HUAWEI-IPDSLAM-SIMULATION-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
97

hwDhcpSimulateCfgTable

table
.1.3.6.1.4.1.2011.5.113.1.1 · 1 row entry · 13 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwDhcpSimulateCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPDSLAM-SIMULATION-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPDSLAM-SIMULATION-MIB::hwDhcpSimulateCfgTable' 
This table is mainly used to configure the DHCP simulation.
You can use the set operation to set a leave in the table to start a DHCP simulation instance and simulate an actual user.
You can use the get operation to query the existing DHCP simulation instances in the current system.
The indexes of this table are hwDhcpSimulateFlowId and hwDhcpSimulateMacAddress.
hwDhcpSimulateCfgEntry row .1.3.6.1.4.1.2011.5.113.1.1.1
This table is mainly used to configure the DHCP simulation.
You can use the set operation to set a leave in the table to start a DHCP simulation instance and simulate an actual user.
You can use the get operation to que…
Indexes
Column Syntax OID
hwDhcpSimulateFlowId
Indicates the flow ID of the user to be simulated. This leave is the index of hwDhcpSimulateCfgTable.
The value of this leave must be set when a DHCP simulation is started on the OLT.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.113.1.1.1.1
hwDhcpSimulateMacAddress
Indicates the MAC address of the user to be simulated. In the start of DHCP simulation, the recommended MAC address corresponding this leave is the MAC address of an actual user.
This leave is the index of hwDhcpSimulat…
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2011.5.113.1.1.1.2
hwDhcpSimulateUserVlanTagNumber
Indicates the number of tags carried by the user-side packet.
Options:
1. untag(0) -Indicates that the user packet is untagged.
2. singleTag(1) -Indicates that the user packet is single tag.
3. invalid…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.113.1.1.1.3
hwDhcpSimulateUserVlanid
Indicates the VLAN ID of the user-side packet. If hwDhcpSimulateUserVlanTagNumber is 0, this item does not need to be configured.
If the value of this leave is 0 and hwDhcpSimulateUserVlanTagNumber is 1, the current mod…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.113.1.1.1.4
hwDhcpSimulateOption60
Indicates the option 60 contents of the DHCP simulation instance. The length is 0-64 bytes. The system considers that this leave is not configured when the length is 0.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.5.113.1.1.1.5
hwDhcpSimulateOption61Type
Indicates the option 61 type of the DHCP simulation instance. The values are 0 and 1.

Options:
1. string(0) -Indicates that the option 61 contents are a string.
2. mac(1) -Indic…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.113.1.1.1.6
hwDhcpSimulateOption61ClientId
Indicates the option 61 contents of the DHCP simulation instance. The length is 0-64 bytes.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.5.113.1.1.1.7
hwDhcpSimulatePingHost1IPAddress
Indicates the first host IP address to be pinged in the DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to th…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.1.1.1.8
hwDhcpSimulatePingHost2IPAddress
Indicates the second host IP address to be pinged in the DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to t…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.1.1.1.9
hwDhcpSimulatePingHost3IPAddress
Indicates the third host IP address to be pinged in the DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to th…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.1.1.1.10
hwDhcpSimulatePingHost4IPAddress
Indicates the fourth host IP address to be pinged in the DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to t…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.1.1.1.11
hwDhcpSimulatePingHost5IPAddress
Indicates the fifth host IP address to be pinged in the DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to th…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.1.1.1.12
hwDhcpSimulateRowStatus
Indicates the operation type and is mainly used to start or stop the DHCP simulation. During query, if the corresponding simulation instance exists, the result is active.
Options:
1. active(1) -indicates the…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.113.1.1.1.13

hwDhcpSimulateResultTable

table
.1.3.6.1.4.1.2011.5.113.1.2 · 1 row entry · 31 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwDhcpSimulateResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPDSLAM-SIMULATION-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPDSLAM-SIMULATION-MIB::hwDhcpSimulateResultTable' 
Indicates the simulation result. During simulation, you can perform the get operation to query the simulation result of the simulation instance.
The indexes of this table are hwDhcpSimulateFlowId and hwDhcpSimulateMacAddress.
hwDhcpSimulateResultEntry row .1.3.6.1.4.1.2011.5.113.1.2.1
Indicates the simulation result. During simulation, you can perform the get operation to query the simulation result of the simulation instance.
The indexes of this entry are hwDhcpSimulateFlowId and hwDhcpSimulateMacAd…
Indexes
Column Syntax OID
hwDhcpSimulateStatus
Indicates the simulation status of the current simulation instance.
Options:
1. dhcpProcessing(1) -indicates DHCP processing.
2. pingProcessing(2) -indicates ping processing.
3.…
Enumeration
Enumerated Values:
1dhcpProcessing
2pingProcessing
3finished
4unknown
 .1.3.6.1.4.1.2011.5.113.1.2.1.1
hwDhcpSimulateResult
Indicates the simulation result of the current simulation instance.
Options:
1. sendPacketFail(1) -Indicates that the packet fails to be sent.
2. dhcpServerNotFound(2) -Indicate…
Enumeration
Enumerated Values:
1sendPacketFail
2dhcpServerNotFound
3dhcpServerRejectRequest
4getIpOvertime
5getIpSuccessful
6allPingSucceed
7partialPingSucceed
8allPingFail
9systemResourceNotEnough
10unknown
 .1.3.6.1.4.1.2011.5.113.1.2.1.2
hwDhcpSimulateUserIp
Indicates the simulation user IP address that is obtained in the DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.1.2.1.3
hwDhcpSimulateSubNetMask
Indicates the mask of the simulation user IP address that is obtained in the DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.1.2.1.4
hwDhcpSimulateDhcpServerIp
Indicates the DHCP server IP address in the DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.1.2.1.5
hwDhcpSimulatePrimaryDnsServerIp
Indicates the IP address of the primary DNS server in the DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.1.2.1.6
hwDhcpSimulateSecondaryDnsServerIp
Indicates the IP address of the secondary DNS server in the DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.1.2.1.7
hwDhcpSimulateGatewayIp
Indicates the IP address of the gateway in the DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.1.2.1.8
hwDhcpSimulateDefaultGatewayIp
Indicates the IP address of the default gateway in the DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.1.2.1.9
hwDhcpSimulateDest1IpAddr
Indicates the destination IP address of the first route in the DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.1.2.1.10
hwDhcpSimulateDest1MaskAddr
Indicates the mask corresponding to the destination IP address of the first route in the DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.1.2.1.11
hwDhcpSimulateDest1NextHop
Indicates the next hop IP address of the first route in the DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.1.2.1.12
hwDhcpSimulateDest2IpAddr
Indicates the destination IP address of the second route in the DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.1.2.1.13
hwDhcpSimulateDest2MaskAddr
Indicates the mask corresponding to the destination IP address of the second route in the DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.1.2.1.14
hwDhcpSimulateDest2NextHop
Indicates the next hop IP address of the second route in the DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.1.2.1.15
hwDhcpSimulateDest3IpAddr
Indicates the destination IP address of the third route in the DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.1.2.1.16
hwDhcpSimulateDest3MaskAddr
Indicates the mask corresponding to the destination IP address of the third route in the DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.1.2.1.17
hwDhcpSimulateDest3NextHop
Indicates the next hop IP address of the third route in the DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.1.2.1.18
hwDhcpSimulatePingHost1TotalCount
Indicates the total times of pinging the first host IP address in the DHCP simulation instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.113.1.2.1.19
hwDhcpSimulatePingHost1OkCount
Indicates the times of successfully pinging the first host IP address in the DHCP simulation instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.113.1.2.1.20
hwDhcpSimulatePingHost2TotalCount
Indicates the total times of pinging the second host IP address in the DHCP simulation instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.113.1.2.1.21
hwDhcpSimulatePingHost2OkCount
Indicates the times of successfully pinging the second host IP address in the DHCP simulation instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.113.1.2.1.22
hwDhcpSimulatePingHost3TotalCount
Indicates the total times of pinging the third host IP address in the DHCP simulation instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.113.1.2.1.23
hwDhcpSimulatePingHost3OkCount
Indicates the times of successfully pinging the third host IP address in the DHCP simulation instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.113.1.2.1.24
hwDhcpSimulatePingHost4TotalCount
Indicates the total times of pinging the fourth host IP address in the DHCP simulation instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.113.1.2.1.25
hwDhcpSimulatePingHost4OkCount
Indicates the times of successfully pinging the fourth host IP address in the DHCP simulation instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.113.1.2.1.26
hwDhcpSimulatePingHost5TotalCount
Indicates the total times of pinging the fifth host IP address in the DHCP simulation instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.113.1.2.1.27
hwDhcpSimulatePingHost5OkCount
Indicates the times of successfully pinging the fifth host IP address in the DHCP simulation instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.113.1.2.1.28
hwDhcpSimulateTftpServer
Indicates the name of the Tftp server in the DHCP simulation instance. The length is 0-256 bytes.
OctetString
Constraints:
range: 0-256
 .1.3.6.1.4.1.2011.5.113.1.2.1.29
hwDhcpSimulateBootFileName
Indicates the name of the boot file in the DHCP simulation instance. The length is 0-256 bytes.
OctetString
Constraints:
range: 0-256
 .1.3.6.1.4.1.2011.5.113.1.2.1.30
hwDhcpSimulateTimeServerIp
Indicates the IP address of the time server in the DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.1.2.1.31

hwOntDhcpSimulateCfgTable

table
.1.3.6.1.4.1.2011.5.113.2.1 · 1 row entry · 24 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwOntDhcpSimulateCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPDSLAM-SIMULATION-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPDSLAM-SIMULATION-MIB::hwOntDhcpSimulateCfgTable' 
This table is mainly used to configure the ONT DHCP simulation.
You can use the set operation to set a leave in the table to start an ONT DHCP simulation instance and simulate an actual user.
You can use the get operation to query the existing ONT DHCP simulation instances in the current system.
The indexes of this table are hwOntDhcpSimulatePortindex and hwOntDhcpSimulateOntId.
hwOntDhcpSimulateCfgEntry row .1.3.6.1.4.1.2011.5.113.2.1.1
This table is mainly used to configure the ONT DHCP simulation.
You can use the set operation to set a leave in the table to start an ONT DHCP simulation instance and simulate an actual user.
You can use the get operati…
Indexes
Column Syntax OID
hwOntDhcpSimulatePortindex
Indicates the ptp index corresponding to the user to be simulated in the ONT DHCP simulation instance.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.113.2.1.1.1
hwOntDhcpSimulateOntId
Indicates the ONT ID of the user to be simulated in the ONT DHCP simulation instance.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.113.2.1.1.2
hwOntDhcpSimulateOntPortId
Indicates the ONT port ID. All-Fs indicates that the port is a WAN port and non-all Fs indicates that the port is a user-side port.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.113.2.1.1.3
hwOntDhcpSimulateUserVlanTagNumber
Indicates the number of VLAN tags when user packets are sent to the ONT.
Range: 0-2.
0 - untag.
1 - simgle tag.
2 - double tag.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.113.2.1.1.4
hwOntDhcpSimulateUserOuterVlanId
Indicates the outer VLAN ID of user packets and is used with TagNumber.
This parameter can be ignored in the case of untag. It is valid in the case of single-tag or double-tag, and the range is 0-4095. All-Fs indicates …
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.113.2.1.1.5
hwOntDhcpSimulateUserOuterPriority
Indicates the outer VLAN priority of user packets and is used with TagNumber.
This parameter can be ignored in the case of untag. It is valid in the case of single-tag or double-tag, and the range is 0-7. All-Fs indicat…
Unsigned32r/w
Constraints:
range: 0-7
range: 4294967295-4294967295
 .1.3.6.1.4.1.2011.5.113.2.1.1.6
hwOntDhcpSimulateUserInnerVlanId
Indicates the inner VLAN ID of user packets and is used with TagNumber. This parameter is valid in the case of double-tag, and the range is 0-4095. All-Fs indicates invalid and no user input.
Range: 0-4095.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.113.2.1.1.7
hwOntDhcpSimulateUserInnerPriority
Indicates the inner VLAN priority of user packets and is used with TagNumber.
This parameter is valid in the case of double-tag, and the range is 0-7. All-Fs indicates invalid and no user input. The default value is 0 i…
Unsigned32r/w
Constraints:
range: 0-7
range: 4294967295-4294967295
 .1.3.6.1.4.1.2011.5.113.2.1.1.8
hwOntDhcpSimulateMacAddress
Indicates the source MAC address used in the simulation.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2011.5.113.2.1.1.9
hwOntDhcpSimulateOption60
Indicates the option 60 contents of the ONT DHCP simulation. Character string type, a string of 0-64 characters.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.5.113.2.1.1.10
hwOntDhcpSimulateOption61Type
Indicates the option 61 type of the ONT DHCP simulation. Values: 0-1. 0 indicates character string type and 1 indicate MAC address type.
Options:
1. string(0) -Indicates that the option 61 contents are a st…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.113.2.1.1.11
hwOntDhcpSimulateOption61ClientId
Indicates the option 61 contents of the ONT DHCP simulation. Character string type, a string of 0-64 characters.
Optiontype = 0 and null in this field indicate no user input for option 61.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.5.113.2.1.1.12
hwOntDhcpSimulatePingHost1IPAddress
Indicates the first host IP address to be pinged in the ONT DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity t…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.2.1.1.13
hwOntDhcpSimulatePingHost2IPAddress
Indicates the second host IP address to be pinged in the ONT DHCP simulation. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to the ho…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.2.1.1.14
hwOntDhcpSimulatePingHost3IPAddress
Indicates the third host IP address to be pinged in the ONT DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity t…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.2.1.1.15
hwOntDhcpSimulatePingHost4IPAddress
Indicates the fourth host IP address to be pinged in the ONT DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity …
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.2.1.1.16
hwOntDhcpSimulatePingHost5IPAddress
Indicates the fifth host IP address to be pinged in the ONT DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity t…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.2.1.1.17
hwOntDhcpSimulateRowStatus
Indicates the operation type and is mainly used to start or stop the ONT DHCP simulation. During query, if the corresponding simulation instance exists, the result is active.
Options:
1. active(1) -in…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.113.2.1.1.18
hwOntDhcpSimulateOntPortType
Indicates the ONT port type of the user to be simulated in the ONT DHCP simulation instance.
Options:
1. laneth(1) -indicates the type of the ONT port is ETH
2. lanvdsl(2) -indicates the type of the ONT port …
Enumerationr/w
Enumerated Values:
1laneth
2lanvdsl
3wan
 .1.3.6.1.4.1.2011.5.113.2.1.1.19
hwOntDhcpSimulateMulticastGroupIPType
Indicates the address type.
Options:
1. IPv4(1) -indicates the address type is IPv4.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.5.113.2.1.1.20
hwOntDhcpSimulateMulticastGroupIP
Indicates the group IP address of the program. The format of this index is consistent with that of the address type.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.5.113.2.1.1.21
hwOntDhcpSimulateMulticastVersion
Indicates the multicast version in the ONT Multicast simulation instance.
Options:
1. igmpV2(1) -indicates the multicast version is IGMPV2. …
Enumerationr/w
Enumerated Values:
1igmpV2
2igmpV3
 .1.3.6.1.4.1.2011.5.113.2.1.1.22
hwOntDhcpSimulateMulticastSourceIPType
Indicates the address type.
Options:
1. IPv4(1) -indicates the address type is IPv4.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.5.113.2.1.1.23
hwOntDhcpSimulateMulticastSourceIP
Indicates the source IP address of the program. The format of this index is consistent with that of the address type.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.5.113.2.1.1.24

hwOntDhcpSimulateResultTable

table
.1.3.6.1.4.1.2011.5.113.2.2 · 1 row entry · 29 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwOntDhcpSimulateResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-IPDSLAM-SIMULATION-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-IPDSLAM-SIMULATION-MIB::hwOntDhcpSimulateResultTable' 
Indicates the ONT simulation result. During simulation, you can perform the get operation to query the simulation result of the simulation instance.
The indexes of this table are hwOntDhcpSimulatePortindex and hwOntDhcpSimulateOntId.
hwOntDhcpSimulateResultEntry row .1.3.6.1.4.1.2011.5.113.2.2.1
Indicates the ONT simulation result. During simulation, you can perform the get operation to query the simulation result of the simulation instance.
The indexes of this entry are hwOntDhcpSimulatePortindex and hwOntDhcp…
Indexes
Column Syntax OID
hwOntDhcpSimulateStatus
Indicates the simulation status of the current simulation instance.
Options:
1. dhcpProcessing(1) -Indicates DHCP processing.
2. pingProcessing(2) -Indicates ping processing.
3. finishe…
Enumeration
Enumerated Values:
1dhcpProcessing
2pingProcessing
3finished
4unknown
5btvProcessing
 .1.3.6.1.4.1.2011.5.113.2.2.1.1
hwOntDhcpSimulateResult
Indicates the simulation result of the current simulation instance.
Options:
1. success(1) -Indicates that ont dhcp simulation succeeds.
2. userStop(2) -Indicates that user…
Enumeration
Enumerated Values:
1success
2userStop
3deviceNotSupport
4portNotFound
5userMacError
6pingDestIpError
7vlanPriParaError
8dhcpOptionError
9wanNotFound
10wanStateError
11portStateError
12userVlanError
13devResourceNotEnough
14gemportError
15sendPktError
16dhcpServerNotFound
17dhcpServerDeny
18getIpTimeout
19concurrentSmltForbidden
20allPingFail
21partialPingFail
22unknown
23btvTestFail
24btvTestSuccess
25btvTestUserStopped
26btvTestGroupIpError
27btvTestSourceIpError
28btvTestIGMPVersionError
29btvTestVlanError
30btvTestStartError
 .1.3.6.1.4.1.2011.5.113.2.2.1.2
hwOntDhcpSimulateUserIp
Indicates the simulation user IP address that is obtained in the ONT DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.2.2.1.3
hwOntDhcpSimulateSubNetMask
Indicates the mask of the simulation user IP address that is obtained in the ONT DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.2.2.1.4
hwOntDhcpSimulateDhcpServerIp
Indicates the DHCP server IP address in the ONT DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.2.2.1.5
hwOntDhcpSimulatePrimaryDnsServerIp
Indicates the IP address of the primary DNS server in the ONT DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.2.2.1.6
hwOntDhcpSimulateSecondaryDnsServerIp
Indicates the IP address of the secondary DNS server in the ONT DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.2.2.1.7
hwOntDhcpSimulateGatewayIp
Indicates the IP address of the gateway in the ONT DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.2.2.1.8
hwOntDhcpSimulateDefaultGatewayIp
Indicates the IP address of the default gateway in the ONT DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.2.2.1.9
hwOntDhcpSimulateDest1IpAddr
Indicates the destination IP address of the first route in the ONT DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.2.2.1.10
hwOntDhcpSimulateDest1MaskAddr
Indicates the mask corresponding to the destination IP address of the first route in the ONT DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.2.2.1.11
hwOntDhcpSimulateDest1NextHop
Indicates the next hop IP address of the first route in the ONT DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.2.2.1.12
hwOntDhcpSimulateDest2IpAddr
Indicates the destination IP address of the second route in the ONT DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.2.2.1.13
hwOntDhcpSimulateDest2MaskAddr
Indicates the mask corresponding to the destination IP address of the second route in the ONT DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.2.2.1.14
hwOntDhcpSimulateDest2NextHop
Indicates the next hop IP address of the second route in the ONT DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.2.2.1.15
hwOntDhcpSimulateDest3IpAddr
Indicates the destination IP address of the third route in the ONT DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.2.2.1.16
hwOntDhcpSimulateDest3MaskAddr
Indicates the mask corresponding to the destination IP address of the third route in the ONT DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.2.2.1.17
hwOntDhcpSimulateDest3NextHop
Indicates the next hop IP address of the third route in the ONT DHCP simulation instance.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.113.2.2.1.18
hwOntDhcpSimulatePingHost1TotalCount
Indicates the total times of pinging the first host IP address in the ONT DHCP simulation instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.113.2.2.1.19
hwOntDhcpSimulatePingHost1OkCount
Indicates the times of successfully pinging the first host IP address in the ONT DHCP simulation instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.113.2.2.1.20
hwOntDhcpSimulatePingHost2TotalCount
Indicates the total times of pinging the second host IP address in the ONT DHCP simulation instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.113.2.2.1.21
hwOntDhcpSimulatePingHost2OkCount
Indicates the times of successfully pinging the second host IP address in the ONT DHCP simulation instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.113.2.2.1.22
hwOntDhcpSimulatePingHost3TotalCount
Indicates the total times of pinging the third host IP address in the ONT DHCP simulation instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.113.2.2.1.23
hwOntDhcpSimulatePingHost3OkCount
Indicates the times of successfully pinging the third host IP address in the ONT DHCP simulation instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.113.2.2.1.24
hwOntDhcpSimulatePingHost4TotalCount
Indicates the total times of pinging the fourth host IP address in the ONT DHCP simulation instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.113.2.2.1.25
hwOntDhcpSimulatePingHost4OkCount
Indicates the times of successfully pinging the fourth host IP address in the ONT DHCP simulation instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.113.2.2.1.26
hwOntDhcpSimulatePingHost5TotalCount
Indicates the total times of pinging the fifth host IP address in the ONT DHCP simulation instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.113.2.2.1.27
hwOntDhcpSimulatePingHost5OkCount
Indicates the times of successfully pinging the fifth host IP address in the ONT DHCP simulation instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.113.2.2.1.28
hwOntDhcpSimulateMulticastDataRate
Indicates the multicast date rate of the current simulation instance, it is valid when the simulation result is success. Unit: kbps.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.113.2.2.1.29