HUAWEI-ETHARP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
18
Rows
18
Columns
85

hwEthernetARPSpeedLimitTable

table
.1.3.6.1.4.1.2011.5.25.123.1.3 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEthernetARPSpeedLimitTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ETHARP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ETHARP-MIB::hwEthernetARPSpeedLimitTable' 
The table contains the configuration information of Ethernet ARP Speed limit slot. 
The information includes type, speedvalue, sourceip and destip.
hwEthernetARPSpeedLimitEntry row .1.3.6.1.4.1.2011.5.25.123.1.3.1
The table contains the configuration information of Ethernet ARP Speed limit slot.
The information includes type, speedvalue, sourceip and destip.
Indexes
Column Syntax OID
hwEthernetARPLimitSlot
The slot of ARP Speed Limit.
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.2011.5.25.123.1.3.1.1
hwEthernetARPLimitType
The Type of ARP Speed Limit.
Enumeration
Enumerated Values:
1arp
2arpmiss
 .1.3.6.1.4.1.2011.5.25.123.1.3.1.2
hwEthernetARPLimitIPType
ARP speed limit is performed on a source or a destination IP address.
Enumeration
Enumerated Values:
4sourceip
8destinationip
 .1.3.6.1.4.1.2011.5.25.123.1.3.1.3
hwEthernetARPLimitSpeedValue
The Speed Value of ARP Speed Limit.
Unsigned32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.2011.5.25.123.1.3.1.4

hwEthernetARPStaticsTable

table
.1.3.6.1.4.1.2011.5.25.123.1.11 · 1 row entry · 11 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEthernetARPStaticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ETHARP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ETHARP-MIB::hwEthernetARPStaticsTable' 
A table contains the statistics about Ethernet ARP. 
The statistics include number of received ARP packets, 
number of received ARP-MISS packets, number of learned ARP packets, 
number of discarded ARP packets caused by the ARP limit, 
the number of discarded ARP-MISS packets caused by the limit 
and the number of discarded ARP and ARP-MISS packets caused by other reasons.
hwEthernetARPStaticsEntry row .1.3.6.1.4.1.2011.5.25.123.1.11.1
A table contains the statistics about Ethernet ARP.
The statistics include number of received ARP packets,
number of received ARP-MISS packets, number of learned ARP packets,
number of discarded ARP packets caused by…
Indexes
Column Syntax OID
hwEthernetARPStaticsSlot
The slot about which the ARP statistics are displayed.
Integer32
Constraints:
range: 0-128
range: 65535-65535
 .1.3.6.1.4.1.2011.5.25.123.1.11.1.1
hwEthernetARPStaticsLearnTotal
The total number of the learned ARP packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.123.1.11.1.2
hwEthernetARPDropForLimit
The number of discarded packets caused by limit.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.123.1.11.1.3
hwEthernetARPDropForARPSuppress
The number of discarded packets caused by the ARP suppress.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.123.1.11.1.4
hwEthernetARPDropForARPMissSuppress
The number of discarded packets caused by the ARP-MISS suppress.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.123.1.11.1.5
hwEthernetARPDropForOther
The number of discarded ARP packets caused by other reasons.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.123.1.11.1.6
hwEthernetARPMissDropForOther
The number of discarded ARP-MISS caused by other reasons.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.123.1.11.1.7
hwEthernetARPRcvNum
The number of received ARP packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.123.1.11.1.8
hwEthernetARPMissRcvNum
The number of received ARP-MISS.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.123.1.11.1.9
hwEthernetARPStaticsOperation
resets the statistics about Ethernet ARP.
Enumerationr/w
Enumerated Values:
1reset
2unused
 .1.3.6.1.4.1.2011.5.25.123.1.11.1.10
hwEthernetARPDropForARPProxySuppress
The number of discarded packets caused by the ARP-PROXY suppress.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.123.1.11.1.11

hwEthARPShowWithInterAndVidTable

table
.1.3.6.1.4.1.2011.5.25.123.1.12 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEthARPShowWithInterAndVidTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ETHARP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ETHARP-MIB::hwEthARPShowWithInterAndVidTable' 
Display the ARP table based on interface number or interface number and VLAN ID.
hwEthARPShowWithInterAndVidEntry row .1.3.6.1.4.1.2011.5.25.123.1.12.1
Display the ARP table based on interface number or interface number and VLAN ID.
Indexes
Column Syntax OID
hwEthARPShowIfindex
The interface learns ARP packets.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.123.1.12.1.1
hwEthARPShowVid
The VLAN receives the APR packets.
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.2011.5.25.123.1.12.1.2
hwEthARPIpAddr
The ip of ARP .
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.123.1.12.1.3
hwEthARPMacAddr
The MAC of ARP .
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.2011.5.25.123.1.12.1.4

hwEthARPLimitTable

table
.1.3.6.1.4.1.2011.5.25.123.1.13 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEthARPLimitTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ETHARP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ETHARP-MIB::hwEthARPLimitTable' 
Configure the ARP limit based on interfaces or VLANs.
hwEthARPLimitEntry row .1.3.6.1.4.1.2011.5.25.123.1.13.1
Configure the ARP limit based on interfaces or VLANs.
Indexes
Column Syntax OID
hwEthARPLimitCfgIfindex
The interface on which the limit is configured.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.123.1.13.1.1
hwEthARPVLANFirst
The VLAN to which Layer 2 interfaces belong.
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.2011.5.25.123.1.13.1.2
hwEthARPVLANLast
The VLAN to which Layer 2 interfaces belong.
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.2011.5.25.123.1.13.1.3
hwEthARPLimitNum
The value of the ARP limit.
Integer32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2011.5.25.123.1.13.1.4
hwEthARPLimitRowStatus
The running status of the ARP limit table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.123.1.13.1.5

hwEthernetARPLearningStrictInterfaceTable

table
.1.3.6.1.4.1.2011.5.25.123.1.14 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEthernetARPLearningStrictInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ETHARP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ETHARP-MIB::hwEthernetARPLearningStrictInterfaceTable' 
Configure the ARP Learning Strict based on interfaces.
hwEthernetARPLearningStrictInterfaceEntry row .1.3.6.1.4.1.2011.5.25.123.1.14.1
Configure the ARP Learning Strict based on interfaces.
Indexes
Column Syntax OID
hwEthernetARPLearningStrictIfindex
The interface on which the ARP Learning Strict be configured.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.123.1.14.1.1
hwEthernetARPLearningStrictState
The ARP Learning Strict State be configured.
Enumerationr/w
Enumerated Values:
1forceEnable
2forceDisable
 .1.3.6.1.4.1.2011.5.25.123.1.14.1.2
hwEthernetARPLearningStrictRowStatus
The running status of the ARP Learning Strict table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.123.1.14.1.3

hwArpLinkInterfaceTable

table
.1.3.6.1.4.1.2011.5.25.123.1.15 · 1 row entry · 7 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwArpLinkInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ETHARP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ETHARP-MIB::hwArpLinkInterfaceTable' 
Config ARP link interface:
hwArpLinkIfIndex: interface index
hwArpLinkPeerIp: peer ip
hwArpLinkDetectTime: detection time between two ARP packects
hwArpLinkDetectTimes: detection times of ARP packects
hwArpLinkDetectMode: detection mode
hwArpLinkStatus: interface status
hwArpLinkRowStatus: the row status of this row.
hwArpLinkInterfaceEntry row .1.3.6.1.4.1.2011.5.25.123.1.15.1
Config ARP link interface:
hwArpLinkIfIndex: interface index
hwArpLinkPeerIp: peer ip
hwArpLinkDetectTime: detection time between two ARP packects
hwArpLinkDetectTimes: detection times of ARP packects
hwArpLinkDetectMod…
Indexes
Column Syntax OID
hwArpLinkIfIndex
The index of interface which is configed to be linked by ARP,
the zero value is invalid.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2011.5.25.123.1.15.1.1
hwArpLinkPeerIp
The IP address which ARP detecting packet will send to. When
creating a new record or modifying the peer ip address, a check for
this ip will be generated. If it is invalid, that operation will
be not applicable.
INET-ADDRESS-MIBInetAddressIPv4r/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.123.1.15.1.11
hwArpLinkDetectTime
The interval time for two ARP packets are sent to detect the
peer's interface status, this time unit is millisecond. The valid
range is from 200 to 10000, and the default value is 1000.
Integer32r/w
Constraints:
range: 200-10000
 .1.3.6.1.4.1.2011.5.25.123.1.15.1.12
hwArpLinkDetectTimes
After the max detecting times for ARP packet is sent to, and there is not
any response, the sender can judge the peer interface is down. Then, setting
the status of current interface down. The valid range is from 1 to…
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.2011.5.25.123.1.15.1.13
hwArpLinkDetectMode
The detecting mode for ARP linking interface. If the mode is loose and its
status is down, current interface just wait to receive the ARP packet, when
received peer's arp packet, current interface status is up. If mod…
Enumerationr/w
Enumerated Values:
1loose
2strict
 .1.3.6.1.4.1.2011.5.25.123.1.15.1.14
hwArpLinkStatus
The status of interface linked by ARP. This value can not be set anytime.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2011.5.25.123.1.15.1.15
hwArpLinkRowStatus
The row status of ARP link table. The detail can be found from the rowstatus definition.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.123.1.15.1.51

hwArpEntryExpireControlTable

table
.1.3.6.1.4.1.2011.5.25.123.1.16 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwArpEntryExpireControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ETHARP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ETHARP-MIB::hwArpEntryExpireControlTable' 
The value of the object identifies the parameters of ARP aging detection, 
such as ARP detection mode, start time, detection times. At present, 
only the ARP detection mode and ARP fake-entry expire time can be configured.
hwArpEntryExpireIfIndex: indicates the interface index.
hwArpEntryExpireDetectMode: indicates the unicast or broadcast ARP aging detection mode.
hwArpEntryExpireFakeTime: indicates the expire time of ARP fake entry.
hwArpEntryExpireControlEntry row .1.3.6.1.4.1.2011.5.25.123.1.16.1
The value of the object identifies the parameters of ARP aging detection,
such as ARP detection mode, start time, detection times. At present,
only the ARP detection mode and ARP fake-entry expire time can be configur…
Indexes
Column Syntax OID
hwArpEntryExpireIfIndex
This object indicates the index of an interface on which ARP aging detection
parameters are set. The value 0 is invalid.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.123.1.16.1.1
hwArpEntryExpireDetectMode
This object indicates the ARP aging detection mode. In unicast ARP detection mode,
unicast ARP detection packets are sent before ARP ages. In broadcast ARP detection mode,
broadcast ARP detection packets are sent befo…
Enumerationr/w
Enumerated Values:
1broadcast
2unicast
 .1.3.6.1.4.1.2011.5.25.123.1.16.1.2
hwArpEntryExpireFakeTime
This object indicates the expire time of ARP fake entry. The valid range is from 1 to 36000.
Integer32r/w
Constraints:
range: 1-36000
 .1.3.6.1.4.1.2011.5.25.123.1.16.1.3

hwArpDynTable

table
.1.3.6.1.4.1.2011.5.25.123.1.17 · 1 row entry · 8 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwArpDynTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ETHARP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ETHARP-MIB::hwArpDynTable' 
The value of the object identifies the items of ARP table, 
such as IP address of ARP items, VPN instance name of ARP items, 
MAC address of ARP items, VLAN information of ARP items, expire time of ARP items. 
hwArpDynEntryIfIndex: indicates the interface index.
hwArpDynEntryIpAdd: indicates the IP address.
hwArpDynEntryVrf: indicates the VPN instance name.
hwArpDynEntryMacAdd: indicates the MAC address.
hwArpDynEntryVlanId: indicates the VLAN of ARP item.
hwArpDynEntryCeVlanId: indicates the CE VLAN of ARP item.
hwArpDynEntryOutIfIndex: indicates the forwarding interface.
hwArpDynEntryExpireTime: indicates the expire time of ARP item.
hwArpDynEntry row .1.3.6.1.4.1.2011.5.25.123.1.17.1
The value of the object identifies the items of dynamic ARP table,
such as IP address of ARP items, VPN instance name of ARP items,
MAC address of ARP items, VLAN information of ARP items, expire time of ARP items.
h…
Indexes
Column Syntax OID
hwArpDynIfIndex
The logic forwarding interface. The value 0 is invalid.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2011.5.25.123.1.17.1.1
hwArpDynIpAdd
This object indicates the IP address of an ARP items. The value 0 is invalid.
INET-ADDRESS-MIBInetAddressIPv4
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.123.1.17.1.2
hwArpDynVrf
This object indicates the VPN name of an ARP items.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.5.25.123.1.17.1.3
hwArpDynMacAdd
This object indicates the MAC address of an ARP items.
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.2011.5.25.123.1.17.1.11
hwArpDynVlanId
This object indicates the VLAN of an ARP items.
Integer32
Constraints:
range: 0-4096
 .1.3.6.1.4.1.2011.5.25.123.1.17.1.12
hwArpDynCeVlanId
This object indicates the CE VLAN of an ARP items.
Integer32
Constraints:
range: 0-4096
 .1.3.6.1.4.1.2011.5.25.123.1.17.1.13
hwArpDynOutIfIndex
The physical forwarding interface.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.123.1.17.1.14
hwArpDynExpireTime
This object indicates the expire time of an ARP items.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.5.25.123.1.17.1.15

hwArpCfgTable

table
.1.3.6.1.4.1.2011.5.25.123.1.18 · 1 row entry · 7 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwArpCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ETHARP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ETHARP-MIB::hwArpCfgTable' 
The value of the object identifies the items of static ARP table, 
such as IP address of ARP items, VPN instance name of ARP items, 
MAC address of ARP items, VLAN information of ARP items.  
hwArpDynEntryIpAdd: indicates the IP address.
hwArpDynEntryVrf: indicates the VPN instance name.
hwArpDynEntryMacAdd: indicates the MAC address.
hwArpDynEntryVlanId: indicates the VLAN of ARP item.
hwArpDynEntryCeVlanId: indicates the CE VLAN of ARP item.
hwArpDynEntryOutIfIndex: indicates the forwarding interface.
hwArpCfgEntry row .1.3.6.1.4.1.2011.5.25.123.1.18.1
The value of the object identifies the items of static ARP table,
such as IP address of ARP items, VPN instance name of ARP items,
MAC address of ARP items, VLAN information of ARP items.
hwArpDynEntryIpAdd: indicat…
Indexes
Column Syntax OID
hwArpCfgIpAdd
This object indicates the IP address of an ARP items. The value 0 is invalid.
INET-ADDRESS-MIBInetAddressIPv4
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.123.1.18.1.1
hwArpCfgMacAdd
This object indicates the MAC address of an ARP items.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2011.5.25.123.1.18.1.2
hwArpCfgVrf
This object indicates the VPN name of an ARP items.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.5.25.123.1.18.1.3
hwArpCfgVlanId
This object indicates the VLAN of an ARP items.
Integer32r/w
Constraints:
range: 0-4096
 .1.3.6.1.4.1.2011.5.25.123.1.18.1.11
hwArpCfgCeVlanId
This object indicates the CE VLAN of an ARP items.
Integer32r/w
Constraints:
range: 0-4096
 .1.3.6.1.4.1.2011.5.25.123.1.18.1.12
hwArpCfgOutIfIndex
The physical forwarding interface.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.5.25.123.1.18.1.13
hwArpCfgRowstatus
This object indicates the row status of an static ARP item.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.123.1.18.1.51

hwArpEntryGatewayConflictTable

table
.1.3.6.1.4.1.2011.5.25.123.1.23 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwArpEntryGatewayConflictTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ETHARP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ETHARP-MIB::hwArpEntryGatewayConflictTable' 
The value of the object identifies the information about the source of the attack. 
It contains IP address, MAC, VLAN ID and interface.
hwArpEntryGatewayConflictEntry row .1.3.6.1.4.1.2011.5.25.123.1.23.1
The value of the object identifies the information about the source of the attack.
It contains IP address, MAC, VLAN ID and interface.
Indexes
Column Syntax OID
hwEthernetARPAntiGatewayConflictIndex
The index of the gateway conflict entries.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.2011.5.25.123.1.23.1.1
hwEthernetARPAntiGatewayConflictIpAddress
This object indicates the IP address is attacked.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.123.1.23.1.2
hwEthernetARPAntiGatewayConflictMacAddress
This object indicates the MAC of the attack-source.
OctetString .1.3.6.1.4.1.2011.5.25.123.1.23.1.3
hwEthernetARPAntiGatewayConflictVlanId
This object indicates the VLAN ID of the attack-source.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.2011.5.25.123.1.23.1.4
hwEthernetARPAntiGatewayConflictIfName
This object indicates the interface of the attack-source.
OctetString .1.3.6.1.4.1.2011.5.25.123.1.23.1.5

hwArpSecValidateTable

table
.1.3.6.1.4.1.2011.5.25.123.1.24 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwArpSecValidateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ETHARP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ETHARP-MIB::hwArpSecValidateTable' 
The table contains the arp validation information on the interface.
hwArpSecValidateEntry row .1.3.6.1.4.1.2011.5.25.123.1.24.1
The entry contains the arp validation information on the interface.
Indexes
Column Syntax OID
hwArpSecValidateIfIndex
The index of the arp validation entries.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.123.1.24.1.1
hwArpSecValidateSmac
indicates check the source-mac of arp packet head and the ethernet packet head.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.123.1.24.1.2
hwArpSecValidateDmac
indicates check the destination-mac of arp packet head and the ethernet packet head.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.123.1.24.1.3
hwArpSecValidateRowStatus
This object specifies the status of the arp validation table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.123.1.24.1.51

hwARPGratuitousSendTable

table
.1.3.6.1.4.1.2011.5.25.123.1.25 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwARPGratuitousSendTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ETHARP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ETHARP-MIB::hwARPGratuitousSendTable' 
The table contains the arp validation information on the interface.
hwARPGratuitousSendEntry row .1.3.6.1.4.1.2011.5.25.123.1.25.1
The entry contains the gratuitous arp send information on the vlanif interface.
Indexes
Column Syntax OID
hwARPGratuitousSendIfIndex
The ifindex of the ARP gratuitous send configed.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.123.1.25.1.1
hwARPGratuitousSendEnable
This object indicates the status of the gratuitous-arp send.
P-BRIDGE-MIBEnabledStatus
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.123.1.25.1.2
hwARPArpGratuitousSendInterval
This object indicates the interval of the gratuitous-arp send.
The value ranges from 1 to 86400, in second, with default value 90.
Integer32
Constraints:
range: 1-86400
 .1.3.6.1.4.1.2011.5.25.123.1.25.1.3

hwEthernetARPLearnStopTable

table
.1.3.6.1.4.1.2011.5.25.123.1.29 · 1 row entry · 2 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEthernetARPLearnStopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ETHARP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ETHARP-MIB::hwEthernetARPLearnStopTable' 
The value of the object identifies the parameters of ARP learning disable threshold.
hwEthernetARPLearnStopSlot: indicates the slot.
hwEthernetARPLearnStopThreshold: indicates the threshold usage of memory for learning ARP.
hwEthernetARPLearnStopEntry row .1.3.6.1.4.1.2011.5.25.123.1.29.1
The value of the object identifies the parameters of of ARP learning disable threshold.
hwEthernetARPLearnStopSlot: indicates the slot of the alarm generated.
hwEthernetARPLearnStopThreshold: indicates the threshold usa…
Indexes
Column Syntax OID
hwEthernetARPLearnStopSlot
This object indicates the the slot of the alarm generated.
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.2011.5.25.123.1.29.1.1
hwEthernetARPLearnStopThreshold
This object indicates the threshold usage of memory for learning ARP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.123.1.29.1.2

hwArpStatisticsTable

table
.1.3.6.1.4.1.2011.5.25.123.1.30 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwArpStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ETHARP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ETHARP-MIB::hwArpStatisticsTable' 
The table contains the arp information of the interfaces.
hwArpStatisticsEntry row .1.3.6.1.4.1.2011.5.25.123.1.30.1
The entry contains the arp information of the interfaces.
Indexes
Column Syntax OID
hwArpStatisticsSlot
The slot of ARP Statics Verbose.
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.2011.5.25.123.1.30.1.1
hwArpStatisticsType
The Type of Interface Learn ARP.
Enumeration
Enumerated Values:
1phy
2ve
3ethTrunk
4vlanif
5phyQinq
6ethTrunkQinq
7veQinq
 .1.3.6.1.4.1.2011.5.25.123.1.30.1.2
hwArpStatisticsLearnedCount
Number of ARP entries learned by this type of interfaces.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.123.1.30.1.3
hwArpStatisticsAvailableCount
The avaiable number of ARP entries of this type of interfaces.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.123.1.30.1.4

hwEthernetARPHostInfoTable

table
.1.3.6.1.4.1.2011.5.25.123.1.32 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEthernetARPHostInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ETHARP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ETHARP-MIB::hwEthernetARPHostInfoTable' 
The table contains the information of local host and remote host. 
The information includes host IP, host MAC, gateway VtepIP, gateway VNIID.
hwEthernetARPHostInfoEntry row .1.3.6.1.4.1.2011.5.25.123.1.32.1
Entries of the host information table.
Indexes
Column Syntax OID
hwEthernetARPHostIPAddress
This object indicates the host IP address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.123.1.32.1.1
hwEthernetARPGatewayVNIID
This object indicates the VNI ID of gateway.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.123.1.32.1.2
hwEthernetARPHostMAC
This object indicates the host MAC.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2011.5.25.123.1.32.1.3
hwEthernetARPGatewayVtepIP
This object indicates the VTEP IP of gateway.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.123.1.32.1.4
hwEthernetARPInterface
This object indicates the interface of gateway.
OctetString .1.3.6.1.4.1.2011.5.25.123.1.32.1.5

hwArpNumberStatisticsTable

table
.1.3.6.1.4.1.2011.5.25.123.1.33 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwArpNumberStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ETHARP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ETHARP-MIB::hwArpNumberStatisticsTable' 
The table contains the number of ARP entries of the slot.
hwArpNumberStatisticsEntry row .1.3.6.1.4.1.2011.5.25.123.1.33.1
The entry contains the number of ARP entries of the slot.
Indexes
Column Syntax OID
hwArpNumberStatisticsSlot
The slot of ARP entries.
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.2011.5.25.123.1.33.1.1
hwArpNumberStatic
Number of static ARP entries of slot.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.123.1.33.1.2
hwArpNumberDynamic
Number of dynamic ARP entries of slot.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.123.1.33.1.3

hwEthernetARPGateWayDuplicateInfoTable

table
.1.3.6.1.4.1.2011.5.25.123.1.34 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEthernetARPGateWayDuplicateInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ETHARP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ETHARP-MIB::hwEthernetARPGateWayDuplicateInfoTable' 
The table contains the information of ARP packet with a duplicate IP address from the interface. 
The information includes gateway ifname, gateway IP.
hwEthernetARPGateWayDuplicateInfoEntry row .1.3.6.1.4.1.2011.5.25.123.1.34.1
Entries of the ARP packet with a duplicate IP address information table.
Indexes
Column Syntax OID
hwEthernetARPGateWayIfName
This object indicates the IfName of gateway.
OctetString .1.3.6.1.4.1.2011.5.25.123.1.34.1.1
hwEthernetARPGateWayPortName
This object indicates the PortName of gateway.
OctetString .1.3.6.1.4.1.2011.5.25.123.1.34.1.2
hwEthernetARPGateWayIP
This object indicates the IP of gateway.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.123.1.34.1.3

hwEthernetARPLimitExceedInfoTable

table
.1.3.6.1.4.1.2011.5.25.123.1.37 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEthernetARPLimitExceedInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ETHARP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ETHARP-MIB::hwEthernetARPLimitExceedInfoTable' 
The table contains the information of learnt ARP packet. 
The information includes interface of arp packet, the learnt number of arp packet, the limit number of arp packet, the recover reason of arp limit.
hwEthernetARPLimitExceedInfoEntry row .1.3.6.1.4.1.2011.5.25.123.1.37.1
This object indicates Entries of the learnt ARP packet.
Indexes
Column Syntax OID
hwEthernetARPLimitExceedInterface
This object indicates the interface name.
OctetString .1.3.6.1.4.1.2011.5.25.123.1.37.1.1
hwEthernetARPLimitExceedLimitNumber
This object indicates the maximum number of entries.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.123.1.37.1.2
hwEthernetARPLimitExceedLearnedNumber
This object indicates the number of learned entries.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.123.1.37.1.3
hwEthernetARPLimitExceedRecoverReason
This object indicates the cause of the recovery.
OctetString .1.3.6.1.4.1.2011.5.25.123.1.37.1.4