tyEnvTemperatureThresholdNotification
indicates the temperature have been exceed the threshold.
In the condition, user should check the hardware and the
environment of the entity, sometimes it happened because
of the failture of air-condition. Anyway, the threshold
should lower than the value that most service work fine.
hwEntityExtMonitorPortAbnormalNotification
.1.3.6.1.4.1.2011.5.25.31.2.0.10
The monitor port turns normal to abnormal.
hwEntityExtMonitorPortNormalNotification
.1.3.6.1.4.1.2011.5.25.31.2.0.11
The monitor port turns abnormal to normal.
hwEntityExtCpuUsageLowThresholdNotfication
.1.3.6.1.4.1.2011.5.25.31.2.0.12
tyExtCpuUsageThresholdNotfication indicates
the entity is overload, and the service running in the entity
will not get the performance it should because of CPU's
performance. Anyway, the threshold should lower than the
value that most service work fine.
hwEntityExtCpuUsageThresholdNotficationClear
.1.3.6.1.4.1.2011.5.25.31.2.0.13
tyExtCpuUsageThresholdNotficationClear indicates
the entity CPU usage fell below the threshold.
hwEntityExtMemUsageThresholdNotificationClear
.1.3.6.1.4.1.2011.5.25.31.2.0.14
tyExtMemUsageThresholdNotificationClear indicates
the memory usage fell below the threshold.
hwEntityExtProcessErrorNotification
.1.3.6.1.4.1.2011.5.25.31.2.0.15
tyExtProcessErrorNotification indicates
some important process had exception.
hwEntityExtDiskDamaged
.1.3.6.1.4.1.2011.5.25.31.2.0.16
tyExtDiskDamaged indicates
disk was damaged.
hwEntityExtDiskFull
.1.3.6.1.4.1.2011.5.25.31.2.0.17
tyExtDiskFull indicates
disk was full.
hwEntityExtHda1UsageThresholdNotfication
.1.3.6.1.4.1.2011.5.25.31.2.0.18
tyExtHda1UsageThresholdNotfication indicates
the hda1 usage is overload.
hwEntityExtHda1UsageResumeThresholdNotfication
.1.3.6.1.4.1.2011.5.25.31.2.0.19
tyExtHda1UsageResumeThresholdNotfication indicates
the hda1 usage fell below the resume threshold.
hwEntityExtVoltageLowThresholdNotification
.1.3.6.1.4.1.2011.5.25.31.2.0.2
tyExtVoltageLowThresholdNotification indicates
the voltage is lower than the threshold. This may decrease
the usability of the entity. If the voltage is lower too much
than the hardware needed, the entity will stop working.
Anyway, the threshold should higher than the value that
most service work fine.
hwEntityExtEncryptionCardFail
.1.3.6.1.4.1.2011.5.25.31.2.0.20
tyExtEncryptionCardFail indicates
the encryption card is faulty.
hwEntityExtHardDiskFull
.1.3.6.1.4.1.2011.5.25.31.2.0.21
tHardDiskFull indicates
that the hard disk's spare space is insufficient.
hwEntityExtHardDiskFullResume
.1.3.6.1.4.1.2011.5.25.31.2.0.22
tHardDiskFullResume indicates
that the hard disk's usage fell below the alarm clearing threshold.
hwEntityExtHardDiskPlugIn
.1.3.6.1.4.1.2011.5.25.31.2.0.23
tHardDiskPlugIn indicates
that the hard disk was plugged in.
hwEntityExtHardDiskPlugOut
.1.3.6.1.4.1.2011.5.25.31.2.0.24
tHardDiskPlugOut indicates
that the hard disk was pulled out.
hwEntityExtHardDiskOnline
.1.3.6.1.4.1.2011.5.25.31.2.0.25
tHardDiskOnline indicates
that the hard disk went online successfully.
hwEntityExtHardDiskOffline
.1.3.6.1.4.1.2011.5.25.31.2.0.26
tHardDiskOffline indicates
that the hard disk went offline.
hwEntityExtLPUPlugIn
.1.3.6.1.4.1.2011.5.25.31.2.0.27
tLPUPlugIn indicates
that the LPU was plugged in.
hwEntityExtLPUPlugOut
.1.3.6.1.4.1.2011.5.25.31.2.0.28
tLPUPlugOut indicates
that the LPU was pulled out.
hwEntityExtCpuUsageSuddenChangeNotification
.1.3.6.1.4.1.2011.5.25.31.2.0.29
The hwEntityExtCpuUsageSuddenChangeNotification indicates that the CPU usage suddenly changed.
hwEntityExtVoltageHighThresholdNotification
.1.3.6.1.4.1.2011.5.25.31.2.0.3
tyExtVoltageHighThresholdNotification indicates
the voltage is higher than the threshold. This may decrease
the usability of the entity. If the voltage is higher too much
than the hardware needed, the entity may be destroyed by the high
voltage. Anyway, the threshold should lower than the value
that most service work fine.
hwEntityExtMemoryUsageSuddenChangeNotification
.1.3.6.1.4.1.2011.5.25.31.2.0.30
The hwEntityExtMemoryUsageSuddenChangeNotification indicates that the memory usage suddenly changed.
hwEntityExtCPUOverInterfaceDown
.1.3.6.1.4.1.2011.5.25.31.2.0.31
The hwEntityExtCPUOverInterfaceDown indicates that the cpu usage reached the threshold for interface management ,and the interface was shutdown.
hwEntityExtDevConfigurationRecovered
.1.3.6.1.4.1.2011.5.25.31.2.0.32
tyExtDevConfigurationRecovered indicates
the device configuration was recovered.
hwEntityExtHotPatchReservedFirst
.1.3.6.1.4.1.2011.5.25.31.2.0.33
tyExtHotPatchReservedFirst indicates
the first reserved information of hot patch.
hwEntityExtHotPatchReservedSecond
.1.3.6.1.4.1.2011.5.25.31.2.0.34
tyExtHotPatchReservedSecond indicates
the second reserved information of hot patch.
hwEntityExtHotPatchReservedThird
.1.3.6.1.4.1.2011.5.25.31.2.0.35
tyExtHotPatchReservedThird indicates
the third reserved information of hot patch.
hwEntityExtHotPatchReservedFourth
.1.3.6.1.4.1.2011.5.25.31.2.0.36
tyExtHotPatchReservedFourth indicates
the fourth reserved information of hot patch.
hwEntityExtHotPatchReservedFifth
.1.3.6.1.4.1.2011.5.25.31.2.0.37
tyExtHotPatchReservedFifth indicates
the fifth reserved information of hot patch.
hwEntityExtSDCardFsErrorAlarm
.1.3.6.1.4.1.2011.5.25.31.2.0.38
tyExtSDCardFsErrorAlarm indicates
the SDCard was damaged.
hwEntityExtSDCardFsErrorResume
.1.3.6.1.4.1.2011.5.25.31.2.0.39
tyExtSDCardFsErrorResume indicates
the SDCard was restored.
hwEntityExtCpuUsageThresholdNotfication
.1.3.6.1.4.1.2011.5.25.31.2.0.4
tyExtCpuUsageThresholdNotfication indicates
the entity is overload, and the service running in the entity
will not get the performance it should because of CPU's
performance. Anyway, the threshold should lower than the
value that most service work fine.
hwEntityExtSDCardUsageOver
.1.3.6.1.4.1.2011.5.25.31.2.0.40
tyExtSDCardUsageOver indicates
the SDCard usage is overload.
hwEntityExtSDCardUsageBelow
.1.3.6.1.4.1.2011.5.25.31.2.0.41
tyExtSDCardUsageBelow indicates
the SDCard usage fell below the resume threshold.
hwEntityExtCFCardFaultAlarm
.1.3.6.1.4.1.2011.5.25.31.2.0.42
tyExtCFCardFaultAlarm indicates
the CFCard was damaged.
hwEntityExtCFCardFaultResume
.1.3.6.1.4.1.2011.5.25.31.2.0.43
tyExtCFCardFaultResume indicates
the CFCard was restored.
hwEntityNVRAMFaultAlarmNotification
.1.3.6.1.4.1.2011.5.25.31.2.0.44
tyNVRAMFaultAlarmNotification indicates
the main NVRAM was damaged.
hwEntityNVRAMFaultResumeNotification
.1.3.6.1.4.1.2011.5.25.31.2.0.45
tyNVRAMFaultResumeNotification indicates
that it was successful to switch main NVRAM to backup NVRAM .
hwEntityExtBootPasswordAlarm
.1.3.6.1.4.1.2011.5.25.31.2.0.46
tyNVRAMFaultResume indicates
that the BootLoader password is not set, which poses security risks. You are advised to change the password.
hwEntityExtSmallBootPasswordAlarm
.1.3.6.1.4.1.2011.5.25.31.2.0.47
tyExtSmallBootPasswordAlarm indicates
that the small boot password was initial password and needed to change.
hwEntityExtCpuUsageNotfication
.1.3.6.1.4.1.2011.5.25.31.2.0.48
The hwEntityExtCpuUsageNotfication indicates the entity is overload, and the service running in the entity will not get the performance it should because of CPU's performance. Anyway, the threshold should lower than the value that most service work fine.
hwEntityExtCpuUsageNotficationClear
.1.3.6.1.4.1.2011.5.25.31.2.0.49
The hwEntityExtCpuUsageNotficationClear indicates the entity CPU usage fell below the threshold.
hwEntityExtMemUsageThresholdNotification
.1.3.6.1.4.1.2011.5.25.31.2.0.5
tyExtMemUsageThresholdNotification indicates
the entity is overload, and the service running in the entity
will not get the performance it should because of lower
memory. Anyway, the threshold should lower than the
value that most service work fine.
hwEntityExtHardDiskOnlineFail
.1.3.6.1.4.1.2011.5.25.31.2.0.50
indicates
that the hard disk went online fail.
hwEntityExtHardDiskOfflineFail
.1.3.6.1.4.1.2011.5.25.31.2.0.51
indicates
that the hard disk went offline fail.
hwEntityExtOperEnabled
.1.3.6.1.4.1.2011.5.25.31.2.0.6
is operational. The entity this
notification refers can be identified by
extracting the entPhysicalIndex from one of the
variable bindings.
hwEntityExtOperDisabled
.1.3.6.1.4.1.2011.5.25.31.2.0.7
is operational. The entity this
notification refers can be identified by
extracting the entPhysicalIndex from one of the
variable bindings.
hwEntityExtMonitorBoardAbnormalNotification
.1.3.6.1.4.1.2011.5.25.31.2.0.8
The monitor board turns normal to abnormal.
hwEntityExtMonitorBoardNormalNotification
.1.3.6.1.4.1.2011.5.25.31.2.0.9
The monitor board turns abnormal to normal.
hwBoardSoftwareVersionIncompatible
.1.3.6.1.4.1.2011.5.25.31.2.2.1
Board software version incompatible with basic software version.
hwEntityHigStateDownNotify
.1.3.6.1.4.1.2011.5.25.31.2.2.10
When the state of Serdes channel is always down, send a SNMP trap to network manager.
hwEntityPositionMismatchNotify
.1.3.6.1.4.1.2011.5.25.31.2.2.11
When the board type and slotID is mismatch,send a SNMP notify to network manager.
hwEntityRuntPacketCheckNotify
.1.3.6.1.4.1.2011.5.25.31.2.2.12
When the statistics of runt packets is more than the threshold, send a SNMP trap to network manager.
hwBoardDropRuntPacketNotify
.1.3.6.1.4.1.2011.5.25.31.2.2.13
When the statistics of dropped runt packets on the board is more than the threshold, send a SNMP trap to network manager.
hwEntityHigDiscardPacketNotify
.1.3.6.1.4.1.2011.5.25.31.2.2.14
When the congistion drop packets of HIG port are more than the threshold, send a SNMP trap to network manager.
hwEntitySerdesChangeNotify
.1.3.6.1.4.1.2011.5.25.31.2.2.15
When the CRC errors of Fic port are more than the threshold, send a SNMP trap to network manager.
hwEntitySerdesDownNotify
.1.3.6.1.4.1.2011.5.25.31.2.2.16
When the state of Fic port is always down, send a SNMP trap to network manager.
hwEntityHigCrcErrorAlarm
.1.3.6.1.4.1.2011.5.25.31.2.2.17
When the CRC errors of HIG port are more than the threshold, send a SNMP alarm trap to network manager.
hwEntityHigCrcErrorAlarmResume
.1.3.6.1.4.1.2011.5.25.31.2.2.18
When the number of CRC errors on the HIG port falls below the threshold, an SNMP trap is sent to the network manager.
hwEntityHigDown
.1.3.6.1.4.1.2011.5.25.31.2.2.19
When the state of Serdes channel is always down, send a SNMP trap to network manager.
hwBoardSplitPorts
.1.3.6.1.4.1.2011.5.25.31.2.2.2
When the split ports exist on the board, send a SNMP trap to network manager.
hwEntityHigDownResume
.1.3.6.1.4.1.2011.5.25.31.2.2.20
When the Serdes channel goes Up, an SNMP trap is sent to the network manager.
hwEntityInputRateThresholdAlarm
.1.3.6.1.4.1.2011.5.25.31.2.2.3
When the input usage of channel is more than the threshold of alarm, send a SNMP trap to network manager.
hwEntityInputRateThresholdAlarmResume
.1.3.6.1.4.1.2011.5.25.31.2.2.4
When the input usage of channel is less than the threshold of resume, send a SNMP trap to network manager.
hwEntityOutputRateThresholdAlarm
.1.3.6.1.4.1.2011.5.25.31.2.2.5
When the output usage of channel is more than the threshold of alarm, send a SNMP trap to network manager.
hwEntityOutputRateThresholdAlarmResume
.1.3.6.1.4.1.2011.5.25.31.2.2.6
When the output usage of channel is less than the threshold of resume, send a SNMP trap to network manager.
hwEntityStatusChange
.1.3.6.1.4.1.2011.5.25.31.2.2.7
The entity status was changed.
hwEntityHigErrorPacketThresholdAlarm
.1.3.6.1.4.1.2011.5.25.31.2.2.8
When the CRC errors of HIG port are more than the threshold, send a SNMP trap to network manager.
hwEntityHigStateChangeNotify
.1.3.6.1.4.1.2011.5.25.31.2.2.9
When the CRC errors of Serdes channel are more than the threshold, send a SNMP trap to network manager.
hwHardwareCapaChangeNotification
.1.3.6.1.4.1.2011.5.25.31.5.2.1
This object indicates the change of the 'hardware capability file'. An alarm is generated if the sequence number of the 'hardware capability file' in the current startup file is different from that in the last startup file.
hwAlarmPnPChangeNotification
.1.3.6.1.4.1.2011.5.25.31.5.2.2
This object indicates the change of the 'alarm capability file'. An alarm is generated if the sequence number of the 'alarm capability file' in the current startup file is different from that in the last startup file.
hwEntityHeartbeatTrap
.1.3.6.1.4.1.2011.5.25.31.7.2.1
Heartbeat trap.
hwInsertDiffFromPreDisposed
.1.3.6.1.4.1.2011.5.25.31.8.2.1
This object indicates the type of the inserted entity is different from that of pre-disposed entity on the slot.
hwPreDisposedChangeNotification
.1.3.6.1.4.1.2011.5.25.31.8.2.2
This object indicates the change of the 'predispose capability file'. An alarm is generated if the sequence number of the 'predispose capability file' in the current startup file is different from that in the last startup file.