HUAWEI-ENVIRONMENT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
13
Rows
13
Columns
154

hwEnvironmentInfoTable

table
.1.3.6.1.4.1.2011.6.1.1.1 · 1 row entry · 13 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEnvironmentInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ENVIRONMENT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ENVIRONMENT-MIB::hwEnvironmentInfoTable' 
Information table of Environment Monitor Unit. 
The Environment Monitor Unit is some kind of Environment monitoring device 
and is used to monitor many kinds of Environment data. 
The maximum number of Environment Monitor Units in one device node is 64.  
The index of this table is hwEnvEmuIndex. 
hwEnvEmuIndex is the index of one Environment Monitor Unit.
hwEnvironmentInfoEntry row .1.3.6.1.4.1.2011.6.1.1.1.1
Information table of Environment Monitor Unit.
The Environment Monitor Unit is some kind of Environment monitoring device
and is used to monitor many kinds of Environment data.
The maximum number of Environment Monit…
Indexes
Column Syntax OID
hwEnvEmuIndex
hwEnvEmuIndex is the index of the Environment monitoring unit,
used as the index of hwEnvironmentInfoTable.
Range: 0 - 2048
Integer32
Constraints:
range: 0-2048
 .1.3.6.1.4.1.2011.6.1.1.1.1.1
hwEnvEmuType
Type of the physical monitoring devices associated with the environment monitoring unit.
Options:
1.h302ESC(1) -Type of the physical monitoring devices is H302ESC
2.h303ESC(2) -Type of the physical…
Enumerationr/w
Enumerated Values:
1h302ESC
2h303ESC
3h4875
4h301ESC
5switch
6fanEscFrame
7fanFrame
8h4845
9fanFCBFrame
10fanFDMUFrame
11h304ESC
12pwma
13h561esc
14h801esc
15h612pwbp
16pse158
19h4805
20pdu
21acrmu
22acfan
23dcfan
24rmun1509
25onps150
26h801pmix
27h4875L
28miniESC
29h831VESC
30h601VESC
31h4830L
32h801citx
33h801citd
34h831ccuh
35h831pmu
36pwr3000
37tcu
38liFeBattery
39transemu
40smu
41vpea
42h801VESC
43leadAcidBattery
44h801PMU
45h901VESC
46rpsr
47emub
255other
 .1.3.6.1.4.1.2011.6.1.1.1.1.2
hwEnvBoardName
Name of the environment monitoring unit.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.6.1.1.1.1.3
hwEnvCommState
Status of the communication between the environment monitoring unit and the device.
The environmental condition can be tested only when the communication is normal.
Options:
1.normal(1) - indicates that communicat…
Enumeration
Enumerated Values:
1normal
2shutdown
3fault
4abnormal
5config
 .1.3.6.1.4.1.2011.6.1.1.1.1.4
hwEnvRowStatus
RowStatus standard operation.
The creation and deletion operations are supported currently.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.6.1.1.1.1.5
hwEnvVersion
Version information of the environment monitoring unit.
invalid(zero-length)
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.6.1.1.1.1.6
hwEnvFrameId
ID of the shelf housing the environment monitoring unit.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.1.1.7
hwEnvAdminStatus
The management status of the monitoring unit.
Options:
1.noOperation(1) -no any operation
2.reset(2) -reset the monitoring board
3.manage(3) -manage the monitoring unit
4.unmanage(4) …
Enumerationr/w
Enumerated Values:
1noOperation
2reset
3manage
4unmanage
5clearsmokealarm
 .1.3.6.1.4.1.2011.6.1.1.1.1.8
hwEnvSlaveNodeId
ID of the slave object that the environment monitoring unit belongs to.
The environment monitoring unit uses the slave object ID to communicate
with the upstream equipment.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.1.1.9
hwEnvComType
The serial communication protocol type between the monitoring unit
and the upstream equipment. The protocol types used are as follows:
Options:
1.unknown(1) -The protocol types is unknown
2.serialRS485(2) -Th…
Enumerationr/w
Enumerated Values:
1unknown
2serialRS485
3serialRS232
4serialRS422
 .1.3.6.1.4.1.2011.6.1.1.1.1.10
hwEnvCLEICode
Environment CLEI Code.
OctetString
Constraints:
range: 0-640
 .1.3.6.1.4.1.2011.6.1.1.1.1.11
hwEnvEmuPower
Power of the environment monitoring equipment associated with the
environment monitoring unit. Unit: Watt.
Invalid:-1.
Integer32
Constraints:
range: -1-255
 .1.3.6.1.4.1.2011.6.1.1.1.1.12
hwEnvEmuTypeName
Name of the environment type.
Invalid: null string.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.6.1.1.1.1.13

hwAnaChannelTable

table
.1.3.6.1.4.1.2011.6.1.1.2 · 1 row entry · 15 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAnaChannelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ENVIRONMENT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ENVIRONMENT-MIB::hwAnaChannelTable' 
Information table of the analog parameters monitored. 
The indexes of this table are hwEnvEmuIndex or hwAnaChannelIndex.
hwEnvEmuIndex is the index of the environment monitoring unit, 
and hwAnaChannelIndex is the index of the analog parameter that 
is monitored by a monitoring unit.
hwAnaChannelEntry row .1.3.6.1.4.1.2011.6.1.1.2.1
Information table of the analog parameters monitored.
The indexes of this entry are hwEnvEmuIndex or hwAnaChannelIndex.
hwEnvEmuIndex is the index of the environment monitoring unit,
and hwAnaChannelIndex is the index…
Indexes
Column Syntax OID
hwAnaChannelIndex
Index of the analog parameter that is monitored by the monitoring unit.
Range: 0 - 255
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.6.1.1.2.1.1
hwAnaName
Name of the analog parameter that is monitored by a monitoring unit.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.6.1.1.2.1.2
hwAnaType
This object indicates the type of the sensor that is used to test the
Analog parameter.
Options:
1.invalid(-1) -there is no valid sensor
2.voltage(1) -voltage sensor currently
3.electriccurrent(2) -electric current s…
Enumerationr/w
Enumerated Values:
-1invalid
1voltage
2electriccurrent
 .1.3.6.1.4.1.2011.6.1.1.2.1.3
hwAnaMeasureType
This object indicates the unit of the analog parameter that is tested.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.6.1.1.2.1.4
hwAnaWorkHigh
High limit of the analog normal work
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.2.1.5
hwAnaWorkLow
Low limit of the analog normal work
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.2.1.6
hwAnaAlmHigh
High limit of the analog alarm. The alarm is produced
when the measurement value is higher than this value
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.2.1.7
hwAnaAlmLow
The low limit of the analog alarm. The alarm is produced
when the measurement value is lower than this value.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.2.1.8
hwAnaCurrentValue
The actual measurement value of the present analog.
Unit: milli
invalid: 0x7fffffff
milliSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.2.1.9
hwAnaAlarmState
The status of the present monitored.
Options:
1.normal(1) -indicates that the measurement value is lower than the set high
limit of the alarm, and higher than the low limit
2.overWorkHigh(…
Enumeration
Enumerated Values:
-1invalid
1normal
2overWorkHigh
3belowWorkLow
4abnormal
 .1.3.6.1.4.1.2011.6.1.1.2.1.10
hwAnaRowStatus
RowStatus standard operation. The values 1 and 2 are supported currently.
1 indicates the activation status, and 2 indicates the non-activation status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.6.1.1.2.1.11
hwAnaAlarmID
Analog alarm definition.
Options:
1.temperature(1) -temperature alarm
2.humidity(2) -humidity alarm
3.voltage(3) -voltage alarm
4.electriccurrent(4) -electric current a…
Enumerationr/w
Enumerated Values:
1temperature
2humidity
3voltage
4electriccurrent
100userDefinedAlarm0
101userDefinedAlarm1
102userDefinedAlarm2
103userDefinedAlarm3
104userDefinedAlarm4
105userDefinedAlarm5
106userDefinedAlarm6
107userDefinedAlarm7
108userDefinedAlarm8
109userDefinedAlarm9
110userDefinedAlarm10
111userDefinedAlarm11
112userDefinedAlarm12
113userDefinedAlarm13
114userDefinedAlarm14
115userDefinedAlarm15
65535default
 .1.3.6.1.4.1.2011.6.1.1.2.1.12
hwAnaMonitorState
analog alarm(temperature,humidity,battery temperature) monitor flag value,
The value 1 enable monitor, value 2 disable monitor.
Enumerationr/w
Enumerated Values:
-1invalid
1enable
2disable
 .1.3.6.1.4.1.2011.6.1.1.2.1.13
hwAnaSignalHigh
High limit of the analog signal.
invalid: 0x7fffffff.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.2.1.14
hwAnaSignalLow
Low limit of the analog signal.
invalid: 0x7fffffff.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.2.1.15

hwDigChannelTable

table
.1.3.6.1.4.1.2011.6.1.1.3 · 1 row entry · 7 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwDigChannelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ENVIRONMENT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ENVIRONMENT-MIB::hwDigChannelTable' 
Information table of the digital parameters monitored. 
The indexes of this table are hwEnvEmuIndex and hwDigChannelIndex.
hwEnvEmuIndex is the index of the environment monitoring unit, 
and hwDigChannelIndex is the index of the digital parameter that
is monitored by a monitoring unit.
hwDigChannelEntry row .1.3.6.1.4.1.2011.6.1.1.3.1
Information table of the digital parameters monitored.
The indexes of this entry are hwEnvEmuIndex and hwDigChannelIndex.
hwEnvEmuIndex is the index of the environment monitoring unit,
and hwDigChannelIndex is the ind…
Indexes
Column Syntax OID
hwDigChannelIndex
Index of the digital parameter that is monitored by a monitoring unit.
Range: 0 - 255
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.6.1.1.3.1.1
hwDigChannelName
Name of the digital parameter that is monitored by a monitoring unit.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.6.1.1.3.1.2
hwAlmCondition
Alarm conditions.
Options:
1.lowLevelAlarm(1) -refers to the alarm produced when the digital sensor detects the low level
2.highLevelAlarm(2) -refers to the alarm produced when the digital sensor detects the high leve…
Enumerationr/w
Enumerated Values:
-1invalid
1lowLevelAlarm
2highLevelAlarm
 .1.3.6.1.4.1.2011.6.1.1.3.1.3
hwDigChannelState
The status of the present monitored digital sensor
Options:
1.normal(1) -indicates that the digital sensor works normally
2.alarm(2) -indicates that the digital sensor produces the alarm signal
3.invalid(-1) -ind…
Enumeration
Enumerated Values:
-1invalid
1normal
2alarm
 .1.3.6.1.4.1.2011.6.1.1.3.1.4
hwDigRowStatus
RowStatus standard operation. The values 1 and 2 are supported currently.
1 indicates the activation status, and 2 indicates the non-activation status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.6.1.1.3.1.5
hwDigAlarmID
Digital alarm definition.
Options:
1.acvoltage(1) -ac voltage alarm
2.acswitch(2) -ac switch alarm
3.batteryvoltage(3) -battery voltage alarm
4…
Enumerationr/w
Enumerated Values:
1acvoltage
2acswitch
3batteryvoltage
4batteryfuse
5loadfuse
6rectifier
7dcpower
8cupboarddoor
9roomdoor
10window
11thief
12wiring
13fan
14fire
15fog
16water
17diesel
18smell
19aircondition
20arrester
21dcvoltage
22outputswitch
23hardFault
100userDefinedAlarm0
101userDefinedAlarm1
102userDefinedAlarm2
103userDefinedAlarm3
104userDefinedAlarm4
105userDefinedAlarm5
106userDefinedAlarm6
107userDefinedAlarm7
108userDefinedAlarm8
109userDefinedAlarm9
110userDefinedAlarm10
111userDefinedAlarm11
112userDefinedAlarm12
113userDefinedAlarm13
114userDefinedAlarm14
115userDefinedAlarm15
116userDefinedAlarm16
117userDefinedAlarm17
118userDefinedAlarm18
119userDefinedAlarm19
120userDefinedAlarm20
121userDefinedAlarm21
122userDefinedAlarm22
123userDefinedAlarm23
124userDefinedAlarm24
125userDefinedAlarm25
126userDefinedAlarm26
127userDefinedAlarm27
128userDefinedAlarm28
129userDefinedAlarm29
130userDefinedAlarm30
131userDefinedAlarm31
65535default
 .1.3.6.1.4.1.2011.6.1.1.3.1.6
hwDigMonitorState
default digital alarm(Door,Water,Smoke,Wiring) monitor flag value,
The value 1 enable monitor, value 2 disable monitor.
Enumerationr/w
Enumerated Values:
-1invalid
1enable
2disable
 .1.3.6.1.4.1.2011.6.1.1.3.1.7

hwControlOutTable

table
.1.3.6.1.4.1.2011.6.1.1.4 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwControlOutTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ENVIRONMENT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ENVIRONMENT-MIB::hwControlOutTable' 
Monitored digital out table.
This table indicates information about whether digital parameter is monitored.
The indexes of this table are hwEnvEmuIndex and hwControlOutIndex. 
hwEnvEmuIndex is the index of the monitoring unit, 
and hwControlOutIndex is the index of the digital out table monitored in the monitoring unit.
hwControlOutEntry row .1.3.6.1.4.1.2011.6.1.1.4.1
Monitored digital out table.
This table indicates information about whether digital parameter is monitored.
The indexes of this entry are hwEnvEmuIndex and hwControlOutIndex.
hwEnvEmuIndex is the index of the monitorin…
Indexes
Column Syntax OID
hwControlOutIndex
Index of the digital out table monitored in the monitoring unit
Range: 0 - 255
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.6.1.1.4.1.1
hwControlOutName
Name of the monitored digital out table
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.6.1.1.4.1.2
hwControlOutAdminStatus
Control Out administration: executes the on/off operation.
Options:
1. on(1) - trun on
2. off(2) - trun off
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.2011.6.1.1.4.1.3
hwControlOutRowStatus
RowStatus standard operation. The values 1 and 2 are supported currently.
1 indicates the activation status, and 2 indicates the non-activation status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.6.1.1.4.1.4

hwFanTable

table
.1.3.6.1.4.1.2011.6.1.1.5 · 1 row entry · 10 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwFanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ENVIRONMENT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ENVIRONMENT-MIB::hwFanTable' 
Information table of fan monitoring. 
The index of this table is hwEnvEmuIndex that comes from hwEnvironmentInfoTable. 
hwEnvEmuIndex is the index of the monitoring unit whose monitoring type is fan.
hwFanEntry row .1.3.6.1.4.1.2011.6.1.1.5.1
Information table of fan monitoring.
The index of this entry is hwEnvEmuIndex that comes from hwEnvironmentInfoTable.
hwEnvEmuIndex is the index of the monitoring unit whose monitoring type is fan.
Indexes
Column Syntax OID
hwFanName
Fan name
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.6.1.1.5.1.1
hwFanControlMode
The fan control modes of the fan frame.
Options:
1.manual(1) -indicates that the fan is always on, and the fan speed can be manually adjusted
2.emuAuto(2) -indicates that the fan is in the automatic mode, …
Enumerationr/w
Enumerated Values:
-1invalid
1manual
2emuAuto
3fixed
4mainboardAuto
 .1.3.6.1.4.1.2011.6.1.1.5.1.2
hwFanControlState
For ESC fan, all should be checked to turn on the fan,
while all should not be checked to turn off the fan.
Options:
1.fan1(0) -indicates that the first fan needs to be opened
2.fan2(1) -indicates that the second fan n…
Bitsr/w
Enumerated Values:
0fan1
1fan2
2fan3
3fan4
4fan5
5fan6
 .1.3.6.1.4.1.2011.6.1.1.5.1.3
hwESCFanTempAutoOn
The fan temperature set, in unit of centigrade.
The MIB object only functions for the fan monitoring board of ESC and
is not applicable to the type of fan monitoring board.
Only when the fan control mode of the fan fr…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.5.1.4
hwESCFanTempAutoOff
The fan temperature set, in unit of centigrade.
The MIB object only functions for the fan monitoring board of ESC and
is not applicable to the type of fan monitoring board.
Only when the fan control mode of the fan f…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.5.1.5
hwFanRowStatus
RowStatus standard operation.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.6.1.1.5.1.6
hwCurrentTemp
The present temperature value
Unit: 0.01 degree
invalid: 0x7fffffff
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.5.1.7
hwFanSpeedMode
The adjusting rotation mode of the fan.
Options:
1.continue(1) -continuous control
2.discontinue(2) -discrete control
3.percent(3) -duty ratio control
4.invalid(-1) -indicates that the device can not get the v…
Enumerationr/w
Enumerated Values:
-1invalid
1continue
2discontinue
3percent
 .1.3.6.1.4.1.2011.6.1.1.5.1.8
hwFanSpeed
When hwFanSpeedMode is the continue mode, 0 indicates the present wind speed +1, while 1 indicates the present wind speed -1.
When hwFanSpeedMode is discontinuous, 0 indicates fixed high speed, while 1 indicates fixed l…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.5.1.9
hwFanTypeDescription
Fan Type Description.
Invalid: null string.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.6.1.1.5.1.10

hwTcuTable

table
.1.3.6.1.4.1.2011.6.1.1.6 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwTcuTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ENVIRONMENT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ENVIRONMENT-MIB::hwTcuTable' 
Information table of temperature control unit. 
The index of this table is hwEnvEmuIndex that comes from hwEnvironmentInfoTable. 
hwEnvEmuIndex is the index of the monitoring unit whose monitoring type is temperature control unit.
hwTcuEntry row .1.3.6.1.4.1.2011.6.1.1.6.1
Information table of temperature control unit.
The index of this entry is hwEnvEmuIndex that comes from hwEnvironmentInfoTable.
hwEnvEmuIndex is the index of the monitoring unit whose monitoring type is temperature co…
Indexes
Column Syntax OID
hwTcuHeatExchangerType
Heat Exchanger Type Description.
Invalid: null string.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.6.1.1.6.1.1
hwTcuExternalFanRev
The rev of Heat Exchanger outer fan, in unit of RMP (rotate per minite),
invalid(-1)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.6.1.2
hwTcuInternalFanRev
The rev of Heat Exchanger inner fan, in unit of RMP (rotate per minite),
invalid(-1)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.6.1.3
hwTcuStartHeatTemp
The temperature of Heat Exchanger starts to heat up, in unit of Celsius.
default: 5
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.6.1.4
hwTcuStopHeatTemp
The temperature of Heat Exchanger stops heating, in unit of Celsius.
default: 25
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.6.1.5

hwOpticalNodeTable

table
.1.3.6.1.4.1.2011.6.1.1.7 · 1 row entry · 79 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwOpticalNodeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ENVIRONMENT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ENVIRONMENT-MIB::hwOpticalNodeTable' 
Information table of optical node unit. 
The index of this table is  hwFrameIndex that comes from hwFrameTable. 
hwFrameIndex is the index of the optical node unit whose optical node type is optical node unit.
hwOpticalNodeEntry row .1.3.6.1.4.1.2011.6.1.1.7.1
Information table of optical node unit.
interface optical node config mode.
Indexes
Column Syntax OID
hwONCOMState
The state of Optical node
The Optical node can be used only when it is online.
Options:
1.online(1) - indicates that Optical state is online
2.offline(2) - indicates that Optical state is offline
3.shutdown(3) -…
Enumeration
Enumerated Values:
1online
2offline
3shutdown
 .1.3.6.1.4.1.2011.6.1.1.7.1.1
hwONModelNumber
The model number of Optical node
invalid(zero-length)
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.6.1.1.7.1.2
hwONHardwareVer
The hard version of Optical node
invalid(zero-length)
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.6.1.1.7.1.3
hwONSoftwareVer
The software version of Optical node
invalid(zero-length)
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.6.1.1.7.1.4
hwONProductDate
The product date of Optical node
field octets contents range
----- ------ -------- -----
1 1-4 year 0..65536
2 5-6 month 1…
OctetString
Constraints:
range: 8-8
range: 0-0
 .1.3.6.1.4.1.2011.6.1.1.7.1.5
hwOROpticalPowerValue
This is the power of the only channel for the single-channel optical receiver.
This is the power of channel 0 for the dual-channel optical receiver.
Its unit is dbm,its real accuracy is 0.01.
SNMP uses it which has been…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.6
hwOROpticalPowerAlarmState
This is the power alarm state of the only channel for the single-channel optical receiver.
This is the power alarm state of channel 0 for the dual-channel optical receiver.
The Optical receiver can be used only when it…
Enumeration
Enumerated Values:
1normal
2low
3high
 .1.3.6.1.4.1.2011.6.1.1.7.1.7
hwOROpticalPowerLowThreshold
This is the low power threshold of the only channel for the single-channel optical receiver.
This is the low power threshold of channel 0 for the dual-channel optical receiver.
Its unit is dbm,its real accuracy is 0.01…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.8
hwOROpticalPowerHighThreshold
This is the high power threshold of the only channel for the single-channel optical receiver.
This is the high power threshold of channel 0 for the dual-channel optical receiver.
Its unit is dbm,its real accuracy is 0.…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.9
hwOROpticalAGCStart
This is the start value of the AGC range of the only channel for the single-channel optical receiver.
This is the start value of the AGC range of channel 0 for the dual-channel optical receiver.
Its unit is dBm,its rea…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.10
hwORRFPowerValue
The RF power value of Optical receiver. When the dual-channel optical receiver works in combination mode, this leaf indicates the RF power of channel 0.
Its unit is dBmV,its real accuracy is 0.1.
SNMP uses it which has …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.11
hwORRFPowerAlarmState
The RF power alarm state of Optical receiver. When the dual-channel optical receiver works in combination mode, this leaf indicates the RF power alarm status of channel 0.
The Optical receiver can be used only when it i…
Enumeration
Enumerated Values:
1normal
2low
3high
 .1.3.6.1.4.1.2011.6.1.1.7.1.12
hwORRFPowerLowThreshold
The RF power low threshold of Optical receiver
Its unit is dBmV,its real accuracy is 0.1.
SNMP uses it which has been enlarged 10 by host.
user uses it which has been lessened 10 by SNMP.
Lower threshold for RF alarms(o…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.13
hwORRFPowerHighThreshold
The RF power high threshold of Optical receiver
Its unit is dBmV,its real accuracy is 0.1.
SNMP uses it which has been enlarged 10 by host.
user uses it which has been lessened 10 by SNMP.
Its real range is -15dBmV~70dB…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.14
hwORRFAttValue
The RF ATT value of Optical receiver
Its unit is db.
Its range is 0db~10db.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.15
hwORRFSwitch
The RF switch of Optical receiver
The Optical receiver can be used only when it is on.
Options:
1.off(1) - indicates that RF Switch state is off
2.on(2) - indicates that RF Switch state is on
Enumerationr/w
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.2011.6.1.1.7.1.16
hwONBarcode
The barcode of Optical node
invalid(zero-length)
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.6.1.1.7.1.17
hwONCurrentInputVoltage1
The current input voltage1 of Optical node.
Its unit is V,its real accuracy is 0.1.
SNMP uses it which has been enlarged 10 by host.
user uses it which has been lessened 10 by SNMP.
The current input voltage1 is positiv…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.18
hwONCurrentInputVoltage2
The current input voltage2 of Optical node.
Its unit is V,its real accuracy is 0.1.
SNMP uses it which has been enlarged 10 by host.
user uses it which has been lessened 10 by SNMP.
The current input voltage2 is positiv…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.19
hwORAGCRange
This is the AGC range of the only channel for the single-channel optical receiver.
This is the AGC range of channel 0 for the dual-channel optical receiver.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.6.1.1.7.1.20
hwOTOpticalOutputPowerValue
This is the power of the only channel for the single-channel optical transmitter.
This is the power of channel 0 for the dual-channel optical transmitter.
Its unit is 0.01dbm.
invalid: 0x7fffffff.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.21
hwOTOpticalOutputPowerAlarmState
This is the power alarm state of the only channel for the single-channel optical transmitter.
This is the power alarm state of channel 0 for the dual-channel optical transmitter.
The optical transmitter can be used only…
Enumeration
Enumerated Values:
1normal
2low
3high
 .1.3.6.1.4.1.2011.6.1.1.7.1.22
hwOTOpticalOutputPowerLowThreshold
This is the low power threshold of the only channel for the single-channel optical transmitter.
This is the low power threshold of channel 0 for the dual-channel optical transmitter.
The alarm is produced when the opti…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.23
hwOTOpticalOutputPowerHighThreshold
This is the high power threshold of the only channel for the single-channel optical transmitter.
This is the high power threshold of channel 0 for the dual-channel optical transmitter.
The alarm is produced when th…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.24
hwOTBiasValue
This is the bias current value of the only channel for the single-channel optical transmitter.
This is the bias current value of channel 0 for the dual-channel optical transmitter.
Its unit is mA,its normal range is 1mA…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.25
hwOTBiasAlarmState
This is the bias current alarm state of the only channel for the single-channel optical transmitter.
This is the bias current alarm state of channel 0 for the dual-channel optical transmitter.
The optical transmitter c…
Enumeration
Enumerated Values:
1normal
2low
3high
 .1.3.6.1.4.1.2011.6.1.1.7.1.26
hwOTBiasLowThreshold
This is the low bias current threshold of the only channel for the single-channel optical transmitter.
This is the low bias current threshold of channel 0 for the dual-channel optical transmitter.
The alarm is prod…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.27
hwOTBiasHighThreshold
This is the high bias current threshold of the only channel for the single-channel optical transmitter.
This is the high bias current threshold of channel 0 for the dual-channel optical transmitter.
The alarm is produ…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.28
hwOTWaveLength
The wave length of Optical transmitter.
Its unit is nm.
Its value is 1310nm or 1550nm or 1610nm.
invalid(-1)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.29
hwOROpticalWorkMode
The protect-switch channel policy of dual-channel optical receiver.
Options:
1.force-channel0(1) - Force channel 0 as working channel, and forbid switching channel.
2.force-channel1(2) - Force channel 1 as workin…
Enumerationr/w
Enumerated Values:
1forcechannel0
2forcechannel1
3preferchannel0
4preferchannel1
5combiner
 .1.3.6.1.4.1.2011.6.1.1.7.1.30
hwOROpticalActiveChannel
The working channel of dual-channel optical receiver.
invalid(-1).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.31
hwOROpticalCH1PowerValue
This is the power of channel 1 for the dual-channel optical receiver.
Its unit is dbm,its real accuracy is 0.01.
SNMP uses it which has been enlarged 100 by host.
user uses it which has been lessened 100 by SNMP.
invali…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.32
hwOROpticalCH1PowerAlarmState
This is the power alarm state of channel 1 for the dual-channel optical receiver.
The optical receiver can be used only when it is normal.
Options:
1.normal(1) - indicates that Optical power alarm state is normal
2.…
Enumeration
Enumerated Values:
1normal
2low
3high
 .1.3.6.1.4.1.2011.6.1.1.7.1.33
hwOROpticalCH1PowerLowThreshold
This is the low power threshold of channel 1 for the dual-channel optical receiver.
Its unit is dbm,its real accuracy is 0.01.
SNMP uses it which has been enlarged 100 by host.
user uses it which has been lessened 100 b…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.34
hwOROpticalCH1PowerHighThreshold
This is the high power threshold of channel 1 for the dual-channel optical receiver.
Its unit is dbm,its real accuracy is 0.01.
SNMP uses it which has been enlarged 100 by host.
user uses it which has been lessened 100 …
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.35
hwOROpticalCH1AGCStart
This is the start value of the AGC range of channel 1 for the dual-channel optical receiver.
Its unit is dBm,its real range is -4dBm~3dBm.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.36
hwORAGCCH1Range
This is the AGC range of channel 1 for the dual-channel optical receiver.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.6.1.1.7.1.37
hwORType
The optical type of optical node.
Options:
1.optical-receiver(1)
2.optical-receiver/optical-transmitter(2)
3.dual-channel optical-receiver(3)
4.optical-receiver/dual-channel optical-transmitter(4)
5.dual-channel optic…
Enumeration
Enumerated Values:
1opticalreceiver
2opticalreceivertransmitter
3dualchannelopticalreceiver
4opticalreceiverdualchannelopticaltransmitter
5dualchannelopticalreceiverdualchannelopticaltransmitter
6dualchannelopticalreceiveropticaltransmitter
7opticaltransmitter
8dualchannelopticaltransmitter
99invalid
 .1.3.6.1.4.1.2011.6.1.1.7.1.38
hwOTOpticalOutputCH1PowerValue
This is the power of channel 1 for the dual-channel optical transmitter.
Its unit is dbm,its real accuracy is 0.01.
SNMP uses it which has been enlarged 100 by host.
user uses it which has been lessened 100 by SNMP.
in…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.39
hwOTOpticalOutputCH1PowerAlarmState
This is the power alarm state of channel 1 for the dual-channel optical transmitter.
The optical transmitter can be used only when it is normal.
Options:
1.normal(1) - indicates that Optical power alarm state is nor…
Enumeration
Enumerated Values:
1normal
2low
3high
 .1.3.6.1.4.1.2011.6.1.1.7.1.40
hwOTOpticalOutputCH1PowerLowThreshold
This is the low power threshold of channel 1 for the dual-channel optical transmitter.
Its unit is dbm,its real accuracy is 0.01.
SNMP uses it which has been enlarged 100 by host.
user uses it which has been lessened 10…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.41
hwOTOpticalOutputCH1PowerHighThreshold
This is the high power threshold of channel 1 for the dual-channel optical transmitter.
Its unit is dbm,its real accuracy is 0.01.
SNMP uses it which has been enlarged 100 by host.
user uses it which has been lessened 1…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.42
hwOTCH1BiasValue
This is the bias current value of channel 1 for the dual-channel optical transmitter.
Its unit is mA,its normal range is 1mA~100mA.
invalid(-1)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.43
hwOTCH1BiasAlarmState
This is the bias current alarm state of channel 1 for the dual-channel optical transmitter.
The optical transmitter can be used only when it is normal.
Options:
1.normal(1) - The bias current alarm state is normal w…
Enumeration
Enumerated Values:
1normal
2low
3high
 .1.3.6.1.4.1.2011.6.1.1.7.1.44
hwOTCH1BiasLowThreshold
This is the low bias current threshold of channel 1 for the dual-channel optical transmitter.
The alarm is produced when the bias current value is lower than this value.
Its unit is mA.
Its range is 1mA~100mA,default va…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.45
hwOTCH1BiasHighThreshold
This is the high bias current threshold of channel 1 for the dual-channel optical transmitter.
The alarm is produced when the bias current value is higher than this value.
Its unit is mA.
Its range is 1mA~100mA,default …
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.46
hwORCfgChannel0AGCMode
Indicates the configuration information about the AGC gain on channel 0 for the optical receiver.
Options:
1.off(2) - indicates that AGC gain is off
2.minus6to2dBm(3) - indicates that the range of AG…
Enumerationr/w
Enumerated Values:
2off
3minus6to2dBm
4minus4to2dBm
5minus2to2dBm
 .1.3.6.1.4.1.2011.6.1.1.7.1.47
hwORCfgChannel1AGCMode
Indicates the configuration information about the AGC gain on channel 1 for the optical receiver.
Options:
1.off(2) - indicates that AGC gain is off
2.minus6to2dBm(3) - indicates that the range of AG…
Enumerationr/w
Enumerated Values:
2off
3minus6to2dBm
4minus4to2dBm
5minus2to2dBm
 .1.3.6.1.4.1.2011.6.1.1.7.1.48
hwORRuninfoChannel0AGCMode
Indicates the running information about the AGC gain on channel 0 for the optical receiver.
Options:
1.invalid(1) - indicates that AGC gain is not supported for the optical receiver
…
Enumeration
Enumerated Values:
1invalid
2off
3minus6to2dBm
4minus4to2dBm
5minus2to2dBm
 .1.3.6.1.4.1.2011.6.1.1.7.1.49
hwORRuninfoChannel1AGCMode
Indicates the running information about the AGC gain on channel 1 for the optical receiver.
Options:
1.invalid(1) - indicates that AGC gain is not supported for the optical receiver
…
Enumeration
Enumerated Values:
1invalid
2off
3minus6to2dBm
4minus4to2dBm
5minus2to2dBm
 .1.3.6.1.4.1.2011.6.1.1.7.1.50
hwORRFCH1PowerValue
When the dual-channel optical receiver works in combination mode, this leaf takes effect and it indicates the RF power of channel 1.
Its unit is dBmV,its real accuracy is 0.1.
SNMP uses it which has been enlarged 10 by…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.51
hwORRFCH1PowerAlarmState
When the dual-channel optical receiver works in combination mode, this leaf takes effect and it indicates the RF power alarm status of channel 1.
The Optical receiver can be used only when it is normal.
Options:
1.n…
Enumeration
Enumerated Values:
1normal
2low
3high
 .1.3.6.1.4.1.2011.6.1.1.7.1.52
hwOTCH1WaveLength
The wave length of channel 1 for the Optical transmitter .
Its unit is nm.
Its value is 1310nm or 1550nm or 1610nm.
invalid(-1)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.53
hwOTCfgOpticalWorkMode
Indicates the configuration information about the work mode for the optical transmitter.
Options:
2.singleSGsingleTX(2) - indicates the working mode is single SG(service group), single TX(optical transmitter)
3.si…
Enumerationr/w
Enumerated Values:
2singleSGsingleTX
3singleSGdoubleTX
4doubleSGdoubleTX
 .1.3.6.1.4.1.2011.6.1.1.7.1.54
hwOTRuninfoOpticalWorkMode
Indicates the running information about the work mode for the optical transmitter.
1.invalid(1) - indicates the working mode is not supported for the optical transmitter
or the optica…
Enumeration
Enumerated Values:
1invalid
2singleSGsingleTX
3singleSGdoubleTX
4doubleSGdoubleTX
 .1.3.6.1.4.1.2011.6.1.1.7.1.55
hwOTCH0RFAttValue
This is the rf attenuation current value of channel 0 for the dual-channel optical transmitter.
Its unit is dB,its real accuracy is 0.1.
SNMP uses it which has been enlarged 10 by host.
user uses it which has been lesse…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.56
hwOTCH1RFAttValue
This is the rf attenuation current value of channel 1 for the dual-channel optical transmitter.
Its unit is dB,its real accuracy is 0.1.
SNMP uses it which has been enlarged 10 by host.
user uses it which has been lesse…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.57
hwORCh0OnlineState
The state of channel 0 for the optical receiver.
Options:
1.normal(1) - indicates that optical receiver channel 0 is normal
2.offline(2) - indicates that optical receiver channel 0 is offline
3.fault(3) - in…
Enumeration
Enumerated Values:
1normal
2offline
3fault
4config
5autoload
6manualshutdown
7mismatch
 .1.3.6.1.4.1.2011.6.1.1.7.1.58
hwORCh1OnlineState
The state of channel 1 for the optical receiver.
Options:
1.normal(1) - indicates that optical receiver channel 1 is normal
2.offline(2) - indicates that optical receiver channel 1 is offline
3.fault(3) - in…
Enumeration
Enumerated Values:
1normal
2offline
3fault
4config
5autoload
6manualshutdown
7mismatch
 .1.3.6.1.4.1.2011.6.1.1.7.1.59
hwOTCh0OnlineState
The state of channel 0 for the optical transmitter.
Options:
1.normal(1) - indicates that optical transmitter channel 0 is normal
2.offline(2) - indicates that optical transmitter channel 0 is offline
3.fault(3)…
Enumeration
Enumerated Values:
1normal
2offline
3fault
4config
5autoload
6manualshutdown
7mismatch
 .1.3.6.1.4.1.2011.6.1.1.7.1.60
hwOTCh1OnlineState
The state of channel 1 for the optical transmitter.
Options:
1.normal(1) - indicates that optical transmitter channel 1 is normal
2.offline(2) - indicates that optical transmitter channel 1 is offline
3.fault(3)…
Enumeration
Enumerated Values:
1normal
2offline
3fault
4config
5autoload
6manualshutdown
7mismatch
 .1.3.6.1.4.1.2011.6.1.1.7.1.61
hwONCfgOpticalWorkMode
Indicates the configuration information about the work mode for the optical node.
Options:
1.invalid(1) - indicates the working mode is not supported for the optical node
or the optical …
Enumerationr/w
Enumerated Values:
1invalid
2singleRXdoubleTX
3doubleRXsingleTX
 .1.3.6.1.4.1.2011.6.1.1.7.1.62
hwONRuninfoOpticalWorkMode
Indicates the configuration information about the work mode for the optical node.
Options:
1.invalid(1) - indicates the working mode is not supported for the optical node
or the optical …
Enumeration
Enumerated Values:
1invalid
2singleRXdoubleTX
3doubleRXsingleTX
 .1.3.6.1.4.1.2011.6.1.1.7.1.63
hwOTCh0RuninfoOpticalLowPassFilter
The low pass filter of channel 0 for the Optical transmitter .
Its unit is MHz.
Its value is 42MHz or 65MHz or 85MHz or 204MHz.
invalid(-1)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.64
hwOTCh1RuninfoOpticalLowPassFilter
The low pass filter of channel 1 for the Optical transmitter .
Its unit is MHz.
Its value is 42MHz or 65MHz or 85MHz or 204MHz.
invalid(-1)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.65
hwONSmartCapability
This MIB node is used to query the function of the optical node, which is represented by bits.
Functions of each bit are as follows:
1: setOTCHRFAttValue(0) - indicates whether the RF attenuation of the optical trans…
Bits
Enumerated Values:
0setOTCHRFAttValue
1setONCfgOpticalWorkMode
2setOTCfgOpticalWorkMode
 .1.3.6.1.4.1.2011.6.1.1.7.1.66
hwORRFPowerChangeThreshold
The RF power change threshold of Optical receiver
Its unit is dBmV,its real accuracy is 0.1.
SNMP uses it which has been enlarged 10 by host.
user uses it which has been lessened 10 by SNMP.
Its real range i…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.67
hwORCHN0RFPowerReferenceValue
The RF power reference value of Optical receiver. When the dual-channel optical receiver works in combination mode, this leaf indicates the RF power reference value of channel 0.
Its unit is dBmV,its real accuracy…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.68
hwORCHN0RFPowerChangeValue
The RF power change value of Optical receiver. When the dual-channel optical receiver works in combination mode, this leaf indicates the RF power change value of channel 0.
Its unit is dBmV,its real accuracy is 0.…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.69
hwORCHN1RFPowerReferenceValue
When the dual-channel optical receiver works in combination mode, this leaf takes effect and it indicates the RF power reference value of channel 1.
Its unit is dBmV,its real accuracy is 0.1.
SNMP uses it which…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.70
hwORCHN1RFPowerChangeValue
When the dual-channel optical receiver works in combination mode, this leaf takes effect and it indicates the RF power change value of channel 1.
Its unit is dBmV,its real accuracy is 0.1.
SNMP uses it which ha…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.71
hwORCH0CurrentInputVoltage1
The RX CH0 current input voltage1 of Optical node.
Its unit is V,its real accuracy is 0.1.
SNMP uses it which has been enlarged 10 by host.
user uses it which has been lessened 10 by SNMP.
The RX CH0 current input volta…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.72
hwORCH0CurrentInputVoltage2
The RX CH0 current input voltage2 of Optical node.
Its unit is V,its real accuracy is 0.1.
SNMP uses it which has been enlarged 10 by host.
user uses it which has been lessened 10 by SNMP.
The RX CH0 current input volta…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.73
hwORCH1CurrentInputVoltage1
The RX CH1 current input voltage1 of Optical node.
Its unit is V,its real accuracy is 0.1.
SNMP uses it which has been enlarged 10 by host.
user uses it which has been lessened 10 by SNMP.
The RX CH1 current input volta…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.74
hwORCH1CurrentInputVoltage2
The RX CH1 current input voltage2 of Optical node.
Its unit is V,its real accuracy is 0.1.
SNMP uses it which has been enlarged 10 by host.
user uses it which has been lessened 10 by SNMP.
The RX CH1 current input volta…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.75
hwOTCH0CurrentInputVoltage1
The TX CH0 current input voltage1 of Optical node.
Its unit is V,its real accuracy is 0.1.
SNMP uses it which has been enlarged 10 by host.
user uses it which has been lessened 10 by SNMP.
The TX CH0 current input volta…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.76
hwOTCH0CurrentInputVoltage2
The TX CH0 current input voltage2 of Optical node.
Its unit is V,its real accuracy is 0.1.
SNMP uses it which has been enlarged 10 by host.
user uses it which has been lessened 10 by SNMP.
The TX CH0 current input volta…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.77
hwOTCH1CurrentInputVoltage1
The TX CH1 current input voltage1 of Optical node.
Its unit is V,its real accuracy is 0.1.
SNMP uses it which has been enlarged 10 by host.
user uses it which has been lessened 10 by SNMP.
The TX CH1 current input volta…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.78
hwOTCH1CurrentInputVoltage2
The TX CH1 current input voltage2 of Optical node.
Its unit is V,its real accuracy is 0.1.
SNMP uses it which has been enlarged 10 by host.
user uses it which has been lessened 10 by SNMP.
The TX CH1 current input volta…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.7.1.79

hwOpticalPowerTable

table
.1.3.6.1.4.1.2011.6.1.1.8 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwOpticalPowerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ENVIRONMENT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ENVIRONMENT-MIB::hwOpticalPowerTable' 
The indexes of this entry are hwFrameIndex and hwOpticalChnIndex.
The index of this table is hwFrameIndex that comes from hwFrameTable.
hwOpticalPowerEntry row .1.3.6.1.4.1.2011.6.1.1.8.1
The indexes of this entry are hwFrameIndex and hwOpticalChnIndex.
The index of this table is hwFrameIndex that comes from hwFrameTable.
Indexes
Column Syntax OID
hwOpticalChnIndex
The channel id of optical node.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.8.1.1
hwOpticalPowerValue
The optical power value of optical node
Its unit is dbm,its real accuracy is 0.01.
OctetString .1.3.6.1.4.1.2011.6.1.1.8.1.2
hwOpticalBiasValue
The optical Bias value of optical node
Its unit is mA.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.8.1.3

hwFanUnitTable

table
.1.3.6.1.4.1.2011.6.1.1.9 · 1 row entry · 2 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwFanUnitTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ENVIRONMENT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ENVIRONMENT-MIB::hwFanUnitTable' 
Fan unit table. 
The index of this table are hwEnvEmuIndex that comes from hwEnvironmentInfoTable and hwFanUnitIndex. 
hwEnvEmuIndex is the index of the monitoring unit whose monitoring type is temperature control unit,
and hwFanUnitIndex is the index of fan unit that is monitored by the fan.
hwFanUnitEntry row .1.3.6.1.4.1.2011.6.1.1.9.1
Fan unit table.
The index of this table are hwEnvEmuIndex that comes from hwEnvironmentInfoTable and hwFanUnitIndex.
hwEnvEmuIndex is the index of the monitoring unit whose monitoring type is temperature control unit,…
Indexes
Column Syntax OID
hwFanUnitIndex
The index of fan unit.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.9.1.1
hwFanUnitSpeed
The speed of fan unit
Its unit is round per minute,
invalid: -1.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.9.1.2

hwSirenTable

table
.1.3.6.1.4.1.2011.6.1.1.10 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwSirenTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ENVIRONMENT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ENVIRONMENT-MIB::hwSirenTable' 
siren config table
hwSirenEntry row .1.3.6.1.4.1.2011.6.1.1.10.1
siren config table
Indexes
Column Syntax OID
hwSirenSwitch
enabe and disable the siren.
1:enable
2:disable
-1:invalid
Enumerationr/w
Enumerated Values:
-1invalid
1enable
2disable
 .1.3.6.1.4.1.2011.6.1.1.10.1.1
hwSirenHowlerDelay
the howler-delay of the siren.The default value is 30,the unit is minute.
invalid: -1.
Integer32r/w
Constraints:
range: 0-1440
 .1.3.6.1.4.1.2011.6.1.1.10.1.2
hwSirenHowlerDuration
the howler-duration of the siren.The default value is 3,the unit is minute.
invalid: -1.
Integer32r/w
Constraints:
range: 0-1440
 .1.3.6.1.4.1.2011.6.1.1.10.1.3
hwSirenSlientDuration
the slient-duration of the siren.The default value is 60,the unit is minute.
invalid(-1).
Integer32r/w
Constraints:
range: 0-1440
 .1.3.6.1.4.1.2011.6.1.1.10.1.4

hwElockTable

table
.1.3.6.1.4.1.2011.6.1.1.11 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwElockTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ENVIRONMENT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ENVIRONMENT-MIB::hwElockTable' 
Electronic lock table. 
The index of this table are hwEnvEmuIndex that comes from hwEnvironmentInfoTable and hwElockIndex. 
hwEnvEmuIndex is the index of the monitoring unit whose monitoring type is door lock unit,
and hwElockIndex is the index of door lock that is smu.
hwElockEntry row .1.3.6.1.4.1.2011.6.1.1.11.1
Electronic lock table.
The index of this table are hwEnvEmuIndex that comes from hwEnvironmentInfoTable and hwElockIndex.
hwEnvEmuIndex is the index of the monitoring unit whose monitoring type is electric lock unit,
…
Indexes
Column Syntax OID
hwElockIndex
The index of electronic lock.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.11.1.1
hwElockName
Electronic lock type:
Ammeter-Compartment,
Device-Compartment,
Device1-Compartment,
Device2-Compartment,
HEX-Compartment,
MDF-Compartment,
MDF1-Compartment,
MDF2-Compartment,
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.6.1.1.11.1.2
hwElockEnableFlag
Enable/Disable a electronic lock.
Enable(1),
Disable(2),
invalid(-1)
Enumerationr/w
Enumerated Values:
-1invalid
1enable
2disable
 .1.3.6.1.4.1.2011.6.1.1.11.1.3
hwElockCommStatus
The state of the communication of the electric lock with the host.
unconfigured(2):The electronic has not been configured.
normal(9):The communication of the electronic with the host is normal.
faulty(10):The communicat…
Enumeration
Enumerated Values:
-1invalid
2unconfigured
9normal
10faulty
 .1.3.6.1.4.1.2011.6.1.1.11.1.4
hwElockCtrStatus
The status of electric lock.
statusOpen(1):The electronic door lock is open.
statusClose(0):The electronic door lock is closed.
statusNoElock(255):The electronic has not been enabled.
invalid: -1.
Enumerationr/w
Enumerated Values:
-1invalid
0statusClose
1statusOpen
255statusNoElock
 .1.3.6.1.4.1.2011.6.1.1.11.1.5

hwElockRightTable

table
.1.3.6.1.4.1.2011.6.1.1.12 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwElockRightTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ENVIRONMENT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ENVIRONMENT-MIB::hwElockRightTable' 
Electronic right card table. 
The index of this table are hwEnvEmuIndex that comes from hwEnvironmentInfoTable and hwElockRightCardId. 
hwEnvEmuIndex is the index of the monitoring unit whose monitoring type is door lock unit,
and hwElockRightCardId is the ID of right card.
hwElockRightEntry row .1.3.6.1.4.1.2011.6.1.1.12.1
Electronic right card table.
The index of this table are hwEnvEmuIndex that comes from hwEnvironmentInfoTable and hwElockRightCardId.
hwEnvEmuIndex is the index of the monitoring unit whose monitoring type is door lo…
Indexes
Column Syntax OID
hwElockRightCardId
The id of eletronic lock right card.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.1.1.12.1.1
hwElockRightElockIndexMask
000:indicates that the right card can not open any elock.
001:indicates that the right card can open the first elock.
010:indicates that the right card can open the second elock.
100:indicates that the right card can op…
OctetStringr/w
Constraints:
range: 3-3
range: 0-0
 .1.3.6.1.4.1.2011.6.1.1.12.1.2
hwElockRightRowStatus
Indicates the row status. To create an right card,
set this leaf to createAndGo(4). To delete an right card,
set this leaf to destroy(6).
When this leaf is queried, the value is fixed to active(1).
Options:
1. …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.6.1.1.12.1.3
hwElockRightStartTime
The start time of the door card authority.
field octets contents range
----- ------ -------- -----
1 1-4 year 0..9999
2 5-6 month 1..12
3 7-8 day 1..31
4 9-10 hour 0..24
5 11-12 m…
OctetStringr/w
Constraints:
range: 14-14
range: 0-0
 .1.3.6.1.4.1.2011.6.1.1.12.1.4
hwElockRightExpireTime
The expire time of the door card authority.
field octets contents range
----- ------ -------- -----
1 1-4 year 0..9999
2 5-6 month 1..12
3 7-8 day 1..31
4 9-10 hour 0..24
5 11-12 …
OctetStringr/w
Constraints:
range: 14-14
range: 0-0
 .1.3.6.1.4.1.2011.6.1.1.12.1.5

hwOpticalModuleTable

table
.1.3.6.1.4.1.2011.6.1.1.13 · 1 row entry · 2 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwOpticalModuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ENVIRONMENT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ENVIRONMENT-MIB::hwOpticalModuleTable' 
The indexes of this table are hwFrameIndex, hwOpticalModuleType, hwOpticalChnIndex and hwOpticalDevType.
The index hwFrameIndex comes from hwFrameTable.
hwOpticalModuleEntry row .1.3.6.1.4.1.2011.6.1.1.13.1
The indexes of this entry are hwFrameIndex, hwOpticalModuleType, hwOpticalChnIndex and hwOpticalDevType.
The index hwFrameIndex comes from hwFrameTable.
Indexes
Column Syntax OID
hwOpticalModuleType
The module type of optical node.
OctetString .1.3.6.1.4.1.2011.6.1.1.13.1.1
hwOpticalDevType
The dev type of optical node.
OctetString .1.3.6.1.4.1.2011.6.1.1.13.1.2