closed Hop) information for a particular 
MCP test instance.The indexes of this table are hwIpfpmMcpInstId and hwIpfpmMcpAchId.

hwIpfpmMcpAchEntry row .1.3.6.1.4.1.2011.5.25.316.1.1.7.1

IPFPM ACHs(Atomic Closed Hop) information for a particular
MCP test instance.The indexes of this entry are hwIpfpmMcpInstId and hwIpfpmMcpAchId.

Indexes

hwIpfpmMcpInstId hwIpfpmMcpAchId

Column	Syntax	OID
hwIpfpmMcpAchId The object indicates the identification of the ACH.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2011.5.25.316.1.1.7.1.1
hwIpfpmMcpFlowType The object indicates the flow that the ACH monitors is 'forward(1)' or 'backward(2)', 'bidirectional(3)'. The value none(0) represents that it is not configured.	HWIpfpmMcpFlowTyper/w Type Values: 0 none 1 forward 2 backward 3 bidirectional	.1.3.6.1.4.1.2011.5.25.316.1.1.7.1.2
hwIpfpmMcpAchRowStatus Used for controlling the creation and deletion of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.316.1.1.7.1.3

IPFPM TLPs(Target Logical Port) information for a particular 
MCP ACH.The indexes of this table are hwIpfpmMcpInstId and hwIpfpmMcpAchId and hwIpfpmMcpTlpRole and hwIpfpmMcpTlpDcpId and hwIpfpmMcpTlpId.

hwIpfpmMcpTlpEntry row .1.3.6.1.4.1.2011.5.25.316.1.1.8.1

IPFPM TLPs(Target Logical Port) information for a particular
MCP ACH.The indexes of this entry are hwIpfpmMcpInstId and hwIpfpmMcpAchId and hwIpfpmMcpTlpRole and hwIpfpmMcpTlpDcpId and hwIpfpmMcpTlpId.

Indexes

hwIpfpmMcpInstId hwIpfpmMcpAchId hwIpfpmMcpTlpRole hwIpfpmMcpTlpDcpId hwIpfpmMcpTlpId

Column	Syntax	OID
hwIpfpmMcpTlpRole The object indicates the TLP belongs to 'in-group(1)' or 'out-group(2)' of the ACH.	HWIpfpmMcpTlpRole Type Values: 1 in-group 2 out-group	.1.3.6.1.4.1.2011.5.25.316.1.1.8.1.1
hwIpfpmMcpTlpDcpId The object indicates the dcp which the tlp belongs to.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.316.1.1.8.1.2
hwIpfpmMcpTlpId The object indicates the identification of the TLP.	Integer32 Constraints: range: 1-16777215	.1.3.6.1.4.1.2011.5.25.316.1.1.8.1.3
hwIpfpmMcpTlpRowStatus Used for controlling the creation and deletion of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.316.1.1.8.1.4

The information is that the multicast source instance referred by some multicast receiver instances.
The index of this table is hwIpfpmMcpInstId.

hwIpfpmMcpSrcInstReferQueryEntry row .1.3.6.1.4.1.2011.5.25.316.1.1.9.1

The information is that the multicast source instance referred by some multicast receiver instances.
The index of this entry is hwIpfpmMcpInstId.

Indexes

hwIpfpmMcpInstId

Column	Syntax	OID
hwIpfpmMcpSrcInstReferCnt The object indicates the counter that the multicast source instance referred by some multicast receiver instances.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.1.1.9.1.1

Index of a particular test instance and ACH.
The indexes of this table are hwIpfpmMcpInstId and hwIpfpmMcpAchId.

hwIpfpmMcpInstAchIndexEntry row .1.3.6.1.4.1.2011.5.25.316.1.2.3.1

Index of a particular test instance and ACH.
The indexes of this entry are hwIpfpmMcpInstId and hwIpfpmMcpAchId.

Indexes

hwIpfpmMcpInstId hwIpfpmMcpAchId

Column	Syntax	OID
hwIpfpmMcpSeqNo Sequence of a particular test instance and ACH.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.316.1.2.3.1.1

Loss measure statistics of an interval for a particular 
test instance.The indexes of this table are hwIpfpmMcpInstId and hwIpfpmMcpAchId and hwIpfpmMcpSeqNoHigh and hwIpfpmMcpSeqNoLow.

hwIpfpmMcpLossStatsEntry row .1.3.6.1.4.1.2011.5.25.316.1.2.4.1

Loss measure statistics of an interval for a particular
test instance.The indexes of this entry are hwIpfpmMcpInstId and hwIpfpmMcpAchId and hwIpfpmMcpSeqNoHigh and hwIpfpmMcpSeqNoLow.

Indexes

hwIpfpmMcpInstId hwIpfpmMcpAchId hwIpfpmMcpSeqNoHigh hwIpfpmMcpSeqNoLow

Column	Syntax	OID
hwIpfpmMcpSeqNoHigh High 32-bit of the hwIpfpmMcpSeqNo.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.1
hwIpfpmMcpSeqNoLow Low 32-bit of the hwIpfpmMcpSeqNo.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.2
hwIpfpmMcpLossErrInfo The error code to indicate the validity and the invalidation reason of an interval's loss measure statistics.	HWIpfpmStatErrInfo Type Values: 0 noErr 1 initialIntervalForward 2 initialIntervalBackward 3 initialIntervalBidirection 4 inconsistInterval 5 asynClock 6 incompleteDataForward 7 incompleteDataBackward 8 incompleteDataBidirection 9 noFlowDataForward 10 noFlowDataBackward 11 noFlowDataBidirection 12 errFlowDataForward 13 errFlowDataBackward 14 errFlowDataBidirection 15 multiDataOneDelay 16 multiDataTwoDelay 17 errDelayVariationForward 18 errDelayVariationBackward 19 errDelayVariationBidirection 20 errMultiSourceSwitch 21 unknownErr	.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.3
hwIpfpmMcpForwardLossPkts The absolute value of loss packets of forward flow measurement.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.4
hwIpfpmMcpForwardLossPktsSign The sign of loss packets of forward flow measurement. 1 means positive number, -1 means negative number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.5
hwIpfpmMcpForwardLossBytes The absolute value of loss bytes of forward flow measurement.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.6
hwIpfpmMcpForwardLossBytesSign The sign of loss bytes of forward flow measurement. 1 means positive number, -1 means negative number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.7
hwIpfpmMcpForwardPkts The packets of forward flow measurement.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.8
hwIpfpmMcpForwardBytes The bytes of forward flow measurement.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.9
hwIpfpmMcpForwardLossRatio This value divided by 1000000 is the loss ratio(%) of forward flow measurement.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.10
hwIpfpmMcpBackwardLossPkts The absolute value of loss packets of backward flow measurement.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.11
hwIpfpmMcpBackwardLossPktsSign The sign of loss loss packets of backward flow measurement. 1 means positive number, -1 means negative number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.12
hwIpfpmMcpBackwardLossBytes The absolute value of loss bytes of backward flow measurement.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.13
hwIpfpmMcpBackwardLossBytesSign The sign of loss bytes of backward flow measurement. 1 means positive number, -1 means negative number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.14
hwIpfpmMcpBackwardPkts The packets of backward flow measurement.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.15
hwIpfpmMcpBackwardBytes The bytes of backward flow measurement.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.16
hwIpfpmMcpBackwardLossRatio This value divided by 1000000 is the loss ratio(%) of backward flow measurement.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.17
hwIpfpmMcpForwardLossMMSType This value indicate multicastsrc type is 'master(0)' or 'slave(1)'.	HWIpfpmMMSType Type Values: 0 master 1 slave	.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.18
hwIpfpmMcpForwardLossMMSSwitch This value indicate whether multicastsrc switched in this period.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.19

One-way delay measure statistics of an interval for a 
particular test instance.The indexes of this table are hwIpfpmMcpInstId and hwIpfpmMcpAchId and hwIpfpmMcpSeqNoHigh and hwIpfpmMcpSeqNoLow.

hwIpfpmMcpOneDelayStatEntry row .1.3.6.1.4.1.2011.5.25.316.1.2.5.1

One-way delay measure statistics of an interval for a
particular test instance.The indexes of this entry are hwIpfpmMcpInstId and hwIpfpmMcpAchId and hwIpfpmMcpSeqNoHigh and hwIpfpmMcpSeqNoLow.

Indexes

hwIpfpmMcpInstId hwIpfpmMcpAchId hwIpfpmMcpSeqNoHigh hwIpfpmMcpSeqNoLow

Column	Syntax	OID
hwIpfpmMcpOneDelayErrInfo The error code to indicate the validity and the invalidation reason of an interval's one-way delay measure statistics.	HWIpfpmStatErrInfo Type Values: 0 noErr 1 initialIntervalForward 2 initialIntervalBackward 3 initialIntervalBidirection 4 inconsistInterval 5 asynClock 6 incompleteDataForward 7 incompleteDataBackward 8 incompleteDataBidirection 9 noFlowDataForward 10 noFlowDataBackward 11 noFlowDataBidirection 12 errFlowDataForward 13 errFlowDataBackward 14 errFlowDataBidirection 15 multiDataOneDelay 16 multiDataTwoDelay 17 errDelayVariationForward 18 errDelayVariationBackward 19 errDelayVariationBidirection 20 errMultiSourceSwitch 21 unknownErr	.1.3.6.1.4.1.2011.5.25.316.1.2.5.1.1
hwIpfpmMcpForwardOneDelay The one-way delay(microsecond) of forward flow.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.1.2.5.1.2
hwIpfpmMcpForwardOneDelayVariation The one-way delay variation(microsecond) of forward flow.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.1.2.5.1.3
hwIpfpmMcpBackwardOneDelay The one-way delay(microsecond) of backward flow.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.1.2.5.1.4
hwIpfpmMcpBackwardOneDelayVariation The one-way delay variation(microsecond) of backward flow.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.1.2.5.1.5
hwIpfpmMcpForwardOneDelayMMSType This value indicate multicastsrc type is 'master(0)' or 'slave(1)'.	HWIpfpmMMSType Type Values: 0 master 1 slave	.1.3.6.1.4.1.2011.5.25.316.1.2.5.1.6

Two-way delay measure statistics of an interval for a 
particular test instance.The indexes of this table are hwIpfpmMcpInstId and hwIpfpmMcpAchId and hwIpfpmMcpSeqNoHigh and hwIpfpmMcpSeqNoLow.

hwIpfpmMcpTwoDelayStatEntry row .1.3.6.1.4.1.2011.5.25.316.1.2.6.1

Two-way delay measure statistics of an interval for a
particular test instance.The indexes of this entry are hwIpfpmMcpInstId and hwIpfpmMcpAchId and hwIpfpmMcpSeqNoHigh and hwIpfpmMcpSeqNoLow.

Indexes

hwIpfpmMcpInstId hwIpfpmMcpAchId hwIpfpmMcpSeqNoHigh hwIpfpmMcpSeqNoLow

Column	Syntax	OID
hwIpfpmMcpTwoDelayErrInfo The error code to indicate the validity and the invalidation reason of an interval's two-way delay measure statistics.	HWIpfpmStatErrInfo Type Values: 0 noErr 1 initialIntervalForward 2 initialIntervalBackward 3 initialIntervalBidirection 4 inconsistInterval 5 asynClock 6 incompleteDataForward 7 incompleteDataBackward 8 incompleteDataBidirection 9 noFlowDataForward 10 noFlowDataBackward 11 noFlowDataBidirection 12 errFlowDataForward 13 errFlowDataBackward 14 errFlowDataBidirection 15 multiDataOneDelay 16 multiDataTwoDelay 17 errDelayVariationForward 18 errDelayVariationBackward 19 errDelayVariationBidirection 20 errMultiSourceSwitch 21 unknownErr	.1.3.6.1.4.1.2011.5.25.316.1.2.6.1.1
hwIpfpmMcpTwoDelay The two-way delay(microsecond) of monitored flow.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.1.2.6.1.2
hwIpfpmMcpTwoDelayVariation The two-way delay variation(microsecond) of monitored flow.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.1.2.6.1.3
hwIpfpmMcpForwardDelay The forward flow delay(microsecond) in two-way delay measurement.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.1.2.6.1.4
hwIpfpmMcpForwardDelayVariation The forward flow variation(microsecond) in two-way delay measurement.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.1.2.6.1.5
hwIpfpmMcpBackwardDelay The backward flow delay(microsecond) in two-way delay measurement.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.1.2.6.1.6
hwIpfpmMcpBackwardDelayVariation The backward flow variation(microsecond) in two-way delay measurement.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.1.2.6.1.7

Multi-in-point one-way delay measure statistics of an interval for a
particular test instance.The indexes of this table are hwIpfpmMcpInstId and 
		hwIpfpmMcpAchId and hwIpfpmMcpSeqNoHigh and hwIpfpmMcpSeqNoLow and hwIpfpmMcpOneDelayFlowType and hwIpfpmMcpOneDelayMultiSrcDCP and 
		hwIpfpmMcpOneDelayMultiSrcTLP and hwIpfpmMcpOneDelayMultiDesDCP and hwIpfpmMcpOneDelayMultiDesTLP

hwIpfpmMcpOneDelayMultiStatEntry row .1.3.6.1.4.1.2011.5.25.316.1.2.7.1

Multi-in-point one-way delay measure statistics of an interval for a
particular test instance.The indexes of this entry are hwIpfpmMcpInstId and
hwIpfpmMcpAchId and hwIpfpmMcpSeqNoHigh and hwIpfpmMcpSeqNoLow and hwIp…

Indexes

hwIpfpmMcpInstId hwIpfpmMcpAchId hwIpfpmMcpSeqNoHigh hwIpfpmMcpSeqNoLow hwIpfpmMcpOneDelayFlowType hwIpfpmMcpOneDelayMultiSrcDCP hwIpfpmMcpOneDelayMultiSrcTLP hwIpfpmMcpOneDelayMultiDesDCP hwIpfpmMcpOneDelayMultiDesTLP

Column	Syntax	OID
hwIpfpmMcpOneDelayFlowType The flow type for multi-in-point one-delay.	HWIpfpmMcpFlowType Type Values: 0 none 1 forward 2 backward 3 bidirectional	.1.3.6.1.4.1.2011.5.25.316.1.2.7.1.1
hwIpfpmMcpOneDelayMultiSrcDCP The multi-in-point one-way delay source DCP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.316.1.2.7.1.2
hwIpfpmMcpOneDelayMultiSrcTLP The multi-in-point one-way delay source TLP.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.1.2.7.1.3
hwIpfpmMcpOneDelayMultiDesDCP The multi-in-point one-way delay destination DCP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.316.1.2.7.1.4
hwIpfpmMcpOneDelayMultiDesTLP The multi-in-point one-way delay destination TLP.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.1.2.7.1.5
hwIpfpmMcpOneDelayMultiErrInfo The error code to indicate the validity and the invalidation reason of an interval's multi-in-point one-way delay measure statistics.	HWIpfpmStatErrInfo Type Values: 0 noErr 1 initialIntervalForward 2 initialIntervalBackward 3 initialIntervalBidirection 4 inconsistInterval 5 asynClock 6 incompleteDataForward 7 incompleteDataBackward 8 incompleteDataBidirection 9 noFlowDataForward 10 noFlowDataBackward 11 noFlowDataBidirection 12 errFlowDataForward 13 errFlowDataBackward 14 errFlowDataBidirection 15 multiDataOneDelay 16 multiDataTwoDelay 17 errDelayVariationForward 18 errDelayVariationBackward 19 errDelayVariationBidirection 20 errMultiSourceSwitch 21 unknownErr	.1.3.6.1.4.1.2011.5.25.316.1.2.7.1.6
hwIpfpmMcpOneDelayMulti The multi-in-point one-way delay(microsecond).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.1.2.7.1.7
hwIpfpmMcpOneDelayMultiVariation The multi-in-point one-way delay variation(microsecond).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.1.2.7.1.8

Multi-in-point two-way delay measure statistics of an interval for a
particular test instance.The indexes of this table are 
		hwIpfpmMcpInstId and hwIpfpmMcpAchId and hwIpfpmMcpSeqNoHigh and hwIpfpmMcpSeqNoLow and hwIpfpmMcpForwardDelayMultiSrcDCP and 
		hwIpfpmMcpForwardDelayMultiSrcTLP and hwIpfpmMcpForwardDelayMultiDesDCP and hwIpfpmMcpForwardDelayMultiDesTLP and 
		hwIpfpmMcpBackwardDelayMultiSrcDCP and hwIpfpmMcpBackwardDelayMultiSrcTLP and hwIpfpmMcpBackwardDelayMultiDesDCP and hwIpfpmMcpBackwardDelayMultiDesTLP.

hwIpfpmMcpTwoDelayMultiStatEntry row .1.3.6.1.4.1.2011.5.25.316.1.2.8.1

Multi-in-point two-way delay measure statistics of an interval for a
particular test instance.The indexes of this entry are
hwIpfpmMcpInstId and hwIpfpmMcpAchId and hwIpfpmMcpSeqNoHigh and hwIpfpmMcpSeqNoLow and hwIp…

Indexes

hwIpfpmMcpInstId hwIpfpmMcpAchId hwIpfpmMcpSeqNoHigh hwIpfpmMcpSeqNoLow hwIpfpmMcpForwardDelayMultiSrcDCP hwIpfpmMcpForwardDelayMultiSrcTLP hwIpfpmMcpForwardDelayMultiDesDCP hwIpfpmMcpForwardDelayMultiDesTLP hwIpfpmMcpBackwardDelayMultiSrcDCP hwIpfpmMcpBackwardDelayMultiSrcTLP hwIpfpmMcpBackwardDelayMultiDesDCP hwIpfpmMcpBackwardDelayMultiDesTLP

Column	Syntax	OID
hwIpfpmMcpForwardDelayMultiSrcDCP The multi-in-point two-way delay source DCP of forward flow.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.316.1.2.8.1.1
hwIpfpmMcpForwardDelayMultiSrcTLP The multi-in-point two-way delay source TLP of forward flow.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.1.2.8.1.2
hwIpfpmMcpForwardDelayMultiDesDCP The multi-in-point two-way delay destination DCP of forward flow.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.316.1.2.8.1.3
hwIpfpmMcpForwardDelayMultiDesTLP The multi-in-point two-way delay destination TLP of forward flow.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.1.2.8.1.4
hwIpfpmMcpBackwardDelayMultiSrcDCP The multi-in-point two-way delay source DCP of backward flow.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.316.1.2.8.1.5
hwIpfpmMcpBackwardDelayMultiSrcTLP The multi-in-point two-way delay source TLP of backward flow.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.1.2.8.1.6
hwIpfpmMcpBackwardDelayMultiDesDCP The multi-in-point two-way delay destination DCP of backward flow.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.316.1.2.8.1.7
hwIpfpmMcpBackwardDelayMultiDesTLP The multi-in-point two-way delay destination TLP of backward flow.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.1.2.8.1.8
hwIpfpmMcpTwoDelayMultiErrInfo The error code to indicate the validity and the invalidation reason of an interval's multi-in-point two-way delay measure statistics.	HWIpfpmStatErrInfo Type Values: 0 noErr 1 initialIntervalForward 2 initialIntervalBackward 3 initialIntervalBidirection 4 inconsistInterval 5 asynClock 6 incompleteDataForward 7 incompleteDataBackward 8 incompleteDataBidirection 9 noFlowDataForward 10 noFlowDataBackward 11 noFlowDataBidirection 12 errFlowDataForward 13 errFlowDataBackward 14 errFlowDataBidirection 15 multiDataOneDelay 16 multiDataTwoDelay 17 errDelayVariationForward 18 errDelayVariationBackward 19 errDelayVariationBidirection 20 errMultiSourceSwitch 21 unknownErr	.1.3.6.1.4.1.2011.5.25.316.1.2.8.1.9
hwIpfpmMcpTwoDelayMulti The multi-in-point two-way delay(microsecond) of monitored flow.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.1.2.8.1.10
hwIpfpmMcpTwoDelayMultiVariation The multi-in-point two-way delay variation(microsecond) of monitored flow.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.1.2.8.1.11
hwIpfpmMcpForwardDelayMulti The forward flow delay(microsecond) in multi-in-point two-way delay measurement.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.1.2.8.1.12
hwIpfpmMcpForwardDelayMultiVariation The forward flow variation(microsecond) in multi-in-point two-way delay measurement.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.1.2.8.1.13
hwIpfpmMcpBackwardDelayMulti The backward flow delay(microsecond) in multi-in-point two-way delay measurement.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.1.2.8.1.14
hwIpfpmMcpBackwardDelayMultiVariation The backward flow variation(microsecond) in multi-in-point two-way delay measurement.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.1.2.8.1.15

IPFPM authentication information for DCP.The index of this table is hwIpfpmDcpAuthKeyId.

hwIpfpmDcpAuthEntry row .1.3.6.1.4.1.2011.5.25.316.2.1.7.1

IPFPM authentication information for DCP.The index of this entry is hwIpfpmDcpAuthKeyId.

Indexes

hwIpfpmDcpAuthKeyId

Column	Syntax	OID
hwIpfpmDcpAuthKeyId Identification of the DCP authentication.	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.2011.5.25.316.2.1.7.1.1
hwIpfpmDcpAuthType Authentication type of the DCP. The enumeration 'hmac-sha256(1)' represents the password is sent after being encrypted through hmac-sha256. By default, authentication is not configured.	HWIpfpmAuthTyper/w Type Values: 1 hmac-sha256	.1.3.6.1.4.1.2011.5.25.316.2.1.7.1.2
hwIpfpmDcpAuthKey The password used as an IPFPM authentication key.	OctetStringr/w Constraints: range: 0-432	.1.3.6.1.4.1.2011.5.25.316.2.1.7.1.3
hwIpfpmDcpAuthRowStatus Used for controlling the creation and deletion of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.316.2.1.7.1.4

IPFPM configuration information for a particular DCP test 
instance.The index of this table is hwIpfpmDcpInstId.

hwIpfpmDcpInstEntry row .1.3.6.1.4.1.2011.5.25.316.2.1.8.1

IPFPM configuration information for a particular DCP test
instance.The index of this entry is hwIpfpmDcpInstId.

Indexes

hwIpfpmDcpInstId

Column	Syntax	OID
hwIpfpmDcpInstId Identification of the test instance.	Integer32 Constraints: range: 16711681-16777214 range: 1-8355838	.1.3.6.1.4.1.2011.5.25.316.2.1.8.1.1
hwIpfpmDcpInstDesc Description of the test instance. if the string length is 0, it represents that it is not configured.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2011.5.25.316.2.1.8.1.2
hwIpfpmDcpInstMcpId Identification of the MCP that DCP reports measure data of this test instance to. The value 0.0.0.0 represents that it is not configured	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.316.2.1.8.1.3
hwIpfpmDcpInstMcpPort The listening port of the MCP that DCP reports measure data of this test instance to. It need setting 'hwIpfpmDcpInstMcpId' first before setting this object.	Integer32r/w Constraints: range: 1024-65535	.1.3.6.1.4.1.2011.5.25.316.2.1.8.1.4
hwIpfpmDcpInstInterval This object indicates that interval of an test instance is 'interval1s(1)' or 'interval10s(10)' or 'interval60s(60)' or 'interval600s(600)'.	HWIpfpmInstIntervalTyper/w Type Values: 1 interval1s 10 interval10s 60 interval60s 600 interval600s	.1.3.6.1.4.1.2011.5.25.316.2.1.8.1.5
hwIpfpmDcpInstRowStatus Used for controlling the creation and deletion of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.316.2.1.8.1.6
hwIpfpmDcpInstType type of the test instance.	HWIpfpmInstTyper/w Type Values: 0 unicast 1 multicastsrc 2 multicastrecv	.1.3.6.1.4.1.2011.5.25.316.2.1.8.1.7
hwIpfpmDcpSourceInstId Identification of the source instance.	Integer32r/w Constraints: range: 16711681-16777214 range: 0-0	.1.3.6.1.4.1.2011.5.25.316.2.1.8.1.8
hwIpfpmDcpInstMcpVpnName The name of the VPN instance through which the DCP and the MCP communicates. 'hwIpfpmDcpInstMcpId' should be setted first before setting this object.	OctetStringr/w Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.25.316.2.1.8.1.9
hwIpfpmDcpInstMcpVpnType The type of the VPN instance. 'hwIpfpmDcpInstMcpId' should be setted first before setting this object.	HWIpfpmVpnTyper/w Type Values: 0 none 1 manage-vpn 2 vpn-instance	.1.3.6.1.4.1.2011.5.25.316.2.1.8.1.10
hwIpfpmDcpInstGroupId The group identification of the test instance.	Integer32r/w Constraints: range: 0-8355838	.1.3.6.1.4.1.2011.5.25.316.2.1.8.1.11

IPFPM authentication information for a particular DCP test 
instance.The indexes of this table are hwIpfpmDcpInstId and hwIpfpmDcpInstAuthKeyId.

hwIpfpmDcpInstAuthEntry row .1.3.6.1.4.1.2011.5.25.316.2.1.9.1

IPFPM authentication information for a particular DCP test
instance.The indexes of this entry are hwIpfpmDcpInstId and hwIpfpmDcpInstAuthKeyId.

Indexes

hwIpfpmDcpInstId hwIpfpmDcpInstAuthKeyId

Column	Syntax	OID
hwIpfpmDcpInstAuthKeyId Identification of the DCP authentication.	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.2011.5.25.316.2.1.9.1.1
hwIpfpmDcpInstAuthType Authentication type of DCP instance authentication. The enumeration 'hmac-sha256(1)' represents the password is sent after being encrypted through hmac-sha256. By default, authentication is not configured. If this …	HWIpfpmAuthTyper/w Type Values: 1 hmac-sha256	.1.3.6.1.4.1.2011.5.25.316.2.1.9.1.2
hwIpfpmDcpInstAuthKey The password used as an DCP test instance authentication key.	OctetStringr/w Constraints: range: 0-432	.1.3.6.1.4.1.2011.5.25.316.2.1.9.1.3
hwIpfpmDcpInstAuthRowStatus Used for controlling the creation and deletion of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.316.2.1.9.1.4

IPFPM configuration information for a particular DCP test 
instance flow.The indexes of this table are hwIpfpmDcpInstId and hwIpfpmDcpFlowType.

hwIpfpmDcpFlowEntry row .1.3.6.1.4.1.2011.5.25.316.2.1.10.1

IPFPM configuration information for a particular DCP test
instance flow.The indexes of this entry are hwIpfpmDcpInstId and hwIpfpmDcpFlowType.

Indexes

hwIpfpmDcpInstId hwIpfpmDcpFlowType

Column	Syntax	OID
hwIpfpmDcpFlowType This object indicates that the flow is 'forward(1)' or 'backward(2)' or 'bidirectional(3)'.	HWIpfpmFlowType Type Values: 0 null 1 forward 2 backward 3 bidirectional 4 forwardandbackward	.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.1
hwIpfpmDcpFlowProtocol This object indicates the protocol specified as the flow feature. 'hwIpfpmDcpFlowSrcPortBgn', 'hwIpfpmDcpFlowSrcPortEnd', 'hwIpfpmDcpFlowDstPortBgn', and 'hwIpfpmDcpFlowDstPortEnd' can be configured only when the valu…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.2
hwIpfpmDcpFlowDscp This object indicates the DSCP specified as the flow feature. The value -1 represents that this object is not configured.	Integer32r/w Constraints: range: -1-63	.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.3
hwIpfpmDcpFlowSrcAddr This object indicates the source ip address specified as the flow feature. The value 0.0.0.0 represents that this object is not configured.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.4
hwIpfpmDcpFlowSrcMaskLen This object indicates the source ip mask length specified as the flow feature.	Integer32r/w Constraints: range: 1-32	.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.5
hwIpfpmDcpFlowDstAddr This object indicates the destination ip address specified as the flow feature. The value 0.0.0.0 represents that this object is not configured.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.6
hwIpfpmDcpFlowDstMaskLen This object indicates the destination ip mask length specified as the flow feature.	Integer32r/w Constraints: range: 1-32	.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.7
hwIpfpmDcpFlowSrcPortBgn This object indicates the begin value of source port specified as the flow feature. It need configure 'hwIpfpmDcpFlowProtocol' first before configure this object. The value 0 represents that this object is not configu…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.8
hwIpfpmDcpFlowSrcPortEnd This object indicates the end value of source port specified as the flow feature. It need configure 'hwIpfpmDcpFlowProtocol' first before configure this object. The value 0 represents that this object is not configur…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.9
hwIpfpmDcpFlowDstPortBgn This object indicates the begin value of destination port specified as the flow feature. It need configure 'hwIpfpmDcpFlowProtocol' first before configure this object. The value 0 represents that this object is not con…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.10
hwIpfpmDcpFlowDstPortEnd This object indicates the end value of destination port specified as the flow feature. It need configure 'hwIpfpmDcpFlowProtocol' first before configure this object. The value 0 represents that this object is not confi…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.11
hwIpfpmDcpFlowRowStatus Used for controlling the creation and deletion of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.12
hwIpfpmDcpFlowOuterSrcAddr This object indicates the outer source ip address specified as the flow feature. The value 0 represents that this object is not configured.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.13
hwIpfpmDcpFlowOuterDstAddr This object indicates the outer destination ip address specified as the flow feature. The value 0 represents that this object is not configured.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.14
hwIpfpmDcpFlowForwardGtpTeid This object indicates the value of forward gtp teid specified as the flow feature. The value 0 represents that this object is not configured.	Unsigned32r/w Constraints: range: 0-4294967294	.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.15
hwIpfpmDcpFlowBackwardGtpTeid This object indicates the value of backward gtp teid specified as the flow feature. The value 0 represents that this object is not configured.	Unsigned32r/w Constraints: range: 0-4294967294	.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.16
hwIpfpmDcpFlowVxlan The Vxlan of the flow feature. The value false(2) represents that this object is not configured.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.17
hwIpfpmDcpFlowVni This object indicates the value of vni specified as the flow feature. The value 0 represents that this object is not configured.	Integer32r/w Constraints: range: 0-16000000	.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.18

IPFPM configuration information for a particular TLP.
The indexes of this table are hwIpfpmDcpInstId and hwIpfpmDcpTlpId.

hwIpfpmDcpInstTlpEntry row .1.3.6.1.4.1.2011.5.25.316.2.1.11.1

IPFPM configuration information for a particular TLP.
The indexes of this entry are hwIpfpmDcpInstId and hwIpfpmDcpTlpId.

Indexes

hwIpfpmDcpInstId hwIpfpmDcpTlpId

Column	Syntax	OID
hwIpfpmDcpInstTlpRole The object indicates the TLP position 'in-point(1)' or 'out-point(2) or 'mid-point(3)'.	HWIpfpmTlpRoler/w Type Values: 1 in-point 2 out-point 3 mid-point	.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.1
hwIpfpmDcpInstTlpFlowType The object indicates the flow type of the instance TLP is 'forward(1)' or 'backward(2)' or 'bidirectional(3)' or 'forwardandbackward(4)'. Only 'forward(1)' and 'backward(2)' can be configured when 'hwIpfpmDcpInstTlpRo…	HWIpfpmFlowTyper/w Type Values: 0 null 1 forward 2 backward 3 bidirectional 4 forwardandbackward	.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.2
hwIpfpmDcpInstTlpDirec The object indicates the TLP is 'ingress(1)' or 'egress(2)' of the flow of DCP test instance.	HWIpfpmFlowTlpDirecr/w Type Values: 1 ingress 2 egress	.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.3
hwIpfpmDcpInstTlpVpnLabel The VPN label of of the flow that the TLP measured. The value -1 represents that this object is not configured.	Integer32r/w Constraints: range: -1-1048575	.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.4
hwIpfpmDcpInstTlpCtrlWordFlag The control word flag of the flow that the TLP measured. The value false(2) represents that this object is not configured.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.5
hwIpfpmDcpInstTlpLspLabel The LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured.	Integer32r/w Constraints: range: -1-1048575	.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.6
hwIpfpmDcpInstTlpL2VpnFlag The L2VPN flag of the flow that the TLP measured. The value false(2) represents that this object is not configured.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.7
hwIpfpmDcpInstTlpTpId The tpid for vlan. The value range is from '600' to 'FFFF'.	OctetStringr/w Constraints: range: 3-4	.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.8
hwIpfpmDcpInstTlpRowStatus Used for controlling the creation and deletion of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.9
hwIpfpmDcpInstTlpMultiSrcType The object indicates the type of multicastsrc 'master(0)'or 'slave(1)'.	HWIpfpmMMSTyper/w Type Values: 0 master 1 slave	.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.10
hwIpfpmDcpInstTlpFlowLabelFlag This value indicate whether the flow-label is configured.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.11
hwIpfpmDcpInstTlpLspLabel2 The LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured. The value -2 represents that this object matches any label.	Integer32r/w Constraints: range: -2-1048575	.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.12
hwIpfpmDcpInstTlpLspLabel3 The LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured.	Integer32r/w Constraints: range: -1-1048575	.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.13
hwIpfpmDcpInstTlpOuterVlan The outer-vlan id of the flow that the TLP measured. The value 0 represents that this object is not configured.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.14
hwIpfpmDcpInstTlpInnerVlan The inner-vlan id of the flow that the TLP measured. The value 0 represents that this object is not configured.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.15
hwIpfpmDcpInstTlpBackwardVpnLabel The VPN label of of the flow that the TLP measured. The value -1 represents that this object is not configured.	Integer32r/w Constraints: range: -1-1048575	.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.16
hwIpfpmDcpInstTlpBackwardCtrlWordFlag The control word flag of the flow that the TLP measured. The value false(2) represents that this object is not configured.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.17
hwIpfpmDcpInstTlpBackwardLspLabel The LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured.	Integer32r/w Constraints: range: -1-1048575	.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.18
hwIpfpmDcpInstTlpBackwardLspLabel2 The LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured. The value -2 represents that this object matches any label.	Integer32r/w Constraints: range: -2-1048575	.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.19
hwIpfpmDcpInstTlpBackwardLspLabel3 The LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured.	Integer32r/w Constraints: range: -1-1048575	.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.20
hwIpfpmDcpInstTlpBackwardL2VpnFlag The L2VPN flag of the flow that the TLP measured. The value false(2) represents that this object is not configured.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.21
hwIpfpmDcpInstTlpBackwardFlowLabelFlag This object indicates whether the flow label function is configured for the backward target flow. If the value is false(2), the flow label function is not configured.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.22
hwIpfpmDcpInstTlpBackwardOuterVlan The outer-vlan id of the flow that the TLP measured. The value 0 represents that this object is not configured.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.23
hwIpfpmDcpInstTlpBackwardInnerVlan The inner-vlan id of the flow that the TLP measured. The value 0 represents that this object is not configured.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.24
hwIpfpmDcpInstTlpBackwardTpId The tpid for vlan. The value range is from '600' to 'FFFF'.	OctetStringr/w Constraints: range: 3-4	.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.25

IPFPM loss measure configuration information for a particular  
DCP test instance.The indexes of this table are hwIpfpmDcpInstId and hwIpfpmDcpLossTlpRole.

hwIpfpmDcpLossMeasEntry row .1.3.6.1.4.1.2011.5.25.316.2.1.12.1

IPFPM loss measure configuration information for a particular
DCP test instance.The indexes of this entry are hwIpfpmDcpInstId and hwIpfpmDcpLossTlpRole.

Indexes

hwIpfpmDcpInstId hwIpfpmDcpLossTlpRole

Column	Syntax	OID
hwIpfpmDcpLossEnable This object indicates that the on-demand loss measure function is 'enabled(1)' or 'disabled(2)'.	HWEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.316.2.1.12.1.1
hwIpfpmDcpLossContEnable This object indicates that the continual loss measure function is 'enabled(1)' or 'disabled(2)'.	HWEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.316.2.1.12.1.2
hwIpfpmDcpLossTimeRange The time range in which the on-demand loss measure function is enabled. The enumeration values include 'timerange5m(5)', 'timerange10m(10)', 'timerange15m(15)', and 'timerange30m(30)'. The value 'null(0)' represents t…	HWIpfpmMeasTimeRangeTyper/w Type Values: 0 null 5 timerange5m 10 timerange10m 15 timerange15m 30 timerange30m	.1.3.6.1.4.1.2011.5.25.316.2.1.12.1.3
hwIpfpmDcpLossTlpRole The type of TLP that loss measure enabled on. The enumeration values include 'e2e(1)','section(2)' . The value 'e2e(1)' represents that this object is end-end. The value 'section(2)' represents that this object is m…	HWIpfpmLossTlpRole Type Values: 1 e2e 2 section	.1.3.6.1.4.1.2011.5.25.316.2.1.12.1.4

IPFPM delay measure configuration information for a particular  
DCP test instance.The indexes of this table are hwIpfpmDcpInstId and hwIpfpmDcpDelayTlpRole.

hwIpfpmDcpDelayMeasEntry row .1.3.6.1.4.1.2011.5.25.316.2.1.13.1

IPFPM delay measure configuration information for a particular
DCP test instance.The indexes of this entry are hwIpfpmDcpInstId and hwIpfpmDcpDelayTlpRole.

Indexes

hwIpfpmDcpInstId hwIpfpmDcpDelayTlpRole

Column	Syntax	OID
hwIpfpmDcpDelayEnable This object indicates that the on-demand delay measure function is 'enabled(1)' or 'disabled(2)'.	HWEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.316.2.1.13.1.1
hwIpfpmDcpDelayContEnable This object indicates that the continual delay measure function is 'enabled(1)' or 'disabled(2)'.	HWEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.316.2.1.13.1.2
hwIpfpmDcpDelayMeasType The type of delay measure. The enumeration values include 'oneway(1)' and 'twoway(2)'. The value 'null(0)' represents that this object is not configured.	HWIpfpmDelayMeasTyper/w Type Values: 0 null 1 oneway 2 twoway	.1.3.6.1.4.1.2011.5.25.316.2.1.13.1.3
hwIpfpmDcpDelayTimeRange The time range in which the on-demand delay measure function is enabled. The enumeration values include 'timerange5m(5)', 'timerange10m(10)', 'timerange15m(15)', and 'timerange30m(30)'. The value 'null(0)' represents …	HWIpfpmMeasTimeRangeTyper/w Type Values: 0 null 5 timerange5m 10 timerange10m 15 timerange15m 30 timerange30m	.1.3.6.1.4.1.2011.5.25.316.2.1.13.1.4
hwIpfpmDcpDelayTlpRole The type of TLP that delay measure enabled on. The enumeration values include 'e2e(1)','section(2)' . The value 'e2e(1)' represents that this object is end-end. The value 'section(2)' represents that this object is…	HWIpfpmDelayTlpRole Type Values: 1 e2e 2 section	.1.3.6.1.4.1.2011.5.25.316.2.1.13.1.5
hwIpfpmDcpDelayForwardTlpId The ingress TLP of the flow for one-way delay measure or the ingress TLP of the forward flow for two-way delay measure. The value 0 represents that this object is not configured.	Integer32r/w Constraints: range: 0-16777215	.1.3.6.1.4.1.2011.5.25.316.2.1.13.1.6
hwIpfpmDcpDelayBackwardTlpId The ingress TLP of the backward flow for two-way delay measure. The value 0 represents that this object is not configured.	Integer32r/w Constraints: range: 0-16777215	.1.3.6.1.4.1.2011.5.25.316.2.1.13.1.7

IPFPM configuration information for a particular TLP on interface.
The index of this table is hwIpfpmDcpTlpId.

hwIpfpmDcpTlpEntry row .1.3.6.1.4.1.2011.5.25.316.2.1.14.1

IPFPM configuration information for a particular TLP on interface.
The index of this entry is hwIpfpmDcpTlpId.

Indexes

hwIpfpmDcpTlpId

Column	Syntax	OID
hwIpfpmDcpTlpId Identification of TLP.	Integer32 Constraints: range: 1-16777215	.1.3.6.1.4.1.2011.5.25.316.2.1.14.1.1
hwIpfpmDcpTlpIfIndex The index of the port that the TLP configured on.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.316.2.1.14.1.2
hwIpfpmDcpTlpRowStatus Used for controlling the creation and deletion of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.316.2.1.14.1.3
hwIpfpmDcpTlpVlanId The VLAN ID of the TLP measured. The value 0 represents ce-default-vlan. The value 65535 represents that this object is not configured.	Integer32r/w Constraints: range: 0-4094 range: 65535-65535	.1.3.6.1.4.1.2011.5.25.316.2.1.14.1.4

The TLP information which is configured with the interface.
The indexes of this table are hwIpfpmDcpTlpQueryIfIndex and hwIpfpmDcpTlpQueryVlanId.

hwIpfpmDcpTlpQueryEntry row .1.3.6.1.4.1.2011.5.25.316.2.1.15.1

The TLP information which is configured with the interface.
The indexes of this entry are hwIpfpmDcpTlpQueryIfIndex and hwIpfpmDcpTlpQueryVlanId.

Indexes

hwIpfpmDcpTlpQueryIfIndex hwIpfpmDcpTlpQueryVlanId

Column	Syntax	OID
hwIpfpmDcpTlpQueryIfIndex The interface index which is configured with TLP.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.316.2.1.15.1.1
hwIpfpmDcpTlpQueryTlpId The TLP ID which is configured on the interface.	Integer32 Constraints: range: 1-16777215	.1.3.6.1.4.1.2011.5.25.316.2.1.15.1.2
hwIpfpmDcpTlpQueryVlanId The VLAN ID of the TLP measured. The value 0 represents ce-default-vlan. The value 65535 represents that this object is not configured.	Integer32 Constraints: range: 65535-65535 range: 0-4094	.1.3.6.1.4.1.2011.5.25.316.2.1.15.1.3

The information is that the multicast source instance referred by some multicast receiver instances.
The index of this table is hwIpfpmDcpInstId.

hwIpfpmDcpSrcInstReferQueryEntry row .1.3.6.1.4.1.2011.5.25.316.2.1.16.1

The information is that the multicast source instance referred by some multicast receiver instances.
The index of this entry is hwIpfpmDcpInstId.

Indexes

hwIpfpmDcpInstId

Column	Syntax	OID
hwIpfpmDcpSrcInstReferCnt The object indicates the counter that the multicast source instance referred by some multicast receiver instances.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.2.1.16.1.1

The TLP information which is configured with the interface.
The indexes of this table are hwIpfpmDcpTlpQueryExtIfIndex and 
hwIpfpmDcpTlpQueryExtVlanId and hwIpfpmDcpTlpQueryExtOntId and hwIpfpmDcpTlpQueryExtOntPortType and hwIpfpmDcpTlpQueryExtOntPortId.

hwIpfpmDcpTlpQueryExtEntry row .1.3.6.1.4.1.2011.5.25.316.2.1.17.1

The TLP information which is configured with the interface.
The indexes of this entry are hwIpfpmDcpTlpQueryExtIfIndex and
hwIpfpmDcpTlpQueryExtVlanId and hwIpfpmDcpTlpQueryExtOntId and hwIpfpmDcpTlpQueryExtOntPortType…

Indexes

hwIpfpmDcpTlpQueryExtIfIndex hwIpfpmDcpTlpQueryExtVlanId hwIpfpmDcpTlpQueryExtOntId hwIpfpmDcpTlpQueryExtOntPortType hwIpfpmDcpTlpQueryExtOntPortId

Column	Syntax	OID
hwIpfpmDcpTlpQueryExtIfIndex The interface index which is configured with TLP.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.316.2.1.17.1.1
hwIpfpmDcpTlpQueryExtTlpId The TLP ID which is configured on the interface.	Integer32 Constraints: range: 1-16777215	.1.3.6.1.4.1.2011.5.25.316.2.1.17.1.2
hwIpfpmDcpTlpQueryExtVlanId The VLAN ID of the TLP measured. The value 0 represents ce-default-vlan. The value 65535 represents that this object is not configured.	Integer32 Constraints: range: 65535-65535 range: 0-4094	.1.3.6.1.4.1.2011.5.25.316.2.1.17.1.3
hwIpfpmDcpTlpQueryExtOntId This object indicates the ONT ID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.2.1.17.1.4
hwIpfpmDcpTlpQueryExtOntPortType This object indicates the ONT port's type. Options: 1. eth (47) -indicates ONT port's type is the eth type. 2. invalid(-1) -indicates ONT port's type is not matched.	Enumeration Enumerated Values: -1 invalid 47 eth	.1.3.6.1.4.1.2011.5.25.316.2.1.17.1.5
hwIpfpmDcpTlpQueryExtOntPortId This object indicates the ONT port ID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.2.1.17.1.6

IPFPM configuration information for a particular TLP on interface.
The index of this table is hwIpfpmDcpExtTlpId.

hwIpfpmDcpTlpExtEntry row .1.3.6.1.4.1.2011.5.25.316.2.1.18.1

IPFPM configuration information for a particular TLP on interface.
The index of this entry is hwIpfpmDcpExtTlpId.

Indexes

hwIpfpmDcpExtTlpId

Column	Syntax	OID
hwIpfpmDcpExtTlpId Identification of TLP.	Integer32 Constraints: range: 1-16777215	.1.3.6.1.4.1.2011.5.25.316.2.1.18.1.1
hwIpfpmDcpTlpExtIfIndex The index of the port that the TLP configured on.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.2.1.18.1.2
hwIpfpmDcpTlpExtRowStatus Used for controlling the creation and deletion of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.316.2.1.18.1.3
hwIpfpmDcpTlpExtVlanId The VLAN ID of the TLP measured. The value 0 represents ce-default-vlan. The value 65535 represents that this object is not configured.	Integer32r/w Constraints: range: 65535-65535 range: 0-4094	.1.3.6.1.4.1.2011.5.25.316.2.1.18.1.4
hwIpfpmDcpTlpExtOntId This object indicates the ONT ID. The value -1 represents that this object is not configured.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.2.1.18.1.5
hwIpfpmDcpTlpExtOntPortType This object indicates the ONT port's type. Options: 1. eth (47) -indicates ONT port's type is the eth type. 2. invalid(-1) -indicates ONT port's type is not matched. DEFVAL { -1 } .	Enumerationr/w Enumerated Values: -1 invalid 47 eth	.1.3.6.1.4.1.2011.5.25.316.2.1.18.1.6
hwIpfpmDcpTlpExtOntPortId This object indicates the ONT port ID. The value -1 represents that this object is not configured.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.316.2.1.18.1.7

IPFPM nexthop configuration information for a particular TLP.
The indexes of this table are hwIpfpmDcpInstId and hwIpfpmDcpTlpId and hwIpfpmDcpNexthopIp.

hwIpfpmDcpInstTlpNHEntry row .1.3.6.1.4.1.2011.5.25.316.2.1.19.1

IPFPM nexthop configuration information for a particular TLP.
The indexes of this entry are hwIpfpmDcpInstId and hwIpfpmDcpTlpId and hwIpfpmDcpNexthopIp.

Indexes

hwIpfpmDcpInstId hwIpfpmDcpTlpId hwIpfpmDcpNexthopIp

Column	Syntax	OID
hwIpfpmDcpNexthopIp The object indicates the nexthop information for a particular TLP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.5.25.316.2.1.19.1.1
hwIpfpmDcpInstTlpNHRowStatus Used for controlling the creation and deletion of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.316.2.1.19.1.2

IPFPM configuration information for a particular load balancing path TLP.
The indexes of this table are hwIpfpmDcpInstId and hwIpfpmDcpTlpId and hwIpfpmIndex.

hwIpfpmDcpInstTlpIndexEntry row .1.3.6.1.4.1.2011.5.25.316.2.1.20.1

IPFPM configuration information for a particular load balancing path TLP.
The indexes of this entry are hwIpfpmDcpInstId and hwIpfpmDcpTlpId and hwIpfpmIndex.

Indexes

hwIpfpmDcpInstId hwIpfpmDcpTlpId hwIpfpmIndex

Column	Syntax	OID
hwIpfpmIndex The indexid of a load balancing path. The value range is from '1' to '16'.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.2011.5.25.316.2.1.20.1.1
hwIpfpmDcpInstTlpRoleIndex The object indicates the TLP position 'mid-point(3)'.	HWIpfpmTlpRoleIndexr/w Type Values: 3 mid-point	.1.3.6.1.4.1.2011.5.25.316.2.1.20.1.2
hwIpfpmDcpInstTlpFlowTypeIndex The object indicates the flow type of the instance TLP is 'forward(1)' or 'backward(2)' or 'bidirectional(3)' or 'forwardandbackward(4)'. Only 'forward(1)' and 'backward(2)' can be configured when 'hwIpfpmDcpInstTlpRo…	HWIpfpmFlowTyper/w Type Values: 0 null 1 forward 2 backward 3 bidirectional 4 forwardandbackward	.1.3.6.1.4.1.2011.5.25.316.2.1.20.1.3
hwIpfpmDcpInstTlpDirecIndex The object indicates the TLP is 'ingress(1)' or 'egress(2)' of the flow of DCP test instance.	HWIpfpmFlowTlpDirecr/w Type Values: 1 ingress 2 egress	.1.3.6.1.4.1.2011.5.25.316.2.1.20.1.4
hwIpfpmDcpInstTlpVpnLabelIndex The VPN label of of the flow that the TLP measured. The value -1 represents that this object is not configured.	Integer32r/w Constraints: range: -1-1048575	.1.3.6.1.4.1.2011.5.25.316.2.1.20.1.5
hwIpfpmDcpInstTlpCtrlWordFlagIndex The control word flag of the flow that the TLP measured. The value false(2) represents that this object is not configured.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.316.2.1.20.1.6
hwIpfpmDcpInstTlpLspLabelIndex The LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured.	Integer32r/w Constraints: range: -1-1048575	.1.3.6.1.4.1.2011.5.25.316.2.1.20.1.7
hwIpfpmDcpInstTlpL2VpnFlagIndex The L2VPN flag of the flow that the TLP measured. The value false(2) represents that this object is not configured.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.316.2.1.20.1.8
hwIpfpmDcpInstTlpTpIdIndex The tpid for vlan. The value range is from '600' to 'FFFF'.	OctetStringr/w Constraints: range: 3-4	.1.3.6.1.4.1.2011.5.25.316.2.1.20.1.9
hwIpfpmDcpInstTlpRowStatusIndex Used for controlling the creation and deletion of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.316.2.1.20.1.10
hwIpfpmDcpInstTlpFlowLabelFlagIndex This value indicate whether the flow-label is configured.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.316.2.1.20.1.11
hwIpfpmDcpInstTlpLspLabel2Index The LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured. The value -2 represents that this object matches any label.	Integer32r/w Constraints: range: -1-1048575	.1.3.6.1.4.1.2011.5.25.316.2.1.20.1.12
hwIpfpmDcpInstTlpBackwardVpnLabelIndex The VPN label of of the flow that the TLP measured. The value -1 represents that this object is not configured.	Integer32r/w Constraints: range: -1-1048575	.1.3.6.1.4.1.2011.5.25.316.2.1.20.1.13
hwIpfpmDcpInstTlpBackwardCtrlWordFlagIndex The control word flag of the flow that the TLP measured. The value false(2) represents that this object is not configured.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.316.2.1.20.1.14
hwIpfpmDcpInstTlpBackwardLspLabelIndex The LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured.	Integer32r/w Constraints: range: -1-1048575	.1.3.6.1.4.1.2011.5.25.316.2.1.20.1.15
hwIpfpmDcpInstTlpBackwardLspLabel2Index The LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured. The value -2 represents that this object matches any label.	Integer32r/w Constraints: range: -1-1048575	.1.3.6.1.4.1.2011.5.25.316.2.1.20.1.16
hwIpfpmDcpInstTlpBackwardL2VpnFlagIndex The L2VPN flag of the flow that the TLP measured. The value false(2) represents that this object is not configured.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.316.2.1.20.1.17
hwIpfpmDcpInstTlpBackwardFlowLabelFlagIndex This value indicate whether the flow-label is configured.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.25.316.2.1.20.1.18
hwIpfpmDcpInstTlpBackwardTpIdIndex The tpid for vlan. The value range is from '600' to 'FFFF'.	OctetStringr/w Constraints: range: 3-4	.1.3.6.1.4.1.2011.5.25.316.2.1.20.1.19

IPFPM nexthop configuration information for a  a particular load balancing path TLP.
The indexes of this table are hwIpfpmDcpInstId and hwIpfpmDcpTlpId and hwIpfpmIndex and hwIpfpmDcpNexthopIp.

hwIpfpmDcpInstTlpNHIndexEntry row .1.3.6.1.4.1.2011.5.25.316.2.1.21.1

IPFPM nexthop configuration information for a a particular load balancing path TLP.
The indexes of this entry are hwIpfpmDcpInstId and hwIpfpmDcpTlpId and hwIpfpmIndex and hwIpfpmDcpNexthopIp.

Indexes

hwIpfpmDcpInstId hwIpfpmDcpTlpId hwIpfpmIndex hwIpfpmDcpNexthopIp

Column	Syntax	OID
hwIpfpmDcpInstTlpNHIndexRowStatus Used for controlling the creation and deletion of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.316.2.1.21.1.1